Search Results

Search found 1525 results on 61 pages for 'pair'.

Page 41/61 | < Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >

  • Is there a language or design pattern that allows the *removal* of object behavior or properties in a class hierarchy?

    - by Sebastien Diot
    A well-know shortcoming of traditional class hierarchies is that they are bad when it comes to model the real world. As an example, trying to represent animals species with classes. There are actually several problems when doing that, but one that I never saw a solution to is when a sub-class "looses" a behavior or properties that was defined in a super-class, like a penguin not being able to fly (there are probably better examples, but that's the first one that comes to my mind, having seen "Madagascar 2" recently). On the one hand, you don't want to define for every property and behavior some flag that specifies if it is at all present, and check it every time before accessing that behavior or property. You would just like to say that birds can fly, simply and clearly, in the Bird class. But then it would be nice if one could define "exceptions" afterward, without having to use some horrible hacks everywhere. This often happens when a system has been productive for a while. You suddenly find an "exception" that doesn't fit in the original design at all, and you don't want to change a large portion of your code to accommodate it. So, is there some language or design patterns that can cleanly handle this problem, without requiring major changes to the "super-class", and all the code that uses it? Even if a solution only handle a specific case, several solutions might together form a complete strategy. [EDIT] Forgot about the Liskov Substitution Principle. That is why you can't do it. Assuming you define "traits/interfaces" for all major "feature groups", you can freely implement traits in different branches of the hierarchy, like the Flying trait could be implemented by Birds, and some special kind of squirrels and fish. So my question could amount to "How could I un-implement a trait?" If your super-class is a Java Serializable, you have to be one too, even if there is no way for you to serialize your state, for example if you contained a "Socket". So one way to do it is to always define all your traits in pair from the start: Flying and NotFlying (which would throw UnsupportedOperationExceiption, if not checked against). The Not-trait would not define any new interface, and could be simply checked for. Sounds like a "cheap" solution, in particular if used from the start.

    Read the article

  • Organizing Git repositories with common nested sub-modules

    - by André Caron
    I'm a big fan of Git sub-modules. I like to be able to track a dependency along with its version, so that you can roll-back to a previous version of your project and have the corresponding version of the dependency to build safely and cleanly. Moreover, it's easier to release our libraries as open source projects as the history for libraries is separate from that of the applications that depend on them (and which are not going to be open sourced). I'm setting up workflow for multiple projects at work, and I was wondering how it would be if we took this approach a bit of an extreme instead of having a single monolithic project. I quickly realized there is a potential can of worms in really using sub-modules. Supposing a pair of applications: studio and player, and dependent libraries core, graph and network, where dependencies are as follows: core is standalone graph depends on core (sub-module at ./libs/core) network depdends on core (sub-module at ./libs/core) studio depends on graph and network (sub-modules at ./libs/graph and ./libs/network) player depends on graph and network (sub-modules at ./libs/graph and ./libs/network) Suppose that we're using CMake and that each of these projects has unit tests and all the works. Each project (including studio and player) must be able to be compiled standalone to perform code metrics, unit testing, etc. The thing is, a recursive git submodule fetch, then you get the following directory structure: studio/ studio/libs/ (sub-module depth: 1) studio/libs/graph/ studio/libs/graph/libs/ (sub-module depth: 2) studio/libs/graph/libs/core/ studio/libs/network/ studio/libs/network/libs/ (sub-module depth: 2) studio/libs/network/libs/core/ Notice that core is cloned twice in the studio project. Aside from this wasting disk space, I have a build system problem because I'm building core twice and I potentially get two different versions of core. Question How do I organize sub-modules so that I get the versioned dependency and standalone build without getting multiple copies of common nested sub-modules? Possible solution If the the library dependency is somewhat of a suggestion (i.e. in a "known to work with version X" or "only version X is officially supported" fashion) and potential dependent applications or libraries are responsible for building with whatever version they like, then I could imagine the following scenario: Have the build system for graph and network tell them where to find core (e.g. via a compiler include path). Define two build targets, "standalone" and "dependency", where "standalone" is based on "dependency" and adds the include path to point to the local core sub-module. Introduce an extra dependency: studio on core. Then, studio builds core, sets the include path to its own copy of the core sub-module, then builds graph and network in "dependency" mode. The resulting folder structure looks like: studio/ studio/libs/ (sub-module depth: 1) studio/libs/core/ studio/libs/graph/ studio/libs/graph/libs/ (empty folder, sub-modules not fetched) studio/libs/network/ studio/libs/network/libs/ (empty folder, sub-modules not fetched) However, this requires some build system magic (I'm pretty confident this can be done with CMake) and a bit of manual work on the part of version updates (updating graph might also require updating core and network to get a compatible version of core in all projects). Any thoughts on this?

    Read the article

  • Why wearing Jeans is considered unprofessional?

    - by Gopinath
    When I started my career 9 years ago I use to wear casual wear to office – Jeans & T-Shirts all the 5 days. The environment at workplace during those days encouraged me to be casual and many of my colleagues use to come in Jeans. We just started our career those days it was perfectly fine to be in casual. As I grow up in the ladder, I started feeling the discomfort of wearing Jeans at work. During clients visits, senior managers meetings and consultations I was an odd man in the crowd as the rest of them are in formals. In order to be one among the professionals I’m forced change my dressing style and start wearing formals. But  the question of “Why wearing jeans to workplace is considered as unprofessional?” use in linger in my mind till today. I got the answer to my question from a discussion thread on Quora When they were invented, jeans were associated with blue-collar work. They were meant to get muddy and gross and take lots of abuse without falling apart, even if you wore the same pair every day. The people who bought them were the ones whose lives required durable clothing. And another commenter says… A professional image is critical to cementing business relationships, and part of that is, for right or wrong, how you dress. Jeans are typically associated with "kicking back", relaxation, leisure, informality,  and even a slightly rebellious flavor. The style and condition of the jeans are a consideration, as we often wear jeans into advanced states of being worn down, with tearing, etc.. that we generally do not do with other clothing items. I agree with this theory even though it may be centuries old. If you want to look like a professional and treated like a professional it’s better to be dress up in formals. These days I make a point to be in formals at workplace. Not everyone is Steve Jobs to wear a Jean & Turtle Neck T-shirt  right? CC Image credit flickr/exey

    Read the article

  • Why am I getting a "network is unreachable" error on Ubuntu Server?

    - by jason328
    I'm a completely new to Ubuntu server and am having a hard time connecting the server to the internet. I first ran ping -n 8.8.8.8 connect:Network is unreachable Then I ran ifconfig Link encap:Local Loopback inet addr:127.0.0.1 Mask 255.0.0.0 inet6 addr: ::1/28Scope:host UP LOOPBACK RUNNING MTU:16436 RX packets:192 errors:0 dropped:0 overruns:0 frame:0 TX packets:192 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:15360 (15.2KB) TX bytes:15360 (15.3KB) Here is ouput for sudo lspci -n 00:00.0 0600: 8086:2580 (rev 04) 00:02.0 0300: 8086:2582 (rev 04) 00:1d.0 0c03: 8086:2658 (rev 03) 00:1d.1 0c03: 8086:2659 (rev 03) 00:1d.0 0c03: 8086:265a (rev 03) 00:1d.0 0c03: 8086:265b (rev 03) 00:1d.0 0c03: 8086:265c (rev 03) 00:1e.0 0604: 8086:244e (rev d3) 00:1e.0 0401: 8086:266e (rev 03) 00:1f.0 0601: 8086:2640 (rev 03) 00:1f.0 0101: 8086:2651 (rev 03) 00:1f.0 0c05: 8086:266a (rev 03) 00:0b.0 0200: 8086:1654 (rev 03) lshw-c network returns WARNING: you should run this program as super-user. *-network DISABLED description:Ethernet interface product: NetXtreme BCM5705_2 Gigabit Ethernet vender: Broadcom Corporation physical id:b bus info:pci@0000:0a:0b.0 logical name: eth0 capabilities: bus_master_cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion= 3.121 firmware=5705-v3.18 latency=32 mingnt=64 multicast=yes port=twister pair lsmod code returned this Module Size Used By e100 37213 0 dm_crypt 23125 1 ppdev 17113 0 psmouse 87603 0 snd_intel8x0 38570 0 snd_ac97_codec 134826 1 snd_intel8x0 ac97_bus 12730 1 snd_ac97_codec snd_pcm 97188 2 snd_intel8x0, snd_ac97_codec serio_raw 13211 0 snd_timer 29990 1 snd_pcm snd 78855 4 snd_intel8x0, snd_ac97_codec, snd_pcm,snd_timer soundcore 15091 1 snd snd_page_alloc 18529 2 snd_intel8x0, snd_pcm ext2 73795 1 parport_pc 32866 1 mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev, parport_pc,lp usbhid 47199 0 hid 99559 1 usbhid tg3 152032 0 i915 468651 1 floppy 70365 0 drm_kms_helper 46978 1 i915 drm 242038 2 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 video 19596 1 i915 Again there is more but it's giving info on the driver itself. I know it works, I've used it. I assume then that my network got disabled when I installed Ubuntu Server. How do I enable it? I checked and the internet cable is connected to the D-link router. I have also used this same computer for internet access when I had Ubuntu Desktop installed so internet does work.

    Read the article

  • Wireless not working on Dell Inspirion 1501 after upgrading to Ubuntu 12.04 tried steps in other threads

    - by mark burton
    I updated to Ubuntu 12.04 and now my wireless is not working. No icon for it. Tried some of the troubleshooting in other threads but can't get it to work. Would really appreciate any help Thanks! " *-network description: Network controller product: BCM4311 802.11a/b/g vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 01 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:c0200000-c0203fff *-network description: Ethernet interface product: BCM4401-B0 100Base-TX vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 02 serial: 00:19:b9:5c:d1:52 size: 100Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=b44 driverversion=2.0 duplex=full ip=10.0.0.6 latency=64 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:21 memory:c0300000-c0301fff " lsub results Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 046d:c526 Logitech, Inc. Nano Receiver $ lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RS480 Host Bridge (rev 10) 00:01.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:05.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS480 PCI Bridge 00:12.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA 00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0) 00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1) 00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2) 00:13.3 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3) 00:13.4 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4) 00:13.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI) 00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 13) 00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB600 IDE 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge 00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS482 [Radeon Xpress 200M] 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11a/b/g (rev 01) 08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 08:01.0 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 08:01.1 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 01) rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • Evaluating Scrum - is it okay to have people with multiple roles in a Scrum team?

    - by Wayne M
    I'm evaluating some Agile-style methodologies for possible introduction to my team. With Scrum, is it allowable to have the same person perform multiple roles? We have a small team of four developers and a web designer; we don't really have a lead (I fulfill this role), QA testers or business analysts, and all of our development tasks come from the CIO. Automated testing is seen as a total waste of time, and everything focuses on speed and not quality. What will happen is the CIO will come up with a development task (whether a feature or a bug) and give it to a developer (not to the whole team, to an individual, often in private or out of the blue) who is then expected to get it completed. The CIO doesn't gather requirements beyond the initial idea (and this has bitten us before as we'll implement something only to find out that none of the end users can use the feature, because they weren't consulted or even informed about it before we developed it, and in a panic we'll be told to revert the change) but requires say in/approval of everything that we do. First things first, is a Scrum style something to consider to introduce some standards and practices? From reading, Scrum seems to rely on a bit more trust and communication and focuses more on project management than on development, which is something we are completely devoid of as we don't have any semblance of project management at present. Second, if it can work is it unreasonable for someone, let's say myself, to act as both ScrumMaster and a developer? Or for a developer to also be the Product Owner (although chances are this will be the CIO, who isn't a developer)? I realize the Scrum Master and the Product Owner should be different people but at the same time I don't think we have anyone who has the qualities of a Product Owner (chances are it would turn into a "I need all these stories, I don't care how but get it done" type of deal and/or any freeze would be unfrozen on a whim). It seems to me that I might need to pick and choose pieces of Scrum/XP/Lean to compensate for how things are done currently, as it's highly unlikely that the mentality can be changed; for instance Pair Programming would never fly (seen as a waste, you get half the tasks done if you need two people for everything), TDD would be a hard sell, but short cycles would be welcomed.

    Read the article

  • Introducing Agile development after traditional project inception

    - by Riggy
    About a year and a half ago, I entered a workplace that claimed to do Agile development. What I learned was that this place has adopted several agile practices (such as daily standups, sprint plannings and sprint reviews) but none of the principles (just in time / just good enough mentality, exposing failure early, rich communication). I've now been tasked with making the team more agile and I've been assured that I have complete buy-in from the devs and the business team. As a pilot program, they've given me a project that just completed 15 months of requirements gathering, has a 110 page Analysis & Design document (to be considered as "written in stone"), and where I have no access to the end users (only to the committee made up of the users' managers who won't actually be using the product). I started small, giving them a list of expected deliverables for the first 5 sprints (leaving the future sprints undefined), a list of goals for the first sprint, and I dissected the A&D doc to get enough user stories to meet the first sprint's goals. Since then, they've asked why we don't have all the requirements for all the sprints, why I haven't started working on stuff for the third sprint (which they consider more important but is based off of the deliverables of the first 2 sprints) and are pressing for even more documentation that my entire IT team considers busy-work or un-related to us (such as writing the user manual up-front, documenting all the data fields from all the sprints up front, and more "up-front" work). This has been pretty rough for me as a new project manager, but there are improvements I have effectively implemented such as scrumban for story management, pair programming, and having the business give us customer acceptance tests up front (as part of the requirements documentation). So my questions are: What can I do to more effectively introduce change to a resistant business? Are there other practices that I can introduce on the IT side to help show the business the benefits of agile? The burden of documentation is strangling us - the business still sees it as a risk management strategy instead of as a risk. What can we do to alleviate their documentation concerns and demands (specifically the quantity of documentation and their need for all of it up front)? We are in a separate building from our business, about 3 blocks away and they refuse to have their people on the project co-habitate b/c that person "won't be able to work on their other projects while they're at our building." They expect us to always go over there and to bundle our questions so that we can ask them all at once and not waste that person's time with "constant interruptions." What can we do to get richer communication from them? Any additional advice would also be appreciated. Thanks!

    Read the article

  • Play or Lift: which one is more explicit?

    - by Andrea
    I am going to investigate web development with Scala, and the choice is between learning Lift or Play: probably I will not have enough time to try both, at least at first. Now, many comparisons between the two are available on the internet, but I would like to know how do they compare with respect to being explicit and involving less magic. Let me explain what I mean by example. I have used, to various degrees, CakePHP, symfony2, Django and Grails. I feel a very clear distinction between Django and symfony2, which are very explicit about what you are doing, and Grails and CakePHP, which try to do their best to guess what you are trying to achieve and often feel "magical". Let me give some examples comparing Django and Grails. In Django, views are functions that take a request as input and return a response. You can instantiate explicitly an instance of HttpResponse and populate its body with a string, or you can use shortcut functions to leverage the template system. In any case the return value from your view always has the same type. In contrast, the render method from Grails is highly polymorphic. You can throw a context at it and it will try to render a template which is found by convention using that context. Or you can pass it a pair of a template path and a context and that will work too. Or a string. Or XML. Grails tries hard to make sense of whatever you return from your controller. In the Django ORM, each model class has a static attribute representing the manager for that class. That manager exposes a fluent interface to build querysets. In Grails, you can have a similar functionality by composing detached criteria. Still, the most common way to query objects seems to be the use of runtime-generated methods like FindUserByEmailNotNull or FindPostByDateGreaterThan. I will not go further, but my point is that in Django-like frameworks you have control over the whole flow of the request/response process, while in Grails-like ones I feel I only have to feel the blanks and the framework will manage the rest of the flow for me. This is not to criticize Grails or CakePHP; which type you prefer is mainly a matter of preference. In fact, I happen to like some aspects of Grails, but I feel more comfortable with a framework which does less for me. Back to the point of the question: which one among Play and Lift is more explicit about what you do and which one tries to simplify more what you have to do with a layer of "magic"?

    Read the article

  • Is it okay to have people with multiple roles in a Scrum team?

    - by Wayne M
    I'm evaluating some Agile-style methodologies for possible introduction to my team. With Scrum, is it allowable to have the same person perform multiple roles? We have a small team of four developers and a web designer; we don't really have a lead (I fulfill this role), QA testers or business analysts, and all of our development tasks come from the CIO. Automated testing is seen as a total waste of time, and everything focuses on speed and not quality. What will happen is the CIO will come up with a development task (whether a feature or a bug) and give it to a developer (not to the whole team, to an individual, often in private or out of the blue) who is then expected to get it completed. The CIO doesn't gather requirements beyond the initial idea (and this has bitten us before as we'll implement something only to find out that none of the end users can use the feature, because they weren't consulted or even informed about it before we developed it, and in a panic we'll be told to revert the change) but requires say in/approval of everything that we do. First things first, is a Scrum style something to consider to introduce some standards and practices? From reading, Scrum seems to rely on a bit more trust and communication and focuses more on project management than on development, which is something we are completely devoid of as we don't have any semblance of project management at present. Second, if it can work is it unreasonable for someone, let's say myself, to act as both ScrumMaster and a developer? Or for a developer to also be the Product Owner (although chances are this will be the CIO, who isn't a developer)? I realize the Scrum Master and the Product Owner should be different people but at the same time I don't think we have anyone who has the qualities of a Product Owner (chances are it would turn into a "I need all these stories, I don't care how but get it done" type of deal and/or any freeze would be unfrozen on a whim). It seems to me that I might need to pick and choose pieces of Scrum/XP/Lean to compensate for how things are done currently, as it's highly unlikely that the mentality can be changed; for instance Pair Programming would never fly (seen as a waste, you get half the tasks done if you need two people for everything), TDD would be a hard sell, but short cycles would be welcomed.

    Read the article

  • Is there an API for determining congressional districts?

    - by ardavis
    I'm looking to determine the congressional district based on an address my user is providing. This will avoid having the user to look it up themselves. Does an API of this sort exist? Note Through my attempts to find one, I've only come across these: http://www.govtrack.us/developers/api (not sure how to submit an an address or zip code however) The following resources are available in the API ...Bills and resolutions in the U.S. Congress since 1973 (the 93rd Congress). ...A (bill, person) pair indicating cosponsorship, with join and withdrawn dates. ...Members of Congress and U.S. Presidents since the founding of the nation. ...Terms held in office by Members of Congress and U.S. Presidents. Each term corresponds with an election, meaning each term in the House covers two years (one 'Congress'), as President four years, and in the Senate six years (three 'Congresses'). ...Roll call votes in the U.S. Congress since 1789. How people voted is accessed through the Vote_voter API. ...How people voted on roll call votes in the U.S. Congress since 1789. See the Vote API. Filter on the vote field to get the results of a particular vote... http://www.opencongress.org/api (seems to be a way to find congress information, but not districts) This API provides programmers with structured access to all the data on OpenCongress, everything from official bill info to news and blog coverage to user-generated votes on bills and much more... This API defaults to returning XML. All queries can also return JSON... https://groups.google.com/forum/?fromgroups=#!topic/opendems-discuss/CeKyi_aANaE (similar question, no resolution) I've been looking over Open Dems, and seeing what's exposed at this point and what isn't. I work with Democrats Abroad, and am interested in using stuff from the lab for their sites. I quickly looked over the Precinct API, which does both more and less than what I'd need. An ideal resource would be any way of translating addresses into CD at the very least (getting state district data would be good as well), since that would make it easier for DA's membership to make a difference in races like last month's NY26 race... Update I'm looking at the source for the govtrack.us website and the 'doGeoCode' function may be useful. view-source:http://www.govtrack.us/congress/members If no one has any suggestions, I will try to go off of what they are doing.

    Read the article

  • How to set up an rsync backup to Ubuntu securely?

    - by ws_e_c421
    I have been following various other tutorials and blog posts on setting up a Ubuntu machine as a backup "server" (I'll call it a server, but it's just running Ubuntu desktop) that I push new files to with rsync. Right now, I am able to connect to the server from my laptop using rsync and ssh with an RSA key that I created and no password prompt when my laptop is connected to my home router that the server is also connected to. I would like to be able to send files from my laptop when I am away from home. Some of the tutorials I have looked at had some brief suggestions about security, but they didn't focus on them. What do I need to do to let my laptop with send files to the server without making it too easy for someone else to hack into the server? Here is what I have done so far: Ran ssh-keygen and ssh-copy-id to create a key pair for my laptop and server. Created a script on the server to write its public ip address to a file, encrypt the file, and upload to an ftp server I have access to (I know I could sign up for a free dynamic DNS account for this part, but since I have the ftp account and don't really need to make the ip publicly accessible I thought this might be better). Here are the things I have seen suggested: Port forwarding: I know I need to assign the server a fixed ip address on the router and then tell the router to forward a port or ports to it. Should I just use port 22 or choose a random port and use that? Turn on the firewall (ufw). Will this do anything, or will my router already block everything except the port I want? Run fail2ban. Are all of those things worth doing? Should I do anything else? Could I set up the server to allow connections with the RSA key only (and not with a password), or will fail2ban provide enough protection against malicious connection attempts? Is it possible to limit the kinds of connections the server allows (e.g. only ssh)? I hope this isn't too many questions. I am pretty new to Ubuntu (but use the shell and bash scripts on OSX). I don't need to have the absolute most secure set up. I'd like something that is reasonably secure without being so complicated that it could easily break in a way that would be hard for me to fix.

    Read the article

  • Windows7 - “The specified network password is not correct.” when the password is in fact correct.

    - by Win7 Home User
    I have a samba server setup for some time now. It is a Hardware NAS - which unfortunately does not provide access to the Samba logs. (the exact model of the NAS is called Addonics NAS Adapter ) I also have a Windows Vista and a Windows XP machine - from both I am able to map \\192.168.0.20\Smd with no errors ( net use l: \\192.168.0.20\Smd works, after asking for my username and password). I also bought a brand new computer, with Windows 7, and when I try to execute the same exact net use command on it - using the exact same username/password pair, I get a "The specified network password is not correct." message. I also tried mapping from the Windows explorer menu, and got the same error. I synchronized the clocks of the two machines, tried again... and yet the same error persists. So what is really surprising here is that mapping works from WindowXP and Windows Vista machines, but fails from a Windows7 machine using the exact same command and username/password - Anyone has any idea of what could be causing this or how to solve the problem? Thanks

    Read the article

  • psexec: "Access is Denied"?

    - by Electrons_Ahoy
    Inspired by my previous question here, I've been experimenting with PSExec. The goal is to trip off some fairly simple scripts / programs on one WindowsXP machine from another, and as PowerShell 2 doesn't yet do remoting on XP, PSexec seems like it'll solve my problems nicely. However, I can't get anything but the "Access is Denied" error. Here's what I've tried so far: I've got a pair of WindowsXP MCE machines, networked together in a workgroup without a server or domain controller. I've turned off "simple file sharing" on both machines. Under the security policy, Network Access: Sharing and Security model for local accounts is set to Classic, not Guest for both machines. There is an Administrative user for each computer that I know the passwords to. :) With all that, a command like "> psexec \\otherComputer -u adminUser cmd" prompts for the password (like it should) and then exits with: Couldn't access otherComputer: Access is denied. So, at this point I turn to the community. What step am I missing here?

    Read the article

  • Is anyone using KVM in production?

    - by Andy Shellam
    I've been trying to set up a pair of servers utilising KVM on Ubuntu 9.10 to host 8 virtual machines between them and ended up with various issues from the VMs freezing, to not powering on. I had one virtual server set up and running and was setting up a second, when any operation involving OpenSSL would cause the VM to lock up in a weird way - all network traffic would cease, it wouldn't process logins on the console, but it wasn't taking any CPU time off the host. The first virtual server was identical and worked perfectly. Another VM I tried to setup had installed Ubuntu fine then refused to reboot, throwing kernel exceptions to do with XFS. I've now installed Citrix XenServer 5.5 on both hosts, and am now setting up my third VM with absolutely no issues. I also had the same experience when I tried VMware, but I preferred Xen as it appears to give more features on the free license. My question is am I just unlucky with KVM, or is KVM as unstable as it appears? Are you using, or planning on using, KVM in production, and how successful have you been?

    Read the article

  • Why can’t two programs access my webcam simultaneously?

    - by qdii
    I first launch cheese and my webcam turns on. I then run vlc to grab the output of /dev/video0 but it fails with: [0x7f3ea40012e8] v4l2 demux error: cannot set input 0: Device or resource busy [0x7f3ea40012e8] v4l2 demux error: cannot set input 0: Device or resource busy [0x7f3ea4002168] v4l2 access error: cannot set input 0: Device or resource busy [0x7f3ea4002168] v4l2 access error: cannot set input 0: Device or resource busy [0x7f3eb4000b78] main input error: open of `v4l2:///dev/video0' failed Whatever pair of video programs I run (skype, cheese, vlc, etc.), the result is always the same: the second program can no longer use the webcam when the first one has already grabbed the output. However I find it curious as video4linux states: In general, V4L2 devices can be opened more than once. When this is supported by the driver, users can for example start a "panel" application to change controls like brightness or audio volume, while another application captures video and audio. My webcam is seen in lspci as 058f:a014 Alcor Micro Corp. Asus Integrated Webcam, but I don’t even know what the underlying driver is, so I can’t check whether my problem is driver-related or not. Any input would be more than welcome!

    Read the article

  • Trouble with a query

    - by Mark Allison
    Hi there, I'm having trouble with a query in SQL Server 2008 on some forex trading data. I have a trades table and an orders table. A trade needs to comprise of 2 or more orders. DDL schema and sample data below. What I want to do is write a query that shows the profit/loss in pips for each trade. A pip is 1/1000th of a currency. So the difference between USD 1.3441 and 1.3442 is 1 pip in forex-speak. A trade usually has one entry order and multiple exit orders. So for example if I buy 3 lots of the currency pair GBP/USD at the exchange rate of 1.6100 and then sell 1 lot at 1.6150, 1 lot at 1.6200 and 1 lot at 1.6250 then the profit is (1.6150 - 1.6100) + (1.6200 - 1.6100) + (1.6250 - 1.6100), or 50 + 100 + 150 = 300 pips profit. The trade could also go the other way (Shorting). For example the currency pair can be sold first before it's bought back later at a cheaper price. I would like a query that returns the following: tradeId, currencyPair, profitInPips It seems like a pretty straightforward query, but it's eluding me right now. Here's my DDL and sample data: CREATE TABLE [dbo].[trades]( [tradeId] [int] IDENTITY(1,1) NOT NULL, [currencyPair] [char](6) NOT NULL, CONSTRAINT [PK_trades] PRIMARY KEY CLUSTERED ( [tradeId] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] GO SET ANSI_PADDING OFF GO SET IDENTITY_INSERT [dbo].[trades] ON INSERT [dbo].[trades] ([tradeId], [currencyPair]) VALUES (1, N'GBPUSD') INSERT [dbo].[trades] ([tradeId], [currencyPair]) VALUES (2, N'GBPUSD') INSERT [dbo].[trades] ([tradeId], [currencyPair]) VALUES (3, N'GBPUSD') INSERT [dbo].[trades] ([tradeId], [currencyPair]) VALUES (4, N'GBPUSD') INSERT [dbo].[trades] ([tradeId], [currencyPair]) VALUES (5, N'GBPUSD') INSERT [dbo].[trades] ([tradeId], [currencyPair]) VALUES (6, N'GBPUSD') INSERT [dbo].[trades] ([tradeId], [currencyPair]) VALUES (7, N'GBPUSD') INSERT [dbo].[trades] ([tradeId], [currencyPair]) VALUES (8, N'GBPUSD') INSERT [dbo].[trades] ([tradeId], [currencyPair]) VALUES (9, N'GBPUSD') INSERT [dbo].[trades] ([tradeId], [currencyPair]) VALUES (10, N'GBPUSD') SET IDENTITY_INSERT [dbo].[trades] OFF GO CREATE TABLE [dbo].[orders]( [orderId] [int] IDENTITY(1,1) NOT NULL, [tradeId] [int] NOT NULL, [amount] [decimal](18, 1) NOT NULL, [buySell] [char](1) NOT NULL, [rate] [decimal](18, 6) NOT NULL, [orderDateTime] [datetime] NOT NULL, CONSTRAINT [PK_orders] PRIMARY KEY CLUSTERED ( [orderId] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] GO SET ANSI_PADDING OFF GO SET IDENTITY_INSERT [dbo].[orders] ON INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (1, 1, CAST(3.0 AS Decimal(18, 1)), N'S', CAST(1.606500 AS Decimal(18, 6)), CAST(0x00009CF40083D600 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (2, 1, CAST(3.0 AS Decimal(18, 1)), N'B', CAST(1.615500 AS Decimal(18, 6)), CAST(0x00009CF400A4CB80 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (3, 2, CAST(3.0 AS Decimal(18, 1)), N'S', CAST(1.608000 AS Decimal(18, 6)), CAST(0x00009CF500000000 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (4, 2, CAST(1.0 AS Decimal(18, 1)), N'B', CAST(1.603000 AS Decimal(18, 6)), CAST(0x00009CF50083D600 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (5, 2, CAST(2.0 AS Decimal(18, 1)), N'B', CAST(1.605500 AS Decimal(18, 6)), CAST(0x00009CF50107AC00 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (6, 3, CAST(3.0 AS Decimal(18, 1)), N'S', CAST(1.595500 AS Decimal(18, 6)), CAST(0x00009CF70083D600 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (7, 3, CAST(1.0 AS Decimal(18, 1)), N'B', CAST(1.590500 AS Decimal(18, 6)), CAST(0x00009CF700C5C100 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (8, 3, CAST(2.0 AS Decimal(18, 1)), N'B', CAST(1.594500 AS Decimal(18, 6)), CAST(0x00009CF701499700 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (9, 4, CAST(3.0 AS Decimal(18, 1)), N'B', CAST(1.611000 AS Decimal(18, 6)), CAST(0x00009CFB0083D600 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (10, 4, CAST(1.0 AS Decimal(18, 1)), N'S', CAST(1.616000 AS Decimal(18, 6)), CAST(0x00009CFB00A4CB80 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (11, 4, CAST(2.0 AS Decimal(18, 1)), N'S', CAST(1.611500 AS Decimal(18, 6)), CAST(0x00009CFB0107AC00 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (12, 5, CAST(3.0 AS Decimal(18, 1)), N'B', CAST(1.613000 AS Decimal(18, 6)), CAST(0x00009CFC0083D600 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (13, 5, CAST(1.0 AS Decimal(18, 1)), N'S', CAST(1.618000 AS Decimal(18, 6)), CAST(0x00009CFC0107AC00 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (14, 5, CAST(1.0 AS Decimal(18, 1)), N'S', CAST(1.623000 AS Decimal(18, 6)), CAST(0x00009CFC0083D600 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (15, 5, CAST(1.0 AS Decimal(18, 1)), N'S', CAST(1.628000 AS Decimal(18, 6)), CAST(0x00009CFD00C5C100 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (16, 6, CAST(3.0 AS Decimal(18, 1)), N'B', CAST(1.632000 AS Decimal(18, 6)), CAST(0x00009D020083D600 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (17, 6, CAST(1.0 AS Decimal(18, 1)), N'S', CAST(1.637000 AS Decimal(18, 6)), CAST(0x00009D0200A4CB80 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (18, 6, CAST(2.0 AS Decimal(18, 1)), N'S', CAST(1.630000 AS Decimal(18, 6)), CAST(0x00009D0200C5C100 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (19, 7, CAST(3.0 AS Decimal(18, 1)), N'B', CAST(1.634500 AS Decimal(18, 6)), CAST(0x00009D0201499700 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (20, 7, CAST(1.0 AS Decimal(18, 1)), N'S', CAST(1.639500 AS Decimal(18, 6)), CAST(0x00009D0300000000 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (21, 7, CAST(1.0 AS Decimal(18, 1)), N'S', CAST(1.644500 AS Decimal(18, 6)), CAST(0x00009D030083D600 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (22, 7, CAST(1.0 AS Decimal(18, 1)), N'S', CAST(1.637500 AS Decimal(18, 6)), CAST(0x00009D0300C5C100 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (23, 8, CAST(3.0 AS Decimal(18, 1)), N'S', CAST(1.625000 AS Decimal(18, 6)), CAST(0x00009D0400C5C100 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (24, 8, CAST(1.0 AS Decimal(18, 1)), N'B', CAST(1.620000 AS Decimal(18, 6)), CAST(0x00009D050083D600 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (25, 8, CAST(1.0 AS Decimal(18, 1)), N'B', CAST(1.615000 AS Decimal(18, 6)), CAST(0x00009D0500A4CB80 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (26, 8, CAST(1.0 AS Decimal(18, 1)), N'S', CAST(1.623000 AS Decimal(18, 6)), CAST(0x00009D050107AC00 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (27, 9, CAST(3.0 AS Decimal(18, 1)), N'S', CAST(1.618000 AS Decimal(18, 6)), CAST(0x00009D0600C5C100 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (28, 9, CAST(1.0 AS Decimal(18, 1)), N'B', CAST(1.613000 AS Decimal(18, 6)), CAST(0x00009D0600D63BC0 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (29, 9, CAST(1.0 AS Decimal(18, 1)), N'B', CAST(1.608000 AS Decimal(18, 6)), CAST(0x00009D0600E6B680 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (30, 9, CAST(1.0 AS Decimal(18, 1)), N'B', CAST(1.613300 AS Decimal(18, 6)), CAST(0x00009D0601391C40 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (31, 10, CAST(3.0 AS Decimal(18, 1)), N'B', CAST(1.614500 AS Decimal(18, 6)), CAST(0x00009D090083D600 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (32, 10, CAST(1.0 AS Decimal(18, 1)), N'S', CAST(1.619500 AS Decimal(18, 6)), CAST(0x00009D090107AC00 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (33, 10, CAST(1.0 AS Decimal(18, 1)), N'S', CAST(1.624500 AS Decimal(18, 6)), CAST(0x00009D0901499700 AS DateTime)) INSERT [dbo].[orders] ([orderId], [tradeId], [amount], [buySell], [rate], [orderDateTime]) VALUES (34, 10, CAST(1.0 AS Decimal(18, 1)), N'S', CAST(1.619000 AS Decimal(18, 6)), CAST(0x00009D0A0083D600 AS DateTime)) SET IDENTITY_INSERT [dbo].[orders] OFF /****** Object: ForeignKey [FK_orders_trades] Script Date: 04/02/2010 15:05:31 ******/ ALTER TABLE [dbo].[orders] WITH CHECK ADD CONSTRAINT [FK_orders_trades] FOREIGN KEY([tradeId]) REFERENCES [dbo].[trades] ([tradeId]) GO ALTER TABLE [dbo].[orders] CHECK CONSTRAINT [FK_orders_trades] GO Thanks in advance for any help!

    Read the article

  • Cannot connect to my EC2 instance because of "Permission denied (publickey)"

    - by Burak
    In AWS console, I saw that my key pair was deleted. I created a new one with the same name. Then I tried to connect with ssh -v -i sohoKey.pem ec2-user@******.compute-1.amazonaws.com Here's the output: macs-MacBook-Air:~ mac$ ssh -v -i sohoKey.pem ec2-user@******.compute-1.amazonaws.com OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug1: Connecting to ********.compute-1.amazonaws.com [*****] port 22. debug1: Connection established. debug1: identity file sohoKey.pem type -1 debug1: identity file sohoKey.pem-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host '*******.compute-1.amazonaws.com' is known and matches the RSA host key. debug1: Found key in /Users/mac/.ssh/known_hosts:3 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: sohoKey.pem debug1: Authentications that can continue: publickey debug1: Trying private key: sohoKey.pem debug1: read PEM private key done: type RSA debug1: Authentications that can continue: publickey debug1: No more authentication methods to try. Permission denied (publickey). Update: I detached my old EBS and attached to the new instance. Now, how can I mount it?

    Read the article

  • ZFS + FreeBSD + virtualbox

    - by John
    Hi, I'm configuring a FreeBSD server hosting virtualbox serving half dozen mission critical busy mail servers. I just learned ZFS, I'm quite attracted, but have a few questions: what is the CPU overhead of ZFS? I googled and found little (or no) benchmark for that. from what I learned, when ZFS updates files, it keeps the old file as snapshot, and write the updated part for the new version. However that would mean for each snapshot it keeps that require significant storage overhead. How much is this storage overhead? For example, suppose I have 2TB usable space, how much space can actually be used for the latest version of files one year later? is FreeBSD with ZFS hosting virtualbox serving half dozen busy guest mission critical mail servers a reasonable combination? Anything particular to be careful with? And can I still choose ZFS for the guest OSs? This is because I may build another identical such box for redundancy, and will need to do some mirroring between each pair of the guest systems across the boxes. I'm trying to configure a Dell R710 for this. From what I learned, I shouldn't choose any RAID at all, is that true? In that case, are the drives still arrive hot swappable? this may sounds a bit pathetic, but since I have no experience with ZFS at all, and this is a mission critical server, so just ask just in case: I'm choosing twin Intel L5630 processors, and 6 x 600GB 15K RPM Serial-Attach SCSI drives. If I need more space in the future, I would just hot swap some drivers with larger capacity to expand the storage. There is no problem with these, right?

    Read the article

  • How do I improve my incremental-backup performance?

    - by Alistair Bell
    I'm currently using the traditional rsync+cp -al method to create incremental/snapshot backups of our server tree. The backups are going onto a pair of eight-disk towers connected to the backup machine (a Sandy Bridge machine with 16 GB of RAM, running CentOS 5.5) via four eSATA connections (four disks per connection). Each disk is a regular 2 TB disk, so we have 32 TB of disk space connected to the backup machine. We're backing up about 20 TB of data on the servers with this. The problem is that each daily backup is taking more than 24 hours, and the real time-killer isn't the actual rsync, but the time it takes to perform a cp -al of the tree locally on the backup machine. It's taking more than 12 hours just to make the shadow copy of the tree, and as far as I can tell the performance backlog is at the disk (top shows the cp using a lot of RAM but not a lot of CPU and mostly in uninterruptible-sleep state) We have the server data split into four major volumes (and a few minor ones), and each of these backups runs in parallel (with some offsets in the cron to try to get some disks' cp done first). There are two volumes on the backup drive, both striped LVM volumes of 16 TB each. So obviously I need to improve the performance because it's unusable as it stands. The first question is: when CentOS 6 comes out, with support for btrfs, will making snapshots of subvolumes with btrfs substantially increase this performance? The second is: is there a way, with ext3 or something else supported in CentOS 5 or 6, to 'encourage' it to put the directories/inodes in one part of a volume (which could happen to be the part that's on an SSD, via LVM) and the files in another? That would presumably solve the problem, but I don't know of ways to hint ext3 like that.

    Read the article

  • Configuration for a two machine ESXi cluster using VSA to present local storage to VMs

    - by MDMarra
    I'm designing a little vSphere 5 cluster for one of our remote sites. We have some IBM x3650s that have 6x 300GB 10K RPM drives in them, along with dual quad core CPUs and 24GB RAM. Because we use HP P4500 G2s at our primary site, we have licenses available for HP P4000 VSAs. I thought that this would be the perfect opportunity to use them. Below is a basic drawing of what I want to accomplish: I want to run a P4000 VSA on each server and run them in a Network RAID-10 (Lefthand speak for network mirroring, think of it as RAID 1 across nodes or as an active/active storage cluster). I will then present this storage to guests that will run on this mini-cluster. It will be managed by a vCenter Server on our main site. All connections will be GbE with two dedicated to storage. Management and Data will share a pair of connections, since I don't expect there to be high load. These servers are just there to provide directory services, dhcp, printing, etc. Does anyone see anything potentially wrong with this approach? Is this the best way to do this without adding additional dedicated storage heads? Are there any pitfalls in this design, besides the lack of dedicated Data/Mgmt interfaces?

    Read the article

  • script to run sox to combine multiple mono tracks to stereo

    - by Ze'ev
    I have a folder full of .wav audio files. Some are stereo, most are mono splits. The mono split pairs are all named foo bar track.L.wav and foo bar track.R.wav I can use the command line tool sox to combine a mono pair into 1 stereo track like this: sox -M track1.L.wav track1.R.wav track1.Stereo.wav where the first 2 files are the mono pairs, and the third is the output stereo file. This is great, but I'd like to have a script that will automatically find all the mono pairs and combine them into stereo files. I.e., I need it to find all files which have the same name except for the .L. and .R. before the extension, and run sox on them, outputting to a new file with the same name without the L/R suffix. For example, if my folder contains these files: track1.L.wav track2.L.wav track3.L.wav track4.L.wav track1.R.wav track2.R.wav track3.R.wav track4.R.wav track6.wav track7.wav I need to run these commands: sox -M track1.L.wav track1.R.wav track1.Stereo.wav sox -M track2.L.wav track2.R.wav track2.Stereo.wav sox -M track3.L.wav track3.R.wav track3.Stereo.wav sox -M track4.L.wav track4.R.wav track4.Stereo.wav Here's where I am so far: for file in ./*.L.wav; do file2=`echo $file | sed 's_\(.*\).L.wav_\1.R.wav_'`; out=`echo $file | sed 's_\(.*\).L.wav_\1.STEREO.wav_'`; echo $file - $file2 - $out; done That works, but when I replace the echo line with sox -M $file $file2 $out; it doesn't work; spaces in the filenames cause it to fail.

    Read the article

  • Setup of HP ProCurve 2810-24G for iSCSI?

    - by 3molo
    Hi, I have a pair of ProCurve 2810-24G that I will use with a Dell Equallogic SAN and Vmware ESXi. Since ESXi does MPIO, I am a little uncertain on the configuration for links between the switches. Is a trunk the right way to go between the switches? I know that the ports for the SAN and the ESXi hosts should be untagged, so does that mean that I want tagged VLAN on the trunk ports? This is more or less the configuration: trunk 1-4 Trk1 Trunk snmp-server community "public" Unrestricted vlan 1 name "DEFAULT_VLAN" untagged 24,Trk1 ip address 10.180.3.1 255.255.255.0 no untagged 5-23 exit vlan 801 name "Storage" untagged 5-23 tagged Trk1 jumbo exit no fault-finder broadcast-storm stack commander "sanstack" spanning-tree spanning-tree Trk1 priority 4 spanning-tree force-version RSTP-operation The Equallogic PS4000 SAN has two controllers, with two network interfaces each. Dell recommends each controller to be connected to each of the switches. From vmware documentation, it seems creating one vmkernel per pNIC is recommended. With MPIO, this could allow for more than 1 Gbps throughput.

    Read the article

  • iPhone Remote with iTunes Library via VPN

    - by sudo work
    Alright, so I'm currently behind a network router (not under my control). The router performs NAT and somehow prevents a computer from scanning other nodes. At least, you're unable, in this instance, to locate an iTunes library. You can, however, communicate with a node's open ports if the local IP address is known, as well as the port. I haven't actually tried port scanning a specific IP using nmap or another tool yet. So I've tried one solution to remove the contribution of the router entirely (to verify that it works without the influence of the routers). I set up an access point using my iPhone and tethered my computer (with the library) to it. From here, I was able to pair my library and the iPhone Remote application. Control of the library was normal as well. This solution is not ideal, however, because I am actively using bandwidth with my computer and cannot afford to be tethered to my 3G connection. A viable solution for me is to use a common VPN connection, which I have set up on a Ubuntu (Intrepid) server that is remote. Both my computer and iPhone are able to access the VPN via PPTP. The server is setup with PPTPD as the VPN-server; I'm using IPTables to perform IP masquerading and forwarding traffic. I however, still cannot connect the library to the phone. I can however, see both devices on the VPN subnet (192.168.0.0/24). SSH'ing and such works fine. What settings on the VPN server must I change to get this to work? Also, how can I assign static IP addresses to various PPTP clients based on MAC addresses?

    Read the article

  • org-sort multi: date/time (?d ?t) | priority (?p) | title (?a)

    - by lawlist
    Is anyone aware of an org-sort function / modification that can refile / organize a group of TODO so that it sorts them by three (3) criteria: first sort by due date, second sort by priority, and third sort by by title of the task? EDIT: I believe that org-sort by deadline (?d) has a bug that cannot properly handle undated tasks. I am working on a workaround (i.e., moving the undated todo to a different heading before the deadline (?d) sort occurs), but perhaps the best thing to do would be to try and fix the original sorting function. Development of the workaround can be found in this thread (i.e., moving the undated tasks to a different heading in one fell swoop): How to automate org-refile for multiple todo EDIT: Apparently, the following code (ancient history) that I found on the internet was eventually modified and included as a part of org-sort-entries. Unfortunately, undated todo are not properly sorted when sorting by deadline -- i.e., they are mixed in with the dated todo. ;; multiple sort (defun org-sort-multi (&rest sort-types) "Multiple sorts on a certain level of an outline tree, or plain list items. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Example: To sort first by TODO status, then by priority, then by date, then alphabetically (case-sensitive) use the following call: (org-sort-multi '(?d ?p ?t (t . ?a)))" (interactive) (dolist (x (nreverse sort-types)) (when (char-valid-p x) (setq x (cons nil x))) (condition-case nil (org-sort-entries (car x) (cdr x)) (error nil)))) ;; sort current level (defun lawlist-sort (&rest sort-types) "Sort the current org level. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Defaults to \"?o ?p\" which is sorted by TODO status, then by priority" (interactive) (when (equal mode-name "Org") (let ((sort-types (or sort-types (if (or (org-entry-get nil "TODO") (org-entry-get nil "PRIORITY")) '(?d ?t ?p) ;; date, time, priority '((nil . ?a)))))) (save-excursion (outline-up-heading 1) (let ((start (point)) end) (while (and (not (bobp)) (not (eobp)) (<= (point) start)) (condition-case nil (outline-forward-same-level 1) (error (outline-up-heading 1)))) (unless (> (point) start) (goto-char (point-max))) (setq end (point)) (goto-char start) (apply 'org-sort-multi sort-types) (goto-char end) (when (eobp) (forward-line -1)) (when (looking-at "^\\s-*$") ;; (delete-line) ) (goto-char start) ;; (dotimes (x ) (org-cycle)) ))))) EDIT: Here is a more modern version of multi-sort, which is likely based upon further development of the above-code: (defun org-sort-all () (interactive) (save-excursion (goto-char (point-min)) (while (re-search-forward "^\* " nil t) (goto-char (match-beginning 0)) (condition-case err (progn (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o) (forward-line)) (error nil))) (goto-char (point-min)) (while (re-search-forward "\* PROJECT " nil t) (goto-char (line-beginning-position)) (ignore-errors (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o)) (forward-line)))) EDIT: The best option will be to fix sorting of deadlines (?d) so that undated todo are moved to the bottom of the outline, instead of mixed in with the dated todo. Here is an excerpt from the current org.el included within Emacs Trunk (as of July 1, 2013): (defun org-sort (with-case) "Call `org-sort-entries', `org-table-sort-lines' or `org-sort-list'. Optional argument WITH-CASE means sort case-sensitively." (interactive "P") (cond ((org-at-table-p) (org-call-with-arg 'org-table-sort-lines with-case)) ((org-at-item-p) (org-call-with-arg 'org-sort-list with-case)) (t (org-call-with-arg 'org-sort-entries with-case)))) (defun org-sort-remove-invisible (s) (remove-text-properties 0 (length s) org-rm-props s) (while (string-match org-bracket-link-regexp s) (setq s (replace-match (if (match-end 2) (match-string 3 s) (match-string 1 s)) t t s))) s) (defvar org-priority-regexp) ; defined later in the file (defvar org-after-sorting-entries-or-items-hook nil "Hook that is run after a bunch of entries or items have been sorted. When children are sorted, the cursor is in the parent line when this hook gets called. When a region or a plain list is sorted, the cursor will be in the first entry of the sorted region/list.") (defun org-sort-entries (&optional with-case sorting-type getkey-func compare-func property) "Sort entries on a certain level of an outline tree. If there is an active region, the entries in the region are sorted. Else, if the cursor is before the first entry, sort the top-level items. Else, the children of the entry at point are sorted. Sorting can be alphabetically, numerically, by date/time as given by a time stamp, by a property or by priority. The command prompts for the sorting type unless it has been given to the function through the SORTING-TYPE argument, which needs to be a character, \(?n ?N ?a ?A ?t ?T ?s ?S ?d ?D ?p ?P ?o ?O ?r ?R ?f ?F). Here is the precise meaning of each character: n Numerically, by converting the beginning of the entry/item to a number. a Alphabetically, ignoring the TODO keyword and the priority, if any. o By order of TODO keywords. t By date/time, either the first active time stamp in the entry, or, if none exist, by the first inactive one. s By the scheduled date/time. d By deadline date/time. c By creation time, which is assumed to be the first inactive time stamp at the beginning of a line. p By priority according to the cookie. r By the value of a property. Capital letters will reverse the sort order. If the SORTING-TYPE is ?f or ?F, then GETKEY-FUNC specifies a function to be called with point at the beginning of the record. It must return either a string or a number that should serve as the sorting key for that record. Comparing entries ignores case by default. However, with an optional argument WITH-CASE, the sorting considers case as well." (interactive "P") (let ((case-func (if with-case 'identity 'downcase)) (cmstr ;; The clock marker is lost when using `sort-subr', let's ;; store the clocking string. (when (equal (marker-buffer org-clock-marker) (current-buffer)) (save-excursion (goto-char org-clock-marker) (looking-back "^.*") (match-string-no-properties 0)))) start beg end stars re re2 txt what tmp) ;; Find beginning and end of region to sort (cond ((org-region-active-p) ;; we will sort the region (setq end (region-end) what "region") (goto-char (region-beginning)) (if (not (org-at-heading-p)) (outline-next-heading)) (setq start (point))) ((or (org-at-heading-p) (condition-case nil (progn (org-back-to-heading) t) (error nil))) ;; we will sort the children of the current headline (org-back-to-heading) (setq start (point) end (progn (org-end-of-subtree t t) (or (bolp) (insert "\n")) (org-back-over-empty-lines) (point)) what "children") (goto-char start) (show-subtree) (outline-next-heading)) (t ;; we will sort the top-level entries in this file (goto-char (point-min)) (or (org-at-heading-p) (outline-next-heading)) (setq start (point)) (goto-char (point-max)) (beginning-of-line 1) (when (looking-at ".*?\\S-") ;; File ends in a non-white line (end-of-line 1) (insert "\n")) (setq end (point-max)) (setq what "top-level") (goto-char start) (show-all))) (setq beg (point)) (if (>= beg end) (error "Nothing to sort")) (looking-at "\\(\\*+\\)") (setq stars (match-string 1) re (concat "^" (regexp-quote stars) " +") re2 (concat "^" (regexp-quote (substring stars 0 -1)) "[ \t\n]") txt (buffer-substring beg end)) (if (not (equal (substring txt -1) "\n")) (setq txt (concat txt "\n"))) (if (and (not (equal stars "*")) (string-match re2 txt)) (error "Region to sort contains a level above the first entry")) (unless sorting-type (message "Sort %s: [a]lpha [n]umeric [p]riority p[r]operty todo[o]rder [f]unc [t]ime [s]cheduled [d]eadline [c]reated A/N/P/R/O/F/T/S/D/C means reversed:" what) (setq sorting-type (read-char-exclusive)) (and (= (downcase sorting-type) ?f) (setq getkey-func (org-icompleting-read "Sort using function: " obarray 'fboundp t nil nil)) (setq getkey-func (intern getkey-func))) (and (= (downcase sorting-type) ?r) (setq property (org-icompleting-read "Property: " (mapcar 'list (org-buffer-property-keys t)) nil t)))) (message "Sorting entries...") (save-restriction (narrow-to-region start end) (let ((dcst (downcase sorting-type)) (case-fold-search nil) (now (current-time))) (sort-subr (/= dcst sorting-type) ;; This function moves to the beginning character of the "record" to ;; be sorted. (lambda nil (if (re-search-forward re nil t) (goto-char (match-beginning 0)) (goto-char (point-max)))) ;; This function moves to the last character of the "record" being ;; sorted. (lambda nil (save-match-data (condition-case nil (outline-forward-same-level 1) (error (goto-char (point-max)))))) ;; This function returns the value that gets sorted against. (lambda nil (cond ((= dcst ?n) (if (looking-at org-complex-heading-regexp) (string-to-number (match-string 4)) nil)) ((= dcst ?a) (if (looking-at org-complex-heading-regexp) (funcall case-func (match-string 4)) nil)) ((= dcst ?t) (let ((end (save-excursion (outline-next-heading) (point)))) (if (or (re-search-forward org-ts-regexp end t) (re-search-forward org-ts-regexp-both end t)) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?c) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward (concat "^[ \t]*\\[" org-ts-regexp1 "\\]") end t) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?s) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-scheduled-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?d) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-deadline-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?p) (if (re-search-forward org-priority-regexp (point-at-eol) t) (string-to-char (match-string 2)) org-default-priority)) ((= dcst ?r) (or (org-entry-get nil property) "")) ((= dcst ?o) (if (looking-at org-complex-heading-regexp) (- 9999 (length (member (match-string 2) org-todo-keywords-1))))) ((= dcst ?f) (if getkey-func (progn (setq tmp (funcall getkey-func)) (if (stringp tmp) (setq tmp (funcall case-func tmp))) tmp) (error "Invalid key function `%s'" getkey-func))) (t (error "Invalid sorting type `%c'" sorting-type)))) nil (cond ((= dcst ?a) 'string<) ((= dcst ?f) compare-func) ((member dcst '(?p ?t ?s ?d ?c)) '<))))) (run-hooks 'org-after-sorting-entries-or-items-hook) ;; Reset the clock marker if needed (when cmstr (save-excursion (goto-char start) (search-forward cmstr nil t) (move-marker org-clock-marker (point)))) (message "Sorting entries...done"))) (defun org-do-sort (table what &optional with-case sorting-type) "Sort TABLE of WHAT according to SORTING-TYPE. The user will be prompted for the SORTING-TYPE if the call to this function does not specify it. WHAT is only for the prompt, to indicate what is being sorted. The sorting key will be extracted from the car of the elements of the table. If WITH-CASE is non-nil, the sorting will be case-sensitive." (unless sorting-type (message "Sort %s: [a]lphabetic, [n]umeric, [t]ime. A/N/T means reversed:" what) (setq sorting-type (read-char-exclusive))) (let ((dcst (downcase sorting-type)) extractfun comparefun) ;; Define the appropriate functions (cond ((= dcst ?n) (setq extractfun 'string-to-number comparefun (if (= dcst sorting-type) '< '>))) ((= dcst ?a) (setq extractfun (if with-case (lambda(x) (org-sort-remove-invisible x)) (lambda(x) (downcase (org-sort-remove-invisible x)))) comparefun (if (= dcst sorting-type) 'string< (lambda (a b) (and (not (string< a b)) (not (string= a b))))))) ((= dcst ?t) (setq extractfun (lambda (x) (if (or (string-match org-ts-regexp x) (string-match org-ts-regexp-both x)) (org-float-time (org-time-string-to-time (match-string 0 x))) 0)) comparefun (if (= dcst sorting-type) '< '>))) (t (error "Invalid sorting type `%c'" sorting-type))) (sort (mapcar (lambda (x) (cons (funcall extractfun (car x)) (cdr x))) table) (lambda (a b) (funcall comparefun (car a) (car b))))))

    Read the article

  • Deploying a Git server in a AWS linux instance

    - by Leroux
    I'm making a git server on my linux instance in AWS. I tried doing it using these instructions but in the end I always get stuck with a "Permission denied (publickey)" message. So here is my detailed steps, the client is my windows machine running mysysgit and the server is the AWS ubuntu instance : 1) I created user Git with a simple password. 2) Created the ssh directory in ~/.ssh 3) On the client I created ssh keys using ssh-keygen -t rsa -b 1024, they got dropped in my /Users/[Name]/.ssh directory, id_rsa and id_rsa.pub key pair was created. 4) Using notepad I copy pasted the text into newly created files on the server in the ~/.ssh directory of my Git user. ~/.ssh/id_rsa and **~/.ssh/id_rsa.pub** were copied. 5) On the server I made the authorized_hosts file using "cat id_rsa.pub authorized_hosts" (while inside the .ssh directory) 6) Now to test it, on my client machine I did ssh -v git@[ip.address] 7) Result : debug1: Host 'ip.address' is known and matches the RSA host key. debug1: Found key in /c/Users/[Name]/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /c/Users/[Name]/.ssh/identity debug1: Trying private key: /c/Users/[Name]/.ssh/id_rsa debug1: Offering public key: /c/Users/[Name]/.ssh/id_dsa debug1: Authentications that can continue: publickey debug1: No more authentication methods to try. Permission denied (publickey). I would appreciate any insight anyone can give me.

    Read the article

< Previous Page | 37 38 39 40 41 42 43 44 45 46 47 48  | Next Page >