Search Results

Search found 36234 results on 1450 pages for 'sender id'.

Page 425/1450 | < Previous Page | 421 422 423 424 425 426 427 428 429 430 431 432  | Next Page >

  • Wireless not working with an Atheros AR9285

    - by Neeraj
    I recently installed Ubuntu 12.04 and found my wireless card is not detected by OS. I tired to detect it by network manager but still it is not get output of the required command: toor@Linux:~$ sudo lshw -class network *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: c0 serial: f0:de:f1:9e:22:4d size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=124.123.227.84 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:44 memory:f2400000-f243ffff ioport:2000(size=128) *-network UNCLAIMED description: Network controller product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f2500000-f250ffff and toor@Linux:~$ rfkill list all 0: ideapad_wlan: Wireless LAN Soft blocked: yes Hard blocked: no 1: ideapad_bluetooth: Bluetooth Soft blocked: yes Hard blocked: no Please let me know what more info is required to resolve it.

    Read the article

  • How can I assign actions to all my mouse buttons?

    - by torbengb
    I have a mouse with lots of buttons, but it's not a mainstream make like Logitech. For Windows, I have a driver that lets me assign actions like close-window (Ctrl+W) or next-tab (Ctrl+Tab), but I don't have a Linux driver. Since Linux is so flexible, I thought perhaps there is a general way to do this, regardless of brand? Update: Based on input from Cyrex, I installed and ran sudo apt-get install btnx which found several but not all mouse buttons. Found: left, right, wheel, wheelclick, thumb fwd, thumb back. Not found: wheel left, wheel right, thumb middle button. Vendor ID is 0x04d9, Model ID is 0xa015.

    Read the article

  • Stumbling Through: Visual Studio 2010 (Part II)

    I would now like to expand a little on what I stumbled through in part I of my Visual Studio 2010 post and touch on a few other features of VS 2010.  Specifically, I want to generate some code based off of an Entity Framework model and tie it up to an actual data source.  Im not going to take the easy way and tie to a SQL Server data source, though, I will tie it to an XML data file instead.  Why?  Well, why not?  This is purely for learning, there are probably much better ways to get strongly-typed classes around XML but it will force us to go down a path less travelled and maybe learn a few things along the way.  Once we get this XML data and the means to interact with it, I will revisit data binding to this data in a WPF form and see if I cant get reading, adding, deleting, and updating working smoothly with minimal code.  To begin, I will use what was learned in the first part of this blog topic and draw out a data model for the MFL (My Football League) - I dont want the NFL to come down and sue me for using their name in this totally football-related article.  The data model looks as follows, with Teams having Players, and Players having a position and statistics for each season they played: Note that when making the associations between these entities, I was given the option to create the foreign key but I only chose to select this option for the association between Player and Position.  The reason for this is that I am picturing the XML that will contain this data to look somewhat like this: <MFL> <Position/> <Position/> <Position/> <Team>     <Player>         <Statistic/>     </Player> </Team> </MFL> Statistic will be under its associated Player node, and Player will be under its associated Team node no need to have an Id to reference it if we know it will always fall under its parent.  Position, however, is more of a lookup value that will not have any hierarchical relationship to the player.  In fact, the Position data itself may be in a completely different xml file (something Id like to play around with), so in any case, a player will need to reference the position by its Id. So now that we have a simple data model laid out, I would like to generate two things based on it:  A class for each entity with properties corresponding to each entity property An IO class with methods to get data for each entity, either all instances, by Id or by parent. Now my experience with code generation in the past has consisted of writing up little apps that use the code dom directly to regenerate code on demand (or using tools like CodeSmith).  Surely, there has got to be a more fun way to do this given that we are using the Entity Framework which already has built-in code generation for SQL Server support.  Lets start with that built-in stuff to give us a base to work off of.  Right click anywhere in the canvas of our model and select Add Code Generation Item: So just adding that code item seemed to do quite a bit towards what I was intending: It apparently generated a class for each entity, but also a whole ton more.  I mean a TON more.  Way too much complicated code was generated now that code is likely to be a black box anyway so it shouldnt matter, but we need to understand how to make this work the way we want it to work, so lets get ready to do some stumbling through that text template (tt) file. When I open the .tt file that was generated, right off the bat I realize there is going to be trouble there is no color coding, no intellisense no nothing!  That is going to make stumbling through more like groping blindly in the dark while handcuffed and hopping on one foot, which was one of the alternate titles I was considering for this blog.  Thankfully, the community comes to my rescue and I wont have to cast my mind back to the glory days of coding in VI (look it up, kids).  Using the Extension Manager (Available under the Tools menu), I did a quick search for tt editor in the Online Gallery and quickly found the Tangible T4 Editor: Downloading and installing this was a breeze, and after doing so I got some color coding and intellisense while editing the tt files.  If you will be doing any customizing of tt files, I highly recommend installing this extension.  Next, well see if that is enough help for us to tweak that tt file to do the kind of code generation that we wantDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Google Analytics Export API - nextPagePath data

    - by Btibert3
    I am probably missing something obvious, but I do not understand when I query: start.date = DATE_START, end.date = DATE_END, dimensions = c("ga:pagePath","ga:previousPagePath"), metrics = c("ga:pageviews"), filters = mypageofinterest, table.id = "ga:mytable", max.results=RESULTS my data return as expected, all of the previous pages including (entrance). However, when I modify the code to be nextPagePath start.date = DATE_START, end.date = DATE_END, dimensions = c("ga:pagePath","ga:nextPagePath"), metrics = c("ga:pageviews"), filters = mypageofinterest, table.id = "ga:mytable", max.results=RESULTS only one line of data are returned; the pagepath and nextpagepath are identical with itself. I replicated this result using the Query Explorer. What am I missing or doing wrong? I was expecting to see a large number of "next" pages, including (exit). Thanks in advance.

    Read the article

  • CodePlex Daily Summary for Saturday, March 24, 2012

    CodePlex Daily Summary for Saturday, March 24, 2012Popular Releasesmenu4web: menu4web 0.0.3: menu4web 0.0.3Craig's Utility Library: Craig's Utility Library 3.1: This update adds about 60 new extension methods, a couple of new classes, and a number of fixes including: Additions Added DateSpan class Added GenericDelimited class Random additions Added static thread friendly version of Random.Next called ThreadSafeNext. AOP Manager additions Added Destroy function to AOPManager (clears out all data so system can be recreated. Really only useful for testing...) ORM additions Added PagedCommand and PageCount functions to ObjectBaseClass (same as M...SQL Monitor - managing sql server performance: SQLMon 4.2 alpha 14: 1. improved accuracy of logic fault checking in analysisMapWindow 6 Desktop GIS: MapWindow 6.1.1: MapWindow 6 Desktop GIS is an open source desktop GIS for Microsoft Windows that is built upon the DotSpatial Library. This release requires .Net 4 (Client Profile). Are you a software developer?Instead of downloading MapWindow for development purposes, get started with with the DotSpatial templateDotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...Indiefreaks Game Framework: 0.9.2.0: Feature: Added SunBurn engine v2.0.18.7 support (doesn't support versions below). Feature: Added GammaCorrection Post processor to allow developers or even players to tweak the Gamma of the game depending on their screen (courtesy of bamyazi) Feature: Added Windows, Xbox 360 & WP7 enabled StorageManager (based on Nick Gravelyn's EasyStorage) to read/write files for player or game data. Feature: Added VirtualGamePad feature for WP7 allowing developers to define Touch areas on screen and mapped...Code for Rapid C# Windows Development eBook + LINQPad and Data Tools: LLBLGen LINQPad Data Context Driver Version 2.1: Sixth release of a LLBLGen Pro Typed Data Context Driver for LINQPad. For LLBLGen Pro versions 3.1 and 3.5(coming). New features:When you switch the query language to SQL, LINQPad updates the Schema Explorer to show SQL column names rather than CLR property names Connection dialog unloads assemblies when it has closed down so they are no longer locked - this allows them to be rebuilt while LINQPad is still open Connection dialog includes a button to quickly add assemblies needed for the...People's Note: People's Note 0.40: Version 0.40 adds an option to compact the database from the profile screen. Compacting a database can make it smaller and faster by removing empty spaces left over by editing, moving, and deleting notes. To install: copy the appropriate CAB file onto your WM device and run it.Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.WebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;Image 3D Viewer: Image 3D Viewer: WPF .Net 3.5 .Net 4 .Net 4.5Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...Nearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01 Visit Roadmap for more details.BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...SCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionSurvey™ - web survey & form engine: Survey™ 2.0: The new stable Survey™ Project 2.0.0.1 version contains many new features like: Technical changes: - Use of Jquery, ASTreeview, Tabs, Tooltips and new menuprovider Features & Bugfixes: Survey list and search function Folder structure for surveys New Menustructure Library list New Library fields User list and search functions Layout options for a survey with CSS, page header and footer New IP filter security feature Enhanced Token Management New Question fields as ID, Alias...Speed up Printer migration using PrintBrm and it's configuration files: BRMC.EXE: Run the tool from the extracted directory of the printbrm backup. You can use the following command to extract a backup file to a directory - PRINTBRM.EXE -R -D C:\TEMP\EXPAND -F C:\TEMP\PRINTERBACKUP.PRINTEREXPORTNew ProjectsAsp.NET Url Router: 1.Url rewritting. 2.Provider regex matcher 3.Support custom url validate handler.BC-Web: ch projectCape: Dynamically generates Capistrano recipes for Rake tasks.cstgamebgs: Project for wp7GCalculator: GCalculator for performing basic arithmetic operations. Windows Sidebar Gadget invacc: Invacc- for inventory and Account Onlineirgsh-node: Worker nodes of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-repo: Repository manager node of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-web: Web interface and task manager of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/Kinect Explorer For SharePoint 2010: Kinect Explorer for SharePoint is a tool which provide Natural User Interface to browse through SharePoint sites. Use body gestures to browse, read, move, copy documents. Use Speech services to read-out the files.MCU: mcu devMVC3ShellCode: MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode NetWatch: NetWatch - network watchdog Small application primary designed for network connectivity monitoring. You can configure set of network tests (ping, http, ...) and time plan for this tests. Application is running in windows notification area and notife you each problem. NMortgage: The goal of this project will be to give a prospective home buyer or an existing home owner the insight they need to explore effects of different repayment strategies or different mortgage structures. Nucleo.NET MVP: The Nucleo MVP framework provides a Model-View-Presenter approach that isn't obtrusive, can be utilized in multiple environments, and is versatile. Providing a lot of features you see in other frameworks, the Nucleo MVP framework provides many extensibility points, pretty much allowing you to rewrite most of the framework. It features dynamic injection support, presenter and view initializers (like what you see in ASP.NET MVC), model property injection, attribute- and convention-based vie...P2PShare: This project is to build a new and moden System for p2p file shearing supporting downloads from HTTP, HTTPS, FTP support for P2Pshare client list servers so files can point to a server or a host only file so no servers are used and only p2p is usedPipeLayer: proyecto de sistemas inteligentespython-irgsh: Python library for BlankOn Package Factory - http://irgsh.blankonlinux.or.id/RamGec XNA Controls - Window Elements Library for XNA Solutions: Lightweight, ultra-high performance and flexible library for displaying and managing Window Controls for XNA system. Features its own Window Designer for creating custom windows and controls.RPG Character Generators and Tools: Various tools for pen and paper style role playing games.Screen scraper: A program that can be used to download public domain MP3 and other media such as pdf documents.SharePoint Bdc request library: The given set of classes simplifies an access to the external data, which can be reached through BDC. The library allows to make simple requests for values from external data source, using a BDC Entity Instance Identifier(s) or a value of a certain BDC Entity field. Developed to interact with Business Data Connectivity of SharePoint 2010.testtom03232012git01: testtom03232012git01testtom03232012git02: testtom03232012git02the north star uc: University projectTyphon: Typhon is a role playing simulation management application, much like Nova, but written in MVC/C#.VRE LabTrove-SharePoint connector: The VRE LabTrove-SharePoint Connector provides a means of integrating the ability to view, post to, and edit posts stored in a LabTrove electronic laboratory notebook from within the familiar environment of Microsoft SharePoint. Once installed and configured, these Web Parts give SharePoint users a straightforward way to interact with any LabTrove installation that they wish to use. They also facilitate users to attach data that is stored in a SharePoint Document Library to the LabTrove posts...

    Read the article

  • High Availability documents for OBIA

    - by Lia Nowodworska - Oracle
    There are 2 white papers that have been created by Product Management and Advanced Resolution team (thanks Rajesh, Archana). These documents describe how to deploy a high-availability environment for the Weblogic components of BI Applications 11.1.1.8.1 and 11.1.1.7.1 including the Oracle Data Integrator. New  Configuring High Availability for Oracle Business Intelligence Applications Version 11.1.1.8.1 (Doc ID 1679319.1)  Updated Configuring High Availability for Oracle Business Intelligence Applications Version 11.1.1.7.1 (Doc ID 1587873.1)  When implementing OBIA please take some time to review one or both of the papers. Do you still have a quick question that you want an expert to have a look at: check in the OBIA Community:

    Read the article

  • Uniquely identify a mobile device

    - by Sahil Malik
    SharePoint, WCF and Azure Trainings: more information Sometimes you need to identify every device your app is installed on uniquely. This is for instance important where you have per-device licensing restrictions. For Win8 store apps, You can use ASHWID (Application Specific Hardware Identifier). ASHWID will be different app to app and device to device. Any hardware changes to the device will cause the unique id to change. You can also detect minor change vs. major change to build custom level of tolerance in what is considered a change. For instance, ejecting a USB stick is a minor change. The below code snippet shows you how to get the unique device id, Read full article ....

    Read the article

  • Why don't I have the option ''Install Ubuntu alongside with them''

    - by almqgh
    Why dont I have this option? here are my disk sudo fdisk -l Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5b53cc54 Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 1153767021 576678711 7 HPFS/NTFS/exFAT /dev/sda3 1216962560 1250050047 16543744 7 HPFS/NTFS/exFAT /dev/sda4 1250050048 1250261679 105816 c W95 FAT32 (LBA) Disk /dev/sdb: 4005 MB, 4005527552 bytes 32 heads, 63 sectors/track, 3880 cylinders, total 7823296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x20d8782d Device Boot Start End Blocks Id System /dev/sdb1 * 63 7822079 3911008+ c W95 FAT32 (LBA)

    Read the article

  • API always returns JSONObject or JSONArray Best practices

    - by Michael Laffargue
    I'm making an API that will return data in JSON. I also wanted on client side to make an utility class to call this API. Something like : JSONObject sendGetRequest(Url url); JSONObject sendPostRequest(Url url, HashMap postData); However sometimes the API send back array of object [{id:1},{id:2}] I now got two choices (): Make the method test for JSONArray or JSONObject and send back an Object that I will have to cast in the caller Make a method that returns JSONObject and one for JSONArray (like sendGetRequestAndReturnAsJSONArray) Make the server always send Arrays even for one element Make the server always send Objects wrapping my Array I going for the two last methods since I think it would be a good thing to force the API to send consistent type of data. But what would be the best practice (if one exist). Always send arrays? or always send objects?

    Read the article

  • An alternative way to request read reciepts

    - by lavanyadeepak
    An alternative way to request read reciepts Sometime or other we use messaging namespaces like System.Net.Mail or System.Web.Mail to send emails from our applications. When we would need to include headers to request delivery or return reciepts (often called as Message Disposition Notifications) we lock ourselves to the limitation that not all email servers/email clients can satisfy this. We can enhance this border a little now, thanks to a new innovation I discovered from Gawab. It embeds a small invisible image of 1x1 dimension and the image source reads as recieptimg.php?id=2323425324. When this image is requested by the web browser or email client, the serverside handler does a smart mapping based on the ID to indicate that the message was read. We call them as 'Web Bugs'. But wait it is not a fool proof solution since spammers misuse this technique to confirm activeness of an email address and most of the email clients suppress inline images for security reasons. I just thought anyway would share this observation for the benefit of others.

    Read the article

  • Join us for 2 JCP sessions today + beer

    - by heathervc
    Remember to join the 2 JCP sessions at JavaOne this afternoon in the Hilton.  First up the JCP.Next panel with JCP EC Members, followed by the 101 Ways to Participate BOF.  Stop in to learn what's new and how you can make the future Java and enjoy a beer or 2.  We will also be in the OTN Java Demogrounds in the Hilton Grand Ballroom from 4:00 - 4:30 PM.  Hope to see you there. JCP.Next: Reinvigorating Java Standards Session ID: BOF6272 Location: Hilton San Francisco - Plaza A/B Date and Time: 10/1/12, 4:30 PM - 5:15 PM 101 Ways to Improve Java: Why Developer Participation Matters Session ID: BOF6283 Location: Hilton San Francisco - Continental Ballroom 4 Date and Time: 10/1/12, 5:30 PM - 6:15 PM

    Read the article

  • Breaking up a large PHP object used to abstract the database. Best practices?

    - by John Kershaw
    Two years ago it was thought a single object with functions such as $database->get_user_from_id($ID) would be a good idea. The functions return objects (not arrays), and the front-end code never worries about the database. This was great, until we started growing the database. There's now 30+ tables, and around 150 functions in the database object. It's getting impractical and unmanageable and I'm going to be breaking it up. What is a good solution to this problem? The project is large, so there's a limit to the extent I can change things. My current plan is to extend the current object for each table, then have the database object contain these. So, the above example would turn into (assume "user" is a table) $database->user->get_user_from_id($ID). Instead of one large file, we would have a file for every table.

    Read the article

  • PeopleSoft Grants & the Federal Agency Letter of Credit Draw Changes

    - by Mark Rosenberg
    For decades, most, if not all, US Federal agencies that sponsor research allowed grant recipients to request and receive payments using pooled accounts, commonly known as pooled letter of credit (LOC) draws. This enabled organizations, such as universities and hospitals, fast and efficient access to reimbursement of the expenditures they incurred conducting research across a portfolio of grants. To support this business practice, the PeopleSoft Grants solution has delivered an LOC Draw report to provide the total request amount along with all of the supporting invoice details for reconciliation and audit purposes. Now, in an attempt to provide greater transparency, eliminate fraud, strengthen accountability for grant-related financial transactions, and simplify grant award closeout, many US Federal sponsors are transitioning from the “pooling” letter of credit draw method to requesting on a “grant-by-grant” basis. The National Science Foundation, the second largest issuer of Federal awards, already transitioned to detailed grant draws in 2013. And, in response to the U.S. Department of Health and Human Services (HHS) directive to HHS-supported Agencies, the largest Federal awards sponsor, the National Institutes of Health (NIH), will fully transition to the new HHS subaccount draw method. This will require NIH award recipients to request payments based on actual expenses incurred on an award-by-award basis. NIH is expected to fully transition to this new draw method by the end of Federal fiscal year 2015.  (The NIH had planned to fully transition to this new method by the end of fiscal 2014; however, the impact to institutions was deemed to be significant enough that a reprieve was recently granted.) In light of these new Federal draw requirements, we have recently released these new features to aid our customers on both PeopleSoft Grants releases 9.1 and 9.2:1. Federal Award Identification Number on the Proposal and Award Profile 2. Letter of credit fields on contract lines to support award basis draws and comply with Federal close out mandates3. Process to produce both pro forma and final LOC Draw Reports in BI Publisher report format4. Subacccount ID field on the LOC Summary and a new BI Publisher version of the LOC Summary report 5. Added Subaccount Field and contract info to be displayed on the LOC summary page6. Ability to generate by a variety of dimensions pro forma and invoiced draw listings 7. Queries for generation and manipulation of data to upload into sponsor payment request systems and perform payment matching8. Contracts LOC Close Out query to quickly review final balances prior to initiating final draws and preparing Federal Financial Reports prior to close The PeopleSoft Development team actively monitors this and other major Federal changes and continues working closely with the Grants Product Advisory Group of the Higher Education User Group to ensure a clear understanding of what our customers need in order to transition to new approaches for doing business with the Federal government. For more information regarding the enhancements to the PeopleSoft Grants solution, existing customers can login to My Oracle Support and review the Enhancements to Letter of Credit Process (Doc ID 1912692.1) associated with resolution ID 904830. This enhanced LOC functionality is available in both PeopleSoft FSCM 9.1 Bundle #31 and PeopleSoft FSCM 9.2 Update Image 8.

    Read the article

  • RemoveHandler Issues with Custom Events

    - by Jeff Certain
    This is a case of things being more complicated that I thought they should be. Since it took a while to figure this one out, I thought it was worth explaining and putting all of the pieces to the answer in one spot. Let me set the stage. Architecturally, I have the notion of generic producers and consumers. These put items onto, and remove items from, a queue. This provides a generic, thread-safe mechanism to load balance the creation and processing of work items in our application. Part of the IProducer(Of T) interface is: 1: Public Interface IProducer(Of T) 2: Event ItemProduced(ByVal sender As IProducer(Of T), ByVal item As T) 3: Event ProductionComplete(ByVal sender As IProducer(Of T)) 4: End Interface Nothing sinister there, is there? In order to simplify our developers’ lives, I wrapped the queue with some functionality to manage the produces and consumers. Since the developer can specify the number of producers and consumers that are spun up, the queue code manages adding event handlers as the producers and consumers are instantiated. Now, we’ve been having some memory leaks and, in order to eliminate the possibility that this was caused by weak references to event handles, I wanted to remove them. This is where it got dicey. My first attempt looked like this: 1: For Each producer As P In Producers 2: RemoveHandler producer.ItemProduced, AddressOf ItemProducedHandler 3: RemoveHandler producer.ProductionComplete, AddressOf ProductionCompleteHandler 4: producer.Dispose() 5: Next What you can’t see in my posted code are the warnings this caused. The 'AddressOf' expression has no effect in this context because the method argument to 'AddressOf' requires a relaxed conversion to the delegate type of the event. Assign the 'AddressOf' expression to a variable, and use the variable to add or remove the method as the handler.  Now, what on earth does that mean? Well, a quick Bing search uncovered a whole bunch of talk about delegates. The first solution I found just changed all parameters in the event handler to Object. Sorry, but no. I used generics precisely because I wanted type safety, not because I wanted to use Object. More searching. Eventually, I found this forum post, where Jeff Shan revealed a missing piece of the puzzle. The other revelation came from Lian_ZA in this post. However, these two only hinted at the solution. Trying some of what they suggested led to finally getting an invalid cast exception that revealed the existence of ItemProducedEventHandler. Hold on a minute! I didn’t create that delegate. There’s nothing even close to that name in my code… except the ItemProduced event in the interface. Could it be? Naaaaah. Hmmm…. Well, as it turns out, there is a delegate created by the compiler for each event. By explicitly creating a delegate that refers to the method in question, implicitly cast to the generated delegate type, I was able to remove the handlers: 1: For Each producer As P In Producers 2: Dim _itemProducedHandler As IProducer(Of T).ItemProducedEventHandler = AddressOf ItemProducedHandler 3: RemoveHandler producer.ItemProduced, _itemProducedHandler 4:  5: Dim _productionCompleteHandler As IProducer(Of T).ProductionCompleteEventHandler = AddressOf ProductionCompleteHandler 6: RemoveHandler producer.ProductionComplete, _productionCompleteHandler 7: producer.Dispose() 8: Next That’s “all” it took to finally be able to remove the event handlers and maintain type-safe code. Hopefully, this will save you the same challenges I had in trying to figure out how to fix this issue!

    Read the article

  • Why my domain redirect on Google Apps is returning 404?

    - by Tom Brito
    I have a configuration in the Google Apps Control Panel (dcc.securepaynet.net) to redirect <tombrito.com to <http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4499244H9. It worked fine until some days ago, but now it's returning 404. If you access tombrito.com you can see the favicon in the title of the browser tab, but the page shows a 404 error. The target page <http://buscatextual.cnpq.br/buscatextual/visualizacv.do?id=K4499244H9 is fine, it's only some problem with my redirect. Any idea what's wrong here?

    Read the article

  • Windows Phone 7 and WS-Trust

    - by Your DisplayName here!
    A question that I often hear these days is: “Can I connect a Windows Phone 7 device to my existing enterprise services?”. Well – since most of my services are typically issued token based, this requires support for WS-Trust and WS-Security on the client. Let’s see what’s necessary to write a WP7 client for this scenario. First I converted the Silverlight library that comes with the Identity Training Kit to WP7. Some things are not supported in WP7 WCF (like message inspectors and some client runtime hooks) – but besides that this was a simple copy+paste job. Very nice! Next I used the WSTrustClient to request tokens from my STS: private WSTrustClient GetWSTrustClient() {     var client = new WSTrustClient(         new WSTrustBindingUsernameMixed(),         new EndpointAddress("https://identity.thinktecture.com/…/issue.svc/mixed/username"),         new UsernameCredentials(_txtUserName.Text, _txtPassword.Password));     return client; } private void _btnLogin_Click(object sender, RoutedEventArgs e) {     _client = GetWSTrustClient();       var rst = new RequestSecurityToken(WSTrust13Constants.KeyTypes.Bearer)     {         AppliesTo = new EndpointAddress("https://identity.thinktecture.com/rp/")     };       _client.IssueCompleted += client_IssueCompleted;     _client.IssueAsync(rst); } I then used the returned RSTR to talk to the WCF service. Due to a bug in the combination of the Silverlight library and the WP7 runtime – symmetric key tokens seem to have issues currently. Bearer tokens work fine. So I created the following binding for the WCF endpoint specifically for WP7. <customBinding>   <binding name="mixedNoSessionBearerBinary">     <security authenticationMode="IssuedTokenOverTransport"               messageSecurityVersion="WSSecurity11 WSTrust13 WSSecureConversation13 WSSecurityPolicy12 BasicSecurityProfile10">       <issuedTokenParameters keyType="BearerKey" />     </security>     <binaryMessageEncoding />     <httpsTransport/>   </binding> </customBinding> The binary encoding is not necessary, but will speed things up a little for mobile devices. I then call the service with the following code: private void _btnCallService_Click(object sender, RoutedEventArgs e) {     var binding = new CustomBinding(         new BinaryMessageEncodingBindingElement(),         new HttpsTransportBindingElement());       _proxy = new StarterServiceContractClient(         binding,         new EndpointAddress("…"));     using (var scope = new OperationContextScope(_proxy.InnerChannel))     {         OperationContext.Current.OutgoingMessageHeaders.Add(new IssuedTokenHeader(Globals.RSTR));         _proxy.GetClaimsAsync();     } } works. download

    Read the article

  • CCSpriteHole in cocos2d 2.0?

    - by rakkarage
    i was using this cocos2d class CCSpriteHole in cocos2d 1.0 fine... http://jpsarda.tumblr.com/post/15779708304/new-cocos2d-iphone-extensions-a-progress-bar-and-a i am trying to convert it to cocos2d 2.0... i got it to compile by changing glVertexPointer to glVertexAttribPointer like in the 2.0 version of CCSpriteScale9 here http://jpsarda.tumblr.com/post/9162433577/scale9grid-for-cocos2d and changing contentSizeInPixels_ to contentSize_... -(id) init { if( (self=[super init]) ) { opacityModifyRGB_ = YES; opacity_ = 255; color_ = colorUnmodified_ = ccWHITE; capSize=capSizeInPixels=CGSizeZero; //Not used blendFunc_.src = CC_BLEND_SRC; blendFunc_.dst = CC_BLEND_DST; // update texture (calls updateBlendFunc) [self setTexture:nil]; // default transform anchor anchorPoint_ = ccp(0.5f, 0.5f); vertexDataCount=24; vertexData = (ccV2F_C4F_T2F*) malloc(vertexDataCount * sizeof(ccV2F_C4F_T2F)); [self setTextureRectInPixels:CGRectZero untrimmedSize:CGSizeZero]; } return self; } -(id) initWithTexture:(CCTexture2D*)texture rect:(CGRect)rect { NSAssert(texture!=nil, @"Invalid texture for sprite"); // IMPORTANT: [self init] and not [super init]; if( (self = [self init]) ) { [self setTexture:texture]; [self setTextureRect:rect]; } return self; } -(id) initWithTexture:(CCTexture2D*)texture { NSAssert(texture!=nil, @"Invalid texture for sprite"); CGRect rect = CGRectZero; rect.size = texture.contentSize; return [self initWithTexture:texture rect:rect]; } -(id) initWithFile:(NSString*)filename { NSAssert(filename!=nil, @"Invalid filename for sprite"); CCTexture2D *texture = [[CCTextureCache sharedTextureCache] addImage: filename]; if( texture ) return [self initWithTexture:texture]; return nil; } +(id)spriteWithFile:(NSString*)f { return [[self alloc] initWithFile:f]; } - (void) dealloc { if (vertexData) free(vertexData); } -(void) updateColor { ccColor4F color4; color4.r=(float)color_.r/255.0f; color4.g=(float)color_.g/255.0f; color4.b=(float)color_.b/255.0f; color4.a=(float)opacity_/255.0f; for (int i=0; i<vertexDataCount; i++) { vertexData[i].colors=color4; } } -(void)updateTextureCoords:(CGRect)rect { CCTexture2D *tex = texture_; if(!tex) return; float atlasWidth = (float)tex.pixelsWide; float atlasHeight = (float)tex.pixelsHigh; float left,right,top,bottom; left = rect.origin.x/atlasWidth; right = left + rect.size.width/atlasWidth; top = rect.origin.y/atlasHeight; bottom = top + rect.size.height/atlasHeight; // // |/|/|/| // CGSize capTexCoordsSize=CGSizeMake(capSizeInPixels.width/atlasWidth, capSizeInPixels.height/atlasHeight); // From left to right //Top band // Left vertexData[0].texCoords=(ccTex2F){left,top}; vertexData[1].texCoords=(ccTex2F){left,top+capTexCoordsSize.height}; vertexData[2].texCoords=(ccTex2F){left+capTexCoordsSize.width,top}; vertexData[3].texCoords=(ccTex2F){left+capTexCoordsSize.width,top+capTexCoordsSize.height}; // Center vertexData[4].texCoords=(ccTex2F){right-capTexCoordsSize.width,top}; vertexData[5].texCoords=(ccTex2F){right-capTexCoordsSize.width,top+capTexCoordsSize.height}; // Right vertexData[6].texCoords=(ccTex2F){right,top}; vertexData[7].texCoords=(ccTex2F){right,top+capTexCoordsSize.height}; //Center band // Left vertexData[8].texCoords=(ccTex2F){left,bottom-capTexCoordsSize.height}; vertexData[9].texCoords=(ccTex2F){left,top+capTexCoordsSize.height}; vertexData[10].texCoords=(ccTex2F){left+capTexCoordsSize.width,bottom-capTexCoordsSize.height}; vertexData[11].texCoords=(ccTex2F){left+capTexCoordsSize.width,top+capTexCoordsSize.height}; // Center vertexData[12].texCoords=(ccTex2F){right-capTexCoordsSize.width,bottom-capTexCoordsSize.height}; vertexData[13].texCoords=(ccTex2F){right-capTexCoordsSize.width,top+capTexCoordsSize.height}; // Right vertexData[14].texCoords=(ccTex2F){right,bottom-capTexCoordsSize.height}; vertexData[15].texCoords=(ccTex2F){right,top+capTexCoordsSize.height}; //Bottom band //Left vertexData[16].texCoords=(ccTex2F){left,bottom}; vertexData[17].texCoords=(ccTex2F){left,bottom-capTexCoordsSize.height}; vertexData[18].texCoords=(ccTex2F){left+capTexCoordsSize.width,bottom}; vertexData[19].texCoords=(ccTex2F){left+capTexCoordsSize.width,bottom-capTexCoordsSize.height}; // Center vertexData[20].texCoords=(ccTex2F){right-capTexCoordsSize.width,bottom}; vertexData[21].texCoords=(ccTex2F){right-capTexCoordsSize.width,bottom-capTexCoordsSize.height}; // Right vertexData[22].texCoords=(ccTex2F){right,bottom}; vertexData[23].texCoords=(ccTex2F){right,bottom-capTexCoordsSize.height}; } -(void) updateVertices { float left=0; //-spriteSizeInPixels.width*0.5f; float right=left+contentSize_.width; float bottom=0; //-spriteSizeInPixels.height*0.5f; float top=bottom+contentSize_.height; float holeLeft=holeRect.origin.x*CC_CONTENT_SCALE_FACTOR(); float holeRight=holeLeft+holeRect.size.width*CC_CONTENT_SCALE_FACTOR(); float holeBottom=holeRect.origin.y*CC_CONTENT_SCALE_FACTOR(); float holeTop=holeBottom+holeRect.size.height*CC_CONTENT_SCALE_FACTOR(); // // |/|/|/| // // From left to right //Top band // Left vertexData[0].vertices=(ccVertex2F){left,top}; vertexData[1].vertices=(ccVertex2F){left,holeTop}; vertexData[2].vertices=(ccVertex2F){holeLeft,top}; vertexData[3].vertices=(ccVertex2F){holeLeft,holeTop}; // Center vertexData[4].vertices=(ccVertex2F){holeRight,top}; vertexData[5].vertices=(ccVertex2F){holeRight,holeTop}; // Right vertexData[6].vertices=(ccVertex2F){right,top}; vertexData[7].vertices=(ccVertex2F){right,holeTop}; //Center band // Left vertexData[8].vertices=(ccVertex2F){left,holeBottom}; vertexData[9].vertices=(ccVertex2F){left,holeTop}; vertexData[10].vertices=(ccVertex2F){holeLeft,holeBottom}; vertexData[11].vertices=(ccVertex2F){holeLeft,holeTop}; // Center vertexData[12].vertices=(ccVertex2F){holeRight,holeBottom}; vertexData[13].vertices=(ccVertex2F){holeRight,holeTop}; // Right vertexData[14].vertices=(ccVertex2F){right,holeBottom}; vertexData[15].vertices=(ccVertex2F){right,holeTop}; //Bottom band //Left vertexData[16].vertices=(ccVertex2F){left,bottom}; vertexData[17].vertices=(ccVertex2F){left,holeBottom}; vertexData[18].vertices=(ccVertex2F){holeLeft,bottom}; vertexData[19].vertices=(ccVertex2F){holeLeft,holeBottom}; // Center vertexData[20].vertices=(ccVertex2F){holeRight,bottom}; vertexData[21].vertices=(ccVertex2F){holeRight,holeBottom}; // Right vertexData[22].vertices=(ccVertex2F){right,bottom}; vertexData[23].vertices=(ccVertex2F){right,holeBottom}; } -(void) setHole:(CGRect)r inRect:(CGRect)totalSurface { holeRect=r; self.contentSize=totalSurface.size; holeRect.origin=ccpSub(holeRect.origin,totalSurface.origin); CGPoint holeCenter=ccp(holeRect.origin.x+holeRect.size.width*0.5f,holeRect.origin.y+holeRect.size.height*0.5f); self.anchorPoint=ccp(holeCenter.x/contentSize_.width,holeCenter.y/contentSize_.height); //[self updateTextureCoords:rectInPixels_]; [self updateVertices]; [self updateColor]; } -(void) draw { BOOL newBlend = NO; if( blendFunc_.src != CC_BLEND_SRC || blendFunc_.dst != CC_BLEND_DST ) { newBlend = YES; glBlendFunc( blendFunc_.src, blendFunc_.dst ); } glBindTexture(GL_TEXTURE_2D, [texture_ name]); glVertexAttribPointer(kCCVertexAttrib_Position, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[0].vertices); glVertexAttribPointer(kCCVertexAttrib_TexCoords, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[0].texCoords); glVertexAttribPointer(kCCVertexAttrib_Color, 4, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[0].colors); glDrawArrays(GL_TRIANGLE_STRIP, 0, 8); glVertexAttribPointer(kCCVertexAttrib_Position, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[8].vertices); glVertexAttribPointer(kCCVertexAttrib_TexCoords, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[8].texCoords); glVertexAttribPointer(kCCVertexAttrib_Color, 4, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[8].colors); glDrawArrays(GL_TRIANGLE_STRIP, 0, 8); glVertexAttribPointer(kCCVertexAttrib_Position, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[16].vertices); glVertexAttribPointer(kCCVertexAttrib_TexCoords, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[16].texCoords); glVertexAttribPointer(kCCVertexAttrib_Color, 4, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[16].colors); glDrawArrays(GL_TRIANGLE_STRIP, 0, 8); if( newBlend ) glBlendFunc(CC_BLEND_SRC, CC_BLEND_DST); } -(void)setTextureRectInPixels:(CGRect)rect untrimmedSize:(CGSize)untrimmedSize { rectInPixels_ = rect; rect_ = CC_RECT_PIXELS_TO_POINTS( rect ); //[self setContentSizeInPixels:untrimmedSize]; [self updateTextureCoords:rectInPixels_]; } -(void)setTextureRect:(CGRect)rect { CGRect rectInPixels = CC_RECT_POINTS_TO_PIXELS( rect ); [self setTextureRectInPixels:rectInPixels untrimmedSize:rectInPixels.size]; } // // RGBA protocol // #pragma mark CCSpriteHole - RGBA protocol -(GLubyte) opacity { return opacity_; } -(void) setOpacity:(GLubyte) anOpacity { opacity_ = anOpacity; // special opacity for premultiplied textures if( opacityModifyRGB_ ) [self setColor: (opacityModifyRGB_ ? colorUnmodified_ : color_ )]; [self updateColor]; } - (ccColor3B) color { if(opacityModifyRGB_){ return colorUnmodified_; } return color_; } -(void) setColor:(ccColor3B)color3 { color_ = colorUnmodified_ = color3; if( opacityModifyRGB_ ){ color_.r = color3.r * opacity_/255; color_.g = color3.g * opacity_/255; color_.b = color3.b * opacity_/255; } [self updateColor]; } -(void) setOpacityModifyRGB:(BOOL)modify { ccColor3B oldColor = self.color; opacityModifyRGB_ = modify; self.color = oldColor; } -(BOOL) doesOpacityModifyRGB { return opacityModifyRGB_; } #pragma mark CCSpriteHole - CocosNodeTexture protocol -(void) updateBlendFunc { if( !texture_ || ! [texture_ hasPremultipliedAlpha] ) { blendFunc_.src = GL_SRC_ALPHA; blendFunc_.dst = GL_ONE_MINUS_SRC_ALPHA; [self setOpacityModifyRGB:NO]; } else { blendFunc_.src = CC_BLEND_SRC; blendFunc_.dst = CC_BLEND_DST; [self setOpacityModifyRGB:YES]; } } -(void) setTexture:(CCTexture2D*)texture { // accept texture==nil as argument NSAssert( !texture || [texture isKindOfClass:[CCTexture2D class]], @"setTexture expects a CCTexture2D. Invalid argument"); texture_ = texture; [self updateBlendFunc]; } -(CCTexture2D*) texture { return texture_; } @end but now positioning and scaling seem to not work? and it starts in the wrong position... but changing the opacity still works. so i was wondering if anyone can see why my 2.0 version is not working? or if maybe there is a better way to do a sprite hole with cocos2d/opengl 2.0? shaders? thanks

    Read the article

  • Ubuntu doesn't "see" external USB Hard Disk

    - by Mina Michael
    It's NTFS. It's USB2. I'm using Ubuntu 13.04. It works perfectly fine on Windows (which excludes cable and hardware problems). I have two Ubuntu computers and it's not detected on either. It's about 500 GB. Edits: Following the first link, I input sudo lsusb in a terminal; before and after connecting the HDD. The difference was Bus 001 Device 012: ID 14cd:6116 Super Top M6116 SATA Bridge. There it is! ("sata bridge" used to appear in a windows notification when I plugged in the HDD in!). ...This means that Ubuntu detects it but is it not mounting it? I tried this: sudo mount /dev/sdb1 /mnt But gives this: mount: special device /dev/sdb1 does not exist I also tried: sudo mount /dev/sdc1 /mnt but it stays with no output forever. I left it in background for about 30 min.s. sudo fdisk -l gives out this: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa42d04a3 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility /dev/sda2 * 80325 102481919 51200797+ 7 HPFS/NTFS/exFAT /dev/sda3 263874558 312580095 24352769 5 Extended /dev/sda4 102481920 263872511 80695296 7 HPFS/NTFS/exFAT /dev/sda5 263874560 310505471 23315456 83 Linux /dev/sda6 310507520 312580095 1036288 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5822aaea Device Boot Start End Blocks Id System /dev/sdc1 2048 976769023 488383488 7 HPFS/NTFS/exFAT The part below "Partition table entries are not in disk order" takes about 5 minutes to appear. The outputs of ls /dev/ | grep sd before and after connecting the HDD: before: sda sda1 sda2 sda3 sda4 sda5 sda6 ,after: sda sda1 sda2 sda3 sda4 sda5 sda6 sdd sdd1 The second output has the lines sdd and sdd1 different from the first one. IT SHOWED THE FILES!! The command sudo mount /dev/sdd1 /mnt worked after I typed in sudo fdisk -l!!! Thanks a million!! :) :)

    Read the article

  • SQL Server 2012 RTM Available!

    - by Davide Mauri
    SQL Server 2012 is available for download! http://www.microsoft.com/sqlserver/en/us/default.aspx The Evaluation version is available here: http://www.microsoft.com/download/en/details.aspx?id=29066 and along with the SQL Server 2012 RTM there’s also the Feature Pack available: http://www.microsoft.com/download/en/details.aspx?id=29065 The Feature Pack is rich of useful and interesting stuff, something needed by some feature, like the Semantic Language Statistics Database some other a very good (I would say needed) download if you use certain technologies, like MDS or Data Mining. Btw, for Data Mining also the updated Excel Addin has been released and it’s available in the Feature Pack. As if this would not be enough, also the SQL Server Data Tools IDE has been released in RTM: http://msdn.microsoft.com/en-us/data/hh297027 Remember that SQL Server Data Tool is completely free and can be used with SQL Server 2005 and after. Happy downloading!

    Read the article

  • Identity in .NET 4.5&ndash;Part 2: Claims Transformation in ASP.NET (Beta 1)

    - by Your DisplayName here!
    In my last post I described how every identity in .NET 4.5 is now claims-based. If you are coming from WIF you might think, great – how do I transform those claims? Sidebar: What is claims transformation? One of the most essential features of WIF (and .NET 4.5) is the ability to transform credentials (or tokens) to claims. During that process the “low level” token details are turned into claims. An example would be a Windows token – it contains things like the name of the user and to which groups he belongs to. That information will be surfaced as claims of type Name and GroupSid. Forms users will be represented as a Name claim (all the other claims that WIF provided for FormsIdentity are gone in 4.5). The issue here is, that your applications typically don’t care about those low level details, but rather about “what’s the purchase limit of alice”. The process of turning the low level claims into application specific ones is called claims transformation. In pre-claims times this would have been done by a combination of Forms Authentication extensibility, role manager and maybe ASP.NET profile. With claims transformation all your identity gathering code is in one place (and the outcome can be cached in a single place as opposed to multiple ones). The structural class to do claims transformation is called ClaimsAuthenticationManager. This class has two purposes – first looking at the incoming (low level) principal and making sure all required information about the user is present. This is your first chance to reject a request. And second – modeling identity information in a way it is relevant for the application (see also here). This class gets called (when present) during the pipeline when using WS-Federation. But not when using the standard .NET principals. I am not sure why – maybe because it is beta 1. Anyhow, a number of people asked me about it, and the following is a little HTTP module that brings that feature back in 4.5. public class ClaimsTransformationHttpModule : IHttpModule {     public void Dispose()     { }     public void Init(HttpApplication context)     {         context.PostAuthenticateRequest += Context_PostAuthenticateRequest;     }     void Context_PostAuthenticateRequest(object sender, EventArgs e)     {         var context = ((HttpApplication)sender).Context;         // no need to call transformation if session already exists         if (FederatedAuthentication.SessionAuthenticationModule != null &&             FederatedAuthentication.SessionAuthenticationModule.ContainsSessionTokenCookie(context.Request.Cookies))         {             return;         }         var transformer = FederatedAuthentication.FederationConfiguration.IdentityConfiguration.ClaimsAuthenticationManager;         if (transformer != null)         {             var transformedPrincipal = transformer.Authenticate(context.Request.RawUrl, context.User as ClaimsPrincipal);             context.User = transformedPrincipal;             Thread.CurrentPrincipal = transformedPrincipal;         }     } } HTH

    Read the article

  • After low level formatting can microsoft track previously pirated windows installed on pc

    - by Neelabh
    am getting call from Microsoft and they are forcing me to purchase so many licensed software but my budget is not that much.. So they are asking for On-Site Audit (SAM Review)... So I did low level formatting of my All PC's and Installed Ubuntu. So can they track I installed pirated windows xp earlier on these system or I need to change hardware.. After formatting on what parameter Microsoft Track earlier piracy: 1) By any Harddisk ID 2) By any Motherboard ID 3) By any IP Address Please help me otherwise I have to borrow so much money for licensing fee. Thanks in Advance..

    Read the article

  • Orchard shapeshifting

    - by Bertrand Le Roy
    I've shown in a previous post how to make it easier to change the layout template for specific contents or areas. But what if you want to change another shape template for specific pages, for example the main Content shape on the home page? Here's how. When we changed the layout, we had the problem that layout is created very early, so early that in fact it can't know what content is going to be rendered. For that reason, we had to rely on a filter and on the routing information to determine what layout template alternates to add. This time around, we are dealing with a content shape, a shape that is directly related to a content item. That makes things a little easier as we have access to a lot more information. What I'm going to do here is handle an event that is triggered every time a shape named "Content" is about to be displayed: public class ContentShapeProvider : IShapeTableProvider { public void Discover(ShapeTableBuilder builder) { builder.Describe("Content") .OnDisplaying(displaying => { // do stuff to the shape }); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This handler is implemented in a shape table provider which is where you do all shape related site-wide operations. The first thing we want to do in this event handler is check that we are on the front-end, displaying the "Detail" version, and not the "Summary" or the admin editor: if (displaying.ShapeMetadata.DisplayType == "Detail") { Now I want to provide the ability for the theme developer to provide an alternative template named "Content-HomePage.cshtml" for the home page. In order to determine if we are indeed on the home page I can look at the current site's home page property, which for the default home page provider contains the home page item's id at the end after a semicolon. Compare that with the content item id for the shape we are looking at and you can know if that's the homepage content item. Please note that if that content is also displayed on another page than the home page it will also get the alternate: we are altering at the shape level and not at the URL/routing level like we did with the layout. ContentItem contentItem = displaying.Shape.ContentItem; if (_workContextAccessor.GetContext().CurrentSite .HomePage.EndsWith(';' + contentItem.Id.ToString())) { _workContextAccessor is an injected instance of IWorkContextAccessor from which we can get the current site and its home page. Finally, once we've determined that we are in the specific conditions that we want to alter, we can add the alternate: displaying.ShapeMetadata.Alternates.Add("Content__HomePage"); And that's it really. Here's the full code for the shape provider that I added to a custom theme (but it could really live in any module or theme): using Orchard; using Orchard.ContentManagement; using Orchard.DisplayManagement.Descriptors; namespace CustomLayoutMachine.ShapeProviders { public class ContentShapeProvider : IShapeTableProvider { private readonly IWorkContextAccessor _workContextAccessor; public ContentShapeProvider( IWorkContextAccessor workContextAccessor) { _workContextAccessor = workContextAccessor; } public void Discover(ShapeTableBuilder builder) { builder.Describe("Content") .OnDisplaying(displaying => { if (displaying.ShapeMetadata.DisplayType == "Detail") { ContentItem contentItem = displaying.Shape.ContentItem; if (_workContextAccessor.GetContext() .CurrentSite.HomePage.EndsWith( ';' + contentItem.Id.ToString())) { displaying.ShapeMetadata.Alternates.Add( "Content__HomePage"); } } }); } } } The code for the custom theme, with layout and content alternates, can be downloaded from the following link: Orchard.Themes.CustomLayoutMachine.1.0.nupkg Note: this code is going to be used in the Contoso theme that should be available soon from the theme gallery.

    Read the article

  • New MOS note regarding Oracle Fusion Middleware certifications

    - by Sadia2
    To get started with the My Oracle Support Certification Tool for newer Oracle Fusion Middleware releases, see Doc ID 1368736.1 . This includes Oracle WebLogic Server 10.3.4+, and many popular certifications for Oracle Fusion Middleware 11.1.1.4 and 11.1.1.5. Beginning with FMW 11.1.1.6 and other FMW 11g R2 (11.1.2) releases (e.g., Forms & Reports, Identity Access Management) there is a concerted effort to load all FMW certifications into the MOS Certification tool.To help you find certification information for older Oracle Fusion Middleware releases, see Doc ID 431578.1 .    

    Read the article

  • Sql Table Refactoring Challenge

    Ive been working a bit on cleaning up a large table to make it more efficient.  I pretty much know what I need to do at this point, but I figured Id offer up a challenge for my readers, to see if they can catch everything I have as well as to see if Ive missed anything.  So to that end, I give you my table: CREATE TABLE [dbo].[lq_ActivityLog]( [ID] [bigint] IDENTITY(1,1) NOT NULL, [PlacementID] [int] NOT NULL, [CreativeID] [int] NOT NULL, [PublisherID] [int] NOT NULL, [CountryCode] [nvarchar](10) NOT NULL, [RequestedZoneID] [int] NOT NULL, [AboveFold] [int] NOT NULL, [Period] [datetime] NOT NULL, [Clicks] [int] NOT NULL, [Impressions] [int] NOT NULL, CONSTRAINT [PK_lq_ActivityLog2] PRIMARY KEY CLUSTERED ( [Period] ASC, [PlacementID] ASC, [CreativeID] ASC, [PublisherID] ASC, [RequestedZoneID] ASC, [AboveFold] ASC, [CountryCode] ASC)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]) ON [PRIMARY] And now some assumptions and additional information: The table has 200,000,000 rows currently PlacementID ranges from 1 to 5000 and should support at least 50,000 CreativeID ranges from 1 to 5000 and should support at least 50,000 PublisherID ranges from 1 to 500 and should support at least 50,000 CountryCode is a 2-character ISO standard (e.g. US) and there is a country table with an integer ID already.  There are < 300 rows. RequestedZoneID ranges from 1 to 100 and should support at least 50,000 AboveFold has values of 1, 0, or 1 only. Period is a date (no time). Clicks range from 0 to 5000. Impressions range from 0 to 5000000. The table is currently write-mostly.  Its primary purpose is to log advertising activity as quickly as possible.  Nothing in the rest of the system reads from it except for batch jobs that pull the data into summary tables. Heres the current information on the database tables size: Design Goals This table has been in use for about 5 years and has performed very well during that time.  The only complaints we have are that it is quite large and also there are occasionally timeouts for queries that reference it, particularly when batch jobs are pulling data from it.  Any changes should be made with an eye toward keeping write performance optimal  while trying to reduce space and improve read performance / eliminate timeouts during read operations. Refactor There are, I suggest to you, some glaringly obvious optimizations that can be made to this table.  And Im sure there are some ninja tweaks known to SQL gurus that would be a big help as well.  Ill post my own suggested changes in a follow-up post for now feel free to comment with your suggestions. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Latest Business Analytics Support News has been released

    - by paul.a
    The latest edition of Business Analytics Support News is now available. You can read our quarterly newsletter Volume 5 Doc ID 1347131.1Featured topics include details on Smartview 64-Bit Support Patch Set Update information for various products Social Media for EPM Documentation plus more Did you miss any of the newsletters and want to find archived copies?  Volumes one to four are all listed on the News Index Doc ID 1347159.1 To ensure you don't miss out on future releases and recent changes you can subscribe to the Product News.More details about the subscription are outlined in the volume 5 "Subscribe to Product Support News" section.

    Read the article

< Previous Page | 421 422 423 424 425 426 427 428 429 430 431 432  | Next Page >