Search Results

Search found 16035 results on 642 pages for 'connection pooling'.

Page 431/642 | < Previous Page | 427 428 429 430 431 432 433 434 435 436 437 438  | Next Page >

• Monitor turns off about 1 second after turning it on

  - by r0ca

  Hi all! I have a hardware issue with some of the LCD monitors we have in our office. My problems is not related to video cards or anything else with the computer itself. I have 2 Dell 17" LCD screens that goes off (blank) after 1 or 2 seconds. The light remains green so it's not idling or sleeping. Just this morning, I had to replace one that goes off on 2 workstations and also on my laptop. Nothing to do with it. I tried the VGA and DVI connection w/out luck. I strongly think that this is something with a capacitor or something inside the screen but I can't figure out what it is... Is anybody heard of that kind of issue before? Regards, David.

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

  - by Peter Mounce

  Crossposted from here I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

  Read the article

• debian hang on startup "starting the winbind daemon: winbind"

  - by Bajingan Keparat

  I took a copy of a VM running a debian, just so that I can play around with it. I spin up the copy, but didn't give it any network connection to avoid conflict with the original one. However, when I turn the VM on, it seems to freeze after this startup message Starting Sambe daemons:nmbd smbd Starting PostgreSQL 8.4 database server: main Starting the Winbind daemon: winbind how do i fix this? I never get to the prompt to login. This vm does have a mount point that connects to a windows share folder.

  Read the article

• Is a 302 redirect to a random URL from the homepage an SEO problem?

  - by CookieMonster

  I originally posted this on Stackoverflow, but I believe here is a better place to ask. My web application is very similar to notepad.cc which redirects to a randomly generated URL upon access, e.g. http://myapp.com/roTr94h4Gd. (Please note that notepad.cc is not my site.) Probably because of this redirect feature, when I do "fetch as Google" or "fetch as Bingbot", I get a 302 and no html content. Not even a <html></html> tag. HTTP/1.1 302 Moved Temporarily Server: nginx/1.4.1 Date: Tue, 01 Oct 2013 04:37:37 GMT Content-Type: text/html Transfer-Encoding: chunked Connection: keep-alive X-Powered-By: PHP/5.4.17-1~dotdeb.1 Set-Cookie: PHPSESSID=vp99q5e5t5810e3bnnnvi6sfo2; expires=Thu, 03-Oct-2013 04:37:37 GMT; path=/ Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Location: /roTr94h4Gd How should I avoid 302 in this case? I suppose I could modify my site to prevent the redirect, but it is a necessary feature of my web app to generate a random URL on each access. I added <meta name="fragment" content="!"> tag into my index page and set it to return a static snapshot of my page when the flag is set. But this still returns a 302. I also added a header to return 200 before redirecting, but this had no effect, either. Could someone tell me a good suggestion to solve this problem?

  Read the article

• Windows 7: Server disappearing from Network window

  - by David Veeneman

  I am running a small (three computer) network on a Windows Server 2003 domain. All of the computers were just upgraded to Windows 7. Since the upgrade, the icon for the domain server periodically disappears from the Network window on all three computers. It doesn't happen at the same time on all computers--the icon typically disappears from one machine, but not the others. And it's not always the same computer. The network connection is still there--I can type \\myserver and get to the network shares. It's simply the icon that's disappearing. Has this happened to anyone else? Any suggestions for a fix? Thanks in advance.

  Read the article

• Oracle Worldwide Product Translation Group and Applications User Experience Working Together

  - by ultan o'broin

  The Applications User Experience (UX) Mobile team has been extending its ethnographic research to even more countries. Recently, the team conducted research in Sweden, and I am pleased to say I made the connection for the UX team with the Oracle's Worldwide Translation Product Group (WPTG) local (that is, in-country) language specialists. It struck me that WPTG's local market knowledge and insight that we heard about at an Oracle Usability Advisory Board meeting in the UK in 2011 would be very valuable to the UX efforts while, at the same time, UX could afford WPTG an opportunity to understand our design and development direction so that linguistic resources (terminology, style guides, translatability guidelines, and so on) for any translation of our mobile solutions could be prepared in advance. Brent White of the Mobile UX team takes notes as ethnography participant Capri Norman uses mobile technology to work in Stockholm. Pic credit: Oracle Applications UX. The UX team acknowledges Capri's kind permission to use this image. I'm told by Brent White of the Mobile UX team that the co-operation was a big success.  A WPTG Swedish language specialist joined a couple of ethnographic sessions, taking great notes and turning them around very fast for the UX team. And of course, a great local insight into Swedish culture and ways of working was provided too, along with some nice socializing!  More research in more countries is planned. Watch out for future blog posts and other communications about this great co-operation worldwide.

  Read the article

• Network on linux server is periodically down

  - by Fabian

  I have an old server running Fedora 4 that occasionally just stops responding via network for about an hour. This happens 1-2 times a week. Also no connection from the server itself to any other computer on the network is possible when it happens. The network settings and routes look fine. There are no unusual log messages and no unusual processes running at that time. If I restart the network or just do an ifconfig eth0 down & ifconfig eth0 up it works fine afterwards. I know that the server should be updated to a currently supported OS, but that is not really an easy option right now. Any ideas on how I could diagnose and fix that problem?

  Read the article

• NAT Error Message - Usage limit exceeded

  - by Kato

  Trying to configure a port to use for Vuze. Using the NAT/server port test, I was getting a message saying the connection timed out, the port was probably closed. I went back and made sure to open the specific port on my router, firewall, etc, but now I'm getting "NAT Error - Usage limit exceeded (173.32.41.24:0). I'm on a mac pro running leopard, trial versions of intego netbarrier and virusbarrier. Network utilities and netbarrier both claim the port is open. I've tested a bunch of other ports, but all give the same message.

  Read the article

• Connecting to a computer using Remote Desktop does not work first time

  - by dev

  Hi all, I'm having a weird sort of problem with Remote desktop and that too, only on one machine. If I boot up this machine, and then try to Remote desktop into it, it does not work.( I get the following error: The client could not connect to the remote computer. Remote connections might not be enabled or the computer might be too busy to accept new connections. It is also possible that network problems are preventing your connection. Please try connecting again later. If the problem continues to occur, contact your administrator. ) But if I physically log into it & then log out, and then try to Remote desktop into it, it works flawlessly. The problematic machine is Xp 64 Bit, but other systems with Xp 64 Bit work fine. Any Ideas on how to solve this?

  Read the article

• Disable ALTQ for internal network traffic

  - by javanix

  I currently have a FreeBSD 8.2 media server set up on my LAN that I use to stream my music from. I also have an SSH login that I use to do file transfers to and from this server remotely. I would like to set up ALTQ (and have gotten this working) to limit my outgoing bandwidth from the server for SSH traffic. However, configuring ALTQ this way is also limiting my internal traffic (and thus interfering with my music streaming) since I am only using a single network interface. Can anyone show me how I would use PF and ALTQ to limit outgoing WAN traffic while allowing all internal LAN traffic to go through unhindered? ext_if="eth0" int_if="eth0" altq on eth0 cbq bandwidth 1Mb queue { std, ssh } queue std bandwidth 80% cbq(default) queue ssh bandwidth 20% cbq(ecn) pass out on eth0 proto tcp to port 22 queue ssh eth0 is my LAN interface, my total WAN bandwidth on my cable connection is 1Mb/s, and my internal network is 10/100.

  Read the article

• How to split audio into multiple channels from optical S/PDIF or 1/8"?

  - by Josh M.

  I have a motherboard which has an optical S/PDIF output or 1/8". I'd like to "split" that signal into the appropriate channels so that I can then connect that to the wires behind my car's headunit which, in turn, run to the amp. The factory Bose amp just takes a single connector with a million wires running out of it, so that's why I would need to separate the signal into separate channels. On the other end there are four RCA connectors: front left, front right, rear left, rear right. The sub-woofer signal does not require an additional connection. Edit: Revised to include S/PDIF or 1/8".

  Read the article

• windows cache not working as it should?

  - by piotrektt

  I run windows 2012 server with data center. The setup is with 60GB of RAM. I have one file shared on VHD and when I copy this file locally the RAM cache is all used up but when multiple computers connect to the share it the cache is not used. The network is 8Gb. The whole network is around 200 computers that need to read that one file but on this setup only 10 connection kills the server. Is there any way to check what is going on? What other solution can I use to manage cache in windows?

  Read the article

• low speed web application, Server problem or Application

  - by Ashian

  Hi, I have a web application written by asp.net (c#) sql server 2005. we host it on 2 dedicated server ( IIS and SQL server ) From some month ago , in some days of week we have many reports about speed issue. we have some other application on this server using same database. when we have speed problem all aplication on these server have this problem, but applications on other server in same data center work correctly. ram and cpu usage are ok. how can I check that the problem related to internet connection or my application design? which parameters must be checked. Some other information In applications users can upload several files to server , each file up to 3 MB. we use a sql web admin application, on same server that has same problem, this is a standard application which work perfectly on other servers. Thanks

  Read the article

• Improve performance on Lync desktop sharing

  - by Trikks

  I'm using Lync 2010 server to handle some clients communication and screen sharing. The biggest issue is the performance with screen sharing, it is of rather high quality but the frame rate is very poor. I have been reading and searching a lot on the subject and 95% of all topics is about bandwidth, we have a 200/200 MBit Internet connection solely for this application. Also my test machines runs on an internal gigabit lan. The speeds between all boxes is hysterically fast. Next step was to ensure that there where some profiles for different bandwidths, so i registered some New-CsNetworkBandwidthPolicyProfile -Identity 50Mb_Link -Description "BW profile for 50Mb links" -AudioBWLimit 20000 -AudioBWSessionLimit 200 -VideoBWLimit 14000 -VideoBWSessionLimit 700 New-CsNetworkBandwidthPolicyProfile -Identity 100Mb_Link -Description "BW profile for 100Mb links" -AudioBWLimit 30000 -AudioBWSessionLimit 300 -VideoBWLimit 25000 -VideoBWSessionLimit 1500 Nothing fancy happend here either. Non of the test boxes have anything from Norton installed, they doesn't have any firewalls running (nor does the Lync server), all fences are down in this environment just for the testing. Is there any thing that I may have missed to improve the quality of this? Thanks

  Read the article

• estimating size of reply HTTP headers

  - by Guanidene

  I am trying to download a file via a basic socket connection, using a HTTP GET request. So, I have to specify how many bytes of data coming in I have to read from the socket. However, I am having trouble deciding the amount of data (say, in bytes) the server would reply back with. I know that there is a "Content-Length" field in the reply sent by server, but that gives me the size of the actual data (without the http headers). Is there a way to get the exact size of HTTP headers sent by the server or an estimation is required? (I am doing this for downloading on a mobile network, where every bit of data matters in terms of time and money, so I don't wish to make an unnecessary larger estimate of the header size.)

  Read the article

• Server suddenly running out of entropy

  - by Creshal

  Since a reboot yesterday, one of our virtual servers (Debian Lenny, virtualized with Xen) is constantly running out of entropy, leading to timeouts etc. when trying to connect over SSH / TLS-enabled protocols. Is there any way to check which process(es) is(/are) eating up all the entropy? Edit: What I tried: Adding additional entropy sources: time_entropyd, rng-tools feeding urandom back into random, pseudorandom file accesses – netted about 1 MiB additional entropy per second, problems still persisted Checking for unusual activity via lsof, netstat and tcpdump – nothing. No noticeable load or anything Stopping daemons, restarting permanent sessions, rebooting the entire VM – no change in behaviour What in the end worked: Waiting. Since about yesterday noon, there are no connection problems anymore. Entropy is still somewhat low (128 Bytes peak), but TLS/SSH sessions have no noticeable delay anymore. I'm slowly switching our clients back to TLS (all five of them!), but I don't expect any change in behavior now.

  Read the article

• Can't start firewall or automatic updates in Windows XP

  - by Chris Porter

  On a friends laptop following some viruses infestations there is a problem in starting the Windows firewall. The error is: Could not start the Windows Firewall/Internet Connection Sharing(ICS) service on Local Computer. Error 2: The system cannot find the file specified When attempting to turn on automatic updates in the security centre, the message is: We're sorry. The Security Center could not change your Automatic Updates settings. To try changing these settings yourself, go to System in Control Panel. On the Automtic Updates tab, select Automatic (recommended), and then click OK. All the options under "Automatic Updates" are greyed out. I've tried the suggestions below and many others: http://windowsxp.mvps.org/sharedaccess.htm http://support.Microsoft.com/kb/892199 http://windowsxp.mvps.org/repairwmi.htm I can't do a repair install because the installer doesn't detect existing versions. It's XP pro service pack 3.

  Read the article

• Reporting available RDP sessions

  - by Sergei

  Hi All Default Windows 2003 Server has two RDP sessions available.If all of them are taken by someone else you will only be notified about it after providing your credentials. This seems like a waste of time especially in our environment where we share a lot of development server. Could a message be given as soon as you open the connection window if the connections are taken up? We can use qwinsta based script to check sessions before logon but it's still takes time. Is there a feature to do what I am asking for?

  Read the article

• Why is Google Chrome making these weird requests?

  - by mackenir

  I noticed that now and again, Chrome will make three requests to weird hostnames that arent resolved. For example: HEAD http://gtblynlsos/ HTTP/1.1 Host: gtblynlsos Proxy-Connection: keep-alive Content-Length: 0 User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/534.13 (KHTML, like Gecko) Chrome/9.0.597.107 Safari/534.13 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-GB,en-US;q=0.8,en;q=0.6 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 Other example weird hostnames: http://nxibbjklov/ http://moheksgryj/ Has anyone else seen this? Any ideas what's going on? I have all Chrome extensions disabled.

  Read the article

• Intermittent USB 3.0 access - How do I troubleshoot?

  - by Billy ONeal

  I've got a WD Passport hard disk with "superspeed" USB 3.0 support. When I use my USB 3.0 flash drive (this is a Lenovo X220 laptop), USB 3.0 consistently works. But when I use the passport drive, almost without fail the connection drops to USB 2.0. Touching the cable seems to immediately trigger the problem, but it seems to happen on its own though. I've got another cable on order right now... but is it likely the cable's the issue here? Is there anything else I can check?

  Read the article

• Virtual PC "The page cannot be displayed" error connecting to iis7.5 site on Win7 host.

  - by stan

  I setup virtual pc with the Windows XP IE6 VHD to test a site on Windows 7 host. I created a loopback adapter connection on the host. I have several sites on IIS 7.5, I'm able to connect to all of them except one. And it's the site I need to test... I get "The page cannot be displayed" error. The site loads fine from the host(Windows 7). I've made sure the permissions match that of the other sites that do load. I've recreated the application in IIS manager. Does anyone know what the problem might be?

  Read the article

• proxy software that supports parallel transfer

  - by est

  Hi guys, I need to setup a really fast proxy server in a remote server, here's the scenario: The server prefetches 3KB of data, mostly HTTP resources. The server send to client 3KB of data, instead of traditional HTTP or SOCKS proxy, the server open multithreaded transfer with 3 connections, send 1KB of data per thread to each connection The client receives 1KBx3, and combine them to the original 3KB data, and return as a local HTTP proxy server. The client display the original data in browser via the local HTTP proxy The latency is not important as long as the transfer rate is good. Does any software like this exist? It's better if it's open source or free ones.

  Read the article

• Why such a dramatic difference in wireless router max. simultaneous connections?

  - by Jez

  Recently, I've needed to look into buying a wireless router for a mission-critical system at work that will need to support quite a few simultaneous connections (potentially a few hundred laptops). One thing I've noticed is that there seems to be a dramatic difference between the max. simultaneous connections different routers can support; see this page for example - anything from 32 to 35,000! Why is there this degree of difference? You'd have thought that if we know how to make routers that can handle thousands of connections, we wouldn't be making stuff that's limited to a pathetic 32 anymore. Is it a firmware thing? A hardware thing? Are low-end manufacturers purposely putting low arbitrary connection limits in so people can be "encouraged" to pay more for high-end routers?

  Read the article

• LPR command won't recognize CUPS printer

  - by Datapimp23

  I have a cups server with one shared printer configured on it. It prints test pages without problems. printername (Idle, Accepting Jobs, Shared) Description: desc Location: Driver: Zebra ZPL Label Printer (grayscale, 2-sided printing) Connection: socket://172.20.50.26 Defaults: job-sheets=none, none media=oe_w288h432_4x6in sides=one-sided This is the output from lpstat -t. it shows that the printer is idle and accepting requests admin@SERVER:~$ lpstat -t scheduler is running no system default destination device for printername: socket://172.20.50.26 printername accepting requests since Thu 26 Jan 2012 01:29:35 PM CET printer printername is idle. enabled since Thu 26 Jan 2012 01:29:35 PM CET Now when I want to send a printjob to it via an LPR command it won't recognize the printer /usr/bin/lpr -P printername test.pdf Result lpr: ttn_seg_zebra1: unknown printer What am I missing here ?

  Read the article

< Previous Page | 427 428 429 430 431 432 433 434 435 436 437 438  | Next Page >