Search Results

Search found 11897 results on 476 pages for 'dean rather'.

Page 422/476 | < Previous Page | 418 419 420 421 422 423 424 425 426 427 428 429  | Next Page >

• Wireless Network Performance Issues

  - by colithium

  My brand new Dell XPS system has been running flawlessly except its abysmal download speeds. I have tried isolating every variable I could possibly think of but I can't figure out the problem. I've talked to Dell and Belkin without making progress (thought I'd try). Here are the speeds: Note that most of the time, upload speeds are actually much faster than download speeds (around 4.0 Mb/s which is better than most other devices on the network) It's not the ISP. The slowdown happens even when transferring files inside the network. Plus every other wireless device gets approximately this: It's not the wireless router. It's a Lynksis WRT160N v1 with the latest firmware (1.02.2). Plus everything else connected to it has normal speeds. It's not the browser. Speeds are the same in IE, FF, and when transferring files with Windows between computers. It's not the wireless adapter. I've tried a Belkin N Wireless USB Adapter (which works fine on another computer) and a Dell Wireless Draft 802.11n WLAN Mini-Card. They have the same slow speeds when connected to the problem computer. It's not the adapter connection. One adapter used USB and the other is a Mini-Card. It's not antenna placement. With the same antenna position and the same device, I get different speeds when connected to the problem computer vs a good computer. Plus everything reports the connection speed as at least 11Mbps and good signal strength. I've tried disabling IPv6 since it sometimes causes weird problems. I've tried disabling Windows Firewall/anti-virus. I've ensured the computer has updated drivers for both adapters. I've ensured that Windows is up to date and so is the BIOS. For the USB adapter I ensured that that USB port functioned at normal speeds with other USB devices. What else could it possibly be? I finally received my copy of Windows 7 and will be trying that. I'd rather not install Windows 7 because of a particular program that will stop working so a solution besides that is welcome. Specs: Vista x64 Core i7 920 6GB RAM 500GB HD GTX 260

  Read the article

• Active Directory Corrupted In Windows Small Business Server 2011 - Server No Longer Domain Controller

  - by ThinkerIV

  I have a rather bad problem with my Windows SBS 2011. First of all, I'll give the background to what caused the problem. I was setting up a new small business server network. I had my job about finished. The server was working great, all the workstations had joined the domain, and I had all my applications and data moved to the server. I thought I was done. But then it happened. I tried adding one more computer to the domain, and to my dismay the computer name was set to the same name as the server. Apparently when a computer joins a domain with the same name as another machine that is already on the domain, it overrides the first one. For normal workstations, this is not a big deal, you just delete the computer from AD and rejoin the original computer to the domain. However, for a server that is the domain controller it is a whole different story. Since the server got overridden in AD, it is no longer the domain controller. The DNS service is not working and all kinds of other services are failing also. So the question is, what are my options? I am embarrassed to admit it, but since this is a new server one thing I did not have setup yet was backup. So I have no backups to work from. I am worried that things are broken enough that I might need to do a reinstall. However, I already have several days worth of configuration into this server, so I would obviously prefer if there was a fix that would prevent me from needing to do a reinstall. All the server components are there and installed correctly, but they are misconfigured (I think it is basically just Active Directory). So I have the feeling that if I did the right thing I could solve the issue without a reinstall. Is there anyway to rerun the component that installs the initial configuration to "convert" the base windows server 2008 r2 install into a SBS? In other words in the program files folder there is an application called SBSsetup.exe, is there anyway to rerun this and have it reconfigure AD, etc. to work with SBS? Any insight will be greatly appreciated. Thanks.

  Read the article

• Nagios shell script cannot be executed

  - by MeinAccount

  I'm trying to monitor GitLab with nagios. I've created the following command definition and shell script but when checking the service I'm receiving the following e-mail. How can I solve this? The file is executable. [...] nagios : 3 incorrect password attempts ; TTY=unknown ; PWD=/ ; USER=git ; COMMAND=/bin/bash -c /var/lib/nagios/custom_plugins/check_gitlab.sh Command definition: define command { command_name custom_check_gitlab command_line /var/lib/nagios/custom_plugins/check_gitlab.sh } Shell script: #! /bin/sh # [...] RAILS_ENV="production" # Script variable names should be lower-case not to conflict with internal /bin/sh variables such as PATH, EDITOR or SHELL. app_root="/home/git/gitlab" app_user="git" unicorn_conf="$app_root/config/unicorn.rb" pid_path="$app_root/tmp/pids" socket_path="$app_root/tmp/sockets" web_server_pid_path="$pid_path/unicorn.pid" sidekiq_pid_path="$pid_path/sidekiq.pid" ### Here ends user configuration ### # Switch to the app_user if it is not he/she who is running the script. if [ "$USER" != "$app_user" ]; then sudo -u "$app_user" -H -i $0 "$@"; exit; fi # Switch to the gitlab path, if it fails exit with an error. if ! cd "$app_root" ; then echo "Failed to cd into $app_root, exiting!"; exit 1 fi ### Init Script functions check_pids(){ if ! mkdir -p "$pid_path"; then echo "Could not create the path $pid_path needed to store the pids." exit 1 fi # If there exists a file which should hold the value of the Unicorn pid: read it. if [ -f "$web_server_pid_path" ]; then wpid=$(cat "$web_server_pid_path") else wpid=0 fi if [ -f "$sidekiq_pid_path" ]; then spid=$(cat "$sidekiq_pid_path") else spid=0 fi } # Checks whether the different parts of the service are already running or not. check_status(){ check_pids # If the web server is running kill -0 $wpid returns true, or rather 0. # Checks of *_status should only check for == 0 or != 0, never anything else. if [ $wpid -ne 0 ]; then kill -0 "$wpid" 2>/dev/null web_status="$?" else web_status="-1" fi if [ $spid -ne 0 ]; then kill -0 "$spid" 2>/dev/null sidekiq_status="$?" else sidekiq_status="-1" fi } check_pids check_status if [ "$web_status" != "0" -a "$sidekiq_status" != "0" ]; then echo "GitLab is not running." exit 2 fi if [ "$web_status" != "0" ]; then printf "The GitLab Unicorn webserver is \033[31mnot running\033[0m.\n" exit 1 fi if [ "$sidekiq_status" != "0" ]; then printf "The GitLab Sidekiq job dispatcher is \033[31mnot running\033[0m.\n" exit 1 fi if [ "$web_status" = "0" -a "$sidekiq_status" = "0" ]; then printf "GitLab and all it's components are \033[32mup and running\033[0m.\n" exit 0 fi

  Read the article

• Hot-swap drive got new name, can I change it on-the-fly?

  - by T.J. Crowder

  One of the HDDs in my server's RAID config failed, so I took it out of the array and had the data center hot-swap it. They've done that, but now the new drive is /dev/sdc rather than /dev/sda. I suspect — correct me if I'm wrong — that if I reboot the server, it will be /dev/sda again, so I'm hesitant to add it back to the array as /dev/sdc because I don't want to lay a trap for myself to fall into on the next reboot. I'd just as soon not reboot the server if I don't need to (if I do need to, well, too bad for me). Is there a way I can change the device name from /dev/sdc to /dev/sda without rebooting? This is on Ubuntu 10.04 LTS. It's an md array ("Linux Software RAID"), where currently one of the devices (there are a couple of them) looks like this ("degraded" because I've removed the old /dev/sda from it): # mdadm --detail /dev/md0 /dev/md0: Version : 00.90.03 Creation Time : Sun Oct 11 21:07:54 2009 Raid Level : raid1 Array Size : 97536 (95.27 MiB 99.88 MB) Used Dev Size : 97536 (95.27 MiB 99.88 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Jun 30 09:31:16 2011 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 UUID : 496be7a5:ab9177ed:7792c71e:7dc17aa4 Events : 0.112 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed Thanks, Update: Reading through the kernel md documentation, I suspect that if the name changes on reboot, it won't matter. (Good design, that.) Here's why: Boot time autodetection of RAID arrays When md is compiled into the kernel (not as module), partitions of type 0xfd are scanned and automatically assembled into RAID arrays. This autodetection may be suppressed with the kernel parameter "raid=noautodetect". As of kernel 2.6.9, only drives with a type 0 superblock can be autodetected and run at boot time. The kernel parameter "raid=partitionable" (or "raid=part") means that all auto-detected arrays are assembled as partitionable. I do have md compiled into the kernel, so I'm rebuilding the array now and will do the reboot to see what happens. Even if it works, the above doesn't answer the question I actually asked, so unless someone comes along and answers that question in the meantime (I'd be interested, even if it's not necessary for what I'm doing this very moment), I'll just delete the question to keep noise down.

  Read the article

• HTTPS request to a specific load-balanced virtual host (using Shibboleth for SSO)?

  - by Gary S. Weaver

  In one environment, we have three servers load balanced that have a single Tomcat instance on each, fronted by two different Apache virtual hosts. Each of those two virtual hosts (served by all three servers) has its own different load balancer. Internally, the first host (we'll call it barfoo) is served by port 443 (HTTPS) with its cert and the second host (we'll call it foobar) is served by port 1443 (HTTPS). When you hit foobar, it goes to the load balancer which is using IP affinity for that host, so you can easily test login/HTTPS on one of the servers serving foobar, but not the others (because you keep getting that server for the lifetime of the LB session, iirc). In addition, each of the servers are using Shibboleth v2 for authN/SSO, using mod_shib (iirc). So, a normal request to foobar hits the LB, is directed to the 3rd server (and will do that from then on for as long as the LB session lasts), then Apache, then to the Shibboleth SP which looks at the request, makes you login via negotiation with the Shibboleth IdP, then you hit Apache again which in turn hits Tomcat, renders, and returns the response. (I'm leaving out some steps there.) We'd like to hit one of the individual servers (foobar-03.acme.org which we'll say has IP 1.2.3.4) via HTTPS (skipping the load balancer), so we at first try putting this in /etc/hosts: 1.2.3.4 foobar.acme.org But since foobar.acme.org is a secondary virtual host running on 1443, it attempts to get barfoo.acme.org rather than foobar.acme.org at port 1443 and see that the cert for barfoo.acme.org is invalid for this case since it doesn't match the request's host, foobar.acme.org. I thought an ssh tunnel might be easy enough, so I tried: ssh -L 7777:foobar-03.acme.org:1443 [email protected] I tried just hitting https://localhost:7777/webappname in a browser, but when the Shibboleth login is over, it again tries to redirect to barfoo.acme.org, which is the default host for 443, and we get into an infinite redirect loop. I then tried setting up an SSH tunnel with privileged port 443 locally going to 443 of foobar-03.acme.org as the hostname for that virtual host: sudo ssh -L 443:foobar-03.acme.org:1443 [email protected] I also edited /etc/hosts to add: 127.0.0.1 foobar.acme.org This finally worked and I was able to get the browser to hit the individual HTTPS host at https://foobar.acme.org/webappname, bypassing the load balancer. This was a bit of a pain and wouldn't work for everyone, due to the requirement to use the local 443 port and ssh to the server. Is there an easier way to browse to and log into an individual host in this case?

  Read the article

• logrotate isn't rotating a particular log file (and i think it should be)

  - by Max Williams

  Hi all. For a particular app, i have log files in two places. One of the places has just one log file that i want to use with logrotate, for the other location i want to use logrotate on all log files in that folder. I've set up an entry called millionaire-staging in /etc/logrotate.d and have been testing it by calling logrotate -f millionaire-staging. Here's my entry: #/etc/logrotate.d/millionaire-staging compress rotate 1000 dateext missingok sharedscripts copytruncate /var/www/apps/test.millionaire/log/staging.log { weekly } /var/www/apps/test.millionaire/shared/log/*log { size 40M } So, for the first folder, i want to rotate weekly (this seems to have worked fine). For the other, i want to rotate only when the log files get bigger than 40 meg. When i look in that folder (using the same locator as in the logrotate config), i can see a file in there that's 54M and which hasn't been rotated: $ ls -lh /var/www/apps/test.millionaire/shared/log/*log -rw-r--r-- 1 www-data root 33M 2010-12-29 15:00 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.access-log -rw-r--r-- 1 www-data root 54M 2010-09-10 16:57 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.debug-log -rw-r--r-- 1 www-data root 53K 2010-12-14 15:48 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.error-log -rw-r--r-- 1 www-data root 3.8M 2010-12-29 14:30 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.ssl.access-log -rw-r--r-- 1 www-data root 16K 2010-12-17 15:00 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.ssl.error-log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 /var/www/apps/test.millionaire/shared/log/unicorn.stderr.log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 /var/www/apps/test.millionaire/shared/log/unicorn.stdout.log Some of the other log files in that folder have been rotated though: $ ls -lh /var/www/apps/test.millionaire/shared/log total 91M -rw-r--r-- 1 www-data root 33M 2010-12-29 15:05 test.millionaire.charanga.com.access-log -rw-r--r-- 1 www-data root 54M 2010-09-10 16:57 test.millionaire.charanga.com.debug-log -rw-r--r-- 1 www-data root 53K 2010-12-14 15:48 test.millionaire.charanga.com.error-log -rw-r--r-- 1 www-data root 3.8M 2010-12-29 14:30 test.millionaire.charanga.com.ssl.access-log -rw-r--r-- 1 www-data root 16K 2010-12-17 15:00 test.millionaire.charanga.com.ssl.error-log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 unicorn.stderr.log -rw-r--r-- 1 deploy deploy 41K 2010-12-29 11:03 unicorn.stderr.log-20101229.gz -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 unicorn.stdout.log -rw-r--r-- 1 deploy deploy 1.1K 2010-10-15 11:05 unicorn.stdout.log-20101229.gz I think what might have happened is that i first ran this config with a pattern matching *.log, and that means it only rotated the two files that ended in .log (as opposed to -log). Then, when i changed the config and ran it again, it won't do any more since it think's its already had its weekly run, or something. Can anyone see what i'm doing wrong? Is it to do with those top folders being owned by root rather than deploy do you think? thanks, max

  Read the article

• Mixed sessions with Classic ASP on IIS 7.5 and Windows 2008 R2 64 bit

  - by Marcin

  Recently had an issues with a server upgrade from IIS 6 on Windows 2003 to IIS 7.5 on Windows 2008 R2 64 bit. We have a number of websites running on Classic ASP. All the sites sit under a particular site, e.g. www.example.com/foo and www.example.com/foobar. On IIS 6 each site was set up as a virtual directory and things worked fine. Since moving to the new set up, a lot of websites seem to have mixed Sessions. To be clear, this is not a app pool recycling issue; rather the sessions are populated with information when the user hits the site and while browsing they get sessions from different sites. We've determined this based on - a few customers called up and reported having their shopping cart with items with names of items belonging to a different site - also our own testing showed that some queries being run would try to bring products in from a different site We've tried - disabling dynamic caching - converting each site to be a virtual application (if I understand correctly, the virtual directory/application concepts were changed/refined somewhat in IIS 7 although to be honest, I'm not clear what the difference is) - various application pool changes (using .NET 2 framework), classic and integrated modes, changing the Process model to NetworkIdentity), all to no avail. The only thing we haven't tried is changing it to run as a 32 bit application. We're not using http only cookies, so when I open up a browser and type document.cookie into the dev console in Firefox/Chrome/IE that there will be multiple ASPSESSIONID=... values whereas previously I believe there was only one. Finally, we use server side JScript for the classic ASP pages, not VBScript, so we have code similar to the below. //the user's login account as a jscript object Session("user") = { email : "[email protected]", id : 123 }; and if we execute a line of code like below: Response.Write( typeof(Session("user")) ); When things are running correctly, we get "object" - as expected. When the Session gets trashed, the output is "unknown" and we are also unable to access the fields within the JScript object (e.g. the .email or .id fields). Much appreciated if anyone can provide any pointers about how to resolve this, everything on google seems to point to different issues.

  Read the article

• logrotate isn't rotating a particular log file (and i think it should be)

  - by Max Williams

  Hi all. For a particular app, i have log files in two places. One of the places has just one log file that i want to use with logrotate, for the other location i want to use logrotate on all log files in that folder. I've set up an entry called millionaire-staging in /etc/logrotate.d and have been testing it by calling logrotate -f millionaire-staging. Here's my entry: #/etc/logrotate.d/millionaire-staging compress rotate 1000 dateext missingok sharedscripts copytruncate /var/www/apps/test.millionaire/log/staging.log { weekly } /var/www/apps/test.millionaire/shared/log/*log { size 40M } So, for the first folder, i want to rotate weekly (this seems to have worked fine). For the other, i want to rotate only when the log files get bigger than 40 meg. When i look in that folder (using the same locator as in the logrotate config), i can see a file in there that's 54M and which hasn't been rotated: $ ls -lh /var/www/apps/test.millionaire/shared/log/*log -rw-r--r-- 1 www-data root 33M 2010-12-29 15:00 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.access-log -rw-r--r-- 1 www-data root 54M 2010-09-10 16:57 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.debug-log -rw-r--r-- 1 www-data root 53K 2010-12-14 15:48 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.error-log -rw-r--r-- 1 www-data root 3.8M 2010-12-29 14:30 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.ssl.access-log -rw-r--r-- 1 www-data root 16K 2010-12-17 15:00 /var/www/apps/test.millionaire/shared/log/test.millionaire.charanga.com.ssl.error-log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 /var/www/apps/test.millionaire/shared/log/unicorn.stderr.log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 /var/www/apps/test.millionaire/shared/log/unicorn.stdout.log Some of the other log files in that folder have been rotated though: $ ls -lh /var/www/apps/test.millionaire/shared/log total 91M -rw-r--r-- 1 www-data root 33M 2010-12-29 15:05 test.millionaire.charanga.com.access-log -rw-r--r-- 1 www-data root 54M 2010-09-10 16:57 test.millionaire.charanga.com.debug-log -rw-r--r-- 1 www-data root 53K 2010-12-14 15:48 test.millionaire.charanga.com.error-log -rw-r--r-- 1 www-data root 3.8M 2010-12-29 14:30 test.millionaire.charanga.com.ssl.access-log -rw-r--r-- 1 www-data root 16K 2010-12-17 15:00 test.millionaire.charanga.com.ssl.error-log -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 unicorn.stderr.log -rw-r--r-- 1 deploy deploy 41K 2010-12-29 11:03 unicorn.stderr.log-20101229.gz -rw-r--r-- 1 deploy deploy 0 2010-12-29 14:49 unicorn.stdout.log -rw-r--r-- 1 deploy deploy 1.1K 2010-10-15 11:05 unicorn.stdout.log-20101229.gz I think what might have happened is that i first ran this config with a pattern matching *.log, and that means it only rotated the two files that ended in .log (as opposed to -log). Then, when i changed the config and ran it again, it won't do any more since it think's its already had its weekly run, or something. Can anyone see what i'm doing wrong? Is it to do with those top folders being owned by root rather than deploy do you think? thanks, max

  Read the article

• $PATH is driving me nuts

  - by Chris4d

  OK, apologies if this is something dumb, but I'm running out of ideas. Goal: prepend /usr/local/bin to $PATH Problem: $PATH won't do what I want or expect How I got here: I want to start learning to program, so I'm getting comfortable messing around under the hood, but don't have a lot of experience. I installed the fish shell (because it's friendly!) using homebrew and set it as my default shell (under system prefs>users & groups>advanced). At some point, I ran brew doctor to see if my installs were all kosher, and it suggested I move /usr/local/bin to the front of $PATH so that I could use my installation of git rather than the system copy. Fine - but between path_helper and fish, something was happening to $PATH that was out of my control, and I could never get the paths arranged in the right way. Environment: OSX 10.8.2, upgraded from 10.7ish, with xcode and devtools installed, plus x11, homebrew, and fish More info: I've set my user's default shell back to bash, and tried a variety of shells thru terminal.app - bash, fish, sh. I moved /usr/local/bin to the top of /etc/paths but it didn't change anything. I looked thru the various config.fish files and commented out stuff that might mess with $PATH, didn't help. I have the following files in /etc/paths.d/: ./10-homebrew containing /usr/local/bin ./20-fish containing /usr/local/Cellar/fish/1.23.1/bin ./40-XQuartz containing /opt/X11/bin I added set +x to my profile and when I start terminal.app I get: Last login: Mon Oct 1 13:31:06 on ttys000 + '[' -x /usr/libexec/path_helper ']' + eval '/usr/libexec/path_helper -s' ++ /usr/libexec/path_helper -s PATH="/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/Cellar/fish/1.23.1/bin:/opt/X11/bin"; export PATH; + '[' /bin/bash '!=' no ']' + '[' -r /etc/bashrc ']' + . /etc/bashrc ++ '[' -z '\s-\v\$ ' ']' ++ PS1='\h:\W \u\$ ' ++ shopt -s checkwinsize ++ '[' Apple_Terminal == Apple_Terminal ']' ++ '[' -z '' ']' ++ PROMPT_COMMAND='update_terminal_cwd; ' ++ update_terminal_cwd ++ local 'SEARCH= ' ++ local REPLACE=%20 ++ local PWD_URL=file://Chriss-iMac.local/Users/c4 ++ printf '\e]7;%s\a' file://Chriss-iMac.local/Users/c4 Chriss-iMac:~ c4$ So it looks like path_helper runs, but then running echo $PATH nets me /usr/bin:/bin:/usr/sbin:/sbin. So, it looks like path_helper isn't even doing what it's supposed to anymore? I'm sure there is some well-defined behavior here that I don't understand, or I borked something while trying to fix it. Please help!

  Read the article

• mac + parallels and https site test = router restarts

  - by Erik

  Ok I have an interesting & very frustrating problem happening. I'm going to explain it the best I can. I work as a graphic designer & web designer on a mac and have a Comcast internet connection that comes through a Comcast branded router (SMC8014) which then ties into an Airport Extreme Base Station which runs my office network. I run OS 10.5.7 and also run Parallels 4.0.3 (running Windows XP) for testing websites in Internet Explorer and so on. Ok, so that the basic background. Here's my issue. I've been collaborating an ecommerce website with another designer/developer and when testing the site on the PC side we have started to run into some sort of network problem. The site is https if that matters at all I suspect it may. Basically when I run parallels for testing I am constantly having to restart the router in order to connect to the test site (it's hosted). Funny thing is I can access the rest of the internet fine, just not this site I'm working on until I restart the router (It's sorta like the site is timing out). This never happens when just running the Mac side of things. It only becomes an issue when Parallels is open and I am doing page refreshes while making css or HTML edits via something like Coda or CSS edit (connected to the hosting server via ftp). The real problem is that once the problem starts I only get about 2 or 3 page loads before I have to restart the router again. It's absolutely crippling. I cannot get any work done when I have to restart the router every couple of minutes. So, if you think this problem is isolated to me, the answer is no. The designer/developer I'm collaborating with has an office a couple miles away and experiences very similar problems under slightly different setup. He also has Comcast as his internet provider and connects his router to an Airport and primarily works on a mac. The main difference is that rather than using a visualizer like parallels to test the website on the PC he uses a real live PC that is on his network. Once he fire up the PC to do testing he runs into the same issue described above. After a couple of page refreshes in Internet Explorer or other browser on the PC the site becomes unresponsive and the router has to get restarted. Any thoughts on what is going on here would be greatly appreciated. Thanks in advance.

  Read the article

• Ubuntu hardware wireless switch has no effect after suspend and 13.10 upgrade

  - by blaineh

  I'm posting this on SU after it stalled on askubuntu. I hope someone here can help! If you'd prefer to answer on AU itself, here's the link: http://askubuntu.com/questions/365177/hardware-wireless-switch-has-no-effect-after-suspend-and-13-10-upgrade Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Edit. This morning, I had had the laptop suspended all night, and then when I tried to awake it, it simply wouldn't. It would try, and then it would sleep again (I guess it felt a little bit like me! </badjoke>). Is it possible these problems are related? Edit. I don't have enough reputation on SU proper to post links to pastebins and other questions I've tried, so I'm putting them in comments, and of course they're available in the original question.

  Read the article

• Tool or script to detect moved or renamed files on Linux prior to a backup

  - by Pharaun

  Basically I am searching to see if there exists a tool or script that can detect moved or renamed files so that I can get a list of renamed/moved files and apply the same operation on the other end of the network to conserve on bandwidth. Basically disk storage is cheap but bandwidth isn't, and the problem is that the files often will be reorganized or moved around into a better directory structure thus when you use rsync to do the backup, rsync won't notice that its a renamed or moved file and re-transmission it over the network all over again despite having the same file on the other end. So I am wondering if there exists a script or tool that can record where all the files are and their names, then just prior to a backup, it would rescan and detect moved or renamed files, then I can take that list and re-apply the move/rename operation on the other side. Here's a list of the "general" features of the files: Large unchanging files They can be renamed or moved around [Edit:] These all are good answers, and what I end up doing in the end was looking at all of the answers and will be writing some code to deal with this. Basically what I am thinking/working on now is: Using something like AIDE for the "initial" scan and enable me to keep checksums on the files because they are supposed to never change, so it would aid on detecting corruption. Creating an inotify daemon that would monitor these files/directory and recording any changes relating to renames & moving the files around to a log file. There are some edge cases where inotify might fail to record that something happened to the file system, thus there is a final step of using find to search the file system for files that has a change time latter than the last backup. This has several benefits: Checksums/etc from AIDE to be able to check/make sure that some media did not get corrupt Inotify keeps resource usage low and no need to re-scan the filesystem over and over No need to patch rsync; If I have to patch things I can, but I would prefer to avoid patching things to keep the burden lower, (IE don't need to re-patch everytime there is an update). I've used Unison before and its really nice, however I could've sworn that Unison does keep copies around on the filesystem and that its "archive" files can grow to be rather large?

  Read the article

• Scaling a video processing application on EC2?

  - by Stpn

  I am approaching the need to scale a video-processign application that runs on EC2. So far the setup is one machine: Backbonejs frontend Rails 3.2 Postgresql Resque + S3 for storage The flow of the app is as follows: 1) Request from frontend. Upload a video. 2) Storing video 3) Quering external APIs. 4) Processing / encoding videos. 5) Post to frontend. I can separate the backend and frontend without any problems, but when it comes to distributing the backend between several servers I am a bit puzzled. I can probably come up with a temporary solution (like just duplicating apps making several instances), but since I don't really have expertise in backend system administration, there can be some fundamental mistakes.. Also I would rather have something that is scalable. I wonder if anyone can give some feedback on the following plan: A) Frontend machine. Just frontend, talks to backend via REST Api of sorts. B) Backend server (BS), main database. Gets request from 1), posts to 2) saves uploads to 3) C) S3 storage. D) Server for quering APIs. Basically just a Resque workers, that post info back to 2) E) Server for video encoding. Processes videos uploaded on 3) and uploads them back. So I will have: A)frontend \ \ B)MAIN_APP/DB ----- C)S3 Storage (Files) / \ / / \ / D)ExternalAPI_queries E)Video_Processing (redundant DB) (redundant DB) All this will supposedly talk to each other via HTTP requests. My reason for this is that Video Processing part is really the most resource-intensive and I would just run barebones application that accepts requests and starts processing them. Questions: 1) In this setup I will have the main database at B) and all other servers will communicate with it via HTTP requests (and store duplicates of databases also I guess..for safety reasons). Is it the right approach or should I have 1 database that everyone connects to (how then?) 2) Is it a good idea to separate API queries from Video Processing part? Logically they are very close (processing is determined by the result of API queries), but resource-wise Video Processing is waaay more intensive. 3) what should I use to distribute calls between backend apps based on load?

  Read the article

• How can I create an appointment on a shared Outlook calendar

  - by roryhewitt

  This isn't as basic a question as it may seem. Hence all the descriptive text... I and my team use Outlook 2007. I have my own personal calendar and also I share a calendar with others in my team (which is mainly used to notify everyone of vacations etc.). The others in my team are NOT technical people. I would like to create a shortcut or template that any of us can use to create an appointment in the shared calendar. My initial though was to create a new appointment, but rather than actually put it in the calendar, I would save it as an Outlook Template (.oft) file. Once created, I would send this to my team and tell them to put it in their Templates file and put a shortcut on their desktop. Then, if they want to put a vacation in the shared calendar, they just double-click on the shortcut, change the dates etc. and then save & close it. However, when I do that, it doesn't save the fact that it's an appointment on the shared calendar - it just adds the appointment to the team member's personal calendar. There doesn't seem to be a way to specify a calendar in the template. I've also tried this by saving the template as a .ics or .vcs file, with no better luck. Additionally, if a team member adds an appointment to the shared calendar, other 'sharees' aren't notified, unless the appointment is actually created as a meeting and the other sharees are explicitly invited. I found this online (http://office.microsoft.com/en-us/outlook-help/keep-everyone-informed-about-time-away-from-the-office-HA010209819.aspx) which APPEARS to say that what I want to do isn't built in functionality (since it shows a bunch of steps to go through. I'd PREFER not to have to add this stuff to everyone else's personal calendar directly. So... Is this possible to do, natively (i.e. directly in Outlook)? Would a Sharepoint calendar make more sense and allow this functionality? Is there a way to do what I want which will allow the other team members to be notified? Like I said, I'm looking for as simple an interface as possible - these people aren't going to want to do much more than open something and change dates. Additionally, they're probably not going to have any fancy software on their PC's, although they will be up to date with Java and (maybe) .NET frameworks. Also, before anyone gets funny, yes, this has to work with Outlook 2007, as it's a corporate standard - we're not able to change that, even though e.g. Google Calendar would do this wonderfully. Obviously if this functionality is available in Outlook 2010, then fantastic - we might be able to upgrade. Thanks!

  Read the article

• Lots of dropped packages when tcpdumping on busy interface

  - by Frands Hansen

  My challenge I need to do tcpdumping of a lot of data - actually from 2 interfaces left in promiscuous mode that are able to see a lot of traffic. To sum it up Log all traffic in promiscuous mode from 2 interfaces Those interfaces are not assigned an IP address pcap files must be rotated per ~1G When 10 TB of files are stored, start truncating the oldest What I currently do Right now I use tcpdump like this: tcpdump -n -C 1000 -z /data/compress.sh -i any -w /data/livedump/capture.pcap $FILTER The $FILTER contains src/dst filters so that I can use -i any. The reason for this is, that I have two interfaces and I would like to run the dump in a single thread rather than two. compress.sh takes care of assigning tar to another CPU core, compress the data, give it a reasonable filename and move it to an archive location. I cannot specify two interfaces, thus I have chosen to use filters and dump from any interface. Right now, I do not do any housekeeping, but I plan on monitoring disk and when I have 100G left I will start wiping the oldest files - this should be fine. And now; my problem I see dropped packets. This is from a dump that has been running for a few hours and collected roughly 250 gigs of pcap files: 430083369 packets captured 430115470 packets received by filter 32057 packets dropped by kernel <-- This is my concern How can I avoid so many packets being dropped? These things I did already try or look at Changed the value of /proc/sys/net/core/rmem_max and /proc/sys/net/core/rmem_default which did indeed help - actually it took care of just around half of the dropped packets. I have also looked at gulp - the problem with gulp is, that it does not support multiple interfaces in one process and it gets angry if the interface does not have an IP address. Unfortunately, that is a deal breaker in my case. Next problem is, that when the traffic flows though a pipe, I cannot get the automatic rotation going. Getting one huge 10 TB file is not very efficient and I don't have a machine with 10TB+ RAM that I can run wireshark on, so that's out. Do you have any suggestions? Maybe even a better way of doing my traffic dump altogether.

  Read the article

• Synchronize the same set of files to 2 different locations with 2 different programs for 2 different purposes

  - by Hedgetrimmer

  Because of stupid questionable IT policies at my not-to-be-named place of occupation, I have been (and will be, for the forseeable future) carrying on an external hard drive a unison-synchronized copy of all of my documents and code, including code which resides in some of my "dotfiles" and other code which resides in ~/bin (things I've made are there because ~/bin is in my $PATH) along with some cruft generated (and to be generated) by conscript and its related "giter8" templating system for Scala project boilerplates. Despite this, I do use a symlinking program to store all of my important dotfiles in a subdirectory. Thanks to that somewhat complicated setup, I have resorted to making a directory full of symlinks to every directory (or file, as is the case with stuff under ~/bin) that I want synchronized, and then follow = True is in my unison profile. It happens to be that this collection of odds and ends—plus an automatically-generated text file containing every package installed on my system—is everything under ~ that needs to be backed up to a remote (rsync-over-ssh) host with client-side encryption and signing from GPG. I already believe that duplicity is the most appropriate program to do that. What isn't as clear-cut is how to make duplicity use the exact same set of files when it runs a backup; it would be simple if duplicity would follow symlinks, but it does not and the manpage lists no option for enabling any such behavior. Comparing unison's file selection algorithm to duplicity's, I don't think I can write a program that could compute a ruleset for one program given one for the other. For the record, I would rather not keep the symlinks manually synchronized with duplicity file-selection rules, as they can change thanks to the above-mentioned complications regarding ~/bin. I don't think running duplicity on the external hard disk is such a good idea either; I usually keep that hard disk unmounted and unplugged in case of a power failure or other physical problem with the computer, plus I'm not sure about duplicity's performance given that: the hard disk is NTFS-formatted in order to be useable at my Windows-imprisoned place of occupation. despite being a USB 3.0 disk, my computer has no USB 3.0 ports so it acts as a USB 2.0 disk. How can I have duplicity (or is there a better program that I have overlooked?) back up the exact same set of files that is bidirectionally synchronized with my external hard disk?

  Read the article

• Vista stuck at "Shutting down..." screen. Any way to get verbose logging?

  - by CapBBeard

  Hi all, My home machine has been running fine for about 3 years, no problems at all. Within the last couple of weeks it's had real trouble trying to shut down. It'll get so far and then just sit there at the "Shutting down..." screen for hours. I've left it overnight, I've tried in safe mode, all to no avail. These days, I just wait for the disk activity to finish up and then hold the power button to turn it off. Feels dirty as, especially because there's a RAID involved! The hardware itself is in pretty good shape and of decent spec; Core 2 Quad, 4GB RAM, 1TB RAID 1+0, so it's not quite like a 7 year old PC coming to end of life! In the last month, hardware hasn't changed except for a new monitor. Admittedly I haven't tried unplugging the monitor but I've never heard of that preventing a shutdown. I might give it a whirl later I guess, as a last resort. I've uninstalled old apps, done updates, checked the event log, looked in device manager, uninstalled all non-present devices, disabled various non-critical devices (imaging, audio etc), unplugged peripherals, stopped non-essential services, unplugged the network, disabled the network adapter entirely, ran chkdsk, verified my RAID, the list goes on. But not a single lead. I'm pretty stumped. It could be hardware, but I have no other evidence to suggest so; when the PC is running, it runs fine. Temperatures are good, gaming is smooth as always, disk performance is fine. Event log even makes it look like the shutdown was completed (gets to the point where the event log service stops). In fact, the PC doesn't appear to realise that I cut the power to it. So my question is, does anyone know if there is a way I can get some verbose output (or a log) from shutdown to give me some idea of what is causing the issue? I'm guessing it's stuck unloading some app/driver but it would be good to get some specifics! Unless anyone has any other ideas? I suspect a reinstall would resolve the issue, however I'm looking to get a new PC built in the next month or so, and the reinstall is going to be quite a big job so I'd rather just wait until then if it comes to that. Would still be nice to get this sorted in the mean time though. Cheers!

  Read the article

• When upgrading from Vista to Windows 7 on a DELL laptop, how do I know which drivers to reinstall an

  - by msorens

  According to Dell's upgrade page for Vista to Windows 7, after using the upgrade assistant the final step is to install drivers. They refer to this page for the order of driver installation, listing 9 items. From there I go to the Dell Drivers and Downloads page, enter my system tag, and get a list of the downloads available for my specific box. That page, by the way, has a link to driver install instructions that lists 10 rather than 9 items. Going to Drivers Help in the side panel and clicking on "In what order should drivers be installed?" shows yet a third list, this one containing 13 items. Not surprisingly, the order of these 3 lists of drivers are not quite the same for the common items! Furthermore, of the 26 files Dell's site recommends for my machine, there are several not shown on any of the 3 lists! I can make determinations for some of these: 6 of them are "applications" so I know which of those I want and that they could probably be safely installed after all drivers. BIOS: I would think this should be unaffected by an OS upgrade so could be skipped. Two tools in the diagnostics category: could probably be done after all drivers. That leaves just a CD/DVD driver and a webcam driver unaccounted for. So my two related questions are these: How critical is the driver installation order and which one do I follow? (Keep in mind this is for an upgrade, not a fresh install.) Where in the order do I insert the CD/DVD and the webcam drivers (if needed) ? Dell's driver download page provides (in theory) the list of all downloads relevant to my specific machine, via the service tag. But do I actually need to reinstall all of them? some? none? How does one determine this? They do label each with Recommended or Optional, so do I need to reinstall all the recommended ones? (Part of the reason for my perplexed frown is that I wonder why I would need to reinstall a CD/DVD driver since I would already be using the drive to install the OS!)

  Read the article

• nginx+django serving static files

  - by avalore

  I have followed instruction for setting up django with nginx from the django wiki (https://code.djangoproject.com/wiki/DjangoAndNginx) and have nginx setup as follows (a few name changes to fit my setup). user nginx nginx; worker_processes 2; error_log /var/log/nginx/error_log info; events { worker_connections 1024; use epoll; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] ' '"$request" $status $bytes_sent ' '"$http_referer" "$http_user_agent" ' '"$gzip_ratio"'; client_header_timeout 10m; client_body_timeout 10m; send_timeout 10m; connection_pool_size 256; client_header_buffer_size 1k; large_client_header_buffers 4 2k; request_pool_size 4k; gzip on; gzip_min_length 1100; gzip_buffers 4 8k; gzip_types text/plain; output_buffers 1 32k; postpone_output 1460; sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 75 20; ignore_invalid_headers on; index index.html; server { listen 80; server_name localhost; location /static/ { root /srv/static/; } location ~* ^.+\.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js|mov) { access_log off; expires 30d; } location / { # host and port to fastcgi server fastcgi_pass 127.0.0.1:8080; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param QUERY_STRING $query_string; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_pass_header Authorization; fastcgi_intercept_errors off; fastcgi_param REMOTE_ADDR $remote_addr; } access_log /var/log/nginx/localhost.access_log main; error_log /var/log/nginx/localhost.error_log; } } Static files aren't being served (nginx 404). If I look in the access log it seems nginx is looking in /etc/nginx/html/static... rather than /srv/static/ as specified in the config. I've no clue why it's doing this, any help would be hugely appreciated.

  Read the article

• Local admin password recovery: Windows Vista

  - by Jim Dennis

  I am faced with an unsettling situation. A friend of my father's has rather suddenly become a widower. Naturally they've taken care of the bank accounts and all the normal mundane things that people have been doing for a century or so. However, she was the computer user of the household. He was aware that they had some online banking stuff and bill paying stuff ... and that she spent lots of time on FaceBook and stuff like that. However, he doesn't know what her local passwords were (actually only vaguely aware that her couple of desktop and couple of laptop system even had passwords). He's never heard of "admin" passwords so that's no good either. In the past I've used KNOPPIX and the old LinuxCare "bootable business card" to recover NT passwords. I've never done this with MS Windows Vista. So, I'm looking for the best advice on how to do this. Naturally I do have physical access to the systems (the two laptops are charging across the room from me; and her old desktop systems are, naturally, still back at his place). Getting it right is much more important than fast or easy (I don't want to mess up those filesystems and possibly lose some photos or other stuff that he or his kids or grandkids will want). (BTW: if anyone things this is some social engineering hack to play upon the sympathies of the community to get the information I'm asking for ... think about it for a minute. I know about IRC and the "warez" boards. I know I can find this stuff out there if I dig enough. I'm just asking here because it'll hopefully be faster and, secondarily to raise awareness. As more of us put more of our lives online ... as we get older and as places like FaceBook continue to widen the appeal of computing to a broader segment of older people ... we are, as computer nerds, going to see a lot more of this. Survivors will needs us to be careful, sensitive and ethically responsible as they try to recover those bits of legacy during their bereavement. I can now tell you, first hand, it sucks!)

  Read the article

• Too many Tunnel Adapter Interfaces

  - by Tomas Lycken

  If I open a command prompt on my machine and type ipconfig /all, I see lots of Tunnel adapter Local Area Connection* 9: Media state . . . . . . . . . . . . . : Media disconnected Connection-specific DNS Sufficx . . . : Description . . . . . . . . . . . . . : Microsoft 6to4 Adapter #5 Physical address. . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . . . : No Autoconfiguration Enabled . . . . . . : Yes In fact, they're so many that my "real" adapters are pushed out of the stack, and can't be seen anymore. Is there any flag I can use on ipconfig to hide all virtual interfaces? Or is there some other way around this problem? Since they always say "Media disconnected" I suppose disabling could be an option, but if possible I'd rather not turn any functionality off. I just want to control what output I get from ipconfig. Also, I know these are related to IPv6 stuff. However, most of what I find on google merely states what these are, and that they're harmless - nothing about hiding/removing them.

  Read the article

• Reasons for missing IP info in `last` output on pts logins?

  - by Mike Pennington

  I have five CentOS 6 linux systems at work, and encountered a rather strange issue that only seems to happen with my userid across all the linux systems I have... This is an example of the problem from entries I excepted from the last command... mpenning pts/19 Fri Nov 16 10:32 - 10:35 (00:03) mpenning pts/17 Fri Nov 16 10:21 - 10:42 (00:21) bill pts/15 sol-bill.local Fri Nov 16 10:19 - 10:36 (00:16) mpenning pts/1 192.0.2.91 Fri Nov 16 10:17 - 10:49 (12+00:31) kkim14 pts/14 192.0.2.225 Thu Nov 15 18:02 - 15:17 (4+21:15) gduarte pts/10 192.0.2.135 Thu Nov 15 12:33 - 08:10 (11+19:36) gduarte pts/9 192.0.2.135 Thu Nov 15 12:31 - 08:10 (11+19:38) kkim14 pts/0 :0.0 Thu Nov 15 12:27 - 15:17 (5+02:49) gduarte pts/6 192.0.2.135 Thu Nov 15 11:44 - 08:10 (11+20:25) kkim14 pts/13 192.0.2.225 Thu Nov 15 09:56 - 15:17 (5+05:20) kkim14 pts/12 192.0.2.225 Thu Nov 15 08:28 - 15:17 (5+06:49) kkim14 pts/11 192.0.2.225 Thu Nov 15 08:26 - 15:17 (5+06:50) dspencer pts/8 192.0.2.130 Wed Nov 14 18:24 still logged in mpenning pts/18 alpha-console-1. Mon Nov 12 14:41 - 14:46 (00:04) You can see two of my pts login entries above that do not have a source IP address associated with them. My CentOS machines have as many as six other users that share the systems, but the mpenning userid is the only one that has this issue. Approximately 5% of my logins see this issue, but no other usernames exhibit this behavior. Questions Given the kind of scripts I keep on these systems (which control much of our network infrastructure), I'm a little spooked by this and would like to understand what would cause my logins to occasionally miss source addresses. Is there anything (other than malicious activity) that would reasonably explain the behavior? Other than bash history timestamping, are there other things I can do to track the issue down? Informational Since this started happening, I enabled bash history time-stamping (i.e. HISTTIMEFORMAT="%y-%m-%d %T " in .bash_profile) and also added a few other bash history hacks; however, that does not give clues to what happened during the previous occurrences. All the systems run CentOS 6.3... [mpenning@typo ~]$ uname -a Linux typo.local 2.6.32-279.9.1.el6.x86_64 #1 SMP Tue Sep 25 21:43:11 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux [mpenning@typo ~]$ EDIT If I use last -i mpenning, I see entries like this... mpenning pts/19 0.0.0.0 Fri Nov 16 10:32 - 10:35 (00:03) mpenning pts/17 0.0.0.0 Fri Nov 16 10:21 - 10:42 (00:21)

  Read the article

• All internet requests in Windows time out

  - by Brandon

  So, I've run into a very strange problem with my home wireless network. Previously, at seemingly random times, the router seemed to disconnect all wireless hosts and cause all of the wired hosts to have a "limited connection" according to windows. In order to fix this, I had to unplug all of the wired hosts from the router, unplug the modem from the router, and power cycle the router. This seemed to solve the problem for a while until the exact same thing happened a day later and I had to go through the same process again. That's where I noticed something weird happening. There was one wireless host (a Windows Vista laptop) that seemed to be causing the router to disconnect the other hosts whenever it connected. When this happened, only that laptop was able to use the wireless from the router. When this happened, I disconnected it from the wireless (by disabling the wireless adapter) then reconnected it (by re-enabling it) and now it, like the other hosts, couldn't connect. I've never really seen anything this strange happen on our network before. So, I restored the router to factory settings and the problem seems to have vanished except one crucial problem. There's another host (a Windows 7 laptop) that was perfectly able to connect before all of the router issues and even in between the crashing and power-cycling events but now says its connected and says it's able to reach the Internet, but all requests time out. In any browser I've tried, the tab says connecting to [site]... for a solid minute and then tells me the request timed out. When I try to ping google.com in cmd it also says request timed out. In frustration, I booted into a dual-boot Ubuntu installation on the Windows 7 host and the connection works fine, to my surprise, as ubuntu is where I am now typing this rather long question. I haven't looked through the event log in windows but will post anything I find in an edit I haven't tried connecting (in Windows 7) to any other wireless network, since The fact that it works in Ubuntu suggests its Windows and not the router but I didn't change any wireless settings in windows before it being able to reach the Internet and not. Does anyone have any clue what could have happened. I opened to buying another router as this one is almost a year old :) but I would like to know whats going on here. Thanks in Advance! P.S. Sorry for how long my question is, I'm a little anxious (:

  Read the article

• a couple of questions about proxy server,vpn & how they works

  - by Q8Y

  I have a couple of questions that are related to security. Correct me if i'm wrong :) If I want to request something (ex: visiting www.google.com): my computer will request that then it will to the ISP then to my ISP proxy server that will take the request and act as a middle man in this situation ask for the site (www.google.com) and retrieve it then the proxy will send it back to me. I know that its being done like that. So, my question is that, in this situation my ISP knows everything and what I did request, and the proxy server is set by default (when I ask for an internet subscription). So, if I use here another proxy (lets assume that is a highly anonymous and my ISP can't detect my IP address from it), would I visit my ISP and then from my ISP it will redirect me to the new proxy server that I provide? Will it know that there is someone using another proxy? Or will it go to another network rather than my ISP? Because I didn't get the view clearly. This question is related to the first one. When I use a VPN, I know that VPN provides for me a tunneling, encryption and much more features that a proxy can't. So my data is travelling securely and my ISP can't know what I'm doing. But my questions are: From where is the tunneling started? Does it start after I visit the ISP network (since they are the one that are responsible for forwarding my data and requests)? If so, then not all my connection is tunneled in this way, there is a part that is not being tunneled. Since, every time I need to do anything I have to go to my ISP and ask to do that. Correct me if I misunderstand this. I know that VPN can let my computer be virtually in another place and access its resources (ex: be like in my office while I'm in my home. This is done via VPN). If I use a VPN service provider so that I can access the internet securely and without being monitored by my ISP. In this case, where is my encrypted data saved? Is it saved in my ISP or in the VPN service provider? If I use a VPN, does anyone on the internet know what I'm doing or who I am? Even the VPN service provider? Can they know me? I think they should know the person that is asking for this VPN service, am I right?

  Read the article

• git, egit, submodules, and symlinks -- how should shared sub-projects be handled in eclipse?

  - by Autophil

  Here's the situation. I have a few git projects with a directory structure layed out more or less like this: simpleproj app www admin demo lib model orm view model user blah ... storeproj app www about mobile fbapp lib model orm view model user message cart product merchant Each directory in "lib" contains a separate project, either created in-house or forked, all of which use git for source control. So I figured I should make them submodules of my projects, right? Well, we've been moving toward eclipse + egit, because some of our windows guys not used to a CLI need something they can use without being scared of screwing things up. Anyway, the problem is, egit doesn't support submodules. So, my solution has been a rather crude one involving symlinks... lets say my directory structure on my dev box is generally layed out like this: ~/projects/ bigproj .git app lib model (- ~/lib/model/src/) orm (- ~/lib/orm/src/) neatproj .git app lib view (- ~/lib/view/src/) oldproj .git app lib orm (- ~/lib/orm/src/) ~/lib/ model .git src README.md orm .git src COPYING view .git src ...the symlinks link inside of directory with the git repo, so eclipse doesn't get confused, and everything sort of works. On my machine, I can update the libs from anywhere and all projects will be updated (needing to be committed again of course). Each project stores a separate copy of the contents of the symlinked directories within "lib" -- but only when staged from within eclipse. After committing from eclipse and moving back to the CLI, git sees that a bunch of files have been removed and a few symlinks have been created. Of course this is acceptable also, probably more so than keeping a separate history of the libs for each project... but eclipse and CLI git obviously need to be on the same page so tons of files aren't vanishing and reappearing. So this brings me to my question. I'd like to know how to either: get eclipse+egit to see the symlinks as symlinks if git will somehow handle them properly*, or get the CLI git to treat them as non-symlinks. Or, if there's a better way to do this, I'm all ears. Hope this all made sense! :D Note: tried to tag this as git-submodules, but was not allowed :( * should I make them relative or absolute? Either way it's a mess. Also will symlinks will work on windows? i know there's something similar but you need a 3rd party tool to manage them AFAIK, i doubt these would translate well.

  Read the article

< Previous Page | 418 419 420 421 422 423 424 425 426 427 428 429  | Next Page >