Search Results

Search found 16748 results on 670 pages for 'port block'.

Page 404/670 | < Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >

• What constitutes valid justification for more IP addresses?

  - by David

  I host a small website with a well known VPS service. They provided me with one IPv4 address upon registering and said additional addresses would require justification. I requested one additional IPv4 address so as to have one for a production environment and one for a testing/QA environment. They said this was unnecessary as I could just use alternative TCP ports for the test environment. I can live with using a non-standard port for non-production hosting, but it got me thinking, what would be valid justification? (I asked them and they didn't want to answer). Is there an industry standard for what counts as "valid" justification for additional IPv4 addresses?

  Read the article

• How can I configure Adobe Help so it doesn't chatter so much with Adobe's domain?

  - by Michael Prescott

  Adobe Help that came with Creative Suite 5 and/or Flash Builder Pro is constantly creating network traffic with an Adobe site, www.wip4.adobe.com In the Adobe Help application Preferences, I find that I can change the settings so that I must manually download updates, but apparently the application still likes to call home and chatter non-stop with www.wip4.adobe.com. I could use something like Little Snitch to block all this spyware-like behavior, but I'd really prefer to just change the application's behavior. Is there a hidden setting or configuration file to adjust this behavior to something more appropriate and polite?

  Read the article

• What hardware is at physical address 0x80000000 on powerpc New World Macintosh?

  - by tinkerer

  Open Firmware device tree gives no clue what device might decode at physical address 0x80000000 to 0x8008200 on a G4 New World Macintosh. The mmu has three adjacent Virtual=Real translations for that block. They are the only address translations reported between the top or physical dram at 20000000 and the start of the PCI bridges at f0000000. (A possible clue is that frame-buffer-addr is reported as 9c008000 by Open Firmware, and that is not in the reported translation table either). I believe the architecture has been around since about 1999.

  Read the article

• Advice for migrating email server

  - by Chris Adams

  Hi there, I'm planning to migrate a Zimbra server with about 200gb of data from a server hosted in an office into a datacentre, to increase uptime (we've had a couple of outages when our network here started flaking out, and we have people in other countries relying on this server too). However, I'm not sure how best to migrate the data into the data centre without rendering the connection unusable during office hours, because there's far too much to send in over night over the two meg upstream connection we have here. I'm familiar with using tools like nice to stop a long running process degrading machine performance - is there a simple way to throttle a connection between office hours, so the long running transfer doesn't block the pipe, but then opens up outside of office hours to make the most of the bandwidth? I'm aware the alternative here is to simply mail a hard drive to the data centre, but I'd like to avoid doing that if I could. We're using Centos Linux for our servers, in the office and the datacentre, so extra points for an open source linux answer.

  Read the article

• Using video ports 'backwards'

  - by ACarter

  If I want to connect my laptop, which has a VGA output, to a monitor, I plug a VGA cable into both ends. The output being my laptop, and the input the monitor VGA output sockets are the same as VGA input sockets however, so what if I want to use my laptop as the monitor, with the video being outputted from somewhere else? As I said, VGA's output is the same as input, so in theory, I have the hardware in my laptop to do this. But presumably I need some software. So can I use the VGA port on a laptop as a video input? (And also, can this be done with HDMI?)

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  Crossposted from here I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• Meta refresh tag not working in (my) firefox?

  - by mplungjan

  Code like on this page does not work in (my) Firefox 3.6 and also not in Fx4 (WinXPsp3) Works in IE8, Safari 5, Opera 11, Mozilla 1.7, Chrome 9 <meta http-equiv=refresh content="12; URL=meta2.htm"> <meta http-equiv="refresh" content="1; URL=http://fully_qualified_url.com/page2.html"> are completely ignored Not that I use such back-button killing things, but a LOT of sites do, possibly including my linux apache it seems when it wants to show a 503 error page... If I firebug or look at generated content, I do not see the refresh tag changed in any way so I am really curious what kind of plugin/addon could block me which is why I googled (in vain) for a known bug... In about:config I have accessibility.blockautorefresh; false so that is not it. I ran in safe mode and OH MY GOD, STACKEXCHANGE IS FULL OF ADS but no redirect

  Read the article

• VNC unattended Server (No user Interaction)

  - by Louis van Tonder

  I worked on a proof on concept a while ago.... whereby I managed to get VNC going in full "unattended" mode... I.e. The VNC Server dials into the viewer... which is running in Listening mode. The same concept of how single click works, but without the user interaction. I cant seem to locate my source files for this concept I worked on... although I have found my shortcut that worked on the Viewer side to listen. "C:\Program Files\UltraVNC\vncviewer.exe" -listen 5007 /noauto /256colors I can not however remember/locate my demo of what the server is doing.... how to configure it. If I remember correctly, the server was also started with command line params that "dialed" into a remote IP/port, that the viewer is listening on. Any ideas? Thanks

  Read the article

• How to Access an AWS Instance with RDC when behind a Private Subnet of a VPC

  - by dalej

  We are implementing a typical Amazon VPC with Public and Private Address - with all servers running the Windows platform. The MS SQL instances will be on the private subnet with all IIS/web servers on the public subnet. We have followed the detailed instructions at Scenario 2: VPC with Public and Private Subnets and everything works properly - until the point where you want to set up a Remote Desktop Connection into the SQL server(s) on the private subnet. At this point, the instructions assume you are accessing a server on the public subnet and it is not clear what is required to RDC to a server on a private subnet. It would make sense that some sort of port redirection is necessary - perhaps accessing the EIP of the Nat instance to hit a particular SQL server? Or perhaps use an Elastic Load Balancer (even though this is really for http protocols)? But it is not obvious what additional setup is required for such a Remote Desktop Connection?

  Read the article

• Connect macbook to my LAN through a VPN - best solution?

  - by LewisMc

  So I have a LAN connected via a ADSL/PPPoA, this is using a bog-standard DLink router supplied by my ISP (talktalk UK). I have a NAS within the LAN that is running FreeNAS and I want to be able to connect to it when I'm out and about. It's running an atom so it's quite low on juice consumption but I don't want to have it on all day and night so I've been waking it via a magic packet and booting it down from the web admin when I need it. So I want to connect to the LAN, I presume via a VPN, to be able to send a magic packet. But what is the best method to accomplish this, or is there an easier way? I've been looking at the cisco 857 integrated router and the Netgear prosafe 318(behind modem) but not sure If I'm on the right track with what I want to achieve as I've not much experience or knowledge with VPN's or networking (software engineering student). I have tried port forwarding but to no avail, either with magic packets or even connecting outside the LAN via DYNDNS. Thanks,

  Read the article

• Disable ALTQ for internal network traffic

  - by javanix

  I currently have a FreeBSD 8.2 media server set up on my LAN that I use to stream my music from. I also have an SSH login that I use to do file transfers to and from this server remotely. I would like to set up ALTQ (and have gotten this working) to limit my outgoing bandwidth from the server for SSH traffic. However, configuring ALTQ this way is also limiting my internal traffic (and thus interfering with my music streaming) since I am only using a single network interface. Can anyone show me how I would use PF and ALTQ to limit outgoing WAN traffic while allowing all internal LAN traffic to go through unhindered? ext_if="eth0" int_if="eth0" altq on eth0 cbq bandwidth 1Mb queue { std, ssh } queue std bandwidth 80% cbq(default) queue ssh bandwidth 20% cbq(ecn) pass out on eth0 proto tcp to port 22 queue ssh eth0 is my LAN interface, my total WAN bandwidth on my cable connection is 1Mb/s, and my internal network is 10/100.

  Read the article

• ARM Debian (squeeze) USB driver with mismatch 3.3.3 kernel but /lib/modules/2.6.36

  - by frank

  Hei guys, my sheevaplug embedded server works fine, but when I wanted to use USB, the device gets not attached to /dev/tty/USB0 lsusb shows correctly: Bus 001 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port an modprobe usbserial raises: FATAL: Could not load /lib/modules/3.3.3/modules.dep: No such file or directory in the /lib/modules/ Folder there is instead a 2.6.36-Folder uname -r gives 3.3.3 How can I overcome this mismatch? Can I create a symlink? I can't flash this embedded device since it is deployed somewhere, only ssh? Please advise!

  Read the article

• Remote desktop to my KVM virtual machine

  - by user6

  I've got a dedicated server running Debian 6. I've set up a windows 7 virtual machine using KVM. Now I'm trying to get Remote desktop working. I'm guessing i have to do some port forwarding. The virtual machine is in a NAT. Remote desktop is already set up on it (another virtual machine can connect). I've tried using the iptables and countless of virsh commands of which I'm not even sure what they did. Anyone knows how to get this working?

  Read the article

• vps like [load] graphs

  - by foober

  I investigated a couple of tools but they were really annoying and not polished. kSar for exampe is supposed to graph sar output, but it doesn't work. There's a perl script around (sar2rrd) that's supposed to convert sar output in rrd format and generate graphs. Doesn't work. (at least it doesn't like the output of "atsar" as per debian/ubuntu package). Tried munin but it wants to mess with http servers, and for some reason it didn't really work, too. It displayed errors in the webpage generated by the http server it put on port 4949. So, is there a simple install and forget tool to generate daily load,cpu,memory,network graphs? It seems strange to me that this problem has not been solved, maybe I'm looking in the wrong places

  Read the article

• I can't get my Macbook Pro to print to an IP addressable printer

  - by Pieter

  Running Macbook Pro OS X 10.6.3 Accessing an HP OfficeJet 5610 plugged in the USB port of a US Robotics router. I tried several combinations of: Protocol: Internet Printing Protocol (IPP) Line Printer Daemon (LPD) HP JetDirect (socket) Address: http://192.168.1.10:1631/printers/HP5610 192.168.1.10:1631/printers/HP5610 http://192.168.1.10:1631 192.168.1.10:1631 192.168.1.10 ... Driver: HP OfficeJet 5600 Series Whenever I try to print, it fails while saying "connected to printer" or "Printer is busy...zill try again in X seconds" Both Windows 7 and Windows XP computers on the network can successfully access this printer, identifying it as "HP5610 on http://192.168.1.10:1631/" I tried clearing all tasks and printers (ctrl-click in the menu), and resetting it to (socket, http://192.168.1.10:1631/printers/HP5610, HP5600 series) but to no success.

  Read the article

• Could a computer act (dependably) as a wireless router for 200+ clients? [closed]

  - by awkwardusername

  That is, I have a Core 2 Duo E7500 at 2.93GHz, with 2GB memory. I plan to install either Windows Server 2012 or Zeroshell 2.0RC1, and it also (planning to) includes two PCIe Wireless Card Adapters. It also has one ethernet port, and I will connect that to another machine which will be a Database and a Web Server. My plan is to have a corporate level wireless intranet with 200+ clients. I cannot afford to buy routers because I want to operate at zero costs as possible, utilizing my available resources. Is that plan plausible? Also, what minimum specs should my wireless card have? @SvenW: Oh, I meant corporate on the deployment level. I am still an undergraduate and this is more of an educational and expiremental work than an actual project. I got Windows Server 2012 for free though, and this isn't actually for commercial use.

  Read the article

• Transferring analog media (VHS casettes, vinyl records) to PC

  - by Javier Badia

  I have some VHSs and vinyl records which I'd like to convert to DVDs and CDs, respectively. I have a couple of questions about how to hook the devices up to the computer. I've seen some RCA-to-USB cables on the Internet like this one. Will those work for connecting the VCR to the computer? And what program would I use to take that and save it as a video file? Can I connect the phonograph directly to the Line In port in my PC or do I need some amplifier or something in the middle? I'm using Windows 7 x64, if it matters.

  Read the article

• How do ISPs/Colocation Facilities limit bandwidth for Ethernet Drops?

  - by Kyle Brandt

  I have switch providers and have run into some problems with bandwidth limitations. I have more bandwidth then before, but there are performance issues. The router is connected to a 100mBit port, but they limit it to arbitrary settings (in software I imagine). It seems when I go above the limit, the provider starts to drop packets beyond the limit (This is what they said they do as well). Is it possible the previous provider did something like queuing packets above the this limit before dropping them? Is anyone aware of not only what can be done, but what is typical? Also, is there anything I can do on my Cisco router to help this situation? It would seem I am pretty helpless if the packets are dropped before they reach my interface (The traffic that is high is inbound to my network).

  Read the article

• Methodologies for performance-testing a WAN link

  - by Chopper3

  We have a pair of new diversely-routed 1Gbps Ethernet links between locations about 200 miles apart. The 'client' is a new reasonably-powerful machine (HP DL380 G6, dual E56xx Xeons, 48GB DDR3, R1 pair of 300GB 10krpm SAS disks, W2K8R2-x64) and the 'server' is a decent enough machine too (HP BL460c G6, dual E55xx Xeons, 72GB, R1 pair of 146GB 10krpm SAS disks, dual-port Emulex 4Gbps FC HBA linked to dual Cisco MDS9509s then onto dedicated HP EVA 8400 with 128 x 450GB 15krpm FC disks, RHEL 5.3-x64). Using SFTP from the client we're only seeing about 40Kbps of throughput using large (2GB) files. We've performed server to 'other local server' tests and see around 500Mbps through the local switches (Cat 6509s), we're going to do the same on the client side but that's a day or so away. What other testing methods would you use to prove to the link providers that the problem is theirs?

  Read the article

• embedded tomcat 7 behind iis 7.5 proxy ssl problems

  - by user1058410

  I'm using embedded tomcat 7 behind a iis 7.5 proxy server, with requests being forwarded to tomcat with arr. Everything works fine unless iis is set to require ssl. Then things like links that are generated dynamically in .jsp files on tomcat don't work right. For example if a link is supposed to point to _https://somewhere.com:443 it will be wrote as _http://somewhere.com:8080 (8080 is the port tomcat is running on). The problem seems to come from when tomcat looks at itself to build out the url it sees correctly that it is running on _http://somewhere.com:8080, but i need it to think otherwise. Does anybody know how to accomplish this without using ssl between iis and tomcat? Sorry for the underscores in front of the imaginary urls.

  Read the article

• Lost Page Write I/O Errors on CentOS LVM setup

  - by Gregg Leventhal

  I have a CentOS 6 box with LVM setup and one of the PVs is a USB disk (I know). One of them is getting the error: Oct 30 10:57:07 alpha01 kernel: lost page write due to I/O error on dm-3 Oct 30 10:57:07 alpha01 kernel: Buffer I/O error on device dm-3, logical block 4 Which is causing problems with all of the LVs on it. pvs shows the PV as unknown device. I can ls to the logical volumes and they show up in lvdisplay, but first I get a bunch of IO errors. I made sure the cables are secure between the USB drive. What should I do to get this back up and running for the meanwhile? Should I unmount each LV and run an fsck.ext4 on each one like fsck.ext4 -y /dev/vg1/lv_logvolname ?

  Read the article

• FM Transmitter for the Home

  - by greggannicott

  After asking this question regarding piping music through my home I'm looking to buy an FM transmitter. I'd like to connect it to my home pc (ie. into the speaker port), and I'd then control the output with my iPhone (ie. using Apple's Remote software). The problem is, given that almost every FM transmitter is advertised to be used in the car (ie. an iTrip) it's proving very tricky knowing which one would be ideal for the home. First, has anyone tried this? Did it work ok or was there simply to much interference for it work. Secondly, if it did work ok, can anyone recommend a reasonable transmitter? For what I need it seems like an ideal solution, so given that I'm struggling to find information regarding it I'm starting to believe it's not as ideal as it first seems. Thanks in advanance.

  Read the article

• Too Many Files In Debian Linux Folder?

  - by Dave Potts

  I've been using an external USB drive on a Debian server for backup. The drive is formatted as NTFS and mounted with ntsfmount. This was working fine, but I was filling up a directory with lots of files. Eventually the backup failed. When I then tried to look at the directory using ls it reported: ls: reading directory .: Numerical result out of range Looking in syslog, I also saw this: Sep 23 07:35:31 tosh ntfsmount[28040]: Failed to read index block: Numerical result out of range. Is this simply that I've reached the upper limit of number of files in a directory? If so, is there any way to extend the number of allowed files?

  Read the article

• Is there a way to control two instantiated systemd services as a single unit?

  - by rascalking

  I've got a couple python web services I'm trying to run on a Fedora 15 box. They're being run by paster, and the only difference in starting them is the config file they read. This seems like a good fit for systemd's instantiated services, but I'd like to be able to control them as a single unit. A systemd target that requires both services seems like the way to approach that. Starting the target does start both services, but stopping the target leaves them running. Here's the service file: [Unit] Description=AUI Instance on Port %i After=syslog.target [Service] WorkingDirectory=/usr/local/share/aui ExecStart=/opt/cogo/bin/paster serve --log-file=/var/log/aui/%i deploy-%i.ini Restart=always RestartSec=2 User=aui Group=aui [Install] WantedBy=multi-user.target And here's the target file: [Unit] Description=AUI [email protected] [email protected] After=syslog.target [Install] WantedBy=multi-user.target Is this kind of grouping even possible with systemd?

  Read the article

< Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >