Search Results

Search found 14713 results on 589 pages for 'do release upgrade'.

Page 402/589 | < Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >

• Packet loss with all adapters on one PC only on the LAN

  - by Enigmativity

  I have a Windows 7 64-bit machine that is losing up to 20% of IP packets on both adapters - wireless & LAN. Browser traffic appears to be affected the most, but it is happening to all protocols. All other computers on the network are functioning fine. If I ping from my faulty machine to any machine on the LAN (wired or wirelessly), including the router/gateway and internet sites, I get up to 20% packet loss. If I do the following commands: ipconfig /release ipconfig /renew then I sometimes get my network performance back for a matter of a few seconds to less than a couple of minutes. Rebooting also works for a short period of time. This problem has been occurring for a couple of months and is getting worse. The computer used to work just fine. I updated the wireless adapter firmware the other day with no effect. Does anyone know what is happening?

  Read the article

• Adding a trigger command to autocomplete function in zsh

  - by mkaito

  When you define an alias like alias g=git, the shell will pick it up and run the corresponding autocomplete function. Now, there's a program out there called hub, which is basically a supserset of git, with some added, github-specific functionality. The recommended way to use hub is to alias git=hub. Of course, this won't trigger the autocomplete function for git, which makes sense. Now, if I wanted to have git's autocomplete trigger for hub, the only way I know of is editing /usr/share/zsh/functions/Completion/Unix/_git and adding hub in the first line as trigger. While this works, it isn't practical, since this file will get overwritten with the next zsh release. Assuming hub won't provide a zsh completion function any time soon, is there another way of adding hub to the trigger commands for git's autocomplete function?

  Read the article

• booting FreeBSD 9 from USB stick: boot error

  - by ssc

  I am trying to boot FreeBSD 9 from a USB stick that I created following the official guidelines: dd if=FreeBSD-9.0-RELEASE-i386-memstick.img of=/dev/da0 bs=64k Booting fails with a simple 'boot error'. I have used this USB stick for quite a while for the very purpose of booting / installing new OSs, but I tried a different one anyway - same problem. I have also reproduced the issue on a different machine. I've acquired to image file over torrent which AFAIK has an md5 check built in, but I downloaded it again anyway directly from a FreeBSD mirror. Same result. Does anyone have any success with this ? I did not find anything related online which seems to suggest this is not a well-known problem. Does anyone have a thought where else to search for the cause of the problem ?

  Read the article

• Anyone interested in obtaining a cable list from a visio Diagram? [closed]

  - by Alex

  it's my first post here. Just wondering if anyone had to deal with the following problem - you have to install over say a 100 network elements and servers - cabling is done via contractors, so you need to provide them with an accurate, error-free cable list - your inputs are a set of detailed, port by port, visio diagrams. Prb is to obtain the cable list and get the cabling started while you're busy crafting the switch/routers configs. I coded a Visio plugin, which I plan to release under the GNU license, that returns a cable list from a diagram, and tested it on intermediate size infrastructure, 2K+ cables. It works well. The tool needs a little work to be user friendly, so before getting started, I wanted to know if that was worth the effort. Questions are welcomed, let me know -A PS: the tool is targeted for those who need a port by port description of their network, in the form Source/slot/port/Destination/slot/port.

  Read the article

• How do you manage large web farms?

  - by Andrew Katz

  I have a quickly growing web farm running IIS 7 (30+ servers). All servers are identical copies of each other and all servers are physical. We update the software about once a month, and in the current process, we follow the following steps: Disable server from pool on F5 load balancer. Disable HTTP Keep-alives in IIS so connections drop quickly. Change default directory of website to new folder containing new binaries. Test server Enable HTTP Keep-alives. Enable server in F5 pool. Move to server 2 Microsoft used to have Application Center which was abandoned a while ago. They have made a second attempt with the Web Farm Framework, but this adds as much QA time testing the release package as it saves in the deployment. Has anyone seen a commercial off the shelf application that is tailored for managing and deploying to large web farms? Thanks!

  Read the article

• Disable spell checking in Internet Explorer 10 (Windows 8)

  - by Lumi

  I installed the release preview of Windows 8, which comes with Internet Explorer 10. IE10 has been endowed with a spell checking Feature, which is active while I write this text. As a matter of principle, I disable spell checking anywhere I go. I simply hate spell checking. I know better than the spell checker. (And when not it doesn't matter.) This is all the more annoying as I write in several languages and the spell checker only does one language (German, in this case), and then even in the new and wrong spelling, not in the old an true one. How can I disable this?

  Read the article

• Change popup format for Kopete in Gnome (Ubuntu 10.04)

  - by HorusKol

  After trialling Empathy which was included with Gnome/Ubuntu 10.04 I decided to go back to Kopete since I was losing chat messages. However, for some reason, Kopete is now displaying all popups in a big, ugly window with four options (ok, cancel, view, ignore, or something like that) that actually all seem to do nothing. I tried looking for options in Kopete to change the popup style to the nicer Gnome style one which goes up in the top-right of my desktop, but it doesn't seem to be possible with this release. So I had to resort to removing all popup messages from Kopete to prevent my screen being taking over by a popup requiring action for every incoming chat message. Unfortunately, this now means that I do not get any notifications when people message me - and so I can go a couple of hours without realising that they did. Anyone know how to get the nice, unobtrusive popups working in this version?

  Read the article

• Issues connecting to WPA2 with User Authentication Mavericks?

  - by heinst

  I was on all the builds of the Mavericks beta and connecting to my University's network was fine. Then I upgraded to the public release and now I can't seem to connect to the internet. I can connect to other networks, but not my schools. Its a WPA2 network with a User Authentication. And my MacBook is a 2011? 2.2 GHz first gen i7 Quad Core with 8 GBs of RAM. Does anyone else have the same issue? Any tips on how to fix it? Thanks! heinst

  Read the article

• How to install latest version of imagick on centos 5.8 64bit using bash

  - by user57221

  How can I download and install latest version of imagick on centos 5.8 64bit using bash for php 5.4. >yum info php Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirror.ellogroup.com * epel: mirror01.th.ifl.net * extras: mirror.ellogroup.com * updates: mirror.ellogroup.com Installed Packages Name : php Arch : x86_64 Version : 5.4.3 Release : 1.el5.remi Size : 8.8 M Repo : installed Summary : The PHP HTML-embedded scripting language. (PHP: Hypertext Preprocessor) URL : http://www.php.net/ License : PHP Description: PHP is an HTML-embedded scripting language. PHP attempts to make it : easy for developers to write dynamically generated webpages. PHP also : offers built-in database integration for several commercial and : non-commercial database management systems, so writing a : database-enabled webpage with PHP is fairly simple. The most common : use of PHP coding is probably as a replacement for CGI scripts. : : The php package contains the module which adds support for the PHP : language to Apache HTTP Server.

  Read the article

• Change popup format for Kopete in Gnome (Ubuntu 10.04)

  - by HorusKol

  After trialling Empathy which was included with Gnome/Ubuntu 10.04 I decided to go back to Kopete since I was losing chat messages. However, for some reason, Kopete is now displaying all popups in a big, ugly window with four options (ok, cancel, view, ignore, or something like that) that actually all seem to do nothing. I tried looking for options in Kopete to change the popup style to the nicer Gnome style one which goes up in the top-right of my desktop, but it doesn't seem to be possible with this release. So I had to resort to removing all popup messages from Kopete to prevent my screen being taking over by a popup requiring action for every incoming chat message. Unfortunately, this now means that I do not get any notifications when people message me - and so I can go a couple of hours without realising that they did. Anyone know how to get the nice, unobtrusive popups working in this version?

  Read the article

• Error while setting up Anywhere Access on Windows Server 2012 Essential (personalized domain name from Microsoft)

  - by Thomas

  I am trying to setup Anywhere Access on a Windows Server 2012 Essential Release Candidate, but keep getting this error: "The domain name was not setup for your server. Wait a few minutes and run the wizard again. An unknown error occurred. Please wait a few minutes and then try again". These are the options that I selected in the Wizard: I want to set up a new domain name Get a personalized domain name from Microsoft Entered my Windows live id and password xxxx.remotewebaccess.com And on the next page the error is displayed. I have setup my router (Linksys WRT160N) to forward all TCP traffic to the Server. UPnP is also enabled. If I hit my public (dynamic) IP (http://188.182.194.182/) I get the Windows Server 2012 homepage. Any ideas?

  Read the article

• Renting an "EC2" server VS buying one (for a start up in initial stages)

  - by krish p

  We are a small start up in the early stages and are working on a SaaS-based Rails product. Currently, we use EC2 for a small instance and have a need for another large/extra-large instance as we are beginning to deploy to the Cloud and get ready to release our "alpha" version. While EC2 was my choice for numerous reasons (reliability, accessibility - small team is geographically dispersed, maintainability, and things of that nature), it appears to be rather expensive. While the product will ultimately be deployed in the Cloud (be it EC2 or otherwise) and that experience would help the development team, would it make sense to purchase a physical server and stick it in the basement or bite the bullet and pay the price for EC2 (or other Cloud Providers)? While such decisions are driven by numerous factors, it would certainly help to get the thoughts of other folks who may have been in similar situations. Hence, the post. Thanks much!

  Read the article

• Bad sound quality of 3.5mm headphone with mic on laptop

  - by Isaac

  I have a set of headphones that have a built-in mic for hands-free calling. They just work great on my Sony Ericsson Cedar cellphone. The problem is that when I connect headphone to my Dell N5010 laptop to listen to music, the quality is horrible, with very weak or no vocals. They funny part is when I hold down the talk button on the mic (headphone mic), at which point it sounds great, but goes back to bad quality as soon as I release talk button. Also, when I take out the jack a little, at some point, the sound is great but I have to hold the jack there. I looked for any configuration on the sound card driver but find nothing. Besides using a glue to hold down the talk button of mic :), is there any other solution?

  Read the article

• How to install java-1.7.0-openjdk-devel on RHEL Server 6.3?

  - by andand

  I have need of installing a Java 7 development environment on a RHEL 6.3 (system details are below). Following the official OpenJDK directions I tried yum install java-1.7.0-openjdk-devel (as root). This yields the error message: No package java-1.7.0-openjdk-devel available. The Java6 JDK java-1.6.0-openjdk-devel and the Java7 JRE java-1.7.0-openjdk are both available, but the Java7 JDK does not appear. Is there a non-default repository from which I can install this? If so what is it? Distribution: Red Hat Enterprise Linux Server release 6.3 (Santiago) Kernel: 2.6.32-279.5.2.el6.x86_64

  Read the article

• Redirecting to Login page in apache

  - by Shailesh Sutar

  I am working on OTRS where i want to set OTRS Login page on otrs.mydomain.com. I am having machine CentOS release 6.2 (Final). Currently I am accessing it,using otrs.mydomain.com/otrs/customer.pl for customer login AND otrs.mydomain.com/otrs/index.pl for admin login. I changed DocumentRoot to /opt/otrs but its not working as it should. OTRS is installed in /opt/otrs/ I am using Apache Server version: Apache/2.2.15 (Unix). Now i am stuck.

  Read the article

• Hyperic HQ says the server is down, but it is not!

  - by Diego Jancic

  Hi, I've been using HQ for a couple months now, and everything worked fine. But since yesterday all resources go down for a couple hours, and then everything restores to normal, and then go down again without doing anything. The server of course is working, the HQ server and agent are both working, and the IPs were not modified. I've tried to re-run the setup in the HQ agent, and it did not change anything. Agent is in Windows 2008, and Server is in Windows 2003. I'm using HQ Version 4.1.2 (build #1053 - May 06, 2009 - Release Build) Any hint? Thanks! Update: I guess (although I'm not sure) it stopped working when the disk on the server went full, with 0 bytes of free space. Of course I've freed more than 15gbs and restarted the HQ server/database.

  Read the article

• Install latest kernel to Ubuntu and have grub acknowledge the new installed kernel

  - by Phuong Nguyen

  I have an installed Ubuntu Distro (Karmic 9.10) already. However, due to some problems with xorg ati driver, I cannot standby my computer. Some guy have suggested me to try the latest version of xorg driver which in turn requires a newer version of Linux kernel than the newest release available from Ubuntu Central Repository (2.6.33). I have searched though several articles on how to install a custom Linux kernel. However, these articles are so 2004/2005 and they were talking about lilo (???). Since then, I'm afraid that I cannot make the Grub Boot recognize the new Linux kernel properly (I'm just a newbie to Linux). I would love to know how to install the kernel into Ubuntu and have grub acknowledge the new installed kernel.

  Read the article

• Checkout repo from SVN but use local files to populate

  - by aidan

  I have an SVN server on our development server, and I release to our production server using rsync. It not ideal, but it's worked so far. Anyway, I've finally got the SVN client installed on the production server and I want to start using that to copy files from development to production. My problem is this, I don't want to check all the data out of development when I already have it on the production server. Is there a way to "checkout" a repository, but use the files that are already on the production server (and force it to assume they are the head versions for example)? Thanks.

  Read the article

• Modern open source NIDS/HIDS and consoles?

  - by MattC

  Years back we set up an IDS solution by placing a tap in front of our exterior firewall, piping all the traffic on our DS1 through an IDS box and then sending the results off to a logging server running ACiD. This was around 2005-ish. I've been asked to revamp the solution and expand on it and looking around, I see that the last release of ACiD was from 2003 and I can't seem to find anything else that seems even remotely up-to-date. While these things may be feature complete, I worry about library conflicts, etc. Can anyone give me suggestions for a Linux/OpenBSD based solution using somewhat modern tools? Just to be clear, I know that Snort is still actively developed. I guess I'm more in the market for a modern open-source web console to consolidate the data. Of course if people have great experiences with IDS' other than Snort I'm happy to hear about it.

  Read the article

• What features do you want to see in Windows Server?

  - by Ben Herila

  I work for the Windows Server planning and management team at Microsoft. While I can't share any of our current plans right now, I am interested in seeing what features people would like to see in the next release of Windows Server. Please post your ideas as separate answers, and vote for the ones you want to see. If there is an overwhelming response to an idea or two, I'll personally see what I can do to get the feature included. I know this question is subjective, but I do believe this thread has relevance to the community. Looking forward to hearing from you!

  Read the article

• Installing Office 2010 through group policy without an msi

  - by Ri Caragol

  I have been breaking my head for several days now trying to install Microsoft office 2010 through group policy. Unfortunately Microsoft decided it would be fun to release office without an MSI and so I either Need to create an msi for it or Need to install it through a logon script that would run the setup.exe from a network location. Any advise would be greatlly appreciated. I tried to create a script but even though I double click it and it runs properly, it does not seem to kick in when users log in or when the machine is turned on. Also is there an easy way to create an msi?

  Read the article

• Getting error while running apt-get update

  - by pradeepchhetri

  I am getting the following error while running apt-get update on all of the servers. W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used. Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 8B48AA6247928553 W: Some index files failed to download, they have been ignored, or old ones used instead. The solutions available are: To login into each of the server and run the following command to import the gpg key for that repo. sudo gpg --keyserver hkp://subkeys.pgp.net --recv-keys 8B48AA6247928553 sudo gpg --export --armor 8B48AA6247928553 | sudo apt-key add - But this requires logging into all of the individual servers and run the above two commands. I am looking for a way to correct by working on apt-repo server. Is there any way to do that.

  Read the article

• How to force Windows 7 to ask for a "fresh" IP address from DHCP server?

  - by haimg

  I'm troubleshooting a certain issue with my DHCP configuration, and need my Windows machine to ask for a "fresh" IP address, so I can see which address DHCP server gives by default. When I do ipconfig /release followed by ipconfig /renew, Windows "proposes" its old IP address to the DHCP server (just checked with Wireshark, initial "DHCP Discover" message has Option-50 (requested IP address) with Windows machine's old IP). Tried disabling/enabling network adapter. Same behavior. Question: How can I force Windows to just ask for a new IP address, without proposing its old IP address.

  Read the article

• How can I find a laptop if it has a different model name all over the world?

  - by Mike

  CONUNDRUM: A laptop review in the UK talks about how brilliant the "ASUS ABCDE 55" is, but in America, France, etc there is no such laptop name. In fact it's called "ASUS 12345 AB" - AAARRGH! QUESTION: Is there a way of finding out all the diverse names for the same laptop all over the world? Example: if Samsung create a R2D2500, then what is that spec laptop called in all the other countries (if they release it of course). Or if it's not released, what is their similar spec laptop called in the other countries? I understand that specs may be different, but if I read a review on my trusted UK website, but live in say Australia, I want to be able to find the name of the same laptop in Australia and then check out local places to buy it. So if anyone knows if there is a technique, specific website, or even how to use a company website to find out these annoying name changes I'd really appreciate it.

  Read the article

• tcpview cannot kill connection/process

  - by Stig

  I have a program that sometime misses to close a tcp connection. After the program has ended I can see that the port is taken. TCPViewer shows "non-existent" in the "Process" column. If i try to "End process" or "Close connection" nothing happens. If i reboot the server the port is released. But how can I tell Windows to release this port without a reboot? SOLUTION: It was dw20.exe (Microsoft Error Reporting) that was holding it back.

  Read the article

< Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >