Search Results

Search found 29064 results on 1163 pages for 'network management'.

Page 402/1163 | < Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >

• Why does my DSL modem now need a reboot each time for my laptop to connect?

  - by msorens

  I have a rather peculiar home networking issue. For sometime my home network was purring along fine. I could turn on either of my laptops and they would quickly find and connect to my DSL modem (and thence the internet). Several days ago I unplugged my DSL modem for the first time in months. Upon turning it back on and waiting for the boot to finish, the lights on the panel indicated the DSL modem was fully operational, just as before. But that's not what happened. Not at all. Now when I turn on my Win7 laptop, the network icon in my system tray shows a small starburst; hovering over it the tooltip states "Not connected; connections are available". Clicking it lists several nearby networks including my own network showing a strong signal. If I click to connect, it attempts a connection but then I get a dialog stating "Windows was unable to connect to MyNet.". Turning off wireless on my laptop and turning it back on yields no difference. Running the network troubleshooter (which includes doing a repair on the network connection) yields no difference. The only remedy is to reboot the DSL modem (i.e. unplug it, wait a few seconds, then plug it back in). As soon as it goes online my laptop finds it and connects properly. To add one more twist to the story, this happened to me once before, several months ago. After a couple weeks, the situation resolved itself(!). Everything started working properly again, due to nothing I did. Final note: this problem only affects the wireless connection to the DSL modem. My desktop computer, connected via hardline to the DSL modem, connects fine when I turn it on. Any thoughts on why this is happening or how to fix it?

  Read the article

• Can I get a domain controller not to act as DNS for the members?

  - by rsw

  Hi, Let me try to explain my current setup. I have one linux machine acting as DHCP and DNS (dhcpd3 and bind) in my network. This works fine, all computers I hook up to the network gets an IP address and proper DNS servers set. Let's call it 10.12.0.10 However, we also have a Windows Server 2003 Domain Controller in our network to which we add our Windows computers (running XP), let's call it 10.12.0.20. I noticed that when I run 'nslookup' on one of the windows machines, it says that the primary DNS is 10.12.0.20. This have not been much of a problem since: The Windows clients are stationary The Windows server in itself point out my real DHCP/DNS, since I can reach everything specified in it However, this turns out to be a problem when we use Laptops. They connect to the domain here and gets a DNS server, but when the user travels or connect the computer from home, we hit a problem. They are connected to their internet, but their DNS is 10.12.0.20 which they can't reach since they're at home and not at the office network. I solved this by removing the register key called "NameServer" with the value 10.12.0.20, but it gets set again whenever they logon to the domain the next time (when they get back to the office). Can I somehow make the computers take whatever DNS server they are handed when connecting to the internet or a home network, instead of always trying to reach the Domain Controller?

  Read the article

• Oracle Manageability Presentations at Collaborate 2012

  - by Get_Specialized!

  Attending the Collaborate 2012 event, April 22-26th in Las Vegas, and interested in learning more about becoming specialized on Oracle Manageability? Be sure and checkout these sessions below presented by subject matter experts while your onsite. Set up a meeting or be one of the first Oracle Partners onsite to ask me, and we'll request one of the limited FREE Oracle Enterprise Manager 12c partner certification exam vouchers for you. Can't travel this year? the  COLLABORATE 12 Plug Into Vegas may be another option for you to attend from your own desk presentations like session #489 Oracle Enterprise Manager 12c: What's Changed? What's New? presented by Oracle Specialized Partners like ROLTA   Session ID Title Presented by Day/Time 920 Enterprise Manager 12c Cloud Control: New Features and Best Practices Dell Sun 9536 Release 12 Apps DBA 101 Justadba, LLC Mon 932 Monitoring Exadata with Cloud Control Oracle Mon 397 OEM Cloud Control Hands On Performance Tuning Mon 118 Oracle BI Sys Mgmt Best Practices & New Features Rittman Mead Consulting Mon 548 High Availability Boot Camp: RAC Design, Install, Manage Database Administration, Inc Mon 926 The Only Complete Cloud Management Solution -- Oracle Enterprise Manager Oracle Mon 328 Virtualization Boot Camp Dell Mon 292 Upgrading to Oracle Enterprise Manager 12c - Best Practices Southern Utah University Mon 793 Exadata 101 - What You Need to Know Rolta Tues 431 & 1431 Extreme Database Administration: New Features for Expert DBAs Oracle Tue Wed 521 What's New for Oracle WebLogic Management: Capabilities that Scripting Cannot Provide Oracle Thu 338 Oracle Real Application Testing: A look under the hood PayPal Tue 9398 Reduce TCO Using Oracle Application Management Suite for Oracle E-Business Suite Oracle Tue 312 Configuring and Managing a Private Cloud with Oracle Enterprise Manager 12c Dell Tue 866 Making OEM Sing and Dance with EMCLI Portland General Electric Tue 533 Oracle Exadata Monitoring: Engineered Systems Management with Oracle Enterprise Manager Oracle Wed 100600 Optimizing EnterpriseOne System Administration Oracle Wed 9565 Optimizing EBS on Exadata Centroid Systems Wed 550 Database-as-a-Service: Enterprise Cloud in Three Simple Steps Oracle Wed 434 Managing Oracle: Expert Panel on Techniques and Best Practices Oracle Partners: Dell, Keste, ROLTA, Pythian Wed 9760 Cloud Computing Directions: Understanding Oracle's Cloud AT&T Wed 817 Right Cloud: Use Oracle Technologies to Avoid False Cloud Visual Integrator Consulting Wed 163 Forgetting something? Standardize your database monitoring environment with Enterprise Manager 11g Johnson Controls Wed 489 Oracle Enterprise Manager 12c: What's Changed? What's New? ROLTA Thu    

  Read the article

• Networking 2 Virtual PC with one VPC as DHCP server

  - by vivek

  My host OS is Win XP Professional. The host has a real network connection via DSL and I created a second network connection using Microsoft Loopback Adapter. Internet connection sharing is enabled. The Microsoft Loopback adapter has a IP address of 192.168.0.1. I have 1 Virtual PC which has Windows Server 2003. I have setup the network connection on this VPC to use Microsoft Loopback Adapter. I setup this VPC to be the Domain Controller , DNS Server and DHCP Server. I set this to a static IP address 192.168.0.2 (on the same subnet as the MS Loopback adapter) I have a second Virtual PC which also has Windows Server 2003. The network connection on this VPC is set to "Local Only". I want this VPC to get its IP address from the 1st VPC on which I setup as a DHCP server. What i want is the 2 VPC should be in a network with one of the VPC acting as the domain controller, DNS Server and DHCP server. The second VPC shoud get its IP address from the 1st VPC. It should be a part of the domain of the 1st VPC. When i tried to make the second VPC get the IP address from the first VPC I am not succeeding. Can somebody post some suggestions on how to go about this ?

  Read the article

• How to install the Printer

  - by Maroof

  While I was installing the printer via the network , the Network Setting is deleted from the printer. Now I don't know how to reset the printer or how to bring back the network seting.

  Read the article

• WEBCAST: Strategies for Managing the Oracle Database Lifecycle

  - by Scott McNeil

  Thursday November 110:00 a.m. PST / 1:00 p.m. EST Join us for a live Webcast and see how Oracle Enterprise Manager 12c makes database lifecycle management easier. You’ll learn how to: Simplify database configurations thanks to extensive automation for discovery and change detection Improve IT service levels with Oracle’s next-generation database patching and provisioning automation Ensure consistency and compliance with comprehensive database change management Register today. Stay Connected: Twitter | Facebook | YouTube | Linkedin | NewsletterDownload the Oracle Enterprise Manager Cloud Control12c Mobile app

  Read the article

• Oracle: Acquisition of Demantra

  Jon Chorley, Vice President, Product Strategy, talks to Cliff about the acquisition of Demantra and Demantra's industry leading solutions for Demand Management, Trade Promotion Management and Sales, and Operations Planning, and how this fits in to Oracle's overall strategy for Supply Chain applications.

  Read the article

• Debugging Windows PC freeze

  - by Violet Giraffe

  I have a problem with my computer, would appreciate any hints/ideas. It usually begins not immediately after booting Windows, but at some unpredictable point in time, which doesn't seem to correlate with any specific actions of mine. First sign of a problem is process System starting to consume 25% CPU time steadily. I have a quad-core CPU, so it might be one thread working non-stop. At this point micro-freezes start to occur - screen stops refreshing, but if I have, say, music player running - it continues playing. If I try to do something between the freezes, like open Start menu, it will freeze completely and forever. If I press reset button the PC will shut down and then start cold, as opposed to usual reset behavior (which doesn't include PC shutting down). I have noticed that full restart upon reset is usual for hardware problems, but I think this problem isn't related to at least motherboard-CPU-RAM-videoadapter. It certainly isn't caused by overheating. One very important not is that it seems to be related to Windows hosted WLAN network: I have USB Wi-Fi dongle and have configured a hosted network to share cable Internet connection with Wi-Fi devices. I am not 100% certain there's a strong connection, but in 9 or 10 cases when I enabled the network (by executing netsh wlan start hostednetwork), it did freeze eventually (sometimes within minutes of starting the network, sometimes within hours), and on at least 10 days when I didn't start the network it never froze, no matter how I used the computer). There are no critical/error entries in the events log that I can suspect as being related, only regular stuff like "driver not loaded". I have found no critical/error events that are being logged around the time of freeze occurring and are not logged during normal boot without starting the WLAN.

  Read the article

• Wireless connection drops when wired computer starts a game.

  - by Skadlig

  Starting this week I have had a strange problem on my network. Some background of my setup: Internet is provided by a adsl-modem. A D-link Dir-600 router is hooked up to to adsl-modem. My computer is hooked up to the router using a cat-5 cable. My wife's computer is hooked up using a wireless usb dongle, TP-Link TL-WN821N. Both computers use windows 7 64-bit home premium. Up until this week everything was normal, we could for instance play Dungeons & Dragons Online together without any network issues. Now every time I start DDO or any other network game, for instance L4D, the whole wireless network drops. I have confirmed that it's not just her computer using an Samsung Galaxy Spica android phone. Shutting down the game on my end restores the wireless connection automagicly. My wife can start DDO without the net dropping but if I plug in a wireless network card in my computer and start up the game the connection drops. So it seems like something my computer, and my computer only, does when starting a game makes the wireless connection write a sad note and kill it self but for the life of me I can't figure out what that might be. I could hook her computer up using cat-5 but I would prefer not to do that. Does anyone have any suggestions as to what the problem might be, what I can do to fix it or what I should do to get more data regarding what is happening?

  Read the article

• Dell inspiron not finding Vodafone router

  - by Jeggy

  I have a "Dell inspiron 1564" and ubuntu doesn't find my friends router it works great at home, he has a vodafone router jeggy@jeggy-XPS:~$ sudo lshw -C network *-network description: Wireless interface product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: 78:e4:00:2a:d1:eb width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11bg resources: irq:17 memory:f0200000-f0203fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 02 serial: b8:ac:6f:67:32:52 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=N/A latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:3000(size=256) memory:f0410000-f0410fff memory:f0400000-f040ffff memory:f0420000-f043ffff *-network description: Ethernet interface physical id: 4 logical name: ham0 serial: 7a:79:05:ff:3e:ec size: 10Mbit/s capabilities: ethernet physical configuration: autonegotiation=off broadcast=yes driver=tun driverversion=1.6 duplex=full firmware=N/A ip=5.255.62.236 link=yes multicast=yes port=twisted pair speed=10Mbit/s

  Read the article

• Success with E-Business Suite Release 12 Implementations: Intelligroup, Inc.

  Want to learn more about implementing Oracle E-Business Suite Release 12? Listen to this Srinivas Krishna, Sr. Intelligroup is a global provider of outsourcing services including application management and support services, infrastructure management services, innovative consulting, technology, and implementation services. Learn more at: http://www.intelligroup.com/Direction – Oracle Practice, Intelligroup, Inc discuss customer experiences and benefits from Release 12 implementations.

  Read the article

• Focus On PeopleSoft at Oracle Open World

  - by John Webb

  With over 170 PeopleSoft content sessions at this year's Open World, you can use the following links to make the most of your conference experience: · Focus on PeopleSoft Applications Technology (PeopleTools) · Focus on PeopleSoft Financials · Focus On PeopleSoft Human Capital Management (HCM) · Focus on PeopleSoft Procurement and Supply Chain Management (SCM) · Focus on PeopleSoft Projects (ESA) For all Oracle products use this link: http://www.oracle.com/openworld/focus-on/index.html

  Read the article

• How do I troubleshoot an IPsec tunnel (from a cellular router to a public server)?

  - by Hanno Fietz

  I'm new to IPsec and struggling with a setup that might soon be widely used in our operations (provided I do understand it, eventually...). A cellular router (blackbox by netModule, from its log messages it seems to be running Linux and OpenSwan) connects a sensor network on customers' sites with our public server. We need to be able to connect into the local network, so I had the cell provider give me a public IP (a dynamic one). The way their setup works, the public IPs only allow IPsec traffic. I set up OpenSwan on our Ubuntu server (running Jaunty). This is my connection config from /etc/ipsec.conf: conn gprs-field-devices left=my.pub.lic.ip [email protected] #leftsubnet=192.168.1.129/25 right=%any [email protected] #rightsubnet=192.168.1.1/25 #rightnexthop=%defaultroute auto=add On the router, all I have is the Web UI, in which I made the following settings: "Remote endpoint": public IP of server, same as "left" above "Local Network Address": 192.168.1.1 "Local Network Mask": 255.255.255.128 "Remote Network Address": 192.168.1.129 "Remote Network Mask": 255.255.255.128 The pluto process on the server is listening for connections on port 500. It can't open a tunnel, obviously, because it doesn't know at which IP the client is. I set up a passphrase as PSK for @field.econemon.com in /etc/ipsec.secrets and also configured it in the router (which doesn't seem to support certificates). My problem is, nothing happens. The router just says, IPsec is "down". When I copy-paste the IP into ipsec.conf (for "right="), and ask the server to ipsec auto --up gprs-field-devices, it just hangs until I press Ctrl-C. Is there anything wrong with my setup? How can I debug this further? My router gives the following loglines that seem related, but don't tell me anything: Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.d/hostkey.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.d/netbox0.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: "netbox00" #1: initiating Main Mode Feb 21 23:08:20 Netbox daemon.err ipsec__plutorun: 104 "netbox00" #1: STATE_MAIN_I1: initiate Feb 21 23:08:20 Netbox daemon.err ipsec__plutorun: ...could not start conn "netbox00" Feb 21 23:08:22 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: ignoring informational payload, type NO_PROPOSAL_CHOSEN Feb 21 23:08:22 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: received and ignored informational message Feb 21 23:08:28 Netbox user.warn parrot.system_controller[762]: IPSECCTRLR: Tunnel 0 is down for 0 seconds Feb 21 23:08:40 Netbox user.warn parrot.system_controller[762]: IPSECCTRLR: Tunnel 0 is down for 10 seconds Feb 21 23:08:52 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: ignoring informational payload, type NO_PROPOSAL_CHOSEN

  Read the article

• Connecting to wireless networks from command line

  - by Balaji

  I need to write a shell script which connects to one of the two available wi-fi connections. One is a un secure connection and the other is secure connection. My question has 2 parts- 1.How to connect to the un-secure (un-encrypted and no password required) connection from command line (or by executing a shell script) when I'm connected to the secure connection? I followed the steps in http://www.ubuntugeek.com/how-to-troubleshoot-wireless-network-connection-in-ubuntu.html for in-secure connection. I put all the commands in a script and executed it (I made sure that interface name and essid are correct) - sudo dhclient -r wlan0 - sudo ifconfig wlan0 up - sudo iwconfig wlan0 essid "UAPublic" - sudo iwconfig wlan0 mode Managed - sudo dhclient wlan0 But nothing happens - I'm not disconnected from the current network and connected to the new one 2.When I want to connect to the secure wi-fi network, I understand from http://askubuntu.com/a/138476/70665 that I need to use wpa_supplicant. But I enter a lot of details in the interface when I connect via UI security : wpa and wpa2 enterprise Authentication : PEAP CA certificate : Equifax... PEAP version : automatic inner authentication : MSCHAPv2 username : password : How to use wpa_supplicant to mention all these details in the command line? The conf file network={ ssid="ssid_name" psk="password" } doesn't work for me.

  Read the article

• How can I turn my server box into an internet modem?

  - by Robbie Mckennie

  I've been trying to learn about networking, network maintenance, network administration, stuff of that nature (I want to be a network engineer when I get out of university after I get out of high school) and I want to set up my older PC (running Slackware) as a modem, as a project to help me learn. I want to know what kind of hardware I'll need. Pretty much all I know is that my current modem uses ADSL2+ and PPPoA, which I think is a software thing anyway. How can I accomplish this?

  Read the article

• Wireless router not connection -> AP Not associated

  - by candido

  I can not connect to internet by wireless router after some months with ubuntu 10.04. I can connect with the same portable but with win OS. My SO is ubuntu 10.04 linux 2.6.32-41 arch SMP i686. The internet wireless network controller is Atheros AR9285 chipset (pci express) Kernel module ath9k I have tried a command line connection: $ sudo /etc/init.d/network-manager stop #stop gui network manager $ iwconfig wlan0 essid WLAN_3C key s:C001D20550B3C $ ifconfig Access Point: NOT-ASSOCIATED $dmesg ... AP 00:1a:2b:08:60:49 associated Is the SO has connected to router for booting long ( associated message), after boot and login why the connection to router is not possible by network-manager or command line (NOT associated message)? Thanks in advance

  Read the article

• Database Security: The First Step in Pre-Emptive Data Leak Prevention

  - by roxana.bradescu

  With WikiLeaks raising awareness around information leaks and the harm they can cause, many organization are taking stock of their own information leak protection (ILP) strategies in 2011. A report by IDC on data leak prevention stated: Increasing database security is one of the most efficient and cost-effective measures an organization can take to prevent data leaks. By utilizing the data protection, access control, account management, encryption, log management, and other security controls inherent in the database management system, entities can institute first-level control over the widest range of protected information. As a central repository for unstructured data, which is growing at leaps and bounds, the database should be the first layer providing information leakage protection. Unfortunately, most organizations are not taking sufficient steps to protect their databases according to a survey of the Independent Oracle User Group. For example, any operating system administrator or database administrator can access the all the data stored in the database in most organizations. Without any kind of auditing or monitoring. And it's not just administrators, database users can typically access the database with ad-hoc query tools from their desktop and by-pass any application level controls. Despite numerous regulations calling for controls to limit the powers of insiders, most organizations still put too many privileges in the hands of their employees. Time and time again these excess privileges have backfired. Internal agents were implicated in almost half of data breaches according to the Verizon Data Breach Investigations Report and the rate is rising. Hackers also took advantage of these excess privileges very successfully using stolen credentials and SQL injection attacks. But back to the insiders. Who are these insiders and why do they do it? In 2002, the U.S. Secret Service (USSS) behavioral psychologists and CERT information security experts formed the Insider Threat Study team to examine insider threat cases that occurred in US critical infrastructure sectors, and examined them from both a technical and a behavioral perspective. A series of fascinating reports has been published as a result of this work. You can learn more by watching the ISSA Insider Threat Web Conference. So as your organization starts to look at data leak prevention over the coming year, start off by protecting your data at the source - your databases. IDC went on to say: Any enterprise looking to improve its competitiveness, regulatory compliance, and overall data security should consider Oracle's offerings, not only because of their database management capabilities but also because they provide tools that are the first layer of information leak prevention. Learn more about Oracle Database Security solutions and get the whitepapers, demos, tutorials, and more that you need to protect data privacy from internal and external threats.

  Read the article

• Windows XP does not list WPA wireless networks

  - by Tomalak

  What can be the reason that Windows XP does not show WPA-encrypted wireless networks? The laptop I have problems with is an older model (Toshiba Satellite Pro 6100) with Windows XP SP3 on it, fresh install. The wireless network card in it is an Agere product that lists as "Toshiba Wireless LAN Mini PCI Card". The networks showed up perfectly before I first tried to connect to one (it was set to WPA2). The connection failed (the card supports WPA only), then something must have happend and Windows hides these networks now. A manually configured WPA setup via Windows' own wizard works, I'm using it right now. The network just won't show up in the list of available network on its own. I suspect that XP incorrectly set a flag somewhere that this network card does not support WPA. Is there such a flag, and if so, how can I change it back?

  Read the article

• EJIE usage of Oracle WebLogic Server and Oracle Coherence

  - by rob.misek

  Watch Mike Lehmann, Senior Director of Product Management from Oracle and Oscar Guadilla, Senior Architect from EJIE, Basque Government's IT Company, discuss EJIE's implementation of Oracle WebLogic Server and Oracle Coherence. Hear EJIE's history with Oracle WebLogic Server, how and why they are using it for its web application platform, common services, file services, and intranet and the benefits they are gleaning. In addition, hear how EJIE is using WebLogic JMS for document management common service integration in its Eco-government project. Watch from the beginning or jump to the details of their Coherence usage (10:15)

  Read the article

• Networking: Adding specific route for printer, on Mac Connected to Two Networks

  - by Jordan

  I have a Mac connected to two different networks (wireless en1 and ethernet en0 ). The ethernet network is the preferred (System Preferences-Set Service Order). I'd like to be able to print to a printer on the wireless network side, without having to go to System Preferences and make the wireless network come first in the service order. Is there a way to add a route for a specific printer?

  Read the article

• Recommendations for a JetDirect print server for USB 2.0 printers?

  - by eleven81

  I have been using some older HP JetDirect 300x print servers for a variety of parallel printers over the years. These things work great for every printer I have tried them with, including HP's, Dell's, and even a Mountbatten braille embosser! These have been a boon for printers whose internal network cards fail, but whose parallel ports continue working. I don't have to throw away the $500 printer that is one year and a week old, and can keep using it for many, many years. Now that very few printers are coming with parallel ports, but are coming solely with USB connections and network cards. When the network card fails but the printer is still usable, I want to continue using it on the network with a JetDirect card. In summary: Does anyone have any recommendations for JetDirect cards that will work as well with USB 2.0 printers of unspecified manufacturer that my old JetDirect 300x cards do?

  Read the article

• DNS configuration for external/internal resolution

  - by FerranB

  HI, We have an internal web server which is available through Internet and from local network. The server is located in the local network. The current configuration is the following: To access through Internet you use http://webexample.com To access through Local Network you use http://myweb The main problem is that the local users cannot share links with external users. Thats a problem for us. I want to setup the following configuration: All users (local and Internet) access through http://webexample.com The local DNS server resolves http://webexample.com to the local Network IP (i.e 192.168.2.100) Any other suggestion? Which is the best way to override http://webexample.com resolution in Windows Server? It can be done on DNS server or it have to be done in hosts file?

  Read the article

• faking NAT with a VMware distributed switch across multiple hosts

  - by romant

  I need to construct a NAT for certain machines within the network. Wish to do this with dvSwitch - as it seems the logical way of attacking the problem as in this scenario there's just under 30 hosts. In order for the NAT'ed VM's to have access to the 'real' network. I am providing a 'router' VM, which will have access to the WAN/outside network, and also act as the DHCP server for the NAT'ed machines. Problem Space When the machines connected to the NAT interface and the router are on the same host, then they get an IP from the router VM, and work perfectly (routed outside). Unfortunately machines on other Hosts that are connected to the dvSwitch do not get an IP and further tcpdump shows no network data getting through across the hosts within the dvSwitch. Has anyone achieved a NAT solution using a dvSwitch before that they could share?! Thank you. EDIT: Including the diagram.

  Read the article

• Help with the RT3290 Wireless adapter

  - by Potek

  I know there is a lot of questions about RT3290 wireless adapter, but I read many many of them and noone helped me with my problem. So, I have the HP Pavilion dm1 laptop and I installed Xubuntu 13.10 on it. During the instalation it poped up that I'm able to connect to the internet via network adapter. I did it obviously, but it worked for like 5 seconds, then it said that network connection is down and I couldn't connect to my router, even if i could actually see network connections avaible. Then (when installation ended) I rebooted my computer. My network was avaible! I could connect and browse the internet smoothly. Next day I turned on my laptop and I saw my wireless connection is no longer avaible, so I plugged laptop to the internet via Ethernet cable and started to explore internet searching solution for my problem. I did this: How do I get a Ralink RT3290 wireless card working? And I was able to connect BUT my kernel started to panic every time I started Mozilla or any program that is connecting to the internet. Every tip i searched was almost the same as the link above. I tried to do this many ways. I even Reinstalled Xubuntu to do everything with clear system but the same thing happened. THEN I installed Linux Mint to check whether it is a major or just Xubuntu problem. Linux Mint responded even worse, because I wasn't even able to use terminal (I clearly messed something up). I would really, really appreciate every help, because I do want to solve this problem and finally be able to use Xubuntu/Ubuntu. I'm waiting for advice from anyone patiently. If anyone wants some details, just tell me which ones.

  Read the article

• Once VPN connection is done, how do I proceed reaching the other side address space?

  - by sports

  I'm using Windows Azure and I created a VPN Site To Site, configured like this: My virtual network: My address space: 10.2.0.0/16 (65531) Subnet1: 10.2.1.0/24 (251) Subnet2: 10.2.2.0/24 (251) Gateway: 10.2.3.0/29 (3) My public gateway IP: 137.135.x.z (I wont show x and z for security reasons) This public gateway uses, as you can see, 5 IPs on subnet1 and 5 IPs on subnet2, and 5 IPs on the gateway "Their" virtual network (in azure this would be a "Local network") Their address space: 172.60.100.67/32, 172.60.100.68/32, 172.60.100.69/32 Their device public IP: x.x.x.x (ommited for security reasons) Notice their address space are 3 IPs So: the VPN is "in green" (in Azure is showing up green, literally, like these two are connected) and now my question is: How do I proceed to reach their address space? I've tried creating a virtual machine (Windows Server 2008, but it could be an Ubuntu) on "my" virtual network and it is automatically "placed" on subnet1 or subnet2. So it gets the IP 10.2.1.0 (valid example), I can't choose to place the virtual machine in the gateway address space. How do I "reach" any of the IPs 172.60.100.67, 172.60.100.68, 172.60.100.69 ? In other words: How can I telnet any of these IPs? or ping? or see them in my network? Please provide me answers for Windows Server 2008 or for an Ubuntu. I'm open to create any virtual machine.

  Read the article

< Previous Page | 398 399 400 401 402 403 404 405 406 407 408 409  | Next Page >