Search Results

Search found 14443 results on 578 pages for 'virtual keyboard'.

Page 414/578 | < Previous Page | 410 411 412 413 414 415 416 417 418 419 420 421  | Next Page >

  • MySQL port 3306 became filtered when configured with Keepalived on Ubuntu server 12.04 lts

    - by Ludwig
    I'm configuring two load balancer (lb01 & lb02) with keepalived for my two mysql server (db01 & db02) with standard port 3306. There is virtual ip address (192.168.205.10) to access it also act as failover, but somehow the web server in the front can't access this mysql server using vip. Here is my config: Keepalived: Only the mysql part that i added here. LB01: virtual_server 192.168.205.10 3306 { delay_loop 6 lb_algo rr lb_kind DR protocol TCP real_server 192.168.205.4 3306 { weight 10 TCP_CHECK { connect_port 3306 connect_timeout 2 } } } LB02: virtual_server 192.168.205.10 3306 { delay_loop 6 lb_algo rr lb_kind DR protocol TCP real_server 192.168.205.6 3306 { weight 10 TCP_CHECK { connect_port 3306 connect_timeout 2 } } } I already comment out the "bind-address=127.0.0.1" part in both server my.cnf. Also, remove all the firewall prog from my ubuntu server (ufw or iptables). Any help? thanks.

    Read the article

  • tomcat dns forwarding to multiple applications

    - by basis vasis
    I recently installed business objects software on tomcat 6. I have 2 domains - domain1 and domain2. This software allows access to two of its applications via these URLS: ADDRESS:http://myservername.domain1:8080/BO/APP1 and ADDRESS:http://myservername.domain1:8080/BO/APP2. Instead of these urls, I would like the end users to access these apps via something like http://bobj.domain2.com:8080/BO/APP1 and http://bobj.domain2.com:8080/BO/APP2. I cannot figure out how to accomplish that. I have looked into the option of http redirect (not good because the destination address shows up in the address bar), domain forwarding (not sure if it would work with multiple applications and forwarding from one domain to another) and also using apache tomcat with mod_jk by using virtual hosts (not sure if it is possible when forwarding from one domain to a sub domain in another domain) ?? please advise as to what would be my best option and how to accomplish. thanks a bunch

    Read the article

  • Hyper-V cluster VS regular cluster

    - by Sasha
    We need to choice between Hyper-V and regular cluster technologies. What is the advantage and disadvantage of these approaches? Update: We have to physical servers and want to build reliably solution using cluster approach. We need to clustering our application and DB (MS SQL). We know that we can use: Regular Windows Cluster Service. Application and DB will be migrating from one node to other. Hyper-V Failover Cluster. Virtual machine will be migrating from one node to other. Combined variant. DB mirroring for MS SQL and Hyper-V for our application. We need to make a choice between this approach. So we need to know advantage and disadvantage of these approaches?

    Read the article

  • Where is the encfs volume key stored?

    - by Waldorf
    I am trying to use encfs in reverse mode. I understand that the passphase is used to encrypt a key which is then stored encrypted into the encfs6.xml file. What I do not understand is the following. Create en encrypted virtual fs of a folder by using passphrase A unmount this folder. Delete all contents including the encfs6.xml file If you then try to do the same with another passphrse I would expect that a new encfs6.xml would be created. However I get the following error message: "Error decoding volume key, password incorrect" So I wonder, what volume key is incorrect, I thought it was in the encfs6.xml file ?

    Read the article

  • Removing RAID on a DELL power-edge server

    - by Simon Callan
    We have a Dell Power-edge T110 server, with either a PERC S100 or S300 raid controller (I suspect S100), and 2 x 500GB SATA hard discs. These discs are running in RAID-1 configuration, (either 1 or 2 virtual discs), and on top of this, we have the C and D drives. As we are running low on disc space, we are looking at dropping the RAID to get some disc space back. Is it possible to split the discs back into 2 seperate hards discs that the OS can see, without losing all the data on the drives? Even better, would it be possible to split the D: drive, leaving the OS C: drive in RAID1 configuration?

    Read the article

  • Unable to connect to a remote SQL Server Instance over a VPN

    - by Jack Njiri
    I'm running SQL Server 2005 on two different servers running Win XP. The two servers are in different physical locations and are connected via a dedecated point to point data link in a virtual private network(VPN). Im only able to connect to the remote instance of SQL Server by specifying the IP address on the server name property. If I provide the actual server name say 'ServerA', then I get an error message. Everything works fine except configuring replication at the subscriber level, which requires the actual name of the instance, not an IP address or alias. I have already configured both instances on allow remote connections and im running the SQL Server Browser. How do I connect to the remote instance by providing the instance name? Alternatively how I configure subscription to a remote publisher without supplying the remote instance name?

    Read the article

  • Difference between VMWare tools?

    - by tore-
    I'm currently writing a module for puppet which installs VMWare tools to virtual nodes. I want to do this via yum and and yum-repo. VMWare have their own repo (http://packages.vmware.com/tools/esx/3.5latest/rhel5/x86_64/index.html) which I thought I could use, rather than creating my own. But then I noticed that their repo files is alot different than the rpm file used when installing VMWare Tools on the node, via the "Install/upgrade VMWare Tools" in vSphere. Does anyone know what the real difference is? Does anyone have any preferences?

    Read the article

  • smtp sasl authentication failure

    - by cromestant
    hello, I have configured and fixed almost all the problems with my postfix +courier + mysql setup for virtual mailboxes. I can now receive mail and send it from webmail (squirrel). BUT, what I can't do is authenticate from outside client. Since my isp blocks port 25 I setup postfix to work on 1025 for smtp and setup verbose loging. Here is the verbose log of a failed authentication process LOG Authentication for imap and pop3 seem to be working but this one is not. Here is the postconf -n output. Also through mysql I can verify that it is trying to validate through the system, running a query that returns the encrypted password stored in the database. I can't seem to find the error for this. thank you in advance

    Read the article

  • Bridge and OpenVPN with shorewall

    - by Javier Martinez
    I have this scenario and everything it's working OK, but I want to configure my Shorewall and I can't do it. My interfaces are: br0 (bridge of eth0) tun0 (OpenVPN) vnet* (each one of bridged interfaces with public IP's) Public Main IP: 188.165.X.Y OpenVPN IP's: 172.28.0.x Bridge: public ip's So, I have the next configuration for shorewall: /etc/shorewall/zones #ZONE TYPE OPTIONS IN OUT # OPTIONS OPTIONS fw firewall inet ipv4 road ipv4 /etc/shorewall/interfaces #ZONE INTERFACE BROADCAST OPTIONS inet br0 detect routeback road tun+ detect routeback /etc/shorewall/policy #SOURCE DEST POLICY LOG LIMIT: CONNLIMIT: # LEVEL BURST MASK $FW all ACCEPT inet $FW DROP info road all DROP inet road DROP /etc/shorewall/tunnels #TYPE ZONE GATEWAY GATEWAY # ZONE openvpnserver:1194 inet 0.0.0.0/0 The problem is that even with shorewall running I am able to ping or connect to the virtual machines behind the bridge

    Read the article

  • Redirect an Apache2 SSL VirtualHost with mod_alias

    - by Jeff
    I want to make sure there aren't any odd behaviors that I don't know about when redirecting a SSL VirtualHost with mod_alias Redirect as outlined by Apache here. My code seems to work, but since SSL virtual hosts are restricted to just one IP address, I want to make sure there aren't any problems eluding me. Explicitly not using TLS. I'm stuck with Apache 2.2 for now. <VirtualHost *:443> ServerName example.com SSLEngine On Redirect 301 / https://www.example.com/ </VirtualHost> <VirtualHost *:443> ServerName www.example.com SSLEngine On # Do stuff # </VirtualHost> So I guess my question is, should SSL VirtualHost redirection with mod_alias Redirect work the same as non-SSL redirection?

    Read the article

  • Deep freeze alternative for Ubuntu

    - by Nrew
    I made some research and found out that Deep freeze is not available for ubuntu. Is there a software like deep freeze for Ubuntu 10.04. To prevent writing data on the disk. I need this so that I could try all sorts of stuff on Ubuntu without worrying if I could damage the Windows installation that is installed along side with it. Virtual box is good. But the performance is not. Because I only have 2gb of ram.

    Read the article

  • IPTables masquerading with one NIC

    - by Tuinslak
    Hi, I am running an OpenVPN server with only one NIC. This is my current layout: public.ip > Cisco firewall > lan.ip > OpenVPN server lan.ip = 192.168.22.70 The Cisco firewall forwards the requests to the oVPN server, thus so far everything works and clients are able to connect. However, all clients connected should be able to access 3 networks: lan1: 192.168.200.0 (vpn lan) > tun0 lan2: 192.168.110.0 (office lan) > eth1 (gw 192.168.22.1) lan3: 192.168.22.0 (server lan) > eth1 (broadcast network) So tun0 is mapped to eth1. Iptables output: # iptables-save # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *filter :INPUT ACCEPT [327:26098] :FORWARD DROP [305:31700] :OUTPUT ACCEPT [291:27378] -A INPUT -i lo -j ACCEPT -A INPUT -i tun0 -j ACCEPT -A INPUT -i ! tun0 -p udp -m udp --dport 67 -j REJECT --reject-with icmp-port-unreachable -A INPUT -i ! tun0 -p udp -m udp --dport 53 -j REJECT --reject-with icmp-port-unreachable -A FORWARD -d 192.168.200.0/24 -i tun0 -j DROP -A FORWARD -s 192.168.200.0/24 -i tun0 -j ACCEPT -A FORWARD -d 192.168.200.0/24 -i eth1 -j ACCEPT COMMIT # Completed on Wed Feb 16 14:14:20 2011 # Generated by iptables-save v1.4.2 on Wed Feb 16 14:14:20 2011 *nat :PREROUTING ACCEPT [302:26000] :POSTROUTING ACCEPT [3:377] :OUTPUT ACCEPT [49:3885] -A POSTROUTING -o eth1 -j MASQUERADE COMMIT # Completed on Wed Feb 16 14:14:20 2011 Yet, clients are unable to ping any ip (including 192.168.200.1, which is the oVPN's IP) When the machine was directly connected to the internet, with 2 NICs, it was quite simply solved with masquerading and adding static routes in the oVPN client's config. However, as masquerading won't accept virtual interfaces (eth0:0, etc) I am unable to get masquerading to work again (and I'm not even sure whether I need virtual interfaces). Thanks. Edit: OpenVPN server: # ifconfig eth1 Link encap:Ethernet HWaddr ba:e6:64:ec:57:ac inet addr:192.168.22.70 Bcast:192.168.22.255 Mask:255.255.255.0 inet6 addr: fe80::b8e6:64ff:feec:57ac/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6857 errors:0 dropped:0 overruns:0 frame:0 TX packets:4044 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:584046 (570.3 KiB) TX bytes:473691 (462.5 KiB) Interrupt:14 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:334 errors:0 dropped:0 overruns:0 frame:0 TX packets:334 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:33773 (32.9 KiB) TX bytes:33773 (32.9 KiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.1 P-t-P:192.168.200.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) ifconfig on a client: # ifconfig eth0 Link encap:Ethernet HWaddr 00:22:64:71:11:56 inet addr:192.168.110.94 Bcast:192.168.110.255 Mask:255.255.255.0 inet6 addr: fe80::222:64ff:fe71:1156/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3466 errors:0 dropped:0 overruns:0 frame:0 TX packets:1838 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:997924 (974.5 KiB) TX bytes:332406 (324.6 KiB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:37847 errors:0 dropped:0 overruns:0 frame:0 TX packets:37847 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2922444 (2.7 MiB) TX bytes:2922444 (2.7 MiB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:192.168.200.30 P-t-P:192.168.200.29 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:689 errors:0 dropped:18 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:468778 (457.7 KiB) wlan0 Link encap:Ethernet HWaddr 00:16:ea:db:ae:86 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:704699 errors:0 dropped:0 overruns:0 frame:0 TX packets:730176 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:520385963 (496.2 MiB) TX bytes:225210422 (214.7 MiB) static routes line at the end of the client's config (I've been playing around with the 192.168.200.0 -- (un)commenting to see if anything changes): route 192.168.200.0 255.255.255.0 route 192.168.110.0 255.255.255.0 route 192.168.22.0 255.255.255.0 route on a vpn client: # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.200.29 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 192.168.22.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.200.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 192.168.200.29 255.255.255.0 UG 0 0 0 tun0 192.168.110.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.110.1 0.0.0.0 UG 0 0 0 eth0 edit: Weirdly enough, if I set push "redirect-gateway def1" in the server config, (and thus routes all traffic through VPN, which is not what I want), it seems to work.

    Read the article

  • Sensitive data in init scripts

    - by Steve Jorgensen
    I'm adapting some examples I've found by Googling to build an init script to run a VirtualBox OSE virtual machine as a daemon. I would like to specify a password for VNC access to the VM, and this must be given as an argument to the VBoxHeadless command. Conventionally, init scripts are readable by standard users, and this seems like a useful convention, but I also don't want the VNC password for this VM to be stored in easily accessible plain text. What's the most appropriate/conventional way to handle this kind of situation? Maybe put a root-readable supporting data file someplace, and have the init script load the value from there?

    Read the article

  • Test/Dummy SMTP server for Windows

    - by geoaxis
    I would like to install a Test/Dummy SMTP server on a Windows 2008 server (virtual box). I just want to test my web application on the machine it self so I don't need the mails to go out on the internet, but just to be written to disk (so that I can verify that the mail function was indeed called and the correct data was handed over to SMTP) Can you recommend some tool. I guess starting your own SMTP server in python is an option. I am looking for a simple (ready to use) solution, targeted for tests systems. I will need to integrate it to automated tests (Selenium) at a later stage. Thanks

    Read the article

  • rpd over https using a linux client

    - by Nils
    My employer switched from vpn and rdp to using what our admin calls "rdp over https". Since that switch I find myself unable to connect to the "new" rdp server. I think the progress is as follows: A rdp gateway-server is connected via tls the requested sever (different from the gateway-server) is then connected through the tls connection. In windows mstsc-settings the server name is the "internal network name" of the machine I wish to connect. And on the last tab (in German it is called "leistung" - could be activity) I go to the "connection from everywhere" settings and set the gateway-server under gateway-server. Now: Is there any way to use this scenario under linux (apart from a virtual machine running Windows)? I am interested in free ideas (e.g. is it possible to create a tls tunnel and connect through that using freerdp/rdesktop?) non-free ideas. As long as they work I'll worry about the costs later. Free ideas would be better :-)

    Read the article

  • Configuring Mail Relay

    - by ServerChecker
    I'm running Ubuntu Server 9.10 with Postfix and Webmin. I have created virtual hosts for 3 domains following this serverfault.com answer. But the mail isn't relaying out to the world. I have 3 domains tied into my DNS in webmin, as well as inside DNS clicked Mail Server and followed that instruction using this article on the web. The domains and the web servers work just fine. I also have FTP working just fine. So, the remaining problem I have is mail. Can't forward mail out to a Gmail account for some reason. Note I'm just trying to do the "easy version" of Postfix config and if your answer is in Webmin-ease, that would help me. However, I can edit a text file if you suggest.

    Read the article

  • Best filesystem choices for NFS storing VMware disk images

    - by mlambie
    Currently we use an iSCSI SAN as storage for several VMware ESXi servers. I am investigating the use of an NFS target on a Linux server for additional virtual machines. I am also open to the idea of using an alternative operating system (like OpenSolaris) if it will provide significant advantages. What Linux-based filesystem favours very large contiguous files (like VMware's disk images)? Alternatively, how have people found ZFS on OpenSolaris for this kind of workload? (This question was originally asked on SuperUser; feel free to migrate answers here if you know how).

    Read the article

  • How to share internet connection on Mac os x to Virtualbox vm’s using Host-only

    - by redben
    In one line : is the following possible : Airport <- "osx bridge" - vbox-Host-only - vm's Virtualbox (3.1.4) setup : Host : Mac OS X 10.5 Guest : Ubuntu Linux adapter1 - Bridged (en1: Airport) : To give the vm access to internet and communicate when Airport is connected adapter2 - Host-Only (vboxnet0) : To enable host/guest communication when Airport is not connected I'd like to make it simpler and only keep adapter 2 (host-only) and relying on os x connection sharing/bridging I thought i could just keep the Host only configuration, and on the host go to internet sharing and select "share from airport" to vboxnet0 . Only to find out that vbox's virtual interface doesn't appear in the interfaces list on os x preferences. I know that on a linux host you could install something called bridge-utils and use that to bridge the two insterfaces. Is there any thing like that for Mac ?

    Read the article

  • Setup dhcpd without gateway on purpose

    - by MBober
    I have an XP machine with two network interfaces. One is connected to my company's network (and the Internet). The other is a very local network which connects some hardware with my PC. Both the hardware and my XP machine's second network interface obtain configuration from a dhcpd running on Ubuntu in a virtual machine on my XP machine. I entered some dummy gateway in /etc/dhcp3/dhcpd.conf like 192.168.3.1 which does not match any existing device just to get dhcpd started. The problem is that my XP machine now tries to route Internet traffic through 192.168.3.1 in most of the cases which, of course, results in an error. Is there any way to set up dhcpd in a way that the clients know that there is no gateway in this network? By the way: setting the gateway manually in XP is off the table because this needs administrator privileges which I don't have.

    Read the article

  • Running PHP scripts as the owner of the PHP file: security issues

    - by thomasrutter
    I'm using suexec to ensure that PHP scripts (and other CGI/FastCGI apps) are run as the account holder associated with the relevant virtual host. This allows for securing each users' scripts from reading/writing by other users. However, it occurs to me that this opens up a different security hole. Previously, the web server ran as an unprivileged user, with read-only access to user's files (unless the user changed the file permissions for some reason). Now, the web user can also write to user's files. So while I've prevented different users taking advantage of each other's scripts, I've made it so that in the event that some application has a remote code injection vulnerability, it now has not only read access but also write access to all that user's scripts and website. How can I deal with this? One idea I've had is to create a second user account for each user account in the system, so that each user has their own user account, and all their scripts are run under another user account. But that seems cumbersome.

    Read the article

  • Maximum disk size for a Debian 6 VMware installation?

    - by Mohamed Abobakr
    I'm planning to install a variety of Linux distributions on VMware Player to get more experience with Linux (I've only used Fedora back in university). I'm starting with Debian 6.0.5 Squeeze, and have already downloaded the small CD i386 netinst image. In the new virtual machine wizard, it's asking me for the maximum disk size of the image. It says that the recommended size for Debian 6 is 8 GB. However, I'm trying to figure out what is the absolute minimal size that I can get away with, since I'm only testing it out with very few software installations (mainly testing web server applications).

    Read the article

  • Security issues of running PHP scripts as the owner of the PHP file with suexec

    - by thomasrutter
    I'm using suexec to ensure that PHP scripts (and other CGI/FastCGI apps) are run as the account holder associated with the relevant virtual host. This allows for securing each users' scripts from reading/writing by other users. However, it occurs to me that this opens up a different security hole. Previously, the web server ran as an unprivileged user, with read-only access to user's files (unless the user changed the file permissions for some reason). Now, the web server can also write to user's files. So while I've prevented different users taking advantage of each other's scripts, I've made it so that in the event that some application has a remote code injection vulnerability, it now has not only read access but also write access to all that user's scripts and website. How can I deal with this? One idea I've had is to create a second user account for each user account in the system, so that each user has their own user account, and all their scripts are run under another user account. But that seems cumbersome.

    Read the article

  • Ubuntu displaying GDM but no login

    - by Shawn
    Ubuntu (Wubi, Lucid Lynx) boots and shows the login screen itself with the background and plays the boot sound but a list of users is never displayed. A mouse is on screen and I can move it but, alas, it does nothing. Dropping to a virtual term with CTRL+Alt+F# drops me to a cursor but I can't actually input anything. I can't boot into single-user with GRUB since it's Wubi and it never specifies a boot kernel directly in GRUB's initial menu.lst (only in files that it then reads from). Other details that may be helpful: Single monitor Same video card that's been working for months No new hardware Edit: I ssh'd in since it evidently booted up the sshd which is handy. dpkg-reconfigure gdm didn't do anything helpful. I do, however, get a "no seat-id found" when manually running it.

    Read the article

  • Apache ProxyPass ignore static files

    - by virtualeyes
    Having an issue with Apache front server connecting to a Jetty application server. I thought that ProxyPass ! in a location block was supposed to NOT pass on processing to the application server, but for some reason that is not happening in my case, Jetty shows a 404 on the missing statics (js, css, etc.) Here's my Apache (v 2.4, BTW) virtual host block: DocumentRoot /path/to/foo ServerName foo.com ServerAdmin [email protected] RewriteEngine On <Directory /path/to/foo> AllowOverride None Require all granted </Directory> ProxyRequests Off ProxyVia Off ProxyPreserveHost On <Proxy *> AddDefaultCharset off Order deny,allow Allow from all </Proxy> # don't pass through requests for statics (image,js,css, etc.) <Location /static/> ProxyPass ! </Location> <Location /> ProxyPass http://localhost:8081/ ProxyPassReverse http://localhost:8081/ SetEnv proxy-sendchunks 1 </Location>

    Read the article

  • Cannot run java as regular linux user.

    - by Roger
    I am having problems trying to run java as a normal user on linux. It runs fine as root user but not as a regular user. Any help would be apreciated. Thanks root@pro1 [~]# which java /usr/local/jdk/bin/java root@pro1 [~]# java -version java version "1.6.0_22" Java(TM) SE Runtime Environment (build 1.6.0_22-b04) Java HotSpot(TM) 64-Bit Server VM (build 17.1-b03, mixed mode) root@pro1 [~]# su istream istream@xxxxxxxxx [/root]# which java /usr/local/jdk/bin/java istream@xxxxxxxxx [/root]# java -version Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. istream@xxxxxxxxx [/root]#

    Read the article

< Previous Page | 410 411 412 413 414 415 416 417 418 419 420 421  | Next Page >