Search Results

Search found 11973 results on 479 pages for 'ip conflict'.

Page 404/479 | < Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >

• RRAS DNS Entries from Windows Vista / 7 Clients

  - by Christopher

  How do I stop a Win 2003 RRAS server from sending it's own DNS info to the VPN Client? We have RRAS running on Win 2003 Server. The server has a fixed IP, but the RRAS is setup to use DHCP for assigning VPN client IPs. Our DHCP is setup to send 4 DNS server entries in this order: Internal DNS Server Backup Internal DNS Server External DNS Server Backup External DNS Server Here's the thing: the RRAS server seems to automatically send it's own DNS entries (from it's NICs) to the client first, and then the entries from DCHP are applied. But since the RRAS server has Internal DNS and Backup Internal DNS as it's own DNS entries, it sends these first, and when the DCHP DNS entries come down, only the ones not already added get added (just the externals). This results in the following DNS list on the VPN client: External DNS Server Backup External DNS Server Internal DNS Server Backup Internal DNS Server This is no good of course, because internal names will no longer resolve. How do I stop the RRAS server from sending it's own DNS info to the VPN Client? Note this doesn't seem to happen on WinXP - it gets the DNS servers direct from the DHCP in the correct order.

  Read the article

• How to run some commands after booting from ArchLinux disk? Or how to change some settings in .iso before booting?

  - by Alexander Ovchinnikov

  How to install Arch Linux with traditional installer with only ssh-access to server? There is nice guide: https://wiki.archlinux.org/index.php/Install_from_SSH I try test this on my home vps: Start VPS with any linux bootable cd and login to remote server (vps) wget http://mirrors.kernel.org/archlinux/iso/latest/archlinux-2010.05-netinstall-x86_64.iso dd if=archlinux-2010.05-netinstall-x86_64.iso of=/dev/sda reboot ... I see, it works but without ssh connection... I need make script, which will send this commands after reboot: aif -p partial-configure-network (and write some information about my server ip etc.) /etc/rc.d/sshd start (need to start sshd) echo "sshd: ALL" /etc/hosts.allow (to allow me login to server, by default deny all) passwd (by default its empty, can't login via ssh with empty password) Can I edit .iso or may be /dev/sda? May be I need write script, which will start after system boot and do this things or may be I can set this settings by default and system will start with correct settings (i think its possible at least in 2. and 3.). Thank you!

  Read the article

• Last (I think and hope) problems configuring SSL certificate with Apache and VirtualHosts

  - by user65567

  Finally I set apache2 to get a single certificate for all subdomains. [...] # Go ahead and accept connections for these vhosts # from non-SNI clients SSLStrictSNIVHostCheck off # Apache setup which will listen for and accept SSL connections on port 443. Listen 443 # Listen for virtual host requests on all IP addresses NameVirtualHost *:443 # Because this virtual host is defined first, it will # be used as the default if the hostname is not received # in the SSL handshake, e.g. if the browser doesn't support # SNI. <VirtualHost *:443> ServerName domain.localhost DocumentRoot "/Users/<my_user_name>/Sites/domain/public" <Directory "/Users/<my_user_name>/Sites/domain/public"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on ... </VirtualHost> <VirtualHost *:443> ServerName subdomain1.domain.localhost DocumentRoot "/Users/<my_user_name>/Sites/subdomain1/public" <Directory "/Users/<my_user_name>/Sites/subdomain1/public"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on ... </VirtualHost> <VirtualHost *:443> ServerName subdomain2.domain.localhost DocumentRoot "/Users/<my_user_name>/Sites/subdomain2/public" <Directory "/Users/<my_user_name>/Sites/subdomain2/public"> Order allow,deny Allow from all </Directory> # SSL Configuration SSLEngine on ... </VirtualHost> So, for example, I can correctly access https://subdomain1.domain.localhost https://subdomain2.domain.localhost ... Now, anyway, I have problems on accessing http://subdomain1.domain.localhost http://subdomain2.domain.localhost ... Since I use a Mac Os, on accessing the "http: version", I get a default page "Your website." (instead of a error). Why does it happen?

  Read the article

• Problem with PXE boot

  - by user70523

  Hi, I followed the following link for PXE boot, http://www.howtoforge.com/setting-up-a-pxe-install-server-on-ubuntu-9.10-p3 and I was able to ping the client from the server and also when I booted up the client It is getting the IP address from the server. But later,I got this error PXELinux 3.82 2009-06-09 . . . [other informations] !PXE Entry point found (we hope) at 9D3B:0109 via plan A UNDI code segment at 9D3B len 16C2 UNDI data segment at 933B len A000 Getting cached packet 01 02 03 . . . [other informations] TFTP prefix: Trying to load: pxelinux.cfg/ec5db4c0-74fe-d511-b9e7-3d9235afe5a1 Trying to load: pxelinux.cfg/01-00-17-31-b6-5e-a8 Trying to load: pxelinux.cfg/0A64491E Trying to load: pxelinux.cfg/0A64491 Trying to load: pxelinux.cfg/0A6449 Trying to load: pxelinux.cfg/0A644 Trying to load: pxelinux.cfg/0A64 Trying to load: pxelinux.cfg/0A6 Trying to load: pxelinux.cfg/0A Trying to load: pxelinux.cfg/0 Trying to load: pxelinux.cfg/default Unable to locate configuration file Boot failed: press a key to retry or wait for reset I have put all the files mentioned in the link in tftpboot. Can anyone explain what could be the problem. Thanks in advance

  Read the article

• Error with Apache, Nagios and Snorby integration

  - by user1428366

  I'm trying to use apache to serve two different websites (Nagios and Snorby). The problem is that when I try to see the "/snorby" website, apache sends me the "It works" page. If I try to access to "/nagios" it works perfectly. Snorby is running under ruby passenger .This are the config files. <VirtualHost *:80> ScriptAlias /nagios/cgi-bin "/srv/nagios/sbin" <Directory "/srv/nagios/sbin"> # SSLRequireSSL Options ExecCGI AllowOverride None Order allow,deny Allow from all # Order deny,allow # Deny from all # Allow from 127.0.0.1 AuthName "Nagios Access" AuthType Basic AuthUserFile /srv/nagios/etc/htpasswd.users Require valid-user </Directory> Alias /nagios "/srv/nagios/share" <Directory "/srv/nagios/share"> # SSLRequireSSL Options None AllowOverride None Order allow,deny Allow from all # Order deny,allow # Deny from all # Allow from 127.0.0.1 AuthName "Nagios Access" AuthType Basic AuthUserFile /srv/nagios/etc/htpasswd.users Require valid-user </Directory> </VirtualHost> And the other one is this: <VirtualHost *:80> #Alias /snorby "/var/www/snorby-2.6.0/public" # !!! Be sure to point DocumentRoot to 'public'! DocumentRoot /var/www/snorby-2.6.0/public <Directory /var/www/snorby-2.6.0/public> # This relaxes Apache security settings. AllowOverride all # MultiViews must be turned off. Options -MultiViews </Directory> </VirtualHost> If I disable the Nagios webpage, the Snorby webpage works. I think the problem is Snorby because when I try to access to the Ip address with Nagios page disable, the webapplication redirects me to http:// myserverip/dashboard. Can anyone help me please? Thank you so much! Regards

  Read the article

• Configure APE-Server on Ubuntu10.10 webserver

  - by sadmicrowave

  I'm having problems configuring my ape-server. First, I reside behind a corporate firewall where our own DNS servers are maintained. I requested a domain name for my server and was provided uslonsweb003.us.mycompany.com from my IT group. Therefore, my website works and can be accessed via (intranet only) at http://uslonsweb003.us.mycompany.com/test.php. I followed the instructions at ape-project.org and run the Check Tool at the end only to find I get an error stating: Running test : Contacting APE Server (adding frequency) Can't contact APE Server. Please check the folowing url is pointing to your APE server : http://0.uslonsweb003.us.mycompany.com:6969 my /etc/apache2/apache2.conf module looks as follows: <VirtualHost *:80> Servername uslonsweb003.us.mycompany.com ServerAlias ape.uslonsweb003.us.mycompany.com ServerAlias *.ape.uslonsweb003.us.mycompany.com DocumentRoot "/var/www/" </VirtualHost> my /var/www/ape-jsf/Demos/config.js config section looks as follows: APE.Config.baseUrl = 'http://uslonsweb003.us.mycompany.com/ape-jsf'; APE.Config.domain = 'uslonsweb003.us.mycompany.com'; APE.Config.server = 'uslonsweb003.us.mycompany.com:6969'; The instructions at ape-project.org tell me that the APE.Config.server should be `ape.mydomain.com:6969'; but that does not work (I'm assuming because my corporate DNS does not understand the 'ape' before the domain name since 'ape' was not registered with the IT DNS). So therefore, I changed it to what you see above. Please help!! Thanks in advance UPDATE 1 per the installation instructions located on this page http://www.ape-project.org/wiki/index.php/Advanced_APE_configuration under 'Configure your Server/Computer' (I'm running it on a server obviously) It says I need to add some lines to my DNS config file. It sounds like (since I'm within a corporate network) I would ask my IT group to add the following lines to the DNS configuration file on their end: ape IN A x.x.x.x ; IP address of my APE server *.ape IN CNAME ape I just want to make sure this is all I have to have them add (or if this is even correct) before I ask them.

  Read the article

• Hyper V Server 2012 Remote Management Using Workgroup

  - by Chris Kolenko

  I'm trying to remotely manage Hyper V server 2012 from a windows 8 pc, both client and server are on a workgroup. I've spent about 3-4 hours trying to get this working with no luck so far trying the following: Creating a new administrator on the server with the same details as the client ie. username / password. Add an entry into my hosts file to point to the remote ip by server name. Tried using HVRemote. Disabled both firewalls. The error that I'm getting is RPC Service Unavailable. How can I accomplish what I'm trying to do? Update Some of the operations on the Hyper-V Manager work. IE. Virtual Switch Works. I can open the New VM Wizard. I run into an error when creating a new Virtual Hard Disk tho. I've tried creating a VM without a hard disk, which works. Using the new hard disk wizard does not work either. I still can not see any Virtual Machines. RPC server unavailable. Unable to establish communication between 'ServerName' and 'ClientName'

  Read the article

• Getting 400 Bad Request when requesting by server name on nginx/uwsgi

  - by Marc Hughes

  I'm trying to run 2 different sites on nginx via different ports (they each have a load balancer that points to the appropriate port). The first site work perfectly. The second site... If I access http://localhost:81/ it works correctly If I access http://127.0.01:81/ it works correctly If I access the hostname http://THEHOSTNAME:81/ it fails with a 400 error If I access the public IP http://x.x.x.x:81/ it fails with a 400 error I've set the error_log to info, but the only lines I get in the log when this happens is: ==> /var/log/nginx/access.log <== 10.183.38.141 - - [24/Aug/2014:21:03:28 +0000] "GET / HTTP/1.1" 400 37 "-" "curl/7.36.0" "-" ==> /var/log/nginx/error.log <== 2014/08/24 21:03:28 [info] 7029#0: *5 client 10.183.38.141 closed keepalive connection In my uwsgi log, I only see this: [pid: 6870|app: 0|req: 87/92] 10.28.23.224 () {32 vars in 380 bytes} [Sun Aug 24 21:05:21 2014] GET / => generated 26 bytes in 1 msecs (HTTP/1.1 400) 2 headers in 82 bytes (1 switches on core 2) What should be my next step in debugging this?

  Read the article

• Static routing on a TP-Link TL-WR1043ND

  - by igor

  My home network setup looks like this: Both routers are TP-Link TL-WR1043ND routers. The basement router handles all devices in the house that are connected via cable, handing out addresses for the 10.89.49.0/24 network via DHCP. Wireless doesn’t really work from the basement, as the signal is too weak, so I have disabled it. To do WiFi, I have added a second (identical) router downstairs. On the WAN side it is assigned the 10.89.49.101 IP address from the basement router, and on its LAN it provides the 10.89.7.0/24 network. Basic internet access works flawlessly from any device this way. I am now facing the problem that I am not able to communicate (e.g. SSH) between all devices, wired or wireless. I am able to connect from a wireless device to a wired device, for example SSH-ing from 10.89.7.X to 10.89.49.Y, but it doesn’t work the other way round—despite the fact that I have added a static route to the basement router: Does anybody have any idea on how to solve it? Both routers have already been upgraded to use the most recent firmware from TP-Link.com (Build 110429), to no avail. Errata: I would like to stick with the official firmware, switching to something like DD-WRT or OpenWrt only as a last resort.

  Read the article

• SQL Server 2008: Can't connect to remote server via management studio but can telnet in fine

  - by WarpKid

  Hi, I am in the process of trying to configure SQL Server 2008 to accept remote connections. I have been through all the documentation I can find and yet when I attempt to connect through management studio I get an error stating that the server could not be found. Interestingly I can connect through telnet to the remote server via the port that sql server is listening on. In the SQL Server logs I can see the connection attempt. So SQL Server is up and running and listening on the correct port - no firewall blocking it. It would appear that by default SQL Server is listening on port 50314 by default but management studio attempts to connect on port 1433.Weird. Server Management Studio = no dice. Anyone got any ideas? Server is set to allow remote connections - TCP IP is enabled, firewall is off. Thanks UPDATE FOR TO CLEAR THINGS UP A BIT We are seeing the connection attempt when we telnet in on port 50314 in the sql server logs. When we login through management studio we see it attempting connection on port 1433. There is no sign of this connection attempt in the logs.

  Read the article

• SAN Replication for Fault tolerance using EVA4400

  - by Sergei

  Hi Everyone, I hope that someone would point me in the correct direction - it looks like I have no enough konwledge in the subject and timeframes are too tight for me to explore different scenarios in depth.. We have two datacenters few miles away from each other connected by 100 Mbps link.Each datacenter will have 5 BL490 blades with ESX Standard hosting about 50 VMs. Eac hsite has HP eva4400 SAN with SAN replication set up.VC is going to be in the first datacenter and both datacenter are networked. SAN Replication is block level so it seems like I cannot just replicate changes but all writes would have to be replicated.This should not be a problem as link can sustain about 1.8 TB a dayand data can be buffered. I am having trouble however visioning how recovery would work in this case.We don't need instant recovery , I would say 4 hours recovery time is accepted so fancy automatic SRM like DR scenario would not be easily accepted due to the financial reasons, however any comments are welcomed. Current idea is following: replicate LUNs from primary site to the secondary.When disaster strikes, IT personnel switches on ESX hosts on the remote side and connects replicated LUNS to them, then registers VMs and changes IP address. I understand that this seems like horribly manual process and I almost sure I have missed some obvious pitfalls here. Could someone let me know what direction should I go?An articles regarding the subject? This is a brand new setup and we would rather build up basic recovery process and scale it later.I just need to have a right direction to allow for such scalability. Thank you very much in advance!

  Read the article

• Prevent Cisco VPN from interrupting home networking

  - by jkohlhepp

  I just got a new laptop, and for the most part have left its settings alone. Today I was trying to get some sharing going between my desktop and the laptop. Both machines are connected to the same wireless network and both machines consider that network to be a Home network. Both are running Win7 Home Premium. It seems like my laptop is aware of my desktop on the network. It can ping it by IP or by computer name. When I go to Network from the laptop, I can see the desktop in the list of computers. However, my desktop cannot ping the laptop, nor can it see it within Network. My desktop has a Homegroup set up, but my laptop says "There is currently no homegroup on the network". I do have network discovery turned on for both machines. Why can my desktop not "talk" to my laptop but it works the other way around? Update: Disabling the Windows Firewall on the laptop somewhat fixes the problem. With it disabled, my desktop can ping my laptop, but still my laptop can't see the homegroup. Also, it can ping via hostname, which resolves to IPv6, but can't ping via the IPv4 address. Obviously I'd rather not leave my firewall disabled, so I need a more specific fix. Update 2: Aha! It is the Cisco VPN software I was running to connect to work computers. Once I disconnected and exited from that, the two PCs seemed to be talking normally and the homegroup was visible to the laptop. So now my question has morphed: how can I prevent Cisco VPN from interrupting my home networking?

  Read the article

• Plesk wildcard subdomain not working

  - by avdgaag

  I'm trying to set up a wildcard subdomain on my VPS. Ultimately I want to end up with this: main site: my.domain.tld subdomain: sub1.my.domain.tld - should end up serving my.domain.tld/sub1 I am using plesk 8.6. I have created a DNS A record pointing at my VPS' IP. I have then restarted the DNS server and waited up to 24 hours. But trying ping sub1.my.domain.tld results in an unknown host error. So I know there's more stuff involved, configuring apache etc. But so far, I cannot even get the subdomain working at all, let alone serve up the right content. I have also tried a CNAME record, to no effect. I have also tried creating a regular subdomain with a fixed name, which also does not work. Pre-configured subdomains DO work, like ftp.my.domain.tld or mail.my.domain.tld. I am clearly missing something here, but my hosting provider charges a small fortune for any support request not involving hardware physically burning down, so I'm hesitant to ask them. Any ideas?

  Read the article

• Why the system information message when accessing an Ubuntu server doesn't match free -m?

  - by Andres

  Each time I SSH into my AWS Ubuntu servers I see a system information message, showing load, memory usage and packages available to install, like this: Welcome to Ubuntu 12.04.3 LTS (GNU/Linux 3.2.0-51-virtual x86_64) * Documentation: https://help.ubuntu.com/ System information as of Sun Nov 10 18:06:43 EST 2013 System load: 0.08 Processes: 127 Usage of /: 4.9% of 98.43GB Users logged in: 1 Memory usage: 69% IP address for eth0: 10.236.136.233 Swap usage: 100% Graph this data and manage this system at https://landscape.canonical.com/ 13 packages can be updated. 0 updates are security updates. Get cloud support with Ubuntu Advantage Cloud Guest http://www.ubuntu.com/business/services/cloud Use Juju to deploy your cloud instances and workloads. https://juju.ubuntu.com/#cloud-precise *** /dev/xvda1 will be checked for errors at next reboot *** *** System restart required *** My question is about the memory percentage shown. In this case, it's showing a 69% of memory usage, but since the swap usage was 100% I checked it by myself. So when I run free -m I get this: total used free shared buffers cached Mem: 1652 1635 17 0 4 29 -/+ buffers/cache: 1601 51 Swap: 895 895 0 And that's of course closer to 100% than to 69%

  Read the article

• Attempting to update Amazon Route53 using a script, but domain is not being updated

  - by ks78

  I have several Amazon EC2 instances, running Ubuntu 10.04, with which I'd like to use Amazon's Route53. I setup a script as described in Shlomo Swidler's article, but I'm still missing something. When the script runs, it doesn't return any output, which I initially assumed meant it ran correctly. However, when I check the DNS records using MyR53DNS, there are no entries for my instances. Here's my script: #!/bin/tcsh -f set root=`dirname $0` setenv EC2_HOME /usr/lib/ec2-api-tools setenv EC2_CERT /etc/cron.route53/ec2_x509_cert.pem setenv EC2_PRIVATE_KEY /etc/cron.route53/ec2_x509_private.pem setenv AWS_ACCESS_KEY_ID myaccesskeyid setenv AWS_SECRET_ACCESS_KEY mysecretaccesskey /user/bin/ec2-describe-instances | \ perl -ne '/^INSTANCE\s+(i-\S+).*?(\S+\.amazonaws\.com)/ \ and do { $dns = $2; print "$1 $dns\n" }; /^TAG.+\sShortName\s+(\S+)/ \ and print "$1 $dns\n"' | \ perl -ane 'print "$F[0] CNAME $F[1] --replace\n"' | \ xargs -n 4 $/etc/cron.route53/cli53/cli53.py \ rrcreate -x 60 mydomain.com Does anyone see a problem with this script? If its not the script, what else could be preventing my Route53 domain from being updated? I am using the Security Groups to IP-restrict the instances. I've tried opening port 53, but that didn't seem to have an effect. Is there another port that Route53 uses? I'd appreciate any help or guidance the ServerFault community can offer. Let me know if you need any further info.

  Read the article

• strange Postfix logwatch log summary on my ubuntu vps

  - by DannyRe

  Hi I would be very thankful if someone could help me on explaining this logwatch summary of my postfix installation on my ubuntu 10.04 vps. I dont really know if this might be a normal log file because of the many authentication failed entries and foreign IP addresses. Any advise for a novice? Thx! ****** Summary ************************************************************************************* 113 SASL authentication failed 195 Miscellaneous warnings 8.419K Bytes accepted 8,621 8.419K Bytes delivered 8,621 ======== ================================================== 3 Accepted 60.00% 2 Rejected 40.00% -------- -------------------------------------------------- 5 Total 100.00% ======== ================================================== 2 5xx Reject relay denied 100.00% -------- -------------------------------------------------- 2 Total 5xx Rejects 100.00% ======== ================================================== 116 Connections 1 Connections lost (inbound) 116 Disconnections 3 Removed from queue 3 Delivered 1 Hostname verification errors ****** Detail (10) ********************************************************************************* 113 SASL authentication failed -------------------------------------------------------------- 113 92.24.80.207 host-92-24-80-207.ppp.as43234.net 113 LOGIN 113 generic failure 195 Miscellaneous warnings ------------------------------------------------------------------ 113 SASL authentication failure: cannot connect to saslauthd server: Permission denied 41 inet_protocols: IPv6 support is disabled: Address family not supported by protocol 41 inet_protocols: configuring for IPv4 support only 2 5xx Reject relay denied ----------------------------------------------------------------- 1 46.242.103.110 unknown 1 [email protected] 1 114.42.142.103 114-42-142-103.dynamic.hinet.net 1 [email protected] 1 Connections lost (inbound) -------------------------------------------------------------- 1 After RCPT 3 Delivered ------------------------------------------------------------------------------- 3 myhost.xx 1 Hostname verification errors ------------------------------------------------------------ 1 Name or service not known 1 46.242.103.110 broadband-46-242-103-110.nationalcablenetworks.ru === Delivery Delays Percentiles ============================================================ 0% 25% 50% 75% 90% 95% 98% 100%

  Read the article

• pfsense 2.0.1 Firewall SMB Share not showing up under network

  - by atrueresistance

  I have a freenas NAS with a SMB share running at 192.168.2.2 of a 192.168.2.0/28 network. Gateway is 192.168.2.1. Originally this was running on a switch with my LAN, but now having upgraded to new hardware the Freenas has it's own port on the firewall. Before the switch the freenas would show up under Network on a windows 7 box and an OSX Lion box as freenas{wins} or CIFS shares on freenas{osx} so I know it doesn't have anything do to with the freenas. Here are my pfsense rules. ID Proto Source Port Destination Port Gateway Queue Schedule Description PASS TCP FREENAS net * LAN net 139 (NetBIOS-SSN) * none cifs lan passthrough PASS TCP FREENAS net * LAN net 389 (LDAP) * none cifs lan passthrough PASS TCP FREENAS net * LAN net 445 (MS DS) * none cifs lan passthrough PASS UDP FREENAS net * LAN net 137 (NetBIOS-NS) * none cifs lan passthrough PASS UDP FREENAS net * LAN net 138 (NetBIOS-DGM) * none cifs lan passthrough BLOCK * FREENAS net * LAN net * * none BLOCK * FREENAS net * OPTZONE net * * none BLOCK * FREENAS net * 192.168.2.1 * * none PASS * FREENAS net * * * * none BLOCK * * * * * * none I can connect if I use \\192.168.2.2 and enter the correct login details. I would just like this to show up on the network. Nothing in the log seems to be blocked when I filter by 192.168.2.2. What port am I missing for SMB to show up under the network and not have to connect by IP? ps. Do I really need the LDAP rule?

  Read the article

• Solaris 10 invalid ARP requests from 0.0.0.0?

  - by JWD

  The guys at the data center where I'm hosting a server running Solaris 10 are telling me that my server is making a lot of invalid arp requests. This is an example of a portion of what was sent to me from the logs (with Mac addresses and IP addresses changed). xxxx:xxxx:xxxx/0.0.0.0/0000.0000.0000/[myipaddress]/[Datestamp]) I don't see anything in the arp tables (arp -a) or routing tables (netstat -r) and I don't see anything relating to 0.0.0.0 when snoping the arp requests. The only place I see any reference to 0.0.0.0 is if I do netstat -a for the SCTP SCTP: Local Address Remote Address Swind Send-Q Rwind Recv-Q StrsI/O State ------------------------------- ------------------------------- ------ ------ ------ ------ ------- ----------- 0.0.0.0 0.0.0.0 0 0 102400 0 32/32 CLOSED But not really sure what that means. Doesn't seem like I can disable SCTP. Does anyone have any idea what might be causing this and how to stop it? I think the switch I'm connected to doesn't like it and momentarily drops the connection. Is there anyway to at least block those requests using ipfilter or something else?

  Read the article

• Server 2003, XP Clients, DNS issues

  - by ron

  Hello, Im having DNS issues on my network. My DC is my DNS server 10.76.4.11 and recently I configured a forwarder to 10.4.36.10. My workstations are not working because they cannot resolve the domain controller name because of DNS. an ipconfig /all reveals that they know the IP of the DNS server is 10.76.4.11, but if I nslookup 10.76.4.11 it forwards the request to 10.4.36.10 and goes nowhere. I have since removed the forwarder, but still any nslookup requests on workstations are going to 10.4.36.10. If I nslookup 10.76.4.11 on the server it can resolve its name, but for some reason when it receives the same request from workstations it doesnt know what to do. All the A, CNAME records etc are correct. DHCP's DNS is set correctly, GPOs are correct (even though they cant refresh cos of this problem!), the servers network adapter has its DNS set to 10.76.4.11. Just don't know. Very confused.

  Read the article

• When I log on to my company desktop, I log on to a domain. How is this domain name installed?

  - by learnerforever

  Hi, When I have to work on my machine in company, I have noticed that I log on to a domain (named on the basis of company name) and not really on that computer. From, what I understand, this has a few advantages, the primary being that I just need one password for the domain and can work through any of the machines in company. My questions are : What software on desktop/network have to be installed so that the desktop recognizes and gives me option of logging into a domain. I would guess that a software can be installed on desktop, and there we can configure the IP address of domain server of company and port number, which handles authentication. Is this correct? This takes me to another question that how are softwares installed on end machines in a company. Going to each machine physically and installing looks very unweildy from administrator point of view. An obvious solution would be to install softwares (and updates) over network. My question on this are: What protocols,keywords come into picture when administrator installs OS,softwares,updates from his administrator machine to end machine through network. Thanks,

  Read the article

• How do I access the web server on my desktop from my laptop?

  - by Steven

  I'm running Apache on my stationary and I would like to access a website through my laptop. This is some of the Apache config: NameVirtualHost 127.0.0.1:80 <VirtualHost 127.0.0.1:80> ServerName mysite.com DocumentRoot I:/wamp/www/mysite/ </VirtualHost> ServerName localhost:80 <Directory /> Options FollowSymLinks AllowOverride all Order deny,allow Deny from all </Directory> On my laptop I've added the following to the HOSTS file: 10.0.0.3 mysite.com But accessing the page through mysite.com is not very successfull. If I enter the IP address directly, I only get a Forbidden message. What do I need to do in order to get this to work? Update I'm runing WAMPSERVER 2.1 (Apache 2.2.17) Apache is up and running I can ping 10.0.0.3 from laptop I'm not able to ping http://mysite.com from laptop IE gives me a 403 Forbidden - The website declined to show this webpage The only log that get's entries when trying to access the website from my laptop, is access.log. access.log 10.0.0.4 - - [13/Jun/2011:10:14:04 +0200] "GET / HTTP/1.1" 403 202 apache_error.log [Mon Jun 13 10:08:16 2011] [error] VirtualHost localhost:0 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results UPDATE 2 My apache config has the following entry: AllowOverride all Order Deny,Allow Deny from all Allow from 127.0.0.1 Could it be that this Allow from is stopping other computers accessing the page?

  Read the article

• 16-bit MS-DOS Subsystem: csrss.exe

  - by Wesley

  Hi all, I just booted up my Samsung N120 netbook (with Windows XP Home SP3) and a dialog box came up with a command prompt window behind it. The dialog box is titled 16 bit MS-DOS Subsystem and the message is as follows: C:\DOCUME~1\SAMSUNG\csrss.exe The NTVDM CPU has encountered an illegal instruction. CS:0544 IP:0117 OP:63 00 64 00 34 Choose 'Close' to terminate the application. This only started on my most recent boot-up. One thing to note is that when I downloaded the Dropbox installer and opened it up, Panda Cloud Antivirus detected a suspicious file, which was csrss.exe and "neutralized it." However, an actual virus or trojan was not detected immediately before the file was detected and neutralized. Just under two weeks ago, a trojan and two viruses were detected for some odd reason. (I only went to website I knew and I do not torrent or browse adult sites.) Anyhow, the two viruses came up in temporary files and the trojan was "neutralized." Anyways, the main question is: How can I repair the csrss.exe file such that Windows XP starts up properly? A screenshot could be posted upon request. Thanks in advance!

  Read the article

• Microsoft Remote Desktop Services - Android

  - by Matt Rogers

  We have recently started testing Remote Desktop Services. We have deployed the environment using the latest server, Windows Server 2012 R2. We have deployed the Web Access Roles, RD Gateway, Connection Broker Virtualization Host and Session Host. We are running both, Virtual machine-based and Session-based deployments. All of these are working as expected internally and externally when using a Windows workstation as the RDS client, however, the Android client is unable to launch applications. Once you install the app from Google Play you are given a screen to add Remote Resources. After entering the appropriate URL, username and password we see the applications that have been published. Unfortunately, when we attempt to launch an app we get the following error: Connection Error Host not found. Please provide the fully-qualified name or the IP address of the host. We have already entered this information otherwise I don't believe we would be able to see the published applications. I think the error is related to the certificate and how it is being used to connect to the applications. Since this is in our lab environment we have not configured a valid external certificate on the servers and the trusted certificate that is installed on the android tablet points to our internal server / domain name. What I would like to know: Has anyone configured RDS Web Access on Server 2012 R2 and attempted to externally connect an Android or iOS device using the Microsoft supported Remote Desktop client. Are others experiencing the same problem we are? Were you able to resolve the issue? Was it related to the external cert / host name?

  Read the article

• Reloading NAT configuration on a running VMWare Server 2.0.2

  - by Jonathan Clarke

  I have a server running VMWare Server 2.0.2. The host is Debian Lenny. I have 15-20 virtual machines running, all attached to a single NAT network (named vmnet8). I have configured VMWare's NAT (the vmnet-natd daemon) to forward some incoming to ports to one of the VMs, since it hosts some publicly accessible services. I did this via the file /etc/vmware/vmnet8/nat/nat.conf by adding lines like the following: 80 = 192.168.100.100:80 This works great, I can reach the web server on the VM at 192.168.100.100 by connecting to the host's IP address. Sometimes, I need to add port redirections to this NAT configuration. So, I add a line to the configuration file. Now for the question. How do I make the natd process take this new configuration into account? Clearly, restarting the host machine does take it into account, and the newly added port is forwarded. However, this is not an option on this server, so how should one do this without restarting the whole host? Thanks for any ideas!

  Read the article

• what can be causes of http server crash?

  - by mithunmo

  Hello , I am using WAMP server on Windows XP. Apache 2.2.11 MySQL 5.1.36 (INNODB engine) PHP 5.3.0 I observe that my WAMP server crashes in the following scenarios IF I use a Low end PC ( low processor speed and low RAM) After making some changes to httpd.conf file .For eg changing the Allow from IP address . But here it crashes only once and then it starts to work fine. Random crashes CRASH LOG szAppName : httpd.exe szAppVer : 2.2.11.0 szModName : php5ts.dll szModVer : 5.3.0.0 offset : 0000c309 C:\DOCUME~1\blrcom\LOCALS~1\Temp\WERc677.dir00\httpd.exe.mdmp C:\DOCUME~1\blrcom\LOCALS~1\Temp\WERc677.dir00\appcompat.txt My questions Does high CPU utilization/LOW RAM can also cause the HTTP server to crash ? excessive file reading as in every 10 seconds ? unlimited script execution time . I have set the maximum execution time in php script to 0 as my script has to execute for sometimes 2-3 days. Is there any way to avoid this ? Access to Database ? Should we use lock before reading and writing Can these be the reasons for random wamp server crashes ? OR is is some other programming error ? Please guide me . Regards, Mithun

  Read the article

< Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >