Search Results

Search found 24965 results on 999 pages for 'linux kvm'.

Page 426/999 | < Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >

  • Apache Virtual Hosts behind Cisco Router

    - by Theo
    I'm setting up an Apache 2.2 Ubuntu web server for internal services that is also supposed to be accessed from outside our LAN. Our LAN has a single external IP that is the external IP of our RV042 Cisco router. We have set up several A records on our external DNS server that point to this IP. Our internal DNS server resolve the same records to the internal IP of our web server, so computers from inside the network can access them using the same address as if they were outside. We forwarded the router's external 80 port to our web server's 80 port. I have set up one Virtual Host for each domain name in our list, and my httpd.conf is something like this: ServerName web.domain.com NameVirtualHost *:80 <VirtualHost *:80> ServerName alfresco.domain.com <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass /alfresco http://localhost:8080/alfresco ProxyPassReverse /alfresco http://localhost:8080/alfresco ProxyPass /share http://localhost:8080/share ProxyPassReverse /share http://localhost:8080/share </VirtualHost> <VirtualHost *:80> ServerName crm.domain.com DocumentRoot /var/www/sugarcrm </VirtualHost> Now, this works if we are in our LAN. However, if we are outside of our LAN we reach our web server's default page saying: It Works! This is the default web page for this server. But we can't reach the virtual hosts, as if the domain name is not being preserved when the router forward the packets to the web server. Am I doing something wrong? How can I check what is going on? What should be the settings to make this work from outside?

    Read the article

  • Xen P2V for large physical hosts with much free space

    - by Sirex
    I need to P2V a rhel5 machine to xen under rhel5. I know I can use dd if=/dev/sda then using virt-install --import on the host, but the downside of this is the original machine has 80% free space on its drive. Does anyone know of (or can document) a quick and easy method which works reliably, to produce a bootable xen image which can run under a hvm in such cases ? I tried clonezilla to make the image, to avoid the free space problem, but it failed to do the clone with "something went wrong" (useless info, i know). At the moment im looking at doing a dd of each partition, and a file level copy of the partition which is mostly empty, then creating a new virtual disk, copying the partitions over to it by mounting both the new image and the virtual drive on a second vm, then copying the boot sectors over, then copying the file level backup..... there must be an easier way ? Oh, and budget is $0. :)

    Read the article

  • Convert shell logs (incl. escape characters) to HTML?

    - by dehmann
    Is there tool or a regexp that can convert shell escape characters to HTML code? As an example, here is a logfile from GNU screen: ^MESC[K$ ^MESC[K$ exit Executing .bashrc ESC[00;31;31mserver.xyz.com: ESC[00;34;34m~ which I would like to convert to something like this: $ exit Executing .bashrc <font color=red>server.xyz.com</font>: <font color=blue>~</font> and send as HTML e-mail to an e-mail address, to archive my work. Here is a related question, which shows how to convert it to regular text, but it would be nice to convert to HTML and not just throw the escape characters away.

    Read the article

  • Logging violations of rules in limits.conf

    - by PaulDaviesC
    I am trying to log the details of the programs that where failed due to the limit cap defined in the limits.conf. My initial plan was to do it using the audit system. The idea was to track the system calls related to limits in the limits.conf that where failed. However the problem with this approach is that , it is not possible to track the violations of cpu time, since that violation do not involve failure of system calls. In the case of CPU time , one thing happens is that the program which violated the cpu time will be delivered a SIGXCPU. So my question is how should I go about logging the programs that violated CPU time? Also is there any limits.conf specific logs available?

    Read the article

  • Sniff packets using tcpdump

    - by denisk
    I have a completely noob question. I want to see all packets that come to my computer from particular site (google.com). So I start tcpdump sudo tcpdump -i eth0 host google.com and enter google.com in a browser and hit enter - nothing gets captured. I can't figure out why it happen. What do I do wrong? Edit It appeared that I was listening to the wrong interface. I had changed eth0 to any and it worked. It was ppp1 that needed listening. Thanks for your answers!

    Read the article

  • check_ssh executed from Nagios server returns "Server answer: ", nothing else

    - by phs
    Commmand works on the host I need to monitor (its IP is denoted as $HOSTADDRESS$ here): [root@host ~]# /usr/local/nagios/libexec/check_ssh localhost SSH OK - OpenSSH_4.3 (protocol 2.0) However, on the Nagios server, it does not: root@server:~# /usr/lib/nagios/plugins/check_ssh -H $HOSTADDRESS$ Server answer: I can see that the port is open: root@server:~# /usr/lib/nagios/plugins/check_tcp -H $HOSTADDRESS$ -p 22 TCP OK - 0.123 second response time on port 22|time=0.123277s;;;0.000000;10.000000 And I can verify with telnet: root@server:/etc/nagios3/conf.d# telnet $HOSTADDRESS$ 22 Trying $HOSTADDRESS$... Connected to $HOSTADDRESS$. Escape character is '^]'. After searching the web for two hours and trying different suggestions I am out of ideas. I have several other hosts with similar setup, and they don't have this problem. I have compared the configs and they look the same (I think). I am clearly missing something here.

    Read the article

  • What is the best log rotator for Python wsgi applications ?

    - by Low Kian Seong
    I am running a wsgi based application that has concurrent users accessing it. For my logs needs I tried logrotate but found that logrotate is not too friendly to Python applications, so I tried using RotatingFileHandler and even worse found my logs all chopped up and part of it went missing! I am considering ConcurrentRotatingFileHandler, my question is, has anyone out there experienced the same thing and better yet do you have any battle tested solution for Python wsgi, concurrently accessed applications?

    Read the article

  • Ubuntu+Win7--disk error press any key to restart

    - by Siddharth
    Apparently,none of the solutions in any other posts and forums worked for me For some reasons I decided to remove ubuntu from my hard disk drive. My partition table(presently): (/dev/sda1) (fat32) 900 MiB ---(MBR,I suppose) (/dev/sda2) (ntfs) 70 GiB -----(Windows 7) (/dev/sda3) (ntfs) 314.88 GiB --(Personal File storage) (/dev/sda4) (ext4) 80 GiB -----(Ubuntu 13.04) (unallocated) -----1.31 MiB So,after moving(cut-paste) everything(for backup) from the fat32 partition using win7..I booted into Ubuntu and copied the remaining 3 files(hidden in Win7 file explorer) --bootmgr,bootsect.bak,and one more which I do not remember.TERRIBLE MISTAKE After this I again booted into Windows and deleted ext4 partition..formatted it to ntfs..and shut down the pc.Then,I put in a Win7 bootable USB..using command prompt I entered bootrec /fixmbr,and bootrec /fixboot.. Restarting showed me the GRUB..choosing windows 7 showed me "Disk Error. Press any key to restart." I also installed a fresh Win7 installation on the 80 GiB partition expecting a Windows Legacy Bootloader with two win7 options..but did not work. Then..I used a Ubuntu LiveUSB to put it back to the present configuration(above) since all methods to restore the MBR failed.. I copied back the fat32 partitions backup files but couldn't copy those 3 files.Somehow ,they had been recreated and were non-replaceable. I do not want to format the win7 partition for a fresh one. I have used boot-repair..Restore MBR option brings back to "Disk error...." without even going through grub..so I reinstalled grub and I'm able to boot into Ubuntu. grub menu shows the win7 option as "Windows 7 (loader) (on /dev/sda1)". paste.ubuntu.com/5753710 paste.ubuntu.com/5775999

    Read the article

  • How to properly start gvfs without gnome?

    - by 9000
    I have a Debian testing box with Xfce (no Gnome, no Nautilus). It has all gvfs-related stuff installed, including all backends and fuse interface. But any attempts to gvfs-mount anything (like sftp://... or smb://...) fail with error opening file: Operation not supported, and gigolo shows only 'unix device (file)' in the list of supported protocols. My ~/.gvfs has rwx permissions, and I'm a member of fuse group; other fuse-related stuff works for me. What do I do? Where to look?

    Read the article

  • Add the "SAMBA File Server" role to a server running SCO Unix?

    - by I.T. Support
    We're trying to get network access to a hard drive on a server running SCO Unix from Windows Servers. I beleive we need to add the role "SAMBA File Server" to the server so we can mount the drive as a network share that we can access from Windows. Is it possible to add the SAMBA role to a SCO Unix operating system? Are there any gotchas or concerns? Thanks

    Read the article

  • How do I stop someone from saturating my line & wasting CPU cycles

    - by JoshRibs
    My web host shows inbound & outbound traffic with mrtg. I have a steady 3.5mbps inbound traffic from Nigeria. Even assuming the source IPs & destination ports are blocked with Iptables & verifying nothing is listening on those ports, will the traffic still always pass through the switch & "get" to my server (where my server wastes CPU cycles "dropping" the packets)? Assuming I was setup with a hardware firewall, the traffic would still show in mrtg assuming the firewall is behind the switch? So is there any way to stop someone from saturating your 100mbps line, if they also have a 100mbps line? Other than filing an abuse complaint with the kind folks in Nigeria?

    Read the article

  • SSH without portforward

    - by maigel
    I have a raspberry pi lying around in my dorm room. It's connected to campus internet which has all ports closed and I obviously don't have any access or permission to port forwarding. Now I want to ssh to the raspberry pi but this isn't possible since I can't port forward. I do however have a cheap vps doing nothing. Is there a way to make the pi connect to the vps and then use the vps as some sort of tunnel to ssh to the raspberry pi without having any port forwarding done?

    Read the article

  • How do you backup your own files? [on hold]

    - by Antonis Christofides
    I'm a system administrator and I use rsnapshot to backup some servers, duplicity for some others. Both work fine, each one with advantages and disadvantages. Despite that, I am at a loss on how to backup my own private files. I'd use duplicity to automatically backup my files to a remote server; but the problem is that once in a while I must do a full backup. My emails and important files are 9G, and I expect this to increase. Uploading through aDSL at 1Mbit would be 20 hours. Too much. rsnapshot doesn't require periodic full backups (only the first time), but it must be running on the remote server and have a means to connect to my computer; if the server is compromised (or simply if the NSA decides to use it), my own machine is also compromised. Not good. The only solution I've come up with is use encfs, use unison to synchronize the files to a remote server, and use duplicity or rsnapshot on the remote server to backup these files. In that case, the question is whether I can sync the files on many computers; is it possible for encfs to be used with the same key on many computers? I also think that if I append one character to the unencrypted file, its encrypted encfs counterpart might change a lot, so that incrementals with duplicity would be less efficient—but not a big deal. Maybe also, when I need to restore a file, finding the correct file to restore could be a pain, because of filename encryption. I wonder whether there is any other possibility that I've overlooked. Maybe I'm asking too much for my personal use, and I should settle with an external disk?

    Read the article

  • How to restore default iPod playlists on Amarok?

    - by obvio171
    I wanted to "reset" the collection on my iPod and ended up accidentally deleting, through Amarok, all the playlists, including the default ones like "Most Played" and "Highest Rated". Since these are dynamic playlists with a special meaning for iPod, I don't think creating new, normal playlists with the same name will bring their special behavior back. How do I restore them with the same dynamic functionality? Is there a way to do that on Amarok? Rhythmbox? GTKPod? Command line? P.S.: not entirely sure what the policy about iPod questions are, but this one in particular seems to me to be very computer-related because, although it's about interfacing with a device, everything has to be done on my computer, using standard PC libraries/programs, etc. If it's still off-topic, please point me to where I could post it.

    Read the article

  • Does Gedit have cool keyboard shortcuts?

    - by Kelp
    I have used Vim before and I love the keyboard shortcuts, but I hate having to copy and paste, so I am looking for a text editor that makes it easier. I have been trying Gedit. It's cool. But I really miss the being to create a new line, going to the end of the line, going to the beginning of the line, deleting a line with keyboard shortcuts. I tried to look up "gedit keyboard shortcuts" but all it came up with was how to save a file. Basic things.

    Read the article

  • How to search a text file for strings between two tokens in Ubuntu terminal and save the output?

    - by Blue
    How can I search a text file for this pattern in Ubuntu terminal and save the output as a text file? I'm looking for everything between the string "abc" and the string "cde" in a long list of data. For example: blah blah abc fkdljgn cde blah blah blah blah blah blah abc skdjfn cde blah In the example above I would be looking for an output such as this: fkdljgn skdjfn It is important that I can also save the data output as a text file. Can I use grep or agrep and if so, what is the format?

    Read the article

  • I need to somehow change my ip address

    - by tric
    hello. i`m in a lan using iptables/masquerade. what i want to do, is to login in a web application.i write my user and passwd and click login and everything is fine, but if i try to modify something in that aplication it tells me that i have a wrong ip address.i knwo for sure that this app only allows ip 10.3.x.x .how can i trick that application to think that i have an ip from class 10.3.x.x and not my wan ip? 10x sorry for my bad english!

    Read the article

  • Lots of files being used by blank web page. What are they?

    - by byronyasgur
    I am trying to optimise a website and I was using the network waterfall facility in Google Chrome. When I looked at the results there were lots of files which I didnt recognise. I first thought they might be something to do with Google Chrome itself, so I put a blank HTML file on my desktop and checked but there was nothing in the waterfall except the file itself. So I put a blank file on my server and I got the output below. What are all these files, are they all necessary, is this normal and do I need to be in any way concerned. My hosting provider has always been excellent in every regard that I'm aware of. My host is shared hosting, using cpanel and is based on a LAMP server. I also note that a couple of those file have problems but I have no idea how to fault find that or whether it's a concern. EDIT: I have cleared the cache so I don't think it's a browser cache issue.

    Read the article

  • Setting umask for all users

    - by Yarin
    I'm trying to set the default umask to 002 for all users including root on my CentOS box. According to this and other answers, this can be achieved by editing /etc/profile. However the comments at the top of that file say: It's NOT a good idea to change this file unless you know what you are doing. It's much better to create a custom.sh shell script in /etc/profile.d/ to make custom changes to your environment, as this will prevent the need for merging in future updates. So I went ahead and created the following file: /etc/profile.d/myapp.sh with the single line: umask 002 Now, when I create a file logged in as root, the file is born with 664 permissions, the way I had hoped. But files created by my Apache wsgi application, or files created with sudo, still default to 644 permissions... $ touch newfile (as root): Result = 664 (Works) $ sudo touch newfile: Result = 644 (Doesn't work) Files created by Apache wsgi app: Result = 644 (Doesn't work) Files created by Python's RotatingFileHandler: Result = 644 (Doesn't work) Why is this happening, and how can I ensure 664 file permissions system wide, no matter what creates the file? UPDATE: I ended up finding a cleaner solution to this on a per-directory basis using ACLs, which I describe here.

    Read the article

  • Can't mount hard drive. Ubuntu 12.04

    - by Sam
    I am trying to recover some pictures on my 320 GB Hard Disk, so I put in a Live Ubuntu CD and am in that right now. In the devices list, it shows my USB drive, but not my 320 GB Hard Disk. I can see the disk in Disk Utility (it says it's on /dev/sda), but it's not mounted, and it says it has a few bad sectors but it is OK. In Disk Usage Analyzer, it says my maximum capacity is 13.4 GB, so it's definitely not using the 320 GB Hard Disk. I tried the following: sudo mkdir /media/newhd (worked) sudo mount /dev/sda /media/newhd (didn't work. it says I must specify the filesystem type) I then tried: fsck.ext4 -f /dev/sda (didn't work. Said: Superblock invalid, trying to backup blocks. then: Bad magic number in super-block while trying to open /dev/sda. The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock) Does anyone have any ideas? The whole problem started when my Windows Vista said "Can't find operating system". Any ideas on how I can get on to my hard drive at /dev/sda?

    Read the article

  • HTTPS and HTTP issue on server with SSL

    - by Asghar
    I have a site www.example.com for which i purchased SSL cert and installed. And it was working fine, I also have a subdomain with app.example.com which was not on SSL. Both www.example.com and app.example.com are on same IP address. At later we decided to put SSL only on app.frostbox.com and then i configured SSL with app.frostbox.com and it worked fine, Now the issue is that Google is indexing my site as https://www.example.com/ and when users hits the web , Invalid security warning is issued and when user allow security issue they are shown my app.example.com contents. Note: I have my SSL configuration files in /etc/httpd/conf.d/ssl.conf The contents of the ssl.conf are below. NOTE: I tried solutions in .httaccess but none of those worked. Like redirecting 301 redirects etc http://pastebin.com/GCWhpQJq

    Read the article

  • Unable to set initcwnd on a Hetzner server

    - by Sergi
    We just ordered a bunch of Hetzner EX40SSD servers with the minimal Debian install image that they provide and everything is just fine except that looking at tcpdumps for fine tuning the network from various locations the initcwnd param seems to be stuck at 6 no matter how we change it. By default Debian 3.2 kernels should have that setting to 10 so it's pretty strange. Is it possible that the NIC driver or a custom setting in the Hetzner Debian image is limiting this param? Even if we set it to 4, like the old kernel default, it doesn't work. Any ideas would be much appreciated! Does anyone know if the NIC drivers provided by default by Debian have some kind on limitation. In a long thread in http://www.webhostingtalk.com/showthread.php?t=1200617&highlight=hetzner they talk about a page http://wiki.hetzner.de/index.php/Installation_des_r8168-Treibers/en where Hetzner states that the included Realtek r8168 driver is not working properly, but nowhere do they say that the initcwnd could be affected. Tomorrow i will try to install a CentOs image and see if Debian is the problem...Last resort would be to install a custom debian image, but that is a pain in the ass! Thanks!

    Read the article

  • Routing with VPN and asymmetric communication

    - by Louis
    I'm stumbling on a problem that requires your advice. Keywords : networking, route, openVPN Problem : I have a local network with several physical servers and VMs. These machines have ip's in the range 10.10.x.x. I can access these machines from the Internet with the help of openVPN. These machines can : access each other within the local 10.10.x.x subnet access the Internet via the VPN can themselves be accessed (via SSH) from the Internet via the VPN. There is one machine however that behaves strangely and I don't know why. I can SSH into this machine from anywhere via SSH and I can also PING it from anywhere (including the Internet). However from this machine (i.e. when logged into it) I cannot access the Internet or ping machines outside the local network. In other words it will not go beyond the VPN. My question is why? Here are some technical details: The machine's Network Config (running Debian 6.0.3): allow-hotplug eth0 iface eth0 inet static address 10.10.10.200 netmask 255.255.0.0 network 10.10.10.0 broadcast 10.10.10.255 gateway 10.10.10.200 The machine's Routing : Destination Gateway Genmask Flags MSS Window irtt Iface 127.0.0.1 0.0.0.0 255.255.255.255 UH 0 0 0 lo 10.10.0.0 10.10.10.250 255.255.0.0 UG 0 0 0 eth0 10.10.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.10.10.250 0.0.0.0 UG 0 0 0 eth0 0.0.0.0 10.10.10.200 0.0.0.0 UG 0 0 0 eth0 The VPN's Network Config (running Debian 6.0.3): # This is the local network interface auto eth1 allow-hotplug eth1 iface eth1 inet static address 10.10.10.250 netmask 255.255.0.0 broadcast 10.10.10.255 gateway 10.10.10.250 The VPN's routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.10.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tun0 private 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.10.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 10.10.10.250 0.0.0.0 UG 0 0 0 eth1 0.0.0.0 private 0.0.0.0 UG 0 0 0 eth0 net.ipv4.ip_forward = 1 on both machines. there are no iptables set anywhere. Thanks in advance for any feedback.

    Read the article

< Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >