Search Results

Search found 16560 results on 663 pages for 'far'.

Page 410/663 | < Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >

• Openfiler iSCSI performance

  - by Justin

  Hoping someone can point me in the right direction with some iSCSI performance issues I'm having. I'm running Openfiler 2.99 on an older ProLiant DL360 G5. Dual Xeon processor, 6GB ECC RAM, Intel Gigabit Server NIC, SAS controller with and 3 10K SAS drives in a RAID 5. When I run a simple write test from the box directly the performance is very good: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 4.64468 s, 226 MB/s So I created a LUN, attached it to another box I have running ESXi 5.1 (Core i7 2600k, 16GB RAM, Intel Gigabit Server NIC) and created a new datastore. Once I created the datastore I was able to create and start a VM running CentOS with 2GB of RAM and 16GB of disk space. The OS installed fine and I'm able to use it but when I ran the same test inside the VM I get dramatically different results: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 26.8786 s, 39.0 MB/s [root@localhost ~]# Both servers have brand new Intel Server NIC's and I have Jumbo Frames enabled on the switch, the openfiler box as well as the VMKernel adapter on the ESXi box. I can confirm this is set up properly by using the vmkping command from the ESXi host: ~ # vmkping 10.0.0.1 -s 9000 PING 10.0.0.1 (10.0.0.1): 9000 data bytes 9008 bytes from 10.0.0.1: icmp_seq=0 ttl=64 time=0.533 ms 9008 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.736 ms 9008 bytes from 10.0.0.1: icmp_seq=2 ttl=64 time=0.570 ms The only thing I haven't tried as far as networking goes is bonding two interfaces together. I'm open to trying that down the road but for now I am trying to keep things simple. I know this is a pretty modest setup and I'm not expecting top notch performance but I would like to see 90-100MB/s. Any ideas?

  Read the article

• Broke NetBeans file associations in Windows XP how do I get them back?

  - by Serhiy

  I broke my file association in XP... Does anyone have any clue how to fix it? When I right click and select Open With... the application I want to use (NetBeans) to open the file is not on the list... and when I browse for it it won't let me select it (well it does but then won't add it to the list). The way I broke it is by installing 6.7 and then uninstalling 6.5.... since then my file associations have all been broken. I even tried uninstalling NetBeans and reinstalling it again... no luck... I even went as far as adding my own action called "OpenIt" to the file types I wanted... and that works... but only if the file/folders that contain in don't have any spaces... otherwise NetBeans throws a ".....does not exist, or is not a plain file". Thus nothing off the desktop can be opened... Does anyone know of how I can fix this problem? Thanks.

  Read the article

• Split horizon, route filtering, and having RIPv2 announce a non-attached route to host

  - by Paul

  Routers A, B & C live at 10.1.1.1, 10.1.1.2 and 10.1.1.3 on a /24 metro Ethernet subnet. Each router also has its own private subnet on another interface. Router B's private subnet links thru a firewall to a 10.20.20.0 network at another organization. Router B redistributes to A and C several static routes for hosts on 10.20.20.0. However, a new host 10.20.20.5/32 must be reached via a different path that goes through router C. I know that C can advertise this host-based route with no problem, but I'd like to keep all my 10.20.20.x static routes in one place. So, how can B tell A via RIPv2 to send packets for 10.20.20.5/32 to C? So far it looks like I need no ip split-horizon on router B's 10.1.1.2 interface, perhaps because B has already learned from C other routes with a next hop of 10.1.1.3. But how does RIPv2 split horizon with no auto-summary and network 10.0.0.0 really work? If B learns a route to ANY 10.x.x.x network or host from A or C, is that enough for split horizon to keep it from redistributing ip route 10.20.20.5 255.255.255.255 10.1.1.3? And if I want to suspend split horizon only for this one new host, how do I filter out the mess of regurgitated routes that B advertises when I try no ip split-horizon? Thanks much.

  Read the article

• VSFTP Users and Directories

  - by Mathew

  I'm stuck. I've been working all day on trying to figure out what I'm doing wrong and I've hit wall after wall. What I'm trying to do: Setup FTP in such a way that certain users have access only to their directory, but higher level users have access to all directories. What I've Googled so far: I started with this, but that didn't do what I needed it to. I then used this, but once I created one user, it wouldn't let me create another one. Finally, I decided to follow this, but it wouldn't let me even create one user. I'm using Ubuntu 10. I can login to ftp as a root user and it takes me to the home directory. If I try to login using the user I created in the tutorial it says: Status: Connection established, waiting for welcome message... Response: 220 (vsFTPd 2.2.2) Command: USER mathew Response: 331 Please specify the password. Command: PASS **** Response: 530 Login incorrect. Error: Critical error Error: Could not connect to server

  Read the article

• Xbox 360 formatting for MP4 h.264?

  - by Kayle

  For the life of me, I can't get the Xbox 360 to recognize anything other than a WMV. It's full updated with Xbox Live and I even added all the Video apps (Zune, Netflix, etc) just to see if it would force some sort of codec update. I'm using handbrake, at the moment, to try and convert an mkv with subtitles. Handbrake burns the subtitles into the video for me, which is important. I can't figure out what is missing though, as the Xbox refuses to acknowledge my MP4s. Here's the VLC codec info output: As far as I can tell, this is EXACTLY what the xbox supports. I don't want to convert every video twice by throwing it through Windows Movie Maker just to get it to WMV. None of the converters mentions above output to WMV and I don't like WMV since it's not as universal as MP4. I've tried changing the container name manually to M4V, MOV, and AVI to see if I can trick the Xbox... no beans. The video displays perfectly in WMP, of course. If I convert it to WMV, suddenly it works fine. But I don't find this acceptable, as I know the Xbox is supposed to support other filetypes. If anyone knows why my Xbox won't play anything but WMVs, I would be very appreciative to know why! It's driving me nuts. The only other information I can think to include is that it's about 3 years old and of the cheapest variety (Xbox Arcade). I've added a hard drive, xbox live, and have thoroughly updated it. Maybe there's a specific video update I'm unaware of??

  Read the article

• Help building maya render node spec

  - by Ak

  Hi there, I'm looking to build 4x Maya render slaves/nodes for a friend of mine when his project gets green lit. The project involves MentalRay and lots of glass. I'm unsure if the new i7's 9xx or 8xx with hyper threading will do any better than a core 2 quad of the same (or close enough) speed. Does hyper threading make a difference to Maya or is it more performance per core based? I'm sure he's prefer I'd build another render node than pay for a bleeding edge CPU that only adds fractionly more GHz. -- The rest of the spec so far: 4Gb - 8Gb ram 64 bit OS: Probably Windows 7 (I know Linux is free, but want to build something my friend can support himself as easily as he supports his own workstation) 1TB HDD to hold textures, Maya files and renders which will be copied to central storage later Mobo with on-board video, gigabit NIC 500 - 650 watt PSU Desktop case something like a: Cooler Master ATCS 840 The machines will sold afterwards if necessary. -- If anyone has had experience in Maya and has done any tests with the new CPUs vs. the older ones I'd really appreciate your input.

  Read the article

• Embed album art in OGG through command line in linux

  - by teratomata

  I want to convert my music from flac to ogg, and currently oggenc does that perfectly except for album art. Metaflac can output album art, however there seems to be no command line tool to embed album art into ogg. MP3Tag and EasyTag are able to do it, and there is a specification for it here which calls for the image to be base64 encoded. However so far I have been unsuccessful in being able to take an image file, converting it to base64 and embedding it into an ogg file. If I take a base64 encoded image from an ogg file that already has the image embedded, I can easily embed it into another image using vorbiscomment: vorbiscomment -l withimage.ogg > textfile vorbiscomment -c textfile noimage.ogg My problem is taking something like a jpeg and converting it to base64. Currently I have: base64 --wrap=0 ./image.jpg Which gives me the image file converted to base64, using vorbiscomment and following the tagging rules, I can embed that into an ogg file like so: echo "METADATA_BLOCK_PICTURE=$(base64 --wrap=0 ./image.jpg)" > ./folder.txt vorbiscomment -c textfile noimage.ogg However this gives me an ogg whose image does not work properly. I noticed when comparing the base64 strings that all properly embedding pictures have a header line but all the base64 strings I generate are lacking this header. Further analysis of the header: od -c header.txt 0000000 \0 \0 \0 003 \0 \0 \0 \n i m a g e / j p 0000020 e g \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 \0 0000040 \0 \0 \0 \0 \0 \0 \0 \0 035 332 0000052 Which follows the spec given above. Notice 003 corresponds to front cover and image/jpeg is the mime type. So finally, my question is, how can I base64 encode a file and generate this header along with it for embedding into an ogg file?

  Read the article

• What's the risk of running a Domain Controller so that it is accessible from the internet?

  - by Adrian Grigore

  I have three remote dedicated web servers at different webhosts. Adding them to a common domain would make a lot of administration tasks much easier. Since two of the servers are running Windows 2008 R2 Standard, I thought about promoting them to Domain Controllers in order to set up the windows domain. There's another thread at Serverfault that recommends this. At the same time I've read a lot of times on different websites that this is not a good idea because an domain controller should always be behind a firewall LAN. But I can't set up something like this because I don't have a LAN with a static IP accessible from the internet. In fact I don't even have a windows server in my LAN. What I have not found out is why exposing a DC to the Internet would be bad idea. The only risk I can see is that if someone penetrates one of my webservers, it should be much easier to penetrate the others as well. But as far as I can see that's the worst case scenario since I am only going my web servers to that domain, not any computers from my local network. Is this the only downside or does it also make it easier to penetrate one of my web servers in the first place? Thanks, Adrian

  Read the article

• Outlook 2007 / 2010 Calendar: hide meetings in specific category

  - by Jeroen

  Question Is there any easy way in Outlook 2007/2010 to show/hide meetings in a specific category? Preferably only for a specific view (the Month view, in this case). Note: I was almost done writing this question, adding just one more "What I've tried" option, when I found an acceptable (though imperfect) solution. Remembering this SE blog post I figured I might as well post it after all and answer it myself. And who knows, perhaps someone else has a more elegant solution. The reason for me personally is that I'd like to hide the "small, recurring meetings" like our daily stand-up meeting in the month view. I'd prefer an Outlook feature that is meant for this (there must be one for this, right?), but I'm open to workarounds or plugin suggestions as well. What I expected to find somewhere was a list of categories (with added option "No category") where you could select/deselect from which categories you'd see meetings. Something like this mock-up: What I've tried Edit "View Settings", and use a "Filter..." on categories. This has several disadvantages, the major one is that the filter only allows me to choose what I want to show, but not what I want to hide. Even if I tick all categories but one for the filter it would still hide any uncategorized meeting. Similar to 1, but then using Advanced filters. Still a bit clumsy as changing views can be up to three clicks, but this is the best solution so far (see the corresponding answer below). Creating a sub-calendar for these "small" meetings that I wish to hide. This felt a bit clumsy and like overkill, but did provide an easy "select/deselect" option to show/hide these meetings. Search for plug-ins that do this. Couldn't find one (yet).

  Read the article

• Subversion 1.6 + SASL : Only works with plaintext 'userPassword'?

  - by SiegeX

  I'm attempting to setup svnserve with SASL support on my Slackware 13.1 server and after some trial and error I'm able to get it to work with the configuration listed below: svnserve.conf [general] anon-access = read auth-access = write realm = myrepo [sasl] use-sasl = true min-encryption = 128 max-encryption = 256 /etc/sasl2/svn.conf pwcheck_method: auxprop auxprop_plugin: sasldb sasldb_path: /etc/sasl2/my_sasldb mech_list: DIGEST-MD5 sasldb users $ sasldblistusers2 -f /etc/sasl2/my_sasldb test@myrepo: cmusaslsecretOTP test@myrepo: userPassword You'll notice that the output of sasldblistusers2 shows my test user as having both an encrypted cmusaslsecretOTP password as well as a plain text userPassword passwd. i.e., if I were to run strings /etc/sasl2/my_sasldb I would see the test users' password in plaintext. These two password entries were created with the following subversion book recommended command: saslpasswd2 -c -f /etc/sasl2/my_sasldb -u myrepo test After reading man saslpasswd2 I see the following option: -n Don't set the plaintext userPassword property for the user. Only mechanism-specific secrets will be set (e.g. OTP, SRP) This is exactly what I want to do, suppress the plain text password and only use the mechanism-specific secret (OTP in my case). So I clear out /etc/sasl2/my_sasldb and rerun saslpasswd2 as: saslpasswd2 -n -c -f /etc/sasl2/my_sasldb -u myrepo test I then follow it up with a sasldblistusers2 and I see: $ sasldblistusers2 -f /etc/sasl2/my_sasldb test@myrepo: cmusaslsecretOTP Perfect! I think, now I have only encrypted passwords.... only neither the Linux svn client nor the Windows TortoiseSVN client can connect to my repo anymore. They both present me with the user/pass challenge but that's as far as I get. TLDR So, what is the point of SVN supporting SASL if my sasldb must store its passwords in plaintext to work?

  Read the article

• Ghost Solution Suite: Booting over PXE to WinPE for re-imaging, then booting to installed OS

  - by uberdanzik

  I have 40 networked computers that need to be re-imaged each night over a network via an automatic and unattended process. This is to reset the computers to a default state, as well as update the computers to the latest software loads. I'm using Symantec Ghost Solution Suite 2.5. My process so far is the following: Client begins in a powered down WakeOnLan accepting state. Ghost Console task uses WakeOnLan and PXE to boot the client into the WinPE environment. The client connects to the ghost console and reimages itself successfully. The client closes WinPE and restarts. PROBLEM: The client boots into the WinPE environment again, instead of the newly installed OS (Win7) I need it to boot into Win7 once so that I can run a few configuration batch files, then shut down into the WakeOnLan state again. Ghost console even reports an error on the process, that it never rebooted into the OS. Right now it seems that there is not an option to stop it from booting into the PXE server's WinPE image after re-imaging. Even if I set up a PXE boot menu with other boot options, its pointless, because it will always boot the default option. I would expect the ghost console task to be able to influence the PXE boot choice somehow. What do they expect us to do, turn the PXE server on and off manually? How can I get the client to boot to the OS after re-imaging? Thank you.

  Read the article

• How can I get Thunderbird to automatically move messages?

  - by David Heffernan

  I have Thunderbird 15. I'd like to automatically move messages from one folder to another. My mail account is an IMAP account. My Blackberry is also connected to the account and when it sends mail, it places a copy on the IMAP server in a folder named Sent Items. I'd like those messages to be moved to my Inbox automatically. By default message filters are only applied automatically to the Inbox. There is an extension to do this, Filter Subfolders, but it's only for TB3. What I have tried so far is: Use the FiltaQuilla add-on to be able to filter messages for folder name. Set the string property mail.server.default.applyIncomingFilters to true. As recommended here: http://blog.mozilla.org/bcrowder/ But I can't get these filters to run automatically. I have a suspicion that filters only run automatically for incoming mail. And these are sent items. Perhaps that's it. I just don't know. On the other hand, if I run the filters manually on that folder, it does indeed move the mail. Or perhaps the issue is that these messages are saved into the Sent Items folder marked as read. Is it possible that filters are only automatically applied to unread items? If I could install an add-in that automatically ran the message filter on my folder, that would do it. Anyway, I'm at a loss now. Any suggestions are welcome. I'm not at all wedded to using filters. I just want to find a way to get these messages moved without human interaction!

  Read the article

• Network connection to Firebird 2.1 became slow after upgrading to Ubuntu 10.04

  - by lyle

  We've got a setup that we're using for different clients : a program connecting to a Firebird server on a local network. So far we mostly used 32bit processors running Ubuntu LTS (recently upgraded to 10.04). Now we introduced servers running on 64bit processors, running Ubuntu 10.04 64bit. Suddenly some queries run slower than they used to. In short: running the query locally works fine on both 64bit and 32bit servers, but when running the same queries over the network the 64bit server is suddenly much slower. We did a few checks with both local and remote connections to both 64bit and 32bit servers, using identical databases and identical queries, running in Flamerobin. Running the query locally takes a negligible amount of time: 0.008s on the 64bit server, 0.014s on the 32bit servers. So the servers themselves are running fine. Running the queries over the network, the 64bit server suddenly needs up to 0.160s to respond, while the 32bit server responds in 0.055s. So the older servers are twice as fast over the network, in spite of the newer servers being twice as fast if run locally. Apart from that the setup is identical. All servers are running the same installation of Ubuntu 10.04, same version of Firebird and so on, the only difference is that some are 64 and some 32bit. Any idea?? I tried to google it, but I couldn't find any complains that Firebird 64bit is slower than Firebird 32bit, except that the Firebird 2.1 change log mentions that there's a new network API which is twice as fast, as soon as the drivers are updated to use it. So I could imagine that the 64bit driver is still using the old API, but that's a bit of a stretch, I guess. Thanx in advance for any replies! :)

  Read the article

• Setting a time limit for a transaction in MySQL/InnoDB

  - by Trevor Burnham

  This sprang from this related question, where I wanted to know how to force two transactions to occur sequentially in a trivial case (where both are operating on only a single row). I got an answer—use SELECT ... FOR UPDATE as the first line of both transactions—but this leads to a problem: If the first transaction is never committed or rolled back, then the second transaction will be blocked indefinitely. The innodb_lock_wait_timeout variable sets the number of seconds after which the client trying to make the second transaction would be told "Sorry, try again"... but as far as I can tell, they'd be trying again until the next server reboot. So: Surely there must be a way to force a ROLLBACK if a transaction is taking forever? Must I resort to using a daemon to kill such transactions, and if so, what would such a daemon look like? If a connection is killed by wait_timeout or interactive_timeout mid-transaction, is the transaction rolled back? Is there a way to test this from the console? Clarification: innodb_lock_wait_timeout sets the number of seconds that a transaction will wait for a lock to be released before giving up; what I want is a way of forcing a lock to be released. Update: Here's a simple example that demonstrates why innodb_lock_wait_timeout is not sufficient to ensure that the second transaction is not blocked by the first: START TRANSACTION; SELECT SLEEP(55); COMMIT; With the default setting of innodb_lock_wait_timeout = 50, this transaction completes without errors after 55 seconds. And if you add an UPDATE before the SLEEP line, then initiate a second transaction from another client that tries to SELECT ... FOR UPDATE the same row, it's the second transaction that times out, not the one that fell asleep. What I'm looking for is a way to force an end to this transaction's restful slumber.

  Read the article

• Windows Server 2008 SMTP & POP3 Configuration

  - by Alex Hope O'Connor

  This is the first time I have ever configured a VPS server without 3rd party applications such as Plesk control panel. I have got most functionality working in all my websites except I am very unsure as to how I can setup my email functionality on this new server. Basically I want the standard POP3 functionality, a bunch of accounts with private boxes, all able to send and receive emails using their individual usernames and passwords. My server setup is pretty simple, its a VPS with IIS & DNS Server running. What I have tried to do to setup SMTP & POP3 is adding the SMTP Server feature through the Server Manager Console (very unsure of the configuration as guides I found did not explain), I then installed a 3rd party application called Visdeno SMTP Extender as it claims to be a POP3 service providing accounting and the ability to communicate with email clients. That is as far as I have gotten as I can not seem to find too much information on the subject. So can someone please tell me how to go about configuring these services in order to provide standard SMTP & POP3 functionality? Thanks, Alex.

  Read the article

• Using SQL to join spreadsheets in excel

  - by toms

  Based on the explenation here: How do I join two worksheets in Excel as I would in SQL? I tried to join to excel sheets from different files into the same sheet. However, I keep getting this error message when I try to refresh the table: [MICROSOFT][OBDC Excel Driver] Too few parameters. Expected 5. The SQL queries i've put in so far were: SELECT `Sheet1$`.ID, `Sheet1$`.Name, `Sheet1$`.`L Name` FROM `C:\Users\Tom\Book1.xlsx`.`Sheet1$` a LEFT JOIN `C:\Users\Tom\Book2.xlsx`.`Sheet1$` b ON a.col2= b.col2 and SELECT `Sheet1$`.ID, `Sheet1$`.Name, `Sheet1$`.`L Name` FROM `C:\Users\Tom\Book1.xlsx`.`Sheet1$` a LEFT JOIN `C:\Users\Tom\Book2.xlsx`.`Sheet1$` b ON a.`ID`= b.`ID` and SELECT * FROM `C:\Users\Tom\Book1.xlsx`.`Sheet1$` a LEFT JOIN `C:\Users\Tom\Book2.xlsx`.`Sheet1$` b ON a.`ID`= b.`ID` and a few combinations and alterations. I can't seem to find the solution. I've learned that it definitely doesn't like the SELECT *. But I can't fix it. Can anyone suggest any solution?

  Read the article

• Wrong CSS mime type with Roundcube 0.5 beta and nginx

  - by Julien Vehent

  I'm running into a CSS problem. This is a setup based on Debian Squeeze (nginx/0.7.67, php5/cgi) on which I installed the latest Roundcube 0.5 beta. PHP is properly processed, login works fine but the CSS files are not loaded and Firefox is throwing the following errors: Error: The stylesheet https://webmail.example.net:10443/roundcube/skins/default/common.css?s=1290600165 was not loaded because its MIME type, "text/html", is not "text/css". Source File: https://webmail.example.net:10443/roundcube/?_task=login Line: 0 Error: The stylesheet https://webmail.example.net:10443/roundcube/skins/default/mail.css?s=1290156319 was not loaded because its MIME type, "text/html", is not "text/css". Source File: https://webmail.example.net:10443/roundcube/?_task=login Line: 0 As far as I understand, nginx doesn't see the .css extension (because ofthe ?s= argument) and thus set the mime type with the default value, being text/html. Should I fix this in nginx (and how ?) or is it roundcube's related ? Edit: It seems that it's nginx related. The content-type isn't set for any other type than text/html. I had to include manually the following declarations to force CSS and JS content-types. That's ugly, and I never had the problem before... any idea ? location ~ \.css { add_header Content-Type text/css; } location ~ \.js { add_header Content-Type application/x-javascript; }

  Read the article

• How to write files in specific order?

  - by Bernie

  Okay, here's a weird problem -- My wife just bought a 2014 Nissan Altima. So, I took her iTunes library and converted the .m4a files to .mp3, since the car audio system only supports .mp3 and .wma. So far so good. Then I copied the files to a DOS FAT-32 formatted USB thumb drive, and connected the drive to the car's USB port, only to find all of the tracks were out of sequence. All tracks begin with a two digit numeric prefix, i.e., 01, 02, 03, etc. So you would think they would be in order. So I called Nissan Connect support and the rep told me that there is a known problem with reading files in the correct order. He said the files are read in the same order they are written. So, I manually copied a few albums with the tracks in a predetermined order, and sure enough he was correct. So I copied about 6 albums for testing, then changed to the top level directory and did a "find . music.txt". Then I passed this file to rsync like this: rsync -av --files-from=music.txt . ../Marys\ Music\ Sequenced/ The files looked like they were copied in order, but when I listed the files in order of modified time, they were in the same sequence as the original files: ../Marys Music Sequenced/Air Supply/Air Supply Greatest Hits ls -1rt 01 Lost In Love.mp3 04 Every Woman In The World.mp3 03 Chances.mp3 02 All Out Of Love.mp3 06 Here I Am (Just When I Thought I Was Over You).mp3 05 The One That You Love.mp3 08 I Want To Give It All.mp3 07 Sweet Dreams.mp3 11 Young Love.mp3 So the question is, how can I copy files listed in a file named music.txt, and copy them to a destination, and ensure the modification times are in the same sequence as the files are listed?

  Read the article

• Distributed development staff needing a common IP range

  - by bakasan

  I work on a development staff that is geographically distributed, mostly all throughout the state of CA, but several key members also must travel frequently. We rely quite heavily on a 3rd party provider API for a great deal of our subsystems (can't get into who it is or what they do). The 3rd party however is quite stringent on network access and have no notion of a development sandbox. Access is restricted to 2, 3 IP numbers and that's about it. Once we account for our production servers, that leaves us with an IP or two to spare for our dev team--which is still problematic as people's home IP changes, people travel, we have more than 2 devs, etc. Wide IP blocks are not permitted by the 3rd party. Nor will they allow dynamic DNS type services. There is no simple console to swap IPs on the fly either (e.g. if a dev's IP at home changes or they are on the road). As none of us are deep network experts, I'm wondering what our viable options are? Are there such things as 3rd party hosts to VPNs? Generally I think of a VPN as a mechanism to gain access to a home office, but the notion would be a 3rd party VPN that we'd all connect to and we'd register this as an IP origin w/ our 3rd party. We've considered using Amazon EC2 to effectively host a dev environment for each dev and using that to connect. Amazon only gives you so many static IPs however (I believe 5?) so this would only be a stop gap solution until our team size out strips our IP count at Amazon. Those were the only viable thoughts that I had, but again, I'm far from a networking guy. Tried searching for similar threads, but I'm not even sure I know the right vernacular to look around for.

  Read the article

• script to run sox to combine multiple mono tracks to stereo

  - by Ze'ev

  I have a folder full of .wav audio files. Some are stereo, most are mono splits. The mono split pairs are all named foo bar track.L.wav and foo bar track.R.wav I can use the command line tool sox to combine a mono pair into 1 stereo track like this: sox -M track1.L.wav track1.R.wav track1.Stereo.wav where the first 2 files are the mono pairs, and the third is the output stereo file. This is great, but I'd like to have a script that will automatically find all the mono pairs and combine them into stereo files. I.e., I need it to find all files which have the same name except for the .L. and .R. before the extension, and run sox on them, outputting to a new file with the same name without the L/R suffix. For example, if my folder contains these files: track1.L.wav track2.L.wav track3.L.wav track4.L.wav track1.R.wav track2.R.wav track3.R.wav track4.R.wav track6.wav track7.wav I need to run these commands: sox -M track1.L.wav track1.R.wav track1.Stereo.wav sox -M track2.L.wav track2.R.wav track2.Stereo.wav sox -M track3.L.wav track3.R.wav track3.Stereo.wav sox -M track4.L.wav track4.R.wav track4.Stereo.wav Here's where I am so far: for file in ./*.L.wav; do file2=`echo $file | sed 's_\(.*\).L.wav_\1.R.wav_'`; out=`echo $file | sed 's_\(.*\).L.wav_\1.STEREO.wav_'`; echo $file - $file2 - $out; done That works, but when I replace the echo line with sox -M $file $file2 $out; it doesn't work; spaces in the filenames cause it to fail.

  Read the article

• chef clients behind firewall

  - by tec

  I am currently learning about chef. What I understood so far: I have to install chef-server on an own server or use the hosted chef. I have to install chef-client on the servers that I want to manage aka nodes (manually or using knife bootstrap). I installed several chef tools on my own PC that I can use to manage the nodes, e.g. knife. Now in my case the specialty is that the nodes are behind a firewall/load balancer/proxy. The nodes can access servers on the outside via NAT (http works and I can configure chef-specific hosts to work as well). However they can only be contacted from the outside via a ssh tunnel. There is really much documentation about chef available but I did not find an answer to these questions: When using knife, is it enough when I set up a ssh tunnel manually on my own PC or does the chef server need to contact the nodes? When using knife, can I configure it to setup a ssh tunnel automatically? When using the chef server web ui can I configure it to connect to the nodes via ssh tunnel or do I need a setup where I setup the tunnel myself e.g. using monit? Is this even possible with hosted chef? Instead of using knife or the web ui: Can I issue the same management commands directly on the nodes using chef-client? What solution would you recommend? Thanks a lot for taking your time to help and answering one or more of these related questions

  Read the article

• Disabling mouse acceleration in Mac OS X

  - by aib

  I've been looking for a solution to the unusable mouse problem in Mac OS X for ages. I've tried a gazillion programs and fiddled with every setting there is or there can be added. So far, I haven't found a way to get linear mouse response in Mac OS X. At this point I'm seriously considering installing another operating system. But before I do that, or go hacking around OS binaries, maybe someone here has a solution? I want linear mouse response. I want high sensitivity. I like my touchpad acceleration and would like to keep it if possible. Any ideas? P.S. I've been at this for a long time, I'll probably have already tried the most popular answers. I'm running Mac OS X 10.6.5 on a MacBook Pro. I don't use a particular brand of mouse. I'm not looking for any commercial solutions. I've tried: Mouse Acceleration Preferences Pane, the Snow Leopard version of which can get me close to a linear response, but at the cost of tracking speed (sensitivity). Answers on this question: Make Mac OS X mouse acceleration more Windows-like About every code snippet I found via Google.

  Read the article

• Server and Network Lag

  - by DanSpd

  At my home I have a server and my computer. Server has Windows Server 2008 Standart 64 bit installed and then my computer has Windows 7 64 bit installed. My home router is DIR-615 My server has a game server installed on it and basically total open connections on server are around 700. Once its around 700 server and then whole home network lags really badly. My internet connection is good and only around 600kb/s is being used out of 2mb/s (real download/upload speeds). So far I assume that my router has a connection limit and with server + my computer connections it peaks at around 1k and lags everything. Another assumption server lag comes from connection limit. On the internet I have read that standart version of server has connection limit of 700 + 10 reserved. I do not rmember where I found that information but it was on microsoft website. So I have two options. First is to upgrade my router to Netgear FVS318G-100 and second is to change connections limit on server. Any advices? Thank you

  Read the article

• Server and Network Lag

  - by DanSpd

  At my home I have a server and my computer. Server has Windows Server 2008 Standart 64 bit installed and then my computer has Windows 7 64 bit installed. My home router is DIR-615 My server has a game server installed on it and basically total open connections on server are around 700. Once its around 700 server and then whole home network lags really badly. My internet connection is good and only around 600kb/s is being used out of 2mb/s (real download/upload speeds). So far I assume that my router has a connection limit and with server + my computer connections it peaks at around 1k and lags everything. Another assumption server lag comes from connection limit. On the internet I have read that standart version of server has connection limit of 700 + 10 reserved. I do not rmember where I found that information but it was on microsoft website. So I have two options. First is to upgrade my router to Netgear FVS318G-100 and second is to change connections limit on server. Any advices? Thank you

  Read the article

• CD and DVD burning very slow with LG DVD Burner

  - by Om Nom Nom

  I have an HP m7560in Desktop which came with an LG DVD burner. As far back as I can remember, it has been having problems in burning discs. It used to take about one and a half hour to burn 4 GB of data on a blank DVD-R. I am using Nero and ImgBurn and I usually select 8x speed for burning. I used to run XP earlier and now I run Windows 7 on it, but I face the problem on both. I have already checked that DMA mode is selected in the IDE controllers' properties. On XP, uninstalling the IDE controllers and DVD drive from the Device Manager, rebooting and letting it install the drivers again fixed the problem for a while, but after a couple reboots, the problem used to come back. On Windows 7, even doing that is not fixing the problem. In fact, in Windows 7, the burning process doesn't even begin. Imgburn gets stuck on the first stage (of writing Lead-In), and it never progresses until I turn off / reset the computer. I checked the disc info after this happened, and the disc still shows empty and ready to be burned on, so it's obvious that it didn't even touch the disc. I have already had the drive replaced once by HP, but it didn't fix the problem. Do you guys have any suggestions? (Note that Windows Updates doesn't give any newer driver for the controllers, or any other components for that matter).

  Read the article

< Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >