Search Results

Search found 20997 results on 840 pages for 'adobe ideas'.

Page 404/840 | < Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >

• Keyboard/Mouse not working when windows vista has reached login screen

  - by Jonas

  I currently have a problem with a system (vista home premium, 64bit). USB kbd/mouse will not work when windows has booted/loaded their drivers and Im stuck at the login screen with no working input devices. None of the available boot options after F8 will boot to working kbd/mouse. They work in the bios setup and they seem powered all the way until a few seconds before the login screen. Legacy USB devices is also enabled in the bios. They also work with the recovery dvd, but I am unable to start the device manager to check or uninstall the mouse/kbd drivers. Cant get devmgmt.msc nor devmgr.dll (with rundll32) to work. System repair does not detect the problem and there are no available restore points (it was disabled). Any ideas?

  Read the article

• Site on IIS 7.5 accessible via SSL on server, but not from local network

  - by bnieland

  I have a site set up on IIS 7.5. I added the following binding... type: https Host Name: [Blank] Port: 443 IP Address: 192.168.1.6 Binding Information: [Blank] I can access the site via https://192.168.1.6 from the server itself. When I try to access the site from another machine (193.168.1.4) on the same sub-net via https://192.168.1.6 I get no response. http://192.168.1.6 returns the site as expected. I have used wireshark to examine the packets on the server, the first of which I have included as an image. There were two other packets, very similar to this. There was no response from the server. Any Ideas?

  Read the article

• Ubuntu in Virtualbox - web server very slow when using local IP address

  - by Lenny Marnham

  I'm using Ubuntu (Lucid Lynx) to learn Ruby On Rails. I'm running Ubuntu in VirtualBox (the host is Windows 7 Ultimate), using bridged networking. When I run my Rails app and point the browser at it using localhost:3000, the app responds immediately and my page is rendered in a second or two. However, if I use 10.0.0.5:3000 (where 10.0.0.5 is my IP address reported using ifconfig), the response from my rails app is incredibly slow - maybe 30 seconds or more for the server to respond and render the page. This happens in both Firefox and Chrome. Also, when I hit the Rails app from the host (to test it in IE), I get the same slooooooow response. Any ideas what might be going on? I've tried it with two different routers, and on two different networks (work and home) with the same result. Cheers all.

  Read the article

• How to make the internal subwoofer work on an Asus G73JW?

  - by CodyLoco

  I have an Asus G73JW laptop which has an internal subwoofer built-in. Currently, the system detects the internal speakers as a 2.0 system (or I can change do 4.0 is the only other option). I found a bug report here: https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/673051 which discusses the bug and according to them a fix was sent upstream back at the end of 2010. I would have thought this would have made it into 12.04 but I guess not? I tried following the link given at the very bottom to install the latest ALSA drivers, here: https://wiki.ubuntu.com/Audio/InstallingLinuxAlsaDriverModules however I keep running into an error when trying to install: sudo apt-get install linux-alsa-driver-modules-$(uname -r) Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-alsa-driver-modules-3.2.0-24-generic E: Couldn't find any package by regex 'linux-alsa-driver-modules-3.2.0-24-generic' I believe I have added the repository correctly: sudo add-apt-repository ppa:ubuntu-audio-dev/ppa [sudo] password for codyloco: You are about to add the following PPA to your system: This PPA will be used to provide testing versions of packages for supported Ubuntu releases. More info: https://launchpad.net/~ubuntu-audio-dev/+archive/ppa Press [ENTER] to continue or ctrl-c to cancel adding it Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.7apgZoNrqK --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv 4E9F485BF943EF0EABA10B5BD225991A72B194E5 gpg: requesting key 72B194E5 from hkp server keyserver.ubuntu.com gpg: key 72B194E5: public key "Launchpad Ubuntu Audio Dev team PPA" imported gpg: Total number processed: 1 gpg: imported: 1 (RSA: 1) And I also ran an update as well (followed the instructions on the fix above). Any ideas?

  Read the article

• iPhone Docked Playing Through PC, Buzzing.

  - by DrFloyd5

  Hi. I have an iPhone that I fit into an Apple dock. There is an audio cable from dock into the line in on my sound card. My headphones are plugged into the line out. I get this really quite buzz that is fairly constant, but changes as the iphone "does stuff". It's not so bad when the music is playing. But when it stops I get the buzz, so I can't really use my headphones as "noise cancellation." It doesn't help to change my volume sliders on the PC. Any ideas? Thanks in advance.

  Read the article

• CSS file not served by IIS 7.5 after multiple clear cache refreshes in a row in browser

  - by KenB

  We are experiencing an interesting issue with IIS 7.5 static caching and a css file. When we use IE to hit the page in question everything works fine - 200 OK on css file. When we refresh the page it works fine - 304 Not Modified on css file. When I refresh again with control key it reloads fine - 200 OK on css file. Now if I do a control key + refresh multiple times in a row really fast the css fails to load and in the developer tools network it says "Loading..." for the css file and it hangs never coming back. Any ideas?

  Read the article

• Problem installing qtbase

  - by teucer

  I am getting the following error when installing "qtbase" package for R: [ 68%] Building CXX object smoke/qt/CMakeFiles/smokeqt.dir/x_1.cpp.o /home/mroot/qtbase/kdebindings-build/smoke/qt/x_1.cpp: In static member function ‘static void __smokeqt::x_QAbstractPrintDialog::x_8(Smoke::StackItem*)’: /home/mroot/qtbase/kdebindings-build/smoke/qt/x_1.cpp:4893: error: cannot allocate an object of abstract type ‘__smokeqt::x_QAbstractPrintDialog’ /home/mroot/qtbase/kdebindings-build/smoke/qt/x_1.cpp:4834: note: because the following virtual functions are pure within ‘__smokeqt::x_QAbstractPrintDialog’: /usr/include/qt4/QtGui/qabstractprintdialog.h:89: note: virtual int QAbstractPrintDialog::exec() /home/mroot/qtbase/kdebindings-build/smoke/qt/x_1.cpp: In constructor ‘__smokeqt::x_QAbstractPrintDialog::x_QAbstractPrintDialog()’: /home/mroot/qtbase/kdebindings-build/smoke/qt/x_1.cpp:4896: error: no matching function for call to ‘QAbstractPrintDialog::QAbstractPrintDialog()’ /usr/include/qt4/QtGui/qabstractprintdialog.h:116: note: candidates are: QAbstractPrintDialog::QAbstractPrintDialog(const QAbstractPrintDialog&) /usr/include/qt4/QtGui/qabstractprintdialog.h:113: note: QAbstractPrintDialog::QAbstractPrintDialog(QAbstractPrintDialogPrivate&, QPrinter*, QWidget*) /usr/include/qt4/QtGui/qabstractprintdialog.h:86: note: QAbstractPrintDialog::QAbstractPrintDialog(QPrinter*, QWidget*) make[3]: *** [smoke/qt/CMakeFiles/smokeqt.dir/x_1.cpp.o] Error 1 make[3]: Leaving directory `/home/mroot/qtbase/kdebindings-build' make[2]: *** [smoke/qt/CMakeFiles/smokeqt.dir/all] Error 2 make[2]: Leaving directory `/home/mroot/qtbase/kdebindings-build' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/mroot/qtbase/kdebindings-build' make: *** [all] Error 2 ERROR: compilation failed for package ‘qtbase’ * removing ‘/home/mroot/R/i686-pc-linux-gnu-library/2.12/qtbase’ Any ideas?

  Read the article

• USB Dongle detected but connect option greyed out

  - by GrimSweeper48

  Hey I have just converted one of our physical license servers into a VMware server. It uses a USB key for a license doggle (WIBU-Key) for some software we have. Now it detects that the USB is plugged in on VMware Server (shows up as Wibu-box) under devices. But when I click on it all the options are greyed out including the connect and as such the VM can't read it? The VM is running Windows Server 2003. Anyone have any ideas? Ive attached an image so you can see clearer.

  Read the article

• Ubuntu 13.04 Sound Problem after following weird commands

  - by user206356

  After launching a few commands : echo autospawn = no >> ~/.config/pulse/client.conf #use ~/.pulse/client.conf on Ubuntu <= 12.10 killall pulseaudio $LANG=C pulseaudio -vvvv --log-time=1 > ~/pulseverbose.log 2>&1 My sound does not work. (just with the speakers, with headphones it works but I can not change the volume) The sound icon on the top right corner does show a speaker with a single non continuous line. I can not change the volume; it is frozen. There can be an extremely low output of the sound (I hear something but I am not sure...) It does not show a single output device that is avalaible, not even the "dummie". I have tried to reset pulseaudio, alsa, remove it, purging it, reinstalling it, without having success. EDIT: I have tried launching pulseaudio via the terminal. It worked :D However, I am very surprised why it does not automatically start at the start of the computer. Any ideas ? Here the console output : W: [pulseaudio] authkey.c: Failed to open cookie file '/home/simonm/.config/pulse/cookie': No such file or directory W: [pulseaudio] authkey.c: Failed to load authorization key '/home/simonm/.config/pulse/cookie': No such file or directory W: [pulseaudio] authkey.c: Failed to open cookie file '/home/simonm/.pulse-cookie': No such file or directory W: [pulseaudio] authkey.c: Failed to load authorization key '/home/simonm/.pulse-cookie': No such file or directory

  Read the article

• Installing linux on computer with Marvell adapter

  - by Seth

  I recently reinstalled my computer and decided that I want to have a native installation of linux side by side with windows (got tired of VMWare). The thing is upon installation (debian) everything goes fine until the disc detection section - linux can't find my western digital 1TB drive (IDE mode). I don't have the installation disc with me now, but I think that when i changed the mode to AHCI everything worked, though Windows couldn't boot so this is not an option. I have a Marvell 91xx controller. Any ideas?

  Read the article

• Getting a Non-Genuine windows message on a Genuin Windows 7

  - by user36257

  I have a Genuin Win7 enterprise on my Laptop. A few hours ago when I wanted to log into windows it did not accept my Password. I used the safe mode and it accepted the password I was using before this new password. It is the laptop for work and we have a changing password policy for every three months, so the pasword that I could use in SAFE MODE was the password I had for the last previous threee months. ... after that I used SYSTEM RESTORE and it reveretd it back to Yesterday ... so this time I could loging successfully with my current password. BUT It shows me a message that I am a victim of software counterfeiting and when I restarted the windows again and logged into windows, this time it is just a black desktop. weird...any ideas?

  Read the article

• High system cpu load (%sys), system locks

  - by Mark

  For the last two weeks we are having intermittent severe spikes in system cpu usage (shown as %sys), which last for maybe half a minute, locking most processes, including ssh. I've been trying to figure this out, but atop doesn't show anything relevant (system usage for processes it shows is insignificant), spikes are intermittent and I could not reproduce the spike using any workload for the web application this webserver hosts. If you have any ideas on how to debug high %sys and (sometimes) %si CPU usage, please share them. System specs (don't know if any of this is relevant): Dedicated server, CentOS 6, core i7 950, consistent 4 to 8 GB RAM free at any time, hard drives are in RAID-1. Additional info: dmesg output doesn't change between spikes /var/log/messages doesn't change between spikes Here is cat /proc/vmstat Here is output of mpstat 1 during a typical spike Add 07.11.11: looks like simple reboot restored system state, and we might never know what caused the disturbance in first place.

  Read the article

• How can I disable write protection in my USB flash drive?

  - by 97847658

  My USB flash drive is currently unusable because it somehow (quite suddenly!) became write protected. I have googled around and tried many solutions to this problem, but none of them have worked so far. Here are some of the solutions I've tried: The drive has no tangible switch or button. Formatting the drive won't work, even in command line, even "low level formatting", because the drive is (after all) write protected. Changing certain registry keys to 0 doesn't seem to work. Repair_Neo2.9.exe says "USB Flash Disk not found!" One factor that may make it more difficult to find a solution: I have no idea what the make or model is, because I received the USB flash drive from my university as a gift. So if anyone knows how to find the make and model, that alone might be helpful. Any ideas? Thanks.

  Read the article

• Remote connect to mysql server?

  - by LF4

  I've been trying to figure out why I keep getting this error when I try to connect to the MySQL server with the following commands. $~ mysql -u username -h SQLserver -p Enter password: ERROR 1045 (28000): Access denied for user 'username'@'myIP' (using password: YES) I've done the following: Port is open in the firewall other wise I wouldn't get the error it'd just timeout. MySQL server not running with skip-networking or bind-address username has host as '%' and I can connect locally so the password is correct. GRANT USAGE ON *.* TO username@% IDENTIFIED BY 'password'; FLUSH PRIVILEGES; I wanted to know if anyone had ideas or ran into this issue before and solved it? mysql> select user, host from mysql.user where user='username'; +----------+------+ | user | host | +----------+------+ | username | % | +----------+------+ 1 row in set (0.00 sec) mysql> show grants for 'username'; +----------------------------------------------------------------------------------------------------------------+ | Grants for username@% | +----------------------------------------------------------------------------------------------------------------+ | GRANT ALL PRIVILEGES ON *.* TO 'username'@'%' IDENTIFIED BY PASSWORD '*F42AD03PASSWORDHASHADF4021C86B' | | GRANT ALL PRIVILEGES ON `DB2`.* TO 'username'@'%' | +----------------------------------------------------------------------------------------------------------------+ 2 rows in set (0.00 sec)

  Read the article

• Chromium never stops loading iGoogle

  - by regulatethis

  I almost always keep a tab open on google.com/ig. Recently I've noticed that the "loading" animation for that tab never stops spinning, even though the page appears to be fully loaded. Even though there's no direct problem with this, I find the animation really distracting and to be honest it's driving me crazy. I've done a few things to try to figure this out. I've removed every single one of my gadgets (so my igoogle is blank), but that made no difference. I've disabled adblock and scriptno. nothing. I've watched the network console in developer tools to look for resources that haven't finished loading, but it looks like everything is done. I'm all out of ideas. For my sanity's sake, please help.

  Read the article

• Forwarding requests throught Apache to openVPN

  - by Ency

  I am wondering if it is possible to redirect requests through Apache to eg. OpenVPN. As long as I need to bypass firewall, I need to use port 80/443 for openVPN, but there is Apache server which has both port for itself. Client ---> Firewall (allows 80/443 only) --->| ---> Apache (80/443) ---> OpenVPN (1194) | -------------------------------------------- My Server I was thinking about mod_proxy, but I am not sure if it is good idea, have you got any ideas? I hope possible solution will be applicable on virtual host as well.

  Read the article

• SSL Certificate only works when session active in Server 2008

  - by CodeMonkey1

  I have a web app that uses an installed certificate to send a web request to a 3rd party web service. This has worked for a long time on Windows Server 2003, but just recently we found a problem with it on 2008 installations. When logged into the server as the same user the App Pool uses, either locally or via remote desktop, the web app and it's secure 3rd party request works fine. However, when there are no user sessions open, the 3rd party request fails, as if the certificate were not attached to the web request. Any ideas?

  Read the article

• Is it possible to run my other partition inside of a VM?

  - by Parris

  So I have dual boot machine with windows 7 and ubuntu 11. I would like to, at times, run a vm from one partition to another. For example sometimes I would like to do certain things in windows while still using ubuntu. At other times, perhaps the opposite would be more effective. Why? Well running a vm is fairly resource intensive, and depending on what I am doing primarily I would rather be in one operating system vs the other, or perhaps it is just convenient. An important consideration is that you should NOT need to "copy" or "duplicate" the partition in any way. The VM should just read the partition as if it were a standard image. Any ideas? I am using virtual box currently. I have also used virtual pc. I could probably get a copy of vmware workstation if needed.

  Read the article

• What are possible reasons why a calendar entry in OWA is at a different time than in Outlook?

  - by Ken Pespisa

  We have two Exchange 2003 servers, our primary server and a front-end server that hosts Outlook Web Access (OWA). When I open my boss' calendar via Outlook 2007 (from my Outlook client as well as hers) I see the event scheduled for 10:30 am. When I open her calendar via Outlook Web Access, the same event is scheduled for 4:30 am. I don't understand Exchange well-enough to imagine how this is possible. If you have any ideas why this could be happening, I greatly appreciate it. I'd also very much appreciate any insight you have to how this could be possible. There must be some cached data on the front-end server that causes the calendar entry to appear at a different time, I suppose. Any insight into how Exchange manages that cache and where I could look for an issue would be very helpful. Thank you!

  Read the article

• udev rule not being executed

  - by jyavenard

  I have the following device that udevadm lists as: looking at device '/devices/pci0000:00/0000:00:1c.7/0000:09:00.0/usb6/6-2/6-2:1.0/ttyUSB0/tty/ttyUSB0': KERNEL=="ttyUSB0" SUBSYSTEM=="tty" DRIVER=="" looking at parent device '/devices/pci0000:00/0000:00:1c.7/0000:09:00.0/usb6/6-2/6-2:1.0/ttyUSB0': KERNELS=="ttyUSB0" SUBSYSTEMS=="usb-serial" DRIVERS=="pl2303" ATTRS{port_number}=="0" looking at parent device '/devices/pci0000:00/0000:00:1c.7/0000:09:00.0/usb6/6-2/6-2:1.0': KERNELS=="6-2:1.0" SUBSYSTEMS=="usb" DRIVERS=="pl2303" ATTRS{bInterfaceNumber}=="00" ATTRS{bAlternateSetting}==" 0" ATTRS{bNumEndpoints}=="03" ATTRS{bInterfaceClass}=="ff" ATTRS{bInterfaceSubClass}=="00" ATTRS{bInterfaceProtocol}=="00" ATTRS{supports_autosuspend}=="1" So I created the rule: KERNEL=="ttyUSB0", SUBSYSTEM=="tty", SUBSYSTEMS=="usb-serial", DRIVERS=="pl2303", KERNELS=="6-2:1.0", SYMLINK+="cc128serial" this doesn't work. However if I do: KERNEL=="ttyUSB0", SUBSYSTEM=="tty", SUBSYSTEMS=="usb-serial", DRIVERS=="pl2303", SYMLINK+="cc128serial" then it works. I tried with KERNELS=="6*" etc.. to no available any ideas ? thanks

  Read the article

• Windows Server 2003 - Give User Full Admin Privileges

  - by APShredder

  I am running Windows Server 2003. There are a couple of user accounts that I would like to promote to Administrator accounts. I've tried several ways to do so, but I am still relatively new to setting up a server. If anyone has any ideas on how to go about promoting these users, I thank you in advance. EDIT: I should probably mention that this a domain controller. I didn't realize that this changed the answer I was looking for. I apologize, like I said before I am new to the world of servers. EDIT #2: I've added the users to the Administrator group like most of the answer recommended, but the users don't seem to have admin rights yet. I think this might be because they are also in the Domain Users group, which I can't seem to be able to remove them from.

  Read the article

• Allow Internet Access with Default Gateway on Windows 7 VPN Server

  - by Hakoda

  I have a Windows 7 box at home (which I'll refer to as Home-VPN) that runs a simple PPTP VPN server. I have a range of 2 IP address (192.168.1.10-192.168.1.11) to give out, although the server is only able to give out one concurrent connection. Ports 1723 & 47 are correctly forwarded to the server. IPv6 is disabled on both Home-VPN and the client. I setup Home-VPN just like this Youtube video: http://www.youtube.com/watch?v=1s5JxMG06L4 I can connect to it just fine but I can't access the Internet when connected to Home-VPN, all outside web servers (eg. google.com, mozilla.org, apple.com) are unreachable. I know I can uncheck "Use Default Gateway on Remote Servers" on the client side under IPv4 settings but that will route all my traffic through my current connection, rather than through the VPN, defeating the purpose of said VPN. Any ideas on how I can fix this?

  Read the article

• Cant connect to home server

  - by user52141

  Trying to figure out what I might be doing wrong. I installed XAMPP - and everything looks fine. If I go to localhost everything comes right up. But when I go to my IP address, I just get a message that the browser could not connect to it. I go into my router and set up port forwarding for port 80 etc, and I even tried putting the server as a DMZ - still nothing. I turned the firewall off to see if that was interfering in some way, then uninstalled it completely for good measure, made no difference. I'm out of ideas.. oh, and yes I have a static IP address.

  Read the article

• How do I log in to the ubuntu 10.04 server using grub2 from a remote computer/terminal with GUI running

  - by Steve Cornall

  I upgraded my server from ubuntu 8.04 to 10.04. It now uses the grub2 bootloader. In 8.04 from the grub log-in page I could select the option log in to server and thereby connect through SSH directly to my server and have the GUI running. I can currently log in to my upgraded server now from any of my 8.04 machines using grub1 with the GUI running. I cannot log in that way from a machine that uses grub2 and ubuntu 10.04. I want to upgrade my entire network to ubuntu 10.04 but cannot until I know how to log in to the network from grub2 with the gui open. I have exhausted all my ideas as to the solution to this problem. Any help would be most appreciated. Thank-you

  Read the article

• Fourth texture = segmentation fault

  - by Robin92

  I keep on getting segmentation fault each time I load fourth texture - what type of texture, I mean filename, does not matter. I checked value of GL_TEXTURES_STACK_SIZE which turned out to be 10 so quite more than 4, isn't it? Here're code fragments: funciton to load texture from png static GLuint gl_loadTexture(const char filename[]) { static int iTexNum = 1; GLuint texture = 0; img_s *img = NULL; img = img_loadPNG(filename); if (img) { glGenTextures(iTexNum++, &texture); glBindTexture(GL_TEXTURE_2D, texture); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MIN_FILTER,GL_LINEAR); glTexParameteri(GL_TEXTURE_2D,GL_TEXTURE_MAG_FILTER,GL_LINEAR); glTexImage2D(GL_TEXTURE_2D, 0, img->iGlFormat, img->uiWidth, img->uiHeight, 0, img->iGlFormat, GL_UNSIGNED_BYTE, img->p_ubaData); img_free(img); //it may cause errors on windows } else printf("Error: loading texture '%s' failed!\n", filename); return texture; } actual loading static GLuint textures[4]; static void gl_init() { (...) //setting up OpenGL /* loading textures */ textures[0] = gl_loadTexture("images/background.png"); textures[1] = gl_loadTexture("images/spaceship.png"); textures[2] = gl_loadTexture("images/asteroid.png"); textures[3] = gl_loadTexture("images/asteroid2.png"); //this is causing SegFault no matter which file I load! } Any ideas? Problem is present on both Linux and Windows.

  Read the article

< Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >