Search Results

Search found 15323 results on 613 pages for 'db2 connect'.

Page 418/613 | < Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425  | Next Page >

• "Disk boot failure" error after installing Windows 7 on SSD

  - by Tony_Henrich

  I have a system with 3 SATA drives which runs fine. Got a new SSD drive and wanted to install a fresh Windows-7 on it. So I removed the boot drive and replaced it with the SSD drive. Installed Windows and when it was done, rebooted and now I get "Disk boot failure. Insert system disk and press enter" error message. I reinstall again and still same message. Removed the SSD and put back the original drive and I got the same message!! I checked the BIOS and things look good. Something is wrong. Two questions: 1- Why isn't the new Windows booting from the SSD? 2- Why isn't the machine booting using the previous working configuration anymore, after removing the SSD? I did connect it during the second Windows installation but it was the last drive in the SATA connector. Would Windows installer mess with its MBR sector?

  Read the article

• Partition table damaged

  - by emaster70

  Hello, I'm currently in a terrible situation with my hdd: I was trying to install an OS side by side with my windows 7 x64 and I used the Paragon Partition Manager feature made for that. It disabled/hid/(damaged?) one of my partitions and now I can no longer access it. The partition, unfortunately, contains data I need to access urgently and I've got no backup. To complicate things even further I don't have another PC (I'm writing this msg from my iphone) and all I can rely on is a backtrac 4 disk (wkn't connect to my wifi, gets stuck obtaining IP address) and. Windows 7 x64 disk. Booting into windows fails with the pc hanging on the starting windows screen. Safe mode won't work either. Is there anything I can do? Here's the layout of the disk: Recovery partition Win partition Unallocated space (it's supposed to be my data partition) Other os partition (don't care about that, the installation of the other OS failed) Please help me, I'm desperate.

  Read the article

• Micro Btx Motherboard Replacement.

  - by Judy

  I got the Vundo virus that took out the mobo and hard drive on my Gateway GT5220. Is there a replacement that will work? I'm willing to keep XP. I want to fix it the cheapest way possible. The mobo is a NVIDIA GeForce 6150 AM2 microBTX with primary IDE and 4 SATA connections. I want to use a new SATA as my primary, but would like to be able to connect my old IDE drives to transfer my pictures from them to the new drive. I would appreciate any help. Thanks!

  Read the article

• Issues connecting to a pix 501 via console cable

  - by Bourne

  Have a pix 501 that was set up to do filtering and I was working on setting the vpn up when I lost ssh connectivity. Looking at the front, all 4 lan lights blink intensely green but in a very repetitive pattern. The funny thing is there are only 3 devices connected to the 4 ports so that's the first element that doesn't look right to me. Console cable light doesn't turn on when cable is plugged in and have tried rebooting it many many times to see the bootup sequence with no result. Also, I cannot connect to it via pdm or console but the traffic is permitted through. Are there any additional troubleshooting steps I could do or should I count it as dead? Thank you.

  Read the article

• Sharepoint asks for NTLM credentials for every unique URL. How do I stop it?

  - by CamronBute

  I'm tasked with troubleshooting a problem we're having with a SP2010 site. The app is external, and there are several clients that must connect. Some clients are receiving a crazy amount of credential requests when trying to log on. It appears to ask for every unique URL (eg. every different picture, link, etc) and it won't stop. Other clients are having no problems. I cannot seem to replicate the issue, either. I'm attempting to replicate by restricting all settings (including cookies) on my own browser, but to no avail. I put the HTTP request under a microscope, and it's asking for NTLM credentials. The client is using IE8, and the browser is running in Protected Mode, but the browser settings cannot be determined... I'm guessing this is a webserver thing, simply because it appears to be an authentication thing. What might the problem be?

  Read the article

• Everytime I ping my server, it is pinging localhost instead?

  - by esac

  I recently setup a new server for use with SQL. When I tried to connect via SSMS remotely, it failed. When I pinged it, it is pinging localhost, what is going on here? Please let me know if more details will help. It is Windows Server 2008. C:\>ping 0x7F000001 Pinging 127.0.0.1 with 32 bytes of data: Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Reply from 127.0.0.1: bytes=32 time<1ms TTL=128 Ping statistics for 127.0.0.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms

  Read the article

• JBoss behind NAT hostname problem

  - by z0mbix

  My company has a JBoss cluster sitting behind a firewall that performs NAT. We forward ports to JBoss from the firewall, so that our client application can access the server. We are having trouble when JBoss replies it tells the clients to connect to the internal hostname, not the external one with which the initial connection was made. Is this something that is easily resolved/configured? How are other JBoss app servers configured behind NAT firewalls? Split-horizon DNS? Many Thanks

  Read the article

• Simple secured SFTP tunnel?

  - by babonk

  I'd like to setup an sftp tunnel so that I can connect to an IP-secured SFTP server through a gateway computer from anywhere, and download the files to anywhere. I was thinking of using a combination with netcat, having it listen to either WinSCP or PuTTY sFTP (doesn't matter which). Not sure how I would download the files to the connecting computer though. I would like the tunnel to be secured, preferably, with a username/password. I'm open to using alternative software but I'm looking for unintrusive, simple command line stuff because I don't want to install a lot on this computer. Thanks

  Read the article

• Is there any way to enable remote desktop with a password without setting a password on the os?

  - by Coder

  I'm running Windows 7 and would like to use remote desktop to connect to my home computer. As such i want to enable password security for remote desktop, but I do not want to have to enter a password to log into my computer if i'm physically at my computer. Is there any way to do this? I am an administrator user and I want to have the same icons and configuration regardless of if i log in remotely or locally but i want only the remote connection to require a password. I read about being able to do something similar by adding another user account, but is there any way to do it so that the same icons and settings take affect regardless of how i log in? Thanks.

  Read the article

• Windows clients cannot access machine running DHCP server

  - by science9712

  I'm trying to setup a small LAN, using an Ethernet switch, an Arch Linux server, and around 10 Windows XP machines. This network has no outside connections. The Arch machine has a self configured ip address (configured with ip addr add 192.168.0.1 dev eth0), and acts as a DHCP server(using dhcpd). This portion works great, windows clients get IP addresses, the correct gateway settings, perfect. However, the clients cannot connect to each other, or to the dhcp server. When I run ping 192.168.0.1 on any client, I get no response, same happens if I try to ping any other client. On the gateway machine, I can't ping any of the clients either. Any help would be much appreciated!

  Read the article

• Remotely start VNC server on computer with no Admin password

  - by Joe M.

  I'm trying to remotely access a particular computer of mine and it seems that VNC has stopped. I can tell that the computer is still running because I can VNC into another machine on the same network and can see my target machine under the Network section in Windows Explorer and can also ping it succesfully. To summarize: I own the target computer I am currently too far to physically access it Remote Desktop Connection feature of Windows is not enabled The computer normally runs a VNC server, but it seems to have stopped The computer is definitely on and connected to the network The computer has no password on the Admin account I can VNC into other computers on the same LAN Given these conditions how can I get into the target to open VNC server, or even just reboot the target (VNC should open on startup)? I have tried PsExec and get "access is denied", and also tried "Connect to another computer.." from the Computer Management console and also get "access is denied".

  Read the article

• telnet: Could not open connection to the host, on port 23

  - by Mihaela

  I need to telnet, to localhost. I am on windows. Once I got the error 'telnet is not recognized...' I looked online and found that I should do pkgmgr /iu:"TelnetClient". I did, then telnet localhost (0r 127.0.0.1, maybe with a port at the end), I get error: Could not open connection to the host, on port 23: Connect failed. I added the port to the firewall, disabled the firewall.. run as admin.. Please help me get telnet to work! Thank you.

  Read the article

• WiFi problems on several Ubuntu installations

  - by Rickyfresh

  Okay this is the first time I have ever had to ask a question as usually the Ubuntu community have answered everything already but on this occasion there are many people asking for the answer but not one good solution has become available so far so someone please help or I will have to install Windows on my sons and my girlfriends PCs and that would be a disaster as I am trying to help convince people to move from Windows. I installed 12.04 on three computers on the same day. Dell Inspiron (Works Perfect) Toshiba Satellite Home built Desktop The Dell works perfect but the other two either keep losing connection to the wireless Internet and even when they are connected they stop connecting to web sites, for some reason it searches Google fine but will not connect to web sites when a link is clicked. So far people have recommended in other forums: Removing network manager and installing wicd (didn't solve it) Changing the MTU in the wireless settings (didn't solve it) All sorts of messing about with Firefox settings (this doesn't solve it and even if it did this would leave most average PC users scratching their heads and wishing they had stuck to windows) The problem exists on two very different machines and different wireless cards so I doubt its a driver or hardware issue, also many other Ubuntu users are having the same problem with a vast array of different machines and wireless cards. Can someone please give a good solution to this as its going to turn a lot of people away from Ubuntu if they cannot get this sorted. I would give some PC specs but the two machines are vastly different and the other people complaining of this problem also have very different systems all showing the same problem.

  Read the article

• Postfix not delivering mails

  - by Sotocan

  Hi all, I have problems with a recently configured postfix MTA. When postfix starts the following warning appears: "postfix/qmgr[5078]: warning: connect to transport private/filter: No such file or directory" I have amavis-new as a content-filter, but even if I comment-out the relevant line, the warning appears. As a result (I think), of the above, I get errors like below, for every virtual domain that I have: "postfix/error[5080]: 254851834107: to=, relay=none, delay=13082, delays=13082/0.01/0/0.01, dsn=4.3.0, status=deferred (mail transport unavailable)" The good news for me, is that somehow I managed to fix that (don't ask me how!!!!) The problem is that now I have 50 or so mails, that were affected by the aforementioned problem, in the mail-queue... If I "postqueue -f " I get the same style of error as before (mail transport unavailable)...however new mails are delivered to their final destination properly... Any suggestions? Kind regards. P.S. Local mail delivery from/to Unix and virtual users, was OK write from the beginning!

  Read the article

• How do you use Time Capsule for MAC controlled Internet?

  - by Kevin Perttula

  I'm using an Internet Provider that requires a username and password to log in; the prompt shows up as soon as you open a web browser. Because of this, I can only have one device online at a time. How can I get my Time Capsule to essentially log in as the user and allow other devices to connect through it. My Time Capsule has worked with other ISPs that don't require the user log in, but I recently moved. I may be wrong about how the ISP is allowing access, I wasn't sure how to describe the problem. Thanks.

  Read the article

• IIS7.5 Domain Account Application Pool Identity for SQL Server Authentication

  - by user38652

  In Windows Server 2003/IIS6 land we typically create an app pool that runs as the identity of an AD account created with minimal privileges simply for that purpose. This same domain user would also be granted access to SQL Server so that any ASP.NET application in that app pool would be able to connect to SQL Server with Integrated Security=SSPI. We are making a brave move to the world of Windows Server 2008 R2/IIS7.5 and are looking to replicate this model, but I am struggling with how to make the application pool in IIS7.5 run as the identity of an AD account? I know this sounds simple and hopefully it is, but my attempts so far have been fruitless. Should the application pool identity be a 'Custom account' for a domain account? Does the domain account need to be added to any groups?

  Read the article

• reverse-proxy web access on a server where only SSH is allowed

  - by Kaii

  Every once in a while i have to connect to a server where access is highly restricted. Only inbound SSH is allowed by the DMZ firewall - outbound HTTP connections are blocked. I'm looking for a good way to tunnel web access through my SSH session, so i can install updates and software via yum / apt-get. What do you do in such a situation? SSH has the -D <port> SOCKS proxy option. But unfortunately it is one-way only from client to server and there is no reverse option.

  Read the article

• Nameserver Problem

  - by Ruel

  I installed Virtualmin GPL with BIND, etc. I created a virtual host for my main domain, and edited the zone file, added the A records for the nameservers ns1.mydomain.com and ns2.mydomain.com. All looks good from the VPS, whenever I do a dig or nslookup, all seems fine, returning correct details. But when I test externally, there are no results. I tried several sites such as intodns, etc. It says my nameservers doesn't point to any IP. I have registered my nameservers with the appropriate IP in my registrar, and I even contacted support to verify this, and they told me that the registration was successful, but when they dig my nameservers, there's no ip address. I can also connect to my server IP's port 53. Also, I know that the DNS propagation is 24-48 hours. But there has to be some server that can return the correct results by now. Please lead me to the right direction, thanks.

  Read the article

• Wi-Fi or Bluetooth to USB converter

  - by yerzhik

  Is there a device, that works without a driver, you just connect it as usb, and receive any signal sent to it as if it were COM Port wired connection? For example, such a device that gets data sent to it by Wi-Fi network or Bluetooth and resends it to the USB. Of course it has to be set up once (network name, password etc) and for this purpose you need a driver, but once it is set up, you can use it at any computer without a driver. I have a Bluetooth USB, but I think it can't work without a driver. By just connecting it to any computer you can't find it in device list on another bluetooth device (as phone, etc).

  Read the article

• Remote Desktop Solution without VPN, with locked PC

  - by ujjain

  Sometimes I work from home and I use either of these 2 methods: Teamviewer VPN + Remote desktop When I connect with VPN I am however unable to browse any websites on my own computer, which can be very inconvenient when I am basically waiting an hour for somebody else to finish his job to do a 5 minute job. It would be nice if I could still continue browsing. A solution for this is Teamviewer. With Teamviewer I can manage the other computer, without suffering the restrictions of using the VPN. Everybody in the working area however, can see me using my computer remotely and this is not a good situation either, especially during work hours. I would like a solution that allows me to continue browsing normally and still control my remote workstation, without other people seeing every move I make on the workstation.

  Read the article

• Windows PC's Intermittant Network faults.

  - by Kristiaan

  Hello everyone, im running into some issues with our client PC's (windows xp sp3 systems). this morning we ran into some problems with PC's not connecting to internal / external systems intermittantly. this would manifest as a problem connecting to any service, email, web, backoffice database systems etc. given a random amount of time be it a few minutes etc the problem would disapear and the pc would carry on as normal, some systems however have not been able to connect to certain sytems since the problem initally happened. im hoping for some suggestions / network diag advice really to help me locate the cause of this problem. all the clients are windows xp, connecting to a domain controller that is windows 2003 std this server also acts as a DNS server for us. we also have websense 7.0.1 installed on it to filter traffic.

  Read the article

• Installing OpenVPN on Windows7

  - by Darcara

  It seems I cannot install the current version of OpenVPN (2.1.2) because the TAP driver is not signed and therefore windows 7 x64 refuses to install it. It shows up in the device manager, but with a yellow exclamation mark. It's a fresh system, and OpenVPN was never installed before. When I start the OpenVPN client it seems to connect fine, but then it stops with CreateFile failed on TAP device: ... All TAP-Win32 adapters on this system are currently in use. How can I install the unsigned drivers, or are there signed drivers available somewhere ?

  Read the article

• Access denied for user 'diduser'@'localhost' to database 'diddata' (1044, 42000)

  - by Arlen Beiler

  I am trying to setup a MySQL server and when I went to create a second user it wouldn't give it permissions for the database. I can connect fine as long as I don't specify a database. Access denied for user 'user'@'localhost' to database 'diddata' The connection details are: { 'host' : 'localhost', 'user' : 'user', 'password' : 'password' , 'database': 'diddata' }; And to create the DB and table I did: CREATE DATABASE IF NOT exists diddata; CREATE USER 'user'@'localhost' IDENTIFIED BY 'password'; GRANT ALL ON user.* TO 'user'@'localhost'; Note that I've changed the username and password in this question. I've already checked the privileges in MySQL workbench and they are there.

  Read the article

• freebsd dev server on virtualbox over windows

  - by g_kaya

  I need a unixy environment for development purposes. I hate doing things on windows but it is more stable for daily use and I don't have a mac, so I'm having to use windows (7). I want to run freebsd in a virtual machine, configure it to be the localhost server, be able to connect using ssh (within my home-network) and be able to install vbox guest addons. If guest additions aren't the best, I can use solaris or linux flavours. I need no gui. I don't know anything about network stuff, so I need a detailed explanation from vise people here, or a nice doc to read. Edit : To be more specific as requested, I use following on unices: *django 1.4 *apache *python (2.7) *emacs *mysql *probably node.js *bash scripting I use windows to be able to do daily things easily, like connecting to my tablet, browsing and learning java. And I don't want to use linux as my desktop os, beacuse it gets broken a lot, it's annoying to maintain wlan problems and some more.

  Read the article

• IPSec VPN IP addresses

  - by Randomblue

  I have an IPSec VPN on my Windows 7 machine (all using the native Windows 7 gateway). The host I am connecting to has different ISAKMP "Phase 1" and "Phase 2" IP addresses. As I understand, the Phase 1 address is that of the IPsec endpoint, to which I can connect just fine. The Phase 2 address is found in their "crypto map", and the addresses need to match. At the moment, both my Phase 1 and Phase 2 addresses are configured the same. On my side, I get the error "Error 791: The L2TP connection attempt failed because security policy for the connection was not found" How can I configure the Phase 2 IP address for my Windows 7 IPSec VPN to be different to the IPSec endpoint address?

  Read the article

< Previous Page | 414 415 416 417 418 419 420 421 422 423 424 425  | Next Page >