Search Results

Search found 24623 results on 985 pages for 'amanz linux'.

Page 424/985 | < Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >

• Router that allows custom Dynamic DNS server [closed]

  - by Thuy

  I've made my own DDNS service and it works fine using an application running on clients to update the IP. But if for some reason I don't have the choice of using my software and instead I need to use a router to update the IP, it becomes troublesome. For example, I needed to setup IPsec from a customer to me and the customers router/firewall (netgear srx5308) has a dynamic IP which is given from the ISP which can't offer static IPs. So it needs to use dynamic dns for it to work. In this case there really isn't a client to run the software on since it's a router/firewall. Unfortunately it seems that most routers are rather unfriendly towards custom DDNS solutions and most offer only dyndns.com or similar templates. Which was the case with this router too. Leaving me with no way to use my own dynamic dns server IP. I have the option of switching out the customers router and I've been looking around for alternatives and other routers/solutions and I was wondering if anyone on this great site might have been in a similar situation or might just know about some router/firewall that is more friendly towards custom ddns solutions that I might be able to use. Thanks in advance for any help or guidance!

  Read the article

• Rules for setting hostname [duplicate]

  - by Ilia Rostovtsev

  This question already has an answer here: Hostnames - What are they all about? 5 answers Setting the hostname: FQDN or short name? 6 answers It's thought that for the hostname should be used FQDN. I have a doubts about whether using: host.domain.ltd and domain.ltd for the hostname is the same thing and will be equally correct / acceptable? I'm willing to use domain.ltd for the hostname. Is it alright?

  Read the article

• CentOS 6 init script doesn't work properly

  - by user711643

  I'm setting up my ruby production server based on CentOS 6. I need a process called god (which is a process monitoring tool) to start at boot. I'm using an init script that I found here. Just as stated in the guide I ran: chkconfig --add god and then chkconfig --level 345 god on After this if I run "service god start|restart" everything works. It loads the available configurations and brings up the related processes (if they are not running). Problem is it doesn't work at boot. If I reboot the system, then I do "ps -aux | grep god". At this point "god" is running but apparently it didn't load the configuration files. If i run again service god restart, it loads everything without problems. What am I doing wrong?

  Read the article

• Triple-Boot + 4 partition Limit

  - by dsimcha

  I just bought a new hard drive so that I could convert my XP-only machine into an XP-Ubuntu-Windows 7 triple boot machine. Since the drive is absurdly huge (1 TB) I wouldn't mind throwing ReactOS into the mix, too. I just found out that master boot records are limited to 4 entries, meaning 4 primary partitions. I had Windows XP set up on my old drive as a boot partition, a program files partition and a media partition. Since I really didn't want to install XP from scratch, I cloned this setup on my new drive. This leaves me one MBR partition entry for installing Windows 7, Ubuntu and ReactOS. I'd like to avoid having to install XP from scratch like the plague, partly because it's supposed to be a safety net in case things go wrong with my other OS's and because I've invested a lot of time getting it set up exactly the way I like it. Here are the options I've considered and why I don't like them: Install Windows 7 on my media partition. This would work, but I prefer to keep my media partition completely separate from any OS, so that I can reformat an OS partition without affecting my media partition at all. Use wubi or something to install Ubuntu in the same partition as something else. Again, this is brittle. Move all my media to a logical drive on an extended partition. Create another logical drive on this extended partition for Ubuntu. The problem here is that extended partitions are rather brittle--if you nuke one, it renders the rest useless. Just put the old drive back in my computer and run XP off it. Use the new one for the other OS's. The problem here is that the old drive is slower and uses extra power, generates extra heat, etc. Can anyone suggest any other possibilities that I may have overlooked?

  Read the article

• Do you lose everything when you have a hard disk failure in a multi-hard disk LVM that does NOT use RAID?

  - by user72630

  I'm debating about using LVM for a media/file server because I would like to combine multiple physical hard disks into one volume. I do not wish to use any RAID in my LVM so my question is: If one of the multiple hard disks in my volume were to go down would I lose all my data or would I just lose the data that was stored on that individual disk? Also, if I were to just lose the data on the individual disk, would it be as simple as replacing that disk and restoring what was on it from a backup to recover? Thanks everyone.

  Read the article

• How may I start a process without having network access and later allow network access?

  - by Eduardo

  I want to run a process without network access but at a later time give access to the network.

  Read the article

• I wanna save some terminal commands in a file

  - by Jakob Abfalter

  I am using Opensuse 12.3 What I wanna do is, create a link on my desktop for some specific terminal commandos. The backround is, that I do some backup via rsync and don`t wanna type the commandos everytime new. I also dont wanna use a cronjob, since my computer isnt running everytime. Perfect would be some desktop icons, which on clicking execute the command(s). Could somebody tell me how to do this?

  Read the article

• How do I use command line and wmctrl to make a window larger than the screen to get a huge screenshot?

  - by Mnebuerquo

  I use a program which makes a large image which I have to scroll to view. The program has no way to save the image, and I have no access to the source to modify it. The only way I have to get the image from the program is by screenshot. My goal is to save the full size image without having to piece together individual screenshots. I'm using this script to try taking a screenshot: #!/bin/bash window=$(wmctrl -l | grep "Program$" | awk '{print $1}') wmctrl -v -i -r $window -e '0,0,0,6030,5828' wmctrl -i -a $window import -window $window ~/Desktop/screenshot.png This uses wmctrl to get the window id ($window) for a window named "Program". It then tries to resize the window to the desired dimensions. It uses imagemagick (import) to save a screenshot.png on the user's Desktop. All of this works except the resize step. I can resize the window using wmctrl -r -e, but sizes greater than the screen size don't work. I'm using Ubuntu 10.04 and the Gnome Desktop. I run two monitors, but I've tried this with one of them disabled. Is there a way to resize the window larger than my screen to get a huge screenshot?

  Read the article

• Closing idle connections with iptables.

  - by kyku

  Hi, I have a server application that does not remove idle connections (resulting from for example client or communication failures). Is it possible to configure iptables to monitor activity on sockets and close connections haven't had any activity for a specified amount of time?

  Read the article

• SVN - Server sent unexpected return value (500 Internal Server Error)

  - by person

  I'm using RabbitVCS to work with Google Code, and I just recently started having problems with trying to commit. Whenever I try to commit, it says... Commit failed Server sent unexpected return value (500 Internal Server Error) in response to Checkout request for (some file that is involved in the commit. The file it fails on isn't consistent). I have no idea what is wrong, any help is appreciated, thanks.

  Read the article

• Running two Magentos installations, one of which has 3 stores set up as multi-store. Which server?

  - by Pedro Peixoto

  I want to run 4 Magento stores in 2 different installations. 1 is a standalonne installation with 3 languages. The other is a multi-store with 3 different online stores in different domains. At the moment we have a VPS with 1GB memory, would that be enough? I ask because I've finished the standalone store and already put it online, and the server is already running on 62% memory. The ideal would be that this is enough as my company wouldn't like to move to a Dedicated Server (as it involves costs). I'm sure I can try to optimize Magento to run on lower memory (I'm expecting visits averaging 2000/day on all sites), if I could have some tips on the best way to do that Id appreciate it too.

  Read the article

• Understanding ulimit -u

  - by tripleee

  I'd like to understand what's going on here. linvx$ ( ulimit -u 123; /bin/echo nst ) nst linvx$ ( ulimit -u 122; /bin/echo nst ) -bash: fork: Resource temporarily unavailable Terminated linvx$ ( ulimit -u 123; /bin/echo one; /bin/echo two; /bin/echo three ) one two three linvx$ ( ulimit -u 123; /bin/echo one & /bin/echo two & /bin/echo three ) -bash: fork: Resource temporarily unavailable Terminated one I speculate that the first 122 processes are consumed by Bash itself, and that the remaining ulimit governs how many concurrent processes I am allowed to have. The documentation is not very clear on this. Am I missing something? More importantly, for a real-world deployment, how can I know what sort of ulimit is realistic? It's a long-running daemon which spawns worker threads on demand, and reaps them when the load decreases. I've had it spin the server to its death a few times. The most important limit is probably memory, which I have now limited to 200M per process, but I'd like to figure out how I can enforce a limit on the number of children (the program does allow me to configure a maximum, but how do I know there are no bugs in that part of the code?)

  Read the article

• How to configure three IP address into single server

  - by user1363308

  I have Cisco device for call forwarding and three different system,I want to configure 15 and 16 server IP into 192.168.53.197 means eth0 --> 192.168.53.197 eth1 --> 192.168.16.15 eth2 --> 192.168.16.16 which work i have done with 15 and 16 individual , I will do some work on 197 after configuration eth1 and eth2. Means one system have three IP address but base IP address is 192.168.53.197

  Read the article

• How to setup IP alias on bridged interface in Ubuntu

  - by Anonymouslemming

  How do I setup an IP alias on a bridge (br0) device on Ubuntu ? If I wait for br0 to come up and then do /sbin/ifconfig br0:0 192.168.10.1 netmask 255.255.255.0 then it works fine. If however I add the following to my /etc/network/interfaces file, it does not work and the network fails to start: auto br0:0 iface br0:0 inet static address 192.168.10.1 netmask 255.255.255.0 At the moment, I have a script in /etc/network/if-up.d/bridge_alias that does this as follows: #!/bin/bash if [ "${LOGICAL}" == "br0" ] && [ "${PHASE}" = "post-up" ]; then echo -n "Starting br0:0 ... " /sbin/ifconfig br0:0 192.168.10.2 netmask 255.255.255.0 echo "Done!" fi What is the right way of doing this though, just using the OS network config files ?

  Read the article

• How to set ext3 partition hidden flag?

  - by MA1

  I have a created an ext3 partition and when i tried to set is hidden flag, there seems no effect. So, how to set the hidden flag of an ext3 partition?

  Read the article

• Can't ping Ip over bridge

  - by tmn29a

  I'm unable to ping another host over a bridge I created, I can't see the error -.- It's a remote machine running debian stable with some backports for which I want to set up DHCP on the new Subnet 172.30.xxx.xxx to be used for KVM-Guests. ifconfig : bond0 Link encap:Ethernet HWaddr e4:11:5b:d4:94:30 inet addr:10.54.2.84 Bcast:10.54.2.127 Mask:255.255.255.192 inet6 addr: fe80::e611:5bff:fed4:9430/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:34277 errors:0 dropped:0 overruns:0 frame:0 TX packets:18379 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2638709 (2.5 MiB) TX bytes:2887894 (2.7 MiB) br0 Link encap:Ethernet HWaddr f2:fc:4d:7f:15:f0 inet addr:172.30.254.66 Bcast:172.30.254.127 Mask:255.255.255.192 inet6 addr: fe80::f0fc:4dff:fe7f:15f0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:252 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:10800 (10.5 KiB) Pings : ping -I br0 172.30.xxx.65 PING 172.30.xxx.65 (172.30.xxx.65) from 172.30.xxx.66 br0: 56(84) bytes of data. --- 172.30.xxx.65 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2017ms ping -I bond0 172.30.254.65 PING 172.30.xxx.65 (172.30.xxx.65) from 10.54.2.84 bond0: 56(84) bytes of data. 64 bytes from 172.30.x.65: icmp_req=1 ttl=64 time=0.599 ms 64 bytes from 172.30.x.65: icmp_req=2 ttl=64 time=0.575 ms 64 bytes from 172.30.x.65: icmp_req=3 ttl=64 time=0.565 ms --- 172.30.x.65 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.565/0.579/0.599/0.031 ms Route : Destination Gateway Genmask Flags Metric Ref Use Iface 172.30.x.64 * 255.255.255.192 U 0 0 0 br0 10.54.x.64 * 255.255.255.192 U 0 0 0 bond0 default 10.54.x.65 0.0.0.0 UG 0 0 0 bond0 default 172.30.x.65 0.0.0.0 UG 0 0 0 br0 The Interface : cat /etc/network/interfaces auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.54.x.84 netmask 255.255.255.192 network 10.54.x.64 gateway 10.54.x.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports bond0 address 172.30.x.66 broadcast 172.30.x.127 netmask 255.255.x.192 gateway 172.30.x.65 bridge_maxwait 0 If you need more info please ask. Thanks for your help !

  Read the article

• Pass parameters to a script securely

  - by codeholic

  What is the best way to pass parameters to a forked script securely? E. g. passing parameters through command line operands is not secure, since someone who has an account on the host can run ps and see them. Unnamed pipe is quite secure, as far as I understand, isn't it? I mean, passing parameters to STDIN of the forked process. What about passing parameters in environment vars? Is it secure? What about passing parameters by other means I didn't mention?

  Read the article

• How to use grep to search for multiple options

  - by michael

  Hi, How can I use grep to search for line with either 'res' or 'rep'? i try "grep -e res|rep" or gre -e "rep|rep" but that does not work.

  Read the article

• Libvirt/KVM in NAT: can't access from host (and can't forward)

  - by SharkWipf

  I'm trying to set up a port forward to a KVM guest, managed through Libvirt on Debian 6. The VM is running in NAT, through the "default" network. This all runs fine, the VM has full internet connection. However, the host cannot reach the vm internally. Neither ping, nc nor nmap on the NAT network give any signs of the VM. Due to this, the normal iptables forwarding rules don't work either. $ cat /etc/debian_version 6.0.5 $ libvirtd --version libvirtd (libvirt) 0.9.11.3 $ kvm --version QEMU emulator version 1.0 (qemu-kvm-1.0+dfsg-11, Debian), Copyright (c) 2003-2008 Fabrice Bellard ifconfig: eth0 Link encap:Ethernet HWaddr 54:04:a6:f1:6f:10 inet addr:x.x.x.x Bcast:x.x.x.x Mask:255.255.255.x inet6 addr: fe80::5604:a6ff:fef1:6f10/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:118902 errors:0 dropped:0 overruns:0 frame:0 TX packets:142357 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:13247173 (12.6 MiB) TX bytes:95163190 (90.7 MiB) Interrupt:28 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:230646 errors:0 dropped:0 overruns:0 frame:0 TX packets:230646 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:204577107 (195.0 MiB) TX bytes:204577107 (195.0 MiB) virbr0 Link encap:Ethernet HWaddr fe:54:00:e2:d2:60 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5050 errors:0 dropped:0 overruns:0 frame:0 TX packets:961 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:666759 (651.1 KiB) TX bytes:400701 (391.3 KiB) vnet0 Link encap:Ethernet HWaddr fe:54:00:e2:d2:60 inet6 addr: fe80::fc54:ff:fee2:d260/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5050 errors:0 dropped:0 overruns:0 frame:0 TX packets:125687 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:739803 (722.4 KiB) TX bytes:6886609 (6.5 MiB)

  Read the article

• Any good resources on setting up an ubuntu virtual machine for web development?

  - by Relequestual

  I'm currently on my placement year at uni with 4 months left. Before working at my current place, I have not used a nix environment for web development and have used WAMP. Over the past year I have found some very interesting new tech that requires a bit more than my shared hosting even to play with (eg node.js, RoR 3). At work we use a Virtual Machine for development, but that's all been set up and configured to match the live servers, and is managed with a Puppet server. Are there any really good resources for setting up and configuring an Ubuntu VM as a web server? Work currently uses Ubuntu so I would assume this is a good OS to use. I do of course know how to use google, but the noise ratio is just too big, so thought I'd ask here, as I know many of you will have a ton of bookmarks. Cheers.

  Read the article

• "shell not found" on start of backtrack 5

  - by Jor-el

  I am using backtrack5 in VMware on my system. I was trying to change my default shell to ksh. After executing the 'chsh' command. On restarting the OS, it shows "Cannot execute ksh: no such file or directory", which apparently because of giving a bad path while changing shell. Because of this I am not able to start the OS, as I have no terminal to interact with (cannot start the GUI). Now I need to restore the previous shell, but I don't have any access to the terminal. Thanks for the help.

  Read the article

• My server keeps sending emails to [email protected]

  - by xtrimsky

  When I type mailq on my server, I get: BB523653A62 4025 Wed Jun 4 10:40:07 MAILER-DAEMON (delivery temporarily suspended: host p3smtpout.secureserver.net[208.109.80.54] refused to talk to me: 554 p3plsmtpout002.prod.phx3.secureserver.net : DED : AJeb1o0334uf1Y801 : DED : You've reached your daily relay quota - IP.ADDRESS) [email protected] B33AD653A4A 4025 Wed Jun 4 08:20:07 MAILER-DAEMON (delivery temporarily suspended: host p3smtpout.secureserver.net[208.109.80.54] refused to talk to me: 554 p3plsmtpout002.prod.phx3.secureserver.net : DED : AJeb1o0334uf1Y801 : DED : You've reached your daily relay quota - IP.ADDRESS) [email protected] B77DF653A63 4025 Wed Jun 4 10:50:07 MAILER-DAEMON (delivery temporarily suspended: host p3smtpout.secureserver.net[208.109.80.54] refused to talk to me: 554 p3plsmtpout001.prod.phx3.secureserver.net : DED : AJvF1o00L4uf1Y801 : DED : You've reached your daily relay quota - IP.ADDRESS) [email protected] B943C653A3C 4025 Wed Jun 4 06:40:07 MAILER-DAEMON (delivery temporarily suspended: host p3smtpout.secureserver.net[208.109.80.54] refused to talk to me: 554 p3plsmtpout001.prod.phx3.secureserver.net : DED : AKBv1o00P4uf1Y801 : DED : You've reached your daily relay quota - IP.ADDRESS) [email protected] (there is probably about 50 of these, and I've cleared the queue today), do you know where these could be coming from ? is it my server sending some logs to "hostmaster" ? I've replaced my actual domain, with "MYDOMAIN". How can I find what could be sending these emails ? The server has recently been hacked so I'm also a bit worried. Thanks!

  Read the article

• CSF Unresolved issue

  - by josephmarhee

  I began receiving service failures for CSF/LFD once the limit was reached in iptables preventing the service from working properly. I flushed all iptables rules, and redid by rules using CIDR rather than the individual IPs that were listed and the issue persists. Error: The VPS iptables rule limit (numiptent) is too low (1527/1536) - stopping firewall to prevent iptables blocking all connections, at line 1459 This is after restarting CSF, which gave me: You have an unresolved error when starting csf. You need to restart csf successfully to remove this warning CSF still seems to be trying to enforce rules that no longer exists (lists entire chains upon trying to be restarted,only to fail with that error). Any idea of what's going on?

  Read the article

• What does *:* in netstat output stands for?

  - by chello

  While executing the command /usr/sbin/lsof -l -i -P -n under root user, I am getting this output. COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME ... httpd 9164 70 3u IPv4 0x2f70270 0t0 TCP 127.0.0.1:9010 (LISTEN) httpd 9164 70 4u IPv6 0x25af4bc 0t0 TCP *:80 (LISTEN) httpd 9164 70 5u IPv4 0x3149e64 0t0 TCP *:* (CLOSED) httpd 9180 70 3u IPv4 0x2f70270 0t0 TCP 127.0.0.1:9010 (LISTEN) httpd 9180 70 4u IPv6 0x25af4bc 0t0 TCP *:80 (LISTEN) httpd 9180 70 5u IPv4 0x3149e64 0t0 TCP *:* (CLOSED) Please let me know what does *:* stands for? I am interested to know both the ipaddress and port fields. Also what does (CLOSED) mean here?

  Read the article

• Backup all plesk MySQL Databases to individual files

  - by Michael

  Hy, Because I'm new to shell scripting I need a hand. I currently backup all mydatabases to a single file, thing that makes the restore preaty hard. The second problem that my MySQL password dosen't work because of a Plesk bug and i get the password from "/etc/psa/.psa.shadow". Here is the code that I use to backup all my databases to a single file. mysqldump -uadmin -p`cat /etc/psa/.psa.shadow` --all-databases | bzip2 -c > /root/21.10.2013.sql.bz2 I found some scripts on the web that backup each database to individual files but I don't know how to make them work for my situation. Here is a example script: for db in $(mysql -e 'show databases' -s --skip-column-names); do mysqldump $db | gzip > "/backups/mysqldump-$(hostname)-$db-$(date +%Y-%m-%d-%H.%M.%S).gz"; done Can someone help me make the script above work for my situation? Requirements: Backup each database to individual file using plesk password location.

  Read the article

< Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >