Search Results

Search found 12471 results on 499 pages for 'variable naming'.

Page 406/499 | < Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >

  • Iteration speed of int vs long

    - by jqno
    I have the following two programs: long startTime = System.currentTimeMillis(); for (int i = 0; i < N; i++); long endTime = System.currentTimeMillis(); System.out.println("Elapsed time: " + (endTime - startTime) + " msecs"); and long startTime = System.currentTimeMillis(); for (long i = 0; i < N; i++); long endTime = System.currentTimeMillis(); System.out.println("Elapsed time: " + (endTime - startTime) + " msecs"); Note: the only difference is the type of the loop variable (int and long). When I run this, the first program consistently prints between 0 and 16 msecs, regardless of the value of N. The second takes a lot longer. For N == Integer.MAX_VALUE, it runs in about 1800 msecs on my machine. The run time appears to be more or less linear in N. So why is this? I suppose the JIT-compiler optimizes the int loop to death. And for good reason, because obviously it doesn't do anything. But why doesn't it do so for the long loop as well? A colleague thought we might be measuring the JIT compiler doing its work in the long loop, but since the run time seems to be linear in N, this probably isn't the case.

    Read the article

  • Bind members of different classes

    - by 7vies
    In a C++ program I have two classes (structs) like struct A { int x; double y; // other members }; struct B { int x; double y2; // other members }; I'd like to somehow "bind" the corresponding members, e.g. A::x to B::x and A::y to B::y2. By "bind" I mean ability to obtain a reference to the bound variable, for example given a member of class A I could assign it to the value of the corresponding B member. Once I have such bind, I'd like to build a bind table or something similar which I could iterate over. This would allow, for example, copying the corresponding fields from A a; to B b; like CopyBound(a, b, bind_table);, but probably also doing some other things not limited to Copy interface. The problem with this bind_table is that I want static typing and the bind_table would have to contain different types in this case. For example, a table of pointers to class members would contain &A::x and &A::y, but they are of different type, so I cannot just put them say into an array. Any ideas how this can be conveniently implemented, having as much compile-time type checking as possible?

    Read the article

  • GAE AttributeError

    - by awegawef
    My GAE app runs fine from my computer, but when I upload it, I start getting an AttributeError, specifically: AttributeError: 'dict' object has no attribute 'item' I am using the pylast interface (an API for last.fm--link). Specifically, I am accessing a list of variables of this type: SimilarItem = _namedtuple("SimilarItem", ["item", "match"]) I have a variable of this type, call it sim, and I am trying to access sim.item when I get the attribute error. I should note that I am using Python 2.6 on my computer, and I understand that GAE runs on Python 2.5. Would that make a difference here? I thought they were backwards-compatible. Lastly, I think it could be a possible problem with the modules that pylast imports--maybe they don't work with GAE or something? I did some research but I didn't get any results. Here are the imports: import hashlib import httplib import urllib import threading from xml.dom import minidom import xml.dom import time import shelve import tempfile import sys import htmlentitydefs I would appreciate any help with this frustrating issue. Thanks in advance.

    Read the article

  • Mercurial Editor: "abort: The system cannot find the file specified"

    - by Killroy
    I have a problem getting Mercurial to recognise my editor. I have a file, c:\windows\notepad.exe and typing "notepad" at the command prompt works. I can commit by using the "-m" argument to supply the commit title. But a simple "hg commit" brings up the error. A call to "hg --traceback commit" brings up: Traceback (most recent call last): File "mercurial\dispatch.pyc", line 47, in _runcatch File "mercurial\dispatch.pyc", line 466, in _dispatch File "mercurial\dispatch.pyc", line 336, in runcommand File "mercurial\dispatch.pyc", line 517, in _runcommand File "mercurial\dispatch.pyc", line 471, in checkargs File "mercurial\dispatch.pyc", line 465, in <lambda> File "mercurial\util.pyc", line 401, in check File "mercurial\commands.pyc", line 708, in commit File "mercurial\cmdutil.pyc", line 1150, in commit File "mercurial\commands.pyc", line 706, in commitfunc File "mercurial\localrepo.pyc", line 836, in commit File "mercurial\cmdutil.pyc", line 1155, in commiteditor File "mercurial\cmdutil.pyc", line 1184, in commitforceeditor File "mercurial\ui.pyc", line 361, in edit File "mercurial\util.pyc", line 383, in system File "subprocess.pyc", line 470, in call File "subprocess.pyc", line 621, in __init__ File "subprocess.pyc", line 830, in _execute_child WindowsError: [Error 2] The system cannot find the file specified abort: The system cannot find the file specified I've tried setting the HGEDITOR environment variable, setting "visual =" and "editor =" in the Mercurial.ini file. I tried full path as well as command only. I also tried copying the notepad.exe file into both the current folder as well as the mercurial folder. Ideally I would like to use the editor at this location "C:\PortableApps\Notepad++Portable\Notepad++Portable.exe", but at this stage I would be happy with any editor!

    Read the article

  • Preventing iframe caching in browser

    - by Zarjay
    How do you prevent Firefox and Safari from caching iframe content? I have a simple webpage with an iframe to a page on a different site. Both the outer page and the inner page have HTTP response headers to prevent caching. When I click the "back" button in the browser, the outer page works properly, but no matter what, the browser always retrieves a cache of the iframed page. IE works just fine, but Firefox and Safari are giving me trouble. My webpage looks something like this: <html> <head><!-- stuff --></head> <body> <!-- stuff --> <iframe src="webpage2.html?var=xxx" /> <!-- stuff --> </body> </html> The var variable always changes. Despite the fact that the URL of the iframe has changed (and thus, the browser should be making a new request to that page), the browser just fetches the cached content. I've examined the HTTP requests and responses going back and forth, and I noticed that even if the outer page contains <iframe src="webpage2.html?var=222" />, the browser will still fetch webpage2.html?var=111. Here's what I've tried so far: Changing iframe URL with random var value Adding Expires, Cache-Control, and Pragma headers to outer webpage Adding Expires, Cache-Control, and Pragma headers to inner webpage I'm unable to do any JavaScript tricks because I'm blocked by the same-origin policy. I'm running out of ideas. Does anyone know how to stop the browser from caching the iframed content?

    Read the article

  • SQL - Converting 24-hour ("military") time (2145) to "AM/PM time" (9:45 pm)

    - by CheeseConQueso
    I have 2 fields I'm working with that are stored as smallint military structured times. Edit I'm running on IBM Informix Dynamic Server Version 10.00.FC9 beg_tm and end_tm Sample values beg_tm 545 end_tm 815 beg_tm 1245 end_tm 1330 Sample output beg_tm 5:45 am end_tm 8:15 am beg_tm 12:45 pm end_tm 1:30 pm I had this working in Perl, but I'm looking for a way to do it with SQL and case statements. Is this even possible? EDIT Essentially, this formatting has to be used in an ACE report. I couldn't find a way to format it within the output section using simple blocks of if(beg_tm>=1300) then beg_tm = vbeg_tm - 1200 Where vbeg_tm is a declared char(4) variable EDIT This works for hours =1300 (EXCEPT FOR 2230 !!) select substr((beg_tm-1200),0,1)||":"||substr((beg_tm-1200),2,2) from mtg_rec where beg_tm>=1300; This works for hours < 1200 (sometimes.... 10:40 is failing) select substr((mtg_rec.beg_tm),0,(length(cast(beg_tm as varchar(4)))-2))||":"||(substr((mtg_rec.beg_tm),2,2))||" am" beg_tm from mtg_rec where mtg_no = 1; EDIT Variation of casting syntax used in Jonathan Leffler's expression approach SELECT beg_tm, cast((MOD(beg_tm/100 + 11, 12) + 1) as VARCHAR(2)) || ':' || SUBSTRING(cast((MOD(beg_tm, 100) + 100) as CHAR(3)) FROM 2) || SUBSTRING(' am pm' FROM (MOD(cast((beg_tm/1200) as INT), 2) * 3) + 1 FOR 3), end_tm, cast((MOD(end_tm/100 + 11, 12) + 1) as VARCHAR(2)) || ':' || SUBSTRING(cast((MOD(end_tm, 100) + 100) as CHAR(3)) FROM 2) || SUBSTRING(' am pm' FROM (MOD(cast((end_tm/1200) as INT), 2) * 3) + 1 FOR 3) FROM mtg_rec where mtg_no = 39;

    Read the article

  • Perl Lingua giving weird error on install

    - by user299306
    I am trying to install perl Lingua onto a unix system (ubuntu, latest version). Of course I am root. when I go into the package to install using 'perl Makefile.pl' I get this dumb error: [root@csisl27 Lingua-Lid-0.01]# perl Makefile.PL /opt/ls//lib does not exist at Makefile.PL line 48. I have tried playing with the path on line 48, nothing changes, here is what line 48-50 looks like: Line 48: die "$BASE/lib does not exist" unless -d "$BASE/lib"; Line 49: die "$BASE/include does not exist" unless -d "$BASE/include"; Line 50: die "lid.h is missing in $BASE/include" unless -e "$BASE/includ/lid.h"; The variable $BASE is declared as this: $BASE = "/opt/ls/" if ($^O eq "linux" or $^O eq "solaris"); $BASE = "/usr/local/" if ($^O eq "freebsd"); $BASE = $ENV{LID_BASE_DIR} if (defined $ENV{LID_BASE_DIR}); Now the perl program I am trying to write simply look like this (just my base): #!/usr/bin/perl use Lingua::LinkParser; use strict; print "Hello world!\n"; When I run this trying to use Lingua, here is my error: [root@csisl27 assign4]# ./perl_parser_1.pl Can't locate Lingua/LinkParser.pm in @INC (@INC contains: /usr/lib/perl5/site_perl/5.10.0/x86_64-linux-thread-multi /usr/lib/perl5/site_perl/5.10.0 /usr/lib/perl5/vendor_perl/5.10.0/x86_64-linux-thread-multi /usr/lib/perl5/vendor_perl/5.10.0 /usr/lib/perl5/5.10.0/x86_64-linux-thread-multi /usr/lib/perl5/5.10.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl .) at ./perl_parser_1.pl line 3. BEGIN failed--compilation aborted at ./perl_parser_1.pl line 3. Tried insalling this from cpan, still doesn't properly work.

    Read the article

  • Setting LD_LIBRARY_PATH in Apache PassEnv/SetEnv still cant find library

    - by DoMoreASAP
    I am trying to test the Cybersource 3d party implementation. I was able to get the test files running fine from the command line, which requires that on Linux I export the path to the payment libraries to LD_LIBRARY_PATH. to try to test this on my server I have created the apache config below <VirtualHost 127.0.0.1:12345> AddHandler cgi-script .cgi AddHandler fcgid-script .php .fcgi FCGIWrapper /my/path/to/php_fcgi/bin/php-cgi .php AddType text/html .shtml AddOutputFilter INCLUDES .shtml DocumentRoot /my/path/to/cybersource/simapi-php-5.0.1/ ProxyPreserveHost on <Directory /my/path/to/cybersource/simapi-php-5.0.1> SetEnv LD_LIBRARY_PATH /my/path/to/cybersource/LinkedLibraries/lib/ AllowOverride all Options +Indexes IndexOptions Charset=UTF-8 </Directory> </VirtualHost> I have set the env variable there with SetEnv command, which seems to be working when i run a page that prints <?php phpinfo(); ?> however the test script when called through the browser still wont work, apache says: tail /my/apache/error_log [Tue Mar 30 23:11:46 2010] [notice] mod_fcgid: call /my/path/to/cybersource/index.php with wrapper /my/path/to/cybersource/php_fcgi/bin/php-cgi PHP Warning: PHP Startup: Unable to load dynamic library '/my/path/to/cybersource/extensionsdir/php5_cybersource.so' - libspapache.so: cannot open shared object file: No such file or directory in Unknown on line 0 so it cant find the linked file libspapache.so even though it is in the LD_LIBRARY_PATH that is supposedly defined i really appreciate the help. thanks so much.

    Read the article

  • Microsoft.Build.Engine Error (default targets): Target GetFrameworkPaths: Could not locate the .NET

    - by Mitchan Adams
    I am writing a webservice, that when called should build a C# project. I'm using the framework 2 reference, Microsoft.Buld.Engine and Microsoft.Build.Framework. If you look under the '<Import>' section .csproj file, by default it has: <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" /> which I then changed to: <Import Project="$(MSBuildBinPath)\Microsoft.CSharp.targets" /> My code to build the csproj is: Engine buildEngine = new Engine(Path.Combine(Environment.GetEnvironmentVariable("SystemRoot"), @"Microsoft.NET\Framework\v2.0.50727")); FileLogger logger = new FileLogger(); logger.Parameters = @"logfile=c:\temp\build.log"; buildEngine.RegisterLogger(logger); bool success = buildEngine.BuildProjectFile([Path_Of_Directory]+ "ProjectName.csproj"); buildEngine.UnregisterAllLoggers(); The success variable returns a false because the build faild. I then check the build.log file and this is the error I recieve: *Build started 3/17/2010 11:16:56 AM. ______________________________ Project "[Path_Of_Directory]\ProjectName.csproj" (default targets): Target GetFrameworkPaths: Could not locate the .NET Framework SDK. The task is looking for the path to the .NET Framework SDK at the location specified in the SDKInstallRootv2.0 value of the registry key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft.NETFramework. You may be able to solve the problem by doing one of the following: 1.) Install the .NET Framework SDK. 2.) Manually set the above registry key to the correct location. Target* I cant understand why it wont build. Any help will be much appreciated. Thanks

    Read the article

  • Using for or while loops

    - by Gary
    Every month, 4 or 5 text files are created. The data in the files is pulled into MS Access and used in a mailmerge. Each file contains a header. This is an example: HEADER|0000000130|0000527350|0000171250|0000058000|0000756600|0000814753|0000819455|100106 The 2nd field is the number of records contained in the file (excluding the header line). The last field is the date in the form yymmdd. Using gawk (for Windows), I've done ok with rearranging/modifying the data and writing it all out to a new file for importing into Access except for the following. I'm trying to create a unique ID number for each record. The ID number has the form 1mmddyyXXXX, where XXXX is a number, padded with leading zeros. Using the header above, the first record in the output file would get the ID number 10106100001 and the last record would get the ID 10106100130. I've tried putting the second field in the header into a variable, rearranging the last header field into the required date format and then looping with "for" statements to append the XXXX part of the ID and then outputting it all with printf but so far I've been complete rubbish at it. Thanks for your help! gary

    Read the article

  • ComboBox exception caused in winforms FormClosing event

    - by Spooky2010
    Using c# vs2008 winforms I have an application with a bunch of child winforms. Each time a form is closed I need to store the current selected value of a combobox that is on each form to a Global application variable so that I can track it and use it in new forms. The combobox is populated on form start via a method to set its datasource to an ArrayList of items What I have found is if the combobox is populated with items in the designer, and you try to get the combobox value in the form closing event, I always get a NullReferenceException. However if the comboBox has an datasource like I DO have in my application and I try to get the combobox value in the form closing event then I would say 95% of the time I DO NOT get the NullReferenceException, but I do get it 5% of the time. That ratio can even vary depending on what computer I run the application on. for example I have 1 computer where the exception always occurs. My question is therefore what is (the best) way to get the value of the combobox, last thing before the form closes without causing the exception. I would def prefer to do it last thing before the form closes rather than track it with every selected index change event. Any advice appreciated.

    Read the article

  • Implementing arrays using a stack

    - by Zack
    My programming language has no arrays, no lists, no pointers, no eval and no variable variables. All it has: Ordinary variables like you know them from most programming languages: They all have an exact name and a value. One stack. Functions provided are: push (add element to top), pop (remove element from top, get value) and empty (check if stack is empty) My language is turing-complete. (Basic arithmetics, conditional jumps, etc implemented) That means, it must be possible to implement some sort of list or array, right? But I have no idea how... What I want to achieve: Create a function which can retrieve and/or change an element x of the stack. I could easily add this function in the implementation of my language, in the interpreter, but I want to do it in my programming language. "Solution" one (Accessing an element x, counting from the stack top) Create a loop. Pop off the element from the stack top x times. The last element popped of is element number x. I end up with a destroyed stack. Solution two: Do the same as above, but store all popped off values in a second stack. Then you could move all elements back after you are done. But you know what? I don't have a second stack!

    Read the article

  • C#, sometimes I could flush down my boss the toilet [closed]

    - by msfanboy
    Hello all, I got a paper of instructions from my boss. One of the instructions is in this order: Extend the method GetProductIdBy with theShipmentDate Overload the method GetProductIdBy without theShipmentDate This is the Method I speak about: ...and theShipmentDate is a DateTime variable public IProduct GetProductIdBy(string productID) { ... return product; } You know what I did? this - public IProduct GetProductIdBy(string productID, DateTime theShipmentDate ) { ... return product; } You know what my boss said? The above is wrong! I asked him how can I overload a method without a parameter like theShipmentDate ??? That makes no sense, he said that reason in because of the subversion repository... what the fuck?? But he did not tell me whats really right I would have to find out for myself... he just didnt tell me and I am sick of asking him every crap if he cant express himself properly. How would you manage his instruction?

    Read the article

  • jQuery: script remember values between times it is triggered?

    - by Marius
    Hello there, I am writing an ajax script in jQuery. The script gets new or previous page from a php documents that returns HTML. If, located on page 1, I click next, the script IS able to find the next page number (page2), but when I click it AGAIN, the script again has to be able to find the next page number (page3) and at the minute it doesnt. I was wondering how I can save a variable between time a script is triggered, so that I can just + 1 to each time somebody clicks "next", and -1 when somebody clicks "previous". This is my code: $('.buttonNeste').click(function(event){ event.preventDefault(); if (page == null || id == null ) { var page = parseInt($(this).closest('.paginationFullWidth').attr('id')) + 1; var id = $(this).closest('.paginationFullWidth').siblings('.jtextfill').children('h1').attr('id'); } else { var page = page + 1; } var target = $(this); $.post( 'http://www.example.com/controllers/foo.php', { 'page': ( page ), 'id': id }, function(data) { $(target).closest('.paginationFullWidth').siblings('.commentsContainer').html(data); }); }); Thank you for your time. Kind regards, Marius

    Read the article

  • In C# should I reuse a function / property parameter to compute temp result or create a temporary v

    - by Hamish Grubijan
    The example below may not be problematic as is, but it should be enough to illustrate a point. Imagine that there is a lot more work than trimming going on. public string Thingy { set { // I guess we can throw a null reference exception here on null. value = value.Trim(); // Well, imagine that there is so much processing to do this.thingy = value; // That this.thingy = value.Trim() would not fit on one line ... So, if the assignment has to take two lines, then I either have to abusereuse the parameter, or create a temporary variable. I am not a big fan of temporary variables. On the other hand, I am not a fan of convoluted code. I did not include an example where a function is involved, but I am sure you can imagine it. One concern I have is if a function accepted a string and the parameter was "abused", and then someone changed the signature to ref in both places - this ought to mess things up, but ... who would knowingly make such a change if it already worked without a ref? Seems like it is their responsibility in this case. If I mess with the value of value, am I doing something non-trivial under the hood? If you think that both approaches are acceptable, then which do you prefer and why? Thanks.

    Read the article

  • Opencv application crashes at runtime with error code 0x0000142

    - by Tuan Anh
    I have openCV and minGW installed with codeblock IDE following the instructions found here http://kevinhughes.ca/tutorials/opencv-install-on-windows-with-codeblocks-and-mingw/ i tried the simple image loading program in the article and the build process went fine. but when i tried running the output program, it crashes with the error message "the application was unable to start correctly (0xc0000142). Click OK to close the application." I used Dependency Walker to see if the program failed to load dll module and here's the output screen of Dependency Walker https://www.dropbox.com/s/f9iaftdt8atjwpl/Screenshot%202013-11-05%2022.21.45.png i am not used to DW but as i can see in its output screen, some openCV dll failed to load and the loaded Windows DLL were 64 bit instead of 32 bit (as minGW is 32 bit). I can't figure out why as i already configure the Path environment variable for the bin directory of openCV and the app still can not load the dll modules. And i think that Windows will automatically load the proper 32 bit DLLs when a 32 bit app is run but this situation the app still failed to load. Anyone has ideas?

    Read the article

  • SqlBulkCopy causes Deadlock on SQL Server 2000.

    - by megatoast
    I have a customized data import executable in .NET 3.5 which the SqlBulkCopy to basically do faster inserts on large amounts of data. The app basically takes an input file, massages the data and bulk uploads it into a SQL Server 2000. It was written by a consultant who was building it with a SQL 2008 database environment. Would that env difference be causing this? SQL 2000 does have the bcp utility which is what BulkCopy is based on. So, When we ran this, it triggered a Deadlock error. Error details: Transaction (Process ID 58) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction. I've tried numerous ways to try to resolve it. like temporarily setting the connection string variable MultipleActiveResultSets=true, which wasn't ideal, but it still gives a Deadlock error. I also made sure it wasn't a connection time out problem. here's the function. Any advice? /// <summary> /// Bulks the insert. /// </summary> public void BulkInsert(string destinationTableName, DataTable dataTable) { SqlBulkCopy bulkCopy; if (this.Transaction != null) { bulkCopy = new SqlBulkCopy ( this.Connection, SqlBulkCopyOptions.TableLock, this.Transaction ); } else { bulkCopy = new SqlBulkCopy ( this.Connection.ConnectionString, SqlBulkCopyOptions.TableLock | SqlBulkCopyOptions.UseInternalTransaction ); } bulkCopy.ColumnMappings.Add("FeeScheduleID", "FeeScheduleID"); bulkCopy.ColumnMappings.Add("ProcedureID", "ProcedureID"); bulkCopy.ColumnMappings.Add("AltCode", "AltCode"); bulkCopy.ColumnMappings.Add("AltDescription", "AltDescription"); bulkCopy.ColumnMappings.Add("Fee", "Fee"); bulkCopy.ColumnMappings.Add("Discount", "Discount"); bulkCopy.ColumnMappings.Add("Comment", "Comment"); bulkCopy.ColumnMappings.Add("Description", "Description"); bulkCopy.BatchSize = dataTable.Rows.Count; bulkCopy.DestinationTableName = destinationTableName; bulkCopy.WriteToServer(dataTable); bulkCopy = null; }

    Read the article

  • Valgrind says "stack allocation," I say "heap allocation"

    - by Joel J. Adamson
    Dear Friends, I am trying to trace a segfault with valgrind. I get the following message from valgrind: ==3683== Conditional jump or move depends on uninitialised value(s) ==3683== at 0x4C277C5: sparse_mat_mat_kron (sparse.c:165) ==3683== by 0x4C2706E: rec_mating (rec.c:176) ==3683== by 0x401C1C: age_dep_iterate (age_dep.c:287) ==3683== by 0x4014CB: main (age_dep.c:92) ==3683== Uninitialised value was created by a stack allocation ==3683== at 0x401848: age_dep_init_params (age_dep.c:131) ==3683== ==3683== Conditional jump or move depends on uninitialised value(s) ==3683== at 0x4C277C7: sparse_mat_mat_kron (sparse.c:165) ==3683== by 0x4C2706E: rec_mating (rec.c:176) ==3683== by 0x401C1C: age_dep_iterate (age_dep.c:287) ==3683== by 0x4014CB: main (age_dep.c:92) ==3683== Uninitialised value was created by a stack allocation ==3683== at 0x401848: age_dep_init_params (age_dep.c:131) However, here's the offending line: /* allocate mating table */ age_dep_data->mtable = malloc (age_dep_data->geno * sizeof (double *)); if (age_dep_data->mtable == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); for (int j = 0; j < age_dep_data->geno; j++) { 131=> age_dep_data->mtable[j] = calloc (age_dep_data->geno, sizeof (double)); if (age_dep_data->mtable[j] == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); } What gives? I thought any call to malloc or calloc allocated heap space; there is no other variable allocated here, right? Is it possible there's another allocation going on (the offending stack allocation) that I'm not seeing? You asked to see the code, here goes: /* Copyright 2010 Joel J. Adamson <[email protected]> $Id: age_dep.c 1010 2010-04-21 19:19:16Z joel $ age_dep.c:main file Joel J. Adamson -- http://www.unc.edu/~adamsonj Servedio Lab University of North Carolina at Chapel Hill CB #3280, Coker Hall Chapel Hill, NC 27599-3280 This file is part of an investigation of age-dependent sexual selection. This code is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with haploid. If not, see <http://www.gnu.org/licenses/>. */ #include "age_dep.h" /* global variables */ extern struct argp age_dep_argp; /* global error message variables */ char * nullmsg = "Null pointer: %i"; /* error message for conversions: */ char * errmsg = "Representation error: %s"; /* precision for formatted output: */ const char prec[] = "%-#9.8f "; const size_t age_max = AGEMAX; /* maximum age of males */ static int keep_going_p = 1; int main (int argc, char ** argv) { /* often used counters: */ int i, j; /* read the command line */ struct age_dep_args age_dep_args = { NULL, NULL, NULL }; argp_parse (&age_dep_argp, argc, argv, 0, 0, &age_dep_args); /* set the parameters here: */ /* initialize an age_dep_params structure, set the members */ age_dep_params_t * params = malloc (sizeof (age_dep_params_t)); if (params == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); age_dep_init_params (params, &age_dep_args); /* initialize frequencies: this initializes a list of pointers to initial frqeuencies, terminated by a NULL pointer*/ params->freqs = age_dep_init (&age_dep_args); params->by = 0.0; /* what range of parameters do we want, and with what stepsize? */ /* we should go from 0 to half-of-theta with a step size of about 0.01 */ double from = 0.0; double to = params->theta / 2.0; double stepsz = 0.01; /* did you think I would spell the whole word? */ unsigned int numparts = floor(to / stepsz); do { #pragma omp parallel for private(i) firstprivate(params) \ shared(stepsz, numparts) for (i = 0; i < numparts; i++) { params->by = i * stepsz; int tries = 0; while (keep_going_p) { /* each time through, modify mfreqs and mating table, then go again */ keep_going_p = age_dep_iterate (params, ++tries); if (keep_going_p == ERANGE) error (ERANGE, ERANGE, "Failure to converge\n"); } fprintf (stdout, "%i iterations\n", tries); } /* for i < numparts */ params->freqs = params->freqs->next; } while (params->freqs->next != NULL); return 0; } inline double age_dep_pmate (double age_dep_t, unsigned int genot, double bp, double ba) { /* the probability of mating between these phenotypes */ /* the female preference depends on whether the female has the preference allele, the strength of preference (parameter bp) and the male phenotype (age_dep_t); if the female lacks the preference allele, then this will return 0, which is not quite accurate; it should return 1 */ return bits_isset (genot, CLOCI)? 1.0 - exp (-bp * age_dep_t) + ba: 1.0; } inline double age_dep_trait (int age, unsigned int genot, double by) { /* return the male trait, a function of the trait locus, age, the age-dependent scaling parameter (bx) and the males condition genotype */ double C; double T; /* get the male's condition genotype */ C = (double) bits_popcount (bits_extract (0, CLOCI, genot)); /* get his trait genotype */ T = bits_isset (genot, CLOCI + 1)? 1.0: 0.0; /* return the trait value */ return T * by * exp (age * C); } int age_dep_iterate (age_dep_params_t * data, unsigned int tries) { /* main driver routine */ /* number of bytes for female frequencies */ size_t geno = data->age_dep_data->geno; size_t genosize = geno * sizeof (double); /* female frequencies are equal to male frequencies at birth (before selection) */ double ffreqs[geno]; if (ffreqs == NULL) error (ENOMEM, ENOMEM, nullmsg, __LINE__); /* do not set! Use memcpy (we need to alter male frequencies (selection) without altering female frequencies) */ memmove (ffreqs, data->freqs->freqs[0], genosize); /* for (int i = 0; i < geno; i++) */ /* ffreqs[i] = data->freqs->freqs[0][i]; */ #ifdef PRMTABLE age_dep_pr_mfreqs (data); #endif /* PRMTABLE */ /* natural selection: */ age_dep_ns (data); /* normalized mating table with new frequencies */ age_dep_norm_mtable (ffreqs, data); #ifdef PRMTABLE age_dep_pr_mtable (data); #endif /* PRMTABLE */ double * newfreqs; /* mutate here */ /* i.e. get the new frequency of 0-year-olds using recombination; */ newfreqs = rec_mating (data->age_dep_data); /* return block */ { if (sim_stop_ck (data->freqs->freqs[0], newfreqs, GENO, TOL) == 0) { /* if we have converged, stop the iterations and handle the data */ age_dep_sim_out (data, stdout); return 0; } else if (tries > MAXTRIES) return ERANGE; else { /* advance generations */ for (int j = age_max - 1; j < 0; j--) memmove (data->freqs->freqs[j], data->freqs->freqs[j-1], genosize); /* advance the first age-class */ memmove (data->freqs->freqs[0], newfreqs, genosize); return 1; } } } void age_dep_ns (age_dep_params_t * data) { /* calculate the new frequency of genotypes given additive fitness and selection coefficient s */ size_t geno = data->age_dep_data->geno; double w[geno]; double wbar, dtheta, ttheta, dcond, tcond; double t, cond; /* fitness parameters */ double mu, nu; mu = data->wparams[0]; nu = data->wparams[1]; /* calculate fitness */ for (int j = 0; j < age_max; j++) { int i; for (i = 0; i < geno; i++) { /* calculate male trait: */ t = age_dep_trait(j, i, data->by); /* calculate condition: */ cond = (double) bits_popcount (bits_extract(0, CLOCI, i)); /* trait-based fitness term */ dtheta = data->theta - t; ttheta = (dtheta * dtheta) / (2.0 * nu * nu); /* condition-based fitness term */ dcond = CLOCI - cond; tcond = (dcond * dcond) / (2.0 * mu * mu); /* calculate male fitness */ w[i] = 1 + exp(-tcond) - exp(-ttheta); } /* calculate mean fitness */ /* as long as we calculate wbar before altering any values of freqs[], we're safe */ wbar = gen_mean (data->freqs->freqs[j], w, geno); for (i = 0; i < geno; i++) data->freqs->freqs[j][i] = (data->freqs->freqs[j][i] * w[i]) / wbar; } } void age_dep_norm_mtable (double * ffreqs, age_dep_params_t * params) { /* this function produces a single mating table that forms the input for recombination () */ /* i is female genotype; j is male genotype; k is male age */ int i,j,k; double norm_denom; double trait; size_t geno = params->age_dep_data->geno; for (i = 0; i < geno; i++) { double norm_mtable[geno]; /* initialize the denominator: */ norm_denom = 0.0; /* find the probability of mating and add it to the denominator */ for (j = 0; j < geno; j++) { /* initialize entry: */ norm_mtable[j] = 0.0; for (k = 0; k < age_max; k++) { trait = age_dep_trait (k, j, params->by); norm_mtable[j] += age_dep_pmate (trait, i, params->bp, params->ba) * (params->freqs->freqs)[k][j]; } norm_denom += norm_mtable[j]; } /* now calculate entry (i,j) */ for (j = 0; j < geno; j++) params->age_dep_data->mtable[i][j] = (ffreqs[i] * norm_mtable[j]) / norm_denom; } } My current suspicion is the array newfreqs: I can't memmove, memcpy or assign a stack variable then hope it will persist, can I? rec_mating() returns double *.

    Read the article

  • How can I pass a html table row into DataTable.net fnAddData

    - by chobo2
    Hi I am using the DataTable.net plugin and I am wondering how can I add dynamically a row to a existing table? http://datatables.net/examples/api/add_row.html I am looking at this example and they have it like this /* Global variable for the DataTables object */ var oTable; /* Global var for counter */ var giCount = 2; $(document).ready(function() { oTable = $('#example').dataTable(); } ); function fnClickAddRow() { oTable.fnAddData( [ giCount+".1", giCount+".2", giCount+".3", giCount+".4" ] ); giCount++; } but I am wondering what happens if I want I have a table row already rendered? Say this is my table. <table border="1"> <tr> <td>row 1, cell 1</td> <td>row 1, cell 2</td> </tr> <tr> <td>row 2, cell 1</td> <td>row 2, cell 2</td> </tr> </table> Now I have this var newRow = '<tr><td>row 3, cell 1</td><td>row 3, cell 2</td></tr>'; How can I add it through addRow? I tried oTable.fnAddData(newRow); but that seems not to work. So I am not sure how to do this.

    Read the article

  • Equivalent of Flex DataBinding using Pure Actionscript

    - by Joshua
    What is the ActionScript equivalent of this? <mx:Label text="Hello {MyVar} World!"/> In ActionScript it would need it to look something like this: var StringToBind="Hello {MyVar} World!"; // I've Written It This Way Because I Don't Know The Exact Text To Be Bound At Design Time. [Bindable] var MyVar:String='Flex'; var Lab:Label=new Label(); Lab.text=??? ... SomeContainer.addChild(Lab); How can I accomplish this kind of "Dynamic" binding... Where I don't know the value of "StringToBind" until runtime? For the purposes of this question we can assume that I do know that any variable mentioned in "StringToBind", is guaranteed to exist at runtime. I already realize there are much more straightforward ways to accomplish this exact thing STATICALLY, and using only Flex. It's important for my project though that I understand how this could be accomplished using purely ActionScript.

    Read the article

  • 'memcache-client' problem - app can't load the gem

    - by Max Williams
    Hi all - i'm trying to get memcached and the Interlock plugin working with a new rails app. The weird thing is that they both work fine in another app on the same machine and i can't figure out the difference that's stopping this app. The new app is rails 2.3.4 and the old one is 2.2.2 in case that's a factor. When the app starts, i get a warning from interlock: `install_memcached':Interlock::ConfigurationError: 'memcache-client' client requested but not installed. Try 'sudo gem install memcache-client'. Now, i have memcache-client installed: $> gem list | grep memcache memcache-client (1.7.8) The gem is in /var/lib/gems/1.8, which is in my GEM_PATH variable. On a bit of further investigation, the above error is raised by interlock when it refers to the MemCache class, which doesn't exist and so raises an 'anonymous module' error. So, ultimately, the problem is that MemCache isn't loaded. I have a memcached.yml in my config folder (below) however. I'm stuck - any advice anyone? #contents of config/memcached.yml defaults: namespace: millionaire #sessions: true sessions: false client: memcache-client with_finders: true development: servers: - 127.0.0.1:11211 production: servers: - 127.0.0.1:11211

    Read the article

  • PHP cURL JSON Decode (X-AUTH Header)

    - by TheCyX
    <?php // Show Profile $curl = curl_init(); curl_setopt ($curl, CURLOPT_URL, "https://example/api"); curl_setopt ($curl, CURLOPT_RETURNTRANSFER, true); curl_setopt ($curl, CURLOPT_HTTPAUTH, CURLAUTH_BASIC ) ; curl_setopt ($curl, CURLOPT_HTTPHEADER, array('X-AUTH: 123456789')); $projects = curl_exec($curl); // This is empty? echo $projects; //Decode $phpArray = json_decode($projects); print_r($phpArray); foreach ($phpArray as $key => $value) { // Line 17, sure its empty, but why? echo "<p>$key | $value</p>"; } ?> Warning: Invalid argument supplied for foreach() in /html/api.php on line 17 The API needs this authentification: $ curl -i -H "X-AUTH: 123456789" https://example/api JSON File: {"id":"123456","hostId":null,"Nickname":"thecyx","DisplayName":"thecyx","AppDisplayName":"thecyx","Score":"300","Account":"Full"} The $project variable is empty. If I'm posting the API Url in the Broswer its working. And, if possible, what's the correct way to get the JSON Data e.g. [Nickname],[Score]?

    Read the article

  • Importing Variables from PHP 4 into Flash

    - by Glenn
    I'm trying to get variable importing from a PHP script before I implement it into a larger project. So far all I've gotten is headaches. //this is all thats in test.php other than the open and close brackets. Normally I'd have it doing a mysql_query and putting useful information into the print statement. print( "lamegame.net/test/test.php?val=foo&id=0000&name=Glenn"); All test.as has to do is access the three variables. The problem comes in that 'val' is undefined. The id and name variables however are just fine and return 0000 and Glenn respectively. package { import flash.display.MovieClip; import flash.text.TextField; import flash.events.; import flash.net.; public class test extends MovieClip { public function test() { super(); //prep request var request:URLRequest = new URLRequest("test.php"); request.method = URLRequestMethod.GET; var loader:URLLoader = new URLLoader(); //load request loader.dataFormat = URLLoaderDataFormat.VARIABLES; loader.addEventListener(Event.COMPLETE, dataLoaded); loader.load(request); } public function dataLoaded(e:Event):void { var name = e.target.data.name; var id = e.target.data.id; var val = e.target.data.val; trace("Val: " + val + "ID: " + id + " Name: " + name); } } }

    Read the article

  • Singleton Roles in Moose

    - by mjn12
    I am attempting to write a singleton role using Perl and Moose. I understand a MooseX::Singleton module is available but there is always resistance when requiring another CPAN module for our project. After trying this and having a little trouble I would like to understand WHY my method is not working. The singleton role I have written is as follows: package Singleton; use Moose::Role; my $_singleInstance; around 'new' => sub { my $orig = shift; my $class = shift; if (not defined $_singleInstance ){ $_singleInstance = $class->$orig(@_); } return $_singleInstance; }; sub getInstance { return __PACKAGE__->new(); } 1; This appears to work find when only one class uses the singleton role. However when two classes (ClassA and ClassB for example) both consume the Singleton role it appears as they are both referring to a shared $_singleInstance variable. If I call ClassA-getInstance it returns a reference to a ClassA object. If I call ClassB-getInstance sometime later in the same script it returns a reference to an object of type ClassA (even though I clearly called the getInstance method for ClassB). If I dont use a role and actually copy and paste the code from the Singleton role into ClassA and ClassB it appears to work fine. Whats going on here?

    Read the article

  • Binary Search Tree in Java

    - by John R
    I want to make a generic BST, that can be made up of any data type, but i'm not sure how I could add things to the tree, if my BST is generic. All of my needed code is below. I want my BST made up of Locations, and sorted by the x variable. Any help is appreciated. Major thanks for looking. public void add(E element) { if (root == null) root = element; if (element < root) add(element, root.leftChild); if (element > root) add(element, root.rightChild); else System.out.println("Element Already Exists"); } private void add(E element, E currLoc) { if (currLoc == null) currLoc = element; if (element < root) add(element, currLoc.leftChild); if (element > root) add(element, currLoc.rightChild); else System.out.println("Element Already Exists); } Other Code public class BinaryNode<E> { E BinaryNode; BinaryNode nextBinaryNode; BinaryNode prevBinaryNode; public BinaryNode() { BinaryNode = null; nextBinaryNode = null; prevBinaryNode = null; } } public class Location<AnyType> extends BinaryNode { String name; int x,y; public Location() { name = null; x = 0; y = 0; } public Location(String newName, int xCord, int yCord) { name = newName; x = xCord; y = yCord; } public int equals(Location otherScene) { return name.compareToIgnoreCase(otherScene.name); } }

    Read the article

< Previous Page | 402 403 404 405 406 407 408 409 410 411 412 413  | Next Page >