Search Results

Search found 11608 results on 465 pages for 'usb extension'.

Page 410/465 | < Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >

• Building ATLAS (and later Octave w/ ATLAS)

  - by David Parks

  I'm trying to set up ATLAS (so I can later compile octave with ATLAS support). If I'm correct, I still need to build this manually due to the environment specific optimizations. I do see a package for ATLAS, but it looks like it's using the cross platform generic build options (e.g. "it'll be slow"). So, running the configure script as described in the docs seems to go poorly. As a java developer I never do well at making heads or tails of errors in these build processes. Am I missing dependencies (if so is there any documentation on what I need)? allusers@vbubuntu:~/Downloads/atlas3.10.1/build_vbubuntu$ ../configure -b 64 -D c -DPentiumCPS=3000 --with-netlib-lapack-tarfile=/home/allusers/Downloads/lapack-3.5.0.tgz make: `xconfig' is up to date. ./xconfig -d s /home/allusers/Downloads/atlas3.10.1/build_vbubuntu/../ -d b /home/allusers/Downloads/atlas3.10.1/build_vbubuntu -b 64 -D c -DPentiumCPS=3000 -Si lapackref 1 OS configured as Linux (1) Assembly configured as GAS_x8664 (2) Vector ISA Extension configured as SSE3 (6,448) ERROR: enum fam=3, chip=2, mach=0 make[3]: *** [atlas_run] Error 44 make[2]: *** [IRunArchInfo_x86] Error 2 Architecture configured as Corei1 (25) ERROR: enum fam=3, chip=2, mach=0 make[3]: *** [atlas_run] Error 44 make[2]: *** [IRunArchInfo_x86] Error 2 Clock rate configured as 2350Mhz ERROR: enum fam=3, chip=2, mach=0 make[3]: *** [atlas_run] Error 44 make[2]: *** [IRunArchInfo_x86] Error 2 Maximum number of threads configured as 4 Parallel make command configured as '$(MAKE) -j 4' ERROR: enum fam=3, chip=2, mach=0 make[3]: *** [atlas_run] Error 44 make[2]: *** [IRunArchInfo_x86] Error 2 Cannot detect CPU throttling. rm -f config1.out make atlas_run atldir=/home/allusers/Downloads/atlas3.10.1/build_vbubuntu exe=xprobe_comp redir=config1.out \ args="-v 0 -o atlconf.txt -O 1 -A 25 -Si nof77 0 -V 448 -b 64 -d b /home/allusers/Downloads/atlas3.10.1/build_vbubuntu" make[1]: Entering directory `/home/allusers/Downloads/atlas3.10.1/build_vbubuntu' cd /home/allusers/Downloads/atlas3.10.1/build_vbubuntu ; ./xprobe_comp -v 0 -o atlconf.txt -O 1 -A 25 -Si nof77 0 -V 448 -b 64 -d b /home/allusers/Downloads/atlas3.10.1/build_vbubuntu > config1.out make[2]: gfortran: Command not found make[2]: *** [IRunF77Comp] Error 127 make[2]: g77: Command not found make[2]: *** [IRunF77Comp] Error 127 make[2]: f77: Command not found make[2]: *** [IRunF77Comp] Error 127 Unable to find usable compiler for F77; abortingMake sure compilers are in your path, and specify good compilers to configure (see INSTALL.txt or 'configure --help' for details)make[1]: *** [atlas_run] Error 8 make[1]: Leaving directory `/home/allusers/Downloads/atlas3.10.1/build_vbubuntu' make: *** [IRun_comp] Error 2 ERROR 512 IN SYSCMND: 'make IRun_comp args="-v 0 -o atlconf.txt -O 1 -A 25 -Si nof77 0 -V 448 -b 64"' mkdir src bin tune interfaces mkdir: cannot create directory ‘src’: File exists mkdir: cannot create directory ‘bin’: File exists mkdir: cannot create directory ‘tune’: File exists mkdir: cannot create directory ‘interfaces’: File exists make: *** [make_subdirs] Error 1 make -f Make.top startup make[1]: Entering directory `/home/allusers/Downloads/atlas3.10.1/build_vbubuntu' Make.top:1: Make.inc: No such file or directory Make.top:325: warning: overriding commands for target `/AtlasTest' Make.top:76: warning: ignoring old commands for target `/AtlasTest' make[1]: *** No rule to make target `Make.inc'. Stop. make[1]: Leaving directory `/home/allusers/Downloads/atlas3.10.1/build_vbubuntu' make: *** [startup] Error 2 mv: cannot move ‘lapack-3.5.0’ to ‘../reference/lapack-3.5.0’: Directory not empty mv: cannot stat ‘lib/Makefile’: No such file or directory ../configure: 450: ../configure: cannot create lib/Makefile: Directory nonexistent ../configure: 451: ../configure: cannot create lib/Makefile: Directory nonexistent ../configure: 452: ../configure: cannot create lib/Makefile: Directory nonexistent ../configure: 453: ../configure: cannot create lib/Makefile: Directory nonexistent ../configure: 509: ../configure: cannot create lib/Makefile: Directory nonexistent DONE configure

  Read the article

• [Silverlight] How to watermark a WriteableBitmap with a text

  - by Benjamin Roux

  Hello, In my current project, I needed to watermark a WriteableBitmap with a text. As I couldn’t find anything I decided to create a small extension method to do so. public static class WriteableBitmapEx { /// <summary> /// Creates a watermark on the specified image /// </summary> /// <param name="input">The image to create the watermark from</param> /// <param name="watermark">The text to watermark</param> /// <param name="color">The color - default is White</param> /// <param name="fontSize">The font size - default is 50</param> /// <param name="opacity">The opacity - default is 0.25</param> /// <param name="hasDropShadow">Specifies if a drop shadow effect must be added - default is true</param> /// <returns>The watermarked image</returns> public static WriteableBitmap Watermark(this WriteableBitmap input, string watermark, Color color = default(Color), double fontSize = 50, double opacity = 0.25, bool hasDropShadow = true) { var watermarked = GetTextBitmap(watermark, fontSize, color == default(Color) ? Colors.White : color, opacity, hasDropShadow); var width = watermarked.PixelWidth; var height = watermarked.PixelHeight; var result = input.Clone(); var position = new Rect(input.PixelWidth - width - 20 /* right margin */, input.PixelHeight - height, width, height); result.Blit(position, watermarked, new Rect(0, 0, width, height)); return result; } /// <summary> /// Creates a WriteableBitmap from a text /// </summary> /// <param name="text"></param> /// <param name="fontSize"></param> /// <param name="color"></param> /// <param name="opacity"></param> /// <param name="hasDropShadow"></param> /// <returns></returns> private static WriteableBitmap GetTextBitmap(string text, double fontSize, Color color, double opacity, bool hasDropShadow) { TextBlock txt = new TextBlock(); txt.Text = text; txt.FontSize = fontSize; txt.Foreground = new SolidColorBrush(color); txt.Opacity = opacity; if (hasDropShadow) txt.Effect = new DropShadowEffect(); WriteableBitmap bitmap = new WriteableBitmap((int)txt.ActualWidth, (int)txt.ActualHeight); bitmap.Render(txt, null); bitmap.Invalidate(); return bitmap; } } For this code to run, you need the WritableBitmapEx library. As you can see, it’s quite simple. You just need to call the Watermark method and pass it the text you want to add in your image. You can also pass optional parameters like the color, the opacity, the fontsize or if you want a drop shadow effect. I could have specify other parameters like the position or the the font family but you can change the code if you need to. Here’s what it can give Hope this helps.

  Read the article

• Windows Azure Recipe: Consumer Portal

  - by Clint Edmonson

  Nearly every company on the internet has a web presence. Many are merely using theirs for informational purposes. More sophisticated portals allow customers to register their contact information and provide some level of interaction or customer support. But as our understanding of how consumers use the web increases, the more progressive companies are taking advantage of social web and rich media delivery to connect at a deeper level with the consumers of their goods and services. Drivers Cost reduction Scalability Global distribution Time to market Solution Here’s a sketch of how a Windows Azure Consumer Portal might be built out: Ingredients Web Role – this will host the core of the solution. Each web role is a virtual machine hosting an application written in ASP.NET (or optionally php, or node.js). The number of web roles can be scaled up or down as needed to handle peak and non-peak traffic loads. Database – every modern web application needs to store data. SQL Azure databases look and act exactly like their on-premise siblings but are fault tolerant and have data redundancy built in. Access Control (optional) – if identity needs to be tracked within the solution, the access control service combined with the Windows Identity Foundation framework provides out-of-the-box support for several social media platforms including Windows LiveID, Google, Yahoo!, Facebook. It also has a provider model to allow integration with other platforms as well. Caching (optional) – for sites with high traffic with lots of read-only data and lists, the distributed in-memory caching service can be used to cache and serve up static data at higher scale and speed than direct database requests. It can also be used to manage user session state. Blob Storage (optional) – for sites that serve up unstructured data such as documents, video, audio, device drivers, and more. The data is highly available and stored redundantly across data centers. Each entry in blob storage is provided with it’s own unique URL for direct access by the browser. Content Delivery Network (CDN) (optional) – for sites that service users around the globe, the CDN is an extension to blob storage that, when enabled, will automatically cache frequently accessed blobs and static site content at edge data centers around the world. The data can be delivered statically or streamed in the case of rich media content. Training Labs These links point to online Windows Azure training labs where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

  Read the article

• Windows Azure Recipe: Social Web / Big Media

  - by Clint Edmonson

  With the rise of social media there’s been an explosion of special interest media web sites on the web. From athletics to board games to funny animal behaviors, you can bet there’s a group of people somewhere on the web talking about it. Social media sites allow us to interact, share experiences, and bond with like minded enthusiasts around the globe. And through the power of software, we can follow trends in these unique domains in real time. Drivers Reach Scalability Media hosting Global distribution Solution Here’s a sketch of how a social media application might be built out on Windows Azure: Ingredients Traffic Manager (optional) – can be used to provide hosting and load balancing across different instances and/or data centers. Perfect if the solution needs to be delivered to different cultures or regions around the world. Access Control – this service is essential to managing user identity. It’s backed by a full blown implementation of Active Directory and allows the definition and management of users, groups, and roles. A pre-built ASP.NET membership provider is included in the training kit to leverage this capability but it’s also flexible enough to be combined with external Identity providers including Windows LiveID, Google, Yahoo!, and Facebook. The provider model has extensibility points to hook into other identity providers as well. Web Role – hosts the core of the web application and presents a central social hub users. Database – used to store core operational, functional, and workflow data for the solution’s web services. Caching (optional) – as a web site traffic grows caching can be leveraged to keep frequently used read-only, user specific, and application resource data in a high-speed distributed in-memory for faster response times and ultimately higher scalability without spinning up more web and worker roles. It includes a token based security model that works alongside the Access Control service. Tables (optional) – for semi-structured data streams that don’t need relational integrity such as conversations, comments, or activity streams, tables provide a faster and more flexible way to store this kind of historical data. Blobs (optional) – users may be creating or uploading large volumes of heterogeneous data such as documents or rich media. Blob storage provides a scalable, resilient way to store terabytes of user data. The storage facilities can also integrate with the Access Control service to ensure users’ data is delivered securely. Content Delivery Network (CDN) (optional) – for sites that service users around the globe, the CDN is an extension to blob storage that, when enabled, will automatically cache frequently accessed blobs and static site content at edge data centers around the world. The data can be delivered statically or streamed in the case of rich media content. Training These links point to online Windows Azure training labs and resources where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

  Read the article

• What DX level does my graphics card support? Does it go to 11?

  - by Daniel Moth

  Recently I run into a situation that I have run into quite a few times. Someone encounters a machine and the question arises: "Is there a DirectX 11 card in this machine?". Typically the reason you are interested in that is because cards with DirectX 11 drivers fully support DirectCompute (and by extension C++ AMP) for GPGPU programming. The driver specifically is WDDM (1.1 on Windows 7 and Windows 8 introduces WDDM 1.2 with cool new capabilities). There are many ways for figuring out if you have a DirectX11 card, so here are the approaches that you can use, with a bonus right at the end of the post. Run DxDiag WindowsKey + R, type DxDiag and hit Enter. That is the DirectX diagnostic tool, which unfortunately, only tells you on the "System" tab what is the highest version of DirectX installed on your machine. So if it reports DirectX 11, that doesn't mean you have a DX11 driver! The "Display" tab has a promising "DDI version" label, but unfortunately that doesn't seem to be accurate on the machines I've tested it with (or I may be misinterpreting its use). Either way, this tool is not the one you want for this purpose, although it is good for telling you the WDDM version among other things. Use the Microsoft hardware page There is a Microsoft Windows 7 compatibility center, that lists all hardware (tip: use the advanced search) and you could try and locate your device there… good luck. Use Wikipedia or the hardware vendor's website Use the Wikipedia page for the vendor cards, for both nvidia and amd. Often this information will also be in the specifications for the cards on the IHV site, but is is nice that wikipedia has a single page per vendor that you can search etc. There is a column in the tables for API support where you can see the DirectX version. Check if it is one of these recommended DX11 cards You may not have a DirectX 11 card and are interested in purchasing one. While I am in no position to make recommendations, I will list here some cards from two big IHVs that we know are DirectX 11 capable. Some AMD (aka ATI) cards Low end, inexpensive DX11 hardware: Radeon 5450, 5550, 6450, 6570 Mid range (decent perf, single precision): Radeon 5750, 5770, 6770, 6790 High end (capable of double precision): Radeon 5850, 5870, 6950, 6970 Single precision APUs: AMD E-Series APUs AMD A-Series APUs Some NVIDIA cards Low end, inexpensive DX11 hardware: GeForce GT430, GT 440, GT520, GTS 450 Quadro 400, 600 Mid-range (decent perf, single precision): GeForce GTX 460, GTX 550 Ti, GTX 560, GTX 560 Ti Quadro 2000 High end (capable of double precision): GeForce GTX 480, GTX 570, GTX 580, GTX 590, GTX 595 Quadro 4000, 5000, 6000 Tesla C2050, C2070, C2075 Get the DirectX SDK and run DirectX Caps Viewer Download and install the June 2010 DirectX SDK. As part of that you now have the DirectX Capabilities Viewer utility (find it in your start menu by searching for "DirectX Caps Viewer", the filename is DXCapsViewer.exe). It will list all your devices (emulated, and real hardware ones) under the first node. Expand the hardware entries and then expand again the Direct3D 11 folder. If you see D3D_FEATURE_LEVEL_11_ under that, then your card supports feature level 11 which means it supports DirectCompute and C++ AMP. In the following screenshot of one of my old laptops, the card only goes to feature level 10. Run a utility from the web that just tells you! Of course, writing some C++ AMP code that enumerates accelerators and lists the ones that are capable is trivial. However that requires that you have redistributed the runtime, so a more broadly applicable approach is to use the DX APIs directly to enumerate the DX11 capable cards. That is exactly what the development lead for C++ AMP has done and he describes and shares that utility at this post. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• How Do You Actually Model Data?

  Since the 1970’s Developers, Analysts and DBAs have been able to represent concepts and relations in the form of data through the use of generic symbols.  But what is data modeling?  The first time I actually heard this term I could not understand why anyone would want to display a computer on a fashion show runway. Hey, what do you expect? At that time I was a freshman in community college, and obviously this was a long time ago.  I have since had the chance to learn what data modeling truly is through using it. Data modeling is a process of breaking down information and/or requirements in to common categories called objects. Once objects start being defined then relationships start to form based on dependencies found amongst other existing objects.  Currently, there are several tools on the market that help data designer actually map out objects and their relationships through the use of symbols and lines.  These diagrams allow for designs to be review from several perspectives so that designers can ensure that they have the optimal data design for their project and that the design is flexible enough to allow for potential changes and/or extension in the future. Additionally these basic models can always be further refined to show different levels of details depending on the target audience through the use of three different types of models. Conceptual Data Model(CDM)Conceptual Data Models include all key entities and relationships giving a viewer a high level understanding of attributes. Conceptual data model are created by gathering and analyzing information from various sources pertaining to a project during the typical planning phase of a project. Logical Data Model (LDM)Logical Data Models are conceptual data models that have been expanded to include implementation details pertaining to the data that it will store. Additionally, this model typically represents an origination’s business requirements and business rules by defining various attribute data types and relationships regarding each entity. This additional information can be directly translated to the Physical Data Model which reduces the actual time need to implement it. Physical Data Model(PDMs)Physical Data Model are transformed Logical Data Models that include the necessary tables, columns, relationships, database properties for the creation of a database. This model also allows for considerations regarding performance, indexing and denormalization that are applied through database rules, data integrity. Further expanding on why we actually use models in modern application/database development can be seen in the benefits that data modeling provides for data modelers and projects themselves, Benefits of Data Modeling according to Applied Information Science Abstraction that allows data designers remove concepts and ideas form hard facts in the form of data. This gives the data designers the ability to express general concepts and/or ideas in a generic form through the use of symbols to represent data items and the relationships between the items. Transparency through the use of data models allows complex ideas to be translated in to simple symbols so that the concept can be understood by all viewpoints and limits the amount of confusion and misunderstanding. Effectiveness in regards to tuning a model for acceptable performance while maintaining affordable operational costs. In addition it allows systems to be built on a solid foundation in terms of data. I shudder at the thought of a world without data modeling, think about it? Data is everywhere in our lives. Data modeling allows for optimizing a design for performance and the reduction of duplication. If one was to design a database without data modeling then I would think that the first things to get impacted would be database performance due to poorly designed database and there would be greater chances of unnecessary data duplication that would also play in to the excessive query times because unneeded records would need to be processed. You could say that a data designer designing a database is like a box of chocolates. You will never know what kind of database you will get until after it is built.

  Read the article

• First Impressions of a MacBook (from a PC guy)

  - by dgreen

  Disclaimer: I've been a PC guy my entire working career. I'd probably characterize myself as a power user. Never afraid to bust out the console line. But working with a Mac is totally foreign to me. So for those Mac guys who are curious, this is how your world appears from the outside to a computer literate person :)My Macbook Air has arrived! And it's a thing of beauty:First, the specs: 13" MacBook Air, 2.0GHz Core i7 processor. Upgraded to 8GB of RAM for an additional $100, SSD flash storage  = 256GB. The plan is ultimately to use this baby for some iOS development but also some decent lifting in Windows with Visual Studio. Done a lot of reading  and between VMWare Fusion, Parallels and Bootcamp...I'm going to go with VMWare Fusion for $49.99And now my impressions (please re-read disclaimer before proceeding!):I open the box and am trying to understand exactly how the magsafe connector works (and how to disconnect it).  Why does it have two socket outlet plugs? Who knows.  I feel like Hansel in Zoolander. The files are "in" the computer.Stuck in my external hard drive (usb). So how do I get to the files? To the Googles!Argh...it can't read my external NTFS drive. Fat32 can't support field over 4GB…problematic since some of my existing VMWare image files are much larger than 4GB. Didn't see this coming.Three year old loves iPhoto. Super easy to use. Don't even know what I'm doing but I've already (accidentally) discovered the image filtering options. Fun stuff.First thing I downloaded ever => Chrome. I need something to ground me, something familiar. My token, if you will (sorry, gratuitous Inception joke).Ok, I get it… Finder == windows explorer. But where is my hierarchical structure? I miss the tree :(On that note, yeah…how do I see what "path" my files reside in? I'm afraid to know the answer. You know what scares more though…this notion of a smart folder. Feel like the godfather - just get the job done, I don't care how you handle it, I don't want to know...just get it done. What the hell is AirDrop?Mail…just worked. Still in shock that they have a free client for yahoo mail (please no yahoo jokes).mail -> deleting a message takes 5 seconds. Have they heard of async?"Command" key instead of "Control" ok, then what the $%&^! is the control key for then"aliases" == shortcuts I thinkI don't see the file system. And I'm scared. All these things I'm downloading…these .dmg files (bad name) where are they going? Can't seem to delete when they're doneUgh...realized need to buy a mini-to-vga adaptor if I want to use my external monitor ($13 on ebay, $39 in apple store).Windows docking is trickiest for me…this notion of detached windows with a menu bar at the top. I don't like this paradigm, it's confusing. But maybe because I've been using Windows for too long.Evernote, Dropbox desktop clients seem almost identical…few quirks here and there I need to get used to.iTunes is still a bit gross. In a weird way it's actually worse on a Mac if thats possible. This is not the MacBook's fault…this is a software design issue. Overall: UI will take some getting used to. Can't decide if this represents the future and I'm stuck in the past…or this is the past and I've been spoiled by the future (which would be Windows…don't be hating I happen to be very productive in Win7)  So there you go - my 90 minute first impression of the MacBook universe.

  Read the article

• Very slow KVM in Ubuntu 12.04

  - by Guy Fawkes

  I use Ubuntu 12.04 64-bit and KVM, my CPU is Core i5 3.3 GHz and I have 8 GB of DDR3 RAM. I run Windows 7 in KVM and it's extremely slow. My co-worker use Debian on the same PC configuration and can run Windows 7 extremely fast! Where can be my problem? sudo cat /etc/libvirt/qemu/windows.xml <!-- WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE OVERWRITTEN AND LOST. Changes to this xml configuration should be made using: virsh edit windows or other application using the libvirt API. --> <domain type='kvm'> <name>windows</name> <uuid>5c685175-baea-0ca6-591f-8269d923ffb8</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='localtime'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/windows.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='network'> <mac address='52:54:00:94:63:91'/> <source network='default'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> <input type='tablet' bus='usb'/> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='ich6'> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </sound> <video> <model type='vga' vram='262144' heads='1'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0'/> </memballoon> </devices> </domain>

  Read the article

• Exalytics and Oracle Business Intelligence Enterprise Edition (OBIEE) Partner Workshop

  - by mseika

  Workshop Description Oracle Fusion Middleware 11g is the #1 application infrastructure foundation. It enables enterprises to create and run agile and intelligent business applications and maximize IT efficiency by exploiting modern hardware and software architectures. Oracle Exalytics Business Intelligence Machine is the world’s first engineered system specifically designed to deliver high performance analysis, modeling and planning. Built using industry-standard hardware, market-leading business intelligence software and in-memory database technology, Oracle Exalytics is an optimized system that delivers unmatched speed, visualizations and scalability for Business Intelligence and Enterprise Performance Management applications. This FREE hands-on, partner workshop highlights both the hardware and software components that are engineered to work together to deliver Oracle Exalytics - an optimized version of the industry-leading Oracle TimesTen In-Memory Database with analytic extensions, a highly scalable Oracle server designed specifically for in-memory business intelligence, and Oracle’s proven Business Intelligence Foundation with enhanced visualization capabilities and performance optimizations. This workshop will provide hands-on experience with Oracle's latest engineered system. Topics covered will include TimesTen In-Memory Database and the new Summary Advisor for Exalytics, the technical details (including mobile features) of the latest release of visualization enhancements for OBI-EE, and technical updates on Essbase. After taking this course, you will be well prepared to architect, build, demo, and implement an end-to-end Exalytics solution. You will also be able to extend your current analytical and enterprise performance management application implementations with numerous Oracle technologies specifically enhanced to take advantage of the compute capacity and in-memory capabilities of Oracle Exalytics.If you are a BI or Data Warehouse Architect, developer or consultant, you don’t want to miss this 3-day workshop. Register Now! Presentations Exalytics Architectural Overview Upgrade and Lifecycle Management Times Ten for Exalytics Summary Advisor Utility Essbase and EPM System on Exalytics Dashboard and Analysis Interactions OBIEE 11.1.1.6 Features and Advanced Topics Lab OutlineThe labs showcase Oracle Exalytics core components and functionality and provide expertise of Oracle Business Intelligence 11.1.1.6 new features and updates from prior releases. The hands-on activities are based on an Oracle VirtualBox image with software and training samples pre-installed. Lab Environment Setup Creating and Working with Oracle TimesTen In-Memory Database Running Summary Advisor Utility Working with Exalytics Visualization Features – Dashboard and Analysis Interactions Audience Oracle Partners BI and EPM Application Developers and Implementers System Integrators and Solution Consultants Data Warehouse Developers Enterprise Architects Prerequisites Experience and understanding of OBIEE 11g is required Previous attendance of Oracle Business Intelligence Foundation Suite Workshop or BIEE 11gIntroduction Workshop is highly recommended Good understanding of data warehousing and data modeling for reporting and analysis purpose Strong experience with database technologies preferred Equipment RequirementsThis workshop requires attendees to provide their own laptops for this class.Attendee laptops must meet the following minimum hardware/software requirements: Hardware Minimum 8GB RAM 60 GB free space (includes staging) USB 2.0 port (at least one available) It is strongly recommended that you bring a mouse. You will be working in a development environment and using the mouse heavily. Software One of the following operating systems: 64-bit Windows host/laptop OS 64-bit host/laptop OS with a Windows VM (XP, Server, or Win 7, BIC2g, etc.) Internet Explorer 7.x/8.x or Firefox 3.5.x WINRAR or 7ziputility to unzip workshop files: Download-able from http://www.win-rar.com/download.html Download-able from http://www.7zip.com/ Oracle VirtualBox 4.0.2 or higher Downloadable from http://www.virtualbox.org/wiki/Downloads CPU virtualization mode needs to be enabled. We will provide guidance on the day of the workshop. Attendees will be given a VirtualBox image containing a pre-installed Oracle Exalytics environment. Schedule This workshop is 3 days. - Times vary by country!9:00am: Sign-in and technical setup 9:30am: Workshop starts 5:00pm: Workshop ends Oracle Exalytics and Business Intelligence (OBIEE) Workshop December 11-13, 2012: Oracle BVP, Birmingham, UK Register Here. Questions? Send email to: [email protected] Oracle Platform Technologies Enablement Services

  Read the article

• Handling "related" work within a single agile work item

  - by Tesserex

  I'm on a project team of 4 devs, myself included. We've been having a long discussion on how to handle extra work that comes up in the course of a single work item. This extra work is usually things that are slightly related to the task, but not always necessary to accomplish the goal of the item (that may be an opinion). Examples include but are not limited to: refactoring of the code changed by the work item refactoring code neighboring the code changed by the item re-architecting the larger code area around the ticket. For example if an item has you changing a single function, you realize the entire class now could be redone to better accommodate this change. improving the UI on a form you just modified When this extra work is small we don't mind. The problem is when this extra work causes a substantial extension of the item beyond the original feature point estimation. Sometimes a 5 point item will actually take 13 points of time. In one case we had a 13 point item that in retrospect could have been 80 points or more. There are two options going around in our discussion for how to handle this. We can accept the extra work in the same work item, and write it off as a mis-estimation. Arguments for this have included: We plan for "padding" at the end of the sprint to account for this sort of thing. Always leave the code in better shape than you found it. Don't check in half-assed work. If we leave refactoring for later, it's hard to schedule and may never get done. You are in the best mental "context" to handle this work now, since you're waist deep in the code already. Better to get it out of the way now and be more efficient than to lose that context when you come back later. We draw a line for the current work item, and say that the extra work goes into a separate ticket. Arguments include: Having a separate ticket allows for a new estimation, so we aren't lying to ourselves about how many points things really are, or having to admit that all of our estimations are terrible. The sprint "padding" is meant for unexpected technical challenges that are direct barriers to completing the ticket requirements. It is not intended for side items that are just "nice-to-haves". If you want to schedule refactoring, just put it at the top of the backlog. There is no way for us to properly account for this stuff in an estimation, since it seems somewhat arbitrary when it comes up. A code reviewer might say "those UI controls (which you actually didn't modify in this work item) are a bit confusing, can you fix that too?" which is like an hour, but they might say "Well if this control now inherits from the same base class as the others, why don't you move all of this (hundreds of lines of) code into the base and rewire all this stuff, the cascading changes, etc.?" And that takes a week. It "contaminates the crime scene" by adding unrelated work into the ticket, making our original feature point estimates meaningless. In some cases, the extra work postpones a check-in, causing blocking between devs. Some of us are now saying that we should decide some cut off, like if the additional stuff is less than 2 FP, it goes in the same ticket, if it's more, make it a new ticket. Since we're only a few months into using Agile, what's the opinion of all the more seasoned Agile veterans around here on how to handle this?

  Read the article

• Schizophrenic Ubuntu 12.10-12.04: Atheros 922 PCI WIFI is disabled in Unity but enabled in terminal - How to getit to work?

  - by zewone

  I am trying to get my PCI Wireless Atheros 922 card to work. It is disabled in Unity: both the network utility and the desktop (see screenshot http://www.amisdurailhalanzy.be/Screenshot%20from%202012-10-25%2013:19:54.png) I tried many different advises on many different forums. Installed 12.10 instead of 12.04, enabled all interfaces... etc. I have read about the aht9 driver... The terminal shows no hw or sw lock for the Atheros card, nevertheless, it is still disabled. Nothing worked so far, the card is still disabled. Any help is much appreciated. Here are more tech details: myuser@adri1:~$ sudo lshw -C network *-network:0 DISABLED description: Wireless interface product: AR922X Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 2 bus info: pci@0000:03:02.0 logical name: wlan1 version: 01 serial: 00:18:e7:cd:68:b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.5.0-17-generic firmware=N/A latency=168 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:d8000000-d800ffff *-network:1 description: Ethernet interface product: VT6105/VT6106S [Rhine-III] vendor: VIA Technologies, Inc. physical id: 6 bus info: pci@0000:03:06.0 logical name: eth0 version: 8b serial: 00:11:09:a3:76:4a size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.0 duplex=half latency=32 link=no maxlatency=8 mingnt=3 multicast=yes port=MII speed=10Mbit/s resources: irq:18 ioport:d300(size=256) memory:d8013000-d80130ff *-network DISABLED description: Wireless interface physical id: 1 bus info: usb@1:8.1 logical name: wlan0 serial: 00:11:09:51:75:36 capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=3.5.0-17-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg myuser@adri1:~$ sudo rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy1: Wireless LAN Soft blocked: no Hard blocked: yes 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no myuser@adri1:~$ dmesg | grep wlan0 [ 15.114235] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready myuser@adri1:~$ dmesg | egrep 'ath|firm' [ 14.617562] ath: EEPROM regdomain: 0x30 [ 14.617568] ath: EEPROM indicates we should expect a direct regpair map [ 14.617572] ath: Country alpha2 being used: AM [ 14.617575] ath: Regpair used: 0x30 [ 14.637778] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control' [ 14.639410] Registered led device: ath9k-phy0 myuser@adri1:~$ dmesg | grep wlan1 [ 15.119922] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready myuser@adri1:~$ lspci -nn | grep 'Atheros' 03:02.0 Network controller [0280]: Atheros Communications Inc. AR922X Wireless Network Adapter [168c:0029] (rev 01) myuser@adri1:~$ sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:11:09:a3:76:4a inet addr:192.168.2.2 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::211:9ff:fea3:764a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5457 errors:0 dropped:0 overruns:0 frame:0 TX packets:2548 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3425684 (3.4 MB) TX bytes:282192 (282.1 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:590 errors:0 dropped:0 overruns:0 frame:0 TX packets:590 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:53729 (53.7 KB) TX bytes:53729 (53.7 KB) myuser@adri1:~$ sudo iwconfig wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on lo no wireless extensions. eth0 no wireless extensions. wlan1 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off myuser@adri1:~$ lsmod | grep "ath9k" ath9k 116549 0 mac80211 461161 3 rt2x00usb,rt2x00lib,ath9k ath9k_common 13783 1 ath9k ath9k_hw 376155 2 ath9k,ath9k_common ath 19187 3 ath9k,ath9k_common,ath9k_hw cfg80211 175375 4 rt2x00lib,ath9k,mac80211,ath myuser@adri1:~$ iwlist scan wlan0 Failed to read scan data : Network is down lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. wlan1 Failed to read scan data : Network is down myuser@adri1:~$ lsb_release -d Description: Ubuntu 12.10 myuser@adri1:~$ uname -mr 3.5.0-17-generic i686  Any help much appreciated... Thanks, Philippe

  Read the article

• Using T4 to generate Configuration classes

  - by Justin Hoffman

  I wanted to try to use T4 to read a web.config and generate all of the appSettings and connectionStrings as properties of a class.  I elected in this template only to output appSettings and connectionStrings but you can see it would be easily adapted for app specific settings, bindings etc.  This allows for quick access to config values as well as removing the potential for typo's when accessing values from the ConfigurationManager. One caveat: a developer would need to remember to run the .tt file after adding an entry to the web.config.  However, one would quickly notice when trying to access the property from the generated class (it wouldn't be there).  Additionally, there are other options as noted here. The first step was to create the .tt file.  Note that this is a basic example, it could be extended even further I'm sure.  In this example I just manually input the path to the web.config file. <#@ template debug="false" hostspecific="true" language="C#" #><#@ output extension=".cs" #><#@ assembly Name="System.Configuration" #><#@ assembly name="System.Xml" #><#@ assembly name="System.Xml.Linq" #><#@ assembly name="System.Net" #><#@ assembly name="System" #><#@ import namespace="System.Configuration" #><#@ import namespace="System.Xml" #><#@ import namespace="System.Net" #><#@ import namespace="Microsoft.VisualStudio.TextTemplating" #><#@ import namespace="System.Xml.Linq" #>using System;using System.Configuration;using System.Xml;using System.Xml.Linq;using System.Linq;namespace MyProject.Web { public partial class Configurator { <# var xDocument = XDocument.Load(@"G:\MySolution\MyProject\Web.config"); var results = xDocument.Descendants("appSettings"); const string key = "key"; const string name = "name"; foreach (var xElement in results.Descendants()) {#> public string <#= xElement.Attribute(key).Value#>{get {return ConfigurationManager.AppSettings[<#= string.Format("{0}{1}{2}","\"" , xElement.Attribute(key).Value, "\"")#>];}} <#}#> <# var connectionStrings = xDocument.Descendants("connectionStrings"); foreach(var connString in connectionStrings.Descendants()) {#> public string <#= connString.Attribute(name).Value#>{get {return ConfigurationManager.ConnectionStrings[<#= string.Format("{0}{1}{2}","\"" , connString.Attribute(name).Value, "\"")#>].ConnectionString;}} <#} #> }} The resulting .cs file: using System;using System.Configuration;using System.Xml;using System.Xml.Linq;using System.Linq;namespace MyProject.Web { public partial class Configurator { public string ClientValidationEnabled{get {return ConfigurationManager.AppSettings["ClientValidationEnabled"];}} public string UnobtrusiveJavaScriptEnabled{get {return ConfigurationManager.AppSettings["UnobtrusiveJavaScriptEnabled"];}} public string ServiceUri{get {return ConfigurationManager.AppSettings["ServiceUri"];}} public string TestConnection{get {return ConfigurationManager.ConnectionStrings["TestConnection"].ConnectionString;}} public string SecondTestConnection{get {return ConfigurationManager.ConnectionStrings["SecondTestConnection"].ConnectionString;}} }} Next, I extended the partial class for easy access to the Configuration. However, you could just use the generated class file itself. using System;using System.Linq;using System.Xml.Linq;namespace MyProject.Web{ public partial class Configurator { private static readonly Configurator Instance = new Configurator(); public static Configurator For { get { return Instance; } } }} Finally, in my example, I used the Configurator class like so: [TestMethod] public void Test_Web_Config() { var result = Configurator.For.ServiceUri; Assert.AreEqual(result, "http://localhost:30237/Service1/"); }

  Read the article

• Failed to install GRUB on a separate '/boot' partition on a fake RAID 0 (12.04LTS)

  - by gerben

  I'm having some problems getting GRUB configured for Ubuntu 12.04LTS on a fake RAID 0. I can either get the GRUB rescue prompt at startup, or just a GRUB prompt but I cannot boot to Ubuntu manually. How can I configure the GRUB to actually use the Ubuntu install? The steps taken: Installing Ubuntu on fake raid The Ubuntu installer cannot install Ubuntu on the drive. After defining the partitions to use it fails with "Error: ???", pressing OK terminates the installer. Therefore, I used GParted to configure the partitions: /dev/mapper/sil_agadaccfacbg : (the RAID configuration, created partition): /dev/mapper/sil_agadaccfacbg1:ext2, 200MiB, (with 'boot' flag) /dev/mapper/sil_agadaccfacbg3:ext2, 67.75GiB, (which will contain Ubuntu) /dev/mapper/sil_agadaccfacbg2:extended, 1.00GiB, (for swap) Contains: /dev/mapper/sil_agadaccfacbg5: unknown Because of the fake-RAID, I already mounted the destination partitions before running the Ubuntu installer: > mkdir /mnt/boot > sudo mount /dev/mapper/sil_agadaccfacbg1 /mnt/boot > mkdir /mnt/ubuntu > sudo mount /dev/mapper/sil_agadaccfacbg3 /mnt/ubuntu In the installer I chose the following partition usage: /dev/mapper/sil_agadaccfacbg1 ext2, mount at /boot (209MB) /dev/mapper/sil_agadaccfacbg3 ext2, mount at / (72751MB) /dev/mapper/sil_agadaccfacbg5 swap Device for boot loader installation: /dev/mapper/sil_agadaccfacbg, linux device-mapper (striped) (74.0GB) This will install Ubuntu, but will fail to install GRUB (it seems to use /dev/sda no matter which one I choose) Installing GRUB with dpkg-reconfigure I followed this guide, but adapted it for two partitions: sudo mount /dev/mapper/sil_agadaccfacbg3 /mnt/ubuntu sudo mount --bind /dev /mnt/ubuntu/dev sudo mount --bind /proc /mnt/ubuntu/proc sudo mount --bind /sys /mnt/ubuntu/sys sudo mount /dev/mapper/sil_agadaccfacbg1 /mnt/boot sudo mount --bind /boot /mnt/boot sudo chroot /mnt/ubuntu dpkg-reconfigure grub-pc However, it does not ask where to install GRUB (I should choose /dev/mapper/sil_agadaccfacbg somewhere..) After reboot I get the GRUB rescue prompt with message no such device Installing GRUB with grub-install After the same mount commands as above, I continued with: > sudo grub-install --root-directory=/mnt/boot /dev/mapper/sil_agadaccfacbg This gives the following message: /usr/sbin/grub-probe: error: cannot find a device for /mnt/boot/boot/grub (is /dev mounted?) It does succeed when mounting just the boot partition : sudo mount /dev/mapper/sil_agadaccfacbg1 /mnt sudo grub-install --root-directory=/mnt/ /dev/mapper/sil_agadaccfacbg This finishes with: Installation finished. No error reported. After reboot I get the GRUB console, with welcome text. Attempting to manually start Ubuntu: ls (hd0) (hd0,msdos3) : (Ubuntu install partition) (hd0,msdos1) : (Ubuntu boot partition) (hd1) (hd1,msdos1) : (Ubuntu live USB) ls (hd0,msdos3)/ contains: - vmlinuz - lib/ - tmp/ - initrd.img - mnt/ - var/ - proc/ - boot/ - root/ - etc/ - run/ - media/ - sbin/ - bin/ - selinux/ - dev/ - srv/ - home/ - sys/ ls (hd0,msdos1)/ contains: -grub/ -boot/ -initrd.img-3.8.0-29-generic -vmlinuz-3.8.0.29-generic -config-3.8 linux (hd0,msdos3)/vmlinuz This returns "error: out of disk" Installing GRUB on Ubuntu partition with grub-install > sudo mount /dev/mapper/sil_agadaccfacbg3 /mnt > sudo grub-install --root-directory=/mnt/ /dev/mapper/sil_agadaccfacbg This finishes with message: > Installation finished. No error reported. After reboot get the message "error: out of disk" and the GRUB rescue prompt. Configuring GRUB with grub-mkconfig Attempting to run grub-mkconfig with different destinations results in the same message: /usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?). Remarks: Initially I didn't use a separate /boot partition, but the GRUB install then also failed. Because some mention that a small partition at the beginning of the drive is necessary on old machines, I retried with a /boot partition This is a single boot (no other OS's installed/used)

  Read the article

• dynamic? I'll never use that ... or then again, maybe it could ...

  - by adweigert

  So, I don't know about you, but I was highly skeptical of the dynamic keywork when it was announced. I thought to myself, oh great, just another move towards VB compliance. Well after seeing it being used in things like DynamicXml (which I use for this example) I then was working with a MVC controller and wanted to move some things like operation timeout of an action to a configuration file. Thinking big picture, it'd be really nice to have configuration for all my controllers like that. Ugh, I don't want to have to create all those ConfigurationElement objects... So, I started thinking self, use what you know and do something cool ... Well after a bit of zoning out, self came up with use a dynamic object duh! I was thinking of a config like this ...<controllers> <add type="MyApp.Web.Areas.ComputerManagement.Controllers.MyController, MyApp.Web"> <detail timeout="00:00:30" /> </add> </controllers> So, I ended up with a couple configuration classes like this ...blic abstract class DynamicConfigurationElement : ConfigurationElement { protected DynamicConfigurationElement() { this.DynamicObject = new DynamicConfiguration(); } public DynamicConfiguration DynamicObject { get; private set; } protected override bool OnDeserializeUnrecognizedAttribute(string name, string value) { this.DynamicObject.Add(name, value); return true; } protected override bool OnDeserializeUnrecognizedElement(string elementName, XmlReader reader) { this.DynamicObject.Add(elementName, new DynamicXml((XElement)XElement.ReadFrom(reader))); return true; } } public class ControllerConfigurationElement : DynamicConfigurationElement { [ConfigurationProperty("type", Options = ConfigurationPropertyOptions.IsRequired | ConfigurationPropertyOptions.IsKey)] public string TypeName { get { return (string)this["type"]; } } public Type Type { get { return Type.GetType(this.TypeName, true); } } } public class ControllerConfigurationElementCollection : ConfigurationElementCollection { protected override ConfigurationElement CreateNewElement() { return new ControllerConfigurationElement(); } protected override object GetElementKey(ConfigurationElement element) { return ((ControllerConfigurationElement)element).Type; } } And then had to create the meat of the DynamicConfiguration class which looks like this ...public class DynamicConfiguration : DynamicObject { private Dictionary<string, object> properties = new Dictionary<string, object>(StringComparer.CurrentCultureIgnoreCase); internal void Add<T>(string name, T value) { this.properties.Add(name, value); } public override bool TryGetMember(GetMemberBinder binder, out object result) { var propertyName = binder.Name; result = null; if (this.properties.ContainsKey(propertyName)) { result = this.properties[propertyName]; } return true; } } So all being said, I made a base controller class like a good little MVC-itizen ...public abstract class BaseController : Controller { protected BaseController() : base() { var configuration = ManagementConfigurationSection.GetInstance(); var controllerConfiguration = configuration.Controllers.ForType(this.GetType()); if (controllerConfiguration != null) { this.Configuration = controllerConfiguration.DynamicObject; } } public dynamic Configuration { get; private set; } } And used it like this ...public class MyController : BaseController { static readonly string DefaultDetailTimeout = TimeSpan.MaxValue.ToString(); public MyController() { this.DetailTimeout = TimeSpan.Parse(this.Configuration.Detail.Timeout ?? DefaultDetailTimeout); } public TimeSpan DetailTimeout { get; private set; } } And there I have an actual use for the dynamic keyword ... never thoguht I'd see the day when I first heard of it as I don't do much COM work ... oh dont' forget this little helper extension methods to find the controller configuration by the controller type.public static ControllerConfigurationElement ForType<T>(this ControllerConfigurationElementCollection collection) { Contract.Requires(collection != null); return ForType(collection, typeof(T)); } public static ControllerConfigurationElement ForType(this ControllerConfigurationElementCollection collection, Type type) { Contract.Requires(collection != null); Contract.Requires(type != null); return collection.Cast<ControllerConfigurationElement>().Where(element => element.Type == type).SingleOrDefault(); } Sure, it isn't perfect and I'm sure I can tweak it over time, but I thought it was a pretty cool way to take advantage of the dynamic keyword functionality. Just remember, it only validates you did it right at runtime, which isn't that bad ... is it? And yes, I did make it case-insensitive so my code didn't have to look like my XML objects, tweak it to your liking if you dare to use this creation.

  Read the article

• What DX level does my graphics card support? Does it go to 11?

  - by Daniel Moth

  Recently I run into a situation that I have run into quite a few times. Someone encounters a machine and the question arises: "Is there a DirectX 11 card in this machine?". Typically the reason you are interested in that is because cards with DirectX 11 drivers fully support DirectCompute (and by extension C++ AMP) for GPGPU programming. The driver specifically is WDDM (1.1 on Windows 7 and Windows 8 introduces WDDM 1.2 with cool new capabilities). There are many ways for figuring out if you have a DirectX11 card, so here are the approaches that you can use, with a bonus right at the end of the post. Run DxDiag WindowsKey + R, type DxDiag and hit Enter. That is the DirectX diagnostic tool, which unfortunately, only tells you on the "System" tab what is the highest version of DirectX installed on your machine. So if it reports DirectX 11, that doesn't mean you have a DX11 driver! The "Display" tab has a promising "DDI version" label, but unfortunately that doesn't seem to be accurate on the machines I've tested it with (or I may be misinterpreting its use). Either way, this tool is not the one you want for this purpose, although it is good for telling you the WDDM version among other things. Use the Microsoft hardware page There is a Microsoft Windows 7 compatibility center, that lists all hardware (tip: use the advanced search) and you could try and locate your device there… good luck. Use Wikipedia or the hardware vendor's website Use the Wikipedia page for the vendor cards, for both nvidia and amd. Often this information will also be in the specifications for the cards on the IHV site, but is is nice that wikipedia has a single page per vendor that you can search etc. There is a column in the tables for API support where you can see the DirectX version. Check if it is one of these recommended DX11 cards You may not have a DirectX 11 card and are interested in purchasing one. While I am in no position to make recommendations, I will list here some cards from two big IHVs that we know are DirectX 11 capable. Some AMD (aka ATI) cards Low end, inexpensive DX11 hardware: Radeon 5450, 5550, 6450, 6570 Mid range (decent perf, single precision): Radeon 5750, 5770, 6770, 6790 High end (capable of double precision): Radeon 5850, 5870, 6950, 6970 Single precision APUs: AMD E-Series APUs AMD A-Series APUs Some NVIDIA cards Low end, inexpensive DX11 hardware: GeForce GT430, GT 440, GT520, GTS 450 Quadro 400, 600 Mid-range (decent perf, single precision): GeForce GTX 460, GTX 550 Ti, GTX 560, GTX 560 Ti Quadro 2000 High end (capable of double precision): GeForce GTX 480, GTX 570, GTX 580, GTX 590, GTX 595 Quadro 4000, 5000, 6000 Tesla C2050, C2070, C2075 Get the DirectX SDK and run DirectX Caps Viewer Download and install the June 2010 DirectX SDK. As part of that you now have the DirectX Capabilities Viewer utility (find it in your start menu by searching for "DirectX Caps Viewer", the filename is DXCapsViewer.exe). It will list all your devices (emulated, and real hardware ones) under the first node. Expand the hardware entries and then expand again the Direct3D 11 folder. If you see D3D_FEATURE_LEVEL_11_ under that, then your card supports feature level 11 which means it supports DirectCompute and C++ AMP. In the following screenshot of one of my old laptops, the card only goes to feature level 10. Run a utility from the web that just tells you! Of course, writing some C++ AMP code that enumerates accelerators and lists the ones that are capable is trivial. However that requires that you have redistributed the runtime, so a more broadly applicable approach is to use the DX APIs directly to enumerate the DX11 capable cards. That is exactly what the development lead for C++ AMP has done and he describes and shares that utility at this post. Comments about this post by Daniel Moth welcome at the original blog.

  Read the article

• A story of Murphy&ndash;my technical issues at TechDays Switzerland #chtd

  - by Laurent Bugnion

  I had two sessions at the recent Swiss TechDays. While the first one (Advanced Development for Windows Phone 8) went extremely well (I think), I had a very annoying technical issue in the beginning of my second session. First let me add that I talked to Microsoft about that and I hope they will change a few things in the room assignment for next year. My two sessions were one right after the other, with only 15 minutes break to change room. I don’t mind having two sessions so close from each other, but I would really like them to be in the same room in order to avoid having to move my laptops (plural, that will become important later) and redoing the tech check. That being said, I am guilty of not checking where my talks would be before the day before the conference, and when I did notice, it was too late to change it. After my first session, I quickly moved to the other room and setup my main laptop, a Dell Precision. We tested the video output (VGA) and didn’t notice anything special. The projectors are using a fairly high resolution (kudos to the Basel conference center for not having old school 1024x768 projectors anymore, that makes Blend really hard to demo ;) but since everything went great during the first talk, I was not worried. In fact I even had some time to chat with some early attendees about my Microsoft Surface and the Samsung Slate 7, which I had carried with me in addition to the Precision. I just thought it would be nice to show the hardware that Windows 8 can run on, without thinking any further. When the session started, I immediately noticed that the main screen was not showing anything. I thought I had just forgotten to switch to “duplicate” for the video output, and did that with a quick Win-P. However it didn’t “hold”. After 2 seconds, it reverted back to a black display for my attendees. Then I started to really worry. We tried everything, switching from VGA to HDMI, changing the resolution, setting the projector as primary display, but nothing did the trick. The projector was just refusing to show my screen. Now, to show you how despaired I started to be, I even considered using the “extend” setting (which worked just fine), and to use one of the feedback monitors on the floor but really it was super cumbersome. Eventually, my last resort arrived: I started my Samsung Slate 7, which by chance has Visual Studio 12 and Blend 5 installed, plugged the HDMI projector in the dock (yes, I had the dock with me, which I usually don’t!), connected it to internet (had to enter a long password for that), loaded the source code from my main machine using a USB stick and…. finally started to give my presentation. All in all I think we lost about 10 minutes. Amongst the most horrible minutes of my whole life, truly (yes I am blessed, I didn’t have that many horrible minutes in my life ;) I really want to apologize to my attendees. We joked a bit during the attempts to resolve the issue, the reactions I had after the session were all very nice and sympathetic. Only a handful of people left my session while I was having the issues, and I really don’t blame them (who knew how long the problem would last!!). But still, I probably talked at more than 60 sessions over the years, and this was by far my most painful moment. What did I learn? So what did I learn from this? Well from now on I will always have my slate ready with the latest source code, internet connection and every tool I might need during the presentation. This way, if I detect even a hint that the Precision might not work, I will just switch to the Slate. The experience of presenting on the slate is actually not bad at all, it is just a bit slow for my taste, but it does work. By the way, I will be posting the code and slides for my sessions very soon, I just need to “clean it and zip it”. Stay tuned, and thanks again for your patience in that horrible circumstance. Cheers Laurent   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

  Read the article

• Simple Merging Of PDF Documents with iTextSharp 5.4.5.0

  - by Mladen Prajdic

  As we were working on our first SQL Saturday in Slovenia, we came to a point when we had to print out the so-called SpeedPASS's for attendees. This SpeedPASS file is a PDF and contains thier raffle, lunch and admission tickets. The problem is we have to download one PDF per attendee and print that out. And printing more than 10 docs at once is a pain. So I decided to make a little console app that would merge multiple PDF files into a single file that would be much easier to print. I used an open source PDF manipulation library called iTextSharp version 5.4.5.0 This is a console program I used. It’s brilliantly named MergeSpeedPASS. It only has two methods and is really short. Don't let the name fool you It can be used to merge any PDF files. The first parameter is the name of the target PDF file that will be created. The second parameter is the directory containing PDF files to be merged into a single file. using iTextSharp.text; using iTextSharp.text.pdf; using System; using System.IO; namespace MergeSpeedPASS { class Program { static void Main(string[] args) { if (args.Length == 0 || args[0] == "-h" || args[0] == "/h") { Console.WriteLine("Welcome to MergeSpeedPASS. Created by Mladen Prajdic. Uses iTextSharp 5.4.5.0."); Console.WriteLine("Tool to create a single SpeedPASS PDF from all downloaded generated PDFs."); Console.WriteLine(""); Console.WriteLine("Example: MergeSpeedPASS.exe targetFileName sourceDir"); Console.WriteLine(" targetFileName = name of the new merged PDF file. Must include .pdf extension."); Console.WriteLine(" sourceDir = path to the dir containing downloaded attendee SpeedPASS PDFs"); Console.WriteLine(""); Console.WriteLine(@"Example: MergeSpeedPASS.exe MergedSpeedPASS.pdf d:\Downloads\SQLSaturdaySpeedPASSFiles"); } else if (args.Length == 2) CreateMergedPDF(args[0], args[1]); Console.WriteLine(""); Console.WriteLine("Press any key to exit..."); Console.Read(); } static void CreateMergedPDF(string targetPDF, string sourceDir) { using (FileStream stream = new FileStream(targetPDF, FileMode.Create)) { Document pdfDoc = new Document(PageSize.A4); PdfCopy pdf = new PdfCopy(pdfDoc, stream); pdfDoc.Open(); var files = Directory.GetFiles(sourceDir); Console.WriteLine("Merging files count: " + files.Length); int i = 1; foreach (string file in files) { Console.WriteLine(i + ". Adding: " + file); pdf.AddDocument(new PdfReader(file)); i++; } if (pdfDoc != null) pdfDoc.Close(); Console.WriteLine("SpeedPASS PDF merge complete."); } } } } Hope it helps you and have fun.

  Read the article

• Custom Templates: Using user exits

  - by Anthony Shorten

  One of the features of Oracle Utilities Application Framework V4.1 is the ability to use templates and user exits to extend the base configuration files. The configuration files used by the product are based upon a set of templates shipped with the product. When the configureEnv utility asks for configuration settings they are stored in a configuration file ENVIRON.INI which outlines the environment settings. These settings are then used by the initialSetup utility to populate the various configuration files used by the product using templates located in the templates directory of the installation. Now, whilst the majority of the installations at any site are non-production and the templates provided are generally adequate for that need, there are circumstances where extension of templates are needed to take advantage of more advanced facilities (such as advanced security and environment settings). The issue then becomes that if you alter the configuration files manually (directly or indirectly) then you may lose all your custom settings the next time you run initialSetup. To counter this we allow customers to either override templates with their own template or we now provide user exits in the templates to add fragments of configuration unique to that part of the configuration file. The latter means that the base template is still used but additions are included to provide the extensions. The provision of custom templates is supported but as soon as you use a custom template you are then responsible for reflecting any changes we put in the base template over time. Not a big task but annoying if you have to do it for multiple copies of the product. I prefer to use user exits as they seem to represent the least effort solution. The way to find the user exits available is to either read the Server Administration Guide that comes with your product or look at individual templates and look for the lines: #ouaf_user_exit <user exit name> Where <user exit name> is the name of the user exit. User exits are not always present but are in places that we feel are the most likely to be changed. If a user exit does not exist the you can always use a custom template instead. Now lets show an example. By default, the product generates a config.xml file to be used with Oracle WebLogic. This configuration file has the basic setting contained in it to manage the product. If you want to take advantage of the Oracle WebLogic advanced settings, you can use the console to make those changes and it will be reflected in the config.xml automatically. To retain those changes across invocations of initialSetup, you need to alter the template that generates the config.xml or use user exits. The technique is this. Make the change in the console and when you save the change, WebLogic will reflect it in the config.xml for you. Compare the old version and new version of the config.xml and determine what to add and then find the user exit to put it in by examining the base template. For example, by default, the console is not automatically deployed (it is deployed on demand) in the base config.xml. To make the console deploy, you can add the following line to the templates/CM_config.xml.win.exit_3.include file (for windows) or templates/CM_config.xml.exit_3.include file (for linux/unix): <internal-apps-deploy-on-demand-enabled>false</internal-apps-deploy-on-demand-enabled> Now run initialSetup to reflect the change and if you check the splapp/config/config.xml file you will see the change applied for you. Now how did I know which include file? I check the template for config.xml and found there was an user exit at the right place. I prefixed my include filename with "CM_" to denote it as a custom user exit. This will tell the upgrade tools to leave that file alone whenever you decide to upgrade (or even apply fixes). User exits can be powerful and allow customizations to be added for advanced configuration. You will see products using Oracle Utilities Application Framework use this exits themselves (usually prefixed with the product code). You are also taking advantage of them.

  Read the article

• Ti Launchpad

  - by raysmithequip

  Just thought I would get a couple of notes up here for reference to anyone that is interested...it is now Feb 2011 and I have not been posting here enough to remember this blog. Back in Nov 2010 I ordered the Ti launchpad msp430, it is a little target board kit replete with a mini USB cable, two very inexpensive programmable mcu's and a couple of pin headers with a couple of led's on board, a spi connector some on board jumpers and two programmable micro switches....all for less than $5.00...INCLUDING SHIPPING!!....not bad when the ardruino's are running around 20.00 for the target board, atmega328 and cable off of eBay...I wont even mention the microchip pic right now.  Naw, for $5.00 the Ti launchpad kit is about the cheapest fun around...if-uns your a geek that is... Well, the launchpad was backordered for almost two months, came like Xmas eve in fact...I had almost forgotten it!! And really, it was way late and not my idea of an Xmas present for myself.  That would of been the web expressions 4 I bought a few weeks back.  With all the holidays, I did not even look at it till last week, in fact I passed the wrapped board around at my local ham club meeting during points of personal privilege....some oh's and ahhs but mostly duhs...I actually ordered it to avoid downloading the huge code compressor studio 4 (CCS) that was supposed to be included on the cd.  No cd.  I had already downloaded IAR  another programming IDE for these little micro bugs. In my spare time I toyed with IAR and the launchpad board but after about two days of playing delete the driver with windows I decided to just download CCS 4, the code limited version, and give that a shot......CCS 4, is a good rewrite from the earlier versions, it is based on Eclipse as an IDE and includes the drivers for the msp430 target board I received in the kit.  Once installed I quickly configured the debugger for the target chip which was already plugged into the dip socket at the factory, msp430G2131 from he drop down list and clicked ok...I was in!! The CCS4 is full of bells and whistles compared to the IAR, which I would of preferred for the simplicity.  But the code compressor studio really does have it all!!..the code limited version is free, and of all things will give you java script editor box.  The whole layout in debugger mode reminds me of any modern programmer IDE...I mean sure give me Tex anytime but you simply must admire all the boxes and options included in the GUI.  It was a simple matter to check the assembly code in the flash and ram memory that came preloaded for the launchpad kit.  Assembly.  I am right now looking for my old assembly textbooks...sure I remember how to use mov and add etc but a couple of the commands are a little more than vague anymore.  Still, these little mcu's are about 50 cents each and might just work in a couple of projects I have lined up for the near future.  I may document the code here.  Luckily, I plan to write the code in c++ for the main project but if it has to be assembly, no prob.  For reference, the program that came already on the 2131 in the kit was a temperature indicator that alternately flashed red and green leds and changed the intensity of either depending on whether the temp was rising or falling...neat.  Neat enough that it might be worthwhile banging out a little GUI in windows 7 to test the new user device system calls, maybe put a temp gauge widget up on the desktop...just to keep from getting bored.  If you see some assembly code on this blog, you know I was doing something with one of the many mcu's out there.....thats all for now, more to follow...a bit later, of course.

  Read the article

• How to Convert Videos to 3GP for Mobile Phones

  - by DigitalGeekery

  Would you like to play videos on your phone, but the device only supports 3GP files? We’ll show you how to convert popular video files into 3GP mobile phone video format with Pazera Free Video to 3GP Converter. Download the Pazera Free Video to 3GP Converter (Download link below). It will allow you to convert popular video files (AVI, MPEG, MP4, FLV, MKV, and MOV) to work on your mobile phone. There is no installation to run. You’ll just need to unzip the download folder and double-click the videoto3gp.exe file to run the application. To add video files to the queue, click on the Add files button. Browse for your file, and click Open.   Your video will be added to the Queue. You can add multiple files to the queue and convert them all at one time. The converter comes with several pre-configured profiles for conversion settings. To load a profile, select one from the Profile drop down list and then click the Load button. The settings in the panels at the bottom of the application will be automatically updated.   If you are a more advanced user, the options on the lower panels allow for adjusting settings to your liking. You can choose between 3GP and 3G2 (for some older phones), H.263, MPEG-4, and XviD video codecs, AAC or AMR-NB audio codecs, as well as a variety of bitrates, resolutions, etc.  By default, the converted file will be output to the same location as the input directory. You can change it by clicking the text box input radio button and browsing for a different folder. Click Convert to start the conversion process. A conversion output box will open and display the progress. When finished, click Close.   Now you’re ready to load the video onto your phone and enjoy.     Conclusion Pazera Free Video to 3GP Converter is not exactly the ultimate video conversion tool, but it is quick and simple enough for the average user to convert most video formats to 3GP. Plus, it’s portable. You can copy the folder to a USB drive and take it with you. Do you have some 3GP video files you’d like to convert to more common formats? Check out our earlier article on how to convert 3GP to AVI and MPEG for free. Link Download Pazera Free Video to 3GP Converter Similar Articles Productive Geek Tips Convert .3GP and .3G2 Files to AVI / MPEG for FreeExtract Audio from a Video File with Pazera Free Audio ExtractorConvert PDF Files to Word Documents and Other FormatsConvert YouTube Videos to MP3 with YouTube DownloaderFriday Fun: Watch HD Video Content with Meevid TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Daily Motivator (Firefox) FetchMp3 Can Download Videos & Convert Them to Mp3 Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation"

  Read the article

• The Raspberry Pi JavaFX In-Car System (Part 3)

  - by speakjava

  Ras Pi car pt3 Having established communication between a laptop and the ELM327 it's now time to bring in the Raspberry Pi. One of the nice things about the Raspberry Pi is the simplicity of it's power supply.  All we need is 5V at about 700mA, which in a car is as simple as using a USB cigarette lighter adapter (which is handily rated at 1A).  My car has two cigarette lighter sockets (despite being specified with the non-smoking package and therefore no actual cigarette lighter): one in the centre console and one in the rear load area.  This was convenient as my idea is to mount the Raspberry Pi in the back to minimise the disruption to the very clean design of the Audi interior. The first task was to get the Raspberry Pi to communicate using Wi-Fi with the ELM 327.  Initially I tried a cheap Wi-Fi dongle from Amazon, but I could not get this working with my home Wi-Fi network since it just would not handle the WPA security no matter what I did.  I upgraded to a Wi Pi from Farnell and this works very well. The ELM327 uses Ad-Hoc networking, which is point to point communication.  Rather than using a wireless router each connecting device has its own assigned IP address (which needs to be on the same subnet) and uses the same ESSID.  The settings of the ELM327 are fixed to an IP address of 192.168.0.10 and useing the ESSID, "Wifi327".  To configure Raspbian Linux to use these settings we need to modify the /etc/network/interfaces file.  After some searching of the web and a few false starts here's the settings I came up with: auto lo eth0 wlan0 iface lo inet loopback iface eth0 inet static     address 10.0.0.13     gateway 10.0.0.254     netmask 255.255.255.0 iface wlan0 inet static     address 192.168.0.1     netmask 255.255.255.0     wireless-essid Wifi327     wireless-mode ad-ho0 After rebooting, iwconfig wlan0 reported that the Wi-Fi settings were correct.  However, ifconfig showed no assigned IP address.  If I configured the IP address manually using ifconfig wlan0 192.168.0.1 netmask 255.255.255.0 then everything was fine and I was able to happily ping the IP address of the ELM327.  I tried numerous variations on the interfaces file, but nothing I did would get me an IP address on wlan0 when the machine booted.  Eventually I decided that this was a pointless thing to spend more time on and so I put a script in /etc/init.d and registered it with update-rc.d.  All the script does (currently) is execute the ifconfig line and now, having installed the telnet package I am able to telnet to the ELM327 via the Raspberry Pi.  Not nice, but it works. Here's a picture of the Raspberry Pi in the car for testing In the next part we'll look at running the Java code on the Raspberry Pi to collect data from the car systems.

  Read the article

• Silverlight Cream for January 15, 2011 -- #1028

  - by Dave Campbell

  Note to #1024 Swag Winners: I'm sending emails to the vendors Sunday night, thanks for your patience (a few of you have not contacted me yet) In this Issue: Ezequiel Jadib, Daniel Egan(-2-), Page Brooks, Jason Zander, Andrej Tozon, Marlon Grech, Jonathan van de Veen, Walt Ritscher, Jesse Liberty, Jeremy Likness, Sacha Barber, William E. Burrows, and WindowsPhoneGeek. Above the Fold: Silverlight: "Building a Radar Control in Silverlight - Part 1" Page Brooks WP7: "Tutorial: Dynamic Tile Push Notification for Windows Phone 7" Jason Zander Training: "WP7 Unleashed Session I–Hands on Labs" Daniel Egan From SilverlightCream.com: Silverlight Rough Cut Editor SP1 Released Ezequiel Jadib has an announcement about the Rough Cut Editor SP1 release, and he walks you through the content, installation and a bit of the initial use. WP7 Unleashed Session I–Hands on Labs Daniel Egan posted Part 1 of 3 of a new WP7 HOL ... video online and material to download... get 'em while they're hot! WP7 Saving to Media Library Daniel Egan has another post up as well on saving an image to the media library... not the update from Tim Heuer... all good info Building a Radar Control in Silverlight - Part 1 This freakin' cool post from Page Brooks is the first one of a series on building a 'Radar Control' in Silverlight ... seriously, go to the bottom and run the demo... I pretty much guarantee you'll take the next link which is download the code... don't forget to read the article too! Tutorial: Dynamic Tile Push Notification for Windows Phone 7 Jason Zander has a nice-looking tutorial up on dynamic tile notifications... good diagrams and discussion and plenty of code. Reactive.buffering.from event. Andrej Tozon is continuing his Reactive Extensions posts with this one on buffering: BufferWithTime and BufferWIthCount ... good stuff, good write-up, and the start of a WP7 game? MEFedMVVM with PRISM 4 Marlon Grech combines his MEFedMVVM with Prism 4, and says it was easy... check out the post and the code. Adventures while building a Silverlight Enterprise application part #40 Jonathan van de Veen has a discussion up about things you need to pay attention to as your project gets close to first deployment... lots of good information to think about Silverlight or not. Customize Windows 7 Preview pane for XAML files Walt Ritscher has a (very easy) XAML extension for Windows 7 that allows previewing of XAML files in an explorer window... as our UK friends say "Brilliant!" Entity Framework Code-First, oData & Windows Phone Client From the never-ending stream of posts that is Jesse Liberty comes this one on EF Code-First... so Jesse's describing Code-First and OData all wrapped up about a WP7 app Sterling Silverlight and Windows Phone 7 Database Triggers and Auto-Identity Sterling and Database Triggers sitting in a tree... woot for WP7 from Jeremy Likness... provides database solutions including Validation, Data-specific concerns such as 'last modified', and post-save processing ... all good, Jeremy! A Look At Fluent APIs Sacha Barber has a great post up that isn't necessarily Silverlight, but is it? ... we've been hearing a lot about Fluent APIs... read on to see what the buzz is. Windows Phone 7 - Part 3 - Final Application William E. Burrows has Part 3 of his WP7 tutorial series up... this one completing the Golf Handicap app by giving the user the ability to manage scores. User Control vs Custom Control in Silverlight for WP7 WindowsPhoneGeek has a great diagram and description-filled post up on User Controls and Custom Controls in WP7... good external links too. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Migrating a WebLogic Domain from a 32 to a 64 bit JVM/Architecture

  - by adejuanc

  Currently on 32 bit OS which presents a physical constraint when trying to allocate memory. By limit, a 32 bit OS, will not be able to allocate more than 3 GB on a Linux environment, or 2 GB for Windows environment (not considering Physical Address Extension (PAE) implementation, which can increase the maximum allocatable memory). When this limit is reached, a migration to a 64 bit architecture is recommended. Below are the steps on how to install a 64 WebLogic Server version, along with a 64 Bit JVM and then how to migrate the domain to this new environment. Weblogic Server Version: WebLogic Server Version: 10.3.4.0 OS: Linux adejuan-cl.cl.oracle.com 2.6.18-194.el5 #1 SMP Mon Jan 01 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux JVM:java version "1.6.0_22" Java(TM) SE Runtime Environment (build 1.6.0_22-b04) Oracle JRockit(R) (build R28.1.1-13-139783-1.6.0_22-20101206-0136-linux-x86_64, compiled mode) To create migration template: 1. Execute $<WLS_HOME>/wlserver_10.3/common/bin/config_builder.sh 2. Create Domain Template. 3. Select Domain to migrate. 4. Enter the name of template and other info. Click next. 5. Using Add Button, Select libraries you want to add under lib folder. copy jdbc data sources you would like to have under config/jdbc folder. If you want to have log4j configuration, copy log4j.xml under domain_root folder. 6. Select data base for the domain and click next. 7. Enter Admin Server Name and port numbers. Click next. 8. Enter username and password. Click next. Select No if you don want to add users/groups/roles 9. Click next until reach button create. This will create a jar file that is needed for the next action plan. To install and migrate domain to 64 bit architecture. 1. Install JVM Jrockit R28.1.1.13 on environment. (uncompress zip folder on a known location) 2. Go to JRockit_Home/bin and execute $ java -d64 -jar wls1034_generic.jar 3. When prompt, select JRockit JVM in browse menu, and wait for installation to finish. 4. Go to <WLS_HOME>/wlserver_10.3/common/bin and execute $ ./config.sh 5. Select Create a new Weblogic domain 6. Select Base this domain on an existing template and select browse. 7. Select jar file created on previous action plan. 8. Select Name of domain. Maintain in most cases. 9. Select user name and password. Maintain in most cases. 10. Select Jrockit SDK 1.6.0_22 and click next. 11. Confirm all JMS/JDBC/security configuration. 12. On select Optional Configuration, reconfigure if necessary. 13. Check on Configuration summary for all domain configuration. 14. Click on create, to finish up domain import. Note: Always when installing a 64 bit WLS, it's necessary to install first the 64 JVM and then run the generic installer with the -d64 bit option. If this is not performed, the installation will be the 32 default version. For more information, please refer: http://download.oracle.com/docs/cd/E13188_01/jrockit/docs50/dev_faq.html#pae

  Read the article

• Additional new material WebLogic Community

  - by JuergenKress

  Virtual Developer Conference On Demand - Register Updated Book: WebLogic 12c: Distinctive Recipes - Architecture, Development, Administration by Oracle ACE Director Frank Munz - Blog | YouTube Webcast: Migrating from GlassFish to WebLogic - Replay Reliance Commercial Finance Accelerates Time-to-Market, Improves IT Staff Productivity by 70% - Blog | Oracle Magazine Retrieving WebLogic Server Name and Port in ADF Application by Andrejus Baranovskis, Oracle Ace Director - Blog Using Oracle WebLogic 12c with NetBeans IDEOracle ACE Director Markus Eisele walks you through installing and configuring all the necessary components, and helps you get started with a simple Hello World project. Read the article. Video: Oracle A-Team ADF Mobile Persistence SampleThis video by Oracle Fusion Middleware A-Team architect Steven Davelaar demonstrates how to use the ADF Mobile Persistence Sample JDeveloper extension to generate a fully functional ADF Mobile application that reads and writes data using an ADF BC SOAP web service. Watch the video. Java ME 8 ReleaseDownload Java ME today! This release is an implementation of the Java ME 8 standards JSR 360 (CLDC 8) and JSR 361 (MEEP 8), and includes support of alignment with Java SE 8 language features and APIs, an enhanced services-enabled application platform, the ability to "right-size" the platform to address a wide range of target devices, and more. Learn more Download Java ME SDK 8It includes application development support for Oracle Java ME Embedded 8 platforms and includes plugins for NetBeans 8. See the Java ME 8 Developer Tools Documentation to learn JavaOne 2014 Early Bird RateRegister early to save $400 off the onsite price. With the release of Java 8 this year, we have exciting new sessions and an interactive demo space! NetBeans IDE 8.0 Patch UpdateThe NetBeans Team has released a patch for NetBeans IDE 8.0. Download it today to get fixes that enhance stability and performance. Java 8 Questions ForumFor any questions about this new release, please join the conversation on the Java 8 Questions Forum. Java ME 8: Getting Started with Samples and Demo CodeLearn in few steps how to get started with Java ME 8! The New Java SE 8 FeaturesJava SE 8 introduces enhancements such as lambda expressions that enable you to write more concise yet readable code, better utilize multicore systems, and detect more errors at compile time. See What's New in JDK 8 and the new Java SE 8 documentation portal. Pay Less for Java-Related Books!Save 20% on all new Oracle Press books related to Java. Download the free preview sampler for the Java 8 book written by Herbert Schildt, Maurice Naftain, Henrik Ebbers and J.F. DiMarzio. New book: EJB 3 in Action, Second Edition WebLogic 12c Does WebSockets Getting Started by C2B2 Video: Building Robots with Java Embedded Video: Nighthacking TV Watch presentations by Stephen Chin and community members about Java SE, Java Embedded, Java EE, Hadoop, Robots and more. Migrating the Spring Pet Clinic to Java EE 7 Trip report : Jozi JUG Java Day in Johannesburg How to Build GlassFish 4 from Source 4,000 posts later : The Aquarium WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

  Read the article

• RewriteRule not working for certain URLs

  - by keiki

  There are a few domains pointing towards the same server, and of course I need them all redirect to only one of them. Redirects work, but only for certain URLs. What works: http://www.domain.com, http://domain.com, domain.com/index.html, domain.com/index.php, , domain.com/nonExistentDirectory, and if I click in the menu the following URLs are also redirected correctly: domain.com/foo/bar, domain.com/foo/bar.html or .php or other extension. What doesn't work: domain.com/existentDirectory, domain.com/foo/bar (if I type the URL in the address bar). If anyone will have the time and skill and will to tell me where's the mistake, I'll be deeply grateful. Here's my .htaccess file: AddHandler x-httpd-php .html .htm <ifModule mod_gzip.c> mod_gzip_on Yes mod_gzip_dechunk Yes mod_gzip_item_include file \.(html?|txt|css|js|php|pl)$ mod_gzip_item_include handler ^cgi-script$ mod_gzip_item_include mime ^text/.* mod_gzip_item_include mime ^application/x-javascript.* mod_gzip_item_exclude mime ^image/.* mod_gzip_item_exclude rspheader ^Content-Encoding:.*gzip.* </ifModule> <ifModule mod_expires.c> ExpiresActive On ExpiresDefault "access plus 1 seconds" ExpiresByType text/html "access plus 1 seconds" ExpiresByType image/gif "access plus 2592000 seconds" ExpiresByType image/jpeg "access plus 2592000 seconds" ExpiresByType image/png "access plus 2592000 seconds" ExpiresByType text/css "access plus 2592000 seconds" ExpiresByType text/javascript "access plus 216000 seconds" ExpiresByType application/x-javascript "access plus 216000 seconds" </ifModule> <ifModule mod_headers.c> <filesMatch "\\.(ico|pdf|flv|jpg|jpeg|png|gif|swf)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> <filesMatch "\\.(css)$"> Header set Cache-Control "max-age=2592000, public" </filesMatch> <filesMatch "\\.(js)$"> Header set Cache-Control "max-age=216000, private" </filesMatch> <filesMatch "\\.(xml|txt)$"> Header set Cache-Control "max-age=216000, public, must-revalidate" </filesMatch> <filesMatch "\\.(html|htm|php)$"> Header set Cache-Control "max-age=1, private, must-revalidate" </filesMatch> </ifModule> <ifModule mod_headers.c> Header unset ETag </ifModule> FileETag None <ifModule mod_headers.c> Header unset Last-Modified </ifModule> # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress RewriteCond %{HTTP_HOST} ^foo\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo1\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo1\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo2\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo2\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo3\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo3\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] RewriteCond %{HTTP_HOST} ^foo8\.com$ [OR] RewriteCond %{HTTP_HOST} ^www\.foo8\.com$ RewriteRule (.*) http://domain.com/$1 [R=301,L,QSA] Thinking that the above version was overkill, I've also tried to redirect all the requests for domains different than the main on to be redirected to it like this: RewriteCond %{HTTP_HOST} !^domain\.com$ [NC] RewriteRule ^(.*)$ http://domain.com [L,R=301] Is it also wrong? Because it doesn't work either! P.S. @Sodved I've tried that and it doesn't help (I comment here because I can't seem to be able to comment your answer.) Removing the following piece of code didn't solve the issue either, so the problem must be somewhere else: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress New details: using this tool for checking the redirects I got the following results for the URLs that are not redirected: Checked link: http://domain.com/aDirectory/ Type of link: direct link (note the trailing slash above) and: Checked link: http://domain.com/aDirectory Type of redirect: 301 Moved Permanently Redirected to: http://domain.com/aDirectory/ (no trailing slash here) I hope/suspect I'm getting closer to the cause of this behavior.

  Read the article

< Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >