Search Results

Search found 11427 results on 458 pages for 'live cd'.

Page 426/458 | < Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >

• NVIDIA x server - "sudo nvidia config" does not generate a working 'xorg.config'

  - by Mike

  I am over 18 hours deep on this challenge. I got to this point and am stuck. very stuck. Maybe you can figure it out? Ubuntu Version 12.04 LTS with all the updates installed. Problem: The default settings in "etc/X11/xorg.conf" that are generated by the "nvidia-xconfig" tool, do not allow the NVIDIA x server to connect to the driver in my "System Settings Additional Driver window". (that's how I understand it. Lots of information below). Symptoms of Problem "System Settings Additional Driver" window has drivers, but the nvidia x server cannot connect/utilize any of the 4 drivers. the drivers are activated, but not in use. When I go to "System Tools Administration NVIDIA x server settings" I get an error that basically tells me to create a default file to initialize the NVIDIA X server (screen shot below). This is the messages the terminal gives after running a "sudo nvidia-xconfig" command for the first time. It seems that the generated file by the tool i just ran is generating a bad/unusable file: If I run the "sudo nvidia-xconfig" command again, I wont get an error the second time. However when I reboot, the default file that is generated (etc/X11/xorg.conf) simply puts the screen resolution at 800 x 600 (or something big like that). When I try to go to NVIDIA x server settings I am greeted with the same screen as the screen shot as in symptom 2 (no option to change the resolution). If I try to go to "system settings display" there are no other resolutions to choose from. At this point I must delete the newly minted "xorg.conf" and reinstate the original in its place. Here are the contents of the "xorg.conf" that is generated first (the one missing required information): # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 304.88 (buildmeister@swio-display-x86-rhel47-06) Wed Mar 27 15:32:58 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Hardware: I ran the "lspci|grep VGA". There results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) More Hardware info: Ram: 16GB CPU: Intel Core i7-2720QM @2.2GHz * 8 Other: 64 bit. This is a triple boot computer and not a VM. Attempts With Not Success on My End: 1) Tried to append the "xorg.conf" with what I perceive is missing information and obviously it didn't fly. 2) All the other stuff I tried got me to this point. 3) See if this link is helpful to you (I barely get it, but i get enough knowing that a smarter person might find this useful): http://manpages.ubuntu.com/manpages/lucid/man1/nvidia-xconfig.1.html 4) I am completely new to Linux (40 hours over past week), but not to programming. However I am very serious about changing over to Linux. When you respond (I hope someone responds...) please respond in a way that a person new to Linux can understand. 5) By the way, the reason I am in this mess is because I MUST have a second monitor running from my laptop, and "System Settings Display" doesn't recognize my second display. I know it is possible to make the second display work in my system, because when I boot from the install CD, I perform work on the native laptop monitor, but the second monitor shows a purple screen with Ubuntu in the middle, so I know the VGA port is sending a signal out. If this is too much for you to tackle please suggest an alternative method to get a second display. I don't want to go to windows but I cannot have a single display. I am really fudged here. I hope some smart person can help. Thanks in advance. Mike. **********************EDIT #1********************** More Details About Graphics Card I was asked "which brand of nvidia-card do you have exactly?" Here is what I did to provide more info (maybe relevant, maybe not, but here is everything): 1) Took my Lenovo W520 right apart to see if there is an identifier on the actual card. However I realized that if I get deep enough to take a look, the laptop "won't like it". so I put it back together. Figuring out the card this way is not an option for me right now. 2) (My computer is triple boot) I logged into Win7 and ran 'dxdiag' command. here is the screen shot: 3) I tried to look on the lenovo website for more details... but no luck. I took a look at my receipts and here is info form receipt: System Unit: W520 NVIDIA Quadro 1000M 2GB 4) In win7 I went to the NVIDIA website and used the option to have my card 'scanned' by a Java applet to determine the latest update for my card. I tried the same with Ubuntu but I can't get the applet to run. Here is the recommended driver from from the NVIDIA Applet for my card for Win7 (I hope this shines some light on the specifics of the card): Quadro/NVS/Tesla/GRID Desktop Driver Release R319 Version: 320.00 WHQL Release Date: 3.5.2013 5) Also I went on the NVIDIA driver search and looked through every possible combination of product type + product series + product to find all the combinations that yield a 1000M card. My card is: Product Type: Quadro Product Series: Quadro Series (Notebooks) Product: 1000M ***********************EDIT #2******************* Additional Symptoms Another question that generated more symptoms I previously didn't mention was: "After generating xorg.conf by nvidia-xconfig, go to additional drivers, do you see nvidia-304?" 1) I took a screen shot of the "additional drivers" right after generating xorg.conf by nvidia-xconfig. Here it is: 2) Then I did a reboot. Now Ubuntu is 600 x 800 resolution. When I logged in after the computer came up I got an error (which I always get after generating xorg.conf by nvidia-xconfig and rebooting) 3) To finally answer the question - No. There is no "NVIDIA-304" driver. Screen shot of additional drivers after generating xorg.conf by nvidia-xconfig and rebooting : At this point I revert to the original xorg.conf and delete the xorg.conf generated by Nvidia.

  Read the article

• Welcome to Jackstown

  - by fatherjack

  I live in a small town, the population count isn't that great but let me introduce you to some of the population. We'll start with Martin the Doc, he fixes up anything that gets poorly, so much so that he could be classed as the doctor, the vet and even the garage mechanic. He's got a reputation that he can fix anything and that hasn't been proved wrong yet. He's great friends with Brian (who gets called "Brains") the teacher who seems to have a sound understanding of any topic you care to pass his way. If he isn't sure he tells you and then goes to find out and comes back with a full answer real quick. Its good to have that sort of research capability close at hand. Brains is also great at encouraging anyone who needs a bit of support to get them up to speed and working on their jobs. Steve sees Brains regularly, that's because he is the librarian, he keeps all sorts of reading material and nowadays there's even video to watch about any topic you like. Steve keeps scouring all sorts of places to get the content that's needed and he keeps it in good order so that what ever is needed can be found quickly. He also has to make sure that old stuff gets marked as probably out of date so that anyone reading it wont get mislead. Over the road from him is Greg, he's the town crier. We don't have a newspaper here so Greg keeps us all informed of what's going on "out of town" - what new stuff we might make use of and what wont work in a small place like this. If we are interested he goes ahead and gets people in to demonstrate their products  and tell us about the details. Greg is pretty good at getting us discounts too. Now Greg's brother Ian works for the mayors office in the "waste management department" nowadays its all about the recycling but he still has to make sure that the stuff that cant be used any more gets disposed of properly. It depends on the type of waste he's dealing with that decides how it need to be treated and he has to know a lot about the different methods and when to use which ones. There are two people that keep the peace in town, Brent is the detective, investigating wrong doings and applying justice where necessary and Bart is the diplomat who smooths things over when any people have a dispute or disagreement. Brent is meticulous in his investigations and fair in the way he handles any situation he finds. Discretion is his byword. There's a rumour that Bart used to work for the United Nations but what ever his history there is no denying his ability to get apparently irreconcilable parties working together to their combined benefit. Someone who works closely with Bart is Brad, he is the translator in town. He has several languages that he can converse in but he can also explain things from someone's point of view or  and make it understandable to someone else. To keep things on the straight and narrow from a legal perspective is Ben the solicitor, making sure we all abide by the rules.Two people who make for an interesting evening's conversation if you get them together are Aaron and Grant, Aaron is the local planning inspector and Grant is an inventor of some reputation. Anything being constructed around here needs Aarons agreement. He's quite flexible in his rules though; if you can justify what you want to do with solid logic but he wont stand for any development going on without his inclusion. That gets a demolition notice and there's no argument. Grant as I mentioned is the inventor in town, if something can be improved or created then Grant is your man. He mainly works on his own but isnt averse to getting specific advice and assistance from specialist from out of town if they can help him finish his creations.There aren't too many people left for you to meet in the town, there's Rob, he's an ex professional sportsman. He played Hockey, Football, Cricket, you name it. He was in his element as goal keeper / wicket keeper and that shows in his personal life. He just goes about his business and people often don't even know that he's helped them. Really low profile, doesn't get any glory but saves people from lots of problems, even disasters on occasion. There goes Neil, he's a bit of an odd person, some people say he's gifted with special clairvoyant powers, personally I think he's got his ear to the ground and knows where to find out the important news as soon as its made public. Anyone getting a visit from Neil is best off to follow his advice though, he's usually spot on and you wont be caught by surprise if you follow his recommendations – wherever it comes from.Poor old Andrew is the last person to introduce you to. Andrew doesn't show himself too often but when he does it seems that people find a reason to blame him for their problems, whether he had anything to do with their predicament or not. In all honesty, without fail, and to his great credit, he takes it in good grace and never retaliates or gets annoyed when he's out and about.  It pays off too as its very often the case that those who were blaming him recently suddenly find they need his help and they readily forget the issues pretty rapidly.And then there's me, what do I do in town? Well, I'm just a DBA with a lot of hats. (Jackstown Pop. 1)

  Read the article

• IBM Keynote: (hardware,software)–>{IBM.java.patterns}

  - by Janice J. Heiss

  On Sunday evening, September 30, 2012, Jason McGee, IBM Distinguished Engineer and Chief Architect Cloud Computing, along with John Duimovich IBM Distinguished Engineer and Java CTO, gave an information- and idea-rich keynote that left Java developers with much to ponder.Their focus was on the challenges to make Java more efficient and productive given the hardware and software environments of 2012. “One idea that is very interesting is the idea of multi-tenancy,” said McGee, “and how we can move up the spectrum. In traditional systems, we ran applications on dedicated middleware, operating systems and hardware. A lot of customers still run that way. Now people introduce hardware virtualization and share the hardware. That is good but there is a lot more we can do. We can share middleware and the application itself.” McGee challenged developers to better enable the Java language to function in these higher density models. He spoke about the need to describe patterns that help us grasp the full environment that an application needs, whether it’s a web or full enterprise application. Developers need to understand the resources that an application interacts with in a way that is simple and straightforward. The task is to then automate that deployment so that the complexity of infrastructure can be by-passed and developers can live in a simpler world where the cloud can automatically configure the needed environment. McGee argued that the key, something IBM has been working on, is to use a simpler pattern that allows a cloud-based architecture to embrace the entire infrastructure required for an application and make it highly available, scalable and able to recover from failure. The cloud-based architecture would automate the complexity of setting up and managing the infrastructure. IBM has been trying to realize this vision for customers so they can describe their Java application environment simply and allow the cloud to automate the deployment and management of applications. “The point,” explained McGee, “is to package the executable used to describe applications, to drop it into a shared system and let that system provide some intelligence about how to deploy and manage those applications.”John Duimovich on Improvements in JavaMcGee then brought onstage IBM’s Distinguished Engineer and CTO for Java, John Duimovich, who showed the audience ways to deploy Java applications more efficiently.Duimovich explained that, “When you run lots of copies of Java in the cloud or any hypervisor virtualized system, there are a lot of duplications of code and jar files. IBM has a facility called ‘shared classes’ where we put shared code, read only artefacts in a cache that is sharable across hypervisors.” By putting JIT code in ahead of time, he explained that the application server will use 20% less memory and operate 30% faster.  He described another example of how the JVM allows for the maximum amount of sharing that manages the tenants and file sockets and memory use through throttling and control. Duimovich touched on the “thin is in” model and IBM’s Liberty Profile and lightweight runtime for the cloud, which allows for greater efficiency in interacting with the cloud.Duimovich discussed the confusion Java developers experience when, for example, the hypervisor tells them that that they have 8 and then 4 and then 16 cores. “Because hypervisors are virtualized, they can change based on resource needs across the hypervisor layer. You may have 10 instances of an operation system and you may need to reallocate memory, " explained Duimovich.  He showed how to resize LPARs, reallocate CPUs and migrate applications as needed. He explained how application servers can resize thread pools and better use resources based on information from the hypervisors.Java Challenges in Hardware and SoftwareMcGee ended the keynote with a summary of upcoming hardware and software challenges for the Java platform. He noted that one reason developers love Java is it allows them to ignore differences in hardware. He stated that the most important things happening in hardware were in network and storage – in developments such as the speed of SSD, the exploitation of high-speed, low-latency networking, and recent developments such as storage-class memory, and non-volatile main memory. “So we are challenged to maintain the benefits of Java and the abstraction it provides from hardware while still exploiting the new innovations in hardware,” said McGee.McGee discussed transactional messaging applications where developers send messages transactionally persist a message to storage, something traditionally done by backing messages on spinning disks, something mostly outdated. “Now,” he pointed out, “we would use SSD and store it in Flash and get 70,000 messages a second. If we stored it using a PCI express-based flash memory device, it is still Flash but put on a PCI express bus on a card closer to the CPU. This way I get 300,000 messages a second and 25% improvement in latency.” McGee’s central point was that hardware has a huge impact on the performance and scalability of applications. New technologies are enabling developers to build classes of Java applications previously unheard of. “We need to be able to balance these things in Java – we need to maintain the abstraction but also be able to exploit the evolution of hardware technology,” said McGee. According to McGee, IBM's current focus is on systems wherein hardware and software are shipped together in what are called Expert Integrated Systems – systems that are pre-optimized, and pre-integrated together. McGee closed IBM’s engaging and thought-provoking keynote by pointing out that the use of Java in complex applications is increasingly being augmented by a host of other languages with strong communities around them – JavaScript, JRuby, Scala, Python and so forth. Java developers now must understand the strengths and weaknesses of such newcomers as applications increasingly involve a complex interconnection of languages.

  Read the article

• Open World Day 3

  - by Antony Reynolds

  A Day in the Life of an Oracle OpenWorld Attendee Part IV My third day was exhibition day for me!  I took the opportunity to wander around the JavaOne and OpenWorld exhibitions to see what might be useful for me when selling WebLogic, Coherence & SOA Suite.  I found a number of interesting vendors and thought I would share what I found here.  These are not necessarily endorsements, but observations on companies that I thought had interesting looking products that fill a need I have seen at customers. Highly Available EBS Upgrades A few years ago I worked with a customer that was a port authority.  They wanted to tie E-Business Suite into their operations to provide faster processing of cargo and passengers.  However they only had a 2 hour downtime window to perform upgrades.  This was not a problem for core database and middleware technology, this could accommodate those upgrade timescales easily.  It was a problem for EBS however so I intrigued to find Rapid E-Suite Inc offering an 11i to 12i upgrade service that claims to require no outage.  This could be a real boon to EBS customers like my port friends that need to upgrade without disruption to their business. Mobile on WebLogic I have come across a number of customers who want a comprehensive mobile solution, connected and disconnected operation and so forth.  ADF only addresses part of these requirements currently so I was excited to discover mFrontiers Inc offering an apparently comprehensive solution that should integrate easily with Oracle SOA Suite to mobile enable a SOA infrastructure.  The ability to operate without a network is important for many applications, particularly in industries that require their engineers to enter buildings to perform maintenance or repairs, because network access is not always available – many of my colleagues don’t have mobile access from their homes because they live in the middle of nowhere – and disconnected support is crucial in these situations. Sharepoint Connector for WebCenter Content Obviously Sharepoint is an evil pernicious intrusion into a companies IT estate but it is widely deployed and many people like it but also would like to take advantage of Oracle products such as WebCenter Content.  So I was encouraged to see that Fishbowl Solutions have created a connector for Sharepoint that allows it to bring in content from WebCenter, it looks like a valuable way to maintain the Sharepoint interface end users are used to but extend the range of content by pulling stuff (technical term for content) from WebCenter.   Load Balancing The Enterprise Deployment Guides are Oracles bible on building highly available FMW environments, and each of them requires a front end load balancer.  I have been asked to help configure F5 Load Balancers on a number of occasions over my time at Oracle and each time I come back to it I find more useful features have been added to the BigIP line of load balancers that F5 sell, many of their documents are tailored to FMW.  I like F5, they provide (relatively) easy to use products that do what they say on the side of the box.  They may not have all the bells and whistles of some of their more expensive competitors but they do the job and do it well!  Besides which I like their logo! Other Stuff I saw lots of other interesting products and services, such as a lightweight monitoring tool for Coherence, Forms migration services, JCAPS migration services and lots of cool freebies to take home to the children! A Quiet Night Wednesday night was the partner appreciation event and I had decided to go back to the hotel and have an early night.  I decided to attend the last session of the day – a Maven/Hudson/WebLogic tutorial.  I got the wrong hotel for the session and snuck in 20 minutes late at the back and starting working on the hands on workshop.  One of my co-attendees raised his hand for help and as the presenter came over to help he suddenly stopped and yelled – “Is that Antony”!  It was my old friend Steve Button who used to be based in Redwood Shores but is now a WebLogic guru PM in Australia.  It was good to catch up with him.  As he yelled out a guy with really bad posture turned around to see who he was talking to, this turned out to be my friend Simon Haslan, Oracle ACE from the UK.  After the tutorial Simon and I retired to the coffee shop to catch up and share stories.  2 and half hours later we decided it was time to retire, so much for an early night but great to renew old friendships and find out what real customers are worrying about.

  Read the article

• Windows Azure Recipe: Enterprise LOBs

  - by Clint Edmonson

  Enterprises are more and more dependent on their specialized internal Line of Business (LOB) applications than ever before. Naturally, the more software they leverage on-premises, the more infrastructure they need manage. It’s frequently the case that our customers simply can’t scale up their hardware purchases and operational staff as fast as internal demand for software requires. The result is that getting new or enhanced applications in the hands of business users becomes slower and more expensive every day. Being able to quickly deliver applications in a rapidly changing business environment while maintaining high standards of corporate security is a challenge that can be met right now by moving enterprise LOBs out into the cloud and leveraging Azure’s Access Control services. In fact, we’re seeing many of our customers (both large and small) see huge benefits from moving their web based business applications such as corporate help desks, expense tracking, travel portals, timesheets, and more to Windows Azure. Drivers Cost Reduction Time to market Security Solution Here’s a sketch of how many Windows Azure Enterprise LOBs are being architected and deployed: Ingredients Web Role – this will host the core of the application. Each web role is a virtual machine hosting an application written in ASP.NET (or optionally php, or node.js). The number of web roles can be scaled up or down as needed to handle peak and non-peak traffic loads. Many Java based applications are also being deployed to Windows Azure with a little more effort. Database – every modern web application needs to store data. SQL Azure databases look and act exactly like their on-premise siblings but are fault tolerant and have data redundancy built in. Access Control – this service is necessary to establish federated identity between the cloud hosted application and an enterprise’s corporate network. It works in conjunction with a secure token service (STS) that is hosted on-premises to establish the corporate user’s identity and credentials. The source code for an on-premises STS is provided in the Windows Azure training kit and merely needs to be customized for the corporate environment and published on a publicly accessible corporate web site. Once set up, corporate users see a near seamless single sign-on experience. Reporting – businesses live and die by their reports and SQL Azure Reporting, based on SQL Server Reporting 2008 R2, can serve up reports with tables, charts, maps, gauges, and more. These reports can be accessed from the Windows Azure Portal, through a web browser, or directly from applications. Service Bus (optional) – if deep integration with other applications and systems is needed, the service bus is the answer. It enables secure service layer communication between applications hosted behind firewalls in on-premises or partner datacenters and applications hosted inside Windows Azure. The Service Bus provides the ability to securely expose just the information and services that are necessary to create a simpler, more secure architecture than opening up a full blown VPN. Data Sync (optional) – in cases where the data stored in the cloud needs to be shared internally, establishing a secure one-way or two-way data-sync connection between the on-premises and off-premises databases is a perfect option. It can be very granular, allowing us to specify exactly what tables and columns to synchronize, setup filters to sync only a subset of rows, set the conflict resolution policy for two-way sync, and specify how frequently data should be synchronized Training Labs These links point to online Windows Azure training labs where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

  Read the article

• Five Ways Enterprise 2.0 Can Transform Your Business - Q&A from the Webcast

  - by [email protected]

  A few weeks ago, Vince Casarez and I presented with KMWorld on the Five Ways Enterprise 2.0 Can Transform Your Business. It was an enjoyable, interactive webcast in which Vince and I discussed the ways Enterprise 2.0 can transform your business and more importantly, highlighted key customer examples of how to do so. If you missed the webcast, you can catch a replay here. We had a lot of audience participation in some of the polls we conducted and in the Q&A session. We weren't able to address all of the questions during the broadcast, so we attempted to answer them here: Q: Which area within your firm focuses on Web 2.0? Meaning, do you find new departments developing just to manage the web 2.0 (Twitter, Facebook, etc.) user experience or are you structuring current departments? A: There are three distinct efforts within Oracle. The first is around delivery of these Web 2.0 services for enterprise deployments. This is the focus of the WebCenter team. The second effort is injecting these Web 2.0 services into use cases that drive the different enterprise applications. This effort is focused on how to manage these external services and bring them into a cohesive flow for marketing programs, customer care, and purchasing. The third effort is how we consume these services internally to enhance Oracle's business delivery. It leverages the technologies and use cases of the first two but also pushes the envelope with regards to future directions of these other two areas. Q: In a business, Web 2.0 is mostly like action logs. How can we leverage the official process practice versus the logs of a recent action? Example: a system configuration modified last night on a call out versus the official practice that everybody would use in the morning.A: The key thing to remember is that most Web 2.0 actions / activity streams today are based on collaboration and communication type actions. At least with public social sites like Facebook and Twitter. What we're delivering as part of the WebCenter Suite are not just these types of activities but also enterprise application activities. These enterprise application activities come from different application modules: purchasing, HR, order entry, sales opportunity, etc. The actions within these systems are normally tied to a business object or process: purchase order/customer, employee or department, customer and supplier, customer and product, respectively. Therefore, the activities or "logs" as you name them are able to be "typed" so that as a viewer, you can filter or decide to see only certain types of information. In your example, you could have a view that only showed you recent "configuration" changes and this could be right next to a view that showed off the items to be watched every morning. Q: It's great to hear about customers using the software but is there any plan for future webinars to show what the products/installs look like? That would be very helpful.A: We don't have a webinar planned to show off the install process. However, we have a viewlet that's posted on Oracle Technology Network. You can see it here:http://www.oracle.com/technetwork/testcontent/wcs-install-098014.htmlAnd we've got excellent documentation that walks you through the steps here:http://download.oracle.com/docs/cd/E14571_01/install.1111/e12001/install.htmAnd there's a whole set of demos and examples of what WebCenter can do at this URL:http://www.oracle.com/technetwork/middleware/webcenter/release11-demos-097468.html Q: How do you anticipate managing metadata across the enterprise to make content findable?A: We need to first make sure we are all talking about the same thing when we use a word like "metadata". Here's why...  For a developer, metadata means information that describes key elements of the portal or application and what the portal or application can do. For content systems, metadata means key terms that provide a taxonomy or folksonomy about the information that is being indexed, ordered, and managed. For business intelligence systems, metadata means key terms that provide labels to groups of data that most non-mathematicians need to understand. And for SOA, metadata means labels for parts of the processes that business owners should understand that connect development terminology. There are also additional requirements for metadata to be available to the team building these new solutions as well as requirements to make this metadata available to the running system. These requirements are often separated by "design time" and "run time" respectively. So clearly, a general goal of managing metadata across the enterprise is very challenging. We've invested a huge amount of resources around Oracle Metadata Services (MDS) to be able to provide a more generic system for all of these elements. No other vendor has anything like this technology foundation in their products. This provides a huge benefit to our customers as they will now be able to find content, processes, people, and information from a common set of search interfaces with consistent enterprise wide results. Q: Can you give your definition of terms as to document and content, please?A: Content applies to a broad category of information from Word documents, presentations and reports through attachments to invoices and/or purchase orders. Content is essentially any type of digital asset including images, video, and voice. A document is just one type of content. Q: Do you have special integration tools to realize an interaction between UCM and WebCenter Spaces/Services?A: Yes, we've dedicated a whole team of engineers to exploit the key features of Oracle UCM within WebCenter.  While ensuring that WebCenter can connect to other non-Oracle systems, we've made sure that with the combined set of Oracle technology, no other solution can match the combined power and integration.  This is part of the Oracle Fusion Middleware strategy which is to provide best in class capabilities for Content and Portals.  When combined together, the synergy between the two products enables users to quickly add capabilities when they are needed.  For example, simple document sharing is part of the combined product offering, but if legal discovery or archiving is required, Oracle UCM product includes these capabilities that can be quickly added.  There's no need to move content around or add another system to support this, it's just a feature that gets turned on within Oracle UCM. Q: All customers have some interaction with their applications and have many older versions, how do you see some of these new Enterprise 2.0 capabilities adding value to existing enterprise application deployments?A: Just as Service Oriented Architectures allowed for connecting the processes of different applications systems to work together, there's a need for a similar approach with regards to these enterprise 2.0 capabilities. Oracle WebCenter is built on a core architecture that allows for SOA of these Enterprise 2.0 services so that one set of scalable services can be used and integrated directly into any type of application. In this way, users can get immediate value out of the Enterprise 2.0 capabilities without having to wait for the next major release or upgrade. These centrally managed WebCenter services expose a set of standard interfaces that make it extremely easy to add them into existing applications no matter what technology the application has been implemented. Q: We've heard about Oracle Next Generation applications called "Fusion Applications", can you tell me how all this works together?A: Oracle WebCenter powers the core collaboration and social computing services found within Fusion Applications. It is the core user experience technology for how all the application screens have been implemented. And the core concept of task flows allows for all the Fusion Applications modules to be adaptable and composable by business users and IT without needing to be a professional developer. Oracle WebCenter is at the heart of the new Fusion Applications. In addition, the same patterns and technologies are now being added to the existing applications including JD Edwards, Siebel, Peoplesoft, and eBusiness Suite. The core technology enables all these customers to have a much smoother upgrade path to Fusion Applications. They get immediate benefits of injecting new user interactions into their existing applications without having to completely move to Fusion Applications. And then when the time comes, their users will already be well versed in how the new capabilities work. Q: Does any of this work with non Oracle software? Other databases? Other application servers? etc.A: We have made sure that Oracle WebCenter delivers the broadest set of development choices so that no matter what technology you developers are using, WebCenter capabilities can be quickly and easily added to the site or application. In addition, we have certified Oracle WebCenter to run against non-Oracle databases like DB2 and SQLServer. We have stated plans for certification against MySQL as well. Later in CY 2011, Oracle will provide certification on non-Oracle application servers such as WebSphere and JBoss. Q: How do we balance User and IT requirements in regards to Enterprise 2.0 technologies?A: Wrong decisions are often made because employee knowledge is not tapped efficiently and opportunities to innovate are often missed because the right people do not work together. Collaboration amongst workers in the right business context is critical for success. While standalone Enterprise 2.0 technologies can improve collaboration for collaboration's sake, using social collaboration tools in the context of business applications and processes will improve business responsiveness and lead companies to a more competitive position. As these systems become more mission critical it is essential that they maintain the highest level of performance and availability while scaling to support larger communities. Q: What are the ways in which Enterprise 2.0 can improve business responsiveness?A: With a wide range of Enterprise 2.0 tools in the marketplace, CIOs need to deploy solutions that will meet the requirements from users as well as address the requirements from IT. Workers want a next-generation user experience that is personalized and aggregates their daily tools and tasks, while IT needs to ensure the solution is secure, scalable, flexible, reliable and easily integrated with existing systems. An open and integrated approach to deploying portals, content management, and collaboration can enhance your business by addressing both the needs of knowledge workers for better information and the IT mandate to conserve resources by simplifying, consolidating and centralizing infrastructure and administration.  

  Read the article

• Visual Studio &amp; TFS 11 &ndash; List of extensions and upgrades

  - by terje

  This post is a list of the extensions I recommend for use with Visual Studio 11. It’s coming up all the time – what to install, where are the download sites, last version, etc etc, and thus I thought it better to post it here and keep it updated. The basics are Visual Studio 11 connected to a Team Foundation Server 11. Note that we now are at Beta time, and that also many live in a side-by-side environment with Visual Studio 2010.  The side-by-side is supported by VS 11. However, if you installed a component supporting VS11 before you installed VS11, then you need to reinstall it.  The VSIX installer will understand that it is to apply those only for VS11, and will not touch – nor remove – the same for VS2010. A good example here is the Power Commands. The list is more or less in priority order. The focus is to get a setup which can be used for a complete coding experience for the whole ALM process. The list of course reflects what I use for my work , so it is by no means complete, and for some of the tools there are equally useful alternatives. Many components have not yet arrived with VS11 support.  I will add them as they arrive.  The components directly associated with Visual Studio from Microsoft should be common, see the Microsoft column. If you still need the VS2010 extensions, here they are: The extensions for VS 2010.   Components ready for VS 11, both upgrades and new ones Product Notes Latest Version License Applicable to Microsoft TFS Power Tools Beta 111 Side-by-side with TFS 2010 should work, but remove the Shell Extension from the TFS 2010 power tool first. March 2012(11.0.50321.0) Free TFS integration Yes ReSharper EAP for Beta 11 (updates very often, nearly daily) 7.0.3.261 pr. 16/3/2012 Free as EAP, Licensed later Coding & Quality No Power Commands1 Just reinstall, even if you already have it for VS2010. The reinstall will then apply it to VS 11 1.0.2.3 Free Coding Yes Visualization and Modelling SDK for beta Info here and here. Another download site and info here. Also download from MSDN Subscription site. Requires VS 11 Beta SDK 11 Free now, otherwise Part of MSDN Subscription Modeling Yes Visual Studio 11 Beta SDK Published 16.2.2012     Yes Visual Studio 11 Feedback tool1 Use this to really ease the process of sending bugs back to Microsoft. 1.1 Free as prerelase Visual Studio Yes             #1 Get via Visual Studio’s Tools | Extension Manager (or The Code Gallery). (From Adam : All these are auto updated by the Extension Manager in Visual Studio) #2 Works with ultimate only Components we wait for, not yet in a VS 11 version Product Notes Latest Version License Applicable to Microsoft       Coding Yes Inmeta Build Explorer     Free TFS integration No Build Manager Community Build Manager. Info here from Jakob   Free TFS Integration No Code Contracts Coming real soon   Free Coding & Quality Yes Code Contracts Editor Extensions     Free Coding & Quality Yes Web Std Update     Free Coding (Web) Yes (MSFT) Web Essentials     Free Coding (Web) Yes (MSFT) DotPeek It says up to .Net 4.0, but some tests indicates it seems to be able to handle 4.5. 1.0.0.7999 Free Coding/Investigation No Just Decompile Also says up to .net 4.0   Free Coding/Investigation No dotTrace     Licensed Quality No NDepend   Licensed Quality No tangible T4 editor     Lite version Free (Good enough) Coding (T4 templates) No Pex Moles are now integrated and improved in VS 11 as a new library called Fakes.     Coding & Unit Testing Yes Components which are now integrated into VS 11 Product Notes Productivity Power Tools Features integrated into VS11, with a few exceptions, I don’t think you will miss those. Fakes  Was Moles in 2010. Fakes is improved and made into a product.  NuGet Manager Included in the install, but still an extension package. Info here. Product installation, upgrades and patches for VS/TFS 11   Product Notes Date Applicable to Visual Studio 11 & TFS 11 Beta This is the beta release, and you are free to download and try it out. March 2012 Visual Studio and TFS SQL Server 2008 R2 SP1 Cumulative Update 4 The TFS 11 requires the CU1 at least, but you should go up to at least CU4, since this update solves a ghost record problem that otherwise may cause your TFS database to not release records the way it should when you clean it up, see this post for more information on that issue.  Oct 2011 SQL Server 2008 R2 SP1

  Read the article

• MSSQL: Copying data from one database to another

  - by DigiMortal

  I have database that has data imported from another server using import and export wizard of SQL Server Management Studio. There is also empty database with same tables but it also has primary keys, foreign keys and indexes. How to get data from first database to another? Here is the description of my crusade. And believe me – it is not nice one. Bugs in import and export wizard There is some awful bugs in import and export wizard that makes data imports and exports possible only on very limited manner: wizard is not able to analyze foreign keys, wizard wants to create tables always, whatever you say in settings. The result is faulty and useless package. Now let’s go step by step and make things work in our scenario. Database There are two databases. Let’s name them like this: PLAIN – contains data imported from remote server (no indexes, no keys, no nothing, just plain dumb data) CORRECT – empty database with same structure as remote database (indexes, keys and everything else but no data) Our goal is to get data from PLAIN to CORRECT. 1. Create import and export package In this point we will create faulty SSIS package using SQL Server Management Studio. Run import and export wizard and let it create SSIS package that reads data from CORRECT and writes it to, let’s say, CORRECT-2. Make sure you enable identity insert. Make sure there are no views selected. Make sure you don’t let package to create tables (you can miss this step because it wants to create tables anyway). Save package to SSIS. 2. Modify import and export package Now let’s clean up the package and remove all faulty crap. Connect SQL Server Management Studio to SSIS instance. Select the package you just saved and export it to your hard disc. Run Business Intelligence Studio. Create new SSIS project (DON’T MISS THIS STEP). Add package from disc as existing item to project and open it. Move to Control Flow page do one of following: Remove all preparation SQL-tasks and connect Data Flow tasks. Modify all preparation SQL-tasks so the existence of tables is checked before table is created (yes, you have to do it manually). Add new Execute-SQL task as first task in control flow: Open task properties. Assign destination connection as connection to use. Insert the following SQL as command:   EXEC sp_MSForEachTable 'ALTER TABLE ? NOCHECK CONSTRAINT ALL' GO   EXEC sp_MSForEachTable 'DELETE FROM ?' GO   Save task. Add new Execute-SQL task as last task in control flow: Open task properties. Assign destination connection as connection to use. Insert the following SQL as command:   EXEC sp_MSForEachTable 'ALTER TABLE ? CHECK CONSTRAINT ALL' GO   Save task Now connect first Execute-SQL task with first Data Flow task and last Data Flow task with second Execute-SQL task. Now move to Package Explorer tab and change connections under Connection Managers folder. Make source connection to use database PLAIN. Make destination connection to use database CORRECT. Save package and rebuilt the project. Update package using SQL Server Management Studio. Some hints: Make sure you take the package from solution folder because it is saved there now. Don’t overwrite existing package. Use numeric suffix and let Management Studio to create a new version of package. Now you are done with your package. Run it to test it and clean out all the errors you find. TRUNCATE vs DELETE You can see that I used DELETE FROM instead of TRUNCATE. Why? Because TRUNCATE has some nasty limits (taken from MSDN): “You cannot use TRUNCATE TABLE on a table referenced by a FOREIGN KEY constraint; instead, use DELETE statement without a WHERE clause. Because TRUNCATE TABLE is not logged, it cannot activate a trigger. TRUNCATE TABLE may not be used on tables participating in an indexed view.” As I am not sure what tables you have and how they are used I provided here the solution that should work for all scenarios. If you need better performance then in some cases you can use TRUNCATE table instead of DELETE. Conclusion My conclusion is bitter this time although I am very positive guy. It is A.D. 2010 and still we have to write stupid hacks for simple things. Simple tools that existed before are long gone and we have to live mysterious bloatware that is our only choice when using default tools. If you take a look at the length of this posting and the count of steps I had to do for one easy thing you should treat it as a signal that something has went wrong in last years. Although I got my job done I would be still more happy if out of box tools are more intelligent one day. References T-SQL Trick for Deleting All Data in Your Database (Mauro Cardarelli) TRUNCATE TABLE (MSDN Library) Error Handling in SQL 2000 – a Background (Erland Sommarskog) Disable/Enable Foreign Key and Check constraints in SQL Server (Decipher)

  Read the article

• The first day of JavaOne is already over!

  - by delabassee

  In the past Sunday used to be a more relaxing day with ‘just’ some JavaOne activities going on. Sunday used to be a soft day to prepare yourself for an exhausting week. This is now over as JavaOne is expanding; Sunday is now an integral part of the conference. One of the side effect of this extra day is that some activities related to JavaOne and OpenWorld such as MySQL Connect are being push to start a day earlier on Saturday (can you spot the pattern here?). On the GlassFish front, Sunday was a very busy day! It started at the Moscone Center with the annual GlassFish Community Event where the Java EE 7 and GF 4 roadmaps were presented and discussed. During the event, different GlassFish users such as ZeroTurnaround (the JRebel guys), Grupo RBS and IDR Solutions shared their views on GF, why they like GF but also what could be improved. The event was also a forum for the GF community to exchange with some of the key Java EE / GlassFish Oracle Executives and the different GF team members. The Strategy keynote and the Technical keynote were held in the Masonic Auditorium later in the after-noon. Oracle executives have presented the plans for Java SE, Java FX and Java EE. As on-demand replays will be available soon, I will not summarize several hours of content but here are some personal takeaways from those keynotes. Modularity Modularity is a big deal. We know by now that Project Jigsaw will not be ready for Java SE 8 but in any case, it is already possible (and encouraged) to test Jigsaw today. In the future, Java EE plan to rely on the modularity features provided by Java SE, so Project Jigsaw is also relevant for Java EE developers. Shorter term, to cover some of the modular requirements, Java SE will adopt the approach that was used for Java EE 6 and the notion of Profiles. This approach does not define a module system per say; Profiles is a way to clearly define different subsets of Java SE to fulfill different needs (e.g. the full JRE is not required for a headless application). The introduction of different Profiles, from the Base profile (10mb) to the Full Profile (+50mb), has been proposed for Java SE 8. Embedded Embedded is a strong theme going forward for the Java Plaform. There is now a dedicated program : Java Embedded @ JavaOne Java by nature (e.g. platform independence, built-in security, ability easily talks to any back-end systems, large set of skills available on the market, etc.) is probably the most suited platform for the Internet of Things. You can quickly be up-to-speed and develop services and applications for that space just by using your current Java skills. All you need to start developing on ARM is a 35$ Raspberry Pi ARM board (25$ if you are cheap and can live without an ethernet connection) and the recently released JDK for Linux/ARM. Obviously, GlassFish runs on Raspberry Pi. If you wan to go further in the embedded space, you should take a look Java SE Embedded, an optimized, low footprint, Java environment that support the major embedded architectures (ARM, PPC and x86). Finally, Oracle has recently introduced Java Embedded Suite, a new solution that brings modern middleware capabilities to the embedded space. Java Embedded Suite is an optimized solution that leverage Java SE Embedded but also GlassFish, Jersey and JavaDB to deploy advanced value added capabilities (eg. sensor data filtering and) deeper in the network, closer to the devices. JavaFX JavaFX is going strong! Starting from Java SE 7u6, JavaFX is bundled with the JDK. JavaFX is now available for all the major desktop platforms (Windows, Linux and Mac OS X). JavaFX is now also available, in developer preview, for low end device running Linux/ARM. During the keynote, JavaFX was shown running on a Raspberry Pi! And as announced during the keynote, JavaFX should be fully open-sourced by the end of the year; contributions are welcome!. There is a strong momentum around JavaFX, it’s the ideal client solution for the Java platform. A client layer that works perfectly with GlassFish on the back-end. If you were not convince by JavaFX, it’s time to reconsider it! As an old Chinese proverb say “One tweet is worth a thousand words!” HTML5, Project Avatar and Java EE 7 HTML5 got a lot of airtime too, it was covered during the Java EE 7 section of the keynote. Some details about Project Avatar, Oracle’s incubator project for a TSA (Thin Server Architecture) solution, were diluted and shown during the keynote. On the tooling side, Project Easel running on NetBeans 7.3 beta was demo’ed, including a cool NetBeans debugging session running in Chrome! HTML 5, Project Avatar and Java EE 7 deserve separate posts... Feedback We need your feedback! There are many projects, JSRs and products cooking : GlassFish 4, Project Jigsaw, Concurrency Utilities for Java EE (JSR 236), OpenJFX, OpenJDK to name just a few. Those projects, those specifications will have a profound impact on the Java platform for the years to come! So if you have the opportunity, download, install, learn, tests them and give feedback! Remember, you can "Make the Future Java!" Finally, the traditional GlassFish Party at the Thirsty Bear concluded the first JavaOne day. This party is another place where the community can freely exchange with the GlassFish team in a more relaxed, more friendly (but sometime more noisy) atmosphere. Arun has posted a set of pictures to reflect the atmosphere of the keynotes and the GlassFish party. You can find more details on the others Java EE and GlassFish activities here.

  Read the article

• Keep it Professional &ndash; Multiple Environments

  - by AjarnMark

  I have certainly been reading blogs a whole lot more than writing them the last several weeks, and it’s about time I got back to writing.  I have been collecting several topics and references for blog posts…some of which will probably just never get written as the timeliness of the topics fade over time.  Nonetheless, I’m back, and I think it is time to revive my Doing Business Right series, this time coming from the slant of managing a development team rather than the previous angle of being self-employed.  First up: separating Dev, Test, and Prod. A few months ago, Colin Stasiuk (@BenchmarkIT) wrote a great post about separating your Dev, Test/UAT, and Prod environments.  This post covers all the important points such as removing Developer access from both PROD and UAT, and the importance of proper deployment (a.k.a. promotion) procedures.  I won’t repeat it all here, go read the original!  But what I do want to address is what I believe to be the #1 excuse people use for not having separate environments:  Money.  I discussed this briefly in my comment on Colin’s post at the time, but let me repeat it here and expand on it a bit. Don’t let the size of your company or the size of its budget dictate whether you do things professionally or not.  I am convinced that most developers and development teams would agree that it is a best practice to have separate environments for development, testing, and production (a.k.a. Live).  So why don’t they?  Because they think that it means separate servers which means more money.  While having separate physical servers for the different environments would be ideal, it is not an absolute requirement in order to make this work.  Here are a few ideas: Use multiple instances of SQL Server and multiple Web Sites with Headers or Ports.  For no additional fees* you can install multiple instances of SQL Server on the same machine.  This gives you a nice separation, allowing you to even use the same database names as will appear in PROD, yet isolating the data and security access.  And in IIS, you can create multiple Web Sites on the same server just by using Host Headers or different port numbers to separate them.  This approach does still pose the risk of non-Prod environments impacting performance on Prod, but when your application is busy enough for that to be a concern, you can probably afford one of the other options. Use desktop PCs instead of servers.  Instead of investing in full server-grade hardware, you can mimic the separate environments on old desktop PCs and at least get functional equivalency, if not performance matching.  The last I checked, Microsoft did not require separate licensing for SQL Server if that installation was used exclusively for dev or test purposes*.  There may be some version or performance differences between this approach and what you have in Prod, but you have isolated test from impacting Prod resources this way. Virtualization.  This is of course one of the hot topics of the day, and I would be remiss if I did not suggest this.  It is quite easy these days to setup virtual machines so that, again, your environments are fairly isolated from one another, and you retain all the security and procedural benefits of having separate environments. So the point is, keep your high professional standards intact.  You don’t need to compromise on using proper procedure just because you work in a small company with a small budget.  Keep doing things the right way! By the way, where I work, our DEV environment is not on a server.  All development is done on the developer’s individual workstation where it can be isolated from other developers’ work for the duration of writing the code, but also where the developers have to reconcile (merge) differences in code under concurrent development.  This usually means that each change is executed multiple times (once per developer to update their environments with the latest changes from others) giving us an extra, informal. test deployment before even going to the Test/UAT server.  It also means that if the network goes down, the developers can continue to hum along because they are not dependent on networked resources.  In fact, they will likely be even more productive because they aren’t being interrupted by email…but that’s another post I need to write. * I am not a lawyer, nor a licensing specialist, but it appeared to be so the last time I checked.  When in doubt, consult an expert on the topic.

  Read the article

• Java EE at JavaOne - A Few Picks from a Very Rich Line-up

  - by Janice J. Heiss

  A rich and diverse set of sessions cast a spotlight on Java EE at this year’s JavaOne, ranging from the popular Web Framework Smackdown, to Java EE 6 and Spring, to sessions exploring Java EE 7, and one on the implications of HTML5. Some of the world’s best EE architects and developers will be sharing their insight and expertise. If only I could be at ten places at once!BOF4149 - Web Framework Smackdown 2012    Markus Eisele - Principal IT Architect, msg systems ag    Graeme Rocher - Senior Staff Engineer, VMware    James Ward - Developer Evangelist, Heroku    Ed Burns - Consulting Member of Technical Staff, Oracle    Santiago Pericasgeertsen - Software Engineer, Oracle* Monday, Oct 1, 8:30 PM - 9:15 PM - Parc 55 - Cyril Magnin II/III Much has changed since the first Web framework smackdown, at JavaOne 2005. Or has it? The 2012 edition of this popular panel discussion surveys the current landscape of Web UI frameworks for the Java platform. The 2005 edition featured JSF, Webwork, Struts, Tapestry, and Wicket. The 2012 edition features representatives of the current crop of frameworks, with a special emphasis on frameworks that leverage HTML5 and thin-server architecture. Java Champion Markus Eisele leads the lively discussion with panelists James Ward (Play), Graeme Rocher (Grails), Edward Burns (JSF) and Santiago Pericasgeertsen (Avatar).CON6430 - Java EE and Spring Framework Panel Discussion    Richard Hightower - Developer, InfoQ    Bert Ertman - Fellow, Luminis    Gordon Dickens - Technical Architect, IT101, Inc.    Chris Beams - Senior Technical Staff, VMware    Arun Gupta - Technology Evangelist, Oracle* Tuesday, Oct 2, 10:00 AM - 11:00 AM - Parc 55 - Cyril Magnin II/III In the age of Java EE 6 and Spring 3, enterprise Java developers have many architectural choices, including Java EE 6 and Spring, but which one is right for your project? Many of us have heard the debate and seen the flame wars—it’s a topic with passionate community members, and it’s a vibrant debate. If you are looking for some level-headed discussion, grounded in real experience, by developers who have tried both, then come join this discussion. InfoQ’s Java editors moderate the discussion, and they are joined by independent consultants and representatives from both Java EE and VMWare/SpringSource.BOF4213 - Meet the Java EE 7 Specification Leads   Linda Demichiel - Consulting Member of Technical Staff, Oracle   Bill Shannon - Architect, Oracle* Tuesday, Oct 2, 5:30 PM - 6:15 PM – Parc 55 - Cyril Magnin II/III This is your chance to meet face-to-face with the engineers who are developing the next version of the Java EE platform. In this session, the specification leads for the leading technologies that are part of the Java EE 7 platform discuss new and upcoming features and answer your questions. Come prepared with your questions, your feedback, and your suggestions for new features in Java EE 7 and beyond.CON10656 - JavaEE.Next(): Java EE 7, 8, and Beyond    Ian Robinson - IBM Distinguished Engineer, IBM    Mark Little - JBoss CTO, NA    Scott Ferguson - Developer, Caucho Technology    Cameron Purdy - VP Development, Oracle*Wednesday, Oct 3, 4:30 PM - 5:30 PM - Parc 55 - Cyril Magnin II/IIIIn this session, hear from a distinguished panel of industry and open source luminaries regarding where they believe the Java EE community is headed, starting with Java EE 7. The focus of Java EE 7 and 8 is mostly on the cloud, specifically aiming to bring platform as a service (PaaS) providers and application developers together so that portable applications can be deployed on any cloud infrastructure and reap all its benefits in terms of scalability, elasticity, multitenancy, and so on. Most importantly, Java EE will leverage the modularization work in the underlying Java SE platform. Java EE will, of course, also update itself for trends such as HTML5, caching, NoSQL, ployglot programming, map/reduce, JSON, REST, and improvements to existing core APIs.CON7001 - HTML5 WebSocket and Java    Danny Coward - Java, Oracle*Wednesday, Oct 3, 4:30 PM - 5:30 PM - Parc 55 - Cyril Magnin IThe family of HTML5 technologies has pushed the pendulum away from rich client technologies and toward ever-more-capable Web clients running on today’s browsers. In particular, WebSocket brings new opportunities for efficient peer-to-peer communication, providing the basis for a new generation of interactive and “live” Web applications. This session examines the efforts under way to support WebSocket in the Java programming model, from its base-level integration in the Java Servlet and Java EE containers to a new, easy-to-use API and toolset that are destined to become part of the standard Java platform.

  Read the article

• Imaging: Paper Paper Everywhere, but None Should be in Sight

  - by Kellsey Ruppel

  Author: Vikrant Korde, Technical Architect, Aurionpro's Oracle Implementation Services team My wedding photos are stored in several empty shoeboxes. Yes...I got married before digital photography was mainstream...which means I'm old. But my parents are really old. They have shoeboxes filled with vacation photos on slides (I doubt many of you have even seen a home slide projector...and I hope you never do!). Neither me nor my parents should have shoeboxes filled with any form of photographs whatsoever. They should obviously live in the digital world...with no physical versions in sight (other than a few framed on our walls). Businesses grapple with similar challenges. But instead of shoeboxes, they have file cabinets and warehouses jam packed with paper invoices, legal documents, human resource files, material safety data sheets, incident reports, and the list goes on and on. In fact, regulatory and compliance rules govern many industries, requiring that this paperwork is available for any number of years. It's a real challenge...especially trying to find archived documents quickly and many times with no backup. Which brings us to a set of technologies called Image Process Management (or simply Imaging or Image Processing) that are transforming these antiquated, paper-based processes. Oracle's WebCenter Content Imaging solution is a combination of their WebCenter suite, which offers a robust set of content and document management features, and their Business Process Management (BPM) suite, which helps to automate business processes through the definition of workflows and business rules. Overall, the solution provides an enterprise-class platform for end-to-end management of document images within transactional business processes. It's a solution that provides all of the capabilities needed - from document capture and recognition, to imaging and workflow - to effectively transform your ‘shoeboxes’ of files into digitally managed assets that comply with strict industry regulations. The terminology can be quite overwhelming if you're new to the space, so we've provided a summary of the primary components of the solution below, along with a short description of the two paths that can be executed to load images of scanned documents into Oracle's WebCenter suite. WebCenter Imaging (WCI): the electronic document repository that provides security, annotations, and search capabilities, and is the primary user interface for managing work items in the imaging solution SOA & BPM Suites (workflow): provide business process management capabilities, including human tasks, workflow management, service integration, and all other standard SOA features. It's interesting to note that there a number of 'jumpstart' processes available to help accelerate the integration of business applications, such as the accounts payable invoice processing solution for E-Business Suite that facilitates the processing of large volumes of invoices WebCenter Enterprise Capture (WEC): expedites the capture process of paper documents to digital images, offering high volume scanning and importing from email, and allows for flexible indexing options WebCenter Forms Recognition (WFR): automatically recognizes, categorizes, and extracts information from paper documents with greatly reduced human intervention WebCenter Content: the backend content server that provides versioning, security, and content storage There are two paths that can be executed to send data from WebCenter Capture to WebCenter Imaging, both of which are described below: 1. Direct Flow - This is the simplest and quickest way to push an image scanned from WebCenter Enterprise Capture (WEC) to WebCenter Imaging (WCI), using the bare minimum metadata. The WEC activities are defined below: The paper document is scanned (or imported from email). The scanned image is indexed using a predefined indexing profile. The image is committed directly into the process flow 2. WFR (WebCenter Forms Recognition) Flow - This is the more complex process, during which data is extracted from the image using a series of operations including Optical Character Recognition (OCR), Classification, Extraction, and Export. This process creates three files (Tiff, XML, and TXT), which are fed to the WCI Input Agent (the high speed import/filing module). The WCI Input Agent directory is a standard ingestion method for adding content to WebCenter Imaging, the process for doing so is described below: WEC commits the batch using the respective commit profile. A TIFF file is created, passing data through the file name by including values separated by "_" (underscores). WFR completes OCR, classification, extraction, export, and pulls the data from the image. In addition to the TIFF file, which contains the document image, an XML file containing the extracted data, and a TXT file containing the metadata that will be filled in WCI, are also created. All three files are exported to WCI's Input agent directory. Based on previously defined "input masks", the WCI Input Agent will pick up the seeding file (often the TXT file). Finally, the TIFF file is pushed in UCM and a unique web-viewable URL is created. Based on the mapping data read from the TXT file, a new record is created in the WCI application.  Although these processes may seem complex, each Oracle component works seamlessly together to achieve a high performing and scalable platform. The solution has been field tested at some of the largest enterprises in the world and has transformed millions and millions of paper-based documents to more easily manageable digital assets. For more information on how an Imaging solution can help your business, please contact [email protected] (for U.S. West inquiries) or [email protected] (for U.S. East inquiries). About the Author: Vikrant is a Technical Architect in Aurionpro's Oracle Implementation Services team, where he delivers WebCenter-based Content and Imaging solutions to Fortune 1000 clients. With more than twelve years of experience designing, developing, and implementing Java-based software solutions, Vikrant was one of the founding members of Aurionpro's WebCenter-based offshore delivery team. He can be reached at [email protected].

  Read the article

• Video games, content strategy, and failure - oh my.

  - by Roger Hart

  Last night was the CS London group's event Content Strategy, Manhattan Style. Yes, it's a terrible title, feeling like a self-conscious grasp for chic, sadly commensurate with the venue. Fortunately, this was not commensurate with the event itself, which was lively, relevant, and engaging. Although mostly if you're a consultant. This is a strong strain in current content strategy discourse, and I think we're going to see it remedied quite soon. Not least in Paris on Friday. A lot of the bloggers, speakers, and commentators in the sphere are consultants, or part of agencies and other consulting organisations. A lot of the talk is about how you sell content strategy to your clients. This is completely acceptable. Of course it is. And it's actually useful if that's something you regularly have to do. To an extent, it's even portable to those of us who have to sell content strategy within an organisation. We're still competing for credibility and resource. What we're doing less is living in the beginning of a project. This was touched on by Jeffrey MacIntyre (albeit in a your-clients kind of a way) who described "the day two problem". Companies, he suggested, build websites for launch day, and forget about the need for them to be ongoing entities. Consultants, agencies, or even internal folks on short projects will live through Day Two quite often: the trainwreck moment where somebody realises that even if the content is right (which it often isn't), and on time (which it often isn't), it'll be redundant, outdated, or inaccurate by the end of the week/month/fickle social media attention cycle. The thing about living through a lot of Day Two is that you see a lot of failure. Nothing succeeds like failure? Failure is good. When it's structured right, it's an awesome tool for learning - that's kind of how video games work. I'm chewing over a whole blog post about this, but basically in game-like learning, you try, fail, go round the loop again. Success eventually yields joy. It's a relatively well-known phenomenon. It works best when that failing step is acutely felt, but extremely inexpensive. Dying in Portal is highly frustrating and surprisingly characterful, but the save-points are well designed and the reload unintrusive. The barrier to re-entry into the loop is very low, as is the cost of your failure out in meatspace. So it's easy (and fun) to learn. Yeah, spot the difference with business failure. As an external content strategist, you get to rock up with a big old folder full of other companies' Day Two (and ongoing day two hundred) failures. You can't send the client round the learning loop - although you may well be there because they've been round it once - but you can show other people's round trip. It's not as compelling, but it's not bad. What about internal content strategists? We can still point to things that are wrong, and there are some very compelling tools at our disposal - content inventories, user testing, and analytics, for instance. But if we're picking up big organically sprawling legacy content, Day Two may well be a distant memory, and the felt experience of web content failure is unlikely to be immediate to many people in the organisation. What to do? My hunch here is that the first task is to create something immediate and felt, but that it probably needs to be a success. Something quickly doable and visible - a content problem solved with a measurable business result. Now, that's a tall order; but scrape of the "quickly" and it's the whole reason we're here. At Red Gate, I've started with the text book fear and passion introduction to content strategy. In fact, I just typo'd that as "contempt strategy", and it isn't a bad description. Yelling "look at this, our website is rubbish!" gets you the initial attention, but it doesn't make you many friends. And if you don't produce something pretty sharp-ish, it's easy to lose the momentum you built up for change. The first thing I've done - after the visual content inventory - is to delete a bunch of stuff. About 70% of the SQL Compare web content has gone, in fact. This is a really, really cheap operation. It's visible, and it's powerful. It's cheap because you don't have to create any new content. It's not free, however, because you do have to validate your deletions. This means analytics, actually reading that content, and talking to people whose business purposes that content has to serve. If nobody outside the company uses it, and nobody inside the company thinks they ought to, that's a no-brainer for the delete list. The payoff here is twofold. There's the nebulous hard-to-illustrate "bad content does user experience and brand damage" argument; and there's the "nobody has to spend time (money) maintaining this now" argument. One or both are easily felt, and the second at least should be measurable. But that's just one approach, and I'd be interested to hear from any other internal content strategy folks about how they get buy-in, maintain momentum, and generally get things done.

  Read the article

• Productivity vs Security [closed]

  - by nerijus

  Really do not know is this right place to ask such a questions. But it is about programming in a different light. So, currently contracting with company witch pretends to be big corporation. Everyone is so important that all small issues like developers are ignored. Give you a sample: company VPN is configured so that if you have VPN then HTTP traffic is banned. Bearing this in mind can you imagine my workflow: Morning. Ok time to get latest source. Ups, no VPN. Let’s connect. Click-click. 3 sec. wait time. Ok getting source. Do I have emails? Ups. VPN is on, can’t check my emails. Need to wait for source to come up. Finally here it is! Ok Click-click VPN is gone. What is in my email. Someone reported a bug. Good, let’s track it down. It is in TFS already. Oh, dam, I need VPN. Click-click. Ok, there is description. Yea, I have seen this issue in stachoverflow.com. Let’s go there. Ups, no internet. Click-click. No internet. What? IPconfig… DHCP server kicked me out. Dam. Renew ip. 1..2..3. Ok internet is back. Google: site: stachoverflow.com 3 min. I have solution. Great I love stackoverflow.com. Don’t want to remember days where there was no stackoveflow.com. Ok. Copy paste this like to studio. Dam, studio is stalled, can’t reach files on TFS. Click-click. VPN is back. Get source out, paste my code. Grand. Let’s see what other comments about an issue in stackoverflow.com tells. Hmm.. There is a link. Click. Dammit! No internet. Click-click. No internet. DHCP kicked me out. Dammit. Now it is even worse: this happens 3-4 times a day. After certain amount of VPN connections open\closed my internet goes down solid. Only way to get internet back is reboot. All my browser tabs/SQL windows/studio will be gone. This happened just now when I am typing this. Back to issue I am solving right now: I am getting frustrated - I do not care about better solution for this issue. Let’s do it somehow and forget. This Click-click barrier between internet and TFS kills me… Sounds familiar? You could say there are VPN settings to change. No! This is company laptop, not allowed to do changes. I am very very lucky to have admin privileges on my machine. Most of developers don’t. So just learned to live with this frustration. It takes away 40-60 minutes daily. Tried to email company support, admins. They are too important ant too busy with something that just ignored my little man’s problem. Politely ignored. Question is: Is this normal in corporate world? (Have been in States, Canada, Germany. Never seen this.)

  Read the article

• The standards that fail us and the intellectual bubble

  - by Jeff

  There has been a great deal of noise in the techie community about standards, and a sudden and unexplainable hate for Flash. This noise isn't coming from consumers... the countless soccer moms, teens and your weird uncle Bob, it's coming from the people who build (or at least claim to build) the stuff those consumers consume. If you could survey the position of consumers on the topic, they'd likely tell you that they just want stuff on the Web to work.The noise goes something like this: Web standards are the correct and right thing to use across the Intertubes, and anything not a part of those standards (Flash) is bad. Furthermore, the more recent noise is centered around the idea that HTML 5, along with Javascript, is the right thing to use. The arguments against Flash are, well, the truth is I haven't seen a good argument. I see anecdotal nonsense about high CPU usage and things I'd never think to check when I'm watching Piano Cat on YouTube, but these aren't arguments to me. Sure, I've seen it crash a browser a few times, but it's totally rare.But let's go back to standards. Yes, standards have played an important role in establishing the ubiquity of the Web. The protocols themselves, TCP/IP and HTTP, have been critical. HTML, which has served us well for a very long time, established an incredible foundation. Javascript did an OK job, and thanks to clever programmers writing great frameworks like JQuery, is becoming more and more useful. CSS is awful (there, I said it, I feel SO much better), and I'll never understand why it's so disconnected and different from anything else. It doesn't help that it's so widely misinterpreted by different browsers. Still, there's no question that standards are a good thing, and they've been good for the Web, consumers and publishers alike.HTML 4 has been with us for more than a decade. In Web years, that might as well be 80. HTML 5, contrary to popular belief, is not a standard, and likely won't be for many years to come. In fact, the Web hasn't really evolved at all in terms of its standards. The tools that generate the standard markup and script have, but at the end of the day, we're still living with standards that are more than ten years old. The "official" standards process has failed us.The Web evolved anyway, and did not wait for standards bodies to decide what to do next. It evolved in part because Macromedia, then Adobe, kept evolving Flash. In the earlier days, it mostly just did obnoxious splash pages, but then it started doing animation, and then rich apps as they added form input. Eventually it found its killer app: video. Now more than 95% of browsers have Flash installed. Consumers are better for it.But I'll do it one better... I'll go out on a limb and say that Flash is a standard. If it's that pervasive, I don't care what you tell me, it's a standard. Just because a company owns it doesn't mean that it's evil or not a standard. And hey, it pains me to say that as a developer, because I think the dev tools are the suck (more on that in a minute). But again, consumers don't care. They don't even pay for Flash. The bottom line is that if I put something Flash based on the Internet, it's likely that my audience will see it.And what about the speed of standards owned by a company? Look no further than Silverlight. Silverlight 2 (which I consider the "real" start to the story) came out about a year and a half ago. Now version 4 is out, and it has come a very long way in its capabilities. If you believe Riastats.com, more than half of browsers have it now. It didn't have to wait for standards bodies and nerds drafting documents, it's out today. At this rate, Silverlight will be on version 6 or 7 by the time HTML 5 is a ratified standard.Back to the noise, one of the things that has continually disappointed me about this profession is the number of people who get stuck in an intellectual bubble, color it with dogmatic principles, and completely ignore the actual marketplace where this stuff all has to live. We aren't machines; Binary thinking that forces us to choose between "open standards" and "proprietary lock-in" (the most loaded b.s. FUD term evar) isn't smart at all. The truth is that the <object> tag has allowed us to build incredible stuff on top of the old standards, and consumers have benefitted greatly. Consumer desire, capitalism, and yes, standards ratified by nerds who think about this stuff for years have all played a role in the broad adoption of the Interwebs.We could all do without the noise. At the end of the day, I'm going to build stuff for the Web that's good for my users, and I'm not going to base my decisions on a techie bubble religion. Imagine what the brilliant minds behind the noise could do for the Web if they joined me in that pursuit.

  Read the article

• OpenSSL Versions in Solaris

  - by darrenm

  Those of you have have installed Solaris 11 or have read some of the blogs by my colleagues will have noticed Solaris 11 includes OpenSSL 1.0.0, this is a different version to what we have in Solaris 10.  I hope the following explains why that is and how it fits with the expectations on binary compatibility between Solaris releases. Solaris 10 was the first release where we included OpenSSL libraries and headers (part of it was actually statically linked into the SSH client/server in Solaris 9).  At time we were building and releasing Solaris 10 the current train of OpenSSL was 0.9.7.  The OpenSSL libraries at that time were known to not always be completely API and ABI (binary) compatible between releases (some times even in the lettered patch releases) though mostly if you stuck with the documented high level APIs you would be fine.   For this reason OpenSSL was classified as a 'Volatile' interface and in Solaris 10 Volatile interfaces were not part of the default library search path which is why the OpenSSL libraries live in /usr/sfw/lib on Solaris 10.  Okay, but what does Volatile mean ? Quoting from the attributes(5) man page description of Volatile (which was called External in older taxonomy): Volatile interfaces can change at any time and for any reason. The Volatile interface stability level allows Sun pro- ducts to quickly track a fluid, rapidly evolving specif- ication. In many cases, this is preferred to providing additional stability to the interface, as it may better meet the expectations of the consumer. The most common application of this taxonomy level is to interfaces that are controlled by a body other than Sun, but unlike specifications controlled by standards bodies or Free or Open Source Software (FOSS) communities which value interface compatibility, it can not be asserted that an incompatible change to the interface specifica- tion would be exceedingly rare. It may also be applied to FOSS controlled software where it is deemed more important to track the community with minimal latency than to provide stability to our customers. It also common to apply the Volatile classification level to interfaces in the process of being defined by trusted or widely accepted organization. These are generically referred to as draft standards. An "IETF Internet draft" is a well understood example of a specification under development. Volatile can also be applied to experimental interfaces. No assertion is made regarding either source or binary compatibility of Volatile interfaces between any two releases, including patches. Applications containing these interfaces might fail to function properly in any future release. Note that last paragraph!  OpenSSL is only one example of the many interfaces in Solaris that are classified as Volatile.  At the other end of the scale we have Committed (Stable in Solaris 10 terminology) interfaces, these include things like the POSIX APIs or Solaris specific APIs that we have no intention of changing in an incompatible way.  There are also Private interfaces and things we declare as Not-an-Interface (eg command output not intended for scripting against only to be read by humans). Even if we had declared OpenSSL as a Committed/Stable interface in Solaris 10 there are allowed exceptions, again quoting from attributes(5): 4. An interface specification which isn't controlled by Sun has been changed incompatibly and the vast majority of interface consumers expect the newer interface. 5. Not making the incompatible change would be incomprehensible to our customers. In our opinion and that of our large and small customers keeping up with the OpenSSL community is important, and certainly both of the above cases apply. Our policy for dealing with OpenSSL on Solaris 10 was to stay at 0.9.7 and add fixes for security vulnerabilities (the version string includes the CVE numbers of fixed vulnerabilities relevant to that release train).  The last release of OpenSSL 0.9.7 delivered by the upstream community was more than 4 years ago in Feb 2007. Now lets roll forward to just before the release of Solaris 11 Express in 2010. By that point in time the current OpenSSL release was 0.9.8 with the 1.0.0 release known to be coming soon.  Two significant changes to OpenSSL were made between Solaris 10 and Solaris 11 Express.  First in Solaris 11 Express (and Solaris 11) we removed the requirement that Volatile libraries be placed in /usr/sfw/lib, that means OpenSSL is now in /usr/lib, secondly we upgraded it to the then current version stream of OpenSSL (0.9.8) as was expected by our customers. In between Solaris 11 Express in 2010 and the release of Solaris 11 in 2011 the OpenSSL community released version 1.0.0.  This was a huge milestone for a long standing and highly respected open source project.  It would have been highly negligent of Solaris not to include OpenSSL 1.0.0e in the Solaris 11 release. It is the latest best supported and best performing version.     In fact Solaris 11 isn't 'just' OpenSSL 1.0.0 but we have added our SPARC T4 engine and the AES-NI engine to support the on chip crypto acceleration. This gives us 4.3x better AES performance than OpenSSL 0.9.8 running on AIX on an IBM POWER7. We are now working with the OpenSSL community to determine how best to integrate the SPARC T4 changes into the mainline OpenSSL.  The OpenSSL 'pkcs11' engine we delivered in Solaris 10 to support the CA-6000 card and the SPARC T1/T2/T3 hardware is still included in Solaris 11. When OpenSSL 1.0.1 and 1.1.0 come out we will asses what is best for Solaris customers. It might be upgrade or it might be parallel delivery of more than one version stream.  At this time Solaris 11 still classifies OpenSSL as a Volatile interface, it is our hope that we will be able at some point in a future release to give it a higher interface stability level. Happy crypting! and thank-you OpenSSL community for all the work you have done that helps Solaris.

  Read the article

• How to Never Use iTunes With Your iPhone, iPad, or iPod Touch

  - by Chris Hoffman

  iTunes isn’t an amazing program on Windows. There was a time when Apple device users had to plug their devices into their PCs or Macs and use iTunes for device activation, updates, and syncing, but iTunes is no longer necessary. Apple still allows you to use iTunes for these things, but you don’t have to. Your iOS device can function independently from iTunes, so you should never be forced to plug it into a PC or Mac. Device Activation When the iPad first came out, it was touted as a device that could replace full PCs and Macs for people who only needed to perform light computing tasks. Yet, to set up a new iPad, users had to plug it into a PC or Mac running iTunes and use iTunes to activate the device. This is no longer necessary. With new iPads, iPhones, and iPod Touches, you can simply go through the setup process after turning on your new device without ever having to plug it into iTunes. Just connect to a Wi-Fi or cellular data network and log in with your Apple ID when prompted. You’ll still see an option that allows you to activate the device via iTunes, but this should only be necessary if you don’t have a wireless Internet connection available for your device. Operating System Updates You no longer have to use Apple’s iTunes software to update to a new version of Apple’s iOS operating system, either. Just open the Settings app on your device, select the General category, and tap Software Update. You’ll be able to update right from your device without ever opening iTunes. Purchased iTunes Media Apple allows you to easily access content you’ve purchased from the iTunes Store on any device. You don’t have to connect your device to your computer and sync via iTunes. For example, you can purchase a movie from the iTunes Store. Then, without any syncing, you can open the iTunes Store app on any of your iOS devices, tap the Purchased section, and see stuff you’ve downloaded. You can download the content right from the store to your device. This also works for apps — apps you purchase from the App Store can be accessed in the Purchased section on the App Store on your device later. You don’t have to sync apps from iTunes to your device, although iTunes still allows you to. You can even set up automatic downloads from the iTunes & App Store settings screen. This would allow you to purchase content on one device and have it automatically download to your other devices without any hassle. Music Apple allows you to re-download purchased music from the iTunes Store in the same way. However, there’s a good chance you have your own music you didn’t purchase from iTunes. Maybe you spent time ripping it all from your old CDs and you’ve been syncing it to your devices via iTunes ever since. Apple’s solution for this is named iTunes Match. This feature isn’t free, but it’s not a bad deal at all. For $25 per year, Apple allows you to upload all your music to your iCloud account. You can then access all your music from any iPhone, IPad, or iPod Touch. You can stream all your music — perfect if you have a huge library and little storage on your device — and choose which songs you want to download to your device for offline use. When you add additional music to your computer, iTunes will notice it and upload it using iTunes Match, making it available for streaming and downloading directly from your iOS devices without any syncing. This feature is named iTunes Match because it doesn’t just upload music — if Apple already has a song you upload, it will “match” your song with Apple’s copy. This means you may get higher-quality versions of your songs if you ripped them from CD at a lower bitrate. Podcasts You don’t have to use iTunes to subscribe to podcasts and sync them to your devices. Even if you have a lowly iPod Touch, you can install APple’s Podcasts app from the app store. Use it to subscribe to podcasts and configure them to automatically download directly to your device. You can use other podcast apps for this, too. Backups You can continue backing up your device’s data through iTunes, generating local backups that are stored on your computer. However, new iOS devices are configured to automatically back up their data to iCloud. This happens automatically in the background without you even having to think about it, and you can restore such backups when setting up a device simply by logging in with your Apple ID. Personal Data In the days of PalmPilots, people would use desktop programs like iTunes to sync their email, contacts, and calendar events with their mobile devices. You probably shouldn’t have to sync this data form your computer. Just sign into your email account — for example, a Gmail account — on your device and iOS will automatically pull your email, contacts, and calendar events from your associated account. Photos Rather than connecting your iOS device to your computer and syncing photos from it, you can use an app that automatically uploads your photos to a web service. Dropbox, Google+, and even Flickr all have this feature in their apps. You’ll be able to access your photos from any computer and have a backup copy without any syncing required. You may still need to use iTunes if you want to sync local music without paying for iTunes Match or copy local video files to your device. Copying large local files over is the only real scenario where you’d need iTunes. If you don’t need to copy such files over, you can go ahead and uninstall iTunes from your Windows PC if you like. You shouldn’t need it.     

  Read the article

• Is it Hard to Write a Blog?

  - by Joe Mayo

  Responding to a tweet I received, asking if I found it hard to write a blog and keep it interesting. This is one of the situations where a 140 character response doesn’t do a question justice. There’s a lot to think about between the subjects of writing, subject matter, and entertainment.  Here’s my take on each of these three topics: There’s all types of writing you can do with various degrees of difficulty. If you’re writing a book and you have a gazillion editors bleeding over your every utterance, then the task becomes harder because you’re second-guessing yourself, not knowing whose opinion will be violated. However, if you’re communicating in a public forum, not too many people care about the grammar as much as whether what you have to say is correct.  For a blog, I would say it’s somewhere in-between.  Right now, I’m using Windows Live Writer, which gives me a few advantages to just typing into the blog editor, such as spelling correction and the ability to save my work and resume later.  Overall, writing is one of those things that you just need to get used to.  It’s an essential skill for developers because you need to document your work, depending on what your definition of proper documentation is, and communicate with other developers via various communications mediums. Not begin good (or not thinking that you’re good) shouldn’t hold you back.  Like most things in life, practice will improve your skill.  So, push away that inner voice that keeps you from moving forward and just do it. A good grasp on the subject matter you’re writing about helps.  However, don’t let a lack of knowledge stop you from writing about something. I recall reading something a while back by a developer who didn’t know a technology but wrote about their experience in learning it. They ended up learning more by expressing their thoughts in writing. If you look around out many blogs today, there are many items written by developers learning what they’re writing about.  So, whether you are sure or unsure, you can still write – just be honest with yourself and your readers about what you’re writing. Also, don’t be afraid to have a different opinion or worry if someone will disagree.  I’ll freely admit that it took a while for me to become accustomed to being criticized. Take the good with the bad and use the bad to make yourself better. Guaranteed, someone will disagree with one or more parts of what I’ve written here or think they have a better approach. No problem, more power to them, and whatever constructive comments they have will be a benefit to me in the future; Otherwise, to h*ll with them. :)  Every time you get knocked down, get right back up, dust the dirt off your backside, and keep moving forward.  You’ll learn in time how to align a subject with your own presentation of the material. Entertainment could be hard or could be natural, depending on the personality of yourself and your target audience. It’s even more challenging because you can say something you think is funny and someone will be offended. In fact, there are a lot of things that you shouldn’t say in the name of a joke, but I won’t mention any of them here for want of not offending anyone. Of course, I probably offended someone by saying that and there is probably an organization somewhere in the world out to get me now. I’m probably not the best person to be giving you advice on entertaining an audience.  I mean, every time I try to tell a joke on Twitter 10 people unfriend me. Okay, maybe 15, but you get my point. One thing you might be interested in knowing is that it’s not too hard for one technical person to entertain other technical people, especially when the subject is of interest.  It’s the excitement in each sentence and passion in each paragraph that will keep another developer entertained and interested in what you have to say. Not everyone will like what you’ve written, but the important part is to find your own voice and it’s likely that there is one person in some corner of the world that likes what you have to say, even if it’s your mom and she doesn’t understand a single word you write. :)   If I could leave you with one final thought; Just do it and don’t let anyone or anything hold you back.   Joe

  Read the article

• H1 Visa interview tips–What you must know before attending the interview?

  - by Gopinath

  USA’s H1 visa allows highly qualified professionals from other countries to work in America. Many IT professionals in India aspire to go to USA on H1 and work for their clients. Recently I had a chance to study H1 visa process to help one of my friends and I would like to share what I learned. With the assumption that your H1 petition is approved and you got an interview scheduled at US Embassy for your visa stamping, here are tips you must know before attending the interview Dress Code – Formals Say no to casuals or any fancy dress when you attend the interview. It’s not a party or friends home you are visiting. Consider H1 Visa interview as your job interview and dress up in formals. There is no option B for your, you must be in formals. A plain formal shirt with a matching pant is suggested for men. Tie and Suit would not be required, but if you are a professional at management level you can consider wearing suit. Women can wear either formal Salwar or formal pant-shirt. Avoid heavy jewellery, wear what is must as per your tradition or culture. Body Language -  Smile on your face Your body language reflects what you are and what’s going on in your mind. Don’t be nervous or restless, be relaxed and wear a beautiful smile on your face. A smile is a curve that sets everything straight. When you are called for the interview, greet the interviewer with a beautiful smile. Say Good Morning/Afternoon/Evening depending on time you are visiting them. Whenever appropriate say Thank You. Generally American professionals are very friendly people and they reciprocate for your greetings. Make sure that you make them comfortable to start the interview. Carry original documents in a separate folder I don’t want to talk much about the documents that are required for your H1B interview as it’s big subject on it’s own and it requires a separate post. I assume that your consultant or employer helped you in gathering all the required documents like – petition, DS 160 forms, education & job related documents, resume, interview call letters, client letters, etc. For all the documents you are going to submit at the interview make sure that you have originals in a separate folder.  If required interviewer may ask you show the originals of any of the document you submitted for visa processing. Don’t mix the original documents with the documents you need to submit for interview. Have a separate folder for them. For those who are going to stamping along with their spouse and children, they need to carry few extra original documents like – marriage certificate, marriage photos(30 numbers)/album, birth certificates, passports, education and profession related certificates of the spouse and children. Know your role & responsibilities The interviewer will ask you questions on your roles and responsibilities at client location. Be clear what is your day to day tasks at client place and prepared to face detailed questions on the same. When asked explain clearly and also make sure what you say is inline with what is mentioned in your petition and client invitation letter. At times they may ask you questions specific to the project/technology you are going to work. So doing some homework in this area will help you easily answer the questions. Failing to answer basic questions on your role & responsibilities may result in rejection. You work for your Employer at Client location but NOT FOR CLIENT One of the important things to keep in mind that you work for your employer and you are being deputed to client location on a work visa.  Your employer is going to be solely responsible for your salary, work, promotion, pay hikes or what so ever during your stay at USA. Your client will not be responsible for anything. Lets say you are employed with Company X in India and they are applying for H1B to work at your client(ex: Microsoft) in USA, you must keep in my mind that Microsoft is not your employer. Microsoft will not pay your salaries or responsible for any employment related activities. Company X will be solely responsible for all your employer related activities. If you don’t get this correctly and say to Visa interviewer that your client is responsible, then you may get into troubles. Know your client It’s always good to know the clients with whom you are going to work in USA and their business. If your client is a well know organisation then you may not get many questions from interviewer else you need to be well prepared to provide details like – nature of business, location, size of the organisation, etc.  Get to know the basic details about your client and be confident while providing those details to the interviewer. Also make sure that you never talk about any confidential details of your client projects and business. Revealing confidential details of your client may land your job itself in soup. Make sure that your spouse is also in sync with you If you’ve applied a H4 visa for your spouse along with your H1, make sure that spouse is in sync with you. Your spouse also should know the basic details of your job, your employer, client and location where you will be travelling. Your spouse should also be prepared to answers questions related to marriage, their profession(if working), kids, education, etc. Interviewers will try to asses your spouse communication skills, whereabouts while staying in USA and would they prefer to work USA or not. On H4, which is a dependent visa, your spouse is not allowed to work in USA and at any point your spouse should not show the intentions to search for work in USA. Less luggage more comfort You would have definitely heard that there are lot of restrictions on what you can carry along with you to an US Embassy while attending the interview. To be frank it’s not good to say there are many restrictions, but there are a hell a lot of restrictions. There are unbelievable restrictions and it’s for the safety of everyone. You are not allowed to carry mobile phones, CD/DVDs, USBs, bank cards, cameras, cosmetics, food(except baby food), water, wallets, backpacks, sealed covers, etc. Trust me most of the things we carry with us regularly every day are not allowed inside. As there are 100s of restrictions, it would be easier if you understand what you can carry along with you and just carry them alone. Ask your employer/consultant to provide you a checklist of items that you can carry. Most what you would require are H1B related documents provided by the employer/consultant Photographs All original documents supporting your H1B Passports Some cash for your travel expenses (avoid coins) Any important phone number / details written in a paper(like your cab driver number, etc.) If you carry restricted stuff then you will be stopped at security checks, you have to find people who can safely keep all the restricted items. Due to heavy restrictions in and around the US Embassy you will not find any  place to keep your luggage. So just carry the bare minimum things required so that you feel more comfortable. Useful Links THE U.S. NON IMMIGRANT VISA APPLICATION PROCESS U.S VISA SECURITY REGULATIONS GENERAL FAQS Hope this information is helpful to you and best of luck for your interview. Creative commons Image credit: Flickr/ alexfrance, vinothchandar. hughelectronic, architratan, striatic

  Read the article

• Database-as-a-Service on Exadata Cloud

  - by Gagan Chawla

  Note – Oracle Enterprise Manager 12c DBaaS is platform agnostic and is designed to work on Exadata/non-Exadata, physical/virtual, Oracle/non Oracle platforms and it’s not a mandatory requirement to use Exadata as the base platform. Database-as-a-Service (DBaaS) is an important trend these days and the top business drivers motivating customers towards private database cloud model include constant pressure to reduce IT Costs and Complexity, and also to be able to improve Agility and Quality of Service. The first step many enterprises take in their journey towards cloud computing is to move to a consolidated and standardized environment and Exadata being already a proven best-in-class popular consolidation platform, we are seeing now more and more customers starting to evolve from Exadata based platform into an agile self service driven private database cloud using Oracle Enterprise Manager 12c. Together Exadata Database Machine and Enterprise Manager 12c provides industry’s most comprehensive and integrated solution to transform from a typical silo’ed environment into enterprise class database cloud with self service, rapid elasticity and pay-per-use capabilities.   In today’s post, I’ll list down the important steps to enable DBaaS on Exadata using Enterprise Manager 12c. These steps are chalked down based on a recent DBaaS implementation from a real customer engagement - Project Planning - First step involves defining the scope of implementation, mapping functional requirements and objectives to use cases, defining high availability, network, security requirements, and delivering the project plan. In a Cloud project you plan around technology, business and processes all together so ensure you engage your actual end users and stakeholders early on in the project right from the scoping and planning stage. Setup your EM 12c Cloud Control Site – Once the project plan approval and sign off from stakeholders is achieved, refer to EM 12c Install guide and these are some important tips to follow during the site setup phase - Review the new EM 12c Sizing paper before you get started with install Cloud, Chargeback and Trending, Exadata plug ins should be selected to deploy during install Refer to EM 12c Administrator’s guide for High Availability, Security, Network/Firewall best practices and options Your management and managed infrastructure should not be combined i.e. EM 12c repository should not be hosted on same Exadata where target Database Cloud is to be setup Setup Roles and Users – Cloud Administrator (EM_CLOUD_ADMINISTRATOR), Self Service Administrator (EM_SSA_ADMINISTRATOR), Self Service User (EM_SSA_USER) are the important roles required for cloud lifecycle management. Roles and users are managed by Super Administrator via Setup menu –> Security option. For Self Service/SSA users custom role(s) based on EM_SSA_USER should be created and EM_USER, PUBLIC roles should be revoked during SSA user account creation. Configure Software Library – Cloud Administrator logs in and in this step configures software library via Enterprise menu –> provisioning and patching option and the storage location is OMS shared filesystem. Software Library is the centralized repository that stores all software entities and is often termed as ‘local store’. Setup Self Update – Self Update is one of the most innovative and cool new features in EM 12c framework. Self update can be accessed via Setup -> Extensibility option by Super Administrator and is the unified delivery mechanism to get all new and updated entities (Agent software, plug ins, connectors, gold images, provisioning bundles etc) in EM 12c. Deploy Agents on all Compute nodes, and discover Exadata targets – Refer to Exadata discovery cookbook for detailed walkthrough to ensure successful discovery of Exadata targets. Configure Privilege Delegation Settings – This step involves deployment of privilege setting template on all the nodes by Super Administrator via Setup menu -> Security option with the option to define whether to use sudo or powerbroker for all provisioning and patching operations. Provision Grid Infrastructure with RAC Database on Compute Nodes – Software is provisioned in this step via a provisioning profile using EM 12c database provisioning. In case of Exadata, Grid Infrastructure and RAC Database software is already deployed on compute nodes via OneCommand from Oracle, so SSA Administrator just needs to discover Oracle Homes and Listener as EM targets. Databases will be created as and when users request for databases from cloud. Customize Create Database Deployment Procedure – the actual database creation steps are "templatized" in this step by Self Service Administrator and the newly saved deployment procedure will be used during service template creation in next step. This is an important step and make sure you have locked all the required variables marked as locked as ‘Y’ in this table. Setup Self Service Portal – This step involves setting up of zones, user quotas, service templates, chargeback plan. The SSA portal is setup by Self Service Administrator via Setup menu -> Cloud -> Database option and following guided workflow. Refer to DBaaS cookbook for details. You also have an option to customize SSA login page via steps documented in EM 12c Cloud Administrator’s guide Final Checks – Define and document process guidelines for SSA users and administrators. Get your SSA users trained on Self Service Portal features and overall DBaaS model and SSA administrators should be familiar with Self Service Portal setup pieces, EM 12c database lifecycle management capabilities and overall EM 12c monitoring framework. GO LIVE – Announce rollout of Database-as-a-Service to your SSA users. Users can login to the Self Service Portal and request/monitor/view their databases in Exadata based database cloud. Congratulations! You just delivered a successful database cloud implementation project! In future posts, we will cover these additional useful topics around database cloud – DBaaS Implementation tips and tricks – right from setup to self service to managing the cloud lifecycle ‘How to’ enable real production databases copies in DBaaS with rapid provisioning in database cloud Case study of a customer who recently achieved success with their transformational journey from traditional silo’ed environment on to Exadata based database cloud using Enterprise Manager 12c. More Information – Podcast on Database as a Service using Oracle Enterprise Manager 12c Oracle Enterprise Manager 12c Installation and Administration guide, Cloud Administration guide DBaaS Cookbook Exadata Discovery Cookbook Screenwatch: Private Database Cloud: Set Up the Cloud Self-Service Portal Screenwatch: Private Database Cloud: Use the Cloud Self-Service Portal Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• RightNow CX @ OpenWorld: What to Experience

  - by Tony Berk

  We want to welcome our RightNow CX customers to Oracle OpenWorld next week. Get ready for a great week and a whole new experience! For a high level overview of what is going on during the week, please review these previous posts: Is There a Cloud Over OpenWorld? and What to "CRM" in San Francisco? CRM Highlights for OpenWorld '12. Also, don't forget you can add on the Customer Experience Summit @ OpenWorld to make your week even more complete and get involved with the Experience Revolution! Below is a highlight of only some of the RightNow related sessions at OpenWorld. Please use OpenWorld Schedule Builder or check the OpenWorld Content Catalog for all of the session details and any time or location changes. Tip: Pre-enrolled session registrants via Schedule Builder are allowed into the session rooms before anyone else, so Schedule Builder will guarantee you a seat. Many of the sessions below will likely be at capacity. No better way to start off than hearing where Oracle RightNow is going! Oracle RightNow CX Cloud Service Vision and Roadmap (CON9764) - Oct 1, 10:45 AM. Oracle RightNow CX Cloud Service combines Web, social, and contact center experiences for a unified, cross-channel service solution in the cloud, enabling organizations to increase sales and adoption, build trust, strengthen relationships, and reduce costs and effort. Come to this session to hear from David Vap and his team of Oracle experts about where the product is going and how Oracle is committed to accelerating the pace of innovation and value to its customers. Interested in the Cloud and want to know why some leading CIOs are moving to the cloud? You can hear first hand from CIOs from Emerson, Intuit and Overstock.com: CIOs and Governance in the Cloud (CON9767) - Oct 3, 11:45 AM.   And of course there are a number of sessions that drill down into more specific areas. Here are just a few: Deliver Outstanding Customer Experiences: Oracle RightNow Dynamic Agent Desktop Cloud Service (CON9771) - Oct 1, 4:45 PM. This session covers how companies have delivered exceptional customer experiences and how the Oracle RightNow Dynamic Agent Desktop Cloud Service roadmap will evolve in the future. The Oracle RightNow Contact Center Experience suite includes incident management, knowledge, guided processes, and other service capabilities to unify the customer experience across channels. Come learn about the powerful tools that enable even your junior agents to consistently provide outstanding service across all customer interaction channels. Self-Service in the Age of Data Intimacy (CON11516) - Oct 1, 3:15. Even though businesses are generating more and more data around their relationships and interactions with customers, very little of the information a business generates ends up available to the contact center and even less is made available to the online service experience. The generic one-size-fits-all approach that typifies most online service experiences ultimately fails to address all user needs, and that failure ultimately leads to the continued use of high-cost agent-assisted channels for low-value interactions. This session introduces Oracle RightNow Web Experience’s Virtual Assistant and discusses how you can deliver rich, engaging, highly personalized experiences with the quality of agent-assisted service at a much lower cost. Improve Chat Experiences: Best Practices for Chat Pilots and Deployments (CON11517) - Oct 1, 4:45 PM. Today’s organizations are challenged to grow revenue and retain customers with fewer resources, and many have turned to chat as an approach to improving the customer experience, increasing sales conversions, and reducing costs at the same time. From setting goals and metrics and training staff to customizing and tuning the solution, this session provides best practices and lessons learned from a broad set of implementations to help you get the most out of your chat solution. Differentiated Experience with Web Service (CON9770) - Oct 2, 1:15 PM. A reputation for excellent customer service can differentiate your brand and drive revenue. In this session, learn how to develop that reputation by transforming your online self-service into a highly interactive, branded customer experience. See live examples of how Oracle RightNow Web Experience has helped customers deliver on their Web service strategies. Unifying the Agent’s Engagement Console (CON11518) - Oct 2, 1:15 PM. Does your customer experience suffer because your agents are toggling between multiple tools? Do your agent productivity and morale suffer as well? Come to this session to learn how Oracle RightNow CX Cloud Service seamlessly unifies these disparate systems into a single engagement console. Regardless of channel, powerful adaptive tools consistently guide agents across contextually aware personalized workflows. Great agent experiences drive great customer experiences. Oracle RightNow CX Cloud Service and the Oracle Customer Experience Portfolio (CON9775) - Oct 3, 10:15 AM. This session covers how Oracle’s integrated suite of customer experience (CX) products fits with the Oracle CX portfolio of products (Oracle Fusion Customer Relationship Management; the Oracle ATG, Oracle Endeca, and Oracle Knowledge product families; and Oracle Business Intelligence) to increase revenues, strengthen customer relationships, and reduce costs across the entire end-to-end customer lifecycle for companies that sell to consumers and those that sell to businesses. Greater Insights from Customer Engagements (CON9773) Oct 4, 12:45 PM. In this session, hear how to leverage service interaction insights, customer feedback, and segmented service engagements to improve the customer experience. Discover how customers, such as J&P Cycles, learn and take action based on business insights gained through their customer engagements. Again, these are just some of the sessions, so check out the Content Catalog for details on Knowledge Management, Customization, Integration and more in the Oracle Develop stream for Customer Experience. Be sure to visit the Oracle DEMOgrounds in the Moscone West Exhibit Hall. If this is your first OpenWorld, welcome! If you are returning, hi again and enjoy!

  Read the article

• Breaking up the Workday– Overcoming the Workaholic Syndrome

  - by dwahlin

  Hi, my name’s Dan Wahlin and I’m a workaholic – I admit it. It’s good from the standpoint that I get a lot done but it also has a lot of cons associated with it as well that I’m not proud of. I literally can’t watch TV without feeling like I should be doing something more productive (although I have no problem going to see movies at a theater or watching sporting events – that’s my escape I guess). On vacation it’s sometimes difficult the first few days to just “let go” of work and enjoy the time with my family. I always feel like I should be checking email and following up with different business projects. Fortunately, my wife knows me really well after 17 years of marriage and “gently” restricts my usage of laptops and other gadgets while we’re out. She also reminds me that constantly burying my face in gadgets just isn’t cool and shows a distinct lack of self control. On a given day I typically put in between 12 (at a minimum) up to 16-18 hours working on projects. My company does .NET consulting (ASP.NET/jQuery, SharePoint and Silverlight) but we also do a lot in the training space so there’s always a client project, some new courseware or some other deliverable that has to be worked on. My normal process for handling that is to just work my butt off and see how much I can get done. That process has worked well for a long time but when you start realizing that your happiness comes from how much work you accomplished that day then you have a problem. That’s especially true if you have kids (which I do….two awesome boys). It’s almost as if working more hours feels like I’m more successful or something which is of course ridiculous. It may actually mean that I’m too distracted or disorganized. Lately I’ve realized that while I’m still productive and always meet my deadlines, I’m really burnt out by the afternoon and have lost some of the excitement I used to have. Part of that’s normal I think given that I’ve been doing this for close to 15 years now, but in thinking through it more I realized that I just need to get away from the desk and take a break. By far, the happiest time of my life was my childhood. Part of that was due to having awesome parents, having far less responsibility (a big factor I suspect), being able to hang-out with friends at school, playing sports, games, etc. but I think a big part of the overall happiness came from being outside a lot. I lived on my bike as a little kid and as I grew up I shared time between riding an ATV all over the place, shooting hoops on the basketball court, playing golf and working on a golf course (all outside work of course).  Being a software developer and trainer I generally spend 95% or more of my day indoors and only see the sun when driving from place to place or by looking out the window (that’s sad because I live in a suburb of Phoenix, AZ where it’s nearly always sunny). I haven’t looked into any scientific studies on the matter, but I’d be willing to bet there’s a direct correlation between overall productivity/happiness and being outside some throughout the day (sunny or not). But, I wasn’t sure what to do about it since I do have a lot of deadlines I need to meet after all. While talking with my wife last night I mentioned how I feel like I’m in a rut and want to get the “fun” back that I used to have. She immediately said that I need to start making time for breaks (a real quick fact – she’s a lot smarter than me and nearly always right). Of course my first thought was that I’d be less productive taking breaks. If I spend 2 hours just relaxing then I’m losing 2 hours of work. But, I thought about it more and realized that I’m probably less productive when I work 10+ hours and only take less than 30 minutes for a lunch break to relax a little. I bet my brain is screaming, “Please let me relax a little so I can figure out these problems you’re trying to resolve!”. So, starting today I’m going to try to break the workaholic habit and spend time outside of the office. That could mean sitting around outside, working out, golfing, or whatever. I’ve decided that no gadgets are allowed during that time and that I shouldn’t work for more than 4 hours straight without taking a break. I have no idea how my little “break the workaholic syndrome” experiment will go or how long it will last, but I’d be very interested in hearing from others on how they keep fresh and focused without working yourself to death. If you have any specific ideas, techniques or practices you follow please share them. There’s a lot more to life than work and some of us (and I’m thinking of myself specifically) need to take a long, hard look at what kind of balance we currently have. I’d hate to look back at my life when I’m 80 years old and say, “The only thing I did was work – I missed out on life!”.

  Read the article

• Columnstore Case Study #2: Columnstore faster than SSAS Cube at DevCon Security

  - by aspiringgeek

  Preamble This is the second in a series of posts documenting big wins encountered using columnstore indexes in SQL Server 2012 & 2014.  Many of these can be found in my big deck along with details such as internals, best practices, caveats, etc.  The purpose of sharing the case studies in this context is to provide an easy-to-consume quick-reference alternative. See also Columnstore Case Study #1: MSIT SONAR Aggregations Why Columnstore? As stated previously, If we’re looking for a subset of columns from one or a few rows, given the right indexes, SQL Server can do a superlative job of providing an answer. If we’re asking a question which by design needs to hit lots of rows—DW, reporting, aggregations, grouping, scans, etc., SQL Server has never had a good mechanism—until columnstore. Columnstore indexes were introduced in SQL Server 2012. However, they're still largely unknown. Some adoption blockers existed; yet columnstore was nonetheless a game changer for many apps.  In SQL Server 2014, potential blockers have been largely removed & they're going to profoundly change the way we interact with our data.  The purpose of this series is to share the performance benefits of columnstore & documenting columnstore is a compelling reason to upgrade to SQL Server 2014. The Customer DevCon Security provides home & business security services & has been in business for 135 years. I met DevCon personnel while speaking to the Utah County SQL User Group on 20 February 2012. (Thanks to TJ Belt (b|@tjaybelt) & Ben Miller (b|@DBADuck) for the invitation which serendipitously coincided with the height of ski season.) The App: DevCon Security Reporting: Optimized & Ad Hoc Queries DevCon users interrogate a SQL Server 2012 Analysis Services cube via SSRS. In addition, the SQL Server 2012 relational back end is the target of ad hoc queries; this DW back end is refreshed nightly during a brief maintenance window via conventional table partition switching. SSRS, SSAS, & MDX Conventional relational structures were unable to provide adequate performance for user interaction for the SSRS reports. An SSAS solution was implemented requiring personnel to ramp up technically, including learning enough MDX to satisfy requirements. Ad Hoc Queries Even though the fact table is relatively small—only 22 million rows & 33GB—the table was a typical DW table in terms of its width: 137 columns, any of which could be the target of ad hoc interrogation. As is common in DW reporting scenarios such as this, it is often nearly to optimize for such queries using conventional indexing. DevCon DBAs & developers attended PASS 2012 & were introduced to the marvels of columnstore in a session presented by Klaus Aschenbrenner (b|@Aschenbrenner) The Details Classic vs. columnstore before-&-after metrics are impressive. Scenario Conventional Structures Columnstore ? SSRS via SSAS 10 - 12 seconds 1 second >10x Ad Hoc 5-7 minutes (300 - 420 seconds) 1 - 2 seconds >100x Here are two charts characterizing this data graphically.  The first is a linear representation of Report Duration (in seconds) for Conventional Structures vs. Columnstore Indexes.  As is so often the case when we chart such significant deltas, the linear scale doesn’t expose some the dramatically improved values corresponding to the columnstore metrics.  Just to make it fair here’s the same data represented logarithmically; yet even here the values corresponding to 1 –2 seconds aren’t visible.  The Wins Performance: Even prior to columnstore implementation, at 10 - 12 seconds canned report performance against the SSAS cube was tolerable. Yet the 1 second performance afterward is clearly better. As significant as that is, imagine the user experience re: ad hoc interrogation. The difference between several minutes vs. one or two seconds is a game changer, literally changing the way users interact with their data—no mental context switching, no wondering when the results will appear, no preoccupation with the spinning mind-numbing hurry-up-&-wait indicators.  As we’ve commonly found elsewhere, columnstore indexes here provided performance improvements of one, two, or more orders of magnitude. Simplified Infrastructure: Because in this case a nonclustered columnstore index on a conventional DW table was faster than an Analysis Services cube, the entire SSAS infrastructure was rendered superfluous & was retired. PASS Rocks: Once again, the value of attending PASS is proven out. The trip to Charlotte combined with eager & enquiring minds let directly to this success story. Find out more about the next PASS Summit here, hosted this year in Seattle on November 4 - 7, 2014. DevCon BI Team Lead Nathan Allan provided this unsolicited feedback: “What we found was pretty awesome. It has been a game changer for us in terms of the flexibility we can offer people that would like to get to the data in different ways.” Summary For DW, reports, & other BI workloads, columnstore often provides significant performance enhancements relative to conventional indexing.  I have documented here, the second in a series of reports on columnstore implementations, results from DevCon Security, a live customer production app for which performance increased by factors of from 10x to 100x for all report queries, including canned queries as well as reducing time for results for ad hoc queries from 5 - 7 minutes to 1 - 2 seconds. As a result of columnstore performance, the customer retired their SSAS infrastructure. I invite you to consider leveraging columnstore in your own environment. Let me know if you have any questions.

  Read the article

• Spacewalk 2.0 provided to manage Oracle Linux systems

  - by wcoekaer

  Oracle Linux customers have a few options to manage and provision their servers. We provide a license to use Oracle Enterprise Manager's Linux OS management, monitoring and provisioning features without additional cost for every server that has an Oracle Linux support subscription. So there is no additional pack to license and no additional per server cost, it's all included in our Basic, Premier and Systems support subscriptions. The nice thing with Oracle Enterprise Manager is that you end up with a single management product that can manage all aspects of your software stack. You have complete insight into the applications running, you have roles and responsibilities, you have third party connectors for storage or other products and it makes it very easy and convenient to correlate data and events when something happens. If you use Oracle VM as well, you end up with a complete cloud portal with selfservice, chargeback, etc... Another, much simpler option, is just using yum. It is very easy to take a server and create directories and expose these through apache as repositories. You can have a simple yum config on each server pointing to a few specific repositories. It requires some manual effort in terms of creating directories, downloading packages and creating local repo files but it's easy to do and for many people a preferred solution. There are also a good number of customers that just connect their servers directly to ULN or to our free update server public-yum. Just to re-iterate, our public-yum servers have all the errata and updates available for free. Now we added another option. Many of our customers have switched from a competing Linux vendor and they had familiarity with their management tools. Switching to Oracle for support is very easy since we don't require changes to the installed servers but we also want to make sure there is a very easy and almost transparent switch for the management tools as well. While Oracle Enterprise Manager is our preferred way of managing systems, we now are offering Spacewalk 2.0 to our customers. The community project can be found here. We have made a few changes to ensure easy and complete support for Oracle Linux, tested it with public-yum, etc.. You can find the rpms in our public-yum repos at http://public-yum.oracle.com/repo/OracleLinux/OL6/. There are repositories for spacewalk server and then for each version (OL5,OL6) and architecture (x86 and x86-64) we have the client repositories as well. Spacewalk itself is only made available for OL6 x86-64. Documentation can be found here. I set it up myself and here are some quick steps on how you can get going in just a matter of minutes: Spacewalk Server Installation : 1) Installing an Oracle Database Use an existing Oracle Database or install a new Oracle Database (Standard or Enterprise Edition) [at this time use 11g, we will add support for 12c in the near future]. This database can be installed on the spacewalk server or on a separate remote server. While Oracle XE might work to create a small sample POC, we do not support the use of Oracle XE, spacewalk repositories can become large and create a significant database workload. Customers can use their existing database licenses, they can download the database with a trial licence from http://edelivery.oracle.com or Oracle Linux subscribers (customers) will be allowed to use the Oracle Database as a spacewalk repository as part of their Oracle Linux subscription at no additional cost. |NOTE : spacewalk requires the database to be configured with the UTF8 characterset. |Installation will fail if your database does not use UTF8. |To verify if your database is configured correctly, run the following command in sqlplus: | |select value from nls_database_parameters where parameter='NLS_CHARACTERSET'; |This should return 'AL32UTF8' 2) Configure the database schema for spacewalk Ideally, create a tablespace in the database to hold the spacewalk schema tables/data; create tablespace spacewalk datafile '/u01/app/oracle/oradata/orcl/spacewalk.dbf' size 10G autoextend on; Create the database user spacewalk (or use some other schema name) in sqlplus. example : create user spacewalk identified by spacewalk; grant connect, resource to spacewalk; grant create table, create trigger, create synonym, create view, alter session to spacewalk; grant unlimited tablespace to spacewalk; alter user spacewalk default tablespace spacewalk; 4) Spacewalk installation and configuration Spacewalk server requires an Oracle Linux 6 x86-64 system. Clients can be Oracle Linux 5 or 6, both 32- and 64bit. The server is only supported on OL6/64bit. The easiest way to get started is to do a 'Minimal' install of Oracle Linux on a server and configure the yum repository to include the spacewalk repo from public-yum. Once you have a system with a minimal install, modify your yum repo to include the spacewalk repo. Example : edit /etc/yum.repos.d/public-yum-ol.repo and add the following lines at the end of the file : [spacewalk] name=spacewalk baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/spacewalk20/server/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=1 Install the following pre-requisite packages on your spacewalk server : oracle-instantclient11.2-basic-11.2.0.3.0-1.x86_64 oracle-instantclient11.2-sqlplus-11.2.0.3.0-1.x86_64 rpm -ivh oracle-instantclient11.2-basic-11.2.0.3.0-1.x86_64 rpm -ivh oracle-instantclient11.2-sqlplus-11.2.0.3.0-1.x86_64 The above RPMs can be found on the Oracle Technology Network website : http://www.oracle.com/technetwork/topics/linuxx86-64soft-092277.html As the root user, configure the library path to include the Oracle Instant Client libraries : cd /etc/ld.so.conf.d echo /usr/lib/oracle/11.2/client64/lib oracle-instantclient11.2.conf ldconfig Install spacewalk : # yum install spacewalk-oracle The above yum command should download and install all required packages to run spacewalk on your local server. | NOTE : if you did a full, desktop or workstation installation, | you have to remove the JTA package | BEFORE installing spacewalk-oracle (rpm -e --nodeps jta) Once the installation completes, simply run the spacewalk configuration tool and you are all set. (make sure to run the command with the 2 arguments) spacewalk-setup --disconnected --external-db Answer the questions during the setup, ensure you provide the current database user (example : spacewalk) and password (example : spacewalk) and database server hostname (the standard hostname of the server on which you have deployed the Oracle database) At the end of the setup script, your spacewalk server should be fully configured and you can log into the web portal. Use your favorite browser to connect to the website : http://[spacewalkserverhostname] The very first action will be to create the main admin account.

  Read the article

• Maximize Performance and Availability with Oracle Data Integration

  - by Tanu Sood

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-fareast-font-family:Calibri; mso-bidi-font-family:"Times New Roman";} Alert: Oracle is hosting the 12c Launch Webcast for Oracle Data Integration and Oracle Golden Gate on Tuesday, November 12 (tomorrow) to discuss the new capabilities in detail and share customer perspectives. Hear directly from customer experts and executives from SolarWorld Industries America, British Telecom and Rittman Mead and get your questions answered live by product experts. Register for this complimentary webcast today and join in the discussion tomorrow. Author: Irem Radzik, Senior Principal Product Director, Oracle Organizations that want to use IT as a strategic point of differentiation prefer Oracle’s complete application offering to drive better business performance and optimize their IT investments. These enterprise applications are in the center of business operations and they contain critical data that needs to be accessed continuously, as well as analyzed and acted upon in a timely manner. These systems also need to operate with high-performance and availability, which means analytical functions should not degrade applications performance, and even system maintenance and upgrades should not interrupt availability. Oracle’s data integration products, Oracle Data Integrator, Oracle GoldenGate, and Oracle Enterprise Data Quality, provide the core foundation for bringing data from various business-critical systems to gain a broader, unified view. As a more advance offering to 3rd party products, Oracle’s data integration products facilitate real-time reporting for Oracle Applications without impacting application performance, and provide ability to upgrade and maintain the system without taking downtime. Oracle GoldenGate is certified for Oracle Applications, including E-Business Suite, Siebel CRM, PeopleSoft, and JD Edwards, for moving transactional data in real-time to a dedicated operational reporting environment. This solution allows the app users to offload the resource-heavy queries to the reporting instance(s), reducing CPU utilization, improving OLTP performance, and extending the lifetime of existing IT assets. In addition, having a dedicated reporting instance with up-to-the-second transactional data allows optimizing the reporting environment and even decreasing costs as GoldenGate can move only the required data from expensive mainframe environments to cost-efficient open system platforms.  With real-time data replication capabilities GoldenGate is also certified to enable application upgrades and database/hardware/OS migration without impacting business operations. GoldenGate is certified for Siebel CRM, Communications Billing and Revenue Management and JD Edwards for supporting zero downtime upgrades to the latest app version. GoldenGate synchronizes a parallel, upgraded system with the old version in real time, thus enables continuous operations during the process. Oracle GoldenGate is also certified for minimal downtime database migrations for Oracle E-Business Suite and other key applications. GoldenGate’s solution also minimizes the risk by offering a failback option after the switchover to the new environment. Furthermore, Oracle GoldenGate’s bidirectional active-active data replication is certified for Oracle ATG Web Commerce to enable geographically load balancing and high availability for ATG customers. For enabling better business insight, Oracle Data Integration products power Oracle BI Applications with high performance bulk and real-time data integration. Oracle Data Integrator (ODI) is embedded in Oracle BI Applications version 11.1.1.7.1 and helps to integrate data end-to-end across the full BI Applications architecture, supporting capabilities such as data-lineage, which helps business users identify report-to-source capabilities. ODI is integrated with Oracle GoldenGate and provides Oracle BI Applications customers the option to use real-time transactional data in analytics, and do so non-intrusively. By using Oracle GoldenGate with the latest release of Oracle BI Applications, organizations not only leverage fresh data in analytics, but also eliminate the need for an ETL batch window and minimize the impact on OLTP systems. You can learn more about Oracle Data Integration products latest 12c version in our upcoming launch webcast and access the app-specific free resources in the new Data Integration for Oracle Applications Resource Center.

  Read the article

< Previous Page | 422 423 424 425 426 427 428 429 430 431 432 433  | Next Page >