Search Results

Search found 14975 results on 599 pages for 'os x'.

Page 414/599 | < Previous Page | 410 411 412 413 414 415 416 417 418 419 420 421  | Next Page >

• I can't get my Macbook Pro to print to an IP addressable printer

  - by Pieter

  Running Macbook Pro OS X 10.6.3 Accessing an HP OfficeJet 5610 plugged in the USB port of a US Robotics router. I tried several combinations of: Protocol: Internet Printing Protocol (IPP) Line Printer Daemon (LPD) HP JetDirect (socket) Address: http://192.168.1.10:1631/printers/HP5610 192.168.1.10:1631/printers/HP5610 http://192.168.1.10:1631 192.168.1.10:1631 192.168.1.10 ... Driver: HP OfficeJet 5600 Series Whenever I try to print, it fails while saying "connected to printer" or "Printer is busy...zill try again in X seconds" Both Windows 7 and Windows XP computers on the network can successfully access this printer, identifying it as "HP5610 on http://192.168.1.10:1631/" I tried clearing all tasks and printers (ctrl-click in the menu), and resetting it to (socket, http://192.168.1.10:1631/printers/HP5610, HP5600 series) but to no success.

  Read the article

• External Full HD monitor and Virtual Desktop Size

  - by Stefan

  I have two FullHD monitors attached to my ATI graphics card [2]. The resolution of both of them is detected properly without any modifications to /etc/X11/xorg.conf. I can run both of them in clone mode. However, when I try to run them next to each other, I got the following error: The selected configuration for displays could not be applied. If tried to fix this according to [1]. My xorg.conf now looks like this: Section "Module" Load "glx" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" # The 1088 is the smallest multiple of 32 >= 1088 # see manpages Virtual 1920 1088 EndSubSection EndSection This does not seem to be parsed properly. After restarting X, I cannot set resolutions beyond 1600 or so any more. /var/log/Xorg.0.log gives: [ 15.676] (II) fglrx(0): Not using mode "1920x1080" (width too large for virtual size) [ 15.676] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size) Are my modifications syntactically incorrect? According to the man page, it should be fine. Any ideas? OS: Ubuntu 11.10 64bit [1] http://askubuntu.com/a/75546/5023 [2] 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series]

  Read the article

• Connecting to localhost with smartphone: possible?

  - by Arturas Molcanovas

  I am currently developing a mobile PHP project on localhost (or, to be more precise, a locally hosted website reachable at http://azgoth/) on my desktop computer and wish to check out how the design looks on my phone's various browsers, however, since the project's actually in my computer rather than the public net, I am unable to do so. Both my Desktop computer and smartphone connect to the internet via the same router, so I wondered, would it be possible to somehow make http://azgoth/ accessible to my smartphone in a similar way that my desktop computer accesses it, without making it public for everyone to see? OS: Windows XP SP 3 Service: Apache HTTPD Router: D-Link DIR-300 FTP Directory

  Read the article

• Can I install Win 7 Pro with a Win 7 Home Premium disc?

  - by SeanJA

  So I got the 64bit Win 7 Pro disc from the Ultimate steal for cheap enough... but I found out that some stuff that I want to run (games mostly... since that is the only reason I keep Windows around...) did not do too well on the 64bit OS. So I have borrowed my friend's install disc, but it turns out that his is only Home Premium rather than Pro which I have a serial for. Can I still just run through the Home Premium install and use my Pro serial number (seems like I should be able to with the whole 'any time upgrade' deal)? Or do I have to go and find a 32bit pro disc to do the install? Are there any hoops that I have to jump through?

  Read the article

• 504 Gateway Time-out after php fatal error

  - by tiagojsag

  I'm using nginx and php-fpm to develop a symfony2 based website, under ubuntu 12.10 (yes, I know I'm using a beta OS). Everything was working out fine until, due to an error on my code, I called an unexisting function, and got the following: Fatal error: Call to a member function (....) This isn't a problem (it's a bug in my code, easily fixable), but after this, no other page loads. My browser just keeps trying to load the page from the webserver, until nginx timeouts (after +- 30s, which should be some default timeout) and returns: 504 Gateway Time-out Restarting php-fpm solves the issue. Nginx logs show a timeout message, and nothing appears on php-fpm logs, even if I set them to debug level. I tried switching from fpm to fastcgi, and the same thing happens. I've looked around, but all similar error are related to big requests/file handling, which isn't the case. All the pages on my website load in a few seconds, even under development conditions (no caching, etc).

  Read the article

• Eris Update to 2.1 &ndash; No Problems

  - by Bunch

  I updated my Eris to Android’s 2.1 OS last night and everything went pretty well. I had wanted to update the phone mainly for two reasons. The first was to have the Navigation feature of the Google Maps application and to make YouTube work again. YouTube used to work on the phone and then stopped a few weeks ago. But before I started I looked around various forums and blogs to see what doom and gloom folks were talking about the update. Based on what I read and some common sense I used the following steps: Made sure there was a good charge on the phone. Connected to our WiFi (the download is about 77 megs, not very 3G friendly). Checked that the contacts were synced with the GMail account. As a precaution I copied off any music and pictures from the SD card to my laptop. Started the update process and waited for the download and installation to complete. It took maybe 30 minutes to do everything. After the update I re-synced the contacts and tested out the phone (it does make calls after all). I did need to download the text to speech application to get the Maps Navigation to work but that was easy enough since the application prompted me to download it. And now the YouTube application works again. Technorati Tags: Android

  Read the article

• How to backup MySQL (mysqldump) when Memcached installed?

  - by cewebugil

  The server OS is CentOS, with Memcached installed Before Memcached installed, I use mysqldump -u root -p --lock-tables --add-locks --disable-keys --skip-extended-insert --quick wcraze > /var/backup/backup.sql But now, Memcached has been installed. According to Wikipedia; When the table is full, subsequent inserts cause older data to be purged in least recently used (LRU) order. This means new data entry is not directly saved in MySQL, but saved in Memcached instead, until limit_maxbytes is full, the least accessed data will be saved in MySQL. This means, some data is not in the MySQL but in Memcached. So, when backup, the new entry is not in the backup data What is the right way to backup?

  Read the article

• Can KVM roll back changes to Virtual Disks automatically?

  - by Cygon

  I'm currently using VirtualBox on my Linux server to run a small Windows guest OS. I've configured its main virtual hard drive as what VBox calls "Immutable" - meaning that any changes to it are written into a differencing image that is discarded when the system reboots. Can KVM do something similar? I've read about snapshots via "savevm", "loadvm" but I believe that's saved states, not differencing images. What I ultimately want is a VM with two drives: one reverts on each reboot, one keeps its changes. Ideally, the unchangeable drive image should be stored with only read access granted to the user running KVM.

  Read the article

• Installation causing broken packages

  - by AWE

  Here I come I am so determined to use Ubuntu that I paid a professional to install it for me (dualboot). When I got it I got a lot of things from the software center. Skype did not have a download button so I googled it and Ubuntu help told me to do this: sudo add-apt-repository "deb http://archive.canonical.com/ $(lsb_release -sc) partner" and then this: sudo apt-get update && sudo apt-get install skype The terminal told me "that this is potentially harmful..." but I thought it was Ubuntu language meaning "are you sure?" Now items cannot be installed or removed until the package catalog is repaired, so I want to repair it but the package operation fails. "sudo aptitude -f install" - command not found Synaptic package manager tells me that I have two broken packages, libc6 and libc6-dev but doesn't help, only makes life complicated. What the *#$%&!!! I don't want to be forced to become a computer scientist just to be able to use a free source os. P.s. the sound stopped working

  Read the article

• Is there a way reinstall a fresh Adobe trial on Mac?

  - by Moshe

  I was wondering if it is easier to fool the Adobe Installer into giving a second and third etc 30 day trial of various product on Mac OS X 10.5 than it is on Windows. Is this doable? How so. I am expecting to get a PC version of CS4 soon possibly through a legit source, this is just for the interim. Edit : I am not a big fan of pirating, but as I stated above, I expecting a legit copy soon. Why the downvotes?

  Read the article

• Shrink system volume, create new partition, & enlarge current partitions w/o losing data?

  - by studiohack

  My machine has a 300 GB hard drive. I'm planning to reinstall Windows 7 on this machine soon. It has three partitions: a System partition, and two equal data partitions for particular types of data (music, photos, docs, etc). These data partitions are too small for the data they hold, and the system partition is large enough to be shrunk. I want to create four partitions in preparation for the fresh reinstall, a System partition, and three data partitions of varying sizes (40, 50, & 60 GB respectively). My question: Can I shrink the System volume, create another partition, and make the existing two data partitions bigger without losing any data that is currently on the hard drive? Or is it better to format the whole thing, and create partitions after (thus removing the current OS) with a partitioning tool booting from CD? Can I reformat and create partitions with the Windows 7 set up DVD?

  Read the article

• Microsoft releases Visual Studio 2010 SP1

  - by brian_ritchie

  Microsoft has been beta testing SP1 since December of last year.  Today, it was released to MSDN subscribers and will be available for public download on March 10, 2011.The service pack includes a slew of fixes, and a number of new features: Silverlight 4 supportBasic Unit Testing support for the .NET Framework 3.5Performance Wizard for SilverlightIntelliTrace for 64-bit and SharePointIIS Express supportSQL CE 4 supportRazor supportHTML5 and CSS3 support (IntelliSense and validation)WCF RIA Services V1 SP1 includedVisual Basic Runtime embeddingALM Improvements Of all the improvements, IIS Express probably has the largest impact on web developer productivity.  According to Scott Gu, it provides the following:It’s lightweight and easy to install (less than 10Mb download and a super quick install)It does not require an administrator account to run/debug applications from Visual Studio It enables a full web-server feature set – including SSL, URL Rewrite, Media Support, and all other IIS 7.x modules It supports and enables the same extensibility model and web.config file settings that IIS 7.x support It can be installed side-by-side with the full IIS web server as well as the ASP.NET Development Server (they do not conflict at all) It works on Windows XP and higher operating systems – giving you a full IIS 7.x developer feature-set on all OS platforms IIS Express (like the ASP.NET Development Server) can be quickly launched to run a site from a directory on disk.  It does not require any registration/configuration steps. This makes it really easy to launch and run for development scenarios.Good stuff indeed.  This will make our lives much easier.  Thanks Microsoft...we're feeling the love!  

  Read the article

• seamless mode remote desktop connection from linux to windows

  - by mateusz.fiolka

  I am a programmer using Linux as my main OS, however sometimes I need to use windows (ie, office, ea). I'm running qemu with kvm to access the windows "machine". I would like to achieve something that is described here: https://help.ubuntu.com/community/SeamlessVirtualization (It means I would be able to run chosen applications on Windows and then display them locally on Linux as separate windows achieving good desktop integration). However seamless rdp is buggy and doesn't work on my machine (probably because I'm using a tiling window manager and a 64bit system). Are you aware of any other solution then rdp seamless mode? I would prefer to still use quemu because it uses cpu hardware virtualization, so different protocol/client combination would be preferable.

  Read the article

• When copying VM filesystem over netcat, dd copies double the disk size

  - by JivanAmara

  I'm attempting to copy the disk of a working headless virtualbox VM (VM1) on one server to a new VM (VM2) on a vCloud server. I don't have access to the host of VM2. The OS is Windows Server 2003 (32-bit) I start both VMs with a live Knoppix image. I run 'nc -l | dd of=/dev/sda bs=512' on VM2 I run 'dd if=/dev/sda bs=512 | nc ' on VM1 I previously did this with another windows VM and it worked fine. VM1 has a disk of size ~70GB (verified with fdisk); however, the amount of data dd reports read/written is ~139GB. Of course the target machine doesn't work properly. I get a Windows splash screen, then blue error screen with general 'system not working' information. I'm at a loss what could cause this. Any ideas?

  Read the article

• Create option to load Ubuntu or Windows 7 at start-up

  - by AXK

  We have a new Dell Optiplex 790 desktop with Windows 7 and just installed Ubuntu 12.04 on it using a USB stick that was configured as a boot drive. We created a new partition for Ubuntu during installation using the partition editor that comes up during installation. Everything seems to have gone fine with the installation except that, unexpectedly, there is no option to boot up Ubuntu when the computer is started. We just start the computer and Windows starts up with no option to ever start Ubuntu. The only way we have gotten Ubuntu to start is by putting the USB stick used for installation back into the computer and having the computer boot from it. Then GRUB shows up and the Ubuntu OS that we installed starts up (rather than the live-CD version on the USB stick). Previous times we have installed Ubuntu, GRUB shows up when we start the computer and we can choose among the various OSes installed. Can anyone suggest what to do? We want to have the option to launch either Windows 7 or Ubuntu 12.04 when we start the computer, with the default being Windows 7. Right now there is no option and Windows 7 just starts the way it did before we installed Ubuntu. Note that if we hit F1 soon after starting the computer, we get some sort of Windows bootloader (not sure of exact name) but there is no option for Ubuntu; just Windows 7. Also note that if we hit the shift key soon after starting the computer, as some help pages have suggested, nothing happens (Windows 7 is loaded as usual). Thanks in advance!

  Read the article

• LVM mirroring VS RAID1

  - by syrenity

  Hi. Having learned a bit about LVM mirroring, I thought about replacing the current RAID-1 scheme I'm using to gain some flexibility. Problem is that according to what I found on the Internet, LVM is: 1) Slower then RAID-1, at least in reading (as only single volume being used for reading). 2) Non-reliable on power interrupts, and requires disk cache disabling for prevention of data loss. http://www.joshbryan.com/blog/2008/01/02/lvm2-mirrors-vs-md-raid-1/ Also it seems, at least to several setup guides I read (http://www.tcpdump.com/kb/os/linux/lvm-mirroring/intro.html), that one actually requires a 3rd disk for storing the LVM log. This makes the setup completely unusable on 2 disks installations, and lowers the amount of used mirror disks on higher amount of disks. Can anyone comment the above facts, and let me know his experience of using LVM mirroring? Thanks.

  Read the article

• How to change hybrid disk to basic disk in windows 7?

  - by Marco

  I created a partition E and then deleted the partition. After that I extended my partition C (where OS was installed) to take the space. My partition C became hybrid drive. My hp notebook does not have DVD rom and the notebook only came with an recovery image (I also have a paragon disc image). My computer has some problems now and I want to recover it by either the factory format or the paragon disc image. However, none of them works. I know it is because my disc has become hybrid disk. My question is how to fix the dynamic disk problem?

  Read the article

• How to create shared home directories across multiple computers?

  - by Joe D

  I know there are ways to share a folder across computers making it easy to move files. But I was wondering how one would setup a single login which lets you access the same files regardless of which machine you login on? What I would like is something similar to something you would see in a college campus where students login on machines in the lab and see their files regardless of which machine they use. I know there are server involved here. I have a need to create this on a smaller scale where we have a few computers available (and one of these could act as the server if needed and host the files) that every one shares. Note, the specific install of software might be different on each computer but the login and OS are the same. Since some computers have additional capability that our group members will need to use at rotating schedules (software licenses or hardware components, etc.). I have not done this before, so I would appreciate detailed instructions if possible or a reference to a guide that describes this. Thanks in advance.

  Read the article

• Why is Ubuntu One slow to sync in 11.10, either backup or any sub-folder contents?

  - by pst007x

  I have been trying to sync my documents folder of 1.4GB, it still hasn't worked and it has been syncing for a month. The top level syncs, files and folders in the Document folders, but contents of sub-folders just hang. (Gave up and stopped syncing this folder) However,I have tried using the backup facility in 11.10, to backup to Ubuntu One.... I upgraded my HDD space in Ubuntu One. It has been going now for 24hours-ish and only backed up what looks like a couple of percent. (By the way what an excellent idea to backup to Ubuntu One, if only we could get it to actually work! :-o) The odd thing is I can sync to drop box within hours, rather than months. This is bad, and has been an issue since Ubuntu One's release. I have reported this problem and there were promises in later releases this would be fixed, but it hasn't. Canonical cannot help either... I posted on several blogs, a lot of people have the same problem but no fixes. So do I use dropbox or another service, until it is sorted, as Ubuntu does not seem to see this as an issue, I think a fix will be a long time in coming. (However,I love the potential of Ubuntu One and the integration with the OS) Yes my internet speeds are fine, etc... :-) No firewall (sudo ufw status: STATUS: INACTIVE), No Proxy, etc NB: I have raised this as a separate question to others posted here, because my question relates to Ubuntu 11.10, though I have commented elsewhere for help. Plus my question also relates to deja-dup backup to Ubuntu One. Thanks

  Read the article

• Why am I seeing excessive disk activity when installing applications?

  - by Kev

  I'm running Windows 7 Ultimate 64 bit on a Dell Vostro 1720 with 8GB of RAM, 7200RPM Disk, 2.53 GHz Core2Duo (Windows 7 64 bit is a supported option and the laptop came with the OS pre-installed). I'm noticing some fairly excessive disk activity when running installers. For example the Visual Studio 2010 RC installer constantly accessed the disk for ~10 minutes. It was so excessive that I was unable to use the machine until this ceased. Today I installed Trillian Astra 4.1 for Windows (latest build from the website). Again when I ran the installer I was pretty much locked out of the machine until the disk activity calmed down. In both cases when I eventually managed to launch task manager I could see that the CPU was sitting at around 5% to 7% utilisation whilst this was going on. All other disk related activity is fine, the machine is snappy and applications launch without delay. It's just when I run an installer I see this odd behaviour. Why would this be?

  Read the article

• Leveraging NuGet as a central repository for PowerShell modules

  - by cibrax

  We have been working a lot lately with PowerShell as part of our star product at Tellago Studios, “Moesion”. One of the main features we provide in Moesion is the ability to execute PowerShell commands remotely in a given server using a web mobile interface (You can read more in my previous post about Moesion). One of the things we realized in all this time is that PowerShell lacks of a central repository where IT guys or we, the developers, can easily grab and reuse commands.  All the commands or modules are basically spread across multiple places or websites, like personal blogs, TechNet or CodePlex projects to name a few making the search of them very hard. You are usually limited to use your favorite search engine and copy what you find. In addition, there is not an easy way to reuse, extend or version these commands, which also limits any contribution that you could make to the community.  My friend Jose wrote a great post the other day about the importance of reusing PowerShell modules, and what is the mechanism to reuse them. Jose, however, based his post in a custom implementation using a GIT repository for storing the modules. We have NuGet in the .NET platform for sharing and reusing existing libraries or code, so why can’t just leverage it for reusing PowerShell modules as well ?. Some teams in Microsoft are using NuGet for distributing libraries and binaries so it would be a great thing for all of us if they also distribute the scripting interfaces in PowerShell using NuGet. This applies to the .NET OS community as well. In fact, it looks like Andrew Nurse had the same idea and implemented a project for this in BitBucket, PsGet.

  Read the article

• Is mumble safe (privacy wise)?

  - by AnonymousLurker

  When chatting on IRC, it is possible to leak data like OS, CPU type if the IRC client happens to leak it in VERSION string. Anybody doing /CTCP VERSION can see it. Same about timezone (/CTCP TIME). This can be mitigated by turning replies to CTCP queries off. Also, IP address is leaked to others (/whois nickname will show it if it's not cloaked). By analogy, does the mumble client expose such sensitive data to others that are connected to the same server? If it does, what are the ways to mitigate this?

  Read the article

• Need a good quality bitmap rotation algorithm for Android

  - by Lumis

  I am creating a kaleidoscopic effect on an android tablet. I am using the code below to rotate a slice of an image, but as you can see in the image when rotating a bitmap 60 degrees it distorts it quite a lot (red rectangles) – it is smudging the image! I have set dither and anti-alias flags but it does not help much. I think it is just not a very sophisticated bitmap rotation algorithm. canvas.save(); canvas.rotate(angle, screenW/2, screenH/2); canvas.drawBitmap(picSlice, screenW/2, screenH/2, pOutput); canvas.restore(); So I wonder if you can help me find a better way to rotate a bitmap. It does not have to be fast, because I intend to use a high quality rotation only when I want to save the screen to the SD card - I would redraw the screen in memory before saving. Do you know any comprehensible or replicable algorithm for bitmap rotation that I could programme or use as a library? Or any other suggestion? EDIT: The answers below made me think if Android OS had bilinear or bicubic interpolation option and after some search I found that it does have its own version of it called FilterBitmap. After applying it to my paint pOutput.setFilterBitmap(true); I get much better result

  Read the article

• java -version doesn't write to stdout?

  - by Zárate

  Hi there, Either I'm doing something silly or Sun is. How come something like: java -version > version.txt Still prints out to stdout and leaves version.txt empty? I'm checking out the exit code, and it's still 0, so is not that's writing to stderr. I need this because I'm building a test-environment tool and want to check if the version of Java is adequate, I was planning to catch that version output, but now I'm stuck. I'm on OS X Leopard, Java version 1.6.0_20. Any ideas? Cheers, Juan

  Read the article

• How do I usb tether my Cyanogen modded G1's internet connection to my Toshiba Tecra 8000 running Xubuntu?

  - by atticus

  I have usb-tethering enabled in my phone. It works fine with Vista. When I plug my phone into my Tecra 8000 laptop running Xubuntu, dmesg shows: "usb 1-1: new full speed USB device using uhci_hcd and address 8". I see that the OS has detected it as a storage device, but I can't get it to function correctly as a network device. /dev/us* shows no usb0, but it does show /dev/usbdev1.1_ep00 /dev/usbdev1.1_ep81 /dev/usbdev1.8_ep00 ... usbdev1.8_ep83 I could just use the wireless tether app for android, but I can't get my Netgear wg511 v2 (made in China) wireless card to work in this laptop either. But that's another post for later.

  Read the article

< Previous Page | 410 411 412 413 414 415 416 417 418 419 420 421  | Next Page >