Search Results

Search found 19471 results on 779 pages for 'network troubleshooting'.

Page 420/779 | < Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427  | Next Page >

• Very strange networking problem in all computers in my house

  - by Anthony

  I have three computers in my house: One desktop (wired), and two laptops (wireless). I'm using Cox Communications (yes they suck), and yesterday they had a major outage. I know it was them because I called them up when I started losing connection to the internet. All the computers can connect just fine, but they don't have internet access. It just says "local only". The weird thing is, some of them work occasionally. For the first day my laptop was working perfectly, while all the other computers couldn't connect. Later on in the day it got reversed, and the desktop was the one with internet access. By the second day the problem on Cox's end was fixed, but we still had no access. I called them up and they reset my modem, and did the usual troubleshooting stuff. It never fixed the problem, but we found out that the problem had to do with conflicting IP addresses. My router was a Linksys WRT54G and it was about 5 years old. I figured it might have gotten damaged from the outage since it was so old, and now it's having trouble "fixing itself" and giving out the proper IP addresses. So I bought a new router, a Cisco Linksys E1000. I set everything up, and still the same problem. My computer has access right now (that's how I'm writing this), but no other computers seem to be able to get access. Is there possible damage to the modem? Can someone help me please? Sorry for this being so long.

  Read the article

• Mail queue directory stuck in IIS SMTP server

  - by Loftx

  Hi there, We have an IIS SMTP server which sends out a largish number of mails (4000 or so) in batches overnight, and recently we've seen mails get "stuck" in the queue directory. Normally restarting the SMTP service seems to fix this, but it's happened a few times so I'm looking for more information. We sent out around 12,000 emails last night in 3 batches of roughly 4000. Around 10 hours later there are still 2000 or so in the queue directory which don't seem to be leaving the queue. Any new mails which appear in the queue are picked up almost immediately and sent to their destination, but these 2000 or so don't seem to move. Looking at the date modified on the emails some match up with the time they were sent, but around 1000 of them have modified dates stretching up to now. e.g. there was one mail with a date in the message headers of 5:30 this morning, but it's date modified is 11:50 and there are 3 other messages with a date modified of 11:50, then 5 with 11:49, 2 with 11:45 stretching back for a few hours and all with actual message headers far earlier. The logs for the server look like this 11:54:52 127.0.0.1 EHLO - 250 11:54:52 127.0.0.1 MAIL - 250 11:54:52 127.0.0.1 RCPT - 250 11:54:52 127.0.0.1 DATA - 250 11:54:52 127.0.0.1 QUIT - 240 11:54:53 85.115.62.190 - - 0 11:54:53 85.115.62.190 EHLO - 0 11:54:53 85.115.62.190 - - 0 11:54:53 85.115.62.190 MAIL - 0 11:54:53 85.115.62.190 - - 0 11:54:53 85.115.62.190 RCPT - 0 11:54:53 85.115.62.190 - - 0 11:54:53 85.115.62.190 DATA - 0 11:54:53 85.115.62.190 - - 0 11:54:54 85.115.62.190 - - 0 11:54:54 85.115.62.190 QUIT - 0 11:54:54 85.115.62.190 - - 0 All codes are either 250 or 240 or 0. I believe 250 and 240 indicate success, but I don't know what all the 0s are. Could someone with more experience of mail server troubleshooting give me a hand or tell me what to try next. Thanks, Tom

  Read the article

• Registry access error when Migrating ASP.NET application to IIS7

  - by fande455

  I'm running windows 7 64-bit and iis7. I'm trying to setup a web application that was previously in iis6 on XP. It's giving me the error below. I've added the network service user to the Performance Monitor Users group to no avail. Access to the registry key 'Global' is denied. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.UnauthorizedAccessException: Access to the registry key 'Global' is denied. ASP.NET is not authorized to access the requested resource. Consider granting access rights to the resource to the ASP.NET request identity. ASP.NET has a base process identity (typically {MACHINE}\ASPNET on IIS 5 or Network Service on IIS 6) that is used if the application is not impersonating. If the application is impersonating via , the identity will be the anonymous user (typically IUSR_MACHINENAME) or the authenticated request user. To grant ASP.NET access to a file, right-click the file in Explorer, choose "Properties" and select the Security tab. Click "Add" to add the appropriate user or group. Highlight the ASP.NET account, and check the boxes for the desired access.

  Read the article

• Exchange 2007 relay from sendmail, message "Undelivered". Possible reasons?

  - by garlicman

  Note: This is my re-post from Stackoverflow. I've been messing with a test environment for security purposes where a DMZ RHEL5 sendmail server is used as a relay for an Exchange 2007 server. Exchange is working in the environment, I have Vista and XP VMs using Outlook on the Domain to send e-mail to each other. I've been trying to simulate an external internet VM sending an e-mail to the DMZ sendmail relay, which forwards to the Exchange server. Before everyone thinks this is too big a problem/question, I've followed the sendmail/Exchange guides and all I want to know is how I can determine why a relayed message/e-mail in Exchange is "Undelivered". Basically I send a SMTP message to the sendmail server, which relayed to my Exchange. The /var/log/maillog shows the e-mail being relayed to Exchange. Nov 17 13:41:22 externalmailserver sendmail[9017]: pAHIfMuW009017: from=<[email protected]>, size=1233, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=[10.50.50.1] Nov 17 13:42:17 externalmailserver sendmail[9050]: pAHIfMuW009017: to=<[email protected]>, delay=00:00:55, xdelay=00:00:36, mailer=relay, pri=121233, relay=mailserver.xyz.local. [192.168.1.20], dsn=2.0.0, stat=Sent (<[email protected]> Queued mail for delivery) This is good, but the To never receives the e-mail from Exchange. So I started poking around Exchange. In the "Message Tracking" Troubleshooting Assistant I queried the processed messages and found this: (I had to copy and paste the cells... sorry for the format) 2011/11/17 RECEIVE SMTP <[email protected]> "Undelivered Mail Returned to Sender" [email protected] [email protected] 192.168.100.10 MAILSERVER\DMZ Relay [email protected] I just want to know if anyone has any suggestions on why the DMZ Relay Connector I setup isn't relaying and is instead returning the forwarded e-mail to sender as Undelivered? My Exchange Relay Receive Connector is pretty simple. The Exchange server's FQDN is set as the HELO response, all available IP addresses can receive relayed e-mail, and the IP address of my sendmail server is specifically set as a remote server.

  Read the article

• Microsoft , Hotmail , Live , MSN, Outlook , unable to send emails and no support received from microsoft in 3 months we are trying asking for that

  - by bombastic

  Ok this is somenthing unbelievable, we have a website, users sign up and receives links to confirm they signed up BUT: 1 - microsoft blocked our IP (no one with microsoft email account can receive our emails) 2 - we tryed contacting microsoft submitting the detailed form about our problem 3 - we posted 3 times in their community about our problem 4 - we tweeted they about our problem 5 - we tryed finding out some telephone support number (the few there are arent' helping at all) Do you think we solved? the answer is NO :/ We still unable to send emails from our IP to microsoft email accounts, since 3 months back. Our emails are perfect we checked all the email headers following microsoft guidelines but it seems not enought, checking our IP reputation it seems everythings ok, indeed we can send email easly to any other provider , gmail, yahoo, etc Do you know any other way to try to get help ? FULL STACK ERROR FROM MICROSOFT: host mx1.hotmail.com[65.55.37.120] said: 550 SC-001 (COL0-MC4-F28) Unfortunately, messages from 94.23.***** weren't sent. Please contact your Internet service provider since part of their network is on our block list. You can also refer your provider to http://mail.live.com/mail/troubleshooting.aspx#errors. (in reply to MAIL FROM command) We are running a Virtual Private Server , so no HOSTING SITE, using NGINX too

  Read the article

• Why can't I create a database in an empty ASP MVC 2 project using Project->Add->New Item->SQL Server

  - by Dr Dork

  I'm diving head first into ASP MVC and am playing around with creating and manipulating a database. I did a search and found this tutorial for creating a database, however when I follow it, I get this error when trying to add a new database to my fresh, empty ASP MVC 2 project... A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) The only requirement the tutorial mentioned was SQL Server Express, but when I went to download it, it said it was already installed. I'm assuming it was part of the VS 2010 RC I installed and am running. So I don't know what else I need if I am missing something. This is all new to me, so I'm sure I'm missing something obvious here and after I'm done posting this question, I plan to do some more research into the topic of databases and how they work with ASP MVC. In the meantime, I was you could help me answer a couple high level questions... What am I missing/forgetting to do that is causing this error? Any suggestions for good resources/tutorials that focus on using databases with ASP MVC? I've done a lot of database programming in the past, so I'm familiar with the concepts of relational databases and the SQL language. I wish I could find a good resource for learning how to work with them in an ASP dev environment, as well as a good breakdown of all the related technologies used for working with them (i.e. LINQ to SQL). Thanks so much in advance for all your help! I'm going to start researching these questions right now.

  Read the article

• java RMI connection to server

  - by user85116

  I have a very simple rmi client / server application. I don't use the "rmiregistry" application though, I use this to create the server: server = new RemoteServer(); registry = LocateRegistry.createRegistry(PORT); registry.bind("RemoteServer", server); The client part is: registry = LocateRegistry.getRegistry(IPADDRESS, PORT); remote = (IRemoteServer) registry.lookup("RemoteServer"); Here is the fascinating problem: The application works perfectly when both server and client are running in my (private) local network. As soon as I put the server on a public server, the application hangs for a minute, then gives me the following error: java.rmi.ServerException: RemoteException occurred in server thread; nested exception is: java.rmi.ConnectException: Connection refused to host: 192.168.x.y; nested exception is: java.net.ConnectException: Connection timed out: connect at sun.rmi.server.UnicastServerRef.dispatch(Unknown Source) at sun.rmi.transport.Transport$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) at sun.rmi.transport.Transport.serviceCall(Unknown Source) at sun.rmi.transport.tcp.TCPTransport.handleMessages(Unknown Source) at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run0(Unknown Source ... (the rest is truncated) The key I think is that the client (running on my private network) cannot connect to myself (my address is 192.168.x.y where x.y is some other numbers, but the real error message shows my ip address listed there) If I kill the rmi server on the public internet, then I instantly get a "connection refused to host: a.b.c.d") message, so I know that something at the server end is at least working. Any suggestions? EDIT: just to make this a little more clear: 192.168.x.y is the client address, a.b.c.d is the server address. The stacktrace shows the client cannot connect to the client.

  Read the article

• Designing bayesian networks

  - by devoured elysium

  I have a basic question about Bayesian networks. Let's assume we have an engine, that with 1/3 probability can stop working. I'll call this variable ENGINE. If it stops working, then your car doesn't work. If the engine is working, then your car will work 99% of the time. I'll call this one CAR. Now, if your car is old(OLD), instead of not working 1/3 of the time, your engine will stop working 1/2 of the time. I'm being asked to first design the network and then assign all the conditional probabilities associated with the table. I'd say the diagram of this network would be something like OLD -> ENGINE -> CAR Now, for the conditional probabilities tables I did the following: OLD |ENGINE ------------ True | 0.50 False | 0.33 and ENGINE|CAR ------------ True | 0.99 False | 0.00 Now, I am having trouble about how to define the probabilities of OLD. In my point of view, old is not something that has a CAUSE relationship with ENGINE, I'd say it is more a characteristic of it. Maybe there is a different way to express this in the diagram? If the diagram is indeed correct, how would I go to make the tables? Thanks

  Read the article

• Any suggestions for good automated web load testing tool?

  - by fmunkert

  What are some good automated tools for load testing (stress testing) web applications, that do not use record and replay of HTTP network packets? I am aware that there are numerous load testing tools on the market that record and replay HTTP network packets. But these are unsuitable for my purpose, because of this: The HTTP packet format changes very often in our application (e.g. when we optimize an AJAX call). We do not want to adapt all test scripts just because there is a slight change in HTTP packet format. Our test team shall not need to know any internals about our application to write their test scripts. A tool that replays HTTP packets, however, requires the team to know the format of HTTP requests and responses, such that they can adapt details of the replayed HTTP packets (e.g. user name). The automated load testing tool I am looking for should be able to let the test team write "black box" test scripts such as: Invoke web page at URL http://... . First, enter XXX into text field XXX. Then, press button XXX. Wait until response has been received from web server. Verify that text field XXX now contains the text XXX. The tool should be able to simulate up to several 1000 users, and it should be compatible with web applications using ASP.NET and AJAX.

  Read the article

• Windows 8.1 - Won't boot (0xc000000f), bcdedit fails

  - by user3014097

  I’m pretty much stuck at this point. So, backstory: Windows was installed on one of the SSDs currently in my tower. I bought a new SSD to install Windows (8.1 64 bit) on. Windows installation went fine, booted up, and formatted the old SSD from within Windows (this seems to have been a mistake, but I didn’t realize that at the time). Despite formatting the old SSD, whenever I tried to boot I was told that there were 2 Windows installations. Apparently, when I formatted the old drive, not all of the partitions were removed. So, I booted up with the repair utility, went into cmd, and deleted the non-primary partitions on the old SSD (there were 2 – think they were system and recovery, although I’m forgetting now). Reboot – computer won’t boot. Getting the 0xc000000f “The boot selection failed because a required device is inaccessible” error. Troubleshooting so far: Automatic repair doesn’t fix anything (I’ve never had luck with it though) If I go to install a new version of Windows, the drives and partitions are all there. The SSD is functioning, I at least know that. I’ve essentially gone through this guide: https://neosmart.net/wiki/recovering-windows-bootloader/ Unfortunately, I’m not getting anywhere. I’m not even entirely sure how to describe the errors I’m getting, so I’ve just included pictures of every step (I can't actually post them though so I just included a photobucket link). http://s319.photobucket.com/user/DGalt11/library/Computer%20Issue Am I completely screwed here (i.e. reformat and reinstall?)? Thanks

  Read the article

• What parts of a motherboard age, and how can I choose one with the longest possible life?

  - by Robert Harvey

  I have a home-built computer that's probably about four years old. I realize this probably seems ancient to some folks, but computers have no moving parts (except the fans), so theoretically they should last a long time, if I still have software to run on them. A few weeks ago, it began blue-screening and freezing up, with various error messages. It almost always happened about five minutes after startup. I assumed that the video card was overheating, since the cheap little fan on the heatsink died, so I replaced it. Long story short, after upgrading the video drivers a couple of times and performing some other troubleshooting, I remembered that the last time this happened, I took out the memory SIMS and cleaned the contacts with a gum eraser, so I did that again (noting that the SATA cables were very close to the chips on the SIMS). I re-routed the cables and reinstalled the SIMS. So far, so good; the machine has been trouble-free since. But blue-screens are distressing; I never know what bits are being chewed up in my OS installation when something like this happens. So I'm wondering if I'm choosing my components properly. If it matters, it's an Intel D915GAG motherboard and Corsair memory, but what I'm wondering is, should I be looking for certain characteristics when I choose these parts for my next computer, so that I can avoid this problem in my next build?

  Read the article

• Unable to logon using terminal server connection

  - by satch

  I have several W2K3 SP2 servers, admin TS enabled. I discovered this morning, I was unable to logon into some of them. I've a couple of Citrix servers in different farms, a SAP (IA64) app server and a cvs server. All of them show same sympthoms; remote connections are refused. I've been able to logon locally, and terminal server service is up, there are no users (so connections are not depleted). There are no errors in log in most servers. One of the Citrix ones, reported following errors: Event ID 50 Source TermDD Type Error Description The RDP protocol component X.224 detected an error in the protocol stream and has disconnected the client. and Event ID 1006 Source TermService Type Error Description The terminal server received large number of incomplete connections. The system may be under attack. Anyway, I suppose these errors appear because server isn't working, and Citrix users try to logon massively. (I nmap'ed server and port seems up). I've solved this problem rebooting before, but with so many servers affected it seems like a crappy workaround. Any idea about troubleshooting it properly? Thanks in advance

  Read the article

• Get Illegal Instruction error when booting Linux in VirtualBox, works fine when booted directly

  - by rkjnsn

  I have a computer on which I am dual booting Windows 7 and Gentoo Linux (both 64-bit). I want to be able to load up my Linux installation in a VM while I am booted into Windows. I have installed VirtualBox and followed the instructions for creating a raw disk VMDK. When I start the VM, Linux starts booting, but then fails with the following error when unlocking my root partition: truecrypt[441] trap invalid opcode ip:373615538e0 sp:3dd0e0dfb60 error:0 in libpixman-1.so.0[373614d6000+8d000] Everything works fine when I boot into Linux directly. What could cause an illegal instruction to be hit in libpixman only when booting in VirtualBox? Update: As a troubleshooting step, I recompiled pixman without "-march", and no longer get an illegal instruction error in that library. (The boot fails in the same spot with the same error in a different library, however.) How can I determine the specific opcode that isn't working in VirtualBox so I can disable it in my CFLAGS without having to disable all CPU-specific optimizations? I am still confused as to why there would be any user-mode instruction that would fail to work in a VM. Is this a known limitation? My CPU is an Intel Core i7 3720QM, and I have hardware virtualization support enabled.

  Read the article

• Sending email through a Google Apps account is working locally, but not on my web server...

  - by Janis Baldwin

  Related: Send Email via C# through Google Apps account My question is the same so I implemented Koistya's solution as follows. The heartbreak is that it works beautifully on my dev laptop but when ported to web server it times out with no explanation. My SMTP config is in my web.config file. I made mods based on Koistya's answer: <mailSettings> **Changed** <smtp from="[email protected]"> <network host="smtp.gmail.com" password="[password]" port="587" userName="[email protected]"/> </smtp> **Original** <!--<smtp from="[email protected]"> <network host="mail.domain.com" password="[password]" port="25" userName="[email protected]"/> </smtp>--> </mailSettings> My .Net C# code (before & after removed): SmtpClient mSmtpClient = new SmtpClient(); mSmtpClient.EnableSsl = true; mSmtpClient.Send(message); As I said this works great on my dev environment but not on web. Can anyone help? Thanks.

  Read the article

• NSMutableURLRequest wont turn on 3G

  - by Kyle

  I won't bother posting any code because my code works fine when I launch Safari or something that turns on the 3G connection first. When I put it Airport mode, then put back OFF, I will get the behavior of a connection error saying No internet connection with NSMutableURLRequest. I've personally mailed apple about how the Ant gets turned on and off, and they said anything that uses their base CFSocketStream object will turn on the Ant, and I quote: "such as NSURLRequest".. BSD Sockets do not, just so everyone knows.. However, I assumed NSMutableURLRequest would fall into the category of 'Does', but it seems like it doesnt. It never succeeds for me when I cycle Airport or have the phone idle for a long time. It will ALWAYS succeed when I open any other network app first to turn the Ant on. Shall I be forced to do a dummy NSURLRequest call to turn this on; or has anyone been able to get this class working just fine? Remember this is just an implementation of NSMutableURLRequest to upload a file Async, and no other Network operations are performed anywhere; no ads, no version checks, no nothing.

  Read the article

• Threads, Sockets, and Designing Low-Latency, High Concurrency Servers

  - by lazyconfabulator

  I've been thinking a lot lately about low-latency, high concurrency servers. Specifically, http servers. http servers (fast ones, anyway) can serve thousands of users simultaneously, with very little latency. So how do they do it? As near as I can tell, they all use events. Cherokee and Lighttpd use libevent. Nginx uses it's own event library performing much the same function of libevent, that is, picking a platform optimal strategy for polling events (like kqueue on *bsd, epoll on linux, /dev/poll on Solaris, etc). They all also seem to employ a strategy of multiprocess or multithread once the connection is made - using worker threads to handle the more cpu intensive tasks while another thread continues to listen and handle connections (via events). This is the extent of my understanding and ability to grok the thousand line sources of these applications. What I really want are finer details about how this all works. In examples of using events I've seen (and written) the events are handling both input and output. To this end, do the workers employ some sort of input/output queue to the event handling thread? Or are these worker threads handling their own input and output? I imagine a fixed amount of worker threads are spawned, and connections are lined up and served on demand, but how does the event thread feed these connections to the workers? I've read about FIFO queues and circular buffers, but I've yet to see any implementations to work from. Are there any? Do any use compare-and-swap instructions to avoid locking or is locking less detrimental to event polling than I think? Or have I misread the design entirely? Ultimately, I'd like to take enough away to improve some of my own event-driven network services. Bonus points to anyone providing solid implementation details (especially for stuff like low-latency queues) in C, as that's the language my network services are written in.

  Read the article

• IPv6 Routing / Subnetting

  - by nappo

  Recently I have installed Citrix Xen Server 6.2 on a machine. My Provider (Hetzner) gave me the IPv6 Subnet 2a01:4f8:200:xxxx::/64. Followed an article in the providers wiki (1) i got it working and can assign IPs to my guests (CentOS). However i can't assign a second IP to a single guest - it will result in a timeout. I'm not very familiar with IPv6 routing / subnetting - any help or tips for further troubleshooting is welcome! My Setup: XenServer 6.2 IPv6: 2a01:4f8:200:xxxx::2/112 ip -6 route: 2a01:4f8:200:xxxx::/112 dev xenbr0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 0 fe80::1 dev xenbr0 metric 1024 mtu 1500 advmss 1440 hoplimit 0 default via fe80::1 dev xenbr0 metric 1024 mtu 1500 advmss 1440 hoplimit 0 Guest 1 IPv6: 2a01:4f8:200:xxxx::3/64 IPv6: 2a01:4f8:200:xxxx::4/64 ip -6 route: 2a01:4f8:200:xxxx::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 proto kernel metric 256 mtu 1500 advmss 1440 hoplimit 4294967295 default via fe80::1 dev eth0 metric 1 mtu 1500 advmss 1440 hoplimit 4294967295 Guest 2 IPv6: 2a01:4f8:200:xxxx::5/64 Guest 1 IPv6 is working fine, Guest 2 too. As suggested by the wiki article (1) i split my /64 network into a /112. Is it right to set the host /112 and the guests /64? Why is that?

  Read the article

• NTLM Authentication fails when behind Proxy server

  - by Jan Petersen

  Hi All, I've seen a number of post about consuming Web Services from behind a proxy server, but none that seams to address this problem. I'm building a desktop application, using Java, JAX-WS in NetBeans. I have a working prototype, that can query the server for authentication mode, successfully authenticate and retrieve a list of web site. However, if I run the same app from a network that is behind a proxy server (the proxy does not require authentication), then I'm running into trouble. I have sniffed the traffic, and noticed the following: Behind Proxy # Result Protocol Host URL 1 200 HTTP host.domain.com /_vti_bin/Authentication.asmx 2 401 HTTP host.domain.com /_vti_bin/Webs.asmx 3 401 HTTP host.domain.com /_vti_bin/Webs.asmx 4 401 HTTP host.domain.com /_vti_bin/Webs.asmx 5 401 HTTP host.domain.com /_vti_bin/Webs.asmx Without Proxy # Result Protocol Host URL 1 200 HTTP host.domain.com /_vti_bin/Authentication.asmx 2 401 HTTP host.domain.com /_vti_bin/Webs.asmx 3 401 HTTP host.domain.com /_vti_bin/Webs.asmx 4 401 HTTP host.domain.com /_vti_bin/Webs.asmx 5 401 HTTP host.domain.com /_vti_bin/Webs.asmx 6 200 HTTP host.domain.com /_vti_bin/Webs.asmx When running the code from a network without a proxy server, I successfully Authentication with the server, but when I'm behind the proxy server, the traffic is cut-off at the 5th message, and thus don't succeed. I know from the Java docs that On Microsoft Windows platforms, NTLM authentication attempts to acquire the user credentials from the system without prompting the user's authenticator object. If these credentials are not accepted by the server then the user's authenticator will be called. Given that my Authentication code is called only ones, and only as the 5th attempt, it appears as if the connection is dropped when behind the proxy server before my Authentication object is used. Is there any way I can control the behavior of Authentication module, to not have it use the system credentials? I have put the source text java class files of a demo app up, showing the issue at the following urls (it's a bit to long even in the short demo form to post here). link text Br Jan

  Read the article

• VirtualBox: Can't get Bridged Networking to work (Win7 host)

  - by MikeTheTall

  I'm trying to set up a virtual LAMP server, including sharing files between the guest OS (Ubuntu Server) and the host OS (Windows 7) using samba. I think my problem is that I can't get Bridged (or Host-Only) networking to work in VirtualBox. I can boot the Linux VM just fine with NAT, but then can't access any services on it directly (except after port-forwarding port 80)(my understanding is that port-forwarding works because I'm not running a web server on the host OS, and therefore it can forward traffic to the unused port 80). I don't think that port-forwarding samba traffic (from the host to the guest) will work since I think that the host OS is using those ports. When I turn off NAT and turn bridged networking on I get an error. The VM fails to boot, with a dialog popping up (title: VirtualBox - Error) that says "Failed to open a session for the virtual machine UbuntuServer. Configuration error: Failed to get MAC address (VERR_CFGM_VALUE_NOT_FOUND). I'm hoping that once this is resolved then samba will work ok :) Any advice on this would be great (how to fix it would be wonderful, next steps for troubleshooting would be great, too :) )

  Read the article

• Some HTTPS connections via NAT fail, but work on firewall itself.

  - by hnxn

  Hi, I am having trouble establishing some HTTPS connections from internal machines, even though these same connections work if initiated on the firewall itself. The firewall machine is running Ubuntu 10.04.1 and shorewall 4.4.6. The internet connection is Bell PPPoE DSL (in Canada). I have tried various MTU settings, it doesn't seem to make any difference. Other protocols (HTTP, FTP, etc) generally work. The problem seems to be limited to certain sites; this one never works from an internal machine, but always works from the firewall itself: From internal machine: $ wget https://images.fedex.com/images/ascend/shared/headers/nxgen/corp_logo.gif --2011-01-13 20:51:31-- https://images.fedex.com/images/ascend/shared/headers/nxgen/corp_logo.gif Resolving images.fedex.com... 184.24.96.69 Connecting to images.fedex.com|184.24.96.69|:443... connected. ^C From firewall: $ wget https://images.fedex.com/images/ascend/shared/headers/nxgen/corp_logo.gif --2011-01-13 20:58:28-- https://images.fedex.com/images/ascend/shared/headers/nxgen/corp_logo.gif Resolving images.fedex.com... 184.24.96.69 Connecting to images.fedex.com|184.24.96.69|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 840 [image/gif] Saving to: `corp_logo.gif' 2011-01-13 20:58:28 (149 MB/s) - `corp_logo.gif' saved [840/840] This URL always works from both internal and firewall: https://encrypted.google.com/images/logos/ssl_logo_lg.gif Any troubleshooting tips would be greatly appreciated!

  Read the article

• How to configure outgoing connections from an SQL stored procedure?

  - by Peter Vestberg

  I am working on a .NET project which uses Microsoft SQL server. In this project, I need a CLR stored procedure (written in C#) that uses a remote web service. So, when the stored procedure is executed on the SQL server, it makes web service calls and thus sends packets to a remote location. The problem is that when executing the SP I get: "System.Net.WebException: The request failed with HTTP status 403: Forbidden." The database user has full permission, the deployed CLR assembly and SP are even marked "unsafe", I tried signing it etc., so any of that is not causing the problem. When I am executing the very same C# code, but from a simple console application instead of as a SP, it all works fine. So I started to suspect a network related problem and had a packet sniffer running when executing both the SP and the console app version. What I realized was that the packets sent out had different destination IP addresses: the console app sent the packets directly to the web service IP while the SP sent the packets to a proxy server we use in our company. Due to network policies the latter is not allowed and that explains the "403 Forbidden" exception. So my question boils down to this: How can I configure the SP/MS SQL server to NOT use that proxy? I want it to send the packets directly to the web service IP, just like the test console app. (again, the C# code is the same , so it's not a programming matter). I've disabled all proxy settings in Internet Explorer in case the SQL server inherits these settings or something. However, no luck. Any help would be greatly appreciated! Best regards, Peter

  Read the article

• tomcat start service NoClassDefFoundError?

  - by mobibob

  I am trying to redeploy my server on a new server with a different DNS and IP address. Therefore, I think my problem is in the configuration to find JAR files. Is there a way to get more detail as to which class is being requested so I can narrow down my problem. Does anyone have any suggested troubleshooting guidance for such problem? BTW - the configuration was working on the original server, and I tried to find all the locations in the files: conf/, worker.properties, server.xml, catalina.policy, web.xml. The jarkarta.log repeats the starting... error initializing ... forever. Very boring, therefore, the problem has to be fundamental. Apparently, the error message is recorded in the log across more than one line and would be this: Error occurred during initialization of VM java/lang/NoClassDefFoundError : java/lang/Object [2012-05-21 18:20:33] [info] Procrun (2.0.4.0) started [2012-05-21 18:20:33] [info] Running Service... [2012-05-21 18:20:33] [info] Starting service... [2012-05-21 18:20:33] [info] Error occurred during initialization of VM [2012-05-21 18:20:33] [info] java/lang/NoClassDefFoundError [2012-05-21 18:20:33] [info] : java/lang/Object [2012-05-21 18:21:59] [info] Procrun (2.0.4.0) started [2012-05-21 18:21:59] [info] Running Service... [2012-05-21 18:21:59] [info] Starting service... [2012-05-21 18:21:59] [info] Error occurred during initialization of VM [2012-05-21 18:21:59] [info] java/lang/NoClassDefFoundError [2012-05-21 18:21:59] [info] : java/lang/Object [2012-05-21 18:35:16] [info] Procrun (2.0.4.0) started [2012-05-21 18:35:16] [info] Running Service... [2012-05-21 18:35:16] [info] Starting service... [2012-05-21 18:35:16] [info] Error occurred during initialization of VM [2012-05-21 18:35:16] [info] java/lang/NoClassDefFoundError [2012-05-21 18:35:16] [info] : java/lang/Object [2012-05-21 18:45:25] [info] Procrun (2.0.4.0) started [2012-05-21 18:45:25] [info] Running Service... [2012-05-21 18:45:25] [info] Starting service... [2012-05-21 18:45:25] [info] Error occurred during initialization of VM [2012-05-21 18:45:25] [info] java/lang/NoClassDefFoundError [2012-05-21 18:45:25] [info] : java/lang/Object [2012-05-21 18:46:29] [info] Procrun (2.0.4.0) started [2012-05-21 18:46:29] [info] Running Service... [2012-05-21 18:46:29] [info] Starting service... [2012-05-21 18:46:29] [info] Error occurred during initialization of VM [2012-05-21 18:46:29] [info] java/lang/NoClassDefFoundError

  Read the article

• SATA Windows 7 Problems

  - by Isaacs

  Scenario: Core 2 Duo processor, Gigabyte MB, 4 SATA Western digital 500 GB hard drives, windows 7 64 bit. Problem: Copying data from USB or among SATA hard drives is faulty. When trying to copy 20GB from one HD to another it starts off with normal ~14-15 MB/s transfer rates and eventually bogs down to < 120KB/s transfer rates. If I leave it alone over night I come back with my computer crashed and setting at BIOS detecting hard drives. Troubleshooting: Removed all but 1 HD with OS on it, everything seems to be happy. I can copy large files from USB HD to main/single HD. Ran SpinRite on all hard drives, no errors found. Tried adding one HD to machine and problem exists, tried switching SATA cables, and SATA ports on MB. Reinstalled windows 7 x2 (from different disks..). Oddly enough if I boot to a ubuntu everything works fine. Getting ready to purchase a new MB, but wanted to see if anyone had suggestions. Thanks!

  Read the article

• Using Qt signals/slots instead of a worker thread

  - by Rob

  I am using Qt and wish to write a class that will perform some network-type operations, similar to FTP/HTTP. The class needs to connect to lots of machines, one after the other but I need the applications UI to stay (relatively) responsive during this process, so the user can cancel the operation, exit the application, etc. My first thought was to use a separate thread for network stuff but the built-in Qt FTP/HTTP (and other) classes apparently avoid using threads and instead rely on signals and slots. So, I'd like to do something similar and was hoping I could do something like this: class Foo : public QObject { Q_OBJECT public: void start(); signals: void next(); private slots: void nextJob(); }; void Foo::start() { ... connect(this, SIGNAL(next()), this, SLOT(nextJob())); emit next(); } void Foo::nextJob() { // Process next 'chunk' if (workLeftToDo) { emit next(); } } void Bar::StartOperation() { Foo* foo = new Foo; foo->start(); } However, this doesn't work and UI freezes until all operations have completed. I was hoping that emitting signals wouldn't actually call the slots immediately but would somehow be queued up by Qt, allowing the main UI to still operate. So what do I need to do in order to make this work? How does Qt achieve this with the multitude of built-in classes that appear to perform lengthy tasks on a single thread?

  Read the article

• Convert a Relative URL to an Absolute URL in Actionscript / Flex

  - by Bear

  I am working with Flex, and I need to take a relative URL source property and convert it to an absolute URL before loading it. The specific case I am working with involves tweaking SoundEffect's load method. I need to determine if a file will be loaded from the local file system or over the network from looking at the source property, and the easiest way I've found to do this is to generate the absolute URL. I'm having trouble generating the absolute URL for sound effect in particular. Here were my initial thoughts, which haven't worked. Look for the DisplayObject that the Sound Effect targets, and use its loaderInfo property. The target is null when the SoundEffect loads, so this doesn't work. Look at FlexGlobals.topLevelApplication, at the url or loaderInfo properties. Neither of these are set, however. Look at the FlexGlobals.topLevelApplication.systemManager.loaderInfo. This was also not set. The SoundEffect.as code basically boils down to var url:String = "mySound.mp3"; /*>> I'd like to convert the URL to absolute form here and tweak it as necessary <<*/ var req:URLRequest = new URLRequest(url); var loader:Loader = new Loader(); loader.load(req); Does anyone know how to do this? Any help clarifying the rules of how relative urls are resolved for URLRequests in ActionScript would also be much appreciated. edit I would also be perfectly satisfied with some way to tell whether the url will be loaded from the local file system or over the network. Looking at an absolute URL it would just be easy to look at the prefix, like file:// or http://.

  Read the article

< Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427  | Next Page >