Search Results

Search found 51790 results on 2072 pages for 'long running'.

Page 403/2072 | < Previous Page | 399 400 401 402 403 404 405 406 407 408 409 410  | Next Page >

• Combine OS partion with data partition on NAS4Free/FreeNAS

  - by Pak

  I recently built a NAS4Free (formerly FreeNAS) machine using a 256MB (yes, MB) USB drive for the OS. When I did the original install, I had the bright idea of making the OS partition just big enough for the OS and a then creating a second partition using the remainder of the drive to store stuff pertaining to the OS. I never really found a use for the data partition and I ended up running out of space on the OS partition, so now I'd like to combine the partitions into a single partition. Is this something that is possible to do while everything is up and running? If it comes down to it, I can take down the machine and do a fresh install of the OS using the entire space of the USB drive, but I'd like to use this as an opportunity to better familiarize myself with FreeBSD/UNIX type systems. If this is possible, will it interfere with the NAS4Free things? The data partition shows up in the web interface under the disks section. If I end up manually changing the partitions, I'd be concerned with NAS4Free getting confused by the missing partition.

  Read the article

• IIS7.5 is only resolving to the Default Web Site

  - by Dennis Burnham

  I am able to access only the Default Web Site on a Windows 2008 R2 Server which is running IIS 7.5 The Default Web Site's binding is to "All Unassigned", same way as I have done it on a different machine running IIS6 under Windows 2003 Server. The bindings of the desired Web Site have the IP address of the server and the correct home directory. Regardless what I do, the only page content I can see is the default index page in the wwwroot directory which is the Default Web Site. What must I do to deliver the correct content from the Web Sites that are configured in IIS7.5?

  Read the article

• When I auto-start Supervisord on boot, the [program:start_gunicorn] don't start

  - by Charlesliam

  The [program:start_gunicorn] is running with no error when I manually start supervisord with this setup. [program:start_gunicorn] command=/env/nafd/bin/gunicorn_start priority=1 autostart=true autorestart=unexpected user=nafd_it redirect_stderr=true stdout_logfile=/env/nafd/logs/gunicorn_supervisor.log stderr_logfile=/env/nafd/logs/gunicorn_supervisor_err.log I successfully run this init script for my supervisord. But when I used auto-start init script for supervisord the gunicorn is not running. ]# service gunicorn status gunicorn: unrecognized service What do I need to do to make the [program:start_gunicorn] run when using auto-start supervisord on boot? Here's my gunicorn config. /env/nafd/bin/gunicorn_start #!/bin/bash NAME="nafd_proj" DJANGODIR=/env/nafd/nafd_proj SOCKFILE=/env/nafd/run/gunicorn.sock NUM_WORKERS=1 DJANGO_SETTINGS_MODULE=nafd_proj.settings DJANGO_WSGI_MODULE=nafd_proj.wsgi echo "Starting $NAME as 'NAFD Web Server'" source /env/nafd/bin/activate export DJANGO_SETTINGS_MODULE=$DJANGO_SETTINGS_MODULE export PYTHONPATH=$DJANGODIR:$PYTHONPATH RUNDIR=$(dirname $SOCKFILE) test -d $RUNDIR || mkdir -p $RUNDIR cd /env/nafd/nafd_proj exec ../bin/gunicorn ${DJANGO_WSGI_MODULE}:application --bind=127.0.0.1:8001 \ --name $NAME \ --workers $NUM_WORKERS \ --log-level=debug \` Any idea is really appreciated.

  Read the article

• How to change the download save directory in ktorrent from a remote host

  - by Garethj94

  So I have ktorrent running on a server and I don't have the ability to see the X11 display for the client, and I need to change my download directory since I like to keep everything very organized. So I need a way to change the download directory for the program as a whole, not like decide where to put each and every torrent that I download. This can't be done through the webui preferences so I'm guessing that I'll have to do it through ssh somehow but from what I've read there really isn't a command to use. Also the way that I have the application run is on startup my server runs the command ktorrent, so it will already be running when I want to change the download location so I assume that I will have to restart the program as well. If anyone knows how to do this it would be much appreciated, and I can't think that I'm the only person to want this feature.

  Read the article

• SSL on app - nginx web server

  - by Adam

  I am running an nginx web server where I redirect all http requests to https (with a self signed cert). Here is how I REDIRECT all http requests to https in the nginx config file: server { listen 80 default_server; listen [::]:80 default_server ipv6only=on; server_name my.server.ip; return 301 https://$server_name$request_uri; Problem is - I cannot seem to do so for an app running on a port. Example: http://my.server.ip:1234 does not redirect to https://my.server.ip:1234 ir works fine on all other urls like http://my.server.ip/temp etc. How can I modify the nginx config file to force that app url through ssl?

  Read the article

• What could cause a file system to spontaneously unmount or become invalid for a short time?

  - by Ichorus

  We've got DB2 LUW running on a RHEL box. We had a crash of DB2 and IBM came back and said that a file that DB2 was trying to access (through open64()) unmounted or became invalid. We have done nothing but restart the database and things seem to be running fine. Also, the file in question looks perfectly normal now: $ cd /db/log/TEAMS/tmsinst/NODE0000/TEAMS/T0000000/ $ ls -l total 557604 -rw------- 1 tmsinst tmsinst 570425344 Jan 14 10:24 C0000000.CAT $ file C0000000.CAT C0000000.CAT: data $ lsattr C0000000.CAT ------------- C0000000.CAT $ ls -l total 557604 -rw------- 1 tmsinst tmsinst 570425344 Jan 14 10:24 C0000000.CAT With those facts in hand (please correct me if I am mis-interpreting the data at hand) what could cause a file system to 'spontaneously unmount or become invalid for a short time'? What should my next step be? This is on Dell hardware and we ran their diagnostic tools against the hardware and it came back clean.

  Read the article

• Connect to my virtualbox mysql server

  - by WebweaverD

  I wonder if someone here could help me, this is my set up: I am on a windows 7 machine running a ubuntu virtualbox as my local web server and database server (mysql). I have just got hold of a copy of Komodo which i am running on my windows machine which I would like to hook up to my database. The fields it needs are hostname, port, socket, username and password. I know the username/password but am unsure how to find out what to put for the other fields. The ubuntu vb has an ip of 192.168.0.10, which is in my hosts file as http://swishprint.dev I hope I have asked this in the right place, any help much appreciated.

  Read the article

• Can I redeploy Citrix Xencenter Images in Amazon EC2?

  - by Mike Pinch

  Okay - I'm running Citrix Xencenter in my datacenter. My understanding is that Amazon EC2 is a very customized flavor of Xencenter. Based on that, I would like to know whether there is a method to utilize the .VHD disk images generated by Citrix Xencenter in the Amazon EC2 cloud. I realize that I can install tools into the OS and make my own images but that is not what I'm looking for. I'd like the efficiency of taking the images and redeploying them, or at least converting then redeploying. I basically would like to have all my backups running in the cloud, so that is my motivation.

  Read the article

• Getting started with VNC

  - by Stephen

  I have subscribed to a VPS service for the purpose of running some remote applications. To do this I'm going to need a remote desktop of one sort or another. With this in mind it was suggested that I try Ubuntu. The installation that was prepared for me was Ubuntu 11.10 64 bit (Ubuntu 11.10 (GNU/Linux 2.6.18-348.4.1.el5.028stab107.1 x86_64)) From here I used apt-get install ubuntu-desktop which completed successfully. I rebooted the machine and reconnected via ssh. When I attempt to connect from TightVNC on my Windows machine I get a message about the session being actively refused. What should I do to confirm the service is running? Do I need to setup a firewall rule to allow the ports to pass through? (I am a linux newb so explicitness is appreciated)

  Read the article

• How to route traffic from VM (Parallels) over an Open VPN connection on the host (OS X)

  - by withakay

  Scenario: I have a Mac running Lion that is connected to an OpenVPN server I have a Windows XP VM (running on parallels, but I don't think this is important) I want to be able to route traffic from the XP VM via the host Mac's OpenVPN connection so that I can log on to a domain. The remote network is 172.16.0.0/23 (255.255.254.0) Open VPN is configured to supply address in the 10.100.101.0/24 range and sets up the routing to 172.16.0.0 using the gateway 10.100.101.1/32 My local network is 192.16.1.0/24 NOTE: I do not want to install OpenVPN into the XP virtual machine as I would have to use a passwordless key in order for OpenVPN to connect before logon. Anyone got any ideas?

  Read the article

• how can I get back /usr/local/bin/mysql on Snow Leopard?

  - by Ole Media

  From terminal and trying to uninstall macports, I ran a command, rm -rf / macports...., that erased bunch of stuff. I feel ashamed about this, not realizing the space after /. Since then, mysql is running but I cannot execute any of the mysql commands because it is not under /usr/local/bin/ I went ahead an reinstall mysql but without luck. What steps do you recommend on doing in order to be able to run mysql, mysqlduml, mysqladmin, from terminal? I can access databases from phpmyadmin, so mysql is running, don't ask me how.

  Read the article

• Cisco: changing VTP mode server/client to transparent

  - by J. Smith

  I have around 40 L2 switches (2960, 3560, 3500, 3750) running in VTP client mode and one L3 switch (6500) running in VTP server mode, all connected together. I would like to switch everything in VTP transparent mode without any interruption of service. I've already test on a poc version with 3 switches (Catalyst 2950, 3560 and 3750). Using serial and SSH connection, it is seems working but i'm not sure it is enough representative compare to the real network. Knowing that the VTP Pruning is enabled, I am wondering what would be the best procedure to proceed the changement. I've read that we could lost connection by keeping it enabled. Should I change the server or clients first? Is it important to change the VTP domain and VTP Pruning parameters?

  Read the article

• force connection using USB adapter

  - by James

  Hi all I am new to Linux, so even though this is probably a simple problem it remains unsolved after more then 3 hours of googling :-( I run running ubuntu 10.04 LTS on an Acer Aspire 5520G . the laptop has a wireless adapter, but since I wanted better range I got an Edimax EW-7711USN USB adapter. now , when running ifconfig I am able to see both adapters where as the laptop native adapter is listed as wlan0 and the usb adapter is listed as wlan1. but listing available networks from the wireless network applet , all the connection are listed under wlan0 , the usb adapter is costencly listed as disconnected. this is what I have been trying to do so far 1) ifconfig wlan0 down - I got disconnected from the net but still was not able to get the usb to connect 2) used the wireless connection dialog to connect to a hidden network with the usb adapter - I was able to connect to the network but with no Internet access 3) disable wireless using the laptop function button - both wireless adapters where disabled can anyone suggest a way to connect to to the wireless network using the USB adapter rather then the built in one ? Thanks

  Read the article

• Realtime file-level mirroring from local NTFS to network drive

  - by hurfdurf

  We have some data collection machines running WinXP. After a new file is written, we would like to immediately copy the new file to network storage (a NetApp CIFS share) automagically. We need realtime or near realtime copies generated (copy upon filehandle close would be fine -- these are not long-running system logs). Two commercial applications I've found so far are MirrorFile and IBM's Tivoli CDP. Are there any reliable open source programs or simple ways to get Shadow Copy to do something similar? Bonus points if it runs as a service.

  Read the article

• How are file permissions applied for shared drives?

  - by sleske

  I have two computers: A (running Windows Vista) B (running XP). I shared C: on computer A (as \\A\C ), and require a username (X) plus pw to access it. If I browse the the share \A\C on computer B, after entering username+pw I can access most folders, but one folder "\\A\C\F" gives me "permission denied". I looked at that folder's permissions on A, and it has full access permissons for all "Administrators". I use the account "A\X" to authenticate when accessing the share on A. X is a user account (on A) that is an "Administrator" according to Window's user management. Still, I cannot access this folder. If I explicitly add the "X" account to the accounts that may access folder F (under Properties / Security), I can access it without problems. I do not understand why I need to explicitly grant permission for X to get access to F. Is it not enough that X is an Administrator account?

  Read the article

• What methods are there to configure puppet to serve resources for multiple environments?

  - by cclark

  I seem to come across two ways for using puppet in multiple environments: 1) Install a puppetmaster in each environment and only update the recipes from source control for that environment when ready to deploy the recipes in that environment. 2) Use one puppetmaster and use a variable in the puppet.conf of each client to specify the environment and then in the puppetmaster specify a different modulepath for each environment and each of those paths is updated to the branch of the recipe repository intended for that environment (e.g. dev, staging, production). Only running one puppetmaster seems like it is one less piece of infrastructure to keep running but there is some additional complexity in the configuration. Are there additional pros or cons to one of these methods or something which I'm missing entirely?

  Read the article

• Who should own exim4 under debian?

  - by raindog308

  Installed debian from DVD. And now I see exim4 is running owned by UID 107. There is no user 107 in my /etc/passwd. Same problem on another system (owned by UID 101), so I suspect this is a debian problem...? Running squeeze on both. So under debian, who should own the mail system? This is what I have installed: # dpkg -l | grep exim ii exim4 4.72-6+squeeze2 metapackage to ease Exim MTA (v4) installation ii exim4-base 4.72-6+squeeze2 support files for all Exim MTA (v4) packages ii exim4-config 4.72-6+squeeze2 configuration for the Exim MTA (v4) ii exim4-daemon-light 4.72-6+squeeze2 lightweight Exim MTA (v4) daemon The binary itself is owned by root: -rwsr-xr-x 1 root root 758852 May 12 2011 /usr/sbin/exim4

  Read the article

• How to create video file from DVD

  - by pkaeding

  I want to take the DVD video slideshow that I got from my wedding photographer, and put the video on youtube (I have permission, I made sure to get the non-exclusive rights to use anything she created while working for me in any way I wanted when we working out the terms before-hand). Can anyone suggest the best way to get a video file that can be uploaded to YouTube from this DVD? The source DVD is not encrypted, so I don't need to worry about that. I am using a Mac, so Mac-friendly suggestions are preferred. Thanks! EDIT: So, I tried Handbrake, and it looks very promising. However, When I select the title in Handbrake, it says it is about 12 minutes long. The resulting file ends up only being about 4 minutes long, and the music is messed up. It seems to be going normally through the photo transitions, but removing the time that the slideshow stays on each photo. I believe the DVD was created using iDVD. Does it do anything weird to save space by varying hte framerate, or anything like that? Are there special settings in Handbrake I need to use?

  Read the article

• Domain account credentials fails to start scheduled tasks

  - by neoco

  I have 2 Windows 2000 servers in a domain 'DC', which run numerous windows scheduled tasks under the 'DC\Task-User' account. These tasks are and have been running successfully in the past couple of years without any account/password modifications. Yesterday, the tasks went to 'Could not start' status. Myself having an admin account, was able to run these tasks with my credentials. Today, I ran the tasks again under the DC\Task-User account and they seem to be running fine without any issues. This has happened in the past too. I'm not into networking so don't know much about the underlying problem. Has this something to do with a Domain controller account authentication? Any pointers will be great!

  Read the article

• Best use of new express card on Windows

  - by jckdnk111

  I just bought a 48GB SSD express card for my laptop and I am trying to decide how best to use it. I will be running some sort of virtualization (prob VirtualBox) to test / learn Windows Server administration. I am running Windows 7 Ultimate 64 bit. I have 4GB of RAM and a 7200 RPM SATA hard disk. The express card will read at 115MB/s and write at 65MB/s. So how best to use this new disk? Readyboost, relocate pagefile, store VM disks, mix / match?

  Read the article

• phpmyadmin error #2002 cannot connect to mysql server

  - by Joe

  so i am getting this error when trying to connect to my mysql server. i have reinstalled MYSQL and php several times and tried a slew of command line work from info around the web.mysql is running and i know that my mysql.sock exists and is located in ~/private/tmp/ and also in ~/tmp/. i also have plenty of hard drive space. i have installed and setup phpmyadmin correctly only adding a password to 'Password for config auth'. AND i have connected to the server via Sequel Pro. so my question is what the heck is going on that i can't connect to the server via phpmyadmin? any guesses? also i'm on a 64-bit intel mac running snow leopard

  Read the article

• Drupal7 doesn't detect MySQL on CentOS, but Wordpress3 does?

  - by jyaworski

  Hey guys. I'm running CentOS 5.5 here with Apache2, PHP5, and MySQL 5. My wordpress install on the same system runs perfectly, but the drupal7 install script only detects SQLite. The mysql module is enabled in php.ini, so that isn't the problem. Do you think it could be something with Drupal 7, or my PHP install? I tested it on localhost (I'm essentially running ArchLinux with Apache) and it installs just fine. I don't see a difference between my local php.ini and my server php.ini. I get this when accessing install.php on the server. SQLite The type of database your Drupal data will be stored in. Your PHP configuration only supports a single database type, so it has been automatically selected. Edit: The mysql PDO module is installed already.

  Read the article

• Want shortcut to OpenVPN GUI connect in Windows 7 (without going through the system tray)

  - by Leo Alekseyev

  I am running OpenVPN with OpenVPN GUI under Windows 7 x64. Currently, to connect I need to right-click the OpenVPN icon in the system tray and select "connect", which brings up the password prompt. What I want: some sort of a batch file or a shortcut that can be invoked to initiate OpenVPN connection. Motivation: I prefer running my system keyboard driven; I usually hide my taskbar and don't like needlessly fishing in the system tray. Currently, OpenVPN is the only program that forces me to interact with the taskbar. Surely there is an alternative approach, possibly invoking some command line trickery and/or autohotkey, but so far I haven't been able to find it.

  Read the article

• Exchange and external mail server

  - by Bahrain Admin

  Hi, We have our domain hosted externally with Network Solutions, and our mail server is running from there. We have a branch office in Bahrain and have 3 users who would like to use their email addresses on a local exchange server running at the Bahrain office. The Exchange server is currently only used for internal mail,contacts and calendaring. I've used a third=party program to download the POP3 mail to their exchange accounts. so they can receive mail from outside. The issue is in sending mail using their external addresses. I've setup their exchange accounts to include their external address. But we get an error message stating that the IP is not authorized. I tried putting the local ISP as the smart host, but then we get an error message stating that the Address was rejected. I tried using our own external mail server as the smart host, but then the message "Relaying is denied" comes up. Any suggestions? Thanks Arun

  Read the article

• How to Increase Memory Allocated to IIS .NET Application?

  - by Mark Hansen

  We are using Windows 2008 R2 and IIS 7 running on Amazon EC2. IIS is running a single .NET application written in C#. We are having performance issues and I want to give the application more memory, but I cannot figure out how to do it. How do I control the amount of memory that the CLR gets? I'm a total newbie with IIS, .NET and the CLR. If I were working with Java, I would just use the -Xmx flag to increase the memory available to the JVM (e.g., -Xmx3000m for 3GB). But, I cannot seem to figure out how to do this in the Windows world.

  Read the article

< Previous Page | 399 400 401 402 403 404 405 406 407 408 409 410  | Next Page >