Search Results

Search found 25182 results on 1008 pages for 'ask'.

Page 404/1008 | < Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >

  • Ubuntu 12.10 with kernel 3.5.0-18

    - by Chaitanya
    I had ubuntu 12.04 with kernel 3.0.2. Today I have updated my system and got 12.10 with kernel 3.5.0-18. Now when I boot my machine with 3.5 kernel, it starts until the page where I enter my password. Within seconds, I get a page with looooong list of some commands or list. I cant take screenshot of that. It looks something like, [1.2234978942837]kjsahfa;lsfksld;fkjsf;owieurwirejw/rnw;erkjwelrjw2309480432 [1.3294823498230948]as;lfjsf;iuwrijrwjlkerjw;rekwer;lkwjre;lkjRIJWEORIWE'JJA; something like this. Luckily, in my boot page, I have 3.0.2 kernel also. When I boot with 3.0.2 kernel there is no problem. But when I boot with 3.5.0, it throws that wierd error. I wont be able to do anything at that time. None of the keys work. I have to forcibly shutdown the machine and restart with 3.0.2 kernel. Please help..... Thanks, Chaitanya.

    Read the article

  • Cannot enable Additional drivers for Broadcom in 12.10

    - by Compt
    tl;dr version: Additional Drivers does not work for enabling a driver in Ubuntu 12.10, however it worked in 12.04. I upgraded to Ubuntu 12.10 from 12.04 via a live USB. I did a fresh install to avoid any conflicts. From 12.04 I know that my wireless card has proprietary drivers that could be installed via Additional Drivers. I did eventually find additional drivers in the software sources menu, however when I attempt to switch to Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source, it not only does not work, it in fact disables my wireless completely. The only way to revert this is to restart, and revert back to "do not use the device". Then upon another restart, my wireless will function once again. I was curious if anyone else had this issue, and if there was a fix for it as of yet. I looked on launchpad and it may be a potential bug, but I am unsure. Any help would be greatly appreciated (and sorry for that wall of text). Until then, I'll continue to use my wireless as it is (or revert to 12.04), but I do notice a slower connection without it enabled.

    Read the article

  • Unable to install Ekundli-2002 with wine1.6

    - by Pandya
    I am running Ubuntu 14.04 and installed wine1.6 (stable). I am trying to install Ekun2002.exe (Astrology software) by wine. But at the end of installation, it is getting following error: Foreign application won't perform DDE method or operation How to solve this ? Further Information: I searched following info from: http://msdn.microsoft.com/en-us/library/aa266013%28v=vs.60%29.aspx An application refused to perform the DDE method or operation you attempted. This error has the following causes and solutions: You supplied data or commands that the other application did not recognize.Check the application's documentation to see what data or commands it recognizes. The LinkItem property isn't set to an item that the other application recognizes as valid for the topic of the conversation. Check the application's documentation to see what items it recognizes.

    Read the article

  • Windows Server 2008 in KVM

    - by Joseph
    I've been working on getting a Windows Server 2008 KVM in my linux box running Ubuntu Server 12.04. I've got virt-install and virt-manager installed, got the install up and running via virt-install --connect qemu:///system -n winsvr2008 -r 1024 --vcpus=1 --disk path=/home/pwnd/vm/2008.img,size=30 -c /home/pwnd/en_windows_server_2008_with_sp2_x86_dvd_342333.iso --graphics vnc,listen=192.168.1.127 --noautoconsole --os-type=windows --os-variant=win2k8 --network=bridge:virbr0 --hvm -v and virsh vncdisplay winsvr2008 I can connect and view, but upon starting, I get hung up on please wait right after clicking Install. Any ideas?

    Read the article

  • disable shutdown/suspend if there is other user logged in via ssh

    - by Denwerko
    I remember that in versions of ubuntu around 9.04 was possible to disable user to shutdown ( and maybe suspend too ) system if there was other user logged in.Something like policykit or similar. Is it possible to do in 11.04 ? Thanks edit: if someone needs ( for own risk ), little change in /usr/lib/pm-utils/bin/pm-action will allow user to suspend machine if he is only user logged in or when user will run sudo pm-suspend. Probably not best piece of code, but for now works. diff -r 805887c5c0f6 pm-action --- a/pm-action Wed Jun 29 23:32:01 2011 +0200 +++ b/pm-action Wed Jun 29 23:37:23 2011 +0200 @@ -47,6 +47,14 @@ exit 1 fi +if [ "$(id -u )" == 0 -o `w -h | cut -f 1 -d " " | sort | uniq | wc -l` -eq 1 ]; then + echo "either youre root or root isnt here and youre only user, continuing" 1&2 + else + echo "Not suspending, root is here or there is more users" 1&2 + exit 2 + fi + + remove_suspend_lock() { release_lock "${STASHNAME}.lock" Question still stands, is it possible to forbid shutdown or suspend when there is more than one user logged in ( without rewriting system file )?

    Read the article

  • How can I get my ATI / AMD drivers to work with any kernel above 3.2.0.x?

    - by TorakTu
    How can I get my ATI / AMD drivers to work with any kernel above 3.2.0.x ? WHAT DID WORK Installed original AMD64 version of Ubuntu 12.04 ISO image. Burned DVD and installed which shown kernel 3.2.0-23 to begin with. Got 5.1 surround sound working. Got ATI ( Now its AMD ) video drivers installed for my Radeon HD R6870 Video card from AMD's website. fglrxinfo came up and reported as normal. THE PROBLEM Kernel 3.2.0.x kept locking up so I tried higher kernel versions. But ATI / AMD Drivers do not install on any kernel Above 3.2.0.x WHAT I HAVE TRIED I have gone over this tutorial many times ( https://help.ubuntu.com/community/BinaryDriverHowto/ATI ) and it doesn't work on ANY kernel except 3.2.0.x. The problems I am having here are that the ATI / AMD drivers working for the 12.04 Precise with kernel 3.2.0-23 and 24, But the computer kept locking up. Although all my games would work, the lock ups were random and were constant. So I looked all over the web for 3 days trying to find an answer and the lock up issue was said to just update the kernel. So I did. Have tried many kernels. All of them .. no lock ups. BUT the Restricted AMD drivers from the AMD website will not install. And none of the OpenSource AMD drivers have EVER installed no matter what Kernel or version I tried. EXAMPLE OUTPUT OF 3D TYPE OF ERRORS Javax.media.opengl.GLException: glXGetConfig failed: error code GLX_NO_EXTENSION at com.sun.opengl.impl.x11.X11GLDrawableFactory.glXGetConfig(X11GLDrawableFactory.java:651) at com.sun.opengl.impl.x11.X11GLDrawableFactory.xvi2GLCapabilities(X11GLDrawableFactory.java:350) at com.sun.opengl.impl.x11.X11GLDrawableFactory.chooseGraphicsConfiguration(X11GLDrawableFactory.java:174) at javax.media.opengl.GLCanvas.chooseGraphicsConfiguration(GLCanvas.java:520) at javax.media.opengl.GLCanvas.<init>(GLCanvas.java:131) at haven.HavenPanel.<init>(HavenPanel.java:68) at haven.HavenPanel.<init>(HavenPanel.java:78) at haven.MainFrame.<init>(MainFrame.java:182) at haven.MainFrame.main2(MainFrame.java:306) at haven.MainFrame.access$100(MainFrame.java:34) at haven.MainFrame$7.run(MainFrame.java:360) at java.lang.Thread.run(Thread.java:722) And of course this is what fglrxinfo shows : X Error of failed request: BadRequest (invalid request code or no such operation) Major opcode of failed request: 139 (ATIFGLEXTENSION) Minor opcode of failed request: 66 () Serial number of failed request: 13 Current serial number in output stream: 13 EDIT : I forgot to mention that I DID look at this post over the last few days and it did not help.

    Read the article

  • How to correctly create a virtual file system?

    - by Paul
    A task in my homework assignment asks me to create a virtual file system, mount it, and perform some operations on it. I am supposed to create a file of 10 MB whose bits are all set to 0, format it as ext3 and mount it. This is how I've done that: dd if=/dev/zero of=~/filesyst bs=10485760 count=1 sudo mkfs.ext3 ~/filesyst sudo mount –o loop ~/filesyst /media/fuse Even though I've used /dev/sero, the file i still full of gibberish characters (mostly at-signs). The permissions on /media/fuse are drw-rw-rw- (which are alright), but the permissions on the files inside it are something like this: d????????? ? ? ? ? ? lost+found -????????? ? ? ? ? ? secret_bin Where have I gone wrong?

    Read the article

  • Err http://extras.ubuntu.com precise Release.gpg

    - by bell
    updating gives the ff: Ign cdrom://Ubuntu 11.10 _Oneiric Ocelot_ - Release amd64 (20111012) oneiric InRelease Ign cdrom://Ubuntu 11.10 _Oneiric Ocelot_ - Release amd64 (20111012) dists/oneiric/main/binary- / InRelease Ign cdrom://Ubuntu 11.10 _Oneiric Ocelot_ - Release amd64 (20111012) dists/oneir Err http://archive.canonical.com oneiric Release.gpg Unable to connect to archive.canonical.com:http Err http://security.ubuntu.com precise-security/universe Translation-en_US Unable to connect to security.ubuntu.com:http:

    Read the article

  • Install matlab with wine

    - by user33831
    I have been moving from windows to ubuntu recently. I have both windows 7 and matlab for windows license keys. My question is, is it possible to use wine to install matlab(for windows)? will the performance of matlab being affected? Except wine, dual-boot, and purchase a new matlab for linux license key, what other options do I have? Thanks for help Update: I just searched for virtual box, will it be a good alternative? Update: After trying with virtualbox, I believe it will not be a good option, because it only run with the ram allocated for it. Seems like I can only purchase a new license, if I dont want to dual-boot, which is quite not convenient. Thanks for all replies.

    Read the article

  • How to use a zenity progress bar with cclive

    - by Winael
    I tried to use a zenity progress bar with cclive. I'm writting a script to download web videos files and I wanna see the progression of the download. But when I try something like $cclive <url> 2>&1 | zenity --progress But when I execute the command line but it not seems to work. Any idea of how I can do that ? BR, [Edit] cclive have this kind of output : cclive http://www.youtube.com/watch?v=youtubevideo Checking ... .......... ..........done. youtubevideo.flv 2.5M 75.8K/s 00:09:29 5% So I need to send the last part to sdout but I dont know how. Else and about pulsate, we can't see th progression with this option, and I really need it... So I will not using pulsate for this script.

    Read the article

  • Login screen theme and background lost

    - by Sebastian Potasiak
    I tried to change my LightDM background and theme in Ubuntu 12.04 LTS beta 2, changing /usr/share/glib-2.0/schemas/com.canonical.unity-greeter.gschema.xml file (I don't even know if it would work, but I couldn't find any other way), and I failed and restored original file. Also, durning the same session I installed gnome-shell-extensions package, but it didn't work either. (I didn't remove it) Now my login screen looks a bit coarse, without theme and background. (It looks like MS Windows 95 a bit - square buttons and text fields) My question is, how to repair login screen (or how to customize it propely) and how to make gnome-shell-extensions work.

    Read the article

  • Why is my card Unity blacklisted with all the requirements fulfilled?

    - by Oxwivi
    The following is the Unity test output: OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce FX 5500/AGP/SSE2 OpenGL version string: 2.1.2 NVIDIA 173.14.30 Not software rendered: yes Not blacklisted: no GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity supported: no As you can see, all requirements are fulfilled but my GPU is blacklisted. What can I do about it?

    Read the article

  • Grub rescue after installing Ubuntu from USB

    - by Victor Suarez
    I have Windows 7 installed in my internal HDD and wanted to try out Ubuntu so I have an USB to put Ubuntu LiveUSB on and installed Ubuntu on a external HDD and everything worked out fine. Now the problem. If I remove the external HDD and try to boot Windows normally it shows the grub rescue screen. The only way to boot into Windows is by having the external HDD attached. Is there any way I can make it so I won't have to have the external HDD attached to be able to boot my Windows 7?

    Read the article

  • Disk drive for / not ready on boot after upgrade from 10.04 to 12.04

    - by Mathieu M-Gosselin
    After upgrading (using the Upgrade button from the update manager) from 10.04.4 to 12.04.1, I cannot boot anymore. Upon booting, I am greeted with the Ubuntu logo and the error "The disk drive for / is not ready yet or not present". I have the option to wait, to skip and to access a basic shell. Waiting overnight did nothing, skipping just gives me the same error for /tmp, /home, then for a UUID and finally it just goes to a black screen with a white "_" in the top left corner. My setup is a dual boot one with XP on a single hard drive, I use separate partitions for / and /home. Back in the day I installed 8.04 directly from the CD while leaving a partition for XP, which I installed after. This setup had never caused any such issues, even when upgrading from 8.04 to 10.04. I have done plenty of research regarding this issue, as many others seem to have had similar issues after doing the same upgrade as me. However, while for most what fixed the problem was running: apt-get -f install after remounting / in read-write, it didn't do it for me. I got dependency errors (see here), which I also investigated. I found https://bugs.launchpad.net/ubuntu/+source/python-defaults/+bug/990740 where most people say the solution that worked is (prior to running the above command) running: apt-get install -o APT::Immediate-Configure=false -f apt python-minimal but that also got me a lot of dependencies errors as output (see here), similar to #34 in the above thread. I also read that running: dpkg --configure -a could help, at first it wouldn't run because it had trouble parsing /var/lib/dpkg/status since there was an extra blank line in a package description (see https://bugs.launchpad.net/ubuntu/+source/dpkg/+bug/916799) but I removed it using vim (and then reran the command). It still gives me output that looks like an error, though. Here it is: http://paste.ubuntu.com/1338074/. I also tried re-running the above apt-get commands after that, to no avail. I'm running out of things to try in the hope of getting this fixed, your help would be very much appreciated! Thank you in advance.

    Read the article

  • 12.10 Wireless hotspot configuration and internet browsing - question

    - by Indian
    In our campus we have a leased line connection from a service provider, which has an external IP W.X.Y.Z. This connection is distributed from the server several sub-networks / subnets as follows: Faculty: 172.33....../ 255.255.0.0 Administration: 172.34......./255.255.255.0 Students: 172.35...../255.255.216.0 A student has a laptop with a fixed IP address 172.35.23.123 / 255.255.216.0 where the IP address is on the ethernet port. The gateways for internet access are 172.31.1.1 and 172.31.1.2. Further the student has a wireless port which is inaccessible in the hostel area. The OS of the student is Ubuntu 12.10. The student in the possession of an android phone on which he wishes to install specific software and therefore wishes to activate the internet therein. The student has already attempted the Wireless hotspot solution which works for 12.04 but has not been successful. Various instructions on the internet have helped the student to do the following Installation of dhcp server and hostapd: sudo apt-get install isc-dhcp-server sudo apt-get install hostapd File: /etc/network/interfaces auto lo iface lo inet loopback auto wlan0 iface wlan0 inet static address 10.10.0.1 netmask 255.255.255.0 dns-nameservers 172.31.1.1 172.31.1.2 File: /etc/dhcp/dhcpd.conf subnet 10.10.0.0 netmask 255.255.255.0 { range 10.10.0.2 10.10.0.4; option routers 10.10.0.1; option domain-name-servers 172.31.1.1 172.31.1.2; default-lease-time 6000; max-lease-time 72000; } File: /etc/hostapd/hostapd.conf interface=wlan0 driver=nl80211 ssid=my_hotspot channel=1 hw_mode=g auth_algs=1 wpa=3 wpa_passphrase=1234567890 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP CCMP rsn_pairwise=CCMP File: /etc/default/hostapd RUN_DAEMON=”yes” DAEMON_CONF=”/etc/hostapd/hostapd.conf” DAEMON_OPTS=”-dd” File: /etc/default/isc-dhcp-server INTERFACES=”wlan0” File: /etc/rc.local iptables -t nat -A POSTROUTING -s 10.10.0.0/16 -o eth0 -j MASQUERADE exit 0 After all the configuration, the computer is restarted. The student can see that the hotspot named “my_hotspot” is available. The hotspot also awards an address to the android phone. The student will now be able to browse the internet.

    Read the article

  • Monitor displays "No VGA signal" "Check DVI cable" after installing motherboard drivers

    - by user1604220
    I bought computer with all of the needed parts, got everything sorted out, installed windows 7 but my CD-ROM doesn't fit my motherboard. So I had to download the driver manually and install it using USB disc. My motherboard: ECS elitegroup H61H2-M2, I downloaded it's drivers, installed the BIOS map or something, and then the computer forced a reboot after it was complete, after the reboot my monitor just stopped working and displayed No VGA signal, No DVI cable I think I've just installed the wrong driver, well but how can I sort it out? This is the driver I installed. On the book, it tells me to install the drivers, without the driver it won't see the Internet connection cable. I'm 100% sure there is nothing wrong with the monitor or it's cables. it stopped working exactly after the reboot after the installation.

    Read the article

  • Ubuntu 10.10 not recognizing external hard drive

    - by sr71
    Installed Ubuntu 10.10 on a hard drive by itself (no windows). All updates are up to date. Everything`works fine except when I plug in a 320 gig Toshiba external hard drive....it is not recognized. When I plug in an 8 gig flash drive it is recognized no problem. What do I mean by "not recognized"? I mean: how do you know it was not recognized. You can check the command "cat /proc/partitions" in a terminal with and without the hdd attached. If you see some difference, it's ok. If the difference is something like "sda1" (sd+letter+number) then you have partition on it, maybe it can't be handled in Ubuntu (no filesystem on it or so). If there is only "sda" in the difference for example (sd+letter, but no number after it) then the drive itself is detected, just no partition is created on it. Also you can check out the messages of the kernel, with the "dmesg" command in the terminal. If there is no disk/partition/anything in /proc/partitions, there can be an USB level problem, you can issue command "lsusb" as it was suggested before my answer. It's really matter of what do you mean about "not recognized". @Marco Ceppi @Oli @Pitto By "not recognized" I meant that when I plug in a 8 gig flash drive an icon immediately appears on the desktop imdicating that there is a flash drive plugged in and I can click on it and view the files on the flash drive. It also shows up on the "Nautilus" default file manager. When I plug in the 320 gig Toshiba external hard drive, I get no indication on the desktop or the file manager (thus "not recogized"). When I run the command "cat/proc/partitions/" I get an error message Could not open location 'file:///home/bob/cat/proc/partitions' with or without the external hard drive installed. With the "dmeg" command I get about 10 pages of info with no mention of disk/partition/anything in /proc/partitions. When I run "lsub" command I get the following: bob@bob-desktop:~$ lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 003: ID 04b3:3003 IBM Corp. Rapid Access III Keyboard Bus 003 Device 002: ID 04b3:3004 IBM Corp. Media Access Pro Keyboard Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub bob@bob-desktop:~$

    Read the article

  • Ubuntu 10.10 netbook Screen Resolution Sony Vaio FS315

    - by Fatos
    Hello, I've just installed ubuntu 10.10 on my laptop its all great but the screen resolution is a bit crap i have it set 1200:800 and when i do xrandr it indicates that the i can have a bigger screen resolution but i dont seem to to be able to increase it more 1200:800 through monitor tool. another interesting thing is that xorg.conf does not exist on the /etc/X11/ is there a way to increase the screen resolution for Sony laptops? The graphics card is Intel Graphics Please help! I didnt think it would be so hard to change the screen resolution

    Read the article

  • Ubuntu won't boot and it is stuck on the loading screen

    - by Jordan March
    I had just installed it as dual boot 2 days ago, and everything was fine. I was installing some programs (i think it was Play On Linux) and I don't think the install was 100% done when the battery died. Since then it won't boot into Ubuntu; it just stays at the loading screen. I did make separate partitions for boot root home and swap. Can anyone help me get it back and running again? Even if I have to reinstall it. I just don't want to go back through getting all those apps. I'm running Ubuntu 12.10 64bit on a Acer Aspire 5750 core i3 cpu 4gb ram

    Read the article

  • How I can Install csh as a non-root user?

    - by user288566
    Hi I need csh for installing a package but I am not root user... I want to install it for my user. I installed csh_20070713.orig.tar.gz, csh_20070713.diff.gz and csh_20070713-2ubuntu1.dsc But there is not dpkg-source command... then I did following procedure: untar *.tar.gz mv csh_20070713.orig csh_20070713 mkdir csh_20070713/debian gunzip csh_20070713.diff.gz patch -p0 < csh_20070713.diff chmod +x csh_20070713/debian/rules but I do not know what should I do next! I used make and make install command in csh_20070713 directory and also debian directory but nothing happened... Plz help me... Thanks

    Read the article

  • How To Upgrade Wine from 1.2 to 1.5 in Maverick 10.10

    - by Subhash
    I am using Maverick Meerkat (10.10). It has Wine 1.2. I followed the instructions at WinHQ for updating wine. In Synaptic Package Manager, the highest version I get now for upgrading is 1.3, not 1.5. How can I get upgrade to Wine 1.5? I do not want to upgrade the Ubuntu version. It seems that some of the supporting libraries such as lib6 are old. I would like to know how I can update them so as to make Wine 1.5 available.

    Read the article

  • How do I access and enable more icons to be in the system tray?

    - by Jon
    So I'm messing around with Natty a little, and I noticed that all the apps that would normally use the system tray (or "notification area"?) aren't displaying there. Is that a bug, or is that the way it's going to be? I heard something about Ubuntu getting rid of that feature entirely. Is there a way to add it back? I mean, I didn't really like it, either, especially when there were apps that used it unnecessarily, but I can't use CryptKeeper at all now, or easycrypt, and I don't know whether Dropbox has synced without opening Nautilus.

    Read the article

  • What do I select for "GRUB install devices" after an update?

    - by jgbelacqua
    After running Update Manager, a debconf window (titled "Configuring grub-pc"), popped up, requiring me to select the appropriateGRUB install devices for my system. I've made no changes to grub or the filesystem recently, and I don't remember what options I selected last time I did make a change. How do I know what to select? I'm assuming the wrong answer could render my system unable to boot. Here's the debconf dialog: Here's the window and text that is displayed when selecting "help" :

    Read the article

  • unmet dependencies updating Intel graphics driver

    - by Nick Jacobs
    I am trying to update my graphics driver by running: sudo apt-get install xserver-xorg-video-intel But I keep getting this message: Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: xserver-xorg-video-intel : Depends: xorg-video-abi-11 E: Unable to correct problems, you have held broken packages. When I run: sudo apt-get install -f Nothing happens, because the program doesn't even get half way to installing. I am running Lubuntu 12.04 on a HP Mini 110 netbook. I have tried changing to several different ppa's but that doesn't work. I want to update my driver so that my mouse stops flickering and ScummVM stops flickering every minute.

    Read the article

  • ifconfig not showing all IPs bound to the machine

    - by pankaj sharma
    I have configured multiple IP addresses on a ubuntu box, but when I run ifconfig it shows just one of them. I am able, however, to ping all other adresses assigned to this machine. /etc/network/interface contents: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.202.11 netmask 255.255.255.0 network 192.168.202.0 broadcast 192.168.202.255 gateway 192.168.202.1 # dns-* options are implemented by the resolvconf package, if installed dns-search idil.dz1.da auto eth0:1 iface eth0:1 inet static address 192.168.202.12 netmask 255.255.255.0 auto eth0:2 iface eth0:2 inet static address 192.168.202.13 netmask 255.255.255.0 auto eth0:3 iface eth0:3 inet static address 192.168.202.14 netmask 255.255.255.0 auto eth0:4 iface eth0:4 inet static address 192.168.202.15 netmask 255.255.255.0 auto eth0:5 iface eth0:5 inet static address 192.168.202.16 netmask 255.255.255.0 but the output of the ifconfig is only: 192.168.202.11

    Read the article

< Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >