Search Results

Search found 34186 results on 1368 pages for 'single machine'.

Page 401/1368 | < Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >

• ASUS P8B WS - Endless Reboots

  - by tuxGurl

  I am running a Intel XEON 1245 with 4GBx2 Kingston Memory ECC Unbuffered DDR3 on an ASUS P8B WS motherboard. BIOS Version 0904 x64. This system is a little over a month old. It is running Ubuntu 11.10. This evening I found the machine turned off. When I tried to restart it, it would POST and stop at the GRUB screen. When I selected Ubuntu and hit enter within 2-3 seconds the would shutdown and restart. If I stayed at the GRUB screen and did nothing the system would not cut out. I tried booting off a USB stick and again 2-3 seconds after selecting 'Try Ubuntu without Installing' the machine will cut power and reboot. Things I have tried so far: Resetting the BIOS using the on board jumper Resetting the BIOS settings to default Disconnecting all external hardware - except keyboard & monitor Booting with 1 stick of RAM - I tried different single sticks Ensured that onboard EPU and GPU boost switches are in the off position. I am running a Memtest86 right now and it has been running for 38+ minutes. This is not an OS problem or an overheating issue (I have a CoolerMaster HAF Case with 3 fans besides the CPU fan) I am at a loss as to what to try next. I think the BIOS is mis-configured somehow but I don't know what to look for.

  Read the article

• Intermittent "Lost connection to MySQL server at 'reading initial communication packet'"

  - by db2

  Our web environment consists of two servers. Web front-end. Dell PowerEdge R610, RHEL 5.5, Apache 2.2.17, php 5.2.14. Database server. Dell PowerEdge R710, Windows 2008 R2 Standard x64, MySQL 5.5.11-log x64. Normally these two work perfectly fine together. However, when I try to get them talking via a dedicated LAN on their secondary NICs (each machine has four of them), things get flaky. I have NIC #2 on both machines configured on the 172.16.1.0/24 subnet, with no gateway or DNS servers (obviously, since it's just those two systems), and I put the private IP address of each machine into the hosts file of the other. The routing tables on both machines look okay after I do this. I've tried this with both a crossover cable draped directly between the two NICs, and also via a dedicated vlan on the switch in the rack. In either case, I get intermittent connection problems. It's a fairly small percentage of connections that fail, but it's enough to cause a significant problem, and I have to switch back to the main network connection, which will contend with all the other traffic and hosts on the switch. The full error message that appears in the application log: SQLSTATE[HY000] [2013] Lost connection to MySQL server at 'reading initial communication packet', system error: 110 Am I doing something really dumb that's causing this to not work properly? Anything I can check in MySQL that would explain why it's failing to connect occasionally?

  Read the article

• Throttle CPU Usage consumed by Process

  - by Brett Powell

  We run a game-server company where we basically have large amounts of customers sharing a single machine, and are just on their own instance of a Java Process (Minecraft) managed by our Web Control Panels. In the last few game updates released, we have noticed that many of the third-party plugins our customer's use have become poorly written and we are frequently seeing huge CPU increases from certain servers until we manually kill the process. Our Game Panel automatically restarts processes, so killing them is not really an issue. Our problem is that once once of these servers starts consuming 50%+ CPU Usage, it takes atleast 5 minutes to RDP into the machine, locate who it belongs to, shut it down and notify them. Are there any current solutions for Server 2008 which allow for the throttling of CPU usage or worst case, just auto kill a process stuck using that much? As Minecraft is essentially a single-threaded application, we have investigated using Affinity, although with the variations in our Packages and fluctuations in usage, this doesn't work well for us. Some option to throttle the maximum usage a process can use would be perfect, or at least the option to kill a process using that much. Thanks!

  Read the article

• How can I get the root account to generate an acceptable ssh key?

  - by Jamie

  On an ubuntu machine I did the following: ~$ sudo su - [sudo] password for jamie: root@mydomain:~# ssh-keygen -t rsa Generating public/private rsa key pair. Enter file in which to save the key (/root/.ssh/id_rsa): Enter passphrase (empty for no passphrase): Enter same passphrase again: Your identification has been saved in /root/.ssh/id_rsa. Your public key has been saved in /root/.ssh/id_rsa.pub. The key fingerprint is: 12:34:56:78:9a:bc:de:f0:12:34:56:78:9a:bc:de:f0 [email protected] The key's randomart image is: +--[ RSA 2048]----+ | | | | | | | | | | | | | | | | | | +-----------------+ root@mydomain:~# cat /root/.ssh/id_rsa.pub | ssh -p 443 [email protected] 'cat > authorized_keys' [email protected]'s password: root@mydomain:~# ssh -p 443 [email protected] [email protected]'s password: It's asking me for a password. However, using a regular account, the following works: $ cd ; ssh-keygen -t rsa ; cat ~/.ssh/id_rsa.pub | ssh [email protected] 'cat >> ~/.ssh/authorized_keys' $ ssh [email protected] Last login: Thu Oct 24 14:48:41 2013 from 173.45.232.105 [[email protected] ~]$ Which leads me to believe it's not an issue of authorized_keys versus authorized_keys2 or permissions. Why does the 'root' account accessing the remote 'jamie' account not work? The remote machine is CentOS if that's relevant.

  Read the article

• How do I use .htaccess conditional redirects for multiple domains?

  - by John

  I'm managing about 15 or so domains for a particular promotion. Each domain has specific redirects in place, as shown below. Rather than make 15 different .htaccess files that I would later have to manage separately, I'd like to use a single .htaccess file and use a symbolic link into each website's directory. The trouble is that, I can't figure out how to make the rules apply only for a specific domain. Every time I visit www.redirectsite2.com, it sends me to www.targetsite.com/search.html?state=PA&id=75, when it should instead be sending me to www.targetsite.com/search.html?state=NJ&id=68. How exactly do I make multiple RewriteRules apply for a given domain and only that domain? Is this even possible to do within a single .htaccess file? Options +FollowSymlinks # redirectsite1.com RewriteEngine On RewriteBase / # start processing rules for www.redirectsite1.com RewriteCond %{QUERY_STRING} ^$ RewriteCond %{HTTP_HOST} ^www\.redirectsite1\.com$ # rule for organic visit first RewriteRule ^$ http://targetsite.com/search.html?state=PA&id=75 [QSA,R,L] RewriteRule ^PGN$ http://targetsite.com/search.html?state=PA&id=26 [QSA,R,NC,L] RewriteRule ^NS$ http://targetsite.com/search.html?state=PA&id=27 [QSA,R,NC,L] RewriteRule ^INQ$ http://targetsite.com/search.html?state=PA&id=28 [QSA,R,NC,L] RewriteRule ^AA$ http://targetsite.com/search.html?state=PA&id=29 [QSA,R,NC,L] RewriteRule ^PI$ http://targetsite.com/search.html?state=PA&id=30 [QSA,R,NC,L] RewriteRule ^GV$ http://targetsite.com/search.html?state=PA&id=31 [QSA,R,NC,L] # catch-all rule, using the same id as the organic visit RewriteRule ^([a-z]+)?$ http://targetsite.com/search.html?state=PA&id=75 [QSA,R,NC,L] # end processing rules for www.redirectsite1.com # begin rules for redirectsite2.com RewriteCond %{QUERY_STRING} ^$ RewriteCond %{HTTP_HOST} ^www\.redirectsite2\.com$ # rule for organic visit first RewriteRule ^$ http://targetsite.com/search.html?state=NJ&id=68 [QSA,R,L] RewriteRule ^SL$ http://targetsite.com/search.html?state=NJ&id=6 [QSA,R,NC,L] RewriteRule ^APP$ http://targetsite.com/search.html?state=NJ&id=8 [QSA,R,NC,L] # catch-all rule, using the same id as the organic visit RewriteRule ^([a-z]+)?$ http://targetsite.com/search.html?state=NJ&id=68 [QSA,R,NC,L] Thanks for any help you may be able to provide!

  Read the article

• Cent OS ifcfg configuration for ranges of IP's with different netmask

  - by Aaron Schlegel

  I have 1 set of 30 public IP's with a netmask of 255.255.255.0 and another set of 30 IP's with a netmask of 255.255.255.128. Both sets of IP's also have different gateways. How can I virtually assign the IP's to the machine? I have tried creating ifcfg-eth0:0 ifcfg-eth0:1 ifcfg-eth0:X ect for each IP. Below is my ifcfg file with. I have this for each IP with the correct gateway IP and netmask for each of my 60 IP's. If I do ip addr show it does show all of the 60 addresses with the correct broadcast IP and netmask. However I can only use 30 of my IP's that are from the same netmask. Am I doing this correctly? If the IP's show up with ip addr show does that mean I have correctly assigned them to the machine virtually? I want to check before I blame my hosting company for not routing the IP's correctly. DEVICE="eth0:1" BOOTPROTO="static" DNS1="**.**.**.**" DNS2="**.**.**.**" GATEWAY="2**.**.***.126" HOSTNAME="localhost.localdomain" HWADDR="0*:19:**:**:**:**" IPADDR="2**.*.**.**" IPV6INIT="no" MTU="1500" NETMASK="255.255.255.128" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" Also is there a better way to do this? I have used ifcfg-eth0:0-range1 before to assign a range of IP's from the same netmask. Is it possible to do this with ranges with different netmask? Thanks!

  Read the article

• Can't access server on LAN new Router

  - by RMDan

  Earlier this week my roommates decided to change the router we are using for our home network. On the old router I had no problems accessing a laptop running Mint Linux over the network(SSH, FTP, and Shared Folders). However I am now not able to connect. I have verified the IP address of my Linux machine has not changed and I have no problems connecting to our NAS(WDMYCLOUD). The new router is a D-Link DIR-868L. PuTTY is giving me a Timed Out error(was giving me a EHOSTUNREACH before). Running Windows 8.1 the connecting laptop, but tried connecting using my phone via SSH did not work either. More information: Can ping the Linux machine from the router but not my computer. Pinging 192.168.0.111 with 32 bytes of data: Reply from 192.168.0.102: Destination host unreachable. Reply from 192.168.0.102: Destination host unreachable. Reply from 192.168.0.102: Destination host unreachable. Reply from 192.168.0.102: Destination host unreachable. Ping statistics for 192.168.0.111: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

  Read the article

• XP CD doesn't offer repair option

  - by SLaks

  I'm fixing an IBM Thinkpad laptop running XP Pro which doesn't boot all the way (It gets past the XP logo boot screen, a movable mouse cursor appears, and it doesn't get any further, even in safe mode) after being bumped a bit. I'd like to do a repair install. I booted it to an XP Pro CD, but the Repair install option (not recovery console) doesn't appear. After pressing F8 to accept the EULA, it says, Loading setupp.ini, then immediately goes to a partition list (it never says Searching for previous installations of Microsoft Windows). If I select the partition, it warns me that there is already a Windows installation in that partition, and that it will be completely obliterated if I continue. (So I know that it does see the contents of the hard disk) I booted the same CD in an XP virtual machine, and it offered to repair the XP installtion in the virtual machine, so the problem isn't with the CD. Does anyone know how make it do a repair install (or have any other ideas to solve the problem?) It might not show up because it's an OEM installation (but not an OEM CD), but that's just a guess.

  Read the article

• Looking for a help desk ticketing system..

  - by Dan

  Hi guys Im looking for a good help desk ticket solution. It must perform the following actions for it to be useful. It needs to have a single point of contact via email..e.g [email protected] If we recieve a telephone(or an email outside of the system) we need to be able to create a ticket as if had been added via the single point of contact, this needs to be done with ease in order to save time. Certain people within our organisation deal with certain customers, so if the email/ custom input support call as mentioned in bullet 2 is picked up as having a relationship with that certain person in our organisation it needs to be sent to them/put in their queue for them to work on. If a person is out of office or sick any tickets sent to them must be forwarded to somebody else or put into a seperate pool of tickets that anybody can access. Perhaps have an agent that sorts through tickets in the pool and assigns them to anybody who is available, preferably the person with fewest tickets in their queue/list. Once a customer emails and the system logs it they immediately get a response with a ticket number and maybe details of who is dealing with the problem. Any correspondance in relation to a particular ticket is automatically grouped into some sort of message, and not made into a load of separate tickets. I.e system scans incoming email subjects for ticket numbers and assosciates it with exisiting tickets if that number exists. Any help is much appreciated Thanks P.S I have taken a look at OTRS but i'm not feeling it so unless someone can convince me I guess i'm after an alternative.

  Read the article

• Adding PHP to Apache

  - by user528451

  Where I work, we use ancient technology that belongs in a museum. Further I have to get everything done through system admins. They are telling me in order to get PHP, they will need to upgrade the operating system as well as the Apache version. lcas100[67]% uname -a Linux lcas100 2.6.9-11.ELsmp #1 SMP Fri May 20 18:26:27 EDT 2005 i686 i686 i386 GNU/Linux lcas100[68]% cat /etc/*-release LSB_VERSION="1.3" Red Hat Enterprise Linux AS release 4 (Nahant) lcas100[75]% /ots/apache/bin/httpd -v Server version: Apache/1.3.31 (Unix) Server built: Nov 3 2004 18:47:31 This doesn't make sense to me because apparently Apache 1.3.x supports PHP: http://php.net/manual/en/install.unix.apache.php Furthermore, we have another machine that runs PHP and is running the exact same OS and OS version. The reason I want it on the former machine is because it is mounted on a different file system. Lastly they tell me that all software the Apache webserver runs will need to be reinstalled/recompiled (assuming an Apache upgrade WAS needed). I am not even sure about this. Are they full of it? Thanks

  Read the article

• Black Screen and System Hang - Possibly CPU overheating

  - by Mahesh

  I have this old computer - P4 2.0ghz, 1.2GB RAM and onboard graphics(no external card), 80GBHDD. It has xubuntu installed on it and it regularly hangs when it takes more system resources for say like graphical programs, too many tabs on firefox etc. It just either hangs the system or shows black screen. Tested if it was issue of HD but it wasn't because i have used linux livecd and problem is still the same even if I have removed the HD. I have also tested with USB linux (puppy linux and ubuntu linux on 8gb drives). Tested windows XP as well on this HD and results are the same. Tested another HD on this machine, results are still the same with it. System hangs or goes black screen and requires restart. I thought later it could be thermal heat issue and then applied thermal paste on heatsink but still it fails to work for me. It continues to show symptoms. Another thing which was yet to be tested is changing of CPU fan which was not done because I have not found any fan for old pentium 4 machine in the market. I have to hit online stores (but i am in india and it's hard to find it in online shops which can deliver it to me). So far I don't see this as HD or Monitor or OS issue because I have tested with other HD and results are the same. So it could be either CPU fan or motherboard? What could be possible issue with the hardware?

  Read the article

• Magento Apache Config & Memory Issues

  - by cheshirepine

  I have a Magento installation on a VPS that is giving me a headache. This particular VPS has a reasonable spec - 2gb Memory and 50gb storage. It runs a single domain, with a single Magento install - and nothing else. About 5 months ago we started having issues. Every so often (about once every 2 or 3 weeks) the VPS would crash - all processes stopped and the only way to restart the container is via Virtuozzo. Now, however its 2 or 3 times a week. My VPS hosts confirm I am breaching the 2gb memory limit, at which point all VPS processes are killed to stop it bringing the entire node down. I have not made any config changes to it at all - I was running New Relic on it for a short while, but have removed that in case it was contributing to the issues. I can see nothing in the logs which indicates an issue and we have no CRON jobs running at the time the crashes happen. The site generates steady, but not huge amounts of traffic (averaging usually less than 100 visits per day) Is there anything in particular I should have done to the Apache or PHP configs to help? Im not a massivley experienced Apache admin, but know more than enough to solve most problems... Failing that, any other ideas that might help? Can't afford for this site to be down this much.

  Read the article

• GRE Tunnel over IPsec with Loopback

  - by Alek

  I'm having a really hard time trying to estabilish a VPN connection using a GRE over IPsec tunnel. The problem is that it involves some sort of "loopback" connection which I don't understand -- let alone be able to configure --, and the only help I could find is related to configuring Cisco routers. My network is composed of a router and a single host running Debian Linux. My task is to create a GRE tunnel over an IPsec infrastructure, which is particularly intended to route multicast traffic between my network, which I am allowed to configure, and a remote network, for which I only bear a form containing some setup information (IP addresses and phase information for IPsec). For now it suffices to estabilish a communication between this single host and the remote network, but in the future it will be desirable for the traffic to be routed to other machines on my network. As I said this GRE tunnel involves a "loopback" connection which I have no idea of how to configure. From my previous understanding, a loopback connection is simply a local pseudo-device used mostly for testing purposes, but in this context it might be something more specific that I do not have the knowledge of. I have managed to properly estabilish the IPsec communication using racoon and ipsec-tools, and I believe I'm familiar with the creation of tunnels and addition of addresses to interfaces using ip, so the focus is on the GRE step. The worst part is that the remote peers do not respond to ping requests and the debugging of the general setup is very difficult due to the encrypted nature of the traffic. There are two pairs of IP addresses involved: one pair for the GRE tunnel peer-to-peer connection and one pair for the "loopback" part. There is also an IP range involved, which is supposed to be the final IP addresses for the hosts inside the VPN. My question is: how (or if) can this setup be done? Do I need some special software or another daemon, or does the Linux kernel handle every aspect of the GRE/IPsec tunneling? Please inform me if any extra information could be useful. Any help is greatly appreciated.

  Read the article

• Windows Server 2003 DHCP not handing out IPs

  - by SnOrfus

  I'm trying to setup a home server (to tinker with) as a domain controller. I've setup the domain and I've installed DHCP and setup a scope without any exclusions (with the default range of 192.168.0.1-254). My client machine is a Windows 7 (RC) machine and it has a connection but can't get an IP address. Even if I try setting the IP to a static 192.168.0.2 and there is still no connectivity. I can ping it from the server, but pinging the server from the client just times out. The only thing between the server and the client is a 24 port switch (D-Link DES-1024D). edit Ok, it turned out that the interfaces were setup backwards in the NAT settings (the internal nic connection was set to public and the external nic connection was set to private). I changed this and all was OK.... sort-of. Problem is now: If I set a static ip on the client (where I am typing this from) all is fine. BUT; when I set it to get it from DHCP, I get a correct IP from the server (192.168.0.2) but there is no internet on the client; but I can still ping the server fine from the client (which makes sense cause I was able to get an IP from it). edit I ended up just removing the Routing and DHCP server roles and just going with ICS for the time being until I get my hands on some better learning tools.

  Read the article

• Openfire on EC2 with Jingle

  - by Bjorn Roche

  I would like to run Openfire (or another XMPP server) on EC2. At the moment this is just for testing, so easy setup and configuration are important, as is low cost. At some point, however, if things go well, it will be important to scale this. Ideally, it would be nice to not have to switch software when the scaling happens, but if a switch needs to happen later it certainly can. My requirements are: basic XMPP services, including muc and pubsub. Logins controlled from an external API. Preferably, when a user attempts to connect, the XMPP server checks with the api to see if their username and password are correct, but I can also have the API keep the XMPP server up to date on new users, deleted users, pasword changes and so on. I see Openfire has a "user service" API. Not ideal, but it looks workable. Jingle, including relay and STUN. It's not at all clear to me if the Jingle Nodes plugin takes care of this. I'm a bit confused about what's required to set this up, and I'd rather know in advance than be confused along the way :). eg It seems like STUN servers require more than one IP address. Can Openfire do all this for me, including stun and media relay on a single machine? Is this hard to configure on EC2 with Openfire? What are the basic steps? Would this be easier with something else like, say Tigase? What about database? Should I use amazon's database service, or run a db on the same machine? Would the server be compatible with a service like http://www.siteuptime.com/ Thanks!

  Read the article

• Cisco SA520 to Adtran 1234 no DHCP transfer

  - by Grico

  I am trying to set up a Cisco SA520 to run DHCP on my network. I have a vendor provided switch, the Adtran 1234, and it provides DHCP for our phone systems on VLAN 200. I do not have access to the Adtran, but the vendor gave me a IP on port 1 for WAN and said port 2 should be for the "trust" side should go. I did setup a mini lab where, Adtran 1 went to SA520 WAN port, and SA520 trust 1 went to my laptop. Everything worked fine, I could ping and get internet using the DHCP scope I put on the SA520. I then unplugged my computer from SA520 trust 1 and plugged it into Adtran 2. I plugged my computer into Adtran 23 and I dont get DHCP or even a link light. If I restart my machine, I get a brief link and then it dies once the machine boots. I have tried several ports on the Adtran and none seem to work. Different cables as well. However, when I plug a phone into the Adtran, the phone boot immediately and shows link. Thoughts?

  Read the article

• Windows xp mapped drives disconnect from Windows 7 on Peer to Peer network

  - by Kathryn Codo

  I have a 5 user peer to peer network. 2-XP machines, 3- Windows 7 machines and a Windows 7 machine acting as the file server. I have NO issues with the Windows 7 machines staying connected via the mapped drives to the "server". However, once a day the 2 XP machines will not connect to the Windows 7 machine "server" via the mapped drives. I must restart the "server" in order to see the server and access the files via the mapped drives or Explorer. I have tried the persistent : yes command in NET USE, on the XP machines and also setting a static IP address on the "server". I've turned the firewall off on the "server:, no difference so I turned the firewall back on. No interruption occurs with the internet when this happens, just can't see the server. Again, the Windows 7 users are unaffected. I have gone into the advanced network settings on the "server" and added read/write permissions for Everyone as well as the users of the XP machines. I have double checked that we are all on the same WORKGROUP. I'm at a loss. It seems to happen around mid-day and I've not been able to find any activity that is happening at this time (Like someone plugging in a thumbdrive). Any suggestions would be greatly appreciated as my client is running old XP software he no longer has the disks for and needs for his engineering firm.

  Read the article

• Hyper-V Guests Dying

  - by Jon Rauschenberger

  I just hit my THIRD instance of a Hyper-V guest machine dying with the exact same behavior. In all three instances we are hosting WS2008 guests on a WS2008 host. AFter a config change, we reboot the guest and the guest OS comes up but in a very cripled state. Specifically, we are able to log into the guest, but can't launch any apps and the guest never comes active on the network. I opened a support ticket with MS the second time this happened and they focused in on the DCOM subsystem not coming up...best explanation they could provide was that permissions on key system files got corrupted. I eventually gave up on the ticket after close to 10 hours on the phone trying different things that were going no where. What really concerns me is that we have now seen the exact same thing happen to a guest hosted on a completly differet host machine. There is zero hardware overlap between the two. Has anyone seen this before?? It's really odd behavior, but it also seems like there's a pattern here that's concerning me. Thanks, jon

  Read the article

• No Outbound Internet on Windows Home Server

  - by Kyle B.

  Could someone provide some steps for me to check my internet connection on my Windows Home Server? It seems to have intermittent connectivity issues and I am unsure of how to diagnose the problem because it is a headless (no monitor, no keyboard) machine so the only way to get to the device is via remote desktop (which works fine). When connected to the machine, it doesn't pull up any microsoft.com sites and some other sites it does pull up (i.e. gmail.com) and some it doesn't (stackoverflow.com). To make matters more complicated, it has worked intermittently in the past for reasons unknown. Are there tools I can use to properly diagnose the reason for the connection failure? I can ping 127.0.0.1 just fine, I have internet working on my other router-connected machines, so I'm not sure why this one would fail. Any suggestions would be much appreciated and up-voted :) ** edit - thanks for suggestions guys, I'm going to try these tonight and will update my post. ** edit #2 - I hoping this is a more permanant fix, but I have both changed my port on the router as well as restarted the router at the same time. The internet (for the moment) appears to be working. I will be sure to try everything we have discussed should this problem persist. Thanks, Kyle

  Read the article

• Running the LibreOffice MSI installer in English

  - by Scott Severance

  I'm trying to install LibreOffice on a machine running a Korean version of Windows XP. I don't know Korean. I haven't used Windows with any frequency in many years, so I'm pretty lost. When I run the installer, it shows up in Korean. But, I want to customize the installation, so I need the installer to be in English. Googling took me to this page, where I found an example command to run the installer in Gaelic, which I modified for my system as follows: msiexec /i LibO_3.6.1_Win_x86_install_multi.msi TRANSFORMS=:1084 This works, except that I know less about Gaelic than I do about Korean. The help page provided a link to a page where I could look up the ID codes. From that page, I determined that the correct code was 1033 for US English and 2057 for UK English. When I substituted the code, I got an error message. Here's the messages as translated by Google, followed by the original: Transform can not be applied.Verify that the specified transform paths are valid. ?? ??? ??? ? ????. ??? ?? ??? ???? ?????. I can't very well search on a machine translation, so I don't know where to go from here.What is the problem? How can I make the installer operate in English? Alternatively, how can I change XP to display its interface in English, while keeping full functionality for typing in Korean?

  Read the article

• Windows Server 2003 DHCP not handing out IPs

  - by SnOrfus

  I'm trying to setup a home server (to tinker with) as a domain controller. I've setup the domain and I've installed DHCP and setup a scope without any exclusions (with the default range of 192.168.0.1-254). My client machine is a Windows 7 (RC) machine and it has a connection but can't get an IP address. Even if I try setting the IP to a static 192.168.0.2 and there is still no connectivity. I can ping it from the server, but pinging the server from the client just times out. The only thing between the server and the client is a 24 port switch (D-Link DES-1024D). edit Ok, it turned out that the interfaces were setup backwards in the NAT settings (the internal nic connection was set to public and the external nic connection was set to private). I changed this and all was OK.... sort-of. Problem is now: If I set a static ip on the client (where I am typing this from) all is fine. BUT; when I set it to get it from DHCP, I get a correct IP from the server (192.168.0.2) but there is no internet on the client; but I can still ping the server fine from the client (which makes sense cause I was able to get an IP from it). edit I ended up just removing the Routing and DHCP server roles and just going with ICS for the time being until I get my hands on some better learning tools.

  Read the article

• Windows 7 on an EEE PC 901 - Is it a practical change?

  - by Dave

  I am currently running WinXP on my EEE PC 901, and I'm happy to say that it runs really well. But this did not come with out significant manipulation of the OS. Here's the basic steps I took: Install XP Modify registry to install Install bare essential drivers Relocate page file to d:\ (remember, this model has two SSD's, one roughly 3.6gb, and the other roughly 16gb - XP won't run on the bigger drive, only the smaller one) Install remaining drivers skip normal updates, install service pack 2 straight away. modify system registry to place service pack backup folder into new Program Files directory on D drive (where software is being installed). Change My Documents folder to sit on D drive. Install .net framework Install remaining updates and service pack 3 (the hidden backup folders in the c:\Windows directory are deleted after every update as well as the contents of the service pack downloads folder in order to continually free up space). I have also found that Disktrix UltimateDefrag to be brilliant at keeping the system clean and tidy. This is roughly the order I did things in. In this configuration the machine works really well. QUESTION: Can this kind of configuration be implemented with Windows 7 to achieve the same result on this machine? Thanks in advance. Dave.

  Read the article

• What benchmark tool to use to benchmark hardware for VM server?

  - by Mark0978

  We are setting up a new piece of hardware to virtualize several of our servers on. Choices are RAID 5, RAID 6, and RAID 0+1. We are wanting to benchmark all three before we go live with the machine, but I'm not sure how to test the speed. Since we will be using it to host VMs, what will the actual disk traffic look like? What can I use to see if RAID 6 is too slow? Short of setting up the system with all the VM's on it and running that way, then redoing on all the work, I'm not sure how to test it. It them becomes more of a subjective test than an objective one. I'm worried that RAID6 will have too much overhead, that RAID5 will be to fragile with 3TB drives and I've never worked with 0+1 at all. So in short I'd like to setup the base machine (which will be running Linux) and then test the underlying SW RAID for speed. What kind of tool exists to simulate this kind of load? Barring the lack of a specific tool, how about a generic FS testing tool that will simulate different loads?

  Read the article

• Is it the address bus size or the data bus size that determines "8-bit , 16-bit ,32-bit ,64-bit " systems?

  - by learner

  My simple understanding is as follows. Memory (RAM) is composed of bits, groups of 8 which form bytes, each of which can be addressed ,and hence byte addressable memory. Address Bus stores the location of a byte of memory. If an address bus is of size 32 bits, that means it can hold upto 232 numbers and it hence can refer upto 232 bytes of memory = 4GB of memory and any memory greater than that is useless. Data bus is used to send the value to be written to/read off the memory. If I have a data bus of size 32 bits, it means a maximum of 4 bytes can be written to/read off the memory at a time. I find no relation between this size and the maximum memory size possible. But I read here that: Even though most systems are byte-addressable, it makes sense for the processor to move as much data around as possible. This is done by the data bus, and the size of the data bus is where the names 8-bit system, 16-bit system, 32-bit system, 64-bit system, etc.. come from. When the data bus is 8 bits wide, it can transfer 8 bits in a single memory operation. When the data bus is 32 bits wide (as is most common at the time of writing), at most, 32 bits can be moved in a single memory operation. This says that the size of the data bus is what gives an OS the name, 8bit, 16bit and so on. What is wrong with my understanding?

  Read the article

• saslauthd using too much memory

  - by Brian Armstrong

  Woke up today to see my site slow/unresponsive. Pulled up top and it looks like a ton of saslauthd processes have spun up using about 64m of RAM each, causing the machine to enter swap space. I've never seen this many used on there. top - 16:54:13 up 85 days, 11:48, 1 user, load average: 0.32, 0.50, 0.38 Tasks: 143 total, 1 running, 142 sleeping, 0 stopped, 0 zombie Cpu(s): 0.7%us, 0.3%sy, 0.0%ni, 97.3%id, 0.2%wa, 0.0%hi, 0.0%si, 1.4%st Mem: 1048796k total, 1025904k used, 22892k free, 14032k buffers Swap: 2097144k total, 332460k used, 1764684k free, 194348k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 848 admin 20 0 263m 115m 4840 S 0 11.3 5:02.91 ruby 906 admin 20 0 265m 113m 4828 S 0 11.1 5:37.24 ruby 30484 admin 20 0 248m 91m 4256 S 6 9.0 219:02.30 delayed_job 4075 root 20 0 160m 65m 952 S 0 6.4 0:24.22 saslauthd 4080 root 20 0 162m 64m 936 S 0 6.3 0:24.48 saslauthd 4079 root 20 0 162m 64m 936 S 0 6.3 0:24.70 saslauthd 4078 root 20 0 164m 63m 936 S 0 6.2 0:24.66 saslauthd 4077 root 20 0 163m 62m 936 S 0 6.1 0:24.66 saslauthd 3718 mysql 20 0 312m 52m 3588 S 1 5.1 3499:40 mysqld 699 root 20 0 72744 7640 2164 S 0 0.7 0:00.50 ruby 15701 postfix 20 0 106m 5712 4164 S 1 0.5 0:00.50 smtpd 15702 postfix 20 0 52444 3252 2452 S 1 0.3 0:00.06 cleanup 4062 postfix 20 0 41884 3104 1788 S 0 0.3 125:26.01 qmgr 15683 root 20 0 51504 2780 2180 S 0 0.3 0:00.04 sshd 14595 postfix 20 0 52308 2548 2304 S 1 0.2 0:24.60 proxymap 15483 postfix 20 0 43380 2544 1992 S 0 0.2 0:00.38 smtp 15486 postfix 20 0 43380 2544 1992 S 0 0.2 0:00.36 smtp 15488 postfix 20 0 43380 2540 1992 S 0 0.2 0:00.38 smtp 15485 postfix 20 0 43380 2532 1984 S 0 0.2 0:00.36 smtp 15489 postfix 20 0 43380 2532 1984 S 0 0.2 0:00.40 smtp Wasn't sure what Saslauthd is, Google says it handles plantext authentication. The machine has been sending a lot of email through postfix, so this could be related. Anyone know why so many may have spun up? Are they safe to kill? Thanks!

  Read the article

< Previous Page | 397 398 399 400 401 402 403 404 405 406 407 408  | Next Page >