Search Results

Search found 22413 results on 897 pages for 'train main'.

Page 423/897 | < Previous Page | 419 420 421 422 423 424 425 426 427 428 429 430  | Next Page >

• If you have the full spec done, what is left for the developer to do?

  - by Leeho

  I'm working in a small company, started as a developer and coded pieces of a big system being provided with detailed specs. Over five years I moved towards analyst position. I know how existing parts of the system are build, so when we need a new subsystem I know how to connect it to the existing things. So I analyse requirements for a new subsystem to be done, design a new module, then code main parts of it. After that me with my colleagues who are proper analysts write detailed specs for junior developers to finish the module. The problem is that I don't see a new job for myself. I realise that jack-of-all-trades isn't considered to be good, and I don't see getting myself a job exactly like this in a big company. But if I look for a developer job, then I would be somewhat like junior again? Because if I will be provided with detailed description of what software has to do, all that seems to be left for me is merely translating spec to the code, which is plain boring. But developer is considered to solve problems, so which problems are those supposed to be? Only pure technical problems I can imagine is performance optimization. So basically my question is - what problems developers are supposed to face and solve, if all decisions of how application should work to meet customers needs are considered to be an analyst job? What problems do you solve at work?

  Read the article

• Can't play Steel Storm, Burning Retribution

  - by Goytor

  I've bougth Steel Storm, Burning Retribution in the Software Center, and every time I run it shows the following message: You have reached this menu due to missing or unlocable content/data You may consider adding -base dir /path/to/game to your launch commandline I've gone to main menu in the preferences tab and changed the launcher to no avail. I've tried running it from console, with /opt/steelstorm-episode2/steelstorm, I got: Game is Steel-Storm using base gamedir gamedata Steel-Storm Linux 01:07:07 Jun 11 2011 - release Playing shareware version. Skeletal animation uses SSE code path DPSOFTRAST available (SSE2 instructions detected) Failed to init SDL joystick subsystem: couldn't exec quake.rc couldn't exec default.cfg execing config.cfg couldn't exec autoexec.cfg Client using an automatically assigned port Client opened a socket on address 0.0.0.0:0 Client opened a socket on address [0:0:0:0:0:0:0:0]:0 Linked against SDL version 1.2.12 Using SDL library version 1.2.14 GL_VENDOR: NVIDIA Corporation GL_RENDERER: GeForce 6150SE nForce 430/PCI/SSE2/3DNOW! GL_VERSION: 2.1.2 NVIDIA 270.41.06 vid.support.arb_multisample 1 vid.mode.samples 0 vid.support.gl20shaders 1 Video Mode: fullscreen 640x480x32x0.00hz S_Startup: initializing sound output format: 48000Hz, 16 bit, 2 channels... Wanted audio Specification: Channels : 2 Format : 0x8010 Frequency : 48000 Samples : 2048 Obtained audio specification: Channels : 2 Format : 0x8010 Frequency : 48000 Samples : 1024 Sound format: 48000Hz, 2 channels, 16 bits per sample CDAudio_Init: No CD in player. Can't get initial CD volume CD Audio Initialized If I try -base /opt/steelstorm-episode2/steelstorm says "command not found".

  Read the article

• Structure of a .NET Assembly

  - by Om Talsania

  Assembly is the smallest unit of deployment in .NET Framework.When you compile your C# code, it will get converted into a managed module. A managed module is a standard EXE or DLL. This managed module will have the IL (Microsoft Intermediate Language) code and the metadata. Apart from this it will also have header information.The following table describes parts of a managed module.PartDescriptionPE HeaderPE32 Header for 32-bit PE32+ Header for 64-bit This is a standard Windows PE header which indicates the type of the file, i.e. whether it is an EXE or a DLL. It also contains the timestamp of the file creation date and time. It also contains some other fields which might be needed for an unmanaged PE (Portable Executable), but not important for a managed one. For managed PE, the next header i.e. CLR header is more importantCLR HeaderContains the version of the CLR required, some flags, token of the entry point method (Main), size and location of the metadata, resources, strong name, etc.MetadataThere can be many metadata tables. They can be categorized into 2 major categories.1. Tables that describe the types and members defined in your code2. Tables that describe the types and members referenced by your codeIL CodeMSIL representation of the C# code. At runtime, the CLR converts it into native instructions

  Read the article

• Looking for something like Google's Picasa [closed]

  - by Skizz

  I almost like Picasa, but there are two issues that irk me and I wondered if anyone knew of an application that does what Picasa does but without the following problems: Network drives. Picasa is hopeless with network drives. Ideally, I'd like photos to be stored remotely and thumbnail databases to be stored locally with a client-server set-up to update client databases. The main aim is to get updates propagated to clients efficently, reduce network bandwidth and have quick browsing on the client. It needs to be snappy when used over a wireless network. This is just a minor point but the folder view looks awful, especially when it uses those tiny thumbnails. (Also, what is it with folders being drawn vertically. Having spent years looking at folders orientated horizontally, turning them on their side looks so wrong.)

  Read the article

• Companies and Ships

  - by TechnicalWriting

  I have worked for small, medium, large, and extra large companies and they have something in common with ships. These metaphors have been used before, I know, but I will have a go at them.The small company is like a speed boat, exciting and fast, and can turn on a dime, literally. Captain and crew share a lot of the work. A speed boat has a short range and needs to refuel a lot. It has difficulty getting through bad weather. (Small companies often live quarter to quarter. By the way, if a larger company is living quarter to quarter, it is taking on water.)The medium company is is like a battleship. It can maneuver, has a longer range, and the crew is focused on its mission. Its main concern are the other battleships trying to blow it out of the water, but it can respond quickly. Bad weather can jostle it, but it can get through most storms.The large company is like an aircraft carrier; a floating city. It is well-provisioned and can carry a specialized load for a very long range. Because of its size and complexity, it has to be well-organized to be effective and most of its functions are specialized (with little to no functional cross-over). There are many divisions and layers between Captain and crew. It is not very maneuverable; it has to set its course well in advance and have a plan of action.The extra large company is like a cruise liner. It also has to be well-organized and changes in direction are often slow. Some of the people are hard at work behind the scenes to run the ship; others can be along for the ride. They sail the same routes over and over again (often happily) with the occasional cosmetic face-lift to the ship and entertainment. It should stay in warm, friendly waters and avoid risky speed through fields of ice bergs.I have enjoyed my career on the various Ships of Technical Writing, but I get the most of my juice from the battleship where I am closer to the campaign and my contributions have the greater impact on success.Mark Metcalfewww.linkedin.com/in/MarkMetcalfe

  Read the article

• How can I get my monitor's maximum resolution without the proprietary AMD graphic driver installed?

  - by Venki

  I am using Ubuntu 14.04. I have an AMD Radeon 5570 HD graphic card. Actually, the default open source REDWOOD drivers aren't allowing me to choose my monitor's maximum screen resolution(which is 1366 x 768). I just have two resolutions displayed which are 1024x768 and 800x600 . If I give the command : xrandr -s 1366x768 then the output is: Size 1366x768 not found in available modes So just for the sake of getting 1366x768 resolution I am forced to install the proprietary graphic driver that AMD gives me from its site. But if I install it(which itself is quite a problem-prone process), I undergo a lot of 'inconvenience'. Sometimes after an OS update, the driver crashes unity. Then I will have to uninstall that driver from a tty and google around for a solution. Also I encounter screen tearing problems occasionally. In addition I also cant see my login screen(See this question which states this particular problem). The main problem is AMD does not update its driver as quick as Ubuntu updates its OS. This is quite irritating. So, I want the maximum resolution(and performance) that my graphics card and monitor can give me without installing the 'problematic' proprietary graphic card driver that AMD gives. Is this possible? Suggestions please. Thanks in advance. PS :- More system specs details:- Intel i3 2100 processor AMD P8H61-M PLUS2 motherboard AMD Radeon 5570 HD graphic card DELL monitor (BTW, Thank you for reading through my elaborate description!)

  Read the article

• Unity3D : Pause Menu - Android

  - by user3666251

  Im making a 2D game for android.I almost completed the game but now I need a pause game option.I added a pause icon on the top right side of the screen.The icon is a gui texture.Here is what I did so far : I made a script which will bring up some buttons (which is not working) and attached it to the GUITexture.This is the script : #pragma strict function OnMouseDown() { Debug.Log("*Pause Menu Opens*"); Time.timeScale = 0; if (GUI.Button(Rect(10,10,100,50),"Restart")); Application.LoadLevel(Application.loadedLevel); if (GUI.Button(Rect(10,60,100,50),"MainMenu")); Application.LoadLevel("MainMenu"); } Now,the problem stands at the part where the buttons won't show up,the game freezes at the first frame but the buttons won't show up.Please,if you can help I would be realy thankful. Thank you. Edit #1 : I just noticed that when I click "Pause" the game freezes and it takes me to the MainMenu.That's because I added the GUIButton which takes you to the main menu.I think the whole script structure is wrong.I also forgot to mention that Im new in scripting/unity. Thank you.

  Read the article

• How do I backup my customer's data?

  - by marcamillion

  If you run a SaaS app, or work on one, I would love to hear from you. Where the safety and security of your customer's data is paramount, how do you secure it and back it up? I would love to know your main host (e.g. Heroku, Engine Yard, Rackspace, MediaTemple, etc.) and who you use for your backup. Be as detailed as possible - e.g. a quick overview of your service and the data you store (images for instance), what happens with the images when the user uploads them (e.g. they go to your Linode VPS, and posted to the site for them to see - then they are automatically sent to AWS or wherever, then once a week they are backed up to tape by the managed hosting provider, and you also back them up to your house/office). If you could also give some idea as to what the unit cost (per GB/per user/per month) of storage is - on average, I would really appreciate that. Getting ready to launch my app, and I would love to get some more perspective on the nitty gritty details involved. Thanks!

  Read the article

• Identify high CPU consumed thread for Java app

  - by Vincent Ma

  Following java code to emulate busy and Idle thread and start it. import java.util.concurrent.*;import java.lang.*; public class ThreadTest {    public static void main(String[] args) {        new Thread(new Idle(), "Idle").start();        new Thread(new Busy(), "Busy").start();    }}class Idle implements Runnable {    @Override    public void run() {        try {            TimeUnit.HOURS.sleep(1);        } catch (InterruptedException e) {        }    }}class Busy implements Runnable {    @Override    public void run() {        while(true) {            "Test".matches("T.*");        }    }} Using Processor Explorer to get this busy java processor and get Thread id it cost lots of CPU see the following screenshot: Cover to 4044 to Hexadecimal is oxfcc. Using VistulVM to dump thread and get that thread. see the following screenshot In Linux you can use  top -H to get Thread information. That it! Any question let me know. Thanks

  Read the article

• Bound external Cisco CIGESM ports to a specific BladeServer

  - by Vinícius Ferrão

  We have an IBM BladeCenter with 14 blade servers and one external Cisco CIGESM for Ethernet connectivity. Since this hardware is a little old, we will use it for other services, and we want to run a pfSense instance on one of the blades. It's just an Firewall Appliance, but it needs two network interfaces: one for the WAN and the other one for LAN access. Our architecture works on top of static routes, we don't use NAT, so we got the WAN IP in one interface routing to the another one. The main problem is how to plug the WAN cable in one of the four external ports and make it exclusive to the blade server containing the firewall. And we also need an exit port that goes through a 3COM 4200G switch that makes the internal routing and VLAN separation. Thanks in advance

  Read the article

• Best scripting language for project [on hold]

  - by Dave

  This is a subjective question, but I don't know where else to ask it. I'd appreciate it if someone could direct me to an appropriate scripting language for my project. I'm a little new at this so I'd appreciate any help. The project is a website that will display a list of photo subject groups (such as "nature" "people" "sports" etc) on the home page. The photos will all be in subdirectories of the main photo directory (photos) and each subject group will represent a subdirectory in photos. For example in directory photos there might be 3 subdirectories, "nature" "people" "sports" and in each of those subdirectories there will be the actual photos. The idea is that when the website owner wants to update/add/delete a subject group all he has to do is add, delete or update a subdirectory of the photos directory. This means, I think, that I need a scripting language that can read the directories and files in the website and then send a web page with the information in it. What is the simplest and easiest scripting language to do this in? Any ideas? Thanks

  Read the article

• GNOME/KDE Linux entirely in RAM?

  - by František Žiacik

  Hi. I'd like to have very responsive linux but I also like modern, elegant and functional desktops like gnome or kde, not the lightweight ones like xfce or lxde. Once I tried PuppyLinux and was impressed by the responsivity when I clicked an application. In my Ubuntu, it bothers me much when I click chromium and must wait 5 seconds of disk flashing until main window appears. Or evolution or anything else. Is it possible to make GNOME or KDE run entirely in RAM like PuppyLinux (of course, I mean frequently used applications and services, not all) if you have enough of it? I don't care if boot time is longer. I tried using "preload" but it didn't help much.

  Read the article

• apt-get update stuck on "Waiting for Headers"

  - by crasic

  I'm setting up a Maverick server on a spare PC. The install completes fine and the system boots up into the shell. However, when I try to do a apt-get update , apt hangs on almost every entry with the message 99% [Waiting for headers] sometimes a message of 96 b/s appears on the far right. The actual percent that it claims also varies. Searching around online gave a potential solution by using the option Acquire::http::Pipeline-Depth="0" this somewhat alleviates the problem, i.e. it stalls on every other entry with the same message as above. If you wait it out (the whole update took about 4 hours), the update still fails as a good portion of the hits show a "unable to connect" or similar message, despite the fact that I can ping the server from the pc just fine. The problem is also unrelated to the mirror used since I've tried about a dozen mirrors with no success, I've even tried commenting out everything but the main entry in sources.list and it still refuses to update. The network connection is fine since I can ping and wget (apt won't let me install lynx until I run a successful update) just fine. I've also reinstalled the distro with no luck. The only thing weird about the setup is that the PC is connecting to the internet through my windows laptop with ICS configured properly, but as I've said before, the network connection is fine.

  Read the article

• recent unreliable wireless connection with Netgear KWGR614 router

  - by gabkdlly

  Recently, my internet connection over wireless ( via a Netgear KWGR614 router ) has become unreliable, on both a Dell laptop running Ubuntu 10.04 as well as my Desktop running Ubuntu 10.10 . The problem does not seem to occur on a laptop running Windows Vista, nor on a Desktop running Windows 7 ( this machine is connected with an ethernet cable ). The problem does not seem to occur on my Openmoko Freerunner ( running Android 1.5 ), though I hardly ever use this device to connect over WLAN, so the problem may have just slipped by. On my main Ubuntu Desktop, I have tried the following wireless devices: a Longshine PCI card ( an old device with an RTL8180L chip ) a D-Link DWL-510 PCI card ( this device threw warnings in dmesg ) a USB device from MSI ( US54EX ). Usually my wireless network shows up in the network manager with a normal signal strength, even when the connection speed is slow or the connection gets reset ( asking me to click connect to re-authenticate my wireless connection ). I know that this router is susceptible to denial of service attacks, as I have previously been able to disrupt its operation by putting an nmap scan into a while loop. Is it possible that someone is jamming my signal ?

  Read the article

• Simple multi-seat

  - by Oli

  I've asked about multiseat before. The answer (for 10.04) involved doing it the proper way (eg through gdm, multiple server layouts). The problem was that gdm needs to be patched or reverted to 2.20 for multiseat. It's an ugly hack that, worse than anything, will hold up future updates. As a result, I didn't do anything. I still have a spare video card. I still have the monitor, keyboard and mouse all sitting waiting to jump into action. And I still want to be able to turn that into a simple desktop. My needs don't seem complicated. I have a second video card, a USB hub and anything connected to that USB hub that I want to be dedicated to another X server. I don't need a login screen (I'm happy hard-coding in a auto-login and I'd be happy with the user starting the X server if that's possible). This is so simple in my head that I only need two questions: How can I explicitly start an X server from the command line on an unused video adapter (by passing it whatever configuration I need to)? Can I have this new X session load a desktop environment on load? This seems like something you should be able to write in a little upstart script within 10 minutes. That would be perfect for me as then I'd have a nice start/stop control over the secondary desktop from the main desktop (that I want to leave unscathed!) I'm thinking something as simple as this for the payload: su -u other_user -c "startx -- localhost hardware-information" And use .xinitrc to load openbox or something...

  Read the article

• What are the requirements to test a website using jquery.get() ? [migrated]

  - by Frankie

  I am working on a simple website. It has to search quite a few text files in different sub-folders. The rest of the page uses jquery, so I would like to use it for this also. The function I am looking at is .get() for downloading the files. So my main question is, can I test this on my local computer (Ubuntu Linux) or do I have to have it uploaded to a server? Also, if there's a better way to go about this, that would be nice to know. However, I'm more worried about getting it working. Thanks, Frankie PS: Heres the JS/jQuery code for downloading the files to an array. g_lists = new Array(); $(":checkbox").each(function(i){ if ($(this).attr("name") != "0") { var path = "../" + $(this).attr("name") + ".txt"; $("#bot").append("<br />" + path); // debug $.get(path, function(data){ g_lists[i] = data; $("#bot").html(data); }); } else { g_lists[i] = ""; } }); Edit: Just a note about the path variable. I think it's correct, but I'm not 100% sure. I'm new to web development. Here's some examples it produces and the directory tree of the site. Maybe it will help, can't hurt. . +-- include ¦   +-- jquery.js ¦   +-- load.js +-- index.xhtml +-- style.css +-- txt    +-- Scripting_Tools    +-- Editors.txt    +-- Other.txt Examples of path: ../txt/Scripting_Tools/Editors.txt ../txt/Scripting_Tools/Other.txt Well I'm a new user, so I can't "answer" my own question, so I'll just post it here: After asking for help on a IRC chat channel specific to jQuery, I was told I could use this on a local host. To do this I installed Apache web server, and copied my site into it's directory. More information on setting it up can be found here: http://www.howtoforge.com/ubuntu_debian_lamp_server Then to run the site I navigated my browser to "localhost" and everything works.

  Read the article

• Network email alerts

  - by stephenfalken

  I would like to buy or d/l an application that will alert our sysadmin in the event of network failure, like via email and/or phone call. I've looked around the net before posting this question, but I have one main concern: if our network goes down, how can a network monitoring application send email to alert us that it's down? Doesn't this have to be an external application that looks at our network from outside? Well anyway, I want to find something that will handle this for us - freeware if possible, sice we're not looking for heavy analysis - just simple alerts. Advice is appreciated.

  Read the article

• is it possible for a router to provide different gateway?

  - by Hao

  i have tp-link wireless router 192.168.10.188, i was can make it function as DHCP provider(range 192.168.10.100 to 192.168.10.109). the only thing that i cannot make it work as intended, is for it to provide different gateway (192.168.10.1), the computers that obtain IP from that router properly get everything(dynamic IP and dns IP), but there is no function on that router to provide different gateway, the computers always get the router's address(192.168.10.188) as gateway. is there a router that can provide different gateway other than its own address? or the question should be, is the dhcp of a router can provide different gateway other than its own address? note: i cannot make the wireless router address as 192.168.10.1, we have main router(non-wireless, address is 192.168.10.1) that is connected directly to internet

  Read the article

• Set up Windows SBS dns server and vpn clients from brench office

  - by mn

  I have got some clients from bench office which connects vpn to main office. The Router from bench office assigned addresses from DHCP 192.168.1.0/255.255.255.0 and remote gateway assigned vpn ip addresses 10.10.20.0/255.255.255.0. There is a DNS server (Active Directory Win SBS 2000) and vpn client are registered with vpn address (10.10.20.0/255.255.255.0 and domain company.com.pl). I would like to register also primary bench subnet 192.168.1.0/255.255.255.0 with domain for example company.vpn.local I want to access vpn hosts for example: dev3.copmany.pkb.local and dev3.company.com using my Win SBS 2000 DNS server.

  Read the article

• Can Solaris RBAC roles be ported to Linux using SElinux only?

  - by Jimmy

  We are migrating an application from Solaris to Linux and the main user is allowed, through the use of RBAC roles, to run a few system commands like svccfg/svcadm (chkconfig on redhat). Is it possible, using only SElinux (no sudo), to allow a normal user to run chkconfig off/on (basically give it the ability to add remove services) ? My approach was to try to create an SElinux user with a corresponding SElinux role that manages the app's domain/type and is allowed to transition to all other domains required to run chkconfig, tcpdump or any other system utility usually restricted to root access only. All my attempts so far have failed, so my second question would be where could I find good documentation that applies to this specific problem ?

  Read the article

• How can I replicate the look and limitations of the Super NES?

  - by Mikalichov

  I am looking to produce graphics with the same limitations / look that in the Super Nes era. I am specifically looking for graphics similar to Chrono Trigger / FF6. It would be a lot easier to do if I had an idea of the resolution / dpi I am supposed to use. I found that the technical specs for the SNES are: Progressive: 256 × 224, 512 × 224, 256 × 239, 512 × 239 Interlaced: 512 × 448, 512 × 478 But even by using these resolutions, it is pointless if I set it at 72dpi, as I will still have possibly very detailed graphics (that is the main thing, I don't want detailed graphics, I want to go pixelated). I figured it might be related to the sprite size limit, i.e.: Sprites can be 8 × 8, 16 × 16, 32 × 32, or 64 × 64 pixels, each using one of eight 16-color palettes and tiles from one of two blocks of 256 in VRAM. Up to 32 sprites and 34 8 × 8 sprite tiles may appear on any one line. This would work for sprites (characters, objects), but what about maps? Are they built entirely from 8x8 tiles? And then, at what resolution is the end result displayed? It might seem like I am giving the question and answers at the same time, but all of these are suppositions I am making, so could someone confirm or correct them?

  Read the article

• Multilingual sites and Google search results, using sub-folders for language

  - by AWinter

  About three months ago we added an English version of our, previously Japanese only, site under the subfolder /en/ we've tried to follow the sometimes incomplete best practices laid out by Google by adding alternate tags to all pages that are currently translated. The top page for instance has the following meta tags for language. <link rel="canonical" href="/"> <link rel="alternate" hreflang="ja" href="/"> <link rel="alternate" hreflang="en" href="/en/"> While the English main page under /en/ has <link rel="canonical" href="/en/"> <link rel="alternate" hreflang="ja" href="/"> <link rel="alternate" hreflang="en" href="/en/"> Alternate languages are setup in the sitemap. (as per Google's recommendations) It seems however that Google absolutely refuses to show the English top page in results when the user is using English at google.com if you search you'll, as of this post, get the Japanese description and a title that Google has apparently invented instead of the title and description in the meta-tags for the /en/ index page. Does anyone have any experience with subfolders actually working to affect search results? What are the best practices for ensuring that the correct language version of my website is displayed through Google and other search engines? And how long will it take before the new language version becomes prominent in search engine results?

  Read the article

• How to install Tor (Web Browser) in Ubuntu 12.10?

  - by Zignd

  I would like to install the Tor, but I'm having some problems. I know that someone will say "This question is a exactly duplication of How to install tor?", but it's not, because the another question can not be applied to Ubuntu 12.10 as the deb command is not available anymore. I did a research and even at the Tor's Official Website the available resource can not be applied to Ubuntu 12.10. I tried to use the deb command (as the above question says: deb http://deb.torproject.org/torproject.org <DISTRIBUTION> main) and the Terminal says deb: command not found and when I try to install it says E: Unable to locate package deb. I've also tried to use the ppa: ubun-tor, but it's not compatible with Quantal Quetzal, because it's too old. I've also tried to use sudo apt-get install tor, but browser icon don't shows up after installation and if you try to use the command tor in the Terminal I get the following error message: Nov 26 10:59:25.731 [notice] Tor v0.2.3.22-rc (git-4a0c70a817797420) running on Linux. Nov 26 10:59:25.731 [notice] Tor can't help you if you use it wrong! Learn how to be safe at https://www.torproject.org/download/download#warning Nov 26 10:59:25.731 [notice] Read configuration file "/etc/tor/torrc". Nov 26 10:59:25.737 [notice] Initialized libevent version 2.0.19-stable using method epoll (with changelist). Good. Nov 26 10:59:25.737 [notice] Opening Socks listener on 127.0.0.1:9050 Nov 26 10:59:25.737 [warn] Could not bind to 127.0.0.1:9050: Address already in use. Is Tor already running? Nov 26 10:59:25.737 [warn] Failed to parse/validate config: Failed to bind one of the listener ports. Nov 26 10:59:25.737 [err] Reading config failed--see warnings above. Thanks in advance.

  Read the article

• thick client migration to web based application

  - by user1151597

  This query is related to application design the technology that I should consider during migration. The Scenario: I have a C#.net Winform application which communicates with a device. One of the main feature of this application is monitoring cyclic data(rate 200ms) sent from the device to the application. The request to start the cyclic data is sent only once in the beginning and then the application starts receiving data from the device until it sends a stop request. Now this same application needs to be deployed over the web in a intranet. The application is composed of a business logic layer and a communication layer which communicates with the device through UDP ports. I am trying to look at a solution which will allow me to have a single instance of the application on the server so that the device thinks that it is connected as usual and then from the business logic layer I can manage the clients. I want to reuse the code of the business layer and the communication layer as much as possible. Please let me know if webserives/WCF/ etc what i should consider to design the migration. Thanks in advance.

  Read the article

• MongoDB: Replicate data in documents vs. “join”

  - by JavierCane

  Disclaimer: This is a question derived from this one. What do you think about the following example of use case? I have a table containing orders. These orders has a lot of related information needed by my current queries (think about the products; the buyer information; the region, country and state of the sale point; and so on) In order to think with a de-normalized approach, I don't have to put identifiers of these related items in my main orders collection. Instead, I have to repeat all the information for each order (ie: I will repeat the buyer's name, surname, etc. for each of its orders). Assuming the previous premise, I'm committing to maintain all the data related to an order without a lot of updates (because if I modify the buyer's name, I'll have to iterate through all orders updating the ones made by the same buyer, and as MongoDB blocks at a document level on updates, I would be blocking the entire order at the update moment). I'll have to replicate all the products' related data? (ie: category, maker and optional attributes like color, size…) What if a new feature is requested and I've to make a lot of queries with the products "as the entry point of the query"? (ie: reports showing the products' sales performance grouping by region, country, or whatever) Is it fair enough to apply the $unwind operation to my orders original collection? (What about the performance?) I should have to do another collection with these queries in mind and replicate again all the products' information (and their orders)? Wouldn't be better to store a product_id in the original orders collection in order to be more tolerable to requirements change? (What about emulating JOINs?) The optimal approach would be a mixed solution with a RDBMS system like MySQL in order to retrieve the complete data? I mean: store products, users, and location identifiers in the orders collection and have queries in MySQL like getAllUsersDataByIds in which I would perform a SELECT * FROM users WHERE user_id IN ( :identifiers_retrieved_from_the_mongodb_query )

  Read the article

< Previous Page | 419 420 421 422 423 424 425 426 427 428 429 430  | Next Page >