Search Results

Search found 11687 results on 468 pages for 'ex networking guy'.

Page 430/468 | < Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >

  • #OOW 2012: Big Data and The Social Revolution

    - by Eric Bezille
    As what was saying Cognizant CSO Malcolm Frank about the "Futur of Work", and how the Business should prepare in the face of the new generation  not only of devices and "internet of things" but also due to their users ("The Millennials"), moving from "consumers" to "prosumers" :  we are at a turning point today which is bringing us to the next IT Architecture Wave. So this is no more just about putting Big Data, Social Networks and Customer Experience (CxM) on top of old existing processes, it is about embracing the next curve, by identifying what processes need to be improve, but also and more importantly what processes are obsolete and need to be get ride of, and new processes put in place. It is about managing both the hierarchical and structured Enterprise and its social connections and influencers inside and outside of the Enterprise. And this does apply everywhere, up to the Utilities and Smart Grids, where it is no more just about delivering (faster) the same old 300 reports that have grown over time with those new technologies but to understand what need to be looked at, in real-time, down to an hand full relevant reports with the KPI relevant to the business. It is about how IT can anticipate the next wave, and is able to answers Business questions, and give those capabilities in real-time right at the hand of the decision makers... This is the turning curve, where IT is really moving from the past decade "Cost Center" to "Value for the Business", as Corporate Stakeholders will be able to touch the value directly at the tip of their fingers. It is all about making Data Driven Strategic decisions, encompassed and enriched by ALL the Data, and connected to customers/prosumers influencers. This brings to stakeholders the ability to make informed decisions on question like : “What would be the best Olympic Gold winner to represent my automotive brand ?”... in a few clicks and in real-time, based on social media analysis (twitter, Facebook, Google+...) and connections link to my Enterprise data. A true example demonstrated by Larry Ellison in real-time during his yesterday’s key notes, where “Hardware and Software Engineered to Work Together” is not only about extreme performances but also solutions that Business can touch thanks to well integrated Customer eXperience Management and Social Networking : bringing the capabilities to IT to move to the IT Architecture Next wave. An example, illustrated also todays in 2 others sessions, that I had the opportunity to attend. The first session bringing the “Internet of Things” in Oil&Gaz into actionable decisions thanks to Complex Event Processing capturing sensors data with the ready to run IT infrastructure leveraging Exalogic for the CEP side, Exadata for the enrich datasets and Exalytics to provide the informed decision interface up to end-user. The second session showing Real Time Decision engine in action for ACCOR hotels, with Eric Wyttynck, VP eCommerce, and his Technical Director Pascal Massenet. I have to close my post here, as I have to go to run our practical hands-on lab, cooked with Olivier Canonge, Christophe Pauliat and Simon Coter, illustrating in practice the Oracle Infrastructure Private Cloud recently announced last Sunday by Larry, and developed through many examples this morning by John Folwer. John also announced today Solaris 11.1 with a range of network innovation and virtualization at the OS level, as well as many optimizations for applications, like for Oracle RAC, with the introduction of the lock manager inside Solaris Kernel. Last but not least, he introduced Xsigo Datacenter Fabric for highly simplified networks and storage virtualization for your Cloud Infrastructure. Hoping you will get ready to jump on the next wave, we are here to help...

    Read the article

  • Cientos de Directores Financieros se congregaron en el evento “Innovación y Excelencia en la Función Financiera”

    - by Noelia Gomez
    v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} El pasado 24 de Octubre tuvo lugar el evento “Innovación y Excelencia en la Función Financiera” en la Fundación Rafael de Pino, Madrid (que ya anunciamos aquí). APD, en colaboración con Oracle, organizaron esta jornada con el objetivo de analizar el proceso de transformación del Director Financiero en las compañías (aquí puedes ver un estudio sobre ello). Enrique Sanchez de Leon, Director de APD, fue el encargado de abrir la jornada con una calurosa bienvenida a los invitados. Tras él, Fernando Rumbero, Iberia Applications Cluster Leader de Oracle , comenzó dando unas pinceladas sobre los cambios a los que los Directores Financieros deben estar preparados para convertirse en parte de la estrategia de la compañía. Después de que todos los ponentes fueran presentados y se acomodaran en su lugar del escenario de aquella gran sala, Oriol Farré, Presales Director de Oracle, tomó la palabra para profundizar sobre el nuevo rol estratégico del Director Financiero y cómo éste se está convirtiendo cada vez más en el catalizador del cambio dentro de las empresas (¿tú lo eres? aquí hablamos de cómo puedes evaluarlo) Por su parte, Maria Jesús Carrato, Profesora de Dirección Financiera Internacional en el IE y Directora Financiera del Grupo SM mostró su visión sobre cómo serán los Departamentos Financieros del futuro. Después llego el turno de Ramón Arguelaguet, Financial Controller & Reporting Senior Manager de Vodafone, que profundizo en la innovación y la transformación lideradas por los Directores Financieros dentro de las organizaciones. Por último, pero no menos importante, Juan Jesús Donoso, Director Económico de Cruz Roja Española, nos mostro el punto de vista de la gestión de una organización sin ánimo de lucro. Finalmente, en la mesa redonda, cada uno de los integrantes dio su punto de vista sobre el nuevo rol de Director Financiero y los nuevos retos a los que se enfrentan. El broche final de la jornada la puso el coctel para abrir paso a un espacio de networking que sin duda los cientos de Directores Financieros aprovecharon para intercambiar puntos de vista, conocer a nuevos compañeros y reencontrarse con muchos otros. Si estuviste en el evento… ¿qué te pareció? Tal vez no encontraste el momento de plantear alguna cuestión. Ahora puedes hacerlo en los comentarios y se lo trasladaremos a los ponentes. Contact 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";}

    Read the article

  • Webcast Q&A: Demystifying External Authorization

    - by B Shashikumar
    Thanks to everyone who joined us on our webcast with SANS Institute on "Demystifying External Authorization". Also a special thanks to Tanya Baccam from SANS for sharing her experiences reviewing Oracle Entitlements Server. If you missed the webcast, you can catch a replay of the webcast here.  Here is a compilation of the slides that were used on today's webcast.  SANS Institute Product Review: Oracle Entitlements Server We have captured the Q&A from the webcast for those who couldn't attend. Q: Is Oracle ADF integrated with Oracle Entitlements Server (OES) ? A:  In Oracle Fusion Middleware 11g and later, Oracle ADF, Oracle WebCenter, Oracle SOA Suite and other middleware products are all built on Oracle Platform Security Services (OPSS). OPSS privodes many security functions like authentication, audit, credential stores, token validaiton, etc. OES is the authorization solution underlying OPSS. And OES 11g unifies different authorization mechanisms including Java2/ABAC/RBAC.  Q: Which portal frameworks support the use of OES policies for portal entitlement decisions? A:  Many portals including Oracle WebCenter 11g  run natively on top of OES. The authorization engine in WebCenter is OES. Besides, OES offers out of the box integration with Microsoft SharePoint. So SharePoint sites, sub sites, web parts, navigation items, document access control can all be secured with OES. Several other portals have also been secured with OES ex: IBM websphere portal Q:  How do we enforce Seperation of Duties (SoD) rules using OES (also how does that integrate with a product like OIA) ? A:  A product like OIM or OIA can be used to set up and govern SoD policies. OES enforces these policies at run time. Role mapping policies in OES can assign roles dynamically to users under certain conditions. So this makes it simple to enforce SoD policies inside an application at runtime. Q:  Our web application has objects like buttons, text fields, drop down lists etc. is there any ”autodiscovery” capability that allows me to use/see those web page objects so you can start building policies over those objects? or how does it work? A:  There ae few different options with OES. When you build an app, and make authorization calls with the app in the test environment, you can put OES in discovery mode and have OES register those authorization calls and decisions. Instead of doing  this after the fact, an application like Oracle iFlex has built-in UI controls where when the app is running, a script can intercept authorization calls and migrate those over to OES. And in Oracle ADF, a lot of resources are protected so pages, task flows and other resources be registered without OES knowing about them. Q: Does current Oracle Fusion application use OES ? The documentation does not seem to indicate it. A:  The current version of Fusion Apps is using a preview version of OES. Soon it will be repalced with OES 11g.  Q: Can OES secure mobile apps? A: Absolutely. Nowadays users are bringing their own devices such as a a smartphone or tablet to work. With the Oracle IDM platform, we can tie identity context into the access management stack. With OES we can make use of context to enforce authorization for users accessing apps from mobile devices. For example: we can take into account different elements like authentication scheme, location, device type etc and tie all that information into an authorization decision.  Q:  Does Oracle Entitlements Server (OES) have an ESAPI implementation? A:  OES is an authorization solution. ESAPI/OWASP is something we include in our platform security solution for all oracle products, not specifically in OES Q:  ESAPI has an authorization API. Can I use that API to access OES? A:  If the API supports an interface / sspi model that can be configured to invoke an external authz system through some mechanism then yes

    Read the article

  • SSIS - Connect to Oracle on a 64-bit machine (Updated for SSIS 2008 R2)

    - by jorg
    We recently had a few customers where a connection to Oracle on a 64 bit machine was necessary. A quick search on the internet showed that this could be a big problem. I found all kind of blog and forum posts of developers complaining about this. A lot of developers will recognize the following error message: Test connection failed because of an error in initializing provider. Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed. After a lot of searching, trying and debugging I think I found the right way to do it! Problems Because BIDS is a 32 bit application, as well on 32 as on 64 bit machines, it cannot see the 64 bit driver for Oracle. Because of this, connecting to Oracle from BIDS on a 64 bit machine will never work when you install the 64 bit Oracle client. Another problem is the "Microsoft Provider for Oracle", this driver only exists in a 32 bit version and Microsoft has no plans to create a 64 bit one in the near future. The last problem I know of is in the Oracle client itself, it seems that a connection will never work with the instant client, so always use the full client. There are also a lot of problems with the 10G client, one of it is the fact that this driver can't handle the "(x86)" in the path of SQL Server. So using the 10G client is no option! Solution Download the Oracle 11G full client. Install the 32 AND the 64 bit version of the 11G full client (Installation Type: Administrator) and reboot the server afterwards. The 32 bit version is needed for development from BIDS with is 32 bit, the 64 bit version is needed for production with the SQLAgent, which is 64 bit. Configure the Oracle clients (both 32 and 64 bits) by editing  the files tnsnames.ora and sqlnet.ora. Try to do this with an Oracle DBA or, even better, let him/her do this. Use the "Oracle provider for OLE DB" from SSIS, don't use the "Microsoft Provider for Oracle" because a 64 bit version of it does not exist. Schedule your packages with the SQLAgent. Background information Visual Studio (BI Dev Studio)is a 32bit application. SQL Server Management Studio is a 32bit application. dtexecui.exe is a 32bit application. dtexec.exe has both 32bit and 64bit versions. There are x64 and x86 versions of the Oracle provider available. SQLAgent is a 64bit process. My advice to BI consultants is to get an Oracle DBA or professional for the installation and configuration of the 2 full clients (32 and 64 bit). Tell the DBA to download the biggest client available, this way you are sure that they pick the right one ;-) Testing if the clients have been installed and configured in the right way can be done with Windows ODBC Data Source Administrator: Start... Programs... Administrative tools... Data Sources (ODBC) ADITIONAL STEPS FOR SSIS 2008 R2 It seems that, unfortunately, some additional steps are necessary for SQL Server 2008 R2 installations: 1. Open REGEDIT (Start… Run… REGEDIT) on the server and search for the following entry (for the 32 bits driver): HKEY_LOCAL_MACHINE\Software\Microsoft\MSDTC\MTxOCI Make sure the following values are entered: 2. Next, search for (for the 64 bits driver): HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\MSDTC\MTxOCI Make sure the same values as above are entered. 3. Reboot your server.

    Read the article

  • Launching Ops Center 12c

    - by user12601629
    Oracle Enterprise Manager Ops Center 12c is most ambitious version of the Ops Center tooling that we've ever released. I think that make it appropriate that we launched it in grand style! When it became clear we were going to be complete with the 12c final release about this time of year, the marketing team proposed that we roll the launch of 12c into Oracle OpenWorld Tokyo.  I thought that sounded like a fine idea!  You see, I have always loved Japan.  I even studied a bit of Japanese language back in school. OpenWorld Tokyo was an outstanding even this year.  It was held in Roppongi, one of the most stylish districts in Tokyo. And, to make things even better, the Sakura (cherry blossoms) were blooming.  If you've never been in Japan for cherry blossom season, it's a must see!  Here are a couple of pics for you. Here is a picture from Roppongi, near the conference.  Here's a picture near the Imperial Palace.  A couple of friends from the local sales team took me here before my flight out. So, now back to the product launch! We choose to launch the product in John Fowler's "Engineered Systems" keynote address.  It made perfect sense because of the close ties of Ops Center to the Systems portfolio of products.  It was a packed house for the keynote.  Here's a picture I took just before we started -- there were also hundreds more people in "overflow" rooms in other parts of the venue. Here's a picture of me on stage during the launch. While there are countless new features in Ops Center 12c that customers will love, I had to limit myself to discussing just three. Mission Critical Clouds Solaris 11 Engineered Systems So, what does Mission Critical Cloud mean?  It means we've expanded EM's cloud capabilities in a couple of key areas. First, we've expanded the "self service provisioning" capabilities we have to include SPARC -- not just x86.  Now you can build clouds of Solaris Zones with ease!  Second, we've much more deeply integrated high-end storage and network management into the cloud layers.  These may our IaaS story is now much more powerful! For Solaris 11, we didn't simply port our monitoring agent to S11.  That would have been easy, but also boring! We support S11 deeply.  Full access to the power of the IPS packaging system, the new virtualized networking stack, new Zones features, the Auto Install framework.  If you're ready to try Solaris 11 then Ops Center is ready for you. Last is on the area of Engineered Systems.  These combinations of hardware and software are fast and powerful. However, we're also on a mission to make them ever easier to manage.  We've made major strides with Ops Center 12c. Manage these systems as racks, not individual components.  The new capabilities for the new engineered systems like Exalogic and SPARC SuperCluster and striking. You can read more here: Oracle Unveils Oracle Enterprise Manager Ops Center 12c So, I'll wrap this up with one final bit of fun. One of my friends from the Oracle marketing department found a super cool place to get dinner.  It's a restaurant called Gonpachi. It turns out this is the place that inspired the scene in the Quentin Taratino movie Kill Bill where Uma Thurman fights 88 Ninjas.  Here is a picture I snapped while we were there. It was surely a good time. Check it out next time you're in Tokyo.

    Read the article

  • Oracle EMEA News Digest - May 2014

    - by Steve Walker
    Systems Oracle introduced a technology preview of an OpenStack® distribution that allows Oracle Linux and Oracle VM users to work with the open source cloud software. This provides customers with additional choices and interoperability while taking advantage of the efficiency, performance, scalability, and security of Oracle Linux and Oracle VM. The distribution is delivered as part of the Oracle Linux and Oracle VM Premier Support offerings, at no additional cost. Oracle plans to work further with the OpenStack community to develop and enhance its enterprise-class capabilities to meet customer demands. Also in the Open Source arena, Oracle announced the general availability of MySQL Fabric. MySQL Fabric provides an integrated system that makes it simpler to manage groups of MySQL databases. It delivers both high availability - via failure detection and failover - and scalability through automated data sharding. Oracle Database, Middleware and Technology The company made two announcements for Oracle Tuxedo, the #1 application server for C, C++, COBOL and Java deployments in private cloud or traditional data center environments. With enhanced management and monitoring features and tighter integration with Oracle technologies, the latest release of Oracle Tuxedo 12c enables organizations to dramatically increase application throughput, while reducing total cost of ownership and time to market for new application development and deployment. Oracle also introduced the latest release of its mainframe application rehosting platform, Oracle Tuxedo ART 12c, to help organizations speed up migration projects and accelerate the adoption of the new environment by current IT staff. It enables organizations to accelerate the rehosting of IBM mainframe applications and greatly enhance management and supportability of the rehosted applications while reducing costs and risk. Applications According to new Oracle studies, B2B and B2C commerce professionals find integrated, omni-channel customer experiences increasingly valuable to their organizations, and are continuing to invest in technologies and digital content strategies to facilitate them. The studies—one for B2B and one for B2C—surveyed e-commerce professionals in business and technology departments from around the world. Although the priorities, success metrics, and technology investments differed between the two groups, customer acquisition and retention emerged as common themes across B2B and B2C. Growing market share and enhancing customer experience are cited as top investment areas for all e-commerce professionals. In product news, Oracle announced the latest release of Oracle Business Intelligence (BI) Applications (version 11.1.1.8.1, in case anyone asks). It includes prebuilt connectors between Oracle Procurement and Spend Analytics and Oracle’s JD Edwards. Additionally, a new Oracle Human Resources Analytics module for developing and maintaining a skilled workforce has been introduced. In use at more than 4,000 companies worldwide, Oracle BI Applications support leading enterprise applications, including Oracle E-Business Suite, Oracle’s PeopleSoft, Oracle's Siebel CRM, Oracle’s JD Edwards EnterpriseOne offering high-performing analytics at a lower cost. Industries For the Communications Industry, Oracle has launched a new release of the Oracle Communications Core Session Manager. This gives CSPs a new way to design, deploy and manage complex networking services and embrace next-generation technology, It provides them with an immediate entry point for  network function virtualization (NFV) efforts, allowing them to realize immediate benefits associated with network virtualization – including increased service agility and improved network resource sharing. And for the Utilities Industry, Oracle is releasing solutions with new business features and enhanced technical architecture that help position utilities for success now and into the future. Oracle has provided new releases for its customer information system,  meter data management system, customer self-service solution and mobile workforce management solution.

    Read the article

  • Oracle Enterprise Manager Ops Center 12c Update 1 is available now

    - by Anand Akela
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Following the announcement of Oracle Enterprise Manager Ops Center 12c on April 4th, we are happy to announce the release of Oracle Enterprise Manager Ops Center 12c update 1. This is a bundled patch release for Oracle Enterprise Manager Ops Center.  Here are the key features of the Oracle Enterprise Manager Ops Center 12c update 1 : Oracle VM SPARC Server Pool HA Policy  Automatically Upgrade from Ops Center 11g update 3 and Ops Center 12c  Oracle Linux 5.8 and 6.x Support  Oracle VM SPARC IaaS (Virtual Datacenters) WANBoot Improvements with OBP Handling Enhancements SPARC SuperCluster Support Stability fixes This new release contains significant enhancements in the update provisioning, bare metal OS provisioning, shared storage management, cloud/virtual datacenter, and networking management sections of the product.  With this update, customers can achieve better handling of ASR faults, add networks and storage to virtual guests more easily, understand IPMP and VLAN configurations better, get a more robust LDAP integration, get  virtualization aware firmware patching, and observe improved product performance across the board.  Customers can now accelerate Oracle VM SPARC and T4 deployments into production . Oracle Enterprise Manager Ops Center 11g and Ops Center 12c customers will now notice the availability of new product update under the Administration tab within the  Browser User Interface (BUI) .  Upgrade process is explained in detail within the Ops Center Administration Guide under “Chapter 10: Upgrading”.  Please be sure to read over that chapter and the Release Notes before upgrading.  During the week of July 9th,  the full download of the product will be available from the Oracle Enterprise Manager Ops Center download website.  Based on the customer feedback, we have changed the updates to include the entire product. Customers no longer need to install Ops Center 12c and then upgrade to the update 1 release.  The can simply install Ops Center 12c update 1 directly.  Here are some of the resources that can help you learn more about the Oracle Enterprise Manager Ops Center and the new update 1. Oracle Enterprise Manager Ops Center OTN site Bi-Monthly Product Demos Oracle Enterprise Manager Ops Center Forum Oracle Enterprise Manager Ops Center MOS Community Watch the recording of Oracle Enterprise Manager 12c launch webcast by clicking the following banner. Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

    Read the article

  • Simple MVVM Walkthrough – Refactored

    - by Sean Feldman
    JR has put together a good introduction post into MVVM pattern. I love kick start examples that serve the purpose well. And even more than that I love examples that also can pass the real world projects check. So I took the sample code and refactored it slightly for a few aspects that a lot of developers might raise a brow. Michael has mentioned model (entity) visibility from view. I agree on that. A few other items that don’t settle are using property names as string (magical strings) and Saver class internal casting of a parameter (custom code for each Saver command). Fixing a property names usage is a straight forward exercise – leverage expressions. Something simple like this would do the initial job: class PropertyOf<T> { public static string Resolve(Expression<Func<T, object>> expression) { var member = expression.Body as MemberExpression; return member.Member.Name; } } With this, refactoring of properties names becomes an easy task, with confidence that an old property name string will not get left behind. An updated Invoice would look like this: public class Invoice : INotifyPropertyChanged { private int id; private string receiver; public event PropertyChangedEventHandler PropertyChanged; private void OnPropertyChanged(string propertyName) { if (PropertyChanged != null) { PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); } } public int Id { get { return id; } set { if (id != value) { id = value; OnPropertyChanged(PropertyOf<Invoice>.Resolve(x => x.Id)); } } } public string Receiver { get { return receiver; } set { receiver = value; OnPropertyChanged(PropertyOf<Invoice>.Resolve(x => x.Receiver)); } } } For the saver, I decided to change it a little so now it becomes a “view-model agnostic” command, one that can be used for multiple commands/view-models. Updated Saver code now accepts an action at construction time and executes that action. No more black magic internal class Command : ICommand { private readonly Action executeAction; public Command(Action executeAction) { this.executeAction = executeAction; } public bool CanExecute(object parameter) { return true; } public event EventHandler CanExecuteChanged; public void Execute(object parameter) { // no more black magic executeAction(); } } Change in InvoiceViewModel is instantiation of Saver command and execution action for the specific command. public ICommand SaveCommand { get { if (saveCommand == null) saveCommand = new Command(ExecuteAction); return saveCommand; } set { saveCommand = value; } } private void ExecuteAction() { DisplayMessage = string.Format("Thanks for creating invoice: {0} {1}", Invoice.Id, Invoice.Receiver); } This way internal knowledge of InvoiceViewModel remains in InvoiceViewModel and Command (ex-Saver) is view-model agnostic. Now the sample is not only a good introduction, but also has some practicality in it. My 5 cents on the subject. Sample code MvvmSimple2.zip

    Read the article

  • .NET development on a Retina MacBook Pro with Windows 8

    - by Jeff
    I remember sitting in Building 5 at Microsoft with some of my coworkers, when one of them came in with a shiny new 11” MacBook Air. It was nearly two years ago, and we found it pretty odd that the OEM’s building Windows machines sucked at industrial design in a way that defied logic. While Dell and HP were in a race to the bottom building commodity crap, Apple was staying out of the low-end market completely, and focusing on better design. In the process, they managed to build machines people actually wanted, and maintain an insanely high margin in the process. I stopped buying the commodity crap and custom builds in 2006, when Apple went Intel. As a .NET guy, I was still in it for Microsoft’s stack of development tools, which I found awesome, but had back to back crappy laptops from HP and Dell. After that original 15” MacBook Pro, I also had a Mac Pro tower (that I sold after three years for $1,500!), a 27” iMac, and my favorite, a 17” MacBook Pro (the unibody style) with an SSD added from OWC. The 17” was a little much to carry around because it was heavy, but it sure was nice getting as much as eight hours of battery life, and the screen was amazing. When the rumors started about a 15” model with a “retina” screen inspired by the Air, I made up my mind I wanted one, and ordered it the day it came out. I sold my 17”, after three years, for $750 to a friend who is really enjoying it. I got the base model with the upgrade to 16 gigs of RAM. It feels solid for being so thin, and if you’ve used the third generation iPad or the newer iPhone, you’ll be just as thrilled with the screen resolution. I’m typically getting just over six hours of battery life while running a VM, but Parallels 8 allegedly makes some power improvements, so we’ll see what happens. (It was just released today.) The nice thing about VM’s are that you can run more than one at a time. Primarily I run the Windows 8 VM with four cores (the laptop is quad-core, but has 8 logical cores due to hyperthreading or whatever Intel calls it) and 8 gigs of RAM. I also have a Windows Server 2008 R2 VM I spin up when I need to test stuff in a “real” server environment, and I give it two cores and 4 gigs of RAM. The Windows 8 VM spins up in about 8 seconds. Visual Studio 2012 takes a few more seconds, but count part of that as the “ReSharper tax” as it does its startup magic. The real beauty, the thing I looked most forward to, is that beautifully crisp C# text. Consolas has never looked as good as it does at 10pt. as it does on this display. You know how it looks great at 80pt. when conference speakers demo stuff on a projector? Think that sharpness, only tiny. It’s just gorgeous. Beyond that, everything is just so responsive and fast. Builds of large projects happen in seconds, hundreds of unit tests run in seconds… you just don’t spend a lot of time waiting for stuff. It’s kind of painful to go back to my 27” iMac (which would be better if I put an SSD in it before its third birthday). Are there negatives? A few minor issues, yes. As is the case with OS X, not everything scales right. You’ll see some weirdness at times with splash screens and icons and such. Chrome’s text rendering (in Windows) is apparently not aware of how to deal with higher DPI’s, so text is fuzzy (the OS X version is super sharp, however). You’ll also have to do some fiddling with keyboard settings to use the Windows 8 keyboard shortcuts. Overall, it’s as close to a no-compromise development experience as I’ve ever had. I’m not even going to bother with Boot Camp because the VM route already exceeds my expectations. You definitely get what you pay for. If this one also lasts three years and I can turn around and sell it, it’s worth it for something I use every day.

    Read the article

  • SQL Authority News – FalafelCON 2014: 2 days with the Best Developers in the World

    - by Pinal Dave
    I love presenting at various forums on various technologies. I am extremely excited that I got invited to speak at Falafel Conference 2014 in San Francisco. I will present two technology sessions on SQL Server. If you are into web development or if you just want to attend a conference with the best of the industry speakers, this may be the right conference for you. What set apart this conference from other conference is technology presented as well as speakers. Usually one has to attend very expensive and high scale event when they have to hear good speakers. At this conference, you will find quite a many industry legends are available to present on the bleeding edge technology. Here are few of the reasons why I believe you should attend this conference: Choose from four tracks covering Web, Mobile development and testing, Sitefinity, and Automated Testing, or attend sessions from all four! Learn from the best developers and testers in the business in an intimate setting. Surround yourself with your peers and the opportunity to network Learn about the latest platforms and technologies including Kendo UI, AngularJS, ASP.NET MVC, WebAPI, and more! Here are the details for the sessions which I am going to present at Falafel Conference. Secrets of SQL Server: Database Worst Practices Abstract: Chances are you have heard, or even uttered, this expression. This demo-oriented session will show many examples where database professionals were dumbfounded by their own mistakes, and could even bring back memories of your own early DBA days. The goal of this session is to expose the small details that can be dangerous to the production environment and SQL Server as a whole, as well as talk about worst practices and how to avoid them. Shedding light on some of these perils and the tricks to avoid them may even save your current job. After attending this session, Developers will only need 60 seconds to improve performance of their database server in their SharePoint implementation. We will have a quiz during the session to keep the conversation alive. Developers will walk out with scripts and knowledge that can be applied to their servers, immediately post the session. Additionally, all attendees of the session will have access to learning material presented in the session. The Unsung Hero Abstract: Slow Running Queries are the most common problem that developers face while working with SQL Server. While it is easy to blame the SQL Server for unsatisfactory performance, however the issue often persists with the way queries have been written, and how Indexes has been set up. The session will focus on the ways of identifying problems that slow down SQL Server, and Indexing tricks to fix them. Developers will walk out with scripts and knowledge that can be applied to their servers, immediately post the session. Register Now! I have learned from the Falafel Team that they are running out of tickets and soon they will close the registration.  For next 10 days the price for the registration is only USD 149. Trust me, you can’t get such a world class training and networking opportunity at such a low price. Click to Register Here! Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL

    Read the article

  • Session Report - Modern Software Development Anti-Patterns

    - by Janice J. Heiss
    In this standing-room-only session, building upon his 2011 JavaOne Rock Star “Diabolical Developer” session, Martijn Verburg, this time along with Ben Evans, identified and explored common “anti-patterns” – ways of doing things that keep developers from doing their best work. They emphasized the importance of social interaction and team communication, along with identifying certain psychological pitfalls that lead developers astray. Their emphasis was less on technical coding errors and more how to function well and to keep one’s focus on what really matters. They are the authors of the highly regarded The Well-Grounded Java Developer and are both movers and shakers in the London JUG community and on the Java Community Process. The large room was packed as they gave a fast-moving, witty presentation with lots of laughs and personal anecdotes. Below are a few of the anti-patterns they discussed.Anti-Pattern One: Conference-Driven DeliveryThe theme here is the belief that “Real pros hack code and write their slides minutes before their talks.” Their response to this anti-pattern is an expression popular in the military – PPPPPP, which stands for, “Proper preparation prevents piss-poor performance.”“Communication is very important – probably more important than the code you write,” claimed Verburg. “The more you speak in front of large groups of people the easier it gets, but it’s always important to do dry runs, to present to smaller groups. And important to be members of user groups where you can give presentations. It’s a great place to practice speaking skills; to gain new skills; get new contacts, to network.”They encouraged attendees to record themselves and listen to themselves giving a presentation. They advised them to start with a spouse or friends if need be. Learning to communicate to a group, they argued, is essential to being a successful developer. The emphasis here is that software development is a team activity and good, clear, accessible communication is essential to the functioning of software teams. Anti-Pattern Two: Mortgage-Driven Development The main theme here was that, in a period of worldwide recession and economic stagnation, people are concerned about keeping their jobs. So there is a tendency for developers to treat knowledge as power and not share what they know about their systems with their colleagues, so when it comes time to fix a problem in production, they will be the only one who knows how to fix it – and will have made themselves an indispensable cog in a machine so you cannot be fired. So developers avoid documentation at all costs, or if documentation is required, put it on a USB chip and lock it in a lock box. As in the first anti-pattern, the idea here is that communicating well with your colleagues is essential and documentation is a key part of this. Social interactions are essential. Both Verburg and Evans insisted that increasingly, year by year, successful software development is more about communication than the technical aspects of the craft. Developers who understand this are the ones who will have the most success. Anti-Pattern Three: Distracted by Shiny – Always Use the Latest Technology to Stay AheadThe temptation here is to pick out some obscure framework, try a bit of Scala, HTML5, and Clojure, and always use the latest technology and upgrade to the latest point release of everything. Don’t worry if something works poorly because you are ahead of the curve. Verburg and Evans insisted that there need to be sound reasons for everything a developer does. Developers should not bring in something simply because for some reason they just feel like it or because it’s new. They recommended a site run by a developer named Matt Raible with excellent comparison spread sheets regarding Web frameworks and other apps. They praised it as a useful tool to help developers in their decision-making processes. They pointed out that good developers sometimes make bad choices out of boredom, to add shiny things to their CV, out of frustration with existing processes, or just from a lack of understanding. They pointed out that some code may stay in a business system for 15 or 20 years, but not all code is created equal and some may change after 3 or 6 months. Developers need to know where the code they are contributing fits in. What is its likely lifespan? Anti-Pattern Four: Design-Driven Design The anti-pattern: If you want to impress your colleagues and bosses, use design patents left, right, and center – MVC, Session Facades, SOA, etc. Or the UML modeling suite from IBM, back in the day… Generate super fast code. And the more jargon you can talk when in the vicinity of the manager the better.Verburg shared a true story about a time when he was interviewing a guy for a job and asked him what his previous work was. The interviewee said that he essentially took patterns and uses an approved book of Enterprise Architecture Patterns and applied them. Verburg was dumbstruck that someone could have a job in which they took patterns from a book and applied them. He pointed out that the idea that design is a separate activity is simply wrong. He repeated a saying that he uses, “You should pay your junior developers for the lines of code they write and the things they add; you should pay your senior developers for what they take away.”He explained that by encouraging people to take things away, the code base gets simpler and reflects the actual business use cases developers are trying to solve, as opposed to the framework that is being imposed. He told another true story about a project to decommission a very long system. 98% of the code was decommissioned and people got a nice bonus. But the 2% remained on the mainframe so the 98% reduction in code resulted in zero reduction in costs, because the entire mainframe was needed to run the 2% that was left. There is an incentive to get rid of source code and subsystems when they are no longer needed. The session continued with several more anti-patterns that were equally insightful.

    Read the article

  • What You Can Learn from the NFL Referee Lockout

    - by Christina McKeon
    American football is a lot like religion. The fans are devoted followers that take brand loyalty to a whole new level. These fans that worship their teams each week showed that they are powerful customers whose voice has an impact. Yesterday, these fans proved that their opinion could force the hand of a large and powerful institution. With a three-month NFL referee lockout that seemed like it was nowhere close to resolution, the Green Bay Packers and the Seattle Seahawks competed last Monday night. For those of you that might have been out of the news cycle the past few days, Green Bay lost the game due to a controversial call that many experts and analysts agree should have resulted in Green Bay winning the game. Outrage ensued. The NFL had pulled replacement referees from the high school ranks, and these replacements did not have the knowledge and experience to handle high intensity NFL games. Fans protested about their customer experience. Their anger-filled rants were heard in social media, in the headlines of newspapers, on radio, and on national TV. Suddenly, the NFL was moved to reach an agreement with the referees. That agreement was reached late in the night on Wednesday with many believing that the referees had the upper hand forcing the owners into submission. Some might argue that the referees benefited, not the fans. Since the fans wanted qualified and competent referees, I would say the fans did benefit. The referees are scheduled to return to the field this Sunday, so the fans got what they wanted. What can you learn from this negative customer experience? Customers are in control. NFL owners thought they were controlling this situation with the upper hand over referees. The owners figured out they weren’t in control when their fans reacted negatively. Customers can make or break you more now than ever before, which is why it is more important to connect with them, engage them in a personal manner, and create rewarding relationships. Protect your brand. Whether knowingly or unknowingly, the NFL put their brand and each team’s brand at risk with replacement referees. Think about each business decision you make, and how it may impact your brand at different points in time. A decision that results in a gain today could result in a larger loss down the road. Customer experience matters. The NFL likely foresaw declining revenues in ticket sales, merchandising, advertising, and other areas if the lockout continued. While fans primarily spoke with their minds in the days following the Green Bay debacle, their wallets would be the next things to speak. Customer experience directly affects your success and is one of the few areas where you can differentiate your business. What would you do if your brand got such negative attention? Would you be prepared to navigate such stormy waters? Would you be able to prevent such a fiasco? If you don’t have a good answer to these questions, consider joining us October 3-5, 2012 at the Oracle Customer Experience Summit in San Francisco. You’ll have the opportunity to learn even more about customer experience from industry experts such as best-selling author Seth Godin, Paul Hagen and Kerry Bodine from Forrester Research, Inc., George Kembel from the Stanford d.School, Bruce Temkin of The Temkin Group, and Gene Alvarez from Gartner Inc.. There will also be plenty of your peers and customer experience experts available for networking and discussions.

    Read the article

  • The Raspberry Pi JavaFX In-Car System (Part 3)

    - by speakjava
    Ras Pi car pt3 Having established communication between a laptop and the ELM327 it's now time to bring in the Raspberry Pi. One of the nice things about the Raspberry Pi is the simplicity of it's power supply.  All we need is 5V at about 700mA, which in a car is as simple as using a USB cigarette lighter adapter (which is handily rated at 1A).  My car has two cigarette lighter sockets (despite being specified with the non-smoking package and therefore no actual cigarette lighter): one in the centre console and one in the rear load area.  This was convenient as my idea is to mount the Raspberry Pi in the back to minimise the disruption to the very clean design of the Audi interior. The first task was to get the Raspberry Pi to communicate using Wi-Fi with the ELM 327.  Initially I tried a cheap Wi-Fi dongle from Amazon, but I could not get this working with my home Wi-Fi network since it just would not handle the WPA security no matter what I did.  I upgraded to a Wi Pi from Farnell and this works very well. The ELM327 uses Ad-Hoc networking, which is point to point communication.  Rather than using a wireless router each connecting device has its own assigned IP address (which needs to be on the same subnet) and uses the same ESSID.  The settings of the ELM327 are fixed to an IP address of 192.168.0.10 and useing the ESSID, "Wifi327".  To configure Raspbian Linux to use these settings we need to modify the /etc/network/interfaces file.  After some searching of the web and a few false starts here's the settings I came up with: auto lo eth0 wlan0 iface lo inet loopback iface eth0 inet static     address 10.0.0.13     gateway 10.0.0.254     netmask 255.255.255.0 iface wlan0 inet static     address 192.168.0.1     netmask 255.255.255.0     wireless-essid Wifi327     wireless-mode ad-ho0 After rebooting, iwconfig wlan0 reported that the Wi-Fi settings were correct.  However, ifconfig showed no assigned IP address.  If I configured the IP address manually using ifconfig wlan0 192.168.0.1 netmask 255.255.255.0 then everything was fine and I was able to happily ping the IP address of the ELM327.  I tried numerous variations on the interfaces file, but nothing I did would get me an IP address on wlan0 when the machine booted.  Eventually I decided that this was a pointless thing to spend more time on and so I put a script in /etc/init.d and registered it with update-rc.d.  All the script does (currently) is execute the ifconfig line and now, having installed the telnet package I am able to telnet to the ELM327 via the Raspberry Pi.  Not nice, but it works. Here's a picture of the Raspberry Pi in the car for testing In the next part we'll look at running the Java code on the Raspberry Pi to collect data from the car systems.

    Read the article

  • UPOS RFIDScanner data format

    - by Robert Snyder
    A lot of work that I do currently is based in the OPOS/UPOS world. My company has a device that can read 13.56Mhz tags (RFID), Smart Cards, and Mag Stripe cards. Up until somewhat recently I have only been working with RFID for a very specific scenario. That was to read UltraLight C and Desfire cards. These cards were all setup very specifically so that I could take the data read from those cards and force it into a MSR track2 format. The past couple of weeks, however, I have been working on reading RFID credit cards (since I have a Visa card I've been using mine), and Smart Card credit cards. (The visa card I have has both) In learning how to communicate with SmartCard and reading ISO7816 and EMVCO documents I became a little more familiar with how info is stored. But now I have a question regarding UPOS. The RFID data on my Visa is stored (and read) very similar to how the data is stored and read from the Smart Card on my Visa. Cool. Well in the UPOS spec for SmartCardRW the ReadData method returns a byte array. That's cool, I can just return all that data and then parse it as my heart desires. The RFID though has a LinkedList of Tags. Well this makes sense in terms of my Visa card (reminds me of a question I have in regards to SmartCard, but that is for another question) but what about ULC and Desfire, or for that matter any Mifare card. Pages, Files, Purses don't exactly fit the Tag profile. For instance lets just say I read pages 4-12 on my ULC card. Each page I read is 4 bytes long. Does this mean I have 9 tags in my LinkedList? Is my Tag id the page number? Or then how does that translate to Desfire? I open application 123456 and read file 1 and file 2, Do I have 2 tags? and if so what is my tag id? At least with my Visa I think that I have to use the Tag id (ex 5F24 for my expiration date) and value of {0x15, 0x10, 0x31} Part of me says yes..that makes sense. Another part of me says, "well if that is the case then why doesn't SmartCardRW have Tags?" So that is my question. How do I format my data from those different types of media? or is that the job of my Control Object (the application)? Is so how does it know? The only protocols I have are: // Summary: // Enumerates the available predefined RFID tag protocols the device supports. [Flags] public enum RFIDProtocols { EpcClass0 = 1, RFIDSdt0Plus = 2, EpcClass1 = 4, EpcClass1Gen2 = 8, EpcClass2 = 16, Iso14443A = 4096, Iso14443B = 8192, Iso15693 = 12288, Iso180006B = 16384, Other = 16777216, All = 1073741824, } If I use that well all of my cards that I have are all Iso14443A. I use the ATQA and the SAK to know what type of card I really have. There is no RFID property that lets me specify that. So I'm lost.

    Read the article

  • ArchBeat Link-o-Rama Top 10 for November 2012

    - by Bob Rhubart
    Every day ArchBeat searches the web for content created by and for community members, and then shares that content via social media. Here's the list of the Top 10 most popular items posted on the OTN ArchBeat Facebook Page for November 2012. One-Stop Shop for Oracle Webcasts Webcasts can be a great way to get information about Oracle products without having to go cross-eyed reading yet another document off your computer screen. Oracle's new Webcast Center offers selectable filtering to make it easy to get to the information you want. Yes, you have to register to gain access, but that process is quick, and with over 200 webcasts to choose from you know you'll find useful content. OAM/OVD JVM Tuning Vinay from the Oracle Fusion Middleware Architecture Group (otherwise known as the A-Team) shares a process for analyzing and improving performance in Oracle Virtual Directory and Oracle Access Manager. White Paper: Oracle Exalogic Elastic Cloud: Advanced I/O Virtualization Architecture for Consolidating High-Performance Workloads This new white paper by Adam Hawley (with contributions from Yoav Eilat) describes in great detail the incorporation into Oracle Exalogic of virtualized InfiniBand I/O interconnects using Single Root I/O Virtualization (SR-IOV) technology. Architected Systems: "If you don't develop an architecture, you will get one anyway..." "Can you build a system without taking care of architecture?," asks Manuel Ricca. "You certainly can. But inevitably the system will be unbalanced, neglecting the interests of key stakeholders, and problems will soon emerge." Backup and Recovery of an Exalogic vServer via rsync "On Exalogic a vServer will consist of a number of resources from the underlying machine," says the man known only as Donald. "These resources include compute power, networking and storage. In order to recover a vServer from a failure in the underlying rack all of these components have to be thoughts about. This article only discusses the backup and recovery strategies that apply to the storage system of a vServer." This Week on the OTN Architect Community Home Page Make time to check out this week's features on the OTN Solution Architect Homepage, including: SOA Practitioner Guide: Identifying and Discovering Services Technical article by Yuli Vasiliev on Setting Up, Configuring, and Using an Oracle WebLogic Server Cluster Podcast: Are You Future Proof? Clustering ODI11g for High-Availability Part 1: Introduction and Architecture | Richard Yeardley "JEE agents can be deployed alongside, or instead of, standalone agents," says Rittman Meade's Richard Yeardley. "But there is one key advantage in using JEE agents and WebLogic – when you deploy JEE agents as part of a WebLogic cluster they can be configured together to form a high availability cluster." Learn more in Yeardley's extensive post. OIM 11g : Multi-thread approach for writing custom scheduled job | Saravanan V S Saravanan shares insight and expertise relevant to "designing and developing an OIM schedule job that uses multi threaded approach for updating data in OIM using APIs." How to Create Virtual Directory in Weblogic Server | Zeeshan Baig Oracle ACE Zeeshan Baig shows you how in six easy steps. SOA Galore: New Books for Technical Eyes Only Shake up up your technical skills with this trio of new technical books from community members covering SOA and BPM. Thought for the Day "Humans are the best value in computers -- where else can you get a non-linear computer weighing only about 160lbs, having a billion binary decision elements, that can be mass-produced by unskilled labour?" — Anonymous Source: SoftwareQuotes.com

    Read the article

  • PASS summit 2013. We do not remember days. We remember moments.

    - by Maria Zakourdaev
      "Business or pleasure?" barked the security officer in the Charlotte International Airport. "I’m not sure, sir," I whimpered, immediately losing all courage. "I'm here for the database technologies summit called PASS”. "Sounds boring. Definitely a business trip." Boring?! He couldn’t have been more wrong. If he only knew about the countless meetings throughout the year where I waved my hands at my great boss and explained again and again how fantastic this summit is and how much I learned last year. One by one, the drops of water began eating away at the stone. He finally approved of my trip just to stop me from torturing him. Time moves as slow as a turtle when you are waiting for something. Time runs as fast as a cheetah when you are there. PASS has come...and passed. It’s been an amazing week. Enormous sqlenergy has filled the city, filled the convention center and the surrounding pubs and restaurants. There were awesome speakers, great content, and the chance to meet most inspiring database professionals from all over the world. Some sessions were unforgettable. Imagine a fully packed room with more than 500 people in awed silence, catching each and every one of Paul Randall's words. His tremendous energy and deep knowledge were truly thrilling. No words can describe Rob Farley's unique presentation style, captivating and engaging the audience. When the precious session minutes were over, I could tell that the many random puzzle pieces of information that his listeners knew had been suddenly combined into a clear, cohesive picture. I was amazed as always by Paul White's great sense of humor and his phenomenal ability to explain complicated concepts in a simple way. The keynote by the brilliant Dr. DeWitt from Microsoft in front of the full summit audience of 5000 deeply listening people was genuinely breathtaking. The entire conference throughout offered excellent speakers who inspired me to absorb the knowledge and use it when I got home. To my great surprise, I found that there are other people in this world who like replication as much I do. During the Birds of a Feather Luncheon, SQL Server MVP Ted Krueger was writing a script for replicating the food to other tables. I learned many things at PASS, and not all of them were about SQL. After three summits, this time I finally got the knack of networking. I actually went up and spoke to people, and believe me, that was not easy for an introvert. But this is what the summit is all about. Sqlpeople. They are the ones who make it such an exciting experience. I will be looking forward to the next year. Till then I have my notes and new ideas. How long was the summit? Thousands of unforgettable moments.

    Read the article

  • Accounts in Work Items after migration to TFS 2010 and to new domain

    - by Clara Oscura
    Lately I’ve been doing some tests on migrating our TFS 2008 installation to TFS 2010, coupled with a machine and domain change. One particular topic that was tricky is user accounts. We installed first a new machine with TFS 2010 and then migrated the projects in the old server. The work items were migrated with the projects. Great, but if I try to edit one of the old work items I cannot save it anymore because some fields contain old user names (ex. OLDDOMAIN\user) which are not known in the new domain (it should be NEWDOMAIN\user). The errors look like this: When I correct the ‘Assigned To’ field value, I get another error regarding another field: Before TFS 2010, we had TFSUsers power tool. It allow you to map an old user name to a new user name. This is not available anymore because WI fields with user accounts are now synchronized with AD display names changes (explained here). The correct way to go about this in TFS 2010 is to use TFSConfig Identities before adding the new domain accounts into the TFS groups (documented here). So, too late for us. I’ve found a (tedious) workaround to change those old account in work items in order to allow people to keep working with them. 1. Install TFS 2010 power tools 2. Export WIT from your project (VS | Tools | Process Editor | Work Item Types). Save the definition, for example: Original_MyProject_Task.xml 3. Copy the xml (NoReadOnly_MyProject_Task.xml) and edit it. From the field definition of ‘Activated By’, ‘Closed By’ and ‘Resolved By’, remove the following:        <WHENNOTCHANGED field="System.State">           <READONLY />         </WHENNOTCHANGED> 4. Import WIT in VS. Choose the new file (NoReadOnly_MyProject_Task.xml) and import it in MyProject 5. Open all tasks in Excel (flat list). Display the following columns: Asssigned To Activated By Closed By Resolved By Change the user accounts to the new ones (I usually sort each column alphabetically to make it easier). 6. Publish. If you get a conflict on a field, tough luck. You will have to manually choose “Local version” for each work item. I told you it was a tedious process. 7. Import original WIT (Original_MyProject_Task.xml) in MyProject. We only changed the WI definition so that we could change some fields. The original definition should be put back. And what about these other fields? Created By Authorized As These fields are not editable by definition (VS | Tools | Process Editor | Work Item Fields Explorer), even if they are not marked as read-only in the WIT. You can leave the old values. It doesn’t seem to matter to TFS. The other four fields are editable by definition, so only the WIT readonly rule prevents us from changing them. Technorati Tags: TFS,Team Foundation Server 2010,Work Item,Domain change

    Read the article

  • What's wrong with my wireless?

    - by dazzle
    I am having issues with my wireless connection. My connection is constantly disconnecting, then attempting to reconnect, reconnecting momentarily, then disconnecting etc. on times scales that range from seconds to minutes. In the meantime, needless to say I'm having significant packet loss. I'm running Ubuntu 14.04 64bit, updated and upgraded to today. Here is my card and driver: delta@sager:~$ lspci -vq | grep -i wireless -B 1 -A 5 04:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73) Subsystem: Intel Corporation Dual Band Wireless-AC 7260 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at f7d00000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: iwlwifi Here is my kernel: delta@sager:~$ uname -r 3.13.0-34-generic None of the other machines on my home network are having these issues. Windows Vista is networking without issue for goodness sake ;-) Here is a small clipping from the output of dmesg. As you can see, I am getting a cfg80211 message of some sort over and over again (FYI, I've replaced my MAC address with a series of dashes, so anytime there is a ---------------, that was where the MAC address was: [ 1881.739161] wlan1: authenticate with --------------- [ 1881.741561] wlan1: send auth to --------------- (try 1/3) [ 1881.743440] wlan1: authenticated [ 1881.746027] wlan1: associate with --------------- (try 1/3) [ 1881.749244] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1881.754727] wlan1: associated [ 1881.754827] cfg80211: Calling CRDA for country: US [ 1881.761552] cfg80211: Regulatory domain changed to country: US [ 1881.761559] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1881.761564] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1881.761568] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1881.761571] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761574] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761577] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1881.761580] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1881.761584] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1882.391038] cfg80211: Calling CRDA to update world regulatory domain [ 1882.396254] cfg80211: World regulatory domain updated: [ 1882.396260] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1882.396265] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396268] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396271] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1882.396274] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1882.396277] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.148252] wlan1: authenticate with --------------- [ 1886.150005] wlan1: send auth to --------------- (try 1/3) [ 1886.151807] wlan1: authenticated [ 1886.154847] wlan1: associate with --------------- (try 1/3) [ 1886.158147] wlan1: RX AssocResp from --------------- (capab=0x411 status=0 aid=4) [ 1886.163464] wlan1: associated [ 1886.163520] wlan1: Limiting TX power to 30 (30 - 0) dBm as advertised by --------------- [ 1886.163588] cfg80211: Calling CRDA for country: US [ 1886.170500] cfg80211: Regulatory domain changed to country: US [ 1886.170508] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1886.170513] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 1886.170517] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 1886.170520] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170523] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170526] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1886.170529] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 1886.170533] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm) [ 1887.200197] cfg80211: Calling CRDA to update world regulatory domain [ 1887.203655] cfg80211: World regulatory domain updated: [ 1887.203659] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 1887.203662] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203664] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203666] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 1887.203668] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 1887.203670] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) I've poked around on AskUbuntu, and have not found any adequate solutions; have also found similar threads that were left unanswered. Any advice/experience/threads I might be able to pull on would be greatly appreciated. In your opinion, is this a kernel issue, hardware issue, etc.? Thanks in advance. EDIT: chili, here's the output of iwconfig: delta@sager:~$ iwconfig wlan1 IEEE 802.11abg ESSID:"LANbeforetime" Mode:Managed Frequency:2.412 GHz Access Point: ----------- Bit Rate=48 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=44/70 Signal level=-66 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:80 Missed beacon:0 eth0 no wireless extensions. lo no wireless extensions.

    Read the article

  • USDM and Oracle Offer a New Part 11 Compliant Solution for Life Sciences

    - by Michael Snow
    Guest post today provided by Oracle partner, USDM  Regulated Content in WebCenterUSDM and Oracle offer a new Part 11 compliant solution for Life Sciences (White Paper) Life science customers now have the ability to take advantage of all of the benefits of Oracle’s WebCenter Content, a global leader in Enterprise Content Management.   For the past year, USDM has been developing best practice compliance solutions to meet regulated content management requirements for 21 CFR Part 11 in WebCenter Content. USDM has been an expert in ECM for life sciences since 1999 and in 2011, certified that WebCenter was a 21CFR Part 11 compliant content management platform (White Paper).  In addition, USDM has built Validation Accelerators Packs for WebCenter to enable life science organizations to quickly and cost effectively validate this world class solution.With the Part 11 certification, Oracle’s WebCenter now provides regulated life science organizations  the ability to manage REGULATORY content in WebCenter, as well as the ability to take advantage of ALL of the additional functionality of WebCenter, including  a complete, open, and integrated portfolio of portal, web experience management, content management and social networking technology.  Here are a few screen shot examples of Part 11 functionality included in the product: E-Sign, E-Sign Rendor, Meta Data History, Audit Trail Report, and Access Reporting. Gone are the days that life science companies have to spend millions of dollars a year to implement, maintain, and validate ECM systems that no longer meet the ever changing business and regulatory requirements.  Life science companies now have the ability to use WebCenter Content, an ECM system with a substantially lower cost of ownership and unsurpassed functionality.Oracle has been #1 in life sciences because of their ability to develop cost effective, easy-to-use, scalable solutions which help increase insight and efficiency to drive growth for their customers.  Adding a world class ECM solution to this product portfolio allows life science organizations the chance to get rid of costly ECM systems that no longer meet their needs and use WebCenter, part of the Oracle Fusion Technology stack, with their other leading enterprise applications.USDM provides:•    Expertise in Life Science ECM Business Processes•    Prebuilt Life Science Configuration in WebCenter •    Validation Accelerator Packs for WebCenterUSDM is very proud to support Oracle’s expanding commitment to Life Sciences…. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} For more information please contact:  [email protected] Oracle will be exhibiting at DIA 2012 in Philadelphia on June 25-27. Stop by our booth (#2825) to learn more about the advantages of a centralized ECM strategy and see the Oracle WebCenter Content solution, our 21 CFR Part 11 compliant content management platform.

    Read the article

  • Making AI jump on a spot effectively

    - by Pasquale Sada
    How to calculate, in 3D environment, the closest point, from which an AI character can jump onto a platform? Setup I have an initial velocity V(Vx,Vy,VZ) and a spot where the character stands still at S(Sx,Sy,Sz). What I'm trying to achieve is a successful jump on a spot E(Ex,Ey,Ez) where you have clicked on(only lower or higher spot, because I've in place a simple steering behavior for even terrains). There are no obstacles around. I've implemented a formula that can make him jump in a precise way on a spot but you need to declare an angle: the problem arise when the selected spot is straight above your head. It' pretty lame that the char hang there and can reach a thing that is 1cm above is head. I'll share the code I'm using: Vector3 dir = target - transform.position; // get target direction float h = dir.y; // get height difference dir.y = 0; // retain only the horizontal direction float dist = dir.magnitude ; // get horizontal distance float a = angle * Mathf.Deg2Rad; // convert angle to radians dir.y = dist * Mathf.Tan(a); // set dir to the elevation angle dist += h / Mathf.Tan(a); // correct for small height differences // calculate the velocity magnitude float vel = Mathf.Sqrt(dist * Physics.gravity.magnitude / Mathf.Sin(2 *a)); return vel * dir.normalized; Ended up using the lowest angle (20 degree) and checking for collision on the trajectory. If found any increase the angle. Here some code (to improve the code maybe must stop the check at the highest point of the curve): Vector3 BallisticVel(Vector3 target, float angle) { Vector3 dir = target - transform.position; // get target direction float h = dir.y; // get height difference dir.y = 0; // retain only the horizontal direction float dist = dir.magnitude ; // get horizontal distance float a = angle * Mathf.Deg2Rad; // convert angle to radians dir.y = dist * Mathf.Tan(a); // set dir to the elevation angle dist += h / Mathf.Tan(a); // correct for small height differences // calculate the velocity magnitude float vel = Mathf.Sqrt(dist * Physics.gravity.magnitude / Mathf.Sin(2 * a)); return vel * dir.normalized; } Vector3 TrajectoryPoint(Vector3 startingPosition, Vector3 startingVelocity, float n ) { float t = 1/60 ; // seconds per time step Vector3 stepVelocity = t * startingVelocity; // m/s Vector3 stepGravity = t * t * Physics.gravity; // m/s/s return startingPosition + n * stepVelocity + 0.5f * (n*n+n) * stepGravity; } bool CheckTrajectory(Vector3 startingPosition,Vector3 target, float angle_jump) { Debug.Log("checking"); if(angle_jump < 80f) { Debug.Log("if"); Vector3 startingVelocity = BallisticVel(target, angle_jump); for (int i = 0; i < 180; i++) { //Debug.Log(i); Vector3 trajectoryPosition = TrajectoryPoint( startingPosition, startingVelocity, i ); if(Physics.Raycast(trajectoryPosition,Vector3.forward,safeDistance)) { angle_jump += 10; break; // restart loop with the new angle } else continue; } return true; JumpVelocity = BallisticVel(target, angle_jump); } return false; }

    Read the article

  • Why won't my Broadcom BCM4312 LP-PHY work with the STA driver?

    - by Jackson Taylor
    I tried the steps here for a 4312: https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx Both of these: sudo modprobe -r b43 ssb wl sudo modprobe wl return: FATAL: Module wl not found. FATAL: Error running install command for wl (this one is only for the second one actually) I tried the broadcom-sta, didn't work. What's confusing is down below in the next steps for STA with internet access it says to use the bcmwl one. So I install that and it succeeds but with some errors: sudo apt-get install bcmwl-kernel-source Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: module-assistant Use 'apt-get autoremove' to remove it. The following NEW packages will be installed: bcmwl-kernel-source 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/1,181 kB of archives. After this operation, 3,609 kB of additional disk space will be used. Selecting previously unselected package bcmwl-kernel-source. (Reading database ... 168005 files and directories currently installed.) Unpacking bcmwl-kernel-source (from .../bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb) ... Setting up bcmwl-kernel-source (5.100.82.112+bdcom-0ubuntu3) ... Loading new bcmwl-5.100.82.112+bdcom DKMS files... Building only for 3.5.0-21-generic Building for architecture x86_64 Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. ERROR: Module b43 does not exist in /proc/modules ERROR: Module b43legacy does not exist in /proc/modules ERROR: Module ssb does not exist in /proc/modules ERROR: Module bcm43xx does not exist in /proc/modules ERROR: Module brcm80211 does not exist in /proc/modules ERROR: Module brcmfmac does not exist in /proc/modules ERROR: Module brcmsmac does not exist in /proc/modules ERROR: Module bcma does not exist in /proc/modules FATAL: Module wl not found. FATAL: Error running install command for wl update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.5.0-21-generic jtaylor991@jtaylor991-whiteHP:~$ sudo modprobe wl FATAL: Module wl not found. FATAL: Error running install command for wl Then I do the modprobe wl commands listed above and it gives the above listed errors. It didn't work with the broadcom-sta driver either. I installed the b43 ones but nothing happened, and I don't know why so those are still installed. firmware-b43legacy-installer, b43-fwcutter and firmware-b43-lpphy-installer (yes it is a LP-PHY) are currently installed. If I go into System Settings Software Sources Additional Drivers it says "Using Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source (proprietary) But bcmwl-kernel-source isn't installed. I could try again but I remember rebooting and it still said this. What's funny is it found wireless networks during the Ubuntu setup/installation, I don't remember if I got it to connect or not though. I think it kept asking for a password when I put it in (yes it was right I showed password and looked at it) so I just ignored it. But right now the Enable Wireless option in the top right is just gone, it's just Enable Networking and I'm on ethernet on this HP Pavilion dv4-1435dx right here. If I run rfkill list it shows: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no It was hard blocked at the beginning but unblocking it makes no change. Also it's a touch sensitive button, and it appears to be always orange no matter if it's enabled or not because when I touch it the hard blocked changes between yes and no in rfkill list. I think it was blue for a minute at one point. What is going on?!?! Help me! Lol, thanks for any and all of your time guys. Oh yeah this is Ubuntu 12.10 fresh install.

    Read the article

  • Styling ASP.NET MVC Error Messages

    - by MightyZot
    Originally posted on: http://geekswithblogs.net/MightyZot/archive/2013/11/11/styling-asp.net-mvc-error-messages.aspxOff the cuff, it may look like you’re stuck with the presentation of your error messages (model errors) in ASP.NET MVC. That’s not the case, though. You actually have quite a number of options with regard to styling those boogers. Like many of the helpers in MVC, the Html.ValidationMessageFor helper has multiple prototypes. One of those prototypes lets you pass a dictionary, or anonymous object, representing attribute values for the resulting markup. @Html.ValidationMessageFor( m => Model.Whatever, null, new { @class = “my-error” }) By passing the htmlAttributes parameter, which is the last parameter in the call to the prototype of Html.ValidationMessageFor shown above, I can style the resulting markup by associating styles to the my-error css class.  When you run your MVC project and view the source, you’ll notice that MVC adds the class field-validation-valid or field-validation-error to a span created by the helper. You could actually just style those classes instead of adding your own…it’s really up to you. Now, what if you wanted to move that error message around? Maybe you want to put that error message in a box or a callout. How do you do that? When I first started using MVC, it didn’t occur to me that the Html.ValidationMessageFor helper just spits out a little bit of markup. I wanted to put the error messages in boxes with white backgrounds, our site originally had a black background, and show a little nib on the side to make them look like callouts or conversation bubbles. Not realizing how much freedom there is in the styling and markup, and after reading someone else’s post, I created my own version of the ValidationMessageFor helper that took out the span and replaced it with divs. I styled the divs to produce the effect of a popup box and had a lot of trouble with sizing and such. That’s a really silly and unnecessary way to solve this problem. If you want to move your error messages around, all you have to do is move the helper. MVC doesn’t appear to care where you put it, which makes total sense when you think about it. Html.ValidationMessageFor is just spitting out a little markup using a little bit of reflection on the name you’re passing it. All you’ve got to do to style it the way you want it is to put it in whatever markup you desire. Take a look at this, for example… <div class=”my-anchor”>@Html.ValidationMessageFor( m => Model.Whatever )</div> @Html.TextBoxFor(m => Model.Whatever) Now, given that bit of HTML, consider the following CSS… <style> .my-anchor { position:relative; } .field-validation-error {    background-color:white;    border-radius:4px;    border: solid 1px #333;    display: block;    position: absolute;    top:0; right:0; left:0;    text-align:right; } </style> The my-anchor class establishes an anchor for the absolutely positioned error message. Now you can move the error message wherever you want it relative to the anchor. Using css3, there are some other tricks. For example, you can use the :not(:empty) selector to select the span and apply styles based upon whether or not the span has text in it. Keep it simple, though. Moving your elements around using absolute positioning may cause you issues on devices with screens smaller than your standard laptop or PC. While looking for something else recently, I saw someone asking how to style the output for Html.ValidationSummary.  Html.ValidationSummery is the helper that will spit out a list of property errors, general model errors, or both. Html.ValidationSummary spits out fairly simple markup as well, so you can use the techniques described above with it also. The resulting markup is a <ul><li></li></ul> unordered list of error messages that carries the class validation-summary-errors In the forum question, the user was asking how to hide the error summary when there are no errors. Their errors were in a red box and they didn’t want to show an empty red box when there aren’t any errors. Obviously, you can use the css3 selectors to apply different styles to the list when it’s empty and when it’s not empty; however, that’s not support in all browsers. Well, it just so happens that the unordered list carries the style validation-summary-valid when the list is empty. While the div rendered by the Html.ValidationSummary helper renders a visible div, containing one invisible listitem, you can always just style the whole div with “display:none” when the validation-summary-valid class is applied and make it visible when the validation-summary-errors class is applied. Or, if you don’t like that solution, which I like quite well, you can also check the model state for errors with something like this… int errors = ViewData.ModelState.Sum(ms => ms.Value.Errors.Count); That’ll give you a count of the errors that have been added to ModelState. You can check that and conditionally include markup in your page if you want to. The choice is yours. Obviously, doing most everything you can with styles increases the flexibility of the presentation of your solution, so I recommend going that route when you can. That picture of the fat guy jumping has nothing to do with the article. That’s just a picture of me on the roof and I thought it was funny. Doesn’t every post need a picture?

    Read the article

  • Field Report - Notes from IHRIM Atlanta Event

    - by Natalia Rachelson
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A guest post by Steve Boese, Director, Talent Strategy, Oracle Recently I had the pleasure to serve as a guest speaker at the IHRIM Atlanta/SE Chapter meeting in Atlanta, Georgia. The focus of my talk was Mobile Technology in Human Resources, and while still a new and developing area, the enormous growth and ubiquitous presence of mobile devices and increasing importance of and demand for constant connectivity in both our personal and professional lives has put planning and developing a mobile HR technology strategy high on many organizations lists of priorities in 2012. Numerous studies have shown that the confluence of ever-rising sales of smartphones and tablets; and the increasing tendency for workers of all kinds to be more mobile and less tied down to traditional, fixed-location workplaces and what now seem like old-fashioned PC-centric and traditional computing environments are driving Human Resources leaders to think about how, where, when, and for whom that the deployment of mobile HR solutions will help them address their business needs, and put information in the hands of those that need it, when they need it, and on their preferred devices. In the session we talked about some of the potential opportunities for mobile HR technologies, from simple workflow-based approval capability, to employee directories and robust employee profiles, to more advanced use cases like internal social networking and location-based mobile recruiting applications. And truly we are just scratching the surface of the potential and the value that all kinds of HR-related mobile technologies will help deliver to enterprises in the coming years. Additionally, it was encouraging to talk with many of the HR leaders in attendance who expressed interest in these kinds of mobile HR technology opportunities, as well as to hear how some of them are already working on developing their own mobile strategies or experimenting with mobile solutions in their workforces. It was a fantastic meeting and I’d like to express my thanks to Kim Bryant, IHRIM Atlanta/SE Board President, the other board members, and also the IHRIM Atlanta Chapter members and attendees at the event. If you are in the Atlanta area and are interested in HR and HR Technology, you can learn more about the programs and services that the Chapter has to offer at their website - http://www.ihrimatlantase.org/. And for people that are interested in what we at Oracle are working on in mobile, you can also sign up to receive the latest updates about the Oracle Fusion Applications tablet solutions, Oracle Fusion Tap, at https://fusiontap.oracle.com/.

    Read the article

  • Server-Sent Events using GlassFish (TOTD #179)

    - by arungupta
    Bhakti blogged about Server-Sent Events on GlassFish and I've been planning to try it out for past some days. Finally, I took some time out today to learn about it and build a simplistic example showcasing the touch points. Server-Sent Events is developed as part of HTML5 specification and provides push notifications from a server to a browser client in the form of DOM events. It is defined as a cross-browser JavaScript API called EventSource. The client creates an EventSource by requesting a particular URL and registers an onmessage event listener to receive the event notifications. This can be done as shown var url = 'http://' + document.location.host + '/glassfish-sse/simple';eventSource = new EventSource(url);eventSource.onmessage = function (event) { var theParagraph = document.createElement('p'); theParagraph.innerHTML = event.data.toString(); document.body.appendChild(theParagraph);} This code subscribes to a URL, receives the data in the event listener, adds it to a HTML paragraph element, and displays it in the document. This is where you'll parse JSON and other processing to display if some other data format is received from the URL. The URL to which the EventSource is subscribed to is updated on the server side and there are multipe ways to do that. GlassFish 4.0 provide support for Server-Sent Events and it can be achieved registering a handler as shown below: @ServerSentEvent("/simple")public class MySimpleHandler extends ServerSentEventHandler { public void sendMessage(String data) { try { connection.sendMessage(data); } catch (IOException ex) { . . . } }} And then events can be sent to this handler using a singleton session bean as shown: @Startup@Statelesspublic class SimpleEvent { @Inject @ServerSentEventContext("/simple") ServerSentEventHandlerContext<MySimpleHandler> simpleHandlers; @Schedule(hour="*", minute="*", second="*/10") public void sendDate() { for(MySimpleHandler handler : simpleHandlers.getHandlers()) { handler.sendMessage(new Date().toString()); } }} This stateless session bean injects ServerSentEventHandlers listening on "/simple" path. Note, there may be multiple handlers listening on this path. The sendDate method triggers every 10 seconds and send the current timestamp to all the handlers. The client side browser simply displays the string. The HTTP request headers look like: Accept: text/event-streamAccept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3Accept-Encoding: gzip,deflate,sdchAccept-Language: en-US,en;q=0.8Cache-Control: no-cacheConnection: keep-aliveCookie: JSESSIONID=97ff28773ea6a085e11131acf47bHost: localhost:8080Referer: http://localhost:8080/glassfish-sse/faces/index2.xhtmlUser-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_3) AppleWebKit/536.5 (KHTML, like Gecko) Chrome/19.0.1084.54 Safari/536.5 And the response headers as: Content-Type: text/event-streamDate: Thu, 14 Jun 2012 21:16:10 GMTServer: GlassFish Server Open Source Edition 4.0Transfer-Encoding: chunkedX-Powered-By: Servlet/3.0 JSP/2.2 (GlassFish Server Open Source Edition 4.0 Java/Apple Inc./1.6) Notice, the MIME type of the messages from server to the client is text/event-stream and that is defined by the specification. The code in Bhakti's blog can be further simplified by using the recently-introduced Twitter API for Java as shown below: @Schedule(hour="*", minute="*", second="*/10") public void sendTweets() { for(MyTwitterHandler handler : twitterHandler.getHandlers()) { String result = twitter.search("glassfish", String.class); handler.sendMessage(result); }} The complete source explained in this blog can be downloaded here and tried on GlassFish 4.0 build 34. The latest promoted build can be downloaded from here and the complete source code for the API and implementation is here. I tried this sample on Chrome Version 19.0.1084.54 on Mac OS X 10.7.3.

    Read the article

  • The Growing Importance of Network Virtualization

    - by user12608550
    The Growing Importance of Network Virtualization We often focus on server virtualization when we discuss cloud computing, but just as often we neglect to consider some of the critical implications of that technology. The ability to create virtual environments (or VEs [1]) means that we can create, destroy, activate and deactivate, and more importantly, MOVE them around within the cloud infrastructure. This elasticity and mobility has profound implications for how network services are defined, managed, and used to provide cloud services. It's not just servers that benefit from virtualization, it's the network as well. Network virtualization is becoming a hot topic, and not just for discussion but for companies like Oracle and others who have recently acquired net virtualization companies [2,3]. But even before this topic became so prominent, Solaris engineers were working on technologies in Solaris 11 to virtualize network services, known as Project Crossbow [4]. And why is network virtualization so important? Because old assumptions about network devices, topology, and management must be re-examined in light of the self-service, elasticity, and resource sharing requirements of cloud computing infrastructures. Static, hierarchical network designs, and inter-system traffic flows, need to be reconsidered and quite likely re-architected to take advantage of new features like virtual NICs and switches, bandwidth control, load balancing, and traffic isolation. For example, traditional multi-tier Web services (Web server, App server, DB server) that share net traffic over Ethernet wires can now be virtualized and hosted on shared-resource systems that communicate within a larger server at system bus speeds, increasing performance and reducing wired network traffic. And virtualized traffic flows can be monitored and adjusted as needed to optimize network performance for dynamically changing cloud workloads. Additionally, as VEs come and go and move around in the cloud, static network configuration methods cannot easily accommodate the routing and addressing flexibility that VE mobility implies; virtualizing the network itself is a requirement. Oracle Solaris 11 [5] includes key network virtualization technologies needed to implement cloud computing infrastructures. It includes features for the creation and management of virtual NICs and switches, and for the allocation and control of the traffic flows among VEs [6]. Additionally it allows for both sharing and dedication of hardware components to network tasks, such as allocating specific CPUs and vNICs to VEs, and even protocol-specific management of traffic. So, have a look at your current network topology and management practices in view of evolving cloud computing technologies. And don't simply duplicate the physical architecture of servers and connections in a virtualized environment…rethink the traffic flows among VEs and how they can be optimized using Oracle Solaris 11 and other Oracle products and services. [1] I use the term "virtual environment" or VE here instead of the more commonly used "virtual machine" or VM, because not all virtualized operating system environments are full OS kernels under the control of a hypervisor…in other words, not all VEs are VMs. In particular, VEs include Oracle Solaris zones, as well as SPARC VMs (previously called LDoms), and x86-based Solaris and Linux VMs running under hypervisors such as OEL, Xen, KVM, or VMware. [2] Oracle follows VMware into network virtualization space with Xsigo purchase; http://www.mercurynews.com/business/ci_21191001/oracle-follows-vmware-into-network-virtualization-space-xsigo [3] Oracle Buys Xsigo; http://www.oracle.com/us/corporate/press/1721421 [4] Oracle Solaris 11 Networking Virtualization Technology, http://www.oracle.com/technetwork/server-storage/solaris11/technologies/networkvirtualization-312278.html [5] Oracle Solaris 11; http://www.oracle.com/us/products/servers-storage/solaris/solaris11/overview/index.html [6] For example, the Solaris 11 'dladm' command can be used to limit the bandwidth of a virtual NIC, as follows: dladm create-vnic -l net0 -p maxbw=100M vnic0

    Read the article

< Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >