Search Results

Search found 30258 results on 1211 pages for 'open ended'.

Page 413/1211 | < Previous Page | 409 410 411 412 413 414 415 416 417 418 419 420  | Next Page >

• Recovering Data from a Linkstation LS-WXL/R1

  - by kingkool68

  I've been running a Buffalo Linkstation LS-WXL/R1 in RAID1 for a few weeks. Two nights ago we had a brief power outage. Yesterday when I tried to mount the disk it couldn't be found. I logged in to the web admin and it couldn't see any storage attached and no arrays available. Well this sucks. I ended up taking the disks out and mounting them to an Ubuntu virtual machine. They how up as an Array but I can't start the Array to the best of my limited knowledge. I could still see the 6 partitions, so I'm confident the data is there. I can use Photorec (http://www.cgsecurity.org/wiki/PhotoRec) to recover most of the files I want, it just takes some time. Could I make an image of the data partition and mount that in Ubuntu so I can get at the data I want through the file system? 95% of the data on my Linkstation LS-WXL/R1 is backup. I just put a few folders of images on there that I need to get back. I'm already preparing to format the disks when I'm done and re-building the RAID1 array from scratch. Any advice would be appreciated.

  Read the article

• Wrong Outlook anywhere settings

  - by Ken Guru

  Hey all I wanted to enable NTLM authentication on OutlookAnywhere, and after doing the command Set-OutlookAnywhere -IISAuthenticationMethods Basic,NTLM, my settings got changed. This is a dump before I run the command: [PS] C:\Windows\system32Get-OutlookAnywhere ServerName : EXCAS01 SSLOffloading : False ExternalHostname : ClientAuthenticationMethod : Basic IISAuthenticationMethods : {Basic} MetabasePath : IIS:///W3SVC/1/ROOT/Rpc Path : C:\Windows\System32\RpcProxy Server : EXCAS01 AdminDisplayName : ExchangeVersion : 0.1 (8.0.535.0) Name : Rpc (Default Web Site) DistinguishedName : CN=Rpc (Default Web Site),CN=HTTP,CN=Protocols,CN= EXCAS01,CN=Servers,CN=Exchange Administrative Grou p (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=Fi rst Organization,CN=Microsoft Exchange,CN=Services ,CN=Configuration,DC=asp,DC=ssc,DC=no Identity : EXCAS01\Rpc (Default Web Site) Guid : 289b4865-caf1-4412-95ee-6fb0dff55e8b ObjectCategory : asp.ssc.no/Configuration/Schema/ms-Exch-Rpc-Http-V irtual-Directory ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtual Directory} WhenChanged : 05.01.2011 16:59:55 WhenCreated : 27.11.2009 11:20:12 OriginatingServer : IsValid : True Noticde the settings for "Name", "DistinguishedName", and "Identity". After I run the command, I ended up with this: [PS] C:\Windows\system32Get-OutlookAnywhere ServerName : EXCAS01 SSLOffloading : False ExternalHostname : ClientAuthenticationMethod : Basic IISAuthenticationMethods : {Basic, Ntlm} MetabasePath : IIS:///W3SVC/1/ROOT/Rpc Path : C:\Windows\System32\RpcProxy Server : EXCAS01 AdminDisplayName : ExchangeVersion : 0.1 (8.0.535.0) Name : EXCAS01 DistinguishedName : CN=EXCAS01,CN=HTTP,CN=Protocols,CN=EXCAS01,CN=Serv ers,CN=Exchange Administrative Group (FYDIBOHF23SP DLT),CN=Administrative Groups,CN=First Organizatio n,CN=Microsoft Exchange,CN=Services,CN=Configurati on,DC=asp,DC=ssc,DC=no Identity : EXCAS01\EXCAS01 Guid : 289b4865-caf1-4412-95ee-6fb0dff55e8b ObjectCategory : asp.ssc.no/Configuration/Schema/ms-Exch-Rpc-Http-V irtual-Directory ObjectClass : {top, msExchVirtualDirectory, msExchRpcHttpVirtual Directory} WhenChanged : 06.01.2011 09:43:50 WhenCreated : 27.11.2009 11:20:12 OriginatingServer : ASP-DC-2. IsValid : True Now, the "Name", "DistinguishedName" and "Identity" has changed, and when I try to change it back by running "Set-OutlookAnywhere -Identity "EXCAS01\Rpc (Default Web Site)", I get the following error: [PS] C:\Windows\system32Set-OutlookAnywhere -Identity "EXCAS01\Rpc (Default Web Site)" Set-OutlookAnywhere : The operation could not be performed because object 'EXCA S01\Rpc (Default Web Site)' could not be found on domain controller 'ASP-DC-2.'. Remember, the RPC over HTTP works fine with Basic authentication (even with the wrong settings), but NTLM still doesnt work. How do I change back the settings?

  Read the article

• Database mirroring login failure attempts on mirror server

  - by Chandan

  I have configured database mirroring between two servers at a distance 40 miles away from each other. Server specifications: SQL Server 2008,Standard Edition 64-bit This is same for principal,mirror and witness. The configuration is high-safety with automatic failover Initially we tested our .net application(web application) on both the principal and mirror and made sure that the login is not orpahned. Things run fine generally.But sometimes on the mirror server,I see login failed attempts: Login failed for user 'd0main\user'. Reason: Failed to open the explicitly specified database. [CLIENT: xx.xx.x.x] Message Error: 18456, Severity: 14, State: 38. This error appears 3-4 times a day but not more than that. My question to the experts is:If the principal is alive so why the application tries to connect to mirror.The default time-out for a .net webpage is 30 seconds,so is it possible that the application tries to connect principal and after 30 seconds even if principal is alive,it assumes that it is dead and thus tries to open a connection to mirror where it fails. Please help me with this problem.

  Read the article

• Free web-based software for team collaboration/documentation

  - by Jason Antman

  Looking for some advice here, as my search has turned up to be pretty fruitless. My group (9 people - SAs, programmers, and two network guys) is looking for some sort of web tool to... ahem... "facilitate increased collaboration" (we didn't use a buzzword generator, I swear). At the moment, we have an unified ticketing system that's braindead, but is here to stay for political/logistical reasons. We've got 2 wikis ("old" and "new"), neither of which fulfill our needs, and are therefore not used very often. We're looking for a free (as in both cost and open source) web-based tool. Management side: Wants to be able to track project status, who's doing what, whether deadlines are being met, etc. Doesn't want full-fledged "project management" app, just something where we can update "yeah this was done" or "waiting for Bob to configure the widgets". TeamBox (www.teambox.com) was suggested, but it seems almost too gimmicky, and doesn't meet any of the other requirements: Non-management side: - flexible, powerful wiki for all documentation (i.e. includes good tables, easy markup, syntax highlighting, etc.) - good full text search of everything (i.e. type in a hostname and get every instance anyone ever uttered that name) - task lists or ToDo lists, hopefully about to be grouped into a number of "projects" - file uploads - RSS or Atom feeds, email alerts of updates We're open to doing some customizations (adding some features, notification/feeds, searching, SVN integration, etc.) but need something F/OSS that will run under Apache. My conundrum is that most of the choices I've found so far fall into one of these categories: project management/task tracking with poor wiki/documentation/knowledge base support wiki with no task tracking support ticketing system with everything else bolted on (we already have one that we're stuck with) code-centric application (we do little "development", mostly SA work) Any suggestions? Or, lacking that, any comments on which software would be easiest to add the lacking features to (hopefully ending up with something that actually looks good and works well)?

  Read the article

• Filezilla client unable to get directory listing from Filezilla Server (Windows)

  - by sestocker

  I've set up a self signed certificate in FileZilla server and enabled FTP over SSL/TPS. When I connect from the client FileZilla, I am able to authenticate but cannot get a directory listing: Status: Connecting to MY_SERVER_IP:21... Status: Connection established, waiting for welcome message... Response: 220-FileZilla Server version 0.9.39 beta Response: 220-written by Tim Kosse ([email protected]) Response: 220 Please visit http://sourceforge.net/projects/filezilla/ Command: AUTH TLS Response: 234 Using authentication type TLS Status: Initializing TLS... Status: Verifying certificate... Command: USER MYUSER Status: TLS/SSL connection established. Response: 331 Password required for MYUSER Command: PASS ******** Response: 230 Logged on Command: PBSZ 0 Response: 200 PBSZ=0 Command: PROT P Response: 200 Protection level set to P Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I Command: PORT 10,10,25,85,219,172 Response: 200 Port command successful Command: MLSD Response: 150 Opening data channel for directory list. Response: 425 Can't open data connection. Error: Failed to retrieve directory listing I have ports 21 and 50001 through 50005 open on the firewall. We are migrating servers - the 50001 - 50005 is one of the things that helped get FTPS working on the old server. I'm not sure this installation would use the same ports? What else could be the problem?

  Read the article

• Spammer relaying via Postfix mail server

  - by Paddington

  I have a Plesk 9.5 mail server (cm.snowbarre.co.za) on Ubuntu 8.04 LTS which forwards all SMTP traffic to an anti-spam server cacti.snowbarre.co.za. Many times I see the headers on the anti-spam server to contain from addresses not hosted on the mail server and I have checked and confirmed that my server is not an open relay server. How can a spammer be using my server to relay spam traffic? How can I stop this? Open relay test: paddington@paddington-MS-7387:~$ telnet cm 25 Trying 196.201.x.x... Connected to cm. Escape character is '^]'. 220 cm.snowbarre.co.za ESMTP Postfix (Ubuntu) mail from:[email protected] 250 2.1.0 Ok rcpt:[email protected] 221 2.7.0 Error: I can break rules, too. Goodbye. Connection closed by foreign host. paddington@paddington-MS-7387:~$ A typical headers is: *Received from cm.snowbarre.co.za (cm.snowbarre.co.za[196.201.x.x]) by cacti.snowbarre.co.za (Postfix) with ESMTPS id 00B601881AD; Mon, 27 Aug 2012 14:03:29 +0200 (SAST) Received from cm.snowbarre.co.za (localhost [127.0.0.1]) by cm.snowbarre.co.za (Postfix) with ESMTP id 81627367E007; Mon, 27 Aug 2012 14:02:50 +0200 (SAST) Received from User (ml82.128.x.x.multilinksg.com [82.128.x.x]) by cm.snowbarre.co.za (Postfix) with ESMTP; Mon, 27 Aug 2012 14:02:49 +0200 (SAST) Reply-To <[email protected]> From "Ms Nkeuri Aguiyi"<[email protected]> Subject Your Unpaid Fund. Date Mon, 27 Aug 2012 05:03:22 -0700 MIME-Version 1.0 Content-Type text/html; charset="Windows-1251" Content-Transfer-Encoding 7bit X-Priority 3 X-MSMail-Priority Normal X-Mailer Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE Produced By Microsoft MimeOLE V6.00.2600.0000 X-Antivirus avast! (VPS 120821-0, 08/21/2012), Outbound message X-Antivirus-Status Clean Message-Id <[email protected]> To undisclosed-recipients:;*

  Read the article

• How flexible is the 'indirect' function?

  - by Chuck

  My curiosity pushes me to ask this question. If I were to have a series of functions that referenced a different column in a worksheet but all ended on the same row of data is there a way to point the 'row' part of a cell reference to a blank cell and use it has a variable to show the results of the functions up to a desired row simultaneously? Example: =Average('worksheet 1'.$A$1:'worksheet 1'.$A100) =Max('worksheet 1'.$B$1:'worksheet 1'.$B100) =Min('worksheet 1'.$C$1:'worksheet 1'.$C100) =Sum('worksheet 1'.$D$1:'worksheet 1'.$D100) Pseudo formulas... =Average('worksheet 1'.$A$1:'worksheet 1'.$A*('worksheet 2'.$A$1)*) =Max('worksheet 1'.$B$1:'worksheet 1'.$B*('worksheet 2'.$A$1)*) =Min('worksheet 1'.$C$1:'worksheet 1'.$C*('worksheet 2'.$A$1)*) =Sum('worksheet 1'.$D$1:'worksheet 1'.$D*('worksheet 2'.$A$1)*) Where 'worksheet 2'.$A$1 would only contain a number corresponding to a row in 'worksheet 1'. After stumbling upon and playing with the indirect() function I have only been able to replace the entire cell reference (Column and Row) with any success. The formula so far =SUM('worksheet 1'.C3:INDIRECT(A1)) Where A1 is on 'worksheet 2' and contains a full cell reference pointing to 'worksheet 1'. Any pointers?

  Read the article

• /etc/security/limits.conf for setting program limits in Linux

  - by Flavius Akerele

  I have the following inside /etc/security/limits.conf (I have specified root separately because * will not include it.) user2 - core unlimited * - core 0 root - core 0 * - rss 512000 root - rss 512000 * - nproc 100 root - nproc 100 * - maxlogins 1 root - maxlogins 1 I run a program as user2 (./programname) but /proc/3498/limits says cores are disabled: Limit Soft Limit Hard Limit Units Max cpu time unlimited unlimited seconds Max file size unlimited unlimited bytes Max data size unlimited unlimited bytes Max stack size 8388608 unlimited bytes Max core file size 0 0 bytes Max resident set 524288000 524288000 bytes Max processes 100 100 processes Max open files 1024 1024 files Max locked memory 65536 65536 bytes Max address space unlimited unlimited bytes Max file locks unlimited unlimited locks Max pending signals 14001 14001 signals Max msgqueue size 819200 819200 bytes Max nice priority 0 0 Max realtime priority 0 0 Max realtime timeout unlimited unlimited us Both ulimit -Sa and ulimit -Ha output that cores are disabled: core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 14001 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) 512000 open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) unlimited cpu time (seconds, -t) unlimited max user processes (-u) 100 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited Why are cores disabled ?

  Read the article

• SSH X11 forwarding does not work. Why?

  - by Ole Tange

  This is a debugging question. When you ask for clarification please make sure it is not already covered below. I have 4 machines: Z, A, N, and M. To get to A you have to log into Z first. To get to M you have to log into N first. The following works: ssh -X Z xclock ssh -X Z ssh -X Z xclock ssh -X Z ssh -X A xclock ssh -X N xclock ssh -X N ssh -X N xclock But this does not: ssh -X N ssh -X M xclock Error: Can't open display: The $DISPLAY is clearly not set when logging in to M. The question is why? Z and A share same NFS-homedir. N and M share the same NFS-homedir. N's sshd runs on a non standard port. $ grep X11 <(ssh Z cat /etc/ssh/ssh_config) ForwardX11 yes # ForwardX11Trusted yes $ grep X11 <(ssh N cat /etc/ssh/ssh_config) ForwardX11 yes # ForwardX11Trusted yes N:/etc/ssh/ssh_config == Z:/etc/ssh/ssh_config and M:/etc/ssh/ssh_config == A:/etc/ssh/ssh_config /etc/ssh/sshd_config is the same for all 4 machines (apart from Port and login permissions for certain groups). If I forward M's ssh port to my local machine it still does not work: terminal1$ ssh -L 8888:M:22 N terminal2$ ssh -X -p 8888 localhost xclock Error: Can't open display: A:.Xauthority contains A, but M:.Xauthority does not contain M. xauth is installed in /usr/bin/xauth on both A and M. xauth is being run when logging in to A but not when logging in to M. ssh -vvv does not complain about X11 or xauth when logging in to A and M. Both say: debug2: x11_get_proto: /usr/bin/xauth list :0 2>/dev/null debug1: Requesting X11 forwarding with authentication spoofing. debug2: channel 0: request x11-req confirm 0 debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. I have a feeling the problem may be related to M missing in M:.Xauthority (caused by xauth not being run) or that $DISPLAY is somehow being disabled by a login script, but I cannot figure out what is wrong.

  Read the article

• Why doesn't the Windows 7 volume mixer remember per-application levels for all applications?

  - by mdives

  If I have the device's master level set to 50, and then lower an application level to 25; Once I close that application and reopen it, the volume levels should persist. The master level should remain at 50 and the application's at 25. This does happen for most applications. However, for one in particular, Napster, it does not. I subscribe to Napster's streaming service. I use the Napster desktop application to connect to that service. Every time that I open the Napster app, I have to adjust the application's volume level down in the volume mixer. When I open the app again after closing it, I have to do the same thing, the volume mixer is not remembering the set level. In fact. The level is reset back to 50, the same level as the device's master level. Has anyone else experienced this, with Napster or any other application? Is there a solution or is this a known issue?

  Read the article

• Multi-IP address zimbra server DNS PTR records and spam

  - by David Fraser

  We have a mail server running Zimbra (ZCS 6.0.8). The server has 5 active public IP addresses in the same subnet. (.226-.230). I currently have A records for each of these (host0.domain.com..host4.domain.com), with the main host.domain.com of the machine pointing to .226. Our host has ended up being listed on the SORBS DUHL list (even though it's in a server farm). According to them you can get removed quickly by checking that your host has an MX record, an A record, and a PTR record that points back to the hostname given in the MX record. I tried setting the PTR records so that each of these addresses resolved back to their A record (i.e. .228 had a PTR to host2.domain.com). However, I then got mail being rejected from other servers because when Postfix (under Zimbra control) sends out mail, it uses the main hostname for the HELO - there doesn't seem to be any way to override it. So the PTR records currently say host.domain.com for all 5 IP addresses. What's the correct way to handle this? Should I have an A record for the domain that points to all the IP addresses (for round-robin handling)? I'm nervous of changes that could cause problems, so I'm wondering what the standard way to handle a multiple-IP-address mail server is.

  Read the article

• What could cause the file command in Linux to report a text file as data?

  - by Jonah Bishop

  I have a couple of C++ source files (one .cpp and one .h) that are being reported as type data by the file command in Linux. When I run the file -bi command against these files, I'm given this output (same output for each file): application/octet-stream; charset=binary Each file is clearly plain-text (I can view them in vi). What's causing file to misreport the type of these files? Could it be some sort of Unicode thing? Both of these files were created in Windows-land (using Visual Studio 2005), but they're being compiled in Linux (it's a cross-platform application). Any ideas would be appreciated. Update: I don't see any null characters in either file. I found some extended characters in the .cpp file (in a comment block), removed them, but file still reports the same encoding. I've tried forcing the encoding in SlickEdit, but that didn't seem to have an effect. When I open the file in vim, I see a [converted] line as soon as I open the file. Perhaps I can get vim to force the encoding?

  Read the article

• How to set up a VPN Incoming connection with Windows to tunnel Internet traffic?

  - by Mehrdad

  I want to set up a VPN on a remote server to route all my Internet traffic for privacy reasons. I can set up an incoming connection and connect to it successfully. The problem is, I can just see the remote computer and no other Web sites will open. I want the remote server to act like a NAT. How can I do that? Note that I don't want to split Internet traffic. I actually want to send all the traffic to the remote server but need to make it relay the traffic. For the record, my remote server is Windows Web Server 2008 which does not have routing and remote access service. Clarification I'm mostly interested in server configuration. I don't have any problems configuring the client. By the way, Windows Web Server 2008 seems to have the same VPN features built in client OSes (like Vista) and specifically, it doesn't include the RRAS console in MMC. I'm also open to suggestions regarding third party PPTP/L2TP daemons available, if they are free.

  Read the article

• Improving browser performance while using lots of tabs?

  - by Andrew

  My browsing habits cause me to open lots of windows and tabs, either related to different projects I'm working on or things I may want to read later. I use OSX and use about 5 spaces with multiple windows in each space. The problem is eventually I'll have around 200 or more tabs open (spread over 15-20 windows) that I don't want to close. Needless to say, my computer's performance starts to degrade. As I write this on my mobile, Safari on my laptop is locking up the computer. I used to use Chrome but found better performance with Safari. What I'd like to know, is there a graph of browser performance based on tab usage? I don't need a browser that keeps all tabs active. It would be great if the browser could increase performance by "putting tabs to sleep". Or if there was some sort of tool for saving a "workspace" of tabs that you could reactivate the next time you are working on that project. What sort of solution can you recommend to solve this problem?

  Read the article

• AWS Linux EC2: yum won't run with plugins

  - by Patrick

  Short Version: yum commands on my Amazon Linux EC2 AMI only work with --noplugins. Long Version: A couple of days ago, I ran yum update at the behest of the SSH Login MoTD telling me I had updates to install. About midway through the update (specifically while updating the kernel), the update abruptly ended (79 of 138 items completed). The website I host on EC2 got weird for a few minutes, but eventually seemed to stabilize back out (maybe EC2 restarted itself?), and I didn't have further issues (other than MySQL started running out of memory, but I think that's probably unrelated to this). Today, I went to install gcc-c++ (with yum install gcc-c++). When I did, I got the following message: Loaded plugins: priorities, security, update-motd, upgrade-helper Config error: Command "updateinfo" already defined and I get that for any command I can think to run using yum. However, If I throw in the --noplugins flag, then magically it seems to work. To be clear, when I installed a different package a week ago, it worked totally correctly, so the yum update is the only thing I can think of that changed. I could find nothing on Google with regard to "updateinfo" already defined (with and without quotes). I tried running yum update --noplugins which spit out a message telling me that I should have run yum-complete-transaction instead, but proceeded to try to update something on its own. When that completed, I tried yum-complete-transaction but that gave me a message about the transactions not lining up correctly, so it removed the old transaction (Probably since I should have completed the first transaction before trying to update again, if I had known). Based on the SF question "Linux EC2 Broken Yum", I've also tried yum clean all --noplugins (fails the same with plugins) which just gives me Cleaning repos: amzn-main amzn-updates rpmforge Cleaning up everything I also tried package-cleanup --problems Loaded plugins: priorities, update-motd, upgrade-helper No Problems Found and package-cleanup --dupes Gives a lot of dupes, so I pasted them here: http://pastebin.com/VVFQEkTT instead of inline. At this point, I'm not sure what else there even is to check.

  Read the article

• Suggestions for accessing SQL Server from internet

  - by Ian Boyd

  i need to be able to access a customer's SQL Server, and ideally their entire LAN, remotely. They have a firewall/router, but the guy responsible for it is unwilling to open ports for SQL Server, and is unable to support PPTP forwarding. The admin did open VNC, on a non-stanrdard port, but since they have a dynamic IP it is difficult to find them all the time. In the past i have created a VPN connection that connects back to our network. But that didn't work so well, since when i need access i have to ask the computer-phobic users to double-click the icon and press Connect i did try creating a scheduled task that attempts to keep the VPN connection back to our office up at all times by running: >rasdial "vpn to me" But after a few months the VPN connection went insane, and thought it was both, and neither, connected an disconnected; and the vpn connection wouldn't work again until the server was rebooted. Can anyone think of a way where i can access the customer's LAN that doesn't involve opening ports on the router needing to know their external IP customer interaction of any kind Blah blah blah use vpn vnc protocol has known weaknesses you are unwise to lower your defenses it's not wise to expose SQL Server directly to the internet you stole that line from Empire Customer doesn't care about any of that. Customer wants things to work.

  Read the article

• Durability of Websockets Server

  - by smitchell360

  I am starting to experiment with websockets. Does anyone know of a websockets server (open source or paid) that provides a durable store of the websocket "channel"? All of the examples that I have found do not address durability -- if a websockets server goes down, all "channel" data is lost. Services such as Pusher do not really discuss whether they address the durability issue (and I have not received a response from tech support yet). Happy to roll my own, but would rather not reinvent the wheel. EDIT: I'm not looking for websockets 101 information. That is readily available and understood. I'm looking for a server (open source or paid) that supports websockets and has a durable store for the websocket data so that, in the event that a server fails, a new server can take over where the original one left off. Two main purposes: 1. support failover scenarios contemplated by the websockets Network Working Group http://tools.ietf.org/html/draft-ibc-websocket-dns-srv-02#section-5.1 (most importantly so that missed messages are sent when a client connects to a failover server) 2. support scenarios where new subscribers must receive all past messages that were published. Of course this can be handled at the application layer...but that is not what I am looking for.

  Read the article

• Is it possible to stop the "Beep" device on all computers in a Windows network?

  - by sharptooth

  On Windows the default behavior it to make an annoying "beep" sound every time Windows things something notable happened. The result is that when someone send a company-wide email via the MS Exchange all computers around my cubicle beep one by one. This is annoying and makes no sense. Luckily beeping can be shut off. Someone has to: open the "Device Manager", select "View - Show hidden devices", find the "Beep" device in "Non-Pug and Play Devices" node, open its properties, go to the "Driver" tab, set "startup type" to "Disabled" and click "Stop". The "Beep" device will stop and no longer produce the useless sound. This solution however requires tracking every computer and then talking to its user which is not very convenient. Device Manager doesn't allow stopping a device on another computer. I'm looking for a solution that can be deployed by the administrators team. We have a domain and the administrators even install the programs company-wide automatically. Are there any means to stop the "Beep" device an all computers in the Windows network with some remote-administration features automatically?

  Read the article

• Passive FTP Server Port Configuration Troubles Win2003

  - by Chris

  Win2003 Ports 20 & 21 are open IIS6 - Direct Metabase Edit enabled Configured FTP service passive range to 5500-5550 5500-5550 added to windows firewall iisreset and double checked by restarting ftp service nothing has changed, when I connect and enter passive, it still hangs when ever I try to LIST or transfer files. Active is just as useless. Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\user>ftp ftp> open x.x.x.x Connected to x.x.x.x. 220-Microsoft FTP Service xxxxxxxxxxxxxxxxxx 220 xxxxxxxxxxxxxxxxxx User (x.x.x.x:(none)): user 331 Password required for user. Password: 230-YOUR ACTIVITY IS BEING RECORDED TO THE FULLEST EXTENT 230 User user logged in. ftp> QUOTE PASV 227 Entering Passive Mode (82,19,25,134,21,124) ftp> ls 200 PORT command successful. 150 Opening ASCII mode data connection for file list. and it hangs.. Now I can see from microsooft documentation that on newer windows releases, additional steps such as these are suggested, but they dont work on 2003... netsh advfirewall firewall add rule name=”FTP Service” action=allow service=ftpsvc protocol=TCP dir=in netsh advfirewall set global StatefulFTP disable is there anything I am missing, what is this StatefulFTP malarkey at the end EDIT I can connect and transfer binary files using WinSCP client - Therefore the problem must be with my ftp commands no? Can anyone see anything wrong with my windows ftp client example? why would it hang on ls, i tried QUOTE LIST as well, and that just hangs, and the windows ftp client doesnt work in active, it hangs if I try to go "binary" then put - This worked before I added 5500-5550 on the router. I have since added this range to the router but no difference to the windows ftp client.

  Read the article

• Configure PEAR on CentOS 6 and PLESK

  - by RCNeil

  I'm hoping to get a little assistance with configuring PEAR to work properly. I have a PHP file that's calling PEAR's mail and mail-mime files, and I believe I am missing some steps because I keep getting the very common Warning: include_once(Mail.php): failed to open stream: No such file or directory Warning: include_once(Mail_Mime/mime.php): failed to open stream: No such file or directory It is installed - Installed packages, channel pear.php.net: ========================================= Package Version State Archive_Tar 1.3.7 stable Console_Getopt 1.2.3 stable Mail 1.2.0 stable Mail_Mime 1.8.3 stable PEAR 1.9.4 stable Structures_Graph 1.0.4 stable XML_RPC 1.5.4 stable XML_Util 1.2.1 stable And according to this TUT, I need to configure it appropriately in each vhost. I have already gone through and adjusted the php.ini file, but when the TUT speaks of the php_admin_value open_basedir "/var/www/vhosts/example.com/httpdocs:/tmp:/usr/share/pear:/local/PEAR" in my /var/www/vhosts/example.com/conf/httpd.include file I kind of get lost. There are several httpd.include files in that directory, all preceded with very long numerical strings. All I want to do is have an email attachment in my form.... Any insight or similar experiences shared would be greatly appreciated.

  Read the article

• Installing Ruby 1.9.3 OSX 10.7.4 breaks after altering PATH

  - by R V

  I was having trouble installing ruby 1.9.3-p194 from ruby 1.8.7 on my mac osx 10.7.4. I have was trying to fix my homebrew after running "brew doctor" and got the message of "/usr/bin occurs before /usr/local/bin This means that system-provided programs will be used instead of those provided by Homebrew. The following tools exist at both paths: c++-4.2 cpp-4.2 erb g++-4.2 gcc-4.2 gcov-4.2 gem i686-apple-darwin11-cpp-4.2.1 i686-apple-darwin11-g++-4.2.1 i686-apple-darwin11-gcc-4.2.1 irb rake rdoc ri ruby testrb" I fixed it by entering the following, which I found on another stackoverflow answer: export PATH="/usr/local/bin:/usr/local/sbin:~/bin$PATH" Lo and behold! when I typed that ruby updates to 1.9.3-p194. Ruby files seem to compile and run just fine. However, afterward, my navigation around terminal is messed up severely. For instance I can't do the command "open example_file.html" and have the file pop up in Chrome, instead I get the error: "-bash: open: command not found" Also, when I change directory, I get an error, inputting "$ cd desktop" yields the output, "-bash: dirname: command not found" but the directory does then changes... strange. When I exit out of a terminal window all this resets. I'm back to Ruby 1.8.7, have to use the PATH command again to update to 1.9.3, command line navigation gets broken again. Any guidance on how to remedy so I can use 1.9.3-p194 and also have normal terminal navigation would be greatly appreciated.

  Read the article

• Changes to grub in ubuntu 10

  - by jdege

  I've been running CentOS 5 for some years. I've decided to upgrade to Ubuntu, and with 10.04 just out, this seemed like a good time. I'm a tad paranoid, so I started off with a new set of drives - one to install on, one to backup to, and one as a spare. I removed my existing CentOS 5 drives, and did an install, and had no problems. I installed the server version, and used the default full-disk LVM installation. Next, I copies my backup scripts over, edited them to work with the new configuration, and did a test backup. That worked fine, as well. Then comes the real test, could I do an install of the backup onto the spare drive? (I won't put anything of importance on a system that doesn't have a reliable backup, and if I've never done a restore, it's not reliable.) I booted from a System Rescue CD (ver 1.5.3), with the spare drive as /dev/sda, and the backup drive as /dev/sdb. I had no trouble in partitioning, configuring LVM, formatting, making swap, or restoring the file systems. But when I got to restoring grub to the MBR, I ran into problems. My restore instructions from CentOS 5 said run grub, then enter two commands: root (hd0,0) setup (hd0) The first command exits with an error: "Checking if /boot/grub/stage1 exists ... no" I did some googling around, and found that the Grub2 included in recent Ubuntus is very different than the Grub 0.97 included in CentOS 5. One site suggested I use: grub-install --root-dir=/mnt/restore /dev/sda That appeared to work, but when I booted from the drive, I ended up at a grub prompt. Any ideas as to what I need to do? It seems like a simple problem, but my attempts at searching out answers on the web are being swamped by references to the old version of Grub. Help would be appreciated.

  Read the article

• /etc/security/limits.conf for setting program limits in Linux

  - by Flavius Akerele

  I have the following inside /etc/security/limits.conf (I have specified root separately because * will not include it.) user2 - core unlimited * - core 0 root - core 0 * - rss 512000 root - rss 512000 * - nproc 100 root - nproc 100 * - maxlogins 1 root - maxlogins 1 I run a program as user2 (./programname) but /proc/3498/limits says cores are disabled: Limit Soft Limit Hard Limit Units Max cpu time unlimited unlimited seconds Max file size unlimited unlimited bytes Max data size unlimited unlimited bytes Max stack size 8388608 unlimited bytes Max core file size 0 0 bytes Max resident set 524288000 524288000 bytes Max processes 100 100 processes Max open files 1024 1024 files Max locked memory 65536 65536 bytes Max address space unlimited unlimited bytes Max file locks unlimited unlimited locks Max pending signals 14001 14001 signals Max msgqueue size 819200 819200 bytes Max nice priority 0 0 Max realtime priority 0 0 Max realtime timeout unlimited unlimited us Both ulimit -Sa and ulimit -Ha output that cores are disabled: core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 14001 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) 512000 open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) unlimited cpu time (seconds, -t) unlimited max user processes (-u) 100 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited Why are cores disabled ?

  Read the article

• installing lots of perl modules

  - by Colin Pickard

  Hi, I've been landed with the job of documenting how to install a very complicated application onto a clean server. Part of the application requires a lot of perl scripts, each of which seem to require lots of different perl modules. I don't know much about perl, and I only know one way to install the required modules. This means my documentation now looks this: Type each of these commands and accept all the defaults: sudo perl -MCPAN -e 'install JSON' sudo perl -MCPAN -e 'install Date::Simple' sudo perl -MCPAN -e 'install Log::Log4perl' sudo perl -MCPAN -e 'install Email::Simple' (.... continues for 2 more pages... ) Is there any way I can do all this one line like I can with aptitude i.e. Type the following command and go get a coffee: sudo aptitude install openssh-server libapache2-mod-perl2 build-essential ... Thank you (on behalf of the long suffering people who will be reading my document) EDIT: The best way to do this is to use the packaged versions. For the modules which were not packaged for Ubuntu 10.10 I ended up with a little perl script which I found here ) #!/usr/bin/perl -w use CPANPLUS; use strict; CPANPLUS::Backend->new( conf => { prereqs => 1 } )->install( modules => [ qw( Date::Simple File::Slurp LWP::Simple MIME::Base64 MIME::Parser MIME::QuotedPrint ) ] ); This means I can put a nice one liner in my document: sudo perl installmodules.pl

  Read the article

• changing filesystem format from xfs to ext4 without losing data

  - by A.Rashad

  I have a fresh Lucid Lynx (Ubuntu 10.04) running on a laptop. where I defined the filesystems as: mount point / on ext4 (46 Gb) mount point /home on jfs (63 GB) swap as 3 Gb I left the machine over night to do some task, without AC power supply. next day in the morning I found it on standby, task completed, but filesystem was not reachable. it gave me I/O error it seems that there is a problem with jfs and standby. anyways, to avoid any hassle, I want to move this mount point from jfs format to ext4. can I do this without losing data and without the need to place the data in a temporary location until transformation is done? sorry to mention that, but I recall back in the windows days, we would change a FAT16 to FAT32 or a FAT32 to NTFS without having to lose the data. I hope this is available on Linux. Update The /home filesystem was xfs not jfs, and it seems there is a bug with this filesystem for some reason, I had to re-install the OS twice until I ended up with ext4 for the entire / However, as a conclusion, it seems that there is no way to make a conversion

  Read the article

< Previous Page | 409 410 411 412 413 414 415 416 417 418 419 420  | Next Page >