Search Results

Search found 27649 results on 1106 pages for 'ask how to geek'.

Page 404/1106 | < Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >

  • How reliable is the battery data in ubuntu the power statistics?

    - by nbubis
    Right now the power statistics show that: Energy when full: 25.5 Wh Energy (design): 93.2 Wh And indeed the battery doesn't seem to be lasting as long as it used too. My question: Is this data reliable? Does it really indicate that I should replace the battery, or could it be the charger, laptop, or OS that is stopping the battery from fully charging? Is any way of validating the battery is indeed to blame? I'd like to be sure before shelling out 90$ for a new battery. (If it helps, the battery is a 3 year old dell 9 cell rated at 90 Wh).

    Read the article

  • How to add user to other filesystem

    - by chris varnz
    I'm trying to work out how to add a user to a separate filesystem, as described here, specifically point 5: Add a local user and password for the user, then add the user to the adm and sudo groups. I've read around chroot, but I don't believe this will work as the default command to run is /bin/bash, which would require the target fs to be binary compatible. In this case, the target fs is armel so isn't compatible.

    Read the article

  • Screensaver + lock double login problem after Maverick upgrade

    - by dr Hannibal Lecter
    Just found something strange after updating from 10.04 to 10.10. I've set up my screensaver to lock the account when activated. When I log back in, I see my desktop for a second and then the screensaver starts again and I have to re-login. I checked my process list in gnome system monitor, and I have two gnome-screensaver processes(!?), one started as /usr/bin/gnome-screensaver and other simply as gnome-screensaver. And no, I did not start one manually. Where do I look for a way to switch off one of those (supposing that's the problem)? I did not find anything in my startup applications.

    Read the article

  • An application asks to unlock the keyring on startup, but it doesn't say which one

    - by Idan K
    A couple of weeks ago a popup has appeared whenever I startup telling me that an application wants to access the keyring but it doesn't say which one. I'm used to seeing the application name on the popup but here it just says 'application'. I haven't changed any passwords or did anything that might have something to do with that, to my knowledge. I saw this question but like I said, I haven't changed any of my passwords, and I don't want my keyring password to be empty. How can I find out which application is asking to unlock to keyring and fix it?

    Read the article

  • How to list user installed applications (not packages)?

    - by Bucic
    Not packages and not all applications. Just the applications user installed by himself from whatever source (Software Center, manually added PPA, etc.). If the above is not possible - a list of all installed applications or at least a GUI which lists the applications so I can take screenshots of it. I've read a dozen of similar questions and people posting answers usually don't even get close to OP question merit. Please note that my question includes 'user installed'. Answer: It is not currently possible in Ubuntu Linux. (choosing tijybba's answer as the closest one though)

    Read the article

  • Managing Kindle Fire with on 12.04 via Micro-USB

    - by pirtle
    To begin, I have read both Is there a way to get a Kindle Fire to work with 12.04? and How can I transfer files to a Kindle Fire with a Micro-USB cable? My problem is that I am unable to mount my Kindle Fire in order to add books to it. I have installed calibre, but it is unable to manage any devices until the computer itself has recognized it. The latter post had an excellent answer (provided by @jeremiah) that was making some progress. Unfortunately, I think I don't know enough about the -t flag used with mount. This is what I've done... Ran dmesg to locate the device: [ 3.920886] sd 6:0:0:0: [sdb] Attached SCSI removable disk Confirmed it's location: $ sudo ls -l /dev/disk/by-id lrwxrwxrwx 1 root root 9 Aug 18 15:52 usb-Amazon_Kindle_3C6C002600000001-0:0 -> ../../sdb So we know that my Kindle is recognized on /dev/sdb. I then used the mount command suggested by @jeremiah: $ sudo mount -t ext3 /dev/sdb/ /mnt/kindle/ mount: no medium found on /dev/sdb The same error occurs for sudo mount /dev/sdb /mnt/kindle. Note: I have created the 'kindle' directory in 'mnt' Any suggestions?

    Read the article

  • Getting vga_switcheroo with ATI Mobility Radeon 5650 HD to work

    - by stevejb
    Hello! I have a new HP dv7 laptop with ATI Mobility Radeon HD 5650 graphics card, and also Intel graphics (switchable). I have done the following and want to understand what is going on with my graphics driver Resized windows 7 and did fresh install of 10.10 Booted into 10.10 and things seemed to be working okay Enabled ATI graphics, and was clearly working on the ATI rather than Intel GPU (desktop cube worked) Rebooted, got an error that modprobe could not load modules.dep, and also something about i915 symbols Rebooted into recovery mode, modified xorg.conf to remove the mention of fglrx Rebooted, and the errors show, but then x starts but clearly in intel graphics I would ideally like to be able to switch between the ATI and Intel graphics, a la vga_switcheroo. My first problem seems to be that the folder /sys/kernel/debug/vgaswitcheroo does not exist, hinting at some kind of kernel issue. What can I do to get this available? Thanks!

    Read the article

  • How do I turn off the onscreen keyboard on the lock screen?

    - by Patrick Marchwiak
    The lock screen has an on screen keyboard that I am unable to disable. I don't remember exactly but I believe I turned it on using the "Screen Keyboard" setting in the Universal Access settings. I've tried a number of things all with no effect: Toggling "Screen Keyboard" in Universal Access Toggling "Onscreen keyboard" in the login screen (LightDM) Clicking on the "x" in the upper right corner of the keyboard

    Read the article

  • Flexible Keyboard starts too late

    - by user289237
    So I just managed to revive an old Windows XP machine that I am getting ready to format into Ubuntu 14.04. However the USB keyboard I have plugged in, powers down with the machine (obviously) but doesn't power up until the Windows loading screen (After my only chance to select boot device, for which I have a USB) It is really frustrating as this renders the f12 key useless and me stuck with a decade + 2 old machine. Thanks for any help :D

    Read the article

  • partitioning in ubuntu with gparted cant resize

    - by user288830
    I opened gparted and as i can see i have 3 partitions(or i think so) first one sda1 (236 mb) its ext2 type file and its booting point, second one is sda2(rest of the hdd 1.36 tb) extended ntfs type file and i have third one that is within the sda2 called sda5 it takes the same space as sda 2 and its file type is crypt luks, so when i try to resize the sda2 i cant resize it not for even 1 mb, i dont know if that crypt luks file is causing the problem, so i dont know what to do, by the way i can format the crypt luks(sda5) file that in inside sda 2 but i dont know if i should.Can anyone help me please? here are the pictures when i open gparted when i try to resize sda 2 i think i did use encryption i mean while it is booting i type password and its says sda5/scrypt set up succefully or something like that and then it goes to my login screen where i type username and pass that is it

    Read the article

  • Ubuntu cant load sound cart

    - by Reza Marefaty
    I have installed Ubuntu 12 and i cant see any volume controller on it and so no audio player can detect any sound card and nothing shown in system setting - sound - output tab. but i can see my hard ware by typing this command : aplay -l Return : List of PLAYBACK Hardware Devices ** card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: U0x4d90x20 [USB Device 0x4d9:0x20], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 How can i activate sound ? Edit : This info may helep for the solution : sudo lspci | grep Audio 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) 04:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Cedar HDMI Audio [Radeon HD 5400/6300 Series]

    Read the article

  • Acer Aspire One 725 - missing graphic card driver for Radeon HD 7290?

    - by Melon
    Recently I bought an Acer Aspire One 725 Netbook and installed Ubuntu 12.10 on it. I bought it, because it can run HD movies and has Full HD on external VGA port. However, movies from youtube have a really slow framerate. If you open three tabs in Opera (for example g-mail, youtube and askubuntu) it gets really laggy. My suspicion is that the driver for graphic card is missing. When I check the System->Details->Graphics the driver is unknown. After running lspci | grep VGA I get this output: 00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 980a From what I see, I have a AMD C70 processor integrated with AMD Radeon HD 7290. Has anyone had the same problem? Do you know which drivers need to be installed for the graphics to work properly? On official Acer page there are only drivers for Win7 and Win8... Update: OK. Another attempt. I have a fresh Ubuntu 12.10. All updates done. downloaded Catalyst 12.11 beta drivers and decided to create a package. After installing package, I have this error from /var/log/Xorg.0.log: [ 13.394] (**) fglrx(0): NoAccel = NO [ 13.394] (**) fglrx(0): AMD 2D Acceleration Architecture enabled [ 13.394] (--) fglrx(0): Chipset: "AMD Radeon HD 7290 Graphics" (Chipset = 0x980a) [ 13.394] (--) fglrx(0): (PciSubVendor = 0x1025, PciSubDevice = 0x0740) [ 13.394] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD [ 13.394] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000 [ 13.394] (--) fglrx(0): MMIO registers at 0xf0200000 [ 13.394] (--) fglrx(0): I/O port at 0x00003000 [ 13.394] (==) fglrx(0): ROM-BIOS at 0x000c0000 [ 13.484] (II) fglrx(0): ATIF platform detected [ 13.564] (II) fglrx(0): AC Adapter is used [ 13.565] (EE) fglrx(0): V_BIOS address 0xd00 out of range [ 13.565] (EE) fglrx(0): Failed to obtain VBIOS from Kernel! [ 13.565] (EE) fglrx(0): VBIOS read from Kernel, Invalid signature! [ 13.565] (EE) fglrx(0): GetBIOSParameter failed [ 13.565] (EE) fglrx(0): PreInitAdapter failed [ 13.565] (EE) fglrx(0): PreInit failed [ 13.565] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === end

    Read the article

  • Will Ubuntu 12.04 work on an Acer Aspire One D257-1682?

    - by Avid
    Is it possible to install Ubuntu 12.04 on an Acer Aspire One D257-1682? I have a disc that I used to run Ubuntu 12.04 on my desktop without incident. When trying to run it on my Aspire One, using an external DVD drive via USB, I get a ton of errors about missing files while it tries to load Ubuntu. I found a list of which versions of Ubuntu to run depending on which Aspire One model you have, but the D257 was not listed at all. I want to have Ubuntu on my Aspire One for coding Java and C++ since I don't have to sit at my desk for hours. Please help! -Avid

    Read the article

  • Getting the Dell XPS 16 Synaptics touchpad to work after hibernation in Ubuntu.

    - by Aron Rotteveel
    I am currently experimenting with using Ubuntu as a my main OS instead of Windows 7. So far, pretty much everything is working fine, except for an issue that I am having with my touchpad. I have a Dell XPS 16 (1640) with a Synaptics touchpad. It works out of the box, but it seems that it stops working after returning from hibernation mode. This problem has also been addressed in an earlier bug, but judging from this bugreport, it should be fixed by now. I am running the 2.6.35-23-generic-pae kernel. Any ideas?

    Read the article

  • ATI graphics card, with gnome shell on Ubuntu 11.10, screen flickers

    - by bioShark
    After installing gnome shell, without any problem, after log in the fonts are missing and it looks like crap...nothing is readable. Don't want to make it a double post, because my issue is similar to the one from this question but for me the problems have not been solved properly. After running the commands from that post, and installing the latest AMD 11.10 driver, the Gnome shell display issues have been solved. But each time I move the mouse in the upper left corner, to bring up the applications...my entire screen flickers. Without the applications been displayed, everything looks fine. Hardware: ATI HD4870, Intel Q6600.

    Read the article

  • How can I switch user in a shell and use the existing gnome display session?

    - by z7sg
    If I switch user in a terminal. su bob I can't open gedit because bob doesn't own the display. If I execute xhost + before switching to bob I can open the display for some applications but not all. I get the following output when trying to execute gedit: (crashreporter:4415): GnomeUI-WARNING *: While connecting to session manager: None of the authentication protocols specified are supported. * GLib-GIO:ERROR:/build/buildd/glib2.0-2.28.6/./gio/gdbusconnection.c:2279:initable_init: assertion failed: (connection-initialization_error == NULL)

    Read the article

  • Yoga Pro 2 Wi-Fi not working

    - by user293004
    I installed Ubuntu 14.04 on my new Yoga Pro 2 and the wireless is not working. It started with Windows 8 on it. The Network Manager says Wi-Fi is disabled by hardware switch. I tried putting a blacklist file in ect/modprobe.d as has been suggested in many places. I called the file "blacklist-ideapad_laptop.conf" and wrote in the file blacklist ideapad_laptop I checked to make sure that the wireless is enabled in the BIOS. It is. I ran rfkill list all and it displayed: 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: yes I ran iwlist wlan0 scan and it displayed: wlan0 Failed to read scan data : Network is down I ran sudo rmmod ideapad_laptop and it displayed: rmmod: ERROR: Module ideapad_laptop is not currently loaded. I ran ifconfig wlp1s0 up and it displayed: wlp1s0: ERROR while getting interface flags: No such device. I ran "lspci" and it displayed: 01:00.0 Network controller: Intel Corporation Wireless 7260 (rev 6b) I ran sudo lshw -c network and it displayed: *-network DISABLED description: Wireless interface product: Wireless 7260 vendor: Intel Corporation physical id: 0<br> bus info: pci@0000:01:00:0.0 logical name: wlan0 version: 6b serial: 7c:7a:91:5f:9b:fa width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.13.0-24-generic firmware=22.24.8.0 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:61 memory:b0400000-b0401fff This No wireless with Intel Centrino Advanced-N 7260 seems to be dealing with a similar issue. It suggests that I need to update my firmware. So I downloaded iwlwifi-7260-ucode-23.214.9.0 from Intel's website. I put the file "iwlwifi-7260-9.ucode" in /lib/firmware and ran "sudo lshw -c network" again. It displayed exactly as before. Is there something else I need to do install the new firmware?

    Read the article

  • changing drive nodes & hdparm

    - by Kalamalka Kid
    I am currently attempting to create a command that works at startup to kill the power on two of my very noisy hard drives. I have edited the etc/rc.local file to include this command: sudo hdparm -y /dev/sdc sudo hdparm -y /dev/sdd exit 0 While I think this should work, it seems the allocated drives keep switching around every time I reboot. I have sda, sdb, sdc, sdd, and sde but they keep getting jumbled around (making the drive I wish to shut different than sdd which is making the task of shutting down the right drive on start-up quite cumbersome. I had a perfectly functioning ftstab file working which disappeard, but I restored it from the back up into the etc/ dir: # <file system> <mount point> <type> <options> <dump> <pass> #Entry for /dev/sda1 : UUID=43c09daf-08a5-44f2-89b0-fc7c6f0d1e67 / ext4 errors=remount-ro 0 1 #Entry for /dev/sdd1 : UUID=443AFBAD7FE50945 /media/DX100 ntfs-3g defaults,nosuid,nodev,locale=en_CA.UTF-8 0 0 #Entry for /dev/sdb1 : UUID=FCE456F5E456B21E /media/GalaxyM83 ntfs-3g defaults,nosuid,nodev,locale=en_CA.UTF-8 0 0 #Entry for /dev/sdf1 : UUID=1CA057FDA057DBB8 /media/Holideck ntfs-3g defaults,nosuid,nodev,locale=en_CA.UTF-8 0 0 #Entry for /dev/sdc1 : UUID=7ABB49654B799D40 /media/JX3P ntfs defaults,nosuid,nodev,locale=en_CA.UTF-8 0 0 it seems every time I boot the order of the drives changes. I do not know how to resolve this. A quick workaround the problem was to go with UUID instead of the DEV letter by editing the etc/rc.local file to include: hdparm -y /dev/disk/by-uuid/443AFBAD7FE50945 hdparm -y /dev/disk/by-uuid/7ABB49654B799D40 So I thought I was in the clear, as I heard both hard drives die down during the boot sequence, BUT, as soon as I log in both drives start up again! so now I have to figure out what is making them start up again after log in, or perhaps another way to get them to turn off. Is there some kind of command i can get to execute after log in? I tried editing the startup applications to include an autossh with: autoshh - sudo hdparm -y /dev/disk/by-uuid/7ABB49654B799D40 autoshh - sudo hdparm -y /dev/disk/by-uuid/443AFBAD7FE50945 but this did not seem to work to turn off the disks after log in.

    Read the article

  • Translating to Bash Command

    - by user3424684
    So for a project for school I had to install the DPJ extension to the Java language. I downloaded and unpacked a tarball containing the files, and then was told to run the following: setenv DPJ_ROOT ${Home}/dpjbin setenv PATH ${PATH}:${DPJ_ROOT}/Implementation/bin How do I do these commands using bash? I know I have to open up the /etc/profile file and add 2 lines (or for the PATH one do I just append something to the top line of the file after a colon?). Any help in how to do this would be appreciated. If it helps I run Ubuntu 14.04 on Virtualbox (and have little to no experience)

    Read the article

  • How do i clean up my harddrive?

    - by acidzombie24
    Not to long ago i was using only 35% of my HD. Just recently it shot up to 54% and my diskspace is 16gb so thats more then 3gigs that have been taken. From what i remember i failed to build mysql, i install gitolite which required me to build git from source which had a tons of dependencies (i think it was for building docs, i think i saw latex and other packages but i was drozy when i was installing). I suspect that is what is taking the diskspace. Anyways so far i deleted source folders i know i had and ran these commands. What else can i do? (3gigs is mighty) sudo apt-get autoclean sudo deborphan | xargs sudo apt-get -y remove --purge

    Read the article

  • 12.04 wired network doesn't work RTL8111/8168B

    - by laket
    its a fresh 12.04 install 64bits. wifi works fine, wired stays off with cable connected and network-manager shows as if cable is disconnected. Turning off networking lights up my network-cards leds, turning networking on shuts off the leds and no communication is possible. I already tried, turning off the network-manager (sudo service network-manager stop) and setting up my eth0 manually, as soon as I switch off the network-manager my leds light up, but after setting up manually eth0 (sudo ifconfig eth0 10.2.10.114 netmask 255.255.0.0 up) the leds turn off again. I am still dual booting with 10.04 where I have no issues at all, leaving the cable connected all time to my notebook and a switch. Here is some hardware info: lshw: *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 03 serial: c8:0a:a9:d7:05:97 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168d-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff memory:f0010000-f001ffff lspci: 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) ifconfig eth0: eth0 Link encap:Ethernet HWaddr c8:0a:a9:d7:05:97 inet addr:10.2.10.114 Bcast:10.2.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:42 Base address:0xc000 cat /etc/network/interfaces: (already tried here with and w/o eth0) auto lo eth0 iface lo inet loopback cat /etc/NetworkManager/NetworkManager.conf [main] plugins=ifupdown,keyfile dns=dnsmasq [ifupdown] managed=false Any help is welcome ;) Laket

    Read the article

  • bumblebee does not work with metacity and KWin, but works with compiz

    - by cpu2
    If I try to launch something with optirun under compiz, it works. If I try to launch something with optirun under KDE or metacity, it gives me: [ 247.384077] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) [ 247.384117] [ERROR]Aborting because fallback start is disabled. If it matters, I'm trying to launch Portal 2 with wine I have: Nvidia GeForce GT540M with optimus Acer Aspire Timeline X Intel core i5 and 3000 Integrated Graphics

    Read the article

  • How to get wireless (Alfa) operate in full power and speed up wireless Internet?

    - by MahboobeAlam
    I am using Wireless to connect to the internet (router). My laptop has Atheros wireless (AR 242x/542x) adapter but the router is a little bit far-away from my room so I have to use an external wireless adapter i.e. Alfa (Realtek 8187) for connectivity. However, since I have started using Ubuntu I noticed that Alfa is not working in full power, internet speed in Ubuntu is much slower than in Windows on my laptop. When I am using Windows 7 the LED (bulb) on Alfa blinks as it should, but when in Ubuntu, it doesn't blink rather it is on but very dim. Connection using Atheros adapter is also the same (slow)... I have tried 4 methods (I found on the Internet) to troubleshoot this matter but no success. It seems to me that Ubuntu/Linux is not letting these wireless adapters to operate in full strength. iwconfig shows that power management is off for both. So what's the problem? Details: ifconfig eth0 Link encap:Ethernet HWaddr 00:1f:16:1e:36:ec UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:45 Base address:0x6000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1657 errors:0 dropped:0 overruns:0 frame:0 TX packets:1657 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:241697 (241.6 KB) TX bytes:241697 (241.6 KB) wlan0 Link encap:Ethernet HWaddr 00:22:5f:9b:24:b5 inet6 addr: fe80::222:5fff:fe9b:24b5/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:715460 errors:0 dropped:0 overruns:0 frame:0 TX packets:694246 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:493539292 (493.5 MB) TX bytes:235159393 (235.1 MB) wlan1 Link encap:Ethernet HWaddr 00:c0:ca:42:14:62 inet addr:192.168.100.102 Bcast:192.168.100.255 Mask:255.255.255.0 inet6 addr: fe80::2c0:caff:fe42:1462/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:171053 errors:0 dropped:0 overruns:0 frame:0 TX packets:181363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:74094659 (74.0 MB) TX bytes:59474204 (59.4 MB) iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off wlan1 IEEE 802.11bg ESSID:"Zia" Mode:Managed Frequency:2.412 GHz Access Point: 00:0D:F0:9C:A6:18 Bit Rate=54 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=70/70 Signal level=-31 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:204 Invalid misc:6610 Missed beacon:0

    Read the article

  • TestDrive equivalent for Ubuntu Server

    - by Marius Gedminas
    Every now and then I'd like to play with a fresh minimal install of Ubuntu (to test sysadminish scripts, application install instructions, package dependency lists etc.). I'd like to have a tool as simple to use as testdrive: pick a version (say, 'maverick'), run a command, get a shell in a new virtual machine. I'd like that shell to be in the current terminal, rather than a new GUI window that testdrive uses. Setting up the new VM to accept SSH logins with my ssh public key is fine. I'd like the VM to have network access out of the box; NAT to a virtual network interface is fine. Why a VM? Chroots don't really cut it: installing, say, Apache in a chroot would fail because it would try to listen on port 80, which is already taken. Containers might work, though, if there are any that are supported by standard Ubuntu kernels.

    Read the article

  • Is there a command-line utility app which can find a specific block of lines in a text file, and replace it?

    - by fred.bear
    UPDATE (see end of question) The text "search and replace" utility programs I've seen, seem to only search on a line-by-line basis... Is there a command-line tool which can locate one block of lines (in a text file), and replace it with another block of lines.? For example: Does the test file file contain this exact group of lines: 'Twas brillig, and the slithy toves Did gyre and gimble in the wabe: All mimsy were the borogoves, And the mome raths outgrabe. 'Beware the Jabberwock, my son! The jaws that bite, the claws that catch! Beware the Jubjub bird, and shun The frumious Bandersnatch!' I want this, so that I can replace multiple lines of text in a file and know I'm not overwriting the wrong lines. I would never replace "The Jabberwocky" (Lewis Carroll), but it makes a novel example :) UPDATE: ..(sub-update) My following comment about reasons when not use sed are only in the context of; don't push any tool too far beyond its design intent (I use sed quite often, and consider it to be invaluable.) I just now found an interesting web page about sed and when not to use it. So, because of all the sed answers, I"ll post the link.. it is part of the sed FAQ on sourceforge Also, I'm pretty sure there is some way diff can do the job of locating the block of text (once it's located, the replacement is quite straight foward; using head and tail) ... 'diff' dumps all the necessary data, but I haven't yet worked out how to filter it , ... (I'm still working on it)

    Read the article

< Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >