Search Results

Search found 22277 results on 892 pages for 'multiple addresses'.

Page 412/892 | < Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >

• How can I share a printer and files on a Windows network over wifi

  - by Jacques

  What is the easiest way to create this setup: WiFi internet router separate in one room. Study room: Laptop with USB printer connected with wifi. My room: Laptop connected with wifi. I want to be able to print from the "My room" laptop to the "Study room" printer, and also share files between them. What is the easiest way to do this? Note, the wireless router needs to be in a separate room for both laptops to be able to connect to it. I've tried configuring homegroups and stuff to do with IP addresses that I found on the internet but have had no success. I'm not an expert with PC's but I've tried hard so there is probably just some trick to do it. If someone can help that will be great.

  Read the article

• How to legitimately work around ISP rate limits

  - by Derek Ting

  A lot of ISP rate limit the amount of e-mails that is sent from a particular IP address. What is the proper way to get around that rate limit? Our company has an iPhone application that sends many e-mails because of our large user base and many e-mails go to different ISPs that rate limit the number of messages coming from a specific IP. We do not send spam and we are a legitimate business. However, is there a better way to resolve this limitation rather than just getting a ton of IP addresses? Ideally, I wouldn't want to rely on a third party service to send mail. However, if its the only possible solution, we would consider.

  Read the article

• IPs on home network

  - by windchime

  I have a Linksys router and a Belkin wireless router at home. The Linksys router is connected to cable modem and two computers, as well as to the Belkin wireless router. A 3rd computer is connected to the Belkin router through Wifi. The IP addresses of the computers connected to Linksys are 192.168.1.101 and 192.168.1.102. The IP address of the Linksys router on LAN is 192.168.1.1. The IP address of the Belkin wireless router is 192.168.2.1(based on the 3rd computer's routing table) and the IP address of the 3rd computer is 192.168.2.5. If I ping 192.168.1.101 from 192.168.2.5, all are well. However, if I ping 192.168.2.5 from 192.168.1.101, Destination Host Unreachable. Why?

  Read the article

• MS Word 2007 Mail Merge fails on ZIP codes with leading Zeros (eg. 01234)

  - by Pretzel

  I have an Excel Spreadsheet with a ZIP code column. For some dumb reason the original spreadsheet I got had all the zip codes stored as numbers, so a ZIP code like 01234 was stored as 1234. Easy to fix with "Format Column" as "Special = ZIP Code". All values like 1234, show up as 01234. Great! When I import it into Word via Mail Merge (to print address labels), the ZIP codes on all the addresses starting with a leading zero (like 01234) revert to their old form (1234). How do I fix this?

  Read the article

• Source Control - XCode - Visual Studio 2005/2008 / 2010

  - by Mick Walker

  My apologies if this has been asked before, I wasnt quite sure if this question should be asked on a programming forum, as it more relates to programming environment than a particular technology, so please accept my (double) appologies if I am posting this in the wrong place, my logic in this case was if it effects the code I write, then this is the place for it. At home, I do a lot of my development on a Mac Pro, I do development for the Mac, iPhone and Windows on this machine (Xcode & Visual Studio - (multiple versions installed in bootcamp, but generally I run it via Parallels)). When visiting a client, I have a similar setup, but on my MacBook Pro. What I want is a source control solution to install on the Mac Pro, that will support both XCode and multiple versions of visual studio, so that when I visit a client, I can simply grab the latest copy from source control via the MacBook Pro. Whilst visiting the client, he / she may suggest changes, and minor ones I would tend to make on site, so I need the ability to merge any modified code back into the trunk of the project / solution when I return home. At the moment, I am using no source control at all, and rely on simply coping folders and overwriting them when I return from a client- thats my 'merge'!!! I was wondering if anyone had any ideas of a source provider I could use, which would support both Windows and Mac development environments, and is cheap (free would be better).

  Read the article

• Dynamic where clause using Linq to SQL in a join query in a MVC application

  - by jhoefnagels

  Dear .Net Linq experts, I am looking for a way to query for products in a catalog using filters on properties which have been assigned to the product based on the category to which the product belongs. So I have the following entities involved: Products -Id -CategoryId Categories [Id] Properties [Id, CategoryId] PropertyValues [Id, PropertyId] ProductProperties [ProductId, PropertyValueId] When I ad a product to the catalog, multiple ProductProperties will be added based on the category and I would like to be able to filter all products from a category by selecting values for one or more properties. I will gather all filters, which I will hold in a list, by reading the URL. Now it is time to actually get the products based on multiple properties and I have been trying to find the right strategy but untill now it does not really work. Is there a way to make this work without writing SQL? I was trying something like this: productsInCategory = ProductRepository.Where(p => p.Category.Name == category); foreach (PropertyFilter pf in filterList) { productsInCategory = (from product in productsInCategory join pp in ProductPropertyRepository on product.Id equals pp.ProductId where pp.PropertyValueId == pf.ValueId select product); }

  Read the article

• cassandra node discovery

  - by eQuiNoX__

  I just set up a 3 node system with ip addresses "192.168.0.101", "192.168.0.102", "192.168.0.103". I have set the seeds value on the configuration of all three machines as seeds: "192.168.0.101,192.168.0.102,192.168.0.103" However, on running nodetool on any of them, only the 103 machine gets discovered. node101:/opt/cassandra/apache-cassandra-0.8.5/bin# ./nodetool ring -h 192.168.0.101 Address DC Rack Status State Load Owns Token 192.168.0.103 datacenter1 rack1 Up Normal 151.96 KB 100.00% 38174485210079977599903748344879358256 Could someone tell me where the problem lies?

  Read the article

• Keys and terminology

  - by nabbed

  I have a predicament related to terminology. Our system processes events. Events are dispatched to a node based on the value of some field (or set of fields). We call this set of fields the key. We call the value of that set of fields the key value. What adds confusion is that each event is essentially a bag of key-value pairs (i.e., a hash map). So the word key is used for two different purposes: 1) to describe the set of fields on which the event is dispatched, and 2) as a field name. So if you had a collection of key-value pairs, and a set of those key-value pairs made up a database-style key, what terminology would you use to distinguish those two? (One further complication is that the key on which the event is dispatched is not always unique. For instance, if we dispatch on userid, and that user performs multiple actions, we will process multiple events with the same userid value. So maybe key is the wrong word to describe the set of fields on which we dispatch an event).

  Read the article

• CentOS 6.5 proxy bypass/no_proxy not working

  - by Naruto Uzumaki

  I am running CentOS 6.5 on my desktop. I've set the Network Proxy using the network proxy application provided under Preferences. I've also set the following exceptions: localhost,127.0.0.0/8,172.16.0.0/12,192.168.0.0./16 But whenever I am using wget (I'm testing the proxy settings using using wget) then wget tries to connect to the proxy for private addresses, but wget localhost works fine and doesn't use the proxy. I also removed all the proxy settings and set the proxy in the shell: export http_proxy="<proxy_url>:<port>" export https_proxy="<proxy_url>:<port>" export no_proxy="localhost,127.0.0.0/8,172.16.0.0/12,192.168.0.0./16" It work when I use the command wget <external_url> or wget localhost but fails when I use the command wget <private address from the $no_proxy variable>. I also tried setting the variables in Ubuntu 14.04 also and facing the same issue. Regards,

  Read the article

• Setting ivar in objective-c from child view in the iPhone

  - by Ivan

  Hi there! Maybe a FAQ at this website. I have a TableViewController that holds a form. In that form I have two fields (each in it's own cell): one to select who paid (single selection), and another to select people expense is paid for (multiple selection). Both fields open a new TableViewController included in an UINavigationController. Single select field (Paid By) holds an object Membership Multiple select field (Paid For) holds an object NSMutableArray Both vars are being sent to the new controller identically the same way: mySingleSelectController.crSelectedMember = self.crPaidByMember; myMultipleSelectController.crSelectedMembers = self.crSelectedMembers; From Paid for controller I use didSelectAtIndexPath method to set a mutable array of Memberships for whom is paid: if ([[tableView cellForRowAtIndexPath:indexPath] accessoryType] == UITableViewCellAccessoryCheckmark) { [self.crSelectedMembers removeObject:[self.crGroupMembers objectAtIndex:indexPath.row]]; //... } else { [self.crSelectedMembers addObject:[self.crGroupMembers objectAtIndex:indexPath.row]]; //... } So far everything goes well. An mutable array (crSelectedMembers) is perfectly set from child view. But... I have trouble setting Membership object. From Paid By controller I use didSelectAtIndexPath to set Membership: [self setCrSelectedMember:[crGroupMembers objectAtIndex:indexPath.row]]; By NSlogging crSelectedMember I get the right selected member in self, but in parent view, to which ivar is pointed, nothing is changed. Am I doing something wrong? Cause I CAN call the method of crSelectedMembers, but I can't change the value of crSelectedMember.

  Read the article

• OpenDNS servers initial response is very slow

  - by Ben Collins

  I've got a Time Warner cable ISP package (RoadRunner), and the modem they gave me doesn't allow me to specify which DNS servers to use; it always uses whatever the upstream dhcp server gives it. I prefer to use OpenDNS on my home network, so i've configured a couple of my PCs manually in the Windows adapter settings for IPv4 such that their IP addresses are obtained via DHCP, but the DNS server settings are fixed to the OpenDNS server IPs. Now, when I startup Windows on these PCs, it always takes 2-3 minutes to start receiving responses from the DNS servers; any request before that times out. While not debilitating, this is quite annoying. Any ideas why this might be happening?

  Read the article

• ASP.NET MVC 2: Mechanics behind an Order / Order Line in a edit form

  - by Dr. Zim

  In this question I am looking for links/code to handle an IList<OrderLine> in an MVC 2 edit form. Specifically I am interested in sending a complete order to the client, then posting the edited order back to an object (to persist) using: Html.EditorFor(m = m.orderlines[i]) (where orderlines is an enumerable object) Editing an Order that has multiple order lines (two tables, Order and OrderLine, one to many) is apparently difficult. Is there any links/examples/patterns out there to advise how to create this form that edits an entity and related entities in a single form (in C# MVC 2)? The IList is really throwing me for a loop. Should I have it there (while still having one form to edit one order)? How could you use the server side factory to create a blank OrderLine in the form while not posting the entire form back to the server? I am hoping we don't treat the individual order lines with individual save buttons, deletes, etc. (for example, they may open an order, delete all the lines, then click cancel, which shouldn't have altered the order itself in either the repository nor the database. Example classes: public class ViewModel { public Order order {get;set;} // Only one order } public class Order { public int ID {get;set;} // Order Identity public string name {get;set;} public IList<OrderLine> orderlines {get;set;} // Order has multiple lines } public class OrderLine { public int orderID {get;set;} // references Order ID above public int orderLineID {get;set;} // Order Line identity (need?) public Product refProduct {get;set;} // Product value object public int quantity {get;set;} // How many we want public double price {get;set;} // Current sale price }

  Read the article

• Using the MVVM Light Toolkit to make Blendable applications

  - by Dave

  A while ago, I posted a question regarding switching between a Blend-authored GUI and a Visual Studio-authored one. I got it to work okay by adding my Blend project to my VS2008 project and then changing the Startup Application and recompiling. This would result in two applications that had completely different GUIs, yet used the exact same ViewModel and Model code. I was pretty happy with that. Now that I've learned about the Laurent Bugnion's MVVM Light Toolkit, I would really like to leverage his efforts to make this process of supporting multiple GUIs for the same backend code possible. The question is, does the toolkit facilate this, or am I stuck doing it my previous way? I've watched his video from MIX10 and have read some of the articles about it online. However, I've yet to see something that indicates that there is a clean way to allow a user to either dynamically switch GUIs on the fly by loading a different DLL. There are MVVM templates for VS2008 and Blend 3, but am I supposed to create both types of projects for my application and then reference specific files from my VS2008 solution? UPDATE I re-read some information on Laurent's site, and seemed to have forgotten that the whole point of the template was to allow the same solution to be opened in VS2008 and Blend. So anyhow, with this new perspective it looks like the templates are actually intended to use a single GUI, most likely designed entirely in Blend (with the convenience of debugging through VS2008), and then be able to use two different ViewModels -- one for design-time, and one for runtime. So it seems to me like the answer to my question is that I want to use a combination of my previous solution, along with the MVVM Light Toolkit. The former will allow me to make multiple, distinct GUIs around my core code, while the latter will make designing fancy GUIs in Blend easier with the usage of a design-time ViewModel. Can anyone comment on this?

  Read the article

• Is it possible to disable the retry mechanism in Exim

  - by Tony Meyer

  I have a very simple Exim configuration that's just forwarding all mail to a set of destination addresses. When immediate delivery to an address fails, the message is added to the queue (and then processed by the retry rules). I want to change this so that if immediately delivery fails, the message is :blackhole:d. (It's ok if a bounce is generated instead, as I'll just redirect the bounce to the :blackhole:). This needs to occur for temporary failures (i.e. 4xx) as well as permanent (i.e. 5xx) ones. I understand that this means that if delivery can't be done immediately the message will be permanently and irretrievably lost. In this particular context, that isn't a problem. Reading over this, it sounds suspiciously like "how can I improve my spamming Exim server". That really isn't what this is for, and if you can figure out a way I can prove that, I'm happy to do so!

  Read the article

• freebsd ipfw tablearg.

  - by Shamanu4

  Hello. I'm configuring freebsd firewall and have such situation: 51000 pipe tablearg ip from not table(17) to table(20) out xmit ng* 51010 pipe tablearg ip from table(21) to not table(17) in recv ng* 51020 pipe tablearg ip from any to table(18) out xmit ng* 51030 pipe tablearg ip from table(19) to any in recv ng* tables 18,19,20,21 have client ip addresses and pipe numbers table 17 list of networks. rules 51020 and 51030 work fine but what is going at 51000 and 51010 ? How to determine firewall to take pipe number from tables 20 and 21 - not from 17 ?

  Read the article

• How do I connect to my wireless router settings on Linux?

  - by Joshua Robison

  My network is as follows: Internet Provider's DSL modem connected to Internet Provider's router connected to My Buffalo Wireless router connected to My Toshiba Laptop via WEP network My Toshiba Laptop is running LMDE Linux Mint Debian Edition Service Pack 3 i686 kernel I have experience using various routers and their configuration settings but for some reason I can not access my wireless router. In my cromium browser I tried the following ip addresses: Standard Usual IPs : 192.168.1.1, 192.168.0.1 (connection hangs and goes no where) On the back of my router: 192.168.11.1, 192.168.11.100 (connection hangs and goes nowhere ) In some tcpip info: 192.168.24.1 (unable to connect error message) If someone could give me some terminal commands that will help me find my wireless router address or some trouble shooting ideas, I would be very thankful.

  Read the article

• whats the point of @localhost entries for a mail server

  - by radman

  Hi, After recently setting up a mail server I am now adding the users that I need. As part of the tutorial I followed I created root@localhost as an account and also a bunch of aliases (postmaster@localhost, webmaster@localhost etc). What is the point of having al these localhost addresses? it seems that no one can ever mail them directly... Also I am curious as to what targets I should include on my domain (like postmaster, root, webmaster etc) and what ramifications there might be for doing so?

  Read the article

• Unit Testing a Java Chat Application

  - by Epitaph

  I have developed a basic Chat application in Java. It consists of a server and multiple client. The server continually monitors for incoming messages and broadcasts them to all the clients. The client is made up of a Swing GUI with a text area (for messages sent by the server and other clients), a text field (to send Text messages) and a button (SEND). The client also continually monitors for incoming messages from other clients (via the Server). This is achieved with Threads and Event Listeners and the application works as expected. But, how do I go about unit testing my chat application? As the methods involve establishing a connection with the server and sending/receiving messages from the server, I am not sure if these methods should be unit tested. As per my understanding, Unit Testing shouldn't be done for tasks like connecting to a database or network. The few test cases that I could come up with are: 1) The max limit of the text field 2) Client can connect to the Server 3) Server can connect to the Client 4) Client can send message 5) Client can receive message 6) Server can send message 7) Server can receive message 8) Server can accept connections from multiple clients But, since most of the above methods involve some kind of network communication, I cannot perform unit testing. How should I go about unit testing my chat application?

  Read the article

• Big mail issue two ip address

  - by Luka

  I have two ip addresses on my server, First IP is assigned to my clients, second is assigned to me. Issue started today. My clients can not send mail via php from their ip address (shared ip address which are all of them using). Server is refusing it with error ERROR: Password not accepted from server: 535 Incorrect authentication data But via their desktop mail clients it can send mail, when they use my ip address for hostname (second ip of server assigned to me) they can send mail. help.

  Read the article

• Bridge virtual machines out WLAN interface

  - by Thomas

  It seems that my wlan card (intel 5100 AGN) firmware doesn't allow "spoofing" MAC addresses. This has the side effect of destroying the capability to bridge out my virtual machines on that interface. Apparently this is a common thing on wlan cards. I can see the incoming traffic just fine in my virtual machines, but their DHCP queries don't get bridged out of the WLAN card. It works perfectly well when using the wired ethernet port. Is there a workaround for this? MAC-NAT or something? I don't want to route my virtual machines out to the Internet because I don't want my host OS to even have an IP address. I'm using Linux and KVM for virtualization.

  Read the article

• google.com different IP in different countries. How?

  - by HeavyWave

  If you ping google.com from different countries you will get replies from local google servers. How does that work? Can a DNS record have multiple A addresses? Could someone point me to the technology they use to do that? Update. OK, so Google's DNS server gives out a different IP based on the location. But, as Alexandre Jasmin pointed out, how do they track the location? Surely their DNS won't ever see your IP address. Is the server querying Google's DNS guaranteed to be from the location it represents?

  Read the article

• Odd behaviour with PHP's in_array function.

  - by animuson

  I have a function that checks multiple form items and returns either boolean(true) if the check passed or the name of the check that was run if it didn't pass. I built the function to run multiple checks at once, so it will return an array of these results (one result for each check that was run). When I run the function, I get this array result: Array ( [0] => 1 [1] => password [2] => birthday ) // print_r array(3) { [0]=> bool(true) [1]=> string(8) "password" [2]=> string(8) "birthday" } // var_dump The 'username' check passed and the 'password' and 'birthday' checks both failed. Then I am using simple in_array statements to determine which ones failed, like so: $results = $ani->e->vld->simulate("register.php", $checks); die(var_dump($results)); // Added after to see what array was being returned if (in_array("username", $results)) // do something if (in_array("password", $results)) // do something if (in_array("birthday", $results)) // do something The problem I'm having is that the 'username' line is still executing, even those 'username' is not in the array. It executes all three statements as if they were all true for some reason. Why is this? I thought maybe that the bool(true) was automatically causing the function to return true for every result without checking the rest of the array, but I couldn't find any documentation that would suggest that very odd functionality.

  Read the article

• In-document schema declarations and lxml

  - by shylent

  As per the official documentation of lxml, if one wants to validate a xml document against a xml schema document, one has to construct the XMLSchema object (basically, parse the schema document) construct the XMLParser, passing the XMLSchema object as its schema argument parse the actual xml document (instance document) using the constructed parser There can be variations, but the essense is pretty much the same no matter how you do it, - the schema is specified 'externally' (as opposed to specifying it inside the actual xml document). If you follow this procedure, the validation occurs, sure enough, but if I understand it correctly, that completely ignores the whole idea of the schemaLocation and noNamespaceSchemaLocation attributes from xsi. This introduces a whole bunch of limitations, starting with the fact, that you have to deal with instance<-schema relation all by yourself (either store it externally or write some hack to retrieve the schema location from the root element of the instance document), you can not validate the document using multiple schemata (say, when each schema governs its own namespace) and so on. So the question is: maybe I am missing something completely trivial or doing it wrong? Or are my statements about lxml's limitations regarding schema validation true? To recap, I'd like to be able to: have the parser use the schema location declarations in the instance document at parse/validation time use multiple schemata to validate a xml document declare schema locations on non-root elements (not of extreme importance) Maybe I should look for a different library? Although, that'd be a real shame, - lxml is a de-facto xml processing library for python and is regarded by everyone as the best one in terms of performace/features/convenience (and rightfully so, to a certain extent)

  Read the article

• OpenVPN Push DNS Not Working Correctly On Windows

  - by woodsbw

  I currently have OpenVPN server setup on an Ubuntu machine, as well as DNSMasq. I am wanting to push DNS to the client (road warrior setup.) I had the push "dhcp-option DNS x.x.x.x" where x.x.x.x was an open OpenDNS server, for testing, and everything was working when I connected from my Windows client But now that I have DNSMasq setup, and I changed the "dhcp-option DNS x.x.x.x" to the DNSMasq server, but when they client connects it still receives the old, OpenDNS DNS server IP. I'm at a bit of a loss here, I have tried flushing DNS on the client, rebooting the server, and I even grep'd the entire server to see if the OpenDNS IP was in some other config I was missing...it wasn't. One other note, when connect to the VPN and explicitly run nslookup against against the DNSMasq IP, the addresses resolve correctly, so it isn't a DNSMasq issue.

  Read the article

• Sync iPhone Mail with Webmail

  - by João Paulin

  I had an email account [email protected] hosted on Host A. This mailbox had 100 messages. I wanted to migrate to Host B, so I download all the 100 messages from Host A on my iPhone. Now that my site was successfully migrated to Host B and the email account [email protected] was created again (the mailbox is empty), how can I send the messages that I have downloaded on my iPhone to the mailbox on Host B? Note that the migration from Host A to Host B did not change the IMAP and SMTP adressess and parameters. I'm still using the same addresses, parameters and ports as before. The email accounts just switched hosting.

  Read the article

< Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >