Search Results

Search found 1565 results on 63 pages for 'ati mobility radeon'.

Page 43/63 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

• My desktop disappeared, how do I get it back?

  - by sunny

  I have Ubuntu 12.04 LTS. This morning when I logged into my Ubuntu, after login screen the complete desktop was empty, the only operation I could perform is right-click and open terminal. What I've tried: Ctrl+Alt+F1 unity --reset : didn't work From terminal unity --reset : didn't work And from login screen selecting Ubuntu 2D and that also didn't solve the problem. My laptop is Toshiba SA-60 onboard ATI graphic card with 1 GB RAM. Please tell me how to solve this problem. I don't want to reinstall Ubuntu as whenever I install a I/O error pops up, forget about that. I don't want to reinstall Ubuntu. Please help.

  Read the article

• 10.10 Acer 7551g - hibernation and suspending don't work

  - by gonzunio

  Issue is quite the same like here, I've tried everything I found and nothing happens. If I use uswsusp, suspending works good, but graphics doesn't wake up, when I want to hibernate system, it tells me "Looking for splash system... none s2disk:snapshotting system" and nothing happens. I'm using ATI drivers, i've tried to disable kms, unload usb3 and network drivers, still nothing. Please help me, I don't want to come back to Windows after my 2-year-relationship with Linux. I can share all files I have with you, just help me.

  Read the article

• Distorted choppy audio in Precise

  - by Misery

  After installing Precise on my PC, some problems with soud occure. While using Lucid there were no problems. The sound is choppy and distorted in low tones range. As I absolutely have no experience in setting/testing and doing anything with Audo Devices I need help even to diagnose the problem. update: sudo lshw -c multimedia *-multimedia description: Audio device product: Radeon X1200 Series Audio Controller vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 5.2 bus info: pci@0000:01:05.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=snd_hda_intel latency=32 resources: irq:19 memory:fdafc000-fdafffff *-multimedia description: Audio device product: SBx00 Azalia (Intel HDA) vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 14.2 bus info: pci@0000:00:14.2 version: 00 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: driver=snd_hda_intel latency=32 resources: irq:16 memory:fe024000-fe027fff update 2: It has something to do with the volume. If the audio is quiet it is not choppy, if the sound is loud then it begins to be choppy. Regards, Misery

  Read the article

• ubuntu 12.10 slow application load upon restart

  - by Adam

  new ubuntu user. after boot (boot is quite fast), opening applications such as firefox, libra, system settings, takes close to 10 seconds to open. after the application is loaded in RAM, the application opens fine. the system feels snappy, quick. when i have two FIREFOX open, unity is snappy in showing me the two windows side by side. but upon bootup, loading the application takes 10 seconds. there is not much hdd activity. fresh install. its the same for system settings and browsing system settings. when system settings is opened for the first time (10 second), and i click for example Color, it will take quite long to open the color settings. hardware: i3 4gb ram radeon 5770 250gb sata gigabyte h55m motherboard i am using ubuntu straight out of the box, no propriety drivers. 64 bit. i have reinstalled OS, and still the same.

  Read the article

• Problems after installing Ubuntu LiveUSB on my 2nd HD

  - by user113106

  I decided to create a Ubuntu USB installer using the Universal USB Installer, selecting a Ubuntu 12.10 ISO. I selected my D: drive, my NON-windows7 carrying drive as install. After this I Re-booted my system and my PC began to Run the Ubuntu Boot-startscreen every time I power up the machine, giving errors like this: Root=Unknown I used my girlfriend's laptop to create, on the exact same way, a real! USB Ubuntu installer. Booting from that USB, picking the option Run Ubuntu from this USB I get the following error: http://postimage.org/image/63qkv98c1/ Let's try installing it from that USB to a Hard-Disk: http://postimage.org/image/usqbwymfx/ As I said: I do not have the Option to pick my Boot-section, at this very moment I can only access to the Ubuntu installation and nothing else. I've read about 90% of other Questions that could've been related, but I could not find a solution. BTW I'm running a Acer Aspire 2Quadcore 4gb DDR 2 Ati Radeon HD, 64bit and I've set my Bios OS-usage from Windows to "Others"

  Read the article

• How to fix "The system is running in low-graphics mode" error?

  - by jokerdino

  Note: This is an attempt to create a canonical question that covers all instances of "low-graphics mode" error that occurs to a user, including but not limited to installation of wrong drivers, incorrect or invalid lightdm greeters, low disk space, incorrect installation of graphics card like ATI and Nvidia, incorrect configuration of xorg.conf file while setting up multiple monitors among others. If you are experiencing the "low-graphics mode" error when trying to login but none of the following answers work for you, please do ask a new question and then update the answers of this canonical question as and when your new question gets answered. When I try to boot into my computer, I am getting this error: The system is running in low-graphics mode Your screen, graphics cards, and input device settings could not be detected correctly. You will need to configure these yourself. How do I fix the failsafe X mode and login into my computer? Answer index: The greeter is invalid

  Read the article

• Laptop overheats while using Internet

  - by therealnube

  YES I have figured out that my laptop overheats while using the internet via an Ethernet port through a broadband connection.Strange isn't it ? Well I need to know WHY ? . I have installed ATI Graphics : Vesa Madison as they appear to be working very fine. Temperature of my i7-hp pavilion dv6 rises from 67degrees to a superhot 85+ and also to 106degrees where my laptop shuts down. When running torrents or Chromium I hardly open 4 Tabs so there is no chance for CPU over-loading due to multiple processes.NEED HELP.And Thank You for your time.

  Read the article

• Ubuntu 11.0 HDMI Video Card No 5.1 Audio

  - by ryandlf

  I am using Ubuntu and XMBC on my HTPC and have chosen the Radeon HD5570 Video card which has an HDMI output. In the sound preferences there is no surround sound option for the video card just stereo and although I can get sound through it in XBMC, my receiver does not state Dolby Digital on movies that are in fact Dolby so its definitely not giving me the true sound it should. Does this card not support surround sound through HDMI and I somehow missed it? If that is the case does anyone have suggestion that has been tested and works? Id like to know its going to work before investing in yet another video card.

  Read the article

• 12.04 Software "RAID 0" on desktop replacement, 2 HDD?

  - by gregzeng

  Hardware: HP Pavilion DV7 notebook: 8GB DDR3, 2x 750GB SATA2 HDD, I7 c+ Radeon GPU, eSATA, Bluray, etc. Currently multiboot with Win7-64 + choice of 5 'buntu-64. Prefer Xubuntu-64-alternate, but not able to install software RAID-0 at the last active partition on both HDDs. Tried many types: real boot partition, etc. All my Linux op sys boot successfully from the extended partitions on both drives, but without RAID of any kind. Theory - yes. But has anyone really succeeded with 12.04 software RAID-0?

  Read the article

• After 10.10 -> 11.04 upgrade, can only login via Classic (No Effects)

  - by Ryan P.

  Yesterday I upgraded from 10.10 to 11.04, everything seemed to go okay until immediately after login: the desktop goes into a "corrupted" looking state (similar to having too high resolution set). I can see some kind of movement by moving the mouse around/right clicking, and can enter text terminals via ctrl + alt + f1 It does this in both plain "Ubuntu" and "Ubuntu Classic", and only seems to login/startup properly with Ubuntu Classic (No Effects). I have checked my video card (Radeon X600) and run the unity support test which passes with all "yes" results (Unity supported: yes): /usr/lib/nux/unity_support_test -p I have tried re-installing my Ubuntu desktop: rm -rf .gnome .gnome2 .gconf .gconfd .metacity sudo apt-get remove ubuntu-desktop sudo apt-get install ubuntu-desktop With no success. I can workaround for now with Classic (No Effects), but I'd really like to find the root problem. Any suggestions on what else to try would be appreciated!

  Read the article

• Fatal Error when booting

  - by Denja

  I'm running Ubuntu 10.10 with ATI proprietary FGLRX graphic drivers When I boot, I can see this very quick message appearing; I don't have time to read it: **Fatal Error ..................................**(&@something i cant read) I searched through the log file in /var/log/ in order to find what is wrong and I did find something in the /var/log/Xorg.1.log: 21:31:08 [ 15.734] (--) using VT number 1 [ 204.647] Fatal server error: [ 204.647] xf86OpenConsole: VT_WAITACTIVE failed: Interrupted system call [ 204.647] [ 204.647] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 204.647] Please also check the log file at "/var/log/Xorg.1.log" for additional information. [ 204.647] But this is already Xorg.1.log. And there is a Xorg.0.log also & Xorg.0.log.old but it doesnt have any error in it. My system seems to work properly and it seems its not affected by this But how do I correct this message? Any suggestions?

  Read the article

• ubuntu is becoming more unstable

  - by Michael Hennessey

  I find ubuntu extremely unstable with mouse freezes (that can be corrected with control key), constant Compiz crashes ( with ATI non proprietary drivers also), problems installing drivers ( why would I want a video driver that fails to play most games, with loss of function of so many games (BZ flag?? has been around for years with no problems). I get the feeling that there is so one in your dept who is intentionally making poor and unstable choices for less than altruistic reasons. Whatever happened has been worsening ever since Unity became a choice. I have tried Kubuntu, Mint, Lubuntu and several other variants with similar poor results. Be aware I have used Ubuntu for many years.

  Read the article

• Mic not working on Lenovo G470

  - by Caveman

  I used a Lenovo G470 laptop (Core i5 2410M processor, AMD Radeon 6370M and 2GB DDR3 RAM) and I installed Ubuntu 12.04. I can't get the microphone to work. I encountered this type of issue before in my old Acer Aspire One with Ubuntu 10.04/10.10, and installing PulseAudio Volume Control and tweaking a little solves the problem. I tried the same solution to no avail in 12.04. I tried entering the alsa in terminal and my mic is not detected there. Does anybody encountered a similar problem? Any help will be greatly appreciated.

  Read the article

• Minecraft program frame rate is very slow

  - by Cade

  I have recently downloaded Minecraft to Ubuntu 12.04. It launches and plays successfully, however- the frame rates for the game are extremely slow. They never go past 9 fps and usually drop below 3 fps. I have been a Windows XP user for years and have just recently switched to Ubuntu, so I'm not an expert with this OS. My video card is a Diamond Stealth s60 with Radeon 7000. I don't know what other information you guys need but if you ask for it, and would please tell me how to get to it, I will tell you as soon as I can. Thanks for your help.

  Read the article

• Setting up multiple monitors KDE 12.04

  - by Brandon

  I have 1 1920x1080 display that I am using as a primary display, with a 1600x900 display off to my side. I have tried to set up the smaller display to be positioned to the right of the larger display, but I can't. The only option that works is to use it as a clone. When I connect the smaller monitor to another DVI port on my AMD Radeon HD 6950, it doesnt work at all. I can provide more information if needed. Thank you!

  Read the article

• Getting trayer to work with dual screen setup

  - by Ikke

  I'm using XMonad as my window manager, and want to use trayer as a icon panel for things like nm-applet. The problem was that the panel wouldn't appear on the top of the screen. If I set it to the bottom it just appeared. After a lot of trying, I found out it is because my xorg.conf is setup for dualscreens, and probably the trayer panel is spawned outside my view (I currently have only a single screen, but I switch a lot). After manualy tweaking the xorg.conf file to allow for just one screen, the panel appears on the right spot. These are the things I had to modify: Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1366x768" Option "TargetRefresh" "60" Option "Position" "0 0" # Was 1280 256 Option "Rotate" "normal" Option "Disable" "false" EndSection SubSection "Display" Viewport 0 0 Virtual 1366 768 # Was 2646 2646 Depth 24 EndSubSection The problem is ofcourse that I can't use my dual screen setup anymore. Is there a way to force trayer on the right position even with the dualscreen setup?

  Read the article

• After 10.10 -> 11.04 upgrade, can only login via Classic (No Effects)

  - by Ryan P.

  Yesterday I upgraded from 10.10 to 11.04, everything seemed to go okay until immediately after login: the desktop goes into a "corrupted" looking state (similar to having too high resolution set). I can see some kind of movement by moving the mouse around/right clicking, and can enter text terminals via ctrl + alt + f1 It does this in both plain "Ubuntu" and "Ubuntu Classic", and only seems to login/startup properly with Ubuntu Classic (No Effects). I have checked my video card (Radeon X600) and run the unity support test which passes with all "yes" results (Unity supported: yes): /usr/lib/nux/unity_support_test -p I have tried re-installing my Ubuntu desktop: rm -rf .gnome .gnome2 .gconf .gconfd .metacity sudo apt-get remove ubuntu-desktop sudo apt-get install ubuntu-desktop With no success. I can workaround for now with Classic (No Effects), but I'd really like to find the root problem. Any suggestions on what else to try would be appreciated!

  Read the article

• Ubuntu 12.10 64b does not shutdown

  - by user108264

  I am a new linux user so i am not familiar with what actually is needed to check. When shutting down or trying to restart i get a screen with yellow letters and the system does not close or restart. I have to shut down manually. I can't type all the numbers but i will give the last ones. [90102.232650] [ end-trace 435966f5b367871 ] this seems to have happened after i downgraded the xorg so i can get drivers for my ATI card(4850HD). The suspend command works fine.

  Read the article

• Massive crash and kernel panic after updates yesterday, what now?

  - by Ghost

  Got 12.04 on an AMD+radeon machine, everything was running fine until last night when the update manager installed new packages, and now the moment I open a browser (firefox, chromium, anything) it crashes instantly. It says warning: at build/buildd/linux-3.5.0/arch/x86/kernel/smp.c:123 native_smp_send_reschedule+0x5b/0x60() Pid: 2432, comm: chrome_dbthread tainted: G D 3.5.0-2generic #2-ubuntu I already tried uninstalling the packages from the update log, didn't solve a thing. Depending of which browser I use I get a different reaction, like a complete freeze instead of a text console crash. Ideas? I really don't know what to do.

  Read the article

• Ubuntu 12.04 cannot start

  - by user57215

  I just installed Ubuntu 12.04 64bit, and I cannot start it. I tried twice. The first time, I used a CD I burned. (The CD works for my another computer, so it is OK.) After wubi did something in Windows, it rebooted. Then the screen was stuck where there is an ubuntu logo at the center and 5 dots below. I waited for more than half hour, it was still there and nothing happened. The second time, I installed 11.10, then upgrade to 12.04 in a the newly install 11.10. BTW, the 11.10 did start. After upgrading, I rebooted the computer, it was stuck at the same place. Any one can help me on this? The computer is AMD Phenom II X4 965 + ATI RADEON HD4870. Thanks a lot!

  Read the article

• Ubuntu 12.04 on MBPro, Early 2011, options

  - by sthysel

  I have a 2.2 GHz i7, 4GB MacBook Pro 8.3, AMD Radeon HD 6750M 1024 MB, Early 2011. As far as I see I have two options, running Ubuntu on this hardware: VMWare/Virtualbox and Ubuntu in a VM, I already ordered a 16G RAM upgrade for this. Wipe OSX and go Ubuntu native, with 16G RAM, yay ! I'm kinda leaning towards option 2 as I tend to spend 90% of my time in dev VM's at work anyway. All my other machines at home, and most at work are Ubuntu/Linux as well. I have a Mac mini on standby for the odd Itunes backup/sync. If I don't have to keep OSX around, I would like to get rid of it altogether. Ubuntu support on Mac hardware seems to be a hit and miss affair as far as I can tell. Does anyone have good success running a recent version of Ubuntu on this hardware ? Thanks

  Read the article

• fresh install, update and x-windows no longer working after login 12.10

  - by Tigz

  I Just recently installed desktop 12.10 on laptop, all was working fine logged in and it stated it wanted to update as it found updates. naturally I let it update and it asked me to reboot to use the new updates did that, now it boots fine i get login prompt. login as per normal then all i get is background with nothing else, if i turn off the wireless i get the disconnection notification pop up but i have nothing else on screen any wrror messages gets displayed as well but their is nothing. their was one program that failed that no longer prompts which gives options of reloading or just closing and continuing either way it just look like it hangs I can ctrl alt del to log out and it does that fine but still wont load no mater how many times i try saw a topic about a ati driver playing up which he typed the following in a ty which i can get to all of them as well. export DISPLAY=:0;gnome-shell --replace the answer i got back was the program gnome-shell is not installed you can install it by typing sudo apt-get install gnome-shell i also tried sudo pkill X which did nothing any help would be appreciated Thanks

  Read the article

• The system is running in low graphics mode error before ubuntu gets installed

  - by hellodear

  I am using Bootable USB for installing Ubuntu with Windows 8.1. I have put pendrive and then booting my USB. When it shows me to try Ubuntu or install Ubuntu. Then I press Try ubuntu and then it says" "The system is running in low graphics mode". Then I press Ok. Then it shows 4 options. Then again I click Ok. Then it shows a black screen and nothing happens. I have tried all possible answers provided in AU. What should I do? Please help. I am using Windows 8.1 with dedicated graphic card (Video card - AMD Radeon HD 8670M). Installing 12.04 LTS with pre-installe Windows 8.1 in a Dell Laptop 3537 inspiron.

  Read the article

• I cannot change the screen brightness

  - by user1793249

  here's my problem: Ever since I installed Ubuntu 12.10 on my computer I haven't been able to change the screen brightness, it was always set to the maximum. I did take a look at this post: Decrease Backlight Below Minimum And it helped me resolved the issue with the unbearable brightness, however one problem persists: I cannot change it through "Brightness & Lock" or the function buttons (F2 and F3), when I press the buttons, the animation shows up but nothing happens. I tried the following: http://www.refreshit.info/2012/08/solved-brightness-increase-and-decrease.html It did nothing... If it helps: I have an HP-dv6 6185la, it has an ATI Radeon 6770M HD card and an Intel HD Integrated Graphics Card It only detects the "Intel® Sandybridge Mobile" Thanks in advance.

  Read the article

• Radon HD 6870 compatibility with Ubuntu 11.10

  - by mhost

  Does anyone have experience with the XFX Radeon HD 6870 on Ubuntu 11.10? I've googled and the best I could find was someone getting the card to 'work' on linux. Nothing specific about ubuntu and this card. Specifically, I want to be able to use the full 1900x1200 resolution and watch 1080p movies. If yes, was it very complicated to get working? Note: I do not have the card yet, I am debating buying it, but would like to know beforehand because there is a restocking fee if I have to return it. Thanks.

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >