Search Results

Search found 14111 results on 565 pages for 'virtual machines'.

Page 430/565 | < Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >

• Joining new DC to AD - DNS name does not exist

  - by Andrew Connell

  I had a DC fail on me recently and trying to add a new one to my domain, although I'm sensing I might have other issues in my domain. I'm a dev at heart and know just enough about AD to be dangerous so looking for some assistance. My working DC is RIVERCITY-DC12. I'm trying to promote RIVERCITY-DC14 as a DC to the RIVERCITY domain, but when I run DCPROMO, at the NETWORK CREDENTIALS step where I point to the name of the domain (rivercity.local), I get "An AD DC for the domain rivercity.local cannot be contacted" and in the details see "The error was DNS name does not exist" Looking at RIVERCITY-DC12, I can see DNS is working, I've been able to query it from other machines in my domain, and no errors are reported in the DNS category within the Event Viewer. When I checked the FMSO roles, it shows RIVERCITY-DC12 is the machine for all listed roles. Not sure what I should do next or how to troubleshoot/investigate after searching around for a solution... ideas? Environment: Domain: rivercity (rivercity.local) Forest functional level: Windows 2000 (I'm more than happy to raise this) Windows Server 2008 All servers are Windows Server 2008 R2 SP1 (fully patched)

  Read the article

• Setting up VPN with Snow Leopard Server and Linksys router

  - by SueP

  I'd like to get VPN going so I can log in to the office securely from home. I'm using Snow Leopard machines everywhere, and currently have Airport Extremes set up at home and at the office. I have a mac mini with Snow Leopard Server that I'm going to move to the office to act as my server. I just bought a Linksys 4-port router because it says it does VPN (model RVS4000). My problem is, I don't have a clue how to set this thing up, and the more reading I do, the more confused I get. Do I need two of these routers, one at each end? My laptop and iPad claim they can do VPN, so I was assuming I only needed one VPN router? At this point, I literally don't know what questions to ask, or where to plug this thing in. Presumably, between the modem and the airport, but...? If somebody can walk me thru some really basic setup, I'd be very grateful. Right now, I feel like going outside and screaming for a while. But that might attract the local cougar, and after the prints I saw on the arena this afternoon, I don't want to draw its attention. :-)

  Read the article

• How do I clear out the ssh-agent entries (on Mac OS X )?

  - by cwd

  I'm running Mac OS X, and it appears that after SSHing to several machines, using identity files, my 'ssh-agent' builds up a lot of identity / keys and then sometimes offers too many to a remote machine, causing them to kick me off before connecting: Received disconnect from 10.12.10.16: 2: Too many authentication failures for cwd It's pretty obvious what's happening, and this page talks about it in more detail: SSH servers only allow you to attempt to authenticate a certain number of times. Each failed password attempt, each failed pubkey/identity that is offered, etc, take up one of these attempts. If you have a lot of SSH keys in your agent, you may find that an SSH server may kick you out before allowing you to attempt password authentication at all. If this is the case, there are a few different workarounds. Rebooting clears the agent and then everything works OK again. I can also add this line to my .ssh/config file to force it to use password authentication: PreferredAuthentications keyboard-interactive,password Anyhow, I saw the note on the page I referenced talking about deleting keys from the agent, but I'm not sure if that applies on a Mac since they appear to be cleared after reboot anyhow. Is there a simple way to clear out all keys in the 'ssh-agent' (the same thing that happens at reboot)?

  Read the article

• Setting up ssh config file with id_rsa through tunnel

  - by Rubens

  I've been struggling to set up a valid configuration to open a connection with a second machine, passing through another one, and using an id_rsa (which requests me a password) to connect to the third machine. I've asked this question in another forum, but I've received no answer that could be considered very helpful. The problem, better described, goes as follows: Local machine: user1@localhost Intermediary machine: user1@inter Remote target: user2@final I'm able to do the entire connection using pseudo-tty: ssh -t inter ssh user2@final (this will ask me the password for the id_rsa file I have in machine "inter") However, for speeding things up, I'd like to set my .ssh/config file, so that I can simply connect to machine "final" using: ssh final What I've got so far -- which does not work -- is, in my .ssh/config file: Host inter User user1 HostName inter.com IdentityFile ~/.ssh/id_rsa Host final User user2 HostName final.com IdentityFile ~/.ssh/id_rsa_2 ProxyCommand ssh inter nc %h %p The id_rsa file is used to connect to the middle machine (this requires me no password typing), and id_rsa_2 file is used to connect to machine "final" (this one requests a password). I've tried mixing up some LocalForward and/or RemoteForward fields, and putting the id_rsa files in both first and second machines, but I could not seem to succeed with no configuration whatsoever. Hope somebody can help me here! Regards! P.S.: the thread I've tried to get some help from: http://www.linuxquestions.org/questions/linux-general-1/proxycommand-on-ssh-config-file-4175433750/

  Read the article

• SQL Server 2008: Getting Login failed for user "Domain\User". Failed to open the explicitly specified database [CLIENT: IP.ADD.RR.ESS]

  - by GodEater

  This is a very similar issue to " SQL Server 2008 login problem with ASP.NET application: Failed to open the explicitly specified database " which unfortunately seems to have gone unsolved. My issue here is subtly different. Firstly the account failing login is not 'NT AUTHORITY\NETWORK SERVICE' - it's an actual domain account. Secondly, there are two machines involved - I gathered from the first question it was a single machine running both the IIS and SQL instances. The application which is trying to connect to the database is an ASP.NET one running on another server (if that makes any different, I'm not sure it does.) The ConnectionString being used in the web.config for the application is : data source=MySQLServer;initial catalog=MyDatabase;integrated security=sspi; And the Application Pool is set to NetworkService for Identity. So - in the web app, I get the following error : Cannot open database "MyDatabase" requested by the login. The login failed. Login failed for user 'MyDomain\WebServerMachineName$' In the SQL Server logs I see : Login failed for user 'MyDomain\WebServerMachineName$'. Reason: Failed to open the explicitly specified database. [CLIENT: Web.Server.IP.Address] Running this bit of SQL against the database in question : USE [MyDatabase] GO SELECT SDP.name AS [User Name], SDP.type_desc AS [User Type], UPPER(SDPS.name) AS [Database Role] FROM sys.database_principals SDP INNER JOIN sys.database_role_members SDRM ON SDP.principal_id=SDRM.member_principal_id INNER JOIN sys.database_principals SDPS ON SDRM.role_principal_id = SDPS.principal_id Gets me this result : MyDomain\WebServerMachineName$ WINDOWS_USER DB_DDLADMIN MyDomain\WebServerMachineName$ WINDOWS_USER DB_DATAREADER MyDomain\WebServerMachineName$ WINDOWS_USER DB_DATAWRITER Which appears to me to indicate I've got the permissions right. Anyone have any idea why it's not working, or how I can narrow the issue down some more?

  Read the article

• Postgresql connection refused

  - by Jonathan

  I'm trying to remotely connect to my postgresql database. I have two virtual machines set up both running ubuntu 14.04. I am trying to connect to the second vm using the first vm using psql -h 10.0.1.23 -U postgres -d postgres But I receive the error: Could not connect to server: Connection refused Is the server running on host "10.0.1.23" and accepting TCP/IP connections on port 5432? I have changed the pg_hba.conf and added host all all 10.0.1.64/24 md5 host all all * md5 host all all 0.0.0.0/0 md5 And changed the postgresql.conf listen_address=" * " In an attempt to allow all incoming connections. I have also tried to change the firewall settings, but I am unsure of whether or not the ports are properly listening for the connection. Edit: Output of netstat -an | grep -E '^tcp[^6].*LISTEN' tcp 0 0 127.0.1.1:53 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:23 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:5432 0.0.0.0:* LISTEN

  Read the article

• Failure to connect to admin share pops up dialog

  - by Jan

  I'm having an issue with a curious error message when accessing the administrative share on a remote machine. Specifically, the client is logged in as the domain administrator on the machine A, and runs some code that tries to access the admin share on B (a domain member). The access is done in .NET, along these lines (though I am not sure if the method of access makes a difference): string path = @"\\B\admin$"; if (Directory.Exists(path)) { try { path += @"\temp\"; if (!Directory.Exists(path)) { Directory.CreateDirectory(path); } path += "myfile_remote"; File.Copy("myfile", path); Now, on some machines this fails. That is not a big problem as we have a fallback. I'd like to know why but it is not the real issue. The problem is that running this piece of code causes a dialog box to pop up for the logged-in user on B, saying "network error trying to access \\B\admin$\temp\myfile_remote. Contact the network administrator and ask for the correct permissions". Unfortunately, it is a foreign language Windows so I'll spare you all posting a screenshot. It is skinned like a standard Windows dialog box. Why exactly is that dialog box popping up for the user and is there anything I can do about it? Edit to add: B is a Windows 7 Enterprise installation. The client is not aware of any GPO policies being installed. There is AV from Trend Micro installed.

  Read the article

• Windows 8 x64 with VMWare Workstation or inside ESXi

  - by Dommer

  I need to run several virtual machines on a core i7-920 box with 12GB or RAM and a 256GB SSD to host the VMs. It also has a Highpoint RocketRaid 2720SGL RAID controller with a 12TB RAID 5 array. I want one of my VMs to run Windows 8 x64, to have access to the RAID array as a native disk (not as networked drives and it needs to run at full speed) and to be able to send files quickly across the network. Initially I thought I'd try to do this using ESXi 5, but I have been unable to find any working RAID drivers for the RR2720SGL and it is not on the HCL for ESXi 5. In light of this, I have installed Windows 8 x64 on the hardware and am thinking of installing VMWare Workstation and running my VMs inside there. I guess my questions are these: How does VMWare Workstation 9 perform compared to ESXi 5? In the real world I mean? Presumably installing Win 8 as the host OS will give me way better performance for that Win 8 machine than Win 8 running under ESXi? I should stick with Windows 8 x64 as the host OS, right? If I install a domain controller VM inside my Win 8 box and join the Win 8 machine to that domain, am I insane (I would guess the Win 8 machine wouldn't see the domain controller until it finished starting everything up, but I don't think that matters)?! is it feasible to give metrics like this and if so, what is the likely value of x? 25%? 50%? 75%? Win 8 under ESXi runs x% as fast as Win 8 installed bare metal.

  Read the article

• Can't authorize a server for Amazon RDS

  - by Parris

  We are attempting to slowly migrate a website over to AWS among other things. We decided the first thing to move was the database. We have some dedicated server with a different hosting provider. We only have one IP. I am having trouble authorizing the ip so that the old server can connect to RDS. It simply hangs for a while while using the mysql cli, then responds: ERROR 2003 (HY000): Can't connect to MySQL server on 'db.address.us-east-1.rds.amazonaws.com' (110) It did work on my laptop though. I am not quite sure what is wrong. I have a feeling I don't quite understand CIDR/IP. I simply took the ip address and tacked on /32 at the end. Then I gleaned some information that it also has to do with subnet mask? ifconfig reports: 255.255.255.0 I found a calculator and the IP changed a bit and had /24 at the end. That still didn't work. One other note... perhaps i dont know enough about the differences between OS. The hosting provider is using centOS, while our development machines are all ubuntu. Any insight would be extremely helpful! THANKS :)

  Read the article

• MacBook Air Keeps dropping Wi-Fi

  - by Robert Patrick

  So my MacBook Air keeps dropping Wi-Fi for some reason. It happens ONLY on my home network, and ONLY to my computer. I'm using a Linksys WRT54G router. I'm the only Mac on the network. Every other Wi-Fi network is perfectly fine, and every other computer on this network is fine. Many things can happen. It could say it's connected, but not be able to access the internet (whether it tells me that there's no internet access or not). It may just drop Wi-Fi altogether, and refuse to connect. Generally, if I unplug the router and plug it back in, it's all good. It also works if I restart my computer. This happens multiple times a day. Yesterday I did everything I know to get it to connect (restart router many times, restart my MacBook), and nothing worked. Eventually it just magically worked. How can I stop this from happening? We got a notice from Comcast a while ago saying that a bot called DNS Changer was detected on one or more machines on the network. I'm assuming that this can't be me, right?

  Read the article

• I want my logs sent to my mail with logrotate

  - by lericson

  Not strictly a question about programming as such, more of a log handling question. Anyway. My company has multiple clients, and each of these clients have a set of logs that I'd rather much want to get sent to by e-mail to me. Now, another prerequisite is that they're hilighted by simple HTML. All that is very well, I've managed to make a hilighter for the given log types. So, what I do is I use logrotate's prerotate stuff to send the logs as an e-mail message. Example: /var/log/a.log /var/log/b.log { daily missingok copytruncate prerotate /usr/bin/python /home/foo/hilight_logs /var/log/{a,b}.log | /usr/sbin/sendmail -FLog\ mailer [email protected] [email protected] endscript } The problem with this approach is basically that logrotate sucks: it'll run the command for every log file specified in the specifier, and to my knowledge there's no way to know which of the log files is being handled. (Which wouldn't really help anyway.) Short of repeating the exact same logrotate up to 10 times on different machines, the only thing I can do is just to get bogged down with log spam every night. And I grew tired of it today, so I ask.

  Read the article

• VMware ESXi 4.1 snapshot of server 2008R2 machine generates 2 indentical snapshots

  - by Peter

  I have 2 VMs that are failing to get veeam backups, and it appears that the culprit is vmware snapshots. We are running Vsphere ESXi 4.1 build 320092, we have multiple server 2008R2 machines that take snapshots fine, but when with these two VMs when I take a snapshot I get 2 identical snapshots a few seconds apart. The snapshot manager only shows 1 snapshot, but there are 2 files 1 number off, that are identical sizes. There is only one disk on each VM, so that isn't the problem. Has anyone seen this behavior before and know how to fix it? Here are the files after a bad snapshot VM-XXX-000001-ctk.vmdk VM-XXX-000001-delta.vmdk VM-XXX-000001.vmdk VM-XXX-000002-ctk.vmdk VM-XXX-000002-delta.vmdk VM-XXX-000002.vmdk VM-XXX-2a659dbf.hlog VM-XXX-2a659dbf.vswp VM-XXX-Snapshot286.vmsn VM-XXX-aux.xml VM-XXX-ctk.vmdk VM-XXX-flat.vmdk VM-XXX-vss_manifests286.zip VM-XXX.nvram VM-XXX.vmdk VM-XXX.vmsd VM-XXX.vmx VM-XXX.vmxf vmware-20.log vmware-21.log vmware-22.log vmware-23.log vmware-24.log vmware-25.log vmware.log VM-XXX-000001.vmdk and VM-XXX-000002.vmdk are the exact same size.

  Read the article

• How can one use online backup with large amounts of static data?

  - by Billy ONeal

  I'd like to setup an offsite backup solution for about 500GB of data that's currently stored between my various machines. I don't care about data retention rates, as this is only a backup of, not primary storage, for my data. If the backup is stored on crappy non-redundant systems, that does not matter. The data set is almost entirely static, and mostly consists of things like installers for Visual Studio, and installer disk images for all of my games. I have found two services which meet most of this: Mozy Carbonite However, both services impose low bandwidth caps, on the order of 50kb/s, which prevent me from backing up a dataset of this size effectively (somewhere on the order of 6 weeks), despite the fact that I get multiple MB/s upload speeds everywhere else from this location. Carbonite has the additional problem that it tries to ignore pretty much every file in my backup set by default, because the files are mostly iso files and vmdk files, which aren't backed up by default. There are other services such as EC2 which don't have such bandwidth caps, but such services are typically stored in highly redundant servers, and therefore cost on the order of 10 cents/gb/month, which is insanely expensive for storage of this kind of data set. (At $50/month I could build my own NAS to hold the data which would pay for itself after ~2-3 months) (To be fair, they're offering quite a bit more service than I'm looking for at that price, such as offering public HTTP access to the data) Does anything exist meeting those requirements or am I basically hosed?

  Read the article

• Best way to build / implement a corporate developer Linux distro with multiple kernels?

  - by Garen

  At work we have Linux users who understandably prefer using Ubuntu. Problem is, we also have developer tools that only work with 'officially' supported Linux distributions that use much older 2.6.18 based kernels. (And even if they worked with newer ones, the vendors could always say they won't "support" the software unless it's on one of their 'officially' supported platforms.) We could of course just tell them to use CentOS or something else 2.6.18-based, and I'm sure their response would be something like: "you can take Ubuntu from our cold, dead hands." :) Which brings to me some questions--is there any good/easy/recommended way to run something like Ubuntu as a host VM and Centos 5.x as a guest OS (with which system--Xen,KVM,VMWare, ...?), and then roll that into our own custom internal distribution that could be easily installed? KVM looks like a good high-performance option just recently included in RHEL 5.4, but if hardware support for virtualization like Intel-VT or AMD-V is necessary, then I'd guess only those folks with fairly new PCs will be able to do it. Would be very interested to hear how anyone else has addressed this kind issue. EDIT: The target audience / users of this kind of system would be developers, each one needs to run locally licensed commercial software, so building out some separate beefy central machines isn't an option unfortunately due to license restrictions. Even if that weren't the case, a couple developers could quickly eat up the resources with parallel builds. :) Ideally, I was hoping there was some step-by-step guide out there to build your own pre-built distribution that had e.g. CentOS 5.x and Ubuntu Desktop as a guest.

  Read the article

• Remote connection to a Windows 2008 Server Web edition

  - by Lorenzo

  Hello I have just installed Windows 2008 web server to have a development/test site on my office. In the test network I only have 2 machines: Windows server 2008 Web Edition Vista x64 client machine with Visual Studio The client and the server are networked using a NETGEAR router. I have enabled Remote desktop on the server and when I try to connect to it within the Vista client I get the credential window as in the following screenshot. But even if I write the correct credentials I am not able to remote login on the server. Where am I doing wrong? Update 1 I have even tried to create a folder share on the server. But I am not able to access it for the same reason. User or password invalid it says. But this is impossible as I am logging in the server with the same credentials. Update 2 If I try to browse the network from the RDP client I receive a message saying that there are no server running Terminal Services in my network.... :O

  Read the article

• Thomson router reboots unexpectedly with an apparent remote connection attempt

  - by ChrisF

  I've got a weird problem. Every so often my rooter (a Thomson TG585 v8 running version 8.2.7.8 of it's firmware) reboots itself. It seems to be associated with this message in the event log: FIREWALL replay check (1 of 2): Protocol: ICMP Src ip: 183.178.144.177 Dst ip: xxx.xxx.xxx.xxx Type: Destination Unreachable Code: Host Unreacheable xxx.xxx.xxx.xxx is my external IP address 183.178.144.177 resolves to 183178144177.ctinets.com We've got a student from Hong Kong staying with us at the moment and the reboots seem coincidental with him starting up his laptop. I say this because a check on ctinets.com shows it to be based in Hong Kong, though our guest's laptop doesn't appear to have any software related to this company installed. I say "apparently" as he is running the Chinese version of Windows and his English doesn't cover technical subjects like this. I know this is an incoming message but I was assuming that it was in response to something on the student's laptop which is why the first thought was malware, but we've got anti virus on all the other machines and have run malwarebytes on his with a negative result so I don't think the problem is due to a virus or (known) trojan. What else can I do to stop this and identify the cause?

  Read the article

• Unable to connect via NetBIOS Name

  - by grom

  I can't connect to machines/shares by NetBIOS names. Below is console output showing the problem. C:\>nbtstat -n Local Area Connection: Node IpAddress: [192.168.1.100] Scope Id: [] NetBIOS Local Name Table Name Type Status --------------------------------------------- BEAST <00> UNIQUE Registered WORKGROUP <00> GROUP Registered BEAST <20> UNIQUE Registered WORKGROUP <1E> GROUP Registered WORKGROUP <1D> UNIQUE Registered ..__MSBROWSE__.<01> GROUP Registered C:\>nbtstat -A 192.168.1.3 Local Area Connection: Node IpAddress: [192.168.1.100] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- BRCLAPTOP <00> UNIQUE Registered WORKGROUP <00> GROUP Registered BRCLAPTOP <20> UNIQUE Registered WORKGROUP <1E> GROUP Registered MAC Address = 00-1C-BF-14-B8-6E C:\>ping beast Pinging beast [fe80::59b8:179f:b90b:a63f%11] with 32 bytes of data: Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Reply from fe80::59b8:179f:b90b:a63f%11: time<1ms Ping statistics for fe80::59b8:179f:b90b:a63f%11: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\>ping brclaptop Ping request could not find host brclaptop. Please check the name and try again. C:\>nbtstat -a brclaptop Local Area Connection: Node IpAddress: [192.168.1.100] Scope Id: [] Host not found.

  Read the article

• NetBackup's bplist doesn't get user/group info for Windows files

  - by Gnustavo

  I'm trying to get information about storage consumption from NetBackup's bplist output. I'm running NBU 6.0MP5 on a RHEL 3 server. The server is backing up several Solaris, Linux, and Windows machines. When I use bplist to get information about files backed up on any UNIX machine I get something like this: # bplist -C unixclient -R 99 -l -s 01/28/2006 -e 01/29/2006 / drwxr-xr-x test ccase 0 Nov 16 09:28 /l/home2/test/ -rw------- test ccase 4737 Jan 06 17:54 /l/home2/test/.bash_history -rw-rw-r-- test ccase 104 Nov 11 2004 /l/home2/test/.bashrc However, when I use it to list files backed up on any Windows client I can't get the user and group information. They both always appear as 'root'. Like this: # bplist -C winclient -t 13 -R 99 -l -s 02/20/2006 / drwx------ root root 0 Feb 20 14:26 /C/temp/ -rwx------ root root 41 Feb 20 14:26 /C/temp/asdf.txt drwx------ root root 0 May 25 2004 /C/temp/CTRMNGR/ Does anyone know why bplist doesn't show the correct user/group for Windows files? If it can't, is there a way to get that information using another command? Thanks. Gustavo.

  Read the article

• Why am I seeing Zero errors in non-ECC RAM?

  - by Alexander Shcheblikin

  According to sources, memory errors are a very probable event: Some say the probability of a DRAM error is 95% in just 3 days of operation of a computer with just 4 GB of RAM, others say 32% of servers experience at least one error in a month with 8% of DIMMs being at fault. Contrary to those horrors, in my more than 10 years of personal computers use I have seen exactly none of the memory errors. I admit I never paid special attention to the subject. However, I have ventured multi-hour memtest86 runs couple of times and never seen an error either. Some of the factors that IMO should aggravate the memory problems: I build my computers out of the most "bulk commodity" parts: mainstream budget motherboards and the next to cheapest memory. also I usually max out the technology available, e.g. in the times of 32 bit OS'es I used 4 GB of RAM and with the current desktop CPUs and the newer 64 bit OS'es I use 32 GB of RAM. memory usage is moderately heavy with lots of virtual machines up running small and big tasks 24/7/365. But nevertheless, no memory-related problems ever found! How's that?

  Read the article

• Skip new Windows 7 user selection and go to login prompt

  - by Doltknuckle

  We've begun our migration to windows 7 and we ran into an interesting issue. When we hit "CTRL+ALT+DEL" we are brought to the "User selection Screen". Normally, this screen will have an icon for every local user for the machine. These machines are Domain members with "Fast User Switch" disabled so no user names are listed only the "Other User" option. If you click "Other User" or hit enter, the system moves on to the normal login screen where it prompts for user name and password. Here's the issue: We want to find a way to skip over the part where a user selects "Other User". We essentially want the system to always assume that we always want "Other User" and to go directly to the login screen when a user hits "CTRL+ALT+DEL". What I find odd is that the "Other User" doesn't show up until we've had more than one domain user log in. Right after we re-image the machine, the login process goes directly to the user credential prompt. Anyone have any ideas?

  Read the article

• poor performance when deleteing many files

  - by choppy

  I've got two machines: The first is IBM Blade with 24 cores 96GB RAM and single local hard drive with 278GB divided to 4 partitions: 1. c: - 40GB; 3GB free 2. d: - 40GB; 37GB free 3. e: - 198322GB; 198.1 free 4. 100MB (EFI system Partition) Formatted with GPT The other is pizza server with 4 cores 8GB RAM and single local hard drive with 273GB divided to 3 partitions: 1. c: - 136.81; 20GB free 2. d: - 88.74GB; 87.91 free 3. e: - 47.85GB; 46.91 free Formatted with MBR I have two scripts, the first creates 20,000 files in one directory, each file size is 192KB, the second delete the folder (recursive) and prints how much time it toke to delete all files. The problem is on the first server (blade) it takes about 2 minutes to delete all 20,000 files while on the second (pizza) it takes about 4 seconds!? Both servers have clean windows server 2008R2 with no special application running on background. Any ideas what is going on?

  Read the article

• Win7 - Opening "Programs and Features" as Admin from command line (logged in as regular user)

  - by user1741264

  We have Win7 machines on a domain that we'd like to open the "Programs and Features" control applet via the command line while a regular user is logged in. Heres the catch: I know how to do this using runas from command line BUT after "Programs and Features" opens, I dont truly have the ability to remove a program. I am told that I need to be an Admin to do so. Here are the commands I have tried: runas /user:%computername%\administrator cmd.exe then in the new cmd window running: control appwiz.cpl runas /user:%companydomain%\%domainadminacct% cmd.exe then in the new cmd window running: control appwiz.cpl runas /user:%computername%\administrator cmd.exe then in the new cmd window running: rundll32.exe shell32.dll,Control_RunDLL appwiz.cpl runas /user:%companydomain%\%domainadminacct% cmd.exe then in the new cmd window running: rundll32.exe shell32.dll,Control_RunDLL appwiz.cpl I have also tried all of the above as one long line of code instead of launching a cmd.exe as Admin As you can see, I have tried running the command using both a local admin account (Administrator) AND a domain admin account. I have alos tried launching the runas command as one long command (opening the "programs and features") AND 1st launching a cmd.exe with admin rights and THEN launching the "Prgrams and Features" window. The result is the same: The "Programs and Features" windows opens but when I try to perform an uninstall, I am told I need Admin rights. Thus I am lead to believe that this instance of "Programs and Features" is not truly being run as an admin I am trying to avoid logging the regular user out. I am also aware that every program has its own uninstaller, I do not want to uninstall that way. I want to use the uninstaller in "Programs and Features". Any help is appreciated.

  Read the article

• Small office network setups

  - by user39822

  I work at a small office and we're overhauling our network setup there. We're a web dev company and at the moment we have 50+ production sites running on the same machine that runs our internal email, which is just plain stupid. We're moving all our client hosting off site and are now looking for something to run our internal office requirement. Below is a brain dump: Equal amount of Mac & PC, about 25 machines in total. We need a central "server" to host files that should be accessible everyone as a "network drive". If possible we'd like to use low cost hardware for this (Mac or Win based). Disk space should be upward of 1TB. Ideally we should also be able to run a small web server on this machine (LAMP stack) to run some planning and billing applications we wrote ourselves. We need some sort of MS Exchange alternative for things like a shared calendar and especially being able to set Out of Office replies. We have one printer that is connected to the network Setup should be something can preferably be managed easily via a graphical interface and NOT require command line skills. Users want to keep using Apple Mail or MS Outlook After a quick google I came across the Zimbra collaboration suite, can anyone recommend this or any other solution for our office?

  Read the article

• (Mac Intel) HP PS driver prints in B&W from Adobe Reader after installing Cannon PS driver

  - by John B

  I have a unique problem that leaves me at a loss as to where to start troubleshooting. We have three Macs we use for graphics, two of which are PowerPC and one which is Intel. They are set up to print to an HP 5500dn, but occasionally this printer gets tied up with a massive print job, so I installed the PS driver (iR-PSv1.81MacOSX) for the Cannon C3200 Printer/copier on each of the machines. Both of the PowerPC Macs installed without issue, but the Intel Mac exhibits strange behavior: I've confirmed that while the Cannon driver is installed (whether or not the Cannon is set up for printing in print settings), the HP 5500dn will print in color from Safari, but only prints in black and white from Adobe Reader. The Cannon printer itself has not exhibited any strange behavior As soon as the Cannon driver is uninstalled, the HP 5500dn prints in color from Adobe Reader again. We run a network of Windows PCs, and the 'Mac room' mostly takes care of itself, so we don't have any experienced Mac administrators onsite. The Cannon is capable of Appletalk, but the PS driver seemed easier to work with (and Appletalk is currently disable on the Cannon. I'm not against using the Appletalk compatible drivers, but I would rather use the PS driver if at all possible - I don't want to open up the proverbial can of worms. If someone has any clues or suggestions that would help troubleshoot this problem, I would be grateful. I've already done some googling, but due to the obscure nature of this problem, I haven't been very successful.

  Read the article

• Network connection keeps dropping - bad hardware?

  - by Bill Sambrone

  Hello all, I've into a bit of a wall with a client of mine. In an office of 20 people, he is the only one who experiences broken connections to his mapped network drives. I have everyone set up with about 6 mapped drives, all pointing to the same server (no DFS), and everyone else can access them lightning fast. The environment consists of a mix of Windows 7 and XP machines, all 32-bit. The server holding the data everyone is mapping to is running on Server 2008 R2, and is a domain controller. We recently swapped out their old 10/100 switch for a shiny new Dell PowerConnect gigabit switch. We have also replaced an old dying Sonicwall with a shiny new one. Everything is running on an ESX host except for the DC, where everyone is getting data from. In my client's office, we have done the following: Swapped out his computer (Win7 and XP box) Swapped out the desktop switch in his office Removed the desktop switch in his office Changed out the network cable going to the wall Ran 'net config server /autodisconnect:-1' on the server Disabled remote differential compression on his current Win7 box When we swapped out his network cable, everything seemed fine for about 4 days. Normally I would get a phone call a couple times per day letting me know that Outlook has crashed (there is a 9GB PST living on the server he is always connected to), or that his software he is running from his L drive has crashed. I almost thought I had this solved, but after we rebooted the DC the other night he all of a sudden couldn't stay connected to his mapped network drives for more than 10 minutes. When I ran 'net use' from the command prompt, it listed all the network drives where were randomly in a state of 'OK', 'Disconnected', or 'Reconnecting'. What else should I try? Maybe there is bad wiring in the wall, patch panel, or a bad port in the new switch I have in the server room?

  Read the article

< Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >