Search Results

Search found 12365 results on 495 pages for 'core audio'.

Page 414/495 | < Previous Page | 410 411 412 413 414 415 416 417 418 419 420 421  | Next Page >

• Virtual Machine Network Services causes networking problems in Vista Enterprise 64 bit install

  - by Bill

  I have a Quad-core/8GB Vista Enterprise 64-bit (SP2) installation on which I installed Virtual PC 2007. I have a problem that is opposite of all that I found searching around the Internet--everybody has problems making network connections from their guest VM. When Virtual Machine Network Services is enabled in the protocol stack for my network card across a reboot, it causes access problems to the network. The amount of time to login in using a domain credentialed account is upwards of 3 minutes, then after reaching the desktop the network and sharing center shows that my connection to the domain is unauthenticated. Disabling and re-enabling the Virtual Machine Network Services (uncheck in network properties/apply/recheck/apply) fixes the problem. And as long as I have the VMNS disabled when I shutdown the restart runs smoothly. I just have to remember to enable after login and disable before shutdown. I have un-installed and re-installed Virtual PC 2007 multiple times with restarts between. The install consists of the SP1 + a KB patch for guest resolution fix. Any help would be greatly appreciated. Some additional information... At one point during my hairpulling and teethgnashing with this, I tried to ping my primary DC and observed some weird responses: (Our DC is 10.10.10.25, my dynamic IP was 10.10.10.203) Reply from 10.10.10.203, Destination host unreachable. Request timed out. Reply from 10.10.10.25: ... This is not consistently repeatable, but thought it might strike a chord with someone.

  Read the article

• Converting a Windows 2003 server

  - by Jim Bass

  We have a legacy database system based upon MS SQL running on Windows Server 2003. The client software will only run on Windows XP. We have recently had success converting a client into a virtual machine and running it under Fusion on Mac minis. So far, it is working incredibly well. So well, in fact, that we are now considering trying to convert the server to a virtual machine. This raises several questions, though: 1. The server uses a raid array. Does the VM virtualize the raid array? I only ask because in my experience Windows products don't like it when you change core hardware. 2. Is there any reason why running SQL server on a virtual machine won't work? It will be up 24/7. 3. Is there a different converter for servers? 4. Will I have to track down the licensing for MS SQL and Server 2003 or will they come across ok? 5. The company that designed the software is no longer in business. There is some fear that the software is somehow tied to the hardware configuration. We bought the hardware, but their engineers came out and configured the system. Will the virtual machine be able to spoof particular chip sets? Thanks! Jim Bass

  Read the article

• Software raid 0 with six disks performance

  - by user134880

  I have some problems with disk performance. I have 6 x WD 500Gb RE4 disks. Each disk gives 135Mb/sec throughput. All measurements are made with hdparm with options "-tT" (I know that it is just synthetic test, but I need some start point to make measurements). I have controller with Sil3124 x 4 ports PCI Express 1x So... RAID0 on controller with 2 disks gives 200Mb/s - ok, pcie limit. RAID0 on motherboard with 2 disks gives 270Mb/s - niceeee :) RAID0 on contorller with 4 disks gives 200Mb/s - ok, pcie limit. RAID0 on controller with 4 disks + 1 disks on motherboard = 340Mb/s ... :( RAID0 on controller with 4 disks + 2 disks on motherboard = 300Mb/s .... why? Any ideas? Maybe need more cpu power? Now there is Pentium D Dual core 2.8Ghz, 4Gb RAM. It is dedicated box for storage.. no other activity.

  Read the article

• Windows Server 2008 R2 running at a snail's pace

  - by Django Reinhardt

  Really weird problem here. Our main web server has started running at a snail's pace, for absolutely no reason we can discern. Even after restarting the machine, when there's no little or no ram usage and CPU usage is fluctuating between 0 and 30%, simple tasks, like opening Internet Explorer, or waiting for My Computer to open, take forever. There are no processes hogging system resources that we can see... the machine itself is just exhibiting extremely slow behaviour. I've never seen a machine do this. A lot of security updates had built up, so we decided to let Windows install them. When we looked through the history upon restarting, though, they had failed with error code 800706BA. I don't know if this could be related or not. Any help in this matter would be greatly appreciated. As mentioned in the title, we're running a Windows Server 2008 R2 machine. It's also running SQL Server and IIS. It has 16GB of RAM and a decent Quad Core processor. It's also been fine until now -- and we haven't changed a thing. Thanks for any help.

  Read the article

• Can't connect to Server Manager from Windows 7

  - by SAdmin317

  I have a Windows 7 Pro 64bit with SP1 desktop that has RSAT tools installed. I opened Server Manager and can't connect to the server (Server 2008 R2 core). I followed the guide to enable everything on the server, added a registry key to enable read-only on the device manager as well. On the Windows 7 PC I turned on winrm, did the quick config, and added the server IP and name as trusted hosts. I still get an error when connecting. "Connecting to the remote server failed with the following error message: The WinRM client cannot process the requests. If the authentication scheme is different from Kerberos, or if the client computer is not joined to a domain, then HTTPS transport must be used or the destination machine must be added to the TrustedHosts configuration setting...." I also added the name of the server to the windows 7 /etc/hosts file. Ping the server name translates to the IP of the server. Also opened up the firewall for "Remote Volume Management" Both machines are on the same Workgroup, using the same Administrator account, with the same password. Any help appreciated.

  Read the article

• What is the best cloud technology to use for MongoDB/GridFS database servers

  - by Nerian

  We are going to launch a service that will require between 1 and 2 GB for file storage per paid user. I am going to use GridFS for storing files. GridFS is a module for MongoDB that allows to store large files in de database. I am pondering the different options for storing the database. But since I am unexperienced at deployment and it is my first time with Mongodb I need your experience. Criteria: I want to spend my time developing my core business, that is, my own application. I am a Ruby on Rails developer. I do not like to mess with server configuration. Hence, I would like a fully managed hosting solution. But I would like to know about any other option, if you think it is worth it. It should be able to scale. Cloud style. Pay as you go. The lower the price, the better. So far I known of these services: https://mongohq.com/pricing https://mongomachine.com/pricing https://mongolab.com/about/pricing/ http://cloudcontrol.com/add-ons/mongodb/ And they seem to be OK for common needs, that is no file storage. But I am going to use GridFS, so the size matters. These services seems to scale, in price, quite poorly. MongoHQ: The larger plan max storage is 20 GB. Seems like a very little storage, for GridFS. MongoMachine: Flat price, 2.5$ per GB. I didn't found the limit. Seems like a good price, comparing the others. MongoLab: 3.984 GB max, which I don't think I will hit, so perfect. 8$ per GB, quite costly. CloudControl: The larger plan is 20 Gb. The custom service starts at 250€ plus some unspecified charge per GB. What is your experience with these services? Any downtimes? Other possibilities? Edit: Added meaning of GridFS

  Read the article

• VT-x not enabled on 2010 Mac Pro

  - by BlindingDawn

  To start I had a Hackintosh as per the instructions from Lifehacker.com before and moved everything to a new 2010 8 Core Mac Pro. I opted for a restore from the time machine backup rather than using the migration assistance. I believe this may have caused more problems but one in particular is the lack of VT-x support. When I checked Parallels Desktop under "Host Hardware" information, I get the following that shows that VT-x isn't enabled. <Cpu dyn_lists=""> <Number>16</Number> <Model>Intel(R) Xeon(R) CPU E5620 @ 2.40GHz</Model> <Mode>1</Mode> <Speed>2400</Speed> <VtxEnabled>0</VtxEnabled> <VtxMode>1</VtxMode> 1) Does Parallels Desktop support using VT-x? 2) Does this setting show that my VT-x isn't enabled? 3) Is there a way of fixing it so that it is enabled? 4) Is there a way of using my Time Machine backup as if I'm doing a restore using migration assistance and just restore the files and settings?

  Read the article

• Where is my problem? The P6X58D Premium Mobo, Windows 7, or other?

  - by Dylan Yaga

  I was having problems with my USB devices for an hour last night, and I am unable to determine the root cause of the problem. The two symptoms are: At seemingly random times (not consistently spaced by time or caused by any detectable event) my USB devices become "detached". Windows will play the USB disconnect sound and then the reconnect sound. The devices disconnected and then reconnected. My USB Keyboard will "stick" on one key for several seconds before processing any other keystroke made. The mouse also does not respond to clicks. I do not lose mouse movement or USB device connectivity. And after a moment of this several beeps will be emitted from the speakers. Hardware Specs: GFX Card: EVGA GeForce GTX 470 Superclocked 1280MB DDR5 PCIe Motherboard: ASUS P6X58D Premium Intel X58 Socket LGA1366 MB Processor: Intel Core i7-920 2.66Ghz 8M LGA1366 CPU Memory: Corsair Dominator 6144MB PC12800 DDR3 Storage: Hitachi 1TB Serial ATA HD 1600MHz 7200/32MB/SATA-3G Cooling: Corsair Hydro H50 CPU Liquid Cooler Case: Corsair Obsidian 800D Full Tower Case Power Supply: Corsair HX1000W 1000W Modular Power Supply Steps I have taken to narrow down the problem: Restarted the computer. - No change Changed USB port the Hub was connected to on the CPU. - No change Removed all devices from USB Hub and connected directly to CPU. - No change Used a different USB keyboard both in USB Hub and directly to CPU. - No change Disconnected and reconnected all cables. - No change Disassembled the Tower and determined if the USB headers were firmly connected. - No change Checked device manager for errors. Checked all USB devices. - Nothing flagged After an hour of frustration trying to narrow down the problem it appeared to disappear. But I am torn between it being a Mobo problem or an OS problem. Is there anything else I can do to narrow down the problem before a reformat and then eventually exchanging the Mobo?

  Read the article

• Limited connections to Ubuntu 12.04 server

  - by Luis M. Valenzuela

  I'm having a weird problem with my server. The server is inside my network, connected to a 3com switch which is connected to the router that handles the internet connection. The main purpose of the server is to host a php application. What's happening is that user 1 to 15 in the private network have no problems connecting to the server, when user 16 tries to connect a time out comes out and is unable to connect to the server. It's not just to the php application, but to any service from the server. When the 15 users are using the application, the server doesn't even answer to ping. I haven't set any special limit in Apache's ini file or MySql and the firewall is being turned off because the server is only to give service to the internal network. Is there a parameter in any of the network's card conf. files that might me causing this ? Or should I suspect from the router's or switches configuration ? UPDATE. Tomorrow, I'm gonna do some test on the server modifying two kernel params in : /etc/sysctl.conf The settings are: net.core.somaxconn which has the limit on simultaneous network connections to the server and kernel.shmmax which controls the amount of memory the system can use for managing connections.

  Read the article

• Performance decrease in every game and application

  - by Márk Vincze

  When I start a game, initially it runs smoothly, but after a couple of minutes, the performance gradually decreases to the point of being unplayable (1-2 FPS). The sound also starts to lag at this point. This does not happen every time I start my PC, usually exiting the game, rebooting, then starting the game again solves the problem, and I can play with perfect FPS for as long as I want. I could not find any deterministic reason when this happens and when doesn't. It happens in every game I tried (SWTOR, Diablo 3, Skyrim), and not even games, but simple applications like a browser or the Control Panel can get unusably slow. This is a brand new PC I bought three months ago, and this problem occurs since the first day I've been using it. Could you provide any advice how to further diagnose the problem? I tried to reinstall Windows, and tried different video card drivers, but it did not help. It would be important to know whether this is a hardware or software problem, because I can use the warranty if it is a hardware issue. (I did not want to return the PC yet, because I can't reproduce the issue deterministically.) Spec of the pc: Motherboard: ASROCK H61M-HVS CPU: INTEL Core i3-2120 3.30GHz 1155 BOX Memory: KINGMAX 4096MB DDR3 1333MHz KIT Video card: GIGABYTE GV-R685OC-1GD HD6850 1GB GDDR5 PCIE HDD: SEAGATE 500GB Barracuda 7200rpm 16MB SATA3 ST500DM002 I am using Windows 7 64 bit. Thanks a lot in advance!

  Read the article

• Configuring Vmware virtual machines to run under different IPs and PC specs

  - by Alex

  Right now I'm using a simple VmWare virtual machine with preinstalled Win 7. The IP is assigned automatically (it's the same as main OS IP). Is it possible to create several virtual machines that have different hardware specifications and different IP addresses? Here is what I mean regarding these issues: Specs: Certainly, you can easily change some specifications in the Settings menu (RAM size, HDD size), but what about advanced settings? For example: advanced settings for the Processor: is it AMD (2500+,4000+, etc.. ) or Intel (core 2, Pentium, etc..) Ram - is it Corsair 4 Gb 1333 Mhz or Kingston 2 x 2 Gb 866Mhz or something else? Hdd - Is it Seagate Barracuda 80 gb 5400 Rpm or is it Samsung 500Gb 7200 Rpm or some random SSD? Programs that work under a Virtual Machine shouldn't have a clue if that's a VmWare or not. IPs: Every program that's launched under main OS use the real IP: 93.56.xx.xx All programs that are launched under virtual machine A use IP 1: 74.78.xx.xx All programs that are launched under virtual machine B use IP 2: 84.159.xx.xx I believe that you have to use either VPN or Proxy to solve this problem. The Sum Up: The idea is to create 2-3 independent virtual machines with different hardware specifications and IP addresses. Programs that work under a certain Virtual Machine shouldn't have a clue if that's a VmWare or the real PC. Any ideas/tips or experience regarding configuration will be appreciated!

  Read the article

• Advice on Computer Specs for overall development/general use machine

  - by Ender

  At the moment I am restricted to a laptop with 512MB of RAM, a 120GB HDD and a 1.5GHz Intel processor for all my development and general browsing needs, and as you can probably tell using it for anything modern is a painful experience. As a result I've decided to buy myself a new desktop computer, one that will stand the test of time and one that can be upgraded easily. Rather than build the machine myself I've decided to go through Dell as I've had good experiences with them when purchasing computers for my family. I've had my eye on this as it's got a good amount of RAM, has a decent-rated processor and isn't priced too badly. http://www1.euro.dell.com/uk/en/home/Desktops/inspiron-580/pd.aspx?refid=inspiron-580&s=dhs&cs=ukepp1&~oid=uk~en~20211~inspiron-580_d005827~~ Intel® Core™ i5 Processor 750 (2.66GHz, 8MB) Genuine Windows® 7 Home Premium 64bit - English Display Not Included ATI Radeon™ HD 5450 1GB DDR3 graphics 6144MB Dual Channel DDR3 [3x2048] Memory 1TB (7200rpm) SATA Hard Drive DVD +/- RW Drive (read/write CD & DVD) with DVD Burn software 1 year of coverage included with your PC McAfee® Security Centre - 15 Month Protection - English After the pain of using a slow laptop for all this time the main thing I want is speed. I may look to play a couple of basic games on it, nothing too powerful. Obviously I'll be doing some development on it too so it'll have to be able to handle the latest IDE's and Database tools like SQL Server pretty quickly. Finally, should I ever need to improve it I'd like to be able to add more RAM and change some of the parts. I wouldn't have thought this would be a problem but a few people I've spoken to have said that the amount of RAM the motherboard can handle isn't that great. Is this true? How long can I expect to be using this computer before it's too slow? Thanks in advance for the help.

  Read the article

• Troubleshooting an overheating CPU

  - by Jeff Fry

  I & my father just recently put together a new PC. Specs below. From the very beginning, on boot it will often complain that the CPU is too hot. If I sit in BIOS and watch the CPU, it'll drop back down from red to blue (<72C), at which point I've tended to just boot into Windows...and haven't had any problems. In fact, I've played a couple hours straight of Skyrim at max settings, and not had any visible issues. That said, I've occasionally walked away & come back to find that it's crashed. Yesterday, it crashed (while idle) twice in 12 hours, which shifted the balance from busy-with-life to nervous-I'm-about-to-melt-something. I just installed Core Temp which is showing my 4 cores fluxuating between 70-98C. I'm guessing at this point that the CPU fan may be incorrectly installed or defective. My first thought is to either (a) add water cooling (which the case supports) and / or (b) replace the CPU fan with an after-market one. That said, I'm very open to suggestions. A note, while I certainly don't want to burn money here, I have a baby coming any day now and am still unpacking from a recent move so if I have a choice between an option that costs money and another that takes a while...I'll happily spend a bit extra. Side question: Should I be nervous to even have this on at this point? Let me know if there's something useful I could add to my report. Otherwise, I'm looking forward to your suggestions! Thanks. CPU Intel i7-2600 CPU w/ stock fan Other HW ASUS P8Z68-V Pro motherboard 64G SSD boot drive 4 older SATA HDs GIGABYTE ATI Radeon HD6950 1 GB DDR5 8G Kingston T1 Series RAM Corsair 650W Gold Certified power supply Antec P280 case

  Read the article

• Could hybrid SSD + HDD be made with fixed internal partitions?

  - by Aaron

  I was pretty close to getting Seagate's Momentus XT but have been scared off by the many problems reported on forums and feedback sites, especially in Mac Book Pros. So I'm waiting for mk 2 with some extra flash and better reliablilty I'm assuming will come out this year. What would suit me better though is a 32+500 hybrid drive where I have more control over what is on the flash drive and what is on the disk drive. So there are 2 physical partitions within the one 2.5" hard drive enclosure which use different media internally (32GB for core files and 500GB for data and multimedia). The partitions would be locked so they can't be changed. - Or even better, the disk driver just makes them appear as two disks to the OS that share the same bus... Perhaps it's ok if the bios just sees the first drive until the OS is loaded. Is either of it technically possible? Obviously difficult to market outside of the enthusiast market. The SSD memory modules can be pretty small right, so they could even make them a card that plugs into a secondary connection on the enclosure. That would be good for computer builders as well as for upgrading and recoverability. Then future operating systems could recognise these system SSD drives and automatically install the OS + swap files on it. While placing document libraries on the larger data drive. While in the longer term HDD will probably disapear there will always be a trade off between speed, storage size and expense.

  Read the article

• High data on recv-q buffer and thread lock on java.io.BufferedInputStream in linux

  - by Sagar Patel

  We have a java application running on linux (ubuntu server). We have been facing high recv-q problem since quite some time. Application gets hang and does not read data from socket every few hours. In thread dump, we have found below stack trace. "Receiver-146" daemon prio=10 tid=0x00007fb3fc010000 nid=0x7642 runnable [0x00007fb5906c5000] java.lang.Thread.State: RUNNABLE at java.net.SocketInputStream. socketRead0(Native Method) at java.net.SocketInputStream.read(SocketInputStream.java:150) at java.net.SocketInputStream.read(SocketInputStream.java:121) at java.io.BufferedInputStream.fill(BufferedInputStream.java:235) at java.io.BufferedInputStream.read1(BufferedInputStream.java:275) at java.io.BufferedInputStream.read(BufferedInputStream.java:334) - locked <0x00000007688f1ff0> (a java.io.BufferedInputStream) at org.smpp.TCPIPConnection.receive(TCPIPConnection.java:413) at org.smpp.ReceiverBase.receivePDUFromConnection(ReceiverBase.java:197) at org.smpp.Receiver.receiveAsync(Receiver.java:351) at org.smpp.ReceiverBase.process(ReceiverBase.java:96) at org.smpp.util.ProcessingThread.run(ProcessingThread.java:199) at java.lang.Thread.run(Thread.java:722) We are not able to trace the exact reason behind this? Kindly help. We are using 16 core machine and load on the system is around 30-40 at the time of issue. We use command ss dst <ip> to find out recv-q. Recently we have been facing issues with recv-q size getting hung, were in receive buffer gets stuck at some point of time. But recvQ size is not decreasing and as a result we are losing a lot of hits from the other side, our application is not accepting any data.

  Read the article

• On linux, what does it mean when a directory has size 0 instead of 4096?

  - by kdt

  Here's a strange thing I haven't seen before -- a directory whose size is reported by ls as 0 instead of 4096, and I can't create any files within it. # ls -ld lib home drwxr-xr-x. 2 root root 0 Feb 7 03:10 home <-- it has zero size dr-xr-xr-x. 11 root root 4096 Feb 4 09:28 lib # touch home/foo touch: cannot touch `home/foo': No such file or directory <-- and I can't create files in it # rm home rm: cannot remove `home': Is a directory <-- look, it really is a dir So what does it mean for a directory to have size 0 instead of 4096? Filesystem is ext4 on fedora core 14. The output of mount is: /dev/mapper/vg_dev-lv_root on / type ext4 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw,rootcontext="system_u:object_r:tmpfs_t:s0") /dev/vda1 on /boot type ext4 (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) Output of du -s /home: 0 /home Output of stat /home: File: `/home' Size: 0 Blocks: 0 IO Block: 1024 directory Device: 15h/21d Inode: 34913 Links: 2 Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root) Access: 2011-02-07 03:45:46.188995765 -0800 Modify: 2011-02-07 03:11:59.980995019 -0800 Change: 2011-02-06 07:58:45.874995002 -0800

  Read the article

• Mac OS X in Virtualbox says "You need to restart your computer"

  - by humoeba

  I've been trying to figure out for the past week how to get Snow Leopard reliably running in a VM. Right now I am using VirtualBox, and it runs fine for a while, but every once in a while (happened 3 times in the last few hours) I get the "You need to restart your computer" message. Unfortunately, it hasn't even lasted long enough to finish installing the operating system yet. I first tried VMWare, which was a pain to set up. I got it running ok, operating system installed, with the guest tools. Every once in a while though, it just stops running. I click inside the VM, and there's no mouse. It doesn't respond to keyboard input either. I have to reset the VM to get a response. I'm wondering if this is the same error. This happens with both Workstation and Player. Here is the tutorial I used for VirtualBox: http://www.sysprobs.com/iboot-loader-virtualbox-install-snow-leopard Here's the tutorial I used for VMWare: http://bobhood.wordpress.com/2009/12/18/welcome-to-snow-leopard-mac-os-x-10-6-and-vmware-workstation-7/ I'm using an iso for Mac OS X 10.6.3. I have an HP Pavilion dm4 with an Intel Core i7 M640 running Windows 7; VT is turned on. Using VirtualBox 4.0.4 and VMWare Workstation 7.0.1 and VMWare Player 3.0.1 Does anyone know what might be causing this error or how I can fix it? Thanks.

  Read the article

• GUI interfaces to ATI card behave weirdly out of the box and after updates.

  - by jdk

  My Lenovo W500 came with an ATI Mobility FireGL V5700 and both the Catalyst control center software and Vista display manager display four monitors. What's really annoying is the behaviour. My two active displays (laptop display + my external monitor) are always #s 3 and 4 respectively which doesn't make sense. This is out of the box. Additionally dragging & dropping is jumpy and displays #1 and 2 (always inactive because they don't exist to the software) are often preventing me from dragging #3 and 4 to the rightmost side. They also auto-snap to weird positions and certain sensible positions like position one directly over top of the other are not possible. The exact same annoyances are present when using the Windows Display manager too. In other words the interface is crap and I'm looking for a fix that's not wishing I had gone with nVidia instead. I've updated drivers, and Catalyst control centre. Have latest Windows and AMD/ATI updates. Any thoughts? Graphics Software Driver Packaging Version 8.563.2.1-090401a-079160C-Lenovo Provider ATI Technologies Inc. 2D Driver Version 7.01.01.849 2D Driver File Path /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4D36E968-E325-11CE-BFC1-08002BE10318}/0001 Direct3D Version 7.14.10.0630 OpenGL Version 6.14.10.8306 Catalyst® Control Center Version 2009.0401.1328.22301 Graphics Hardware Primary Adapter Graphics Card Manufacturer Powered by ATI Graphics Chipset ATI Mobility FireGL V5700 Device ID 9591 Vendor 1002 Subsystem ID 2126 Subsystem Vendor ID 17AA Graphics Bus Capability PCI Express 2.0 Maximum Bus Setting PCI Express 2.0 x16 BIOS Version 010.088.000.021 BIOS Part Number BK-ATI VER010.088.000.021.034663 BIOS Date 2009/09/30 Memory Size 512 MB Memory Type DDR3 Core Clock in MHz 600 MHz Memory Clock in MHz 700 MHz

  Read the article

• Poor performance on IIS7, only on Windows Server 2008, fine on Windows 7?

  - by user32005

  Hi, I'm new to IIS7 but have experience with other versions. I've been working on an application that works great in a dev environment (as always) but when I push it to a windows server 2008/IIS7 box performance takes a noticeable hit. The dev environment is Windows7/IIS7. The configuration in IIS is the same on the dev box as the server. I've tried all sorts of things to try and find a reason for this but I cant come to any conclusion. I've ruled out database problems on the live box as all data is cached after the first request. I've confirmed this to be true and made sure there is no additional database traffic. I've ruled out network issues with a combination of monitoring requests with fiddler and local debugging on the server. Whenever the code runs on the server there seems to be a performance issue. The server: Intel Core 2 Quad CPU Q6600 @ 2.40ghz with 2gb RAM. I know this is not fantastic but I was expecting it to at least perform as well as my dev environment (which is running much more on a lower spec). The CPU using peaks at under 60%, and memory usage is less than half of the available. I've enabled failed request tracing and most of the time is spent in a custom HttpModule, this module works to handle every request, I cant get any more detail as to what within the module may be causing the problem. Any ideas, I've been pulling my hair out for days now. Thanks

  Read the article

• Mysqld shutting down by itself

  - by AJ Naidas

  I'm running a Wordpress Blog that gets medium-high traffic. It is hosted in an Ubuntu Server 2GB Memory 2 Core Processor 40GB SSD Disk, 3TB Transfer. The problem is that MySQL shuts down by itself after an hour or two. I had to restart mysql each and every time this happens. I checked the logs and this is what I found: 140612 6:48:14 [Warning] Using unique option prefix myisam-recover instead of myisam-recover-options is deprecated and will be removed in a future release. Please use the full name instead. 140612 6:48:14 [Note] Plugin 'FEDERATED' is disabled. 140612 6:48:14 InnoDB: The InnoDB memory heap is disabled 140612 6:48:14 InnoDB: Mutexes and rw_locks use GCC atomic builtins 140612 6:48:14 InnoDB: Compressed tables use zlib 1.2.3.4 140612 6:48:14 InnoDB: Initializing buffer pool, size = 1.4G InnoDB: mmap(1502412800 bytes) failed; errno 12 140612 6:48:14 InnoDB: Completed initialization of buffer pool 140612 6:48:14 InnoDB: Fatal error: cannot allocate memory for the buffer pool 140612 6:48:14 [ERROR] Plugin 'InnoDB' init function returned error. 140612 6:48:14 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 140612 6:48:14 [ERROR] Unknown/unsupported storage engine: InnoDB 140612 6:48:14 [ERROR] Aborting 140612 6:48:14 [Note] /usr/sbin/mysqld: Shutdown complete judging by this line: 140612 6:48:14 InnoDB: Fatal error: cannot allocate memory for the buffer pool I suspect that this is a memory problem, but I would like to hear from the experts here before I conclude. Is this a lack of memory problem? Do you think the value of max_connections in my.cnf (currently 100) is a potential cause and needs increasing? TIA.

  Read the article

• Vyatta masquerade out bridge interface

  - by miquella

  We have set up a Vyatta Core 6.1 gateway on our network with three interfaces: eth0 - 1.1.1.1 - public gateway/router IP (to public upstream router) eth1 - 2.2.2.1/24 - public subnet (connected to a second firewall 2.2.2.2) eth2 - 10.10.0.1/24 - private subnet Our ISP provided the 1.1.1.1 address for us to use as our gateway. The 2.2.2.1 address is so the other firewall (2.2.2.2) can communicate to this gateway which then routes the traffic out through the eth0 interface. Here is our current configuration: interfaces { bridge br100 { address 2.2.2.1/24 } ethernet eth0 { address 1.1.1.1/30 vif 100 { bridge-group { bridge br100 } } } ethernet eth1 { bridge-group { bridge br100 } } ethernet eth2 { address 10.10.0.1/24 } loopback lo { } } service { nat { rule 100 { outbound-interface eth0 source { address 10.10.0.1/24 } type masquerade } } } With this configuration, it routes everything, but the source address after masquerading is 1.1.1.1, which is correct, because that's the interface it's bound to. But because of some of our requirements here, we need it to source from the 2.2.2.1 address instead (what's the point of paying for a class C public subnet if the only address we can send from is our gateway!?). I've tried binding to br100 instead of eth0, but it doesn't seem to route anything if I do that. I imagine I'm just missing something simple. Any thoughts?

  Read the article

• Disappeared graphics card

  - by lenovo user

  I have a Lenovo T520 with two graphics cards, an nVidia quadro and an intel graphics card. I'm running a Ubuntu and Windows 7 dual boot. I can no longer find any trace of my intel graphics card. In my linux boot: > lspci | grep VGA > 01:00.0 VGA compatible controller: nVidia Corporation GF106 [Quadro 2000M] (rev a1) In Windows in control panel display- advanced settings, I only see the NVIDIA Quadro 2000M. In the BIOS there is no mention of the intel graphics card, no where I can find to try and turn it on or off. I thought I was going crazy, but then I found a post I made on ask ubuntu I made 3 months ago where I listed the output of lspci on this same machine: lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: nVidia Corporation GF106 [Quadro 2000M] (rev a1) What is going on? How could my intel graphics card have been disabled or turned off somehow without my knowledge? I've been in the BIOS 3 times now, each time convinced the last time I must have missed something, but I always find nothing. Am I missing something there? Could a thief have opened my computer and stolen my graphics card?

  Read the article

• System Center 2012 VMM UI is very slow

  - by Grant

  I've recently setup system center 2012 a new server 2008 r2 server which I'm using for virtual machines. Everything seems to be working fine, and the virtual machines are nice and fast. But the Virtual Machine Manager interface is always excruciatingly slow. Sometimes taking up to 15 seconds moving between screens. It's very frustrating trying to use it when a task that just involves a couple clicks ends up taking several minutes. Pages that have a lot of form fields seem to take the longest to load - such as the page to change hardware settings of a virtual machine. Is this just normal performance for VMM? If not, where can I look to find what is slowing it down. Nothing else on the system seems to suffer. I can load and use Hyper-V manager with no noticable slowness. Even programs like event viewer that are usually rather slow seem to load fairly fast. Only the system center programs seem slow. Server is a Dell R710, 2x16 core opteron 6274 processors, 96GB RAM. OS drive is 2x500GB 7.2k RPM SAS drives in RAID1 (opted for the less expensive 7.2k drives since pretty much everything is stored on the SAN). Am I just being impatient? Does anyone else use VMM 2012 and find it slow?

  Read the article

• less maximum buffer size?

  - by Tyzoid

  I was messing around with my system and found a novel way to use up memory, but it seems that the less command only holds a limited amount of data before stopping/killing the command. To test, run (careful! uses lots of system memory very fast!) $ cat /dev/zero | less From my testing, it looks like the command is killed after less reaches 2.5 gigabytes of memory, but I can't find anything in the man page that suggests that it would limit it in such a way. In addition, I couldn't find any documentation via the google on the subject. Any light to this quite surprising discovery would be great! System Information: Quad core intel i7, 8gb ram. $ uname -a Linux Tyler-Work 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux $ less --version less 458 (GNU regular expressions) Copyright (C) 1984-2012 Mark Nudelman less comes with NO WARRANTY, to the extent permitted by law. For information about the terms of redistribution, see the file named README in the less distribution. Homepage: http://www.greenwoodsoftware.com/less $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04 LTS Release: 14.04 Codename: trusty

  Read the article

• Gaming blew fuse: how to overcome?

  - by George Tomlinson

  I've been gaming for a while now. When playing certain games this PC goes into overdrive. The fan/fans start/s to sound like a jet engine it/they get/s so busy. Also I have smelt burning when this has happened. The fuse blew on the 4 socket adapter I was using recently. On the following thread someone said this could be due to the PSU not being strong enough to handle the load, in what it seems could be a related issue someone had, although the person who posted this question did say that blowing a fan on their PC stopped it crashing in that case: http://www.tomshardware.co.uk/answers/id-2047543/gtx-650-overheating-issue.html. This is exactly what they said: Your GPU isn't overheating. 70+ before it would shutdown and cause a restart. Make sure your PSU is strong enough to handle your new system at load and possibly run Memtest to check your RAM (although not BSOD'ing and just shutting down points to the PSU). This (the PSU part) makes more sense to me than it being to do with dust etc, since it seems a more plausible explanation of why the fuse blew. The PC has no problems except when playing certain games: i.e. TERA Rising and WoW with add-ons (I think WoW is ok as long as I don't have more than 1 add-on (Healers Have To Die)). I'm just wondering if anyone knows or can suggest what I might be able to do to be able to play these games without this problem occurring. The PC's spec is this: Display: NVIDIA GeForce GTX 650 8GB RAM (6 available) Processor: AMD FX (tm) - 8120 Eight-Core Processor - 3.1 GHz, 4 Cores, 8 Logical Processors I have read on another post that forcing vsync in the Nvidia Control Panel helped with what seems could be a similar problem, so I plan to see if that solves it, God permitting.

  Read the article

< Previous Page | 410 411 412 413 414 415 416 417 418 419 420 421  | Next Page >