Search Results

Search found 36698 results on 1468 pages for 'old linux fan'.

Page 419/1468 | < Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >

  • Large file copy from NFS to local disk performance drop

    - by Bernhard
    I'm trying to copy a 200GB file from an NFS mount to a local disk. The local disk is an XFS filesystem on a LVM on top of a RAID 5 system (hardware RAID controler). I'm using rsync to monitor the transfer speed. At the beginning the IO speed is about 200MB/s, stable for the first 18GB. But then the performance drops by a factor of 10-20 and never recovers to the initial rate. Sometimes it reaches about 50-100MB/s but just for a few seconds and then the process seems to hang for a bit. At the same time all file-stat operations on the target filesystem are blocking for a long time (minutes). Also interrupting the copy process blocks for several minutes, a sub-sequent delete of the partly copied file takes also several minutes. Any ideas what could be causing this?

    Read the article

  • =?UTF-8?B??= in Emails sent via php mail problem

    - by Camran
    I have a website, and in the "Contact" section I have a form which users may fill in to contact me. The form is a simple form which action is a php page. The php code: $to = "[email protected]"; $name=$_POST['name']; // sender name $email=$_POST['email']; // sender email $tel= $_POST['tel']; // sender tel $subject=$_POST['subject']; // subject CHOSEN FROM DROPLIST, ALL TESTED $text=$_POST['text']; // Message from sender $text.="\n\nTel:".$tel; // Added to message to show me the telephone nr to the sender at bottom of message $headers="MIME-Version: 1.0"."\n"; $headers.="Content-type: text/plain; charset=UTF-8"."\n"; $headers.="From: $name <$email>"."\n"; mail($to, '=?UTF-8?B?'.base64_encode($subject).'?=', $text, $headers, '[email protected]'); Could somebody please tell me why this works most of the time, but sometimes I receive email whith no text and the subject line showing =?UTF-8?B??= I use outlook express, and I have read this http://stackoverflow.com/questions/454833/system-net-mail-and-utf-8bxxxxx-headers but it didn't help. The problem is not in Outlook, because when I log in to the actual mailprogram where I fetch the POP3 emails from, the email looks the same. When I right click in Outlook and chose "message source" then there is no "From" information. Ex, a good message should look like this: Subject: =?UTF-8?B?w5Z2cmlndA==?= MIME-Version: 1.0 Content-type: text/plain; charset=UTF-8 From: John Doe However, the ones with problem looks like this: Subject: =?UTF-8?B??= MIME-Version: 1.0 Content-type: text/plain; charset=UTF-8 From: As if the information has been lost somewhere. You should know also that I have a VPS, which I manage myself. I use postfix as an emailserver, if thats got anything to do with it. But then again, why does it work sometimes? Also another thing that I have noticed is that sometimes special characters are not shown correctly (by both Outlook and the webmail). For instance, the name "Björkman" in swedish is shown like Björkman, but again, only sometimes. I hope anybody knows something about this problem, because it is very hard to track down for me atleast. If you need more input let me know.

    Read the article

  • VPN on a ubuntu server limited to certain ips

    - by Hultner
    I got an server running Ubuntu Server 9.10 and I need access to it and other parts of my network sometimes when not at home. There's two places I need to access the VPN from. One of the places to an static IP and the other got an dynamic but with DynDNS setup so I can always get the current IP if I want to. Now when it comes to servers people call me kinda paranoid but security is always my number one priority and I never like to allow access to the server outside the network therefor I have two things I have to have on this VPN. One it shouldn't be accessiable from any other IP then these 2 and two it has to use a very secure key so it will be virtually impossible to bruteforce even from the said IP´s. I have no experience what so ever in setting up VPNs, I have used SSH tunneling but never an actuall VPN. So what would be the best, most stable, safest and performance effiecent way to set this up on a Ubuntu Server? Is it possible or should I just set up some kind of SSH Tunnel instead? Thanks on beforehand for answers.

    Read the article

  • Create kickstart configuration file from existing configuration.

    - by ÜMineiro
    Is there a script or another way to automatically generate a kickstart configuration file from the system state of an existing server so that the file can be use to replicate (not clone) the configuration of the system in another install? I know that the anaconda-ks.cfg file is stored on the /root dir. but the system in question have been extensively changed since it's installation, and the file is of no use now.

    Read the article

  • How to tell if OpenGL is really working in Ubuntu 10.04

    - by Jonathan
    I have a lenovo S9e running Intel integrated graphics. Here is my lspci output related to the graphics: 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) Subsystem: Lenovo Device 3870 Flags: bus master, fast devsel, latency 0 Memory at f0580000 (32-bit, non-prefetchable) [size=512K] Capabilities: [d0] Power Management version 2 I want to know how I can make sure OpenGL support is running in full on an Ubuntu 10.04 installation. I have a few hints to think that it is not: The "Desktop Effects" will not load Apps such as stardock, when attempting to use OpenGL rendering, will display black boxes instead of transparency In the games Pioneers, the number-tile icons are suspiciously just black circles Windows games running with Wine will only support software rendering, not hardware rendering When I boot into a Knoppix LiveCD, the desktop effects do work, splendidly, meaning compiz detects my computer as capable. My problem with troubleshooting is that Canonical has basically eliminated the conf-file-based mechanism of X11 as far as I can tell, thus making it even harder to ensure graphics modules are loading properly. How do I debug and test OpenGL on m Ubuntu 10.04 installation?

    Read the article

  • recursively "normalize" filenames

    - by user66732
    i have made a script, that can recursively rename files to get rid of special chars, etc. in filenames e.g.: before: THIS i.s my file (1).txt after running the script: This-i-s-my-file-1.txt Ok. here it is: But: when i wanted to test it "fully", with filenames like this: ¤¥¦§¨©ª«¬®¯°±²³´µ¶·¸¹º»¼½¾¿ÀÂÃÄÅÆÇÈÊËÌÎÏÐÑÒÔÕרÙUÛUÝÞßàâãäåæçèêëìîïðñòôõ÷øùûýþÿ.txt áíüuúöoóéÁÍÜUÚÖOÓÉ!"#$%&'()*+,:;<=>?@[\]^_`{|}~€‚ƒ„…†‡ˆ‰Š‹ŒŽ‘’“”•–—˜™š›œžŸ¡¢£.txt it fails: $ sh renamer.sh directorythathasthefiles mv: cannot stat `./áíüuúöoóéÁÍÜUÚÖOÓÉ!"#$%&\'()*+,:;<=>?@[]^_`{|}~€‚ƒ„…†‡ˆ‰Š‹ŒŽ‘’“”•–—˜™š›œžŸ¡¢£': No such file or directory mv: cannot stat `./áíüuúöoóéÁÍÜUÚÖOÓÉ!"#$%&\'()*+,:;<=>?@[]^_`{|}~€‚ƒ„…†‡ˆ‰Š‹ŒŽ‘’“”•–—˜™š›œžŸ¡¢£': No such file or directory mv: cannot stat `./áíüuúöoóéÁÍÜUÚÖOÓÉ!"#$%&\'()*+,:;<=>?@[]^_`{|}~€‚ƒ„…†‡ˆ‰Š‹ŒŽ‘’“”•–—˜™š›œžŸ¡¢£': No such file or directory mv: cannot stat `./áíüuúöoóéÁÍÜUÚÖOÓÉ!"#$%&\'()*+,:;<=>?@[]^_`{|}~€‚ƒ„…†‡ˆ‰Š‹ŒŽ‘’“”•–—˜™š›œžŸ¡¢£': No such file or directory mv: cannot stat `./áíüuúöoóéÁÍÜUÚÖOÓÉ!"#$%&\'()*+,:;<=>?@[]^_`{|}~€‚ƒ„…†‡ˆ‰Š‹ŒŽ‘’“”•–—˜™š›œžŸ¡¢£': No such file or directory mv: cannot stat `./áíüuúöoóéÁÍÜUÚÖOÓÉ!"#$%&\'()*+,:;<=>?@[]^_`{|}~€‚ƒ„…†‡ˆ‰Š‹ŒŽ‘’“”•–—˜™š›œžŸ¡¢£': No such file or directory ...and so on so "mv" can't handle special chars.. :\ i worked on it for many hours.. does anyone has a working one? [that can handle chars [filenames] in that 2 lines too?] Q on pastebin: http://pastebin.com/raw.php?i=19iYZpwY

    Read the article

  • recursively "normalize" filenames

    - by user62367
    i mean getting rid of special chars in filenames, etc. i have made a script, that can recursively rename files [http://pastebin.com/raw.php?i=kXeHbDQw]: e.g.: before: THIS i.s my file (1).txt after running the script: This-i-s-my-file-1.txt Ok. here it is: But: when i wanted to test it "fully", with filenames like this: ¤¥¦§¨©ª«¬®¯°±²³´µ¶·¸¹º»¼½¾¿ÀÂÃÄÅÆÇÈÊËÌÎÏÐÑÒÔÕרÙUÛUÝÞßàâãäåæçèêëìîïðñòôõ÷øùûýþÿ.txt áíüuúöoóéÁÍÜUÚÖOÓÉ!"#$%&'()*+,:;<=>?@[\]^_`{|}~€‚ƒ„…†‡ˆ‰Š‹ŒŽ‘’“”•–—˜™š›œžŸ¡¢£.txt it fails [http://pastebin.com/raw.php?i=iu8Pwrnr]: $ sh renamer.sh directorythathasthefiles mv: cannot stat `./áíüuúöoóéÁÍÜUÚÖOÓÉ!"#$%&\'()*+,:;<=>?@[]^_`{|}~€‚ƒ„…†‡ˆ‰Š‹ŒŽ‘’“”•–—˜™š›œžŸ¡¢£': No such file or directory mv: cannot stat `./áíüuúöoóéÁÍÜUÚÖOÓÉ!"#$%&\'()*+,:;<=>?@[]^_`{|}~€‚ƒ„…†‡ˆ‰Š‹ŒŽ‘’“”•–—˜™š›œžŸ¡¢£': No such file or directory mv: cannot stat `./áíüuúöoóéÁÍÜUÚÖOÓÉ!"#$%&\'()*+,:;<=>?@[]^_`{|}~€‚ƒ„…†‡ˆ‰Š‹ŒŽ‘’“”•–—˜™š›œžŸ¡¢£': No such file or directory mv: cannot stat `./áíüuúöoóéÁÍÜUÚÖOÓÉ!"#$%&\'()*+,:;<=>?@[]^_`{|}~€‚ƒ„…†‡ˆ‰Š‹ŒŽ‘’“”•–—˜™š›œžŸ¡¢£': No such file or directory mv: cannot stat `./áíüuúöoóéÁÍÜUÚÖOÓÉ!"#$%&\'()*+,:;<=>?@[]^_`{|}~€‚ƒ„…†‡ˆ‰Š‹ŒŽ‘’“”•–—˜™š›œžŸ¡¢£': No such file or directory mv: cannot stat `./áíüuúöoóéÁÍÜUÚÖOÓÉ!"#$%&\'()*+,:;<=>?@[]^_`{|}~€‚ƒ„…†‡ˆ‰Š‹ŒŽ‘’“”•–—˜™š›œžŸ¡¢£': No such file or directory mv: cannot stat `./áíüuúöoóéÁÍÜUÚÖOÓÉ!"#$%&\'()*+,:;<=>?@[]^_`{|}~€‚ƒ„…†....and so on $ so "mv" can't handle special chars.. :\ i worked on it for many hours.. does anyone has a working one? [that can handle chars [filenames] in that 2 lines too?]

    Read the article

  • What can cause peaks in pagetables in /proc/meminfo ?

    - by Fuzzy76
    I have a gameserver running Debian Lenny on a VPS host. Even when experiencing a fairly low load, the players start experiencing major lag (ping times rise from 50 ms to 150-500 ms) in bursts of 3 - 10 seconds. I have installed Munin server monitoring, but when looking at the graphs it looks like the server has plenty of CPU, RAM and bandwidth available. The only weird thing I noticed is some peaks in the memory graph attributed to "page_tables" which maps to PageTables in /proc/meminfo but I can't find any good information on what this might mean. Any ideas what might be causing this? If you need any more graps, just let me know. The interrupts/second count is at roughly 400-600 during this period (nearly all from eth0). The drop in committed was caused by me trying to lower the allocated memory for the server from 512MB to 256MB, but that didn't seem to help.

    Read the article

  • how to use iptables to block the IP of device connected to openwrt router

    - by scola
    I have two routers(A,B).the A connect to internet with IP:192.168.1.1 The openwrt router B connect the lan of A by bridge with static IP:192.168.1.111. I am learning to use iptables to control the devices connected to B(wlan) . I use my phone to connect wifi of B,the phone's IP is IP:192.168.1.100.it can surf the internet normally. I want to block the phone's IP to make the phone can not connect to internet. refer to http://bredsaal.dk/some-small-iptables-on-openwrt-tips iptables -A input_wan -s 192.168.1.100 --jump REJECT iptables -A forwarding_rule -d 192.168.1.100 --jump REJECT but it do not work.the phone still connect to internet normally. and I tried other chain(INPUT,OUTPUT,FORWARD).so many chains confused me. iptables -I OUTPUT -o br-lan -s 192.168.1.100 -j DROP and it do not work again. I'm sure that the iptables have no problem. root@OpenWrt:/etc# iptables -L|grep Chain Chain INPUT (policy ACCEPT) Chain FORWARD (policy DROP) Chain OUTPUT (policy ACCEPT) Chain forward (1 references) Chain forwarding_lan (1 references) Chain forwarding_rule (1 references) Chain forwarding_wan (1 references) Chain input (1 references) Chain input_lan (1 references) Chain input_rule (1 references) Chain input_wan (1 references) Chain output (1 references) root@OpenWrt:/etc# ifconfig br-lan Link encap:Ethernet HWaddr 0C:82:68:97:57:BA inet addr:192.168.1.111 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::e82:68ff:fe97:57ba/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:14976 errors:0 dropped:0 overruns:0 frame:0 TX packets:7656 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2851980 (2.7 MiB) TX bytes:1902785 (1.8 MiB) eth0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:58201 errors:0 dropped:11 overruns:0 frame:0 TX packets:45012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:54591348 (52.0 MiB) TX bytes:5711142 (5.4 MiB) Interrupt:4 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:312 errors:0 dropped:0 overruns:0 frame:0 TX packets:312 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:39961 (39.0 KiB) TX bytes:39961 (39.0 KiB) mon.wlan0 Link encap:UNSPEC HWaddr 0C-82-68-97-57-BA-00-48-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4900 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:1223807 (1.1 MiB) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 0C:82:68:97:57:BA UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:37346 errors:0 dropped:0 overruns:0 frame:0 TX packets:49662 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:32 RX bytes:3808021 (3.6 MiB) TX bytes:54486310 (51.9 MiB) root@OpenWrt:/etc/config# cat network config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'lan' option 'ifname' 'eth0' option 'type' 'bridge' option 'proto' 'static' option 'ipaddr' '192.168.1.111' option 'netmask' '255.255.255.0' option 'gateway' '192.168.1.1' option dns 192.168.1.1 and how to use iptables to control the network of wlan? Thanks in advance and sorry for poor English.

    Read the article

  • Ubuntu hardware wireless switch has no effect after suspend and 13.10 upgrade

    - by blaineh
    I'm posting this on SU after it stalled on askubuntu. I hope someone here can help! If you'd prefer to answer on AU itself, here's the link: http://askubuntu.com/questions/365177/hardware-wireless-switch-has-no-effect-after-suspend-and-13-10-upgrade Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Edit. This morning, I had had the laptop suspended all night, and then when I tried to awake it, it simply wouldn't. It would try, and then it would sleep again (I guess it felt a little bit like me! </badjoke>). Is it possible these problems are related? Edit. I don't have enough reputation on SU proper to post links to pastebins and other questions I've tried, so I'm putting them in comments, and of course they're available in the original question.

    Read the article

  • how're routing tables populated?

    - by Robbie Mckennie
    i've been reading "tcp/ip illustrated" and i started reading about ip forwarding. all about how you can receive a datagram and work out where to send it next based on the desination ip and your routing table. but what confused me is how (in a home network setting) the table itself is populated. is there a lower layer protocol at work here? does it come along with dhcp? or is it simply based on the ip address and netmask of each interface? i do know (from other books) that in the early days of ethernet one had to set up routing tables by hand, but i know i didn't do that.

    Read the article

  • How to get Bash shell history range

    - by Aniti
    How can I get/filter history entries in a specific range? I have a large history file and frequently use history | grep somecommand Now, my memory is pretty bad and I also want to see what else I did around the time I entered the command. For now I do this: get match, say 4992 somecommand, then I do history | grep 49[0-9][0-9] this is usually good enough, but I would much rather do it more precisely, that is see commands from 4972 to 5012, that is 20 commands before and 20 after. I am wondering if there is an easier way? I suspect, a custom script is in order, but perhaps someone else has done something similar before.

    Read the article

  • Disadvantages of not having a swap partition

    - by Bo Tian
    I recently installed Ubuntu 10.04 on my laptop. Due to space constraint of the SSD, I did not set a swap partition for the OS, and I have 1.5GB of RAM. There's a warning during installation, but I think it's not a big deal since everything went smoothly. For the long term, would there be any drawbacks of not having a swap partition?

    Read the article

  • Cobbler 2.2.2 problems

    - by Peter
    I have setup a dedicated LAN for Cobbler tests. My setup is: Cobbler server: openSUSE 12.3, cobbler 2.2.2 (from openSUSE repos) Imported distros: Centos 6.5, Red Hat 6.5, Red Hat 7.0, openSUSE 13.1 Target Machine: VMs in a Windows 7 Virtualbox Systems provisioning works OK, but I have some problems. The first one is that cobbler does not honor the "pxe_just_once: 1" setting. When the setup of the target OS is finished, after the reboot the target systems continues to PXE boot! The second problem is that the target server is not correctly configured! See my setup: cobbler system report --name=test Name : test TFTP Boot Files : {} Comment : Fetchable Files : {} Gateway : 192.168.0.1 Hostname : testcob1.example.com Image : IPv6 Autoconfiguration : False IPv6 Default Device : Kernel Options : {} Kernel Options (Post Install) : {} Kickstart : <<inherit>> Kickstart Metadata : {} LDAP Enabled : False LDAP Management Type : authconfig Management Classes : [] Management Parameters : <<inherit>> Monit Enabled : False Name Servers : ['192.168.0.1', '8.8.8.8'] Name Servers Search Path : [] Netboot Enabled : False Owners : ['admin'] Power Management Address : Power ID : Power Password : Power Management Type : ipmitool Power Username : Profile : RHEL-6.5-x86_64 Proxy : <<inherit>> Red Hat Management Key : <<inherit>> Red Hat Management Server : <<inherit>> Repos Enabled : False Server Override : <<inherit>> Status : testing Template Files : {} Virt Auto Boot : <<inherit>> Virt CPUs : <<inherit>> Virt Disk Driver Type : <<inherit>> Virt File Size(GB) : <<inherit>> Virt Path : <<inherit>> Virt RAM (MB) : <<inherit>> Virt Type : <<inherit>> Interface ===== : eth0 Bonding Opts : Bridge Opts : DHCP Tag : DNS Name : Master Interface : Interface Type : IP Address : 192.168.0.200 IPv6 Address : IPv6 Default Gateway : IPv6 MTU : IPv6 Secondaries : [] IPv6 Static Routes : [] MAC Address : Management Interface : True MTU : Subnet Mask : 255.255.255.0 Static : True Static Routes : [] Virt Bridge : So, although I have setup the hostname and the network interface of the target system, after the setup, the hostname is set to localhost.localdomain and eth0 is configured as a DHCP not static! How can I find the problem and fix it? Note that I have synced and restarted cobbler a couple of times, but the problems persists.

    Read the article

  • SSH issues: Read from socket failed: Connection reset by peer

    - by nitins
    I compiled OpenSSH_6.6p1 on one of our server. I am able login via SSH to the upgraded server. But I am not able to connect to other servers running OpenSSH_6.6p1 or OpenSSH_5.8 from this. While connecting I am getting an error as below. Read from socket failed: Connection reset by peer On the destination server in the logs, I am seeing it as below. sshd: fatal: Read from socket failed: Connection reset by peer [preauth] I tried specifying the cipher_spec [ ssh -c aes128-ctr destination-server ] as mentioned in here and was able to connect. How can configure ssh to use the cipher by default? Why is the cipher required here?

    Read the article

  • Using cookies with lynx

    - by XXL
    lynx -cfg=cfg.file $URL this works with the following contents of the .cfg file: SET_COOKIES:TRUE ACCEPT_ALL_COOKIES:TRUE PERSISTENT_COOKIES:TRUE COOKIE_FILE:cookie.file however, this does not: lynx -cookies=1 -accept_all_cookies=1 -cookie_file=cookie.file $URL if it's going to be of any help - here's the trace: parse_arg(arg_name=-cookies=1, mask=1, count=2) parse_arg lookup(cookies=1) ...skip (mask 1/4) parse_arg(arg_name=-accept_all_cookies=1, mask=1, count=3) parse_arg lookup(accept_all_cookies=1) ...skip (mask 1/4) parse_arg(arg_name=-cookie_file=cookie.file, mask=1, count=4) parse_arg lookup(cookie_file=cookie.file) ...skip (mask 1/4) parse_arg(arg_name=$URL, mask=1, count=5) parse_arg startfile:$URL obvious question, why? the actual difference, from what i see, is the inability to trigger "PERSISTENT_COOKIES:TRUE" by command-line options in lynx. or, maybe, i have overlooked/misunderstood something?

    Read the article

  • Harddisk formatting with dd return error

    - by Usman Ajmal
    Hi, I tried to format my harddisk (160 GB) with the following command dd if=/dev/zero of=/dev/sda After some 3 hours, following error came up: dd: writing to '/dev/sda' : No space left on device 312581809+0 records in 312581808+0 records out 160041885696 bytes (160 GB) copied, 10708.3 s, 14.9 MB/s Any idea what went wrong?

    Read the article

  • Can't work with server after modifying /lib/libc.so.6

    - by Afshin
    I have a CentOS server, VPS. After running this command I can't work with server and get the same error in all actions (SSH, Login, ls and ...) The command: ln -s /lib/libc.so.1 /lib/libc.so.6 -f And the error is: /sbin/shutdown: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory I have VNC to server but because I can't login to server, that's unusable. Thanks in advance.

    Read the article

  • Alternative to the tee command whitout STDOUT

    - by aef
    I'm using | sudo tee FILENAME to be able to write or append to a file for which superuser permissions are required quite often. Although I understand why it is helpful in some situation, that tee also sends its input to STDOUT again, I never ever actually used that part of tee for anything useful. In most situations, this feature only causes my screen to be filled with unwanted jitter, if I don't go the extra step and manually silence it with tee 1> /dev/null. My question: Is there is a command arround, which does exactly the same thing as tee, but does by default not output anything to STDOUT?

    Read the article

  • less -Sr colourful.log How to view colourful log in less?

    - by Vi
    Both less -r (preserve terminal control sequences) and less -S (chop long lines) work well alone. But using them together breaks things. It chops too late and it wrecks the next line. Reducing COLUMNS environment variable is no op: (man less) But if you have a windowing system which supports TIOCGWINSZ or WIOCGETD, the window system's idea of the screen size takes precedence over the LINES and COLUMNS environment variables. How to view colourful logs with less? Resoved before asked: less -SR

    Read the article

  • Is there any problem using the ftpd that comes with Kerberos on CentOS?

    - by Chen Levy
    Hello, I need to configure ftpd on a CentOS 5.3 host to allow anonymous ftp (upload and download) from a well defined directory. I wish the setup to be as simple as possible, and to introduce as little new dependencies as possible. Scanning the current server configuration, I found the ftpd server that comes as part of the Kerberos workstation: > rpm -ql krb5-workstation | grep ftpd$ /usr/kerberos/sbin/ftpd Is there any reason I could or should not use this ftp server?

    Read the article

< Previous Page | 415 416 417 418 419 420 421 422 423 424 425 426  | Next Page >