Search Results

Search found 15323 results on 613 pages for 'db2 connect'.

Page 405/613 | < Previous Page | 401 402 403 404 405 406 407 408 409 410 411 412 | Next Page >

WiFi slow sometimes, reboot helps, how do I debug it?

- by January

Ubuntu 12.04.1 with all updates installed. Laptop Lenovo Thinkpad X230 with Intel Corporation Centrino Advanced-N 6205. WiFi sometimes becomes extremely slow. Often this occurs when I wake the system from suspend and connect to a different network. I find no obvious clues in system logs. /etc/init.d/network-manager restart doesn't help, but a reboot does. How can I go on with debugging this issue? In specific, which parts of the system should I try to restart (without a complete reboot)? I know of problems with Intel WiFi (see for example this question and the instructions here), but if that was the problem, I would expect the WiFi to be slow at all times, and not just sometimes. Also, I have a gut feeling that it might be a DNS issue (for example, getting a page from a known server is faster than accessing a new server), but I don't know how to tackle it. Update: despite numerous updates in the meanwhile, I still observe this behavior. It happens always when I access my WiFi router at home after returning from work; when I reboot my laptop, the connection speed is good again.

Read the article
Is Windows 8 Pro usable without activation?

- by DzinX

There seems to be little information about the way activation system works in Windows 8, especially for consumer versions of Windows (Core/Pro, not Enterprise). I already know that Microsoft now requires you to enter a key before even starting the installation process, and that it tries to connect to the Internet and activate this key as soon as possible. Sometimes, though, you don't have Internet connection when installing Windows 8. What then? Can you install Windows? Can you use it? What are the limitations? For how long can you keep your copy of Windows usable without activation?

Read the article
VMware virtual network adapters and Windows Firewall

- by anonymous

I am running VMware Workstation 7.1.4 on Windows 7 Enterprise SP1-U (x64). Aside from the physical network adapter, I have created a single virtual network adapter (VMware Virtual Ethernet Adapter for VMnet1) which is connected to (can be seen by) the host and the guests. My problem is, even after applying the "*NdisDeviceType = 1" tweak to the virtual adapter, making it disappear from the Network and Sharing Center, I still can't connect to programs running in the host from the guests, unless I specifically "allowed the program to communicate with the public network" using the Windows Firewall (which I don't want to do). This happens to all the programs and services running in the host (File and Printer Sharing, Database server, HTTP proxy, etc.) I am getting the impression that applying the "*NdisDeviceType = 1" tweak only hides a network from the Network and Sharing Center but not actually making it private. Any hints and suggestions?

Read the article
SearchServer2008Express Search Webservice

- by Mike Koerner

I was working on calling the Search Server 2008 Express search webservice from Powershell. I kept getting <ResponsePacket xmlns="urn:Microsoft.Search.Response"><Response domain=""><Status>ERROR_NO_RESPONSE</Status><DebugErrorMessage>The search request was unable to connect to the Search Service.</DebugErrorMessage></Response></ResponsePacket>I checked the user authorization, the webservice search status, even the WSDL. Turns out the URL for the SearchServer2008 search webservice was incorrect. I was calling $URI= "http://ss2008/_vti_bin/spsearch.asmx?WSDL"and it should have been$URI= "http://ss2008/_vti_bin/search.asmx?WSDL"Here is my sample powershell script:# WSS Documentation http://msdn.microsoft.com/en-us/library/bb862916.aspx$error.clear()#Bad SearchServer2008Express Search URL $URI= "http://ss2008/_vti_bin/spsearch.asmx?WSDL"#Good SearchServer2008Express Search URL $URI= "http://ss2008/_vti_bin/search.asmx?WSDL"$search = New-WebServiceProxy -uri $URI -namespace WSS -class Search -UseDefaultCredential $queryXml = "<QueryPacket Revision='1000'> <Query > <SupportedFormats> <Format revision='1'>urn:Microsoft.Search.Response.Document.Document</Format> </SupportedFormats> <Context> <QueryText language='en-US' type='MSSQLFT'>SELECT Title, Path, Description, Write, Rank, Size FROM Scope() WHERE CONTAINS('Microsoft')</QueryText>  </Context> </Query></QueryPacket>" $statusResponse = $search.Status()write-host '$statusResponse:' $statusResponse $GetPortalSearchInfo = $search.GetPortalSearchInfo()write-host '$GetPortalSearchInfo:' $GetPortalSearchInfo $queryResult = $search.Query($queryXml)write-host '$queryResult:' $queryResult

Read the article
How do I setup a Gnome 3.2 VPN connection (Fedora 16)

- by mpeters

I just switched to Gnome 3 on a new laptop to try it out. Lots of things are different, but I think I can get used to them. But I'm having a real problem trying to figure out how to get the new network manager to setup a VPN through the GUI. I have openvpn, NetworkManager and NetworkManager-openvpn installed, but when I click on the network icon in gnome-shell there is nothing about vpn connections in there. When I click the "Network Settings" link in that menu I just see menus for Wired, Wireless and Network Proxy and none of those screens has anything for VPN connections either. Any suggestions about where I need to look to setup my connections and how to make it easier connect when I need to?

Read the article
Server responses "bus error" to every command

- by Temnovit

I have a linux machine dedicated to MySQL server with a pretty high load. Today I woke up and was terrified to see, that database server is down. I could connect to it via SSH, but it was responding with bus error to each and every command. [root@r1304 home]# ls Bus error [root@r1304 home]# tail /var/log/messages Bus error [root@r1304 home]# reboot Bus error [root@r1304 home]# free -m Bus error [root@r1304 home]# chkdisk Bus error I went to Data Center and did a hard reset, which seemed to help, but after a half an hour situation reapeated and now I can't even connet via SSH anymore. Any ideas what this could be? how to diagnose such a problem and what are possible fixes? Server has 32 GB RAM, 2xSSD drives with software RAID UPDATE According to Zabbix, when MySQL died, number of processes stated to increase drammaticaly, until I did a hard reset. What could those be? Number of processes

Read the article
Laptop's wifi router is not emitting signals therefore my PC and Nokia cell are not connecting to internet

- by umer sanny

I have a USB internet connection which I plugged into my laptop. I converted my laptop's Wifi into a Wifi router so that I can attach my PC and cell to this network and enjoy internet, but it doesn't work. I have a Dell Inspiron N5110 i7 Windows 7 64-bit laptop, Dell D865 PC and Nokia C5. My PC and cell are showing that there is a new Wifi connection available, but when I connect to it, it won't load any web page. Reason is my laptop's Wifi is not emitting any internet signals or may be some other issue which i dont know.. laptop's adapter is 802.11b/g/n I don't know why. How can I enjoy Wifi internet on laptop, PC and cell at the same time?

Read the article
SSH authentification with public key fails

- by palani

I have my id_rsa.pub key under my /home/user/.ssh. I carefully copied that key and paste my key to respository Git account. While trying to connect from my local system to my git respository, I got the following error: warning: Authentication failed. Disconnected; no more authentication methods available (No further authentication methods available.) I removed SSH in system and re-enable and did again, but no luck. I have no idea what's happening with my SSH key. Can any one please tell me on this? Note : I noticed in my home /home/user/.ssh && /home/user/.ssh2

Read the article
Connecting/Adding a private network on windows server 2008

- by WhyMe

Hey all, I have a dual server configuration on a host provider using VPS. I was told by my Host provider that in order to use free bandwidth between my two servers (they are in the same location) I need to add a alias "subnet" to a specific ip (A private network, VPN). How do I add an aliased ip in widnwos? in Linux the relevant command is supposed to be (By my search in blogs) "ifconfig eth0:1 10.129.175.165 netmask 255.255.255.0" They also said that another way to connect between the servers (should also be faster) is to use "private lan", but as it happens I don't know how to define one :(. Is there a windows equivalent or another way to do this? I have checked my ip config and found no indication of the private lan or the VPN ip.

Read the article
linux kernel option to set sata disk to udma/133 1.5gbps

- by John Doe

hi, i try to speed up boot time of my linux server box which uses removable HDD rack's the current boot time is around 2 min's but if i connect the hdd's directly to the mainboard its about 2 sec's the problem is that ahci's kernel implementation causes a timeout of around 30 seconds for each disk during boot which originates from the hdd-rack after the timeout the kernel prints that the disk is limited with speed to 1.5gbps and udma/133 is used so the question i have is: how can i set this in grub as a boot option so the kernel doesnt have to wait for a timeout and just hardcoded limits the speed of the disks? i read about a few options like pci=nomsi or such, which dont work thats why im asking for limiting precisely the disks during boot thx

Read the article
What's the easiest way to create an HTTP proxy which adds basic authentication to requests?

- by joshdoe

I am trying to use a service provided by a server which requires basic HTTP authentication, however the application I am using does not support authentication. What I'd like to do is create a proxy that will enable my auth-less application to connect via the proxy (which will add the authentication information) to the server requiring authentication. I'm sure this can be done, however I'm overwhelmed with the number of proxies out there and couldn't find an answer how to do this. Basically it seems all I want to do is have a proxy serve this URL: http://username:password@remoteserver/path as this URL: http://proxyserver/path I can run it on Linux, but a plus if I can run it Windows as well. Open source or at least free is a must. A big plus is if it's fairly straightforward to setup.

Read the article
Ubuntu 12.04 LTS - Apple iPad 3 (iOS 7 non-jailbroken) USB connection problem

- by Eldian

I've bought an Apple iPad 3 (iOS 7 non-jailbroken), and I'm trying to connect it to my PC running Ubuntu 12.04 through the original USB cable. After I plugged in the cable, I got this message on the PC: The device 'iPad' is locked. Enter the passcode on the device and click 'Try again'. Slide to unlock on iPad, it's OK, I got this message on the PC again: The device 'iPad' is locked. Enter the passcode on the device and click 'Try again'. iPad: Trust this computer? TRUST/DON'T TRUST I've selected TRUST. PC: Unable to mount - DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) OK, I've read some forums, everywhere there was this solution: "Install: ifuse, libimobiledevice-utils, Rhythmbox OK, I've installed them through terminal, and used the idevicepair unpair && idevicepair pair command also in the terminal. Then I got this message: Device is not paired with this host. I don't know what to do. Please help!

Read the article
10 System LAN latency with ADSL modem as gateway

- by itsoft3g

Recently I expanded LAN in my office from 3 to 10 computers. Structure star topology, one ADSL Modem connected to One Switch which is again connected to 10 computers. Also we have Wifi device Netgear which is connected from switch. ADSL Modem acts as the DHCP Server, all the system will have default gateway IP (ADSL Modem's IP) Network latency is now become very high, All the chat severs disconnect often like google talk, skype etc, also internet become very very slow. when all the computer turned on. We have 4 Mbps Download and 100 Kbps upload Net speed. Its look like ADSL Modem cannot able to handle all the connections. I tried to setup a system as default gateway which will connect to modem, not sure how to do this. Please advice on this.

Read the article
Ubuntu Server 12.04 as a router. Problem with DNS?? Or Routing table?

- by Lorenzo

I have a virtualbox lab made up of 4 Windows 2008 R2 servers (DC/DNS,SQL,SHAREPOINT, EXCHANGE) that are configured with static ip addresses with NIC's attached to Internal network. Everything works. I had the requirement to execute some tests that also access external services available on the internet. To keep things clean and similar to the production environment I have installed another VM, with Ubuntu Server 12.04 64 bit and configured (I hope) to work as a router like described on this post. This VM has two network interfaces: first is Bridged with the host and is used as a WAN connection and the other one attached in the Internal Network with its own static IP address on the internal network subnet. But actually the Windows servers does not connect to the internet while the unix one connects. I did a route command. this is the result: Kernel IP Routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.69.121.1 0.0.0.0 UG 100 0 0 eth0 10.69.121.0 * 255.255.255.0 U 0 0 0 eth0 192.168.83.0 * 255.255.255.0 U 0 0 0 eth1 Can somebody help me with this configuration? :) Thanks! Addendum: I forgot to mention that one of the windows server hosts a DNS service for which I should maybe configure a forwarding server but I do not exactly know which server to forward on... :(

Read the article
pymatplotlib without xserver

- by vigilant

Is it possible to use networkx or pymatplotlib without an xserver running? I keep getting the following error with their first example (of networkx): Traceback (most recent call last): File "test.py", line 17, in <module> nx.draw(G,pos,node_color='#A0CBE2',edge_color=colors,width=4,edge_cmap=plt.cm.Blues,with_labels=False) File "/usr/local/lib/python2.6/dist-packages/networkx-1.3-py2.6.egg/networkx/drawing/nx_pylab.py", line 124, in draw cf=pylab.gcf() File "/usr/lib/pymodules/python2.6/matplotlib/pyplot.py", line 276, in gcf return figure() File "/usr/lib/pymodules/python2.6/matplotlib/pyplot.py", line 254, in figure **kwargs) File "/usr/lib/pymodules/python2.6/matplotlib/backends/backend_tkagg.py", line 90, in new_figure_manager window = Tk.Tk() File "/usr/lib/python2.6/lib-tk/Tkinter.py", line 1646, in __init__ self.tk = _tkinter.create(screenName, baseName, className, interactive, wantobjects, useTk, sync, use) _tkinter.TclError: couldn't connect to display ""

Read the article
Dial-in VPN Routing issue when on 192.168.x.x network range

- by Ian

I'm not an expert on networks but have a small office on the 192.168.x.x. range which is managed by a vigor (2800) router. I have enabled the VPN dial-in option on the router so I can get to the server on 192.168.1.100 which works fine from my macbook when i'm NOT on a local network with that is on the 192.168.x.x range. e.g. works fine when I tether over my Android smartphone but when I try & connect when on my home network, it connects, I can access the router (192.168.1.1) but cannot access 192.168.1.100 - traceroute doesn't hop via 192.168.1.1 I have enabled "send all traffic over VPN connection but again, not joy... Feels like the osx platform isn't routing the traffic out to the vpn endpoint as the destination address is on the local subnet but expect it would be. This work fine on a windows PC on the same home network. Any thoughts on what the issue could be?

Read the article
Apache connection intermittantly times out on LAN

- by jonescb

I'm using Fedora 12 with Apache 2.2.14, and I was having this error on 2.2.13 as well. Even when I connect to my server over LAN, Firefox will occasionally time out while connecting. I can't figure out what is causing this. The error log isn't showing anything. I even cleaned the error log file, so that if something happened, it'd be a little easier to spot. But I'm still getting time outs, and nothing in the error log. Can anybody help me find what the problem is? Here is my httpd.conf Pastebin It's the default Fedora configuration; I've only changed the ServerName if I remember correctly. I'm pretty sure it's not the Timeout setting, because on LAN it should never time out. I don't believe it's a load issue either, I'm the only one connecting to it. I'm not an Apache expert, so if more information is needed I'll need some instructions on how to get that data.

Read the article
One hard drive missing after converting from ide to ahci

- by user700859

I have two 500GB SATA HDD in my desktop running XP. After converting from IDE to AHCI, the HDD I use to store data can no longer be accessed from XP. It shows only the first partition as 150GB, and data type is listed as RAW. However, if I boot into a live linux environment or if I pull that HDD out and connect it using USB, I can still get to all my files again. So I completely formatted the HDD into one single partition. But XP still does not recognize it. It still shows the disk as the 150GB partition and data type is still RAW. What's going on and how do I fix this? Thanks in advance.

Read the article
ADD ROUTE command in windows 2008R2

- by Mehrdad Kamelzadeh

I don't know much about Networking, So excuse me if I am raising some basic issues. I have a LAN where there is a Windows Server 2008R2 with some clients connected to it. The clients are not joined to the domain of the Server (they are in a WORKGROUP). I have set up a VPS on the server machine (PPTP) with a Static address pool of range 10.0.0.1 - 10.0.0.10 but the LAN range itself is 192.168.1.1 - 192.168.1.254. When I connect to the server from another location over the internet, I can just see the server and I can not see the other clients which are in the same LAN as the server. what to do to see the other clients? a friend of mine said that you should use the ADD ROUTE command. Beacuse of that I used this command as my title. What would be the best way to address this problem? Thanks

Read the article
linking Office 365 and ADFS on Azure

- by Gaurav

i am trying to link my ADFS to Office 365 in order to set up Single Sign On for Office 365. I am going over this blog post. at Step 5, i am supposed to run Powershell commands so i can connect the ADFS to Office 365. Set-MsolAdfscontext -Computer <AD FS server FQDN> Convert-MsolDomainToFederated -DomainName <domain name> i am unable to determine the FQDN for the ADFS server. i searched around a lot on the web, but was not able to locate the solution. i am just getting started with all configuration of ADFS and Office 365, but was not able to find out a solution. any answers?

Read the article
How to sync client and server at the first frame

- by wheelinlight

I'm making a game where an authoritative server sends information to all clients about states and positions for objects in a 3d world. The player can control his character by clicking on the screen to set a destination for the character, much like in the Diablo series. I've read most information I can find online about interpolation, reconciliation, and general networking architecture (Valve's for instance). I think I understand everything but one thing seems to be missing in every article I read. Let say we have an interpolation delay of 100ms, server tickrate=50ms, latency=200ms; How do I know when 100ms has past on the client? If the server sends the first update on t=0, can I assume it arrives at t=200, therefore assuming that all packets takes the same amount of time to reach the client? What if the first packet arrives a little quick, for instance at t=150. I would then be starting the client with t=150 and at t=250 it will think it has past 100ms since its connect to the server when it in fact only 50ms has past. Hopefully the above paragraph is understandable. The summarized question would be: How do I know at what tick to start simulating the client? EDIT: This is how I ended up doing it: The client keeps a clock (approximately) in sync with the server. The client then simulates the world at simulationTime = syncedTime - avg(RTT)/2 - interpolationTime The round-trip time can fluctuate so therefore I average it out over time. By only keeping the most recent values when calculating the average I hope to adapt to more permanent changes in latency. It's still to early to draw any conclusion. I'm currently simulating bad network connections, but it's looking good so far. Anyone see any possible problems?

Read the article
NAT and NGINX on the same server

- by Morten

I'm setting up a VPC cluster for my collaborative todo list application www.getdoneapp.com. To have my servers on the private network I need a NAT server so my servers on the private network can connect to the internet to receive updates and what not. The NAT server will consume an elastic IP address, so I'm wondering if I can just have that NAT server run nginx to direct traffic to my internal servers for HTTP. So the question is, is it a bad idea to run NGINX and NAT on the same server, or should I go for consuming 2 elastic IP addresses?

Read the article
CentOS 6 - iptables preventing web access via port 80

- by bsod99

I'm setting up a new web server with CentOS 6.2 and am not able to connect via the web. Everything looks set up correctly in httpd.conf and Apache is running, so I'm assuming it's an iptables issue. Is there anything in the following which could be causing the issue? # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere state RELATED,ESTABLISHED ACCEPT icmp -- anywhere anywhere ACCEPT all -- anywhere anywhere ACCEPT tcp -- anywhere anywhere state NEW tcp dpt:ssh REJECT all -- anywhere anywhere reject-with icmp-host-prohibited ACCEPT tcp -- anywhere anywhere tcp dpt:http Chain FORWARD (policy ACCEPT) target prot opt source destination REJECT all -- anywhere anywhere reject-with icmp-host-prohibited Chain OUTPUT (policy ACCEPT)

Read the article
Anything to share a printer from 32-bit to 64-bit Windows?

- by marklam

I've got a printer which only has 32-bit drivers, so it's installed on a 32-bit machine (XP). I need it to appear as a printer (with duplex control etc) on a 64-bit machine (Vista). I can't just share it using Windows printer sharing because the 64-bit client requires drivers to connect to it. There's no 64-bit driver for a similar printer that works (using the new port named \\server\printername). I've tried the ghostscript approach but that doesn't seem to help with the duplex control etc. Printeranywhere doesn't support 64-bit OS yet. Is there another way to do this?

Read the article
How can I run a game server on a computer behind a NAT, if I have another computer not behind a NAT?

- by Macha

My home connection is part of a large NAT, outside my control. Inside my home, my router has a NAT, under my control. I control a public facing Linux VPS with one IP address, outside my home network. Ideally, what I'd like to do is set something up so that I connect my home computer to my VPS, and after that port X on my VPS leads to port Y on my home computer, for the purposes of running a game server of a game that does not run under Linux. Is this possible?

Read the article

< Previous Page | 401 402 403 404 405 406 407 408 409 410 411 412 | Next Page >