Search Results

Search found 20852 results on 835 pages for 'local seo'.

Page 417/835 | < Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >

• 6to4 tunnel: cannot ping6 to ipv6.google.com?

  - by quanta

  Hi folks, Follow the Setup of 6to4 tunnel guide, I want to test ipv6 connectivity, but I cannot ping6 to ipv6.google.com. Details below: # traceroute 192.88.99.1 traceroute to 192.88.99.1 (192.88.99.1), 30 hops max, 40 byte packets 1 static.vdc.vn (123.30.53.1) 1.514 ms 2.622 ms 3.760 ms 2 static.vdc.vn (123.30.63.117) 0.608 ms 0.696 ms 0.735 ms 3 static.vdc.vn (123.30.63.101) 0.474 ms 0.477 ms 0.506 ms 4 203.162.231.214 (203.162.231.214) 11.327 ms 11.320 ms 11.312 ms 5 static.vdc.vn (222.255.165.34) 11.546 ms 11.684 ms 11.768 ms 6 203.162.217.26 (203.162.217.26) 42.460 ms 42.424 ms 42.401 ms 7 218.188.104.173 (218.188.104.173) 42.489 ms 42.462 ms 42.415 ms 8 218.189.5.10 (218.189.5.10) 42.613 ms 218.189.5.42 (218.189.5.42) 42.273 ms 42.300 ms 9 d1-26-224-143-118-on-nets.com (118.143.224.26) 205.752 ms d1-18-224-143-118-on-nets.com (118.143.224.18) 207.130 ms d1-14-224-143-118-on-nets.com (118.143.224.14) 206.970 ms 10 218.189.5.150 (218.189.5.150) 207.456 ms 206.349 ms 206.941 ms 11 * * * 12 10gigabitethernet2-1.core1.lax1.he.net (72.52.92.121) 214.087 ms 214.426 ms 214.818 ms 13 192.88.99.1 (192.88.99.1) 207.215 ms 199.270 ms 209.391 ms # ifconfig tun6to4 tun6to4 Link encap:IPv6-in-IPv4 inet6 addr: 2002:x:x::/16 Scope:Global inet6 addr: ::x.x.x.x/128 Scope:Compat UP RUNNING NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:11 dropped:0 overruns:0 carrier:11 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) # iptunnel sit0: ipv6/ip remote any local any ttl 64 nopmtudisc tun6to4: ipv6/ip remote any local x.x.x.x ttl 64 # ip -6 route show ::/96 via :: dev tun6to4 metric 256 expires 21332777sec mtu 1480 advmss 1420 hoplimit 4294967295 2002::/16 dev tun6to4 metric 256 expires 21332794sec mtu 1480 advmss 1420 hoplimit 4294967295 fe80::/64 dev eth0 metric 256 expires 15674592sec mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth1 metric 256 expires 15674597sec mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev tun6to4 metric 256 expires 21332794sec mtu 1480 advmss 1420 hoplimit 4294967295 default via ::192.88.99.1 dev tun6to4 metric 1 expires 21332861sec mtu 1480 advmss 1420 hoplimit 4294967295 # ping6 -n -c 4 ipv6.google.com PING ipv6.google.com(2404:6800:8005::68) 56 data bytes From 2002:x:x:: icmp_seq=0 Destination unreachable: Address unreachable From 2002:x:x:: icmp_seq=1 Destination unreachable: Address unreachable From 2002:x:x:: icmp_seq=2 Destination unreachable: Address unreachable From 2002:x:x:: icmp_seq=3 Destination unreachable: Address unreachable --- ipv6.google.com ping statistics --- 4 packets transmitted, 0 received, +4 errors, 100% packet loss, time 2999ms What is my problem? Thanks,

  Read the article

• Windows 7 NNTP Server

  - by int0x90

  I am doing some development that requires some interaction with an NNTP server, however I don't want to develop against a live server for obvious reasons and am trying to get a local NNTP server setup for testing, but for the life of me I can't find any guides on setting one up in (preferably) Windows 7. Can anyone shed some light? I've found that in IIS 6 you were able to setup an NNTP server, but I unfortunately do not have a 2003 VM at my disposal, I'm stuck with either XP or Windows 7. Thanks

  Read the article

• How is incoming SMTP mail being delivered despite blocked port

  - by Josh

  I setup a MX mail server, everything works despite port 25 being blocked, I'm stumped as to why I am able to receive email with this setup, and what the consequences might be if I leave it this way. Here are the details: Connections to SMTP over port 25 and 587 both reliably connect over my local network. Connections to SMTP over port 25 are blocked from external IPs (the ISP is blocking the port). Connections to Submission SMTP over port 587 from external IPs are reliable. Emails sent from gmail, yahoo, and a few other addresses all are being delivered. I haven't found an email provider that fails to deliver mail to my MX. So, with port 25 blocked, I am assuming other MTA servers fallback to port 587, otherwise I can't imagine how the mail is received. I know port 25 shouldn't be blocked, but so far it works. Are there mail servers that this will not work with? Where can I find more about how this is working? -- edit More technical detail, to validate that I'm not missing something silly. Obviously in the transcript below I've replaced my actual domain with example.com. # DNS MX record points to the A record. $ dig example.com MX +short 1 example.com $ dig example.com A +short <Public IP address> # From a public server (not my ISP hosting the mail server) # We see port 25 is blocked, but port 587 is open $ telnet example.com 25 Trying <public ip>... telnet: Unable to connect to remote host: Connection refused # Let's try openssl $ openssl s_client -starttls smtp -crlf -connect example.com:25 connect: Connection refused connect:errno=111 # Again from a public server, we see port 587 is open $ telnet example.com 587 Trying <public ip>... Connected to example.com. Escape character is '^]'. 220 example.com ESMTP Postfix ehlo example.com 250-example.com 250-PIPELINING 250-SIZE 10485760 250-VRFY 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250-DSN 250-BINARYMIME 250 CHUNKING quit 221 2.0.0 Bye Connection closed by foreign host. Here is a portion from the mail log when receiving a message from gmail: postfix/postscreen[93152]: CONNECT from [209.85.128.49]:48953 to [192.168.0.10]:25 postfix/postscreen[93152]: PASS NEW [209.85.128.49]:48953 postfix/smtpd[93160]: connect from mail-qe0-f49.google.com[209.85.128.49] postfix/smtpd[93160]: 7A8C31C1AA99: client=mail-qe0-f49.google.com[209.85.128.49] The log shows that a connection was made to the local IP on port 25 (I'm not doing any port mapping, so it is port 25 on the public IP too). Seeing this leads me to hypothesize that the ISP block on port 25 only occurs when a connection is made from an IP address that is not known to be a mail server. Any other theories?

  Read the article

• Launching java web start application on windows machine with restricted policy w/o admin privileges

  - by FoxyBOA

  Everything works fine under local admin, but jnlp launching process fails under user with restricted policy. Could somebody point me out which permissions to check (registry branches, folders etc.)

  Read the article

• Software for measuring internet traffic?

  - by Lachlan McDonald

  I'm interested in finding a free piece of software for Windows XP & 7 that allows us to measure both incoming and outgoing internet traffic, but not traffic between users of the local network. I live in a shared household with three others, and we're interested to see which of us is using the largest amount of our monthly internet quota. We're all happy to install the necessary software. Any suggestions?

  Read the article

• Windows Remote Desktop Connection for just a single window (or a single program)

  - by RamyenHead

  Is it possible to have just one program running on the remote Windows machine appear in the local monitor, rather than the whole remote desktop? I heard SeamlessRDP provides something like that but only for connecting from Linux to Windows. What should I use in the case of connecting from Windows to Windows?

  Read the article

• Group Policy: Not working after few days

  - by Kabir Rao

  Hi, I have implemented a group policy as per the suggestion http://serverfault.com/questions/121065/change-local-computer-policy-on-windows-2003-terminal-server . it worked fine when i tested..but after two days it is not working...can somebody help. Thanks, Kabir

  Read the article

• Restore sqlite3 on Mac OS X for Google Chrome

  - by gaearon

  I was stupid enough to compile sqlite3 from source and install it to /usr, overriding default library. This being done, Google Chrome doesn't launch anymore, crashing with this output: Dyld Error Message: Library not loaded: /usr/lib/libsqlite3.dylib Referenced from: /System/Library/Frameworks/Security.framework/Versions/A/Security Reason: no suitable image found. Did find: /usr/lib/libsqlite3.dylib: mach-o, but wrong architecture /usr/local/lib/libsqlite3.dylib: mach-o, but wrong architecture /usr/lib/libsqlite3.dylib: mach-o, but wrong architecture Can I somehow revert sqlite3 to the original version I had, or fix the issue somehow else?

  Read the article

• Port forwarding problem

  - by Steve

  I have a modem connecting to ADSL2 network and a router connecting to the modem. The rest of the machines all connect to the router. The modem has IP as 192.168.1.1 and the router's IP is 192.168.0.1. From the modem configuration, I can see that the modem thinks the router's IP is 192.168.1.2. I can visit the router by either using 192.168.0.1 or 192.168.1.2. Now I forward a port from the router to a private machine. It works. I can test it by typing 192.168.1.2 and it is redirected to the private machine. But if I use 192.168.0.1, it is still the router's configuration page. I also do a port forwarding on my modem. Since the modem sees only the router, I can only forward the port to the router's specific port. And I am thinking that by doing this, I can reach the private machine after two times port forwarding, once on the modem and once on the router. I also have a static public IP. I want to achieve the goal that when someone types the public IP, he will be redirected to the private machine. But when I use some online port forwarding tester, the result always says that the port is closed on the public IP. I have the questions: Why my router has two IPs? Why using one IP I can see the port forwarding result while using the other I cannot? I think the port forwarding only works when visiting from outside, rather than from both outside and inside. Otherwise, if I set port forwarding on my router/modem on port 80, I will never be able to see its original configuration page again. Everything is forwarded. Am I right? How can I achieve my goal described above? By achieve this, I will have a dedicated server of my own and the users can visit from the public IP. Anyone can correct me on any mistakes I made? I am using Netconn modem and D-Link DIR-300 router. Thank you very much for any help. Edit: Consider I have correctly setup the whole thing. Now I want to test my website by using public IP to visit it, but the port forwarding doesn't work. Does it consider that I am inside the local network and not using the port forwarding? If so, how can I do it? I ask my friends (outside my local network) to have a try and they can see the website. What should I do so that from the inside, I can do the testing? Thank you very much.

  Read the article

• google android sdk [closed]

  - by user34373

  Possible Duplicate: google android with nmap I am trying to install a port scanner on android sdk which is installed on ubuntu.I have two problems: how to install any linux application on android SDK?? how to copy the data from the local hard drive to the emulator??

  Read the article

• How can I get my home machines to connect to each other via hostname?

  - by Marplesoft

  I've got a standard Linksys router and a few laptops - mix of Windows Vista and Mac OS X. Shouldn't my router act as a DNS server to resolve hostnames for the machines within my local network? If not, how else can I solve this? Static hosts files? Other solutions?

  Read the article

• How to make Tun module running at linux start

  - by harmony

  i installed Tun using: modprobe tun then did: lsmod | grep tun tun 83840 0 Please how to make Tun running at reboot? This is written on Hamachi website: ...Then add tun to the list of modules by using your favorite text editor and Create /etc/modules-load.d/tun.conf #Load tun module at boot. tun But this folder foes not exist in my /etc Is it wise to add line "modprobe tun" into /etc/rc.local ?

  Read the article

• re-use '~/.profile` for Fish?

  - by Albert

  (I'm talking about the shell Fish, esp. Fish's Fish.) For Bash/ZSH, I had ~/.profile with some exports, aliases and other stuff. I don't want to have a separate config for environment variables for Fish, I want to re-use my ~/.profile. How? In The FAQ, it is stated that I can at least import those via /usr/local/share/fish/tools/import_bash_settings.py, however I don't really like running that for each Fish-instance.

  Read the article

• Static build ffmpeg 0.8

  - by Riduidel

  Is there anywhere an available static build of ffmpeg with all encoder/decoders libs for Linux (not a source tarball, but a binary) ? Although this question seems trivial, I spent the last half hour looking for it, without any success. EDIT I'm looking for binary to be run on x86 Suse 10 systems. Notice I can't use local package manager as all update repositories have bene removed by admin (to avoid uncontrolled software update).

  Read the article

• Access Home Network Server via External Address

  - by Dominic Barnes

  For the last few months, I've been using a server on my home network for basic backups and hosting some small websites. Up until this past week, I've been using Comcast (cable) as an ISP and now that I've moved into an apartment, I'm using AT&T. (DSL) I've set up dynamic DNS and I can verify it works externally. However, I can't seem to access the public address from within the local network. Is there something DSL does differently from Cable that makes this frustration possible?

  Read the article

• Error "Windows cannot find ### this file does not have a program associated with it for performing t

  - by ChrisFletcher

  I'm getting the above error message while trying to browse to a local share on a windows 2003 server machine. The server is on the network, has an assigned IP address, can access the internet and is otherwise functioning normally. I realise this message can occur when opening a document or file which has no application associated with it but, I'm trying to access a share?

  Read the article

• Sharing Template emails in public folders

  - by clang1234

  I have a template email I've created and saved on my local templates folder. How do I share my template so anyone on my domain can use it?

  Read the article

• SQL Server 2008 R2 upgrade fails on upgrade rule check

  - by Tim

  I'm trying to upgrade an evaluation instance of SQL Server 2008 to a fully licensed instance of SQL Server 2008 R2. I made it most of the way through the installer, but I'm getting stopped at the Upgrade Rules page - the SQL Server Analysis Services Upgrade Service Functional Check is failing. The specific error I get: Rule "SQL Server Analysis Services Upgrade Service Functional Check" failed. The current instance of the SQL Server Analysis Services service cannot be upgraded because the Analysis Services service is disabled or not online. Please start the service and then run the upgrade rules check again. Simple enough - just need to start the service. Here's where it gets troublesome. When I open Services and go to start the SQL Server Analysis Services (MSSQLSERVER) service, it provides me the following message: The SQL Server Analysis Services (MSSQLSERVER) service on Local Computer started and then stopped. Some services stop automatically if they are not in use by other services or programs. Trying from the command line as Administrator yields: PS C:\Windows\System32 net start MSSQLServerOLAPService The SQL Server Analysis Services (MSSQLSERVER) service is starting... The SQL Server Analysis Services (MSSQLSERVER) service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534. I've tried changing the logon setting of this service to Administrator, a user with admin privileges, and both the Local System and Network Service accounts - nothing works. In addition, when I look at the service through the SQL Server Configuration Manager (also run as Administrator), attempting to change the logon setting for the service results in the message: The server threw an exception. [0x80010105] I have no need for analysis services themselves - all I need is for this one service to be running long enough to do the R2 upgrade, then it can shut down again. Any thoughts on how to get the Analysis Services service running? Update: Checking the event log, I found an error logged to the Application log from the MSSQLServerOLAPService. It has event ID 0, task category (289), and says: The service cannot be started: XML parsing failed at line 1, column 4: Unrecognized input signature.

  Read the article

• Preventing Postfix backscattering

  - by Must Do Better

  I am having problems with the Postfix mail server being used for backscattering, I have tried the suggestions in the manual but nothing seems to work. Does anyone know how we can reject any mail from entering the queue if the recipient doesn't match a local recipient rather than send bounce emails? I'm assuming it should be a fairly straight forward change in the configuration files. Just to note I am using Webmin/Virtualmin on the server.

  Read the article

• Using smartctl to get vendor specific Attributes from ssd drive behind a SmartArray P410 controller

  - by Lairsdragon

  Hi! Recently I have deployed some HP server with SSD's behind a SmartArray P410 controller. While not official supported from HP the server work well sofar. Now I like to get wear level info's, error statistics etc from the drive. While the SA P410 supports a passthru of the SMART Command to a single drive in the array the output I was not able to the the interesting things from the drive. In this case especially the value the Wear level indicator is from interest for me (Attr.ID 233), but this is ony present if the drive is directly attanched to a SATA Controller. smartctl on directly connected ssd: # smartctl -A /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0000 100 000 000 Old_age Offline In_the_past 0 4 Start_Stop_Count 0x0000 100 000 000 Old_age Offline In_the_past 0 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 8561 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 55 192 Power-Off_Retract_Count 0x0002 100 100 000 Old_age Always - 29 232 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 0 233 Unknown_Attribute 0x0002 088 088 000 Old_age Always - 0 225 Load_Cycle_Count 0x0000 198 198 000 Old_age Offline - 508509 226 Load-in_Time 0x0002 255 000 000 Old_age Always In_the_past 0 227 Torq-amp_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 228 Power-off_Retract_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 smartctl on P410 connected ssd: # ./smartctl -A -d cciss,0 /dev/cciss/c1d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net (Right, it is complety empty) smartctl on P410 connected hdd: # ./smartctl -A -d cciss,0 /dev/cciss/c0d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Current Drive Temperature: 27 C Drive Trip Temperature: 68 C Vendor (Seagate) cache information Blocks sent to initiator = 1871654030 Blocks received from initiator = 1360012929 Blocks read from cache and sent to initiator = 2178203797 Number of read and write commands whose size <= segment size = 46052239 Number of read and write commands whose size > segment size = 0 Vendor (Seagate/Hitachi) factory information number of hours powered up = 3363.25 number of minutes until next internal SMART test = 12 Do I hunt here a bug, or is this a limitation of the p410 SMART cmd Passthru?

  Read the article

• How can one undelete an accidentally deleted fan page?

  - by Doug T.

  No clue if this is an appropriate SU question or if it's best migrated elsewhere. I help administer a Facebook fan page for a local business. Recently one of the other administrators accidentally deleted the Facebook fan page. We have tried to fill out this form: http://www.facebook.com/developers/developer_help.php And have yet to receive a response. We are desperate to have the fan page restored. Thanks for any pointers.

  Read the article

• Windows 8 shortcut keys via RDP

  - by Paul

  It is possible to access any of the new shortcut keys found in Windows 8 via RDP, such as those in the accepted answer in What are the new shortcuts for Windows 8?, without having to redirect all Win key combinations through to the remote session. I am using both local and remote at the same time, and so would prefer alternate shortcuts for the remote session. Such as the basic ones listed at the Microsoft site here, and for example Alt+Home will return you to the Start screen. What about the more interesting shortcuts?

  Read the article

• How to make a custom Windows 8 installation

  - by Nison Maël

  What is the step-by-step way to make a custom Windows 8 installation ? For example, with a minimal example, I would like an image which : Has a single user named "User" This user has Chrome and Firefox installed Has no link in the start screen except the desktop link Has no buttons on the task bar I have tried to use sysprep but I lose user settings. The CopyProfile seems to apply Administrator's settings on programmaticaly created accounts, but does not preserve local users settings accross installations.

  Read the article

• rsync doesn’t sync files

  - by modi

  Hi I'm using rsync(with Cygwin) to sync 2 local folder The folder contains binary files I'm using the following command rsync.exe -av dir1/ dir2/ but the files in dir2 where only partially update, there are few different files does anybody know of a problem with rsync on windows? should i use some other flags 10'xs

  Read the article

• Lync server 2010 Active Directory Preparation with a Windows Server 2003 DC

  - by juFo

  I'm trying to install Lync server 2010 but i'm stuck for a while now with the "Active Directory Preparation" part of the Lync server 2010 installation. The "Prepare Schema" fails with the following error: "Step 1: Prepare Schema Run once per deployment. Extends the schema for Lync Server. Not Available: Failure occurred while attempting to check the schema state. Please ensure Active Directory is reachable." screenshot: https://skydrive.live.com/#cid=CB15F1A932B364BE&id=CB15F1A932B364BE%211742 The situation: 1 server with Windows Server 2003 (x86), which is the only Domain Controller (DC) 1 server with Windows Server 2008 R2 (x64) where Lync should be installed. First I have found that the DFL/FFL were not correct: On the DC (server2003) I have changed the Domain Functional Level to Windows Server 2003 and also the Forest Functional Level to Windows Server 2003. If I check these settings on the Server2008 with Active Directory Domains and Trusts, I see indeed that the DFL and FFL are being set to Windows Server 2003. (Windows Server 2003 is the minimum required for Lync server 2010) I tried the Lync AD Preparation again but still got the same message: https://skydrive.live.com/#cid=CB15F1A932B364BE&id=CB15F1A932B364BE%211742 I'm logged in on the Server2008 and Server2003 with the domain administrator account. If I check "Active Directory Users and Computers" and go to the directory Users and watch the properties from the Administrator User then it is also a Member of: Domain Admins Domain Users Enterprise Admins Schema Admins Group Policy Creator Owners The firewall on the server2008 is turned off, still nog working So now my question is: what should I do to make the Lync setup (Active Directory Preparation) work? (I would appreciate clear step-by-step suggestions to check.) Thanks in advance. Update 1: Now I've extended AD successfully on the 2003 DC, using this link: http://blogs.pointbridge.com/Blogs/sloan_jason/Pages/Post.aspx?_ID=2 but when I check the Active Directory Preparation again on the Lync install, it still gives me the same error as in the screenshot I've provided. Update 2: I found out that there is a log on "C:\Users\\AppData\Local\Temp\ with this: Get-CSDomainState Get Domain State Error: An error occurred: "Microsoft.Rtc.Management.ADConnect.NoSuitableServerFoundException" "No suitable domain controller was found in domain "OurDomain.LOCAL". Errors:\r\n"OurDCserver.OurDomain.LOCAL5.2 (3790)5.2 (3790) Service Pack1OurDCserver.OurDomain.LOCAL5.2 (3790)5.2 (3790)Service Pack 1"" I thought Lync could be installed with a Windows Server 2003 (according to the documentation on technet) and it doesn't require a SP. :s

  Read the article

< Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >