Search Results

Search found 30511 results on 1221 pages for 'linux networking'.

Page 431/1221 | < Previous Page | 427 428 429 430 431 432 433 434 435 436 437 438  | Next Page >

• DNS issue on Fedora 12? wget wordpress.org fails where wget www.google.com works

  - by Tom Auger

  I'm administering a Fedora 12 box, but am quite new to networking specifics. Recently one of our WordPress apps hosted on our server has stopped being able to perform its auto-update or auto-download of plugins. Investigating further, I have tried the following: $ wget wordpress.org --2010-12-17 11:26:50-- http://wordpress.org/ Resolving wordpress.org... failed: Temporary failure in name resolution. wget: unable to resolve host address âwordpress.orgâ Whereas: $ wget www.google.com --2010-12-17 11:27:26-- http://www.google.com/ Resolving www.google.com... 74.125.226.82, 74.125.226.84, 74.125.226.80, ... Connecting to www.google.com|74.125.226.82|:80... connected. HTTP request sent, awaiting response... 302 Found Location: http://www.google.ca/ [following] --2010-12-17 11:27:26-- http://www.google.ca/ Resolving www.google.ca... 173.194.32.104 Connecting to www.google.ca|173.194.32.104|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: âindex.html.4â [ <=> ] 9,079 --.-K/s in 0.02s 2010-12-17 11:27:26 (462 KB/s) - âindex.html.4â Interestingly: $ ping wordpress.org PING wordpress.org (72.233.56.138) 56(84) bytes of data. 64 bytes from wordpress.org (72.233.56.138): icmp_seq=1 ttl=50 time=81.5 ms 64 bytes from wordpress.org (72.233.56.138): icmp_seq=2 ttl=50 time=67.3 ms ^C --- wordpress.org ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1783ms rtt min/avg/max/mdev = 67.361/74.448/81.536/7.092 ms and $ nslookup wordpress.org Server: 192.168.2.1 Address: 192.168.2.1#53 Non-authoritative answer: Name: wordpress.org Address: 72.233.56.138 Name: wordpress.org Address: 72.233.56.139 nscd has been stopped and flushed. iptables appear to be clean. At this point I have exhausted my limited abilities to diagnose the issue. Can anyone suggest a resolution path?

  Read the article

• Blocking HTTPS and P2P Traffic

  - by Genboy

  I have a Debian server running at the gateway level on a LAN. This runs squid for creating block lists of websites - for eg. blocking social networking on the LAN. Also uses iptables. I am able to do a lot of things with squid & iptables, but a few things seem difficult to achieve. 1) If I block facebook through their http url, people can still access https://www.facebook.com because squid doesn't go through https traffic by default. However, if the users set the gateway IP address as proxy on their web browser, then https is also blocked. So I can do one thing - using iptables drop all outgoing 443 traffic, so that people are forced to set proxy on their browser in order to browse any HTTPS traffic. However, is there a better solution for this. 2) As the number of blocked urls increase in squid, I am planning to integrate squidguard. However, the good squidguard lists are not free for commercial use. Anyone knows of a good squidguard list which is free. 3) Block yahoo messenger, gtalk etc. There are so many ports on which these Instant Messenger softwares work. You need to drop lots of outgoing ports in iptables. However, new ports get added, so you have to keep adding them. And even if your list of ports is current, people can still use the web version of gtalk etc. 4) Blocking P2P. Haven't been able to figure out how to do this till now.

  Read the article

• a brand new FS based on a database without using fuse

  - by Devrim

  hi all, To serve millions of files out of a single directory, being able to connect to a drive from hundreds of endpoints, and for some other reasons (to avoid gluster/nfs/all fs based networking solutions), I want to evaluate the possibility of making a filesystem that's based on a mongodb (or any other). Basically, it works like fusefs, every single file is kept in mongo gridfs. In theory, I do, mount mongodbfs /mountPoint mongodb://localhost then when i say touch /mountPoint/test.txt this file is inserted into mongodb. This FS will also store uid/gid and perms with the file, we can throw hundreds of servers to it, and no useradd will be necessary. I'm not thinking to include all the features of FS, just the ones we need. My question is, how do I start my quest in finding resources, books, links, people, developers who'd help me implement this? at least a proof of concept. Is it feasible? What should I expect as a timeline for such undertaking? Please only think about gazillion small files and folders.

  Read the article

• Oracle Linux sort en version 6.3 : améliorations du système de fichiers Btrfs, des performances et optimisations du Kernel

  Oracle Linux sort en version 6.3 améliorations du système de fichiers Btrfs, des performances et optimisations du Kernel Oracle a publié récemment la version 6.3 de son système d'exploitation Oracle Linux. Créée à partir du clonage des sources de la distribution Red Hat Enterprise Linux (RHEL), cette mouture contient toutes les améliorations et nouveautés de RHEL 6.3. La plus grande différence entre Oracle Linux 6.3 et RHEL 6.3 est l'utilisation du noyau optimisé 2.6.39, qui dispose de plusieurs améliorations et corrections par rapport à l'original, et l'installation par défaut de « Unbreakable Enterprise Kernel 3.0.16 ». Oracle Linux 6.3 propose également la mise à jour de plusi...

  Read the article

• OpenVPN - Ubuntu 10.04 - Client Can't Connect to Server - Linux Route Add Command Failed

  - by nicorellius

  I suppose this could be asked on Server Fault as well, but it is specific to the client so I thought I'd start here. I have keys for access to an OpenVPN server already in place. I have used these keys to connect already, but using a Windows XP machine. On a Ubuntu machine, I installed OpenVPN and then configured client.conf file so that I could run: sudo openvpn --config client.conf And it seems correct but I still can't connect and get these errors and lines of output: Mon May 31 14:34:57 2010 ERROR: Linux route add command failed: external program exited with error status: 7 Mon May 31 14:34:57 2010 /sbin/route add -net 10.8.0.1 netmask 255.255.255.255 gw 10.8.0.17 SIOCADDRT: File exists Mon May 31 14:34:57 2010 ERROR: Linux route add command failed: external program exited with error status: 7 Mon May 31 14:34:57 2010 Initialization Sequence Completed I searched the net for forums and ideas and tried some file moving and renaming but still ended up in the same place.

  Read the article

• high load average, high wait, dmesg raid error messages (debian nfs server)

  - by John Stumbles

  Debian 6 on HP proliant (2 CPU) with raid (2*1.5T RAID1 + 2*2T RAID1 joined RAID0 to make 3.5T) running mainly nfs & imapd (plus samba for windows share & local www for previewing web pages); with local ubuntu desktop client mounting $HOME, laptops accessing imap & odd files (e.g. videos) via nfs/smb; boxes connected 100baseT or wifi via home router/switch uname -a Linux prole 2.6.32-5-686 #1 SMP Wed Jan 11 12:29:30 UTC 2012 i686 GNU/Linux Setup has been working for months but prone to intermittently going very slow (user experience on desktop mounting $HOME from server, or laptop playing videos) and now consistently so bad I've had to delve into it to try to find what's wrong(!) Server seems OK at low load e.g. (laptop) client (with $HOME on local disk) connecting to server's imapd and nfs mounting RAID to access 1 file: top shows load ~ 0.1 or less, 0 wait but when (desktop) client mounts $HOME and starts user KDE session (all accessing server) then top shows e.g. top - 13:41:17 up 3:43, 3 users, load average: 9.29, 9.55, 8.27 Tasks: 158 total, 1 running, 157 sleeping, 0 stopped, 0 zombie Cpu(s): 0.4%us, 0.4%sy, 0.0%ni, 49.0%id, 49.7%wa, 0.0%hi, 0.5%si, 0.0%st Mem: 903856k total, 851784k used, 52072k free, 171152k buffers Swap: 0k total, 0k used, 0k free, 476896k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3935 root 20 0 2456 1088 784 R 2 0.1 0:00.02 top 1 root 20 0 2028 680 584 S 0 0.1 0:01.14 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.12 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 7 root 20 0 0 0 0 S 0 0.0 0:00.16 ksoftirqd/1 8 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 9 root 20 0 0 0 0 S 0 0.0 0:00.42 events/0 10 root 20 0 0 0 0 S 0 0.0 0:02.26 events/1 11 root 20 0 0 0 0 S 0 0.0 0:00.00 cpuset 12 root 20 0 0 0 0 S 0 0.0 0:00.00 khelper 13 root 20 0 0 0 0 S 0 0.0 0:00.00 netns 14 root 20 0 0 0 0 S 0 0.0 0:00.00 async/mgr 15 root 20 0 0 0 0 S 0 0.0 0:00.00 pm 16 root 20 0 0 0 0 S 0 0.0 0:00.02 sync_supers 17 root 20 0 0 0 0 S 0 0.0 0:00.02 bdi-default 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/0 19 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/1 20 root 20 0 0 0 0 S 0 0.0 0:00.02 kblockd/0 21 root 20 0 0 0 0 S 0 0.0 0:00.08 kblockd/1 22 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpid 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_notify 24 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_hotplug 25 root 20 0 0 0 0 S 0 0.0 0:00.00 kseriod 28 root 20 0 0 0 0 S 0 0.0 0:04.19 kondemand/0 29 root 20 0 0 0 0 S 0 0.0 0:02.93 kondemand/1 30 root 20 0 0 0 0 S 0 0.0 0:00.00 khungtaskd 31 root 20 0 0 0 0 S 0 0.0 0:00.18 kswapd0 32 root 25 5 0 0 0 S 0 0.0 0:00.00 ksmd 33 root 20 0 0 0 0 S 0 0.0 0:00.00 aio/0 34 root 20 0 0 0 0 S 0 0.0 0:00.00 aio/1 35 root 20 0 0 0 0 S 0 0.0 0:00.00 crypto/0 36 root 20 0 0 0 0 S 0 0.0 0:00.00 crypto/1 203 root 20 0 0 0 0 S 0 0.0 0:00.00 ksuspend_usbd 204 root 20 0 0 0 0 S 0 0.0 0:00.00 khubd 205 root 20 0 0 0 0 S 0 0.0 0:00.00 ata/0 206 root 20 0 0 0 0 S 0 0.0 0:00.00 ata/1 207 root 20 0 0 0 0 S 0 0.0 0:00.14 ata_aux 208 root 20 0 0 0 0 S 0 0.0 0:00.01 scsi_eh_0 dmesg suggests there's a disk problem: .............. (previous episode) [13276.966004] raid1:md0: read error corrected (8 sectors at 489900360 on sdc7) [13276.966043] raid1: sdb7: redirecting sector 489898312 to another mirror [13279.569186] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13279.569211] ata4.00: irq_stat 0x40000008 [13279.569230] ata4.00: failed command: READ FPDMA QUEUED [13279.569257] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13279.569262] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13279.569306] ata4.00: status: { DRDY ERR } [13279.569321] ata4.00: error: { UNC } [13279.575362] ata4.00: configured for UDMA/133 [13279.575388] ata4: EH complete [13283.169224] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13283.169246] ata4.00: irq_stat 0x40000008 [13283.169263] ata4.00: failed command: READ FPDMA QUEUED [13283.169289] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13283.169294] res 41/40:00:07:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13283.169331] ata4.00: status: { DRDY ERR } [13283.169345] ata4.00: error: { UNC } [13283.176071] ata4.00: configured for UDMA/133 [13283.176104] ata4: EH complete [13286.224814] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13286.224837] ata4.00: irq_stat 0x40000008 [13286.224853] ata4.00: failed command: READ FPDMA QUEUED [13286.224879] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13286.224884] res 41/40:00:06:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13286.224922] ata4.00: status: { DRDY ERR } [13286.224935] ata4.00: error: { UNC } [13286.231277] ata4.00: configured for UDMA/133 [13286.231303] ata4: EH complete [13288.802623] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13288.802646] ata4.00: irq_stat 0x40000008 [13288.802662] ata4.00: failed command: READ FPDMA QUEUED [13288.802688] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13288.802693] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13288.802731] ata4.00: status: { DRDY ERR } [13288.802745] ata4.00: error: { UNC } [13288.808901] ata4.00: configured for UDMA/133 [13288.808927] ata4: EH complete [13291.380430] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13291.380453] ata4.00: irq_stat 0x40000008 [13291.380470] ata4.00: failed command: READ FPDMA QUEUED [13291.380496] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13291.380501] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13291.380577] ata4.00: status: { DRDY ERR } [13291.380594] ata4.00: error: { UNC } [13291.386517] ata4.00: configured for UDMA/133 [13291.386543] ata4: EH complete [13294.347147] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13294.347169] ata4.00: irq_stat 0x40000008 [13294.347186] ata4.00: failed command: READ FPDMA QUEUED [13294.347211] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13294.347217] res 41/40:00:06:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13294.347254] ata4.00: status: { DRDY ERR } [13294.347268] ata4.00: error: { UNC } [13294.353556] ata4.00: configured for UDMA/133 [13294.353583] sd 3:0:0:0: [sdc] Unhandled sense code [13294.353590] sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [13294.353599] sd 3:0:0:0: [sdc] Sense Key : Medium Error [current] [descriptor] [13294.353610] Descriptor sense data with sense descriptors (in hex): [13294.353616] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [13294.353635] 23 05 6a 06 [13294.353644] sd 3:0:0:0: [sdc] Add. Sense: Unrecovered read error - auto reallocate failed [13294.353657] sd 3:0:0:0: [sdc] CDB: Read(10): 28 00 23 05 6a 00 00 00 08 00 [13294.353675] end_request: I/O error, dev sdc, sector 587557382 [13294.353726] ata4: EH complete [13294.366953] raid1:md0: read error corrected (8 sectors at 489900544 on sdc7) [13294.366992] raid1: sdc7: redirecting sector 489898496 to another mirror and they're happening quite frequently, which I guess is liable to account for the performance problem(?) # dmesg | grep mirror [12433.561822] raid1: sdc7: redirecting sector 489900464 to another mirror [12449.428933] raid1: sdb7: redirecting sector 489900504 to another mirror [12464.807016] raid1: sdb7: redirecting sector 489900512 to another mirror [12480.196222] raid1: sdb7: redirecting sector 489900520 to another mirror [12495.585413] raid1: sdb7: redirecting sector 489900528 to another mirror [12510.974424] raid1: sdb7: redirecting sector 489900536 to another mirror [12526.374933] raid1: sdb7: redirecting sector 489900544 to another mirror [12542.619938] raid1: sdc7: redirecting sector 489900608 to another mirror [12559.431328] raid1: sdc7: redirecting sector 489900616 to another mirror [12576.553866] raid1: sdc7: redirecting sector 489900624 to another mirror [12592.065265] raid1: sdc7: redirecting sector 489900632 to another mirror [12607.621121] raid1: sdc7: redirecting sector 489900640 to another mirror [12623.165856] raid1: sdc7: redirecting sector 489900648 to another mirror [12638.699474] raid1: sdc7: redirecting sector 489900656 to another mirror [12655.610881] raid1: sdc7: redirecting sector 489900664 to another mirror [12672.255617] raid1: sdc7: redirecting sector 489900672 to another mirror [12672.288746] raid1: sdc7: redirecting sector 489900680 to another mirror [12672.332376] raid1: sdc7: redirecting sector 489900688 to another mirror [12672.362935] raid1: sdc7: redirecting sector 489900696 to another mirror [12674.201177] raid1: sdc7: redirecting sector 489900704 to another mirror [12698.045050] raid1: sdc7: redirecting sector 489900712 to another mirror [12698.089309] raid1: sdc7: redirecting sector 489900720 to another mirror [12698.111999] raid1: sdc7: redirecting sector 489900728 to another mirror [12698.134006] raid1: sdc7: redirecting sector 489900736 to another mirror [12719.034376] raid1: sdc7: redirecting sector 489900744 to another mirror [12734.545775] raid1: sdc7: redirecting sector 489900752 to another mirror [12734.590014] raid1: sdc7: redirecting sector 489900760 to another mirror [12734.624050] raid1: sdc7: redirecting sector 489900768 to another mirror [12734.647308] raid1: sdc7: redirecting sector 489900776 to another mirror [12734.664657] raid1: sdc7: redirecting sector 489900784 to another mirror [12734.710642] raid1: sdc7: redirecting sector 489900792 to another mirror [12734.721919] raid1: sdc7: redirecting sector 489900800 to another mirror [12734.744732] raid1: sdc7: redirecting sector 489900808 to another mirror [12734.779330] raid1: sdc7: redirecting sector 489900816 to another mirror [12782.604564] raid1: sdb7: redirecting sector 1242934216 to another mirror [12798.264153] raid1: sdc7: redirecting sector 1242935080 to another mirror [13245.832193] raid1: sdb7: redirecting sector 489898296 to another mirror [13261.376929] raid1: sdb7: redirecting sector 489898304 to another mirror [13276.966043] raid1: sdb7: redirecting sector 489898312 to another mirror [13294.366992] raid1: sdc7: redirecting sector 489898496 to another mirror although the arrays are still running on all disks - they haven't given up on any yet: # cat /proc/mdstat Personalities : [raid1] [raid0] md10 : active raid0 md0[0] md1[1] 3368770048 blocks super 1.2 512k chunks md1 : active raid1 sde2[2] sdd2[1] 1464087824 blocks super 1.2 [2/2] [UU] md0 : active raid1 sdb7[0] sdc7[2] 1904684920 blocks super 1.2 [2/2] [UU] unused devices: <none> So I think I have some idea what the problem is but I am not a linux sysadmin expert by the remotest stretch of the imagination and would really appreciate some clue checking here with my diagnosis and what do I need to do: obviously I need to source another drive for sdc. (I'm guessing I could buy a larger drive if the price is right: I'm thinking that one day I'll need to grow the size of the array and that would be one less drive to replace with a larger one) then use mdadm to fail out the existing sdc, remove it and fit the new drive fdisk the new drive with the same size partition for the array as the old one had use mdadm to add the new drive into the array that sound OK?

  Read the article

• SSH Tunneling from Windows to Linux/Ubuntu

  - by Mike

  My question is for my girlfriend basicly.... She works at a mall and doesn't do much so she likes to get on myspace and facebook as most girls do and yahoo to check her email. Well she uses her laptop to connect to a wireless network that doesn't allow it.... so I did some research and got putty and connected to my linux box I have here at home and it worked somewhat. My problem is it only views my webpages I have created here on this box it won't go outside of the linux host. I did it like this in putty... port is 1000 and hostname:80 is what I got outa my research then connected after seting up the tunnel bam worked for all webpages on my box but when she puts in www.myspace.com it redirects to my index.php in my var/www and won't travel outside that as I said.. Any help would be much obliged.

  Read the article

• Active Directory, Linux, and User Private Groups

  - by larsks

  We're in the process of moving from NIS on our Linux systems to binding everything to Active Directory. The NIS environment follows the common standard used by many Linux distributions that a user's primary group is a group of the same name as the user (and of which the user is typically the only member). I have been informed that in the Active Directory environment, you may not have a group name with the same name as a user (specifically, that no two AD security objects may have the same name). This would seem to complicate the process of moving our group definitions into AD. It looks like we could maintain the NIS group information in AD using only POSIX attributes (e.g., not an actual AD security object), but that seems like a suboptimal fix (because we do really want to have the same view of group membership in both the Unix and AD worlds). Have you moved a large legacy NIS environment into Active Directory? How did you handle this situation?

  Read the article

• New XEN Server, Intel i7, Errors were encountered while processing: xen-linux-system-amd64

  - by Sheldon

  I have just got a new machine to run XEN VM's on, it has an Intel i7 processor: - Intel Haswell Core i7-4790 3.6GHz 8MB LGA1150 I have setup the host with the current 6.2.0 I have set up a new Debian 7 64bit VM and any package I try and run fails with the following errors: Errors were encountered while processing: xen-utils-common xen-utils-4.1 xen-system-amd64 xen-linux-system-3.2.0-4-amd64 xen-linux-system-amd64 E: Sub-process /usr/bin/dpkg returned an error code (1) Excuse my noob-ness but should it even be running an AMD package ? Any ideas on how to fix this ? Thanks

  Read the article

• Read Linux-formatted (ext3) EBS volume mounted on Windows Server 2008 instance

  - by Greg Owen

  I've got a Windows Server 2008 R2 instance set up in Amazon EC2. I've also got some Ubuntu instances on the same EC2 account. I'd like to be able to mount the EBS volume from one of the Ubuntu instances onto the Windows instance as an external drive and then access that drive from the Windows instance. I've looked at tools like ext2fsd and ext2 IFS, but these haven't worked (I couldn't get the former to work, and the latter says that it supports Windows 2008 but gives an error when I try to install it, saying that it only supports up to Windows 2003). I know that there are all kinds of tools to view Linux partitions and that there are filesystems that are compatible with both Linux and Windows, but neither of those options works here (I want to be able to attach and detach the Ubuntu volumes on command, rather than have a permanent partition, and Ubuntu EBS volumes are ext3 by default). Anybody know a good tool I should use?

  Read the article

• Seamless Remote Windows on Linux Client

  - by prestomation

  I really like the RemoteApp features of Windows Server 2008 Are there any solutions for similar functionality for Linux clients and a Windows server? We have users that are running Linux on the desktop and rdesktop to a Windows server, mostly for Outlook. It would be nice if Outlook could behave more seamlessly. From what I can tell rdesktop doesn't do that yet, it only implements RDP 5. I've also seen "SeamlessRDP" from Cendio, which is an extension to rdesktop, but I can't get it to work. I think it doesn't work in Vista, but that is just a guess. Any ideas? And thanks in advance. EDIT: I emailed Cendio and they confirmed SeamlessRDP doesn't work with Server 2008 for unknown reasons. It appears there is no way to do this with a 2k8 server. It's either windows clients with RemoteApp or using a pre-Vista OS with seamlessrdp

  Read the article

• Mac OS X & Linux: mount_nfs: can't access /nfs: Permission denied

  - by MountainX

  I have an Ubuntu 12.04 NFS server and I have an iMac NFS client running OS X 10.6.8. I believe I have everything set up properly, yet I still get this error on the Mac: mount_nfs: can't access /nfs: Permission denied My exports on the Linux server uses the insecure option like this: /export/home/me/ 192.168.100.132(rw,subtree_check,insecure,nohide) Where 192.168.100.132 is the address of my Mac. I have even tried using -o resvport on the Mac (in addition to insecure on Linux) and I still get the same error as above. $ sudo mount -t nfs -o resvport 192.168.100.1:/home/me /Users/me/mount Here is the output of showmount: # showmount -e 192.168.100.1 Export list for 192.168.100.1: /export/home/me 192.168.100.132 .... I have reviewed this similar question: How to mount NFS export on Mac OS X? And I have reviewed this frequently recommended tutorial: http://www.cyberciti.biz/faq/apple-mac-osx-nfs-mount-command-tutorial/ I still can't find a solution. Any ideas?

  Read the article

• "svn: Cannot negotiate authentication mechanism" for OSX CLI and WinXp TortoiseSVN, but linux CLI works

  - by dacracot

  I had a working subversion server which used the passwd file which stores passwords in clear text. My requirements changed so that passwords now need to be encrypted. I did everything according to the book to use SASL, or so I believe, but now only the linux command line can authenticate. My OSX users, which also use command line, and my WinXp users, which use TortoiseSVN get errors. Linux versions are 1.6.11. OSX versions are 1.6.17. And TortoiseSVN versions are 1.7.4. /opt/subversion/QRpage/conf/svnserve.conf: [general] anon-access = none auth-access = write realm = ABC [sasl] use-sasl = true min-encryption = 128 max-encryption = 256 /etc/sasl2/svn.conf: pwcheck_method: auxprop auxprop_plugin: sasldb sasldb_path: /etc/sasldb2 mech_list: DIGEST-MD5 Then I add new users via: saslpasswd2 -c -f /etc/sasldb2 -u ABC dacracot But for instance OSX users get this error trying to check out: $ svn co svn://svn.nowhere.org/QRpage svn: Cannot negotiate authentication mechanism

  Read the article

• How much traffic a linux-based shaper would be able to chew

  - by facha

  Hi, everyone I have a linux based traffic shaper (iptables + tc htb policy). It works in bridge mode. Shapes traffic based on IPs and ports (there are about 100 rules in the "mangle" chain of iptables). Right now its throughoutput is about 100 mb/s (I don't remember pps, there are about 800 users in the network). Just was wondering - when I will hit the limit. How much traffic could a linux-based shaper possibly get throuhg it. If you have one under heavy load, please could you write what machine you use and what load there is. Or if you have any other info about the subj, please write as well. Thanks in advance.

  Read the article

• Manual Duplex for Mac (and/or Linux)

  - by chris_l

  Hi, my printers don't support automatic duplex printing. I'm looking for a solution for my Mac (BTW, also for Linux) that I've seen with most Windows printer drivers: Check "Manual duplex" in the printer screen Printer starts printing one side A dialog appears, asking me to flip the pages Printer prints the other side. One thing I can do, is "print odd pages", then reopen the dialog and "print even pages", but this is very inconvenient, especially when I only want to print a certain page range of the document (the Mac dialog forgets my previous page range every time). It gets even more inconvenient, when printing 2-up double sided, or when changing additional settings for this one printout. So is there maybe some tool, that can do this? Or maybe a "virtual printer driver" that can sit somewhere between the dialog and the actual printer driver, which manages these steps? (The Windows tool http://en.wikipedia.org/wiki/FinePrint can do something like that, but I don't need all of its features - and I need it on Mac/Linux) Thanks, Chris

  Read the article

• OpenVPN - Ubunut 10.04 - Client Can't Connect to Server - Linux Route Add Command Failed

  - by nicorellius

  I suppose this could be asked on Server Fault as well, but it is specific to the client so I thought I'd start here. I have keys for a OpenVPN server already in place. I have used these keys to connect already, but using a Windows XP machine. I started by building the client.conf file so that I could run: sudo openvpn --config client.conf And it seems correct but I still can't connect and get these errors and lines of output: Mon May 31 14:34:57 2010 ERROR: Linux route add command failed: external program exited with error status: 7 Mon May 31 14:34:57 2010 /sbin/route add -net 10.8.0.1 netmask 255.255.255.255 gw 10.8.0.17 SIOCADDRT: File exists Mon May 31 14:34:57 2010 ERROR: Linux route add command failed: external program exited with error status: 7 Mon May 31 14:34:57 2010 Initialization Sequence Completed I searched the net for forums and ideas and tried some file moving and renaming but still ended up in the same place.

  Read the article

• Starting SQLPlus in linux

  - by sandos

  How do you start sqlplus in linux? I know this is a service in windows.

  Read the article

• use of tcp_delack_min on redhat linux (kernel 2.6.18)

  - by user41466

  Hello, we're moving from Solaris to Redhat Linux, and trying to duplicate our low-latency setup, that, on solaris, includes the ndd settings related to TCP NO DELAY, and NAGLE ALGORITHM. I got the impression that those parameters are not all configurable system-wide, but still found some info. we have configured our applications to run with no nagle algorithm, but that is not sufficient. we have found an interesting RH article talking presenting the tcp_delack_min parameter, however, when browsing /proc/sys/net/ipv4/ , I can't find it there. would it be safe to assume that simply "adding" the parameter as it's said on the doc would be enough, or rather that the option is not supported by this version (would be strange, as RH specify that it "can be performed on a standard Red Hat Enterprise Linux installation") ? any other idea / recommendation to improve latency further ? thanks

  Read the article

• using Linux vncviewer

  - by Darkoni

  Hi ! when i am connecting to VNC server using wine on linux $ wine vncviewer.exe i have to enter: VNC Server: 1.1.1.21 Proxy/Reapeter: 195.29.18.33:1234 and then, when i connect, on top there is txt: 1.1.1.21:5900 (195.29.18.33:1234) mine question is: how to connect using vncviewer ? what to put in VNC_VIA_CMD ? $ export xlocalPort=1234 $ export xremoteHost=1.1.1.21 $ export xremotePort=5900 $ export xgateway=195.29.18.33 $ export VNC_VIA_CMD="/usr/bin/ssh -f -L $xlocalPort:$xremoteHost:$xremotePort $xgateway sleep 20" $ vncviewer $xremoteHost -via $xgateway and i get error: unable connect to socket: Connection refused (111) i was trying to help myself with page http://www.tightvnc.com/vncviewer.1.php Please help, couse i need to use "native" linux vncviewer installed by $ yum install tigervnc tigervnc.i686 0:1.0.90-0.13.20100420svn4030.fc13 Thnx

  Read the article

• Solaris to Linux conversion: Use VxFS or GFS?

  - by w00t

  We're a Solaris shop looking at RedHat Enterprise Linux and one of the things we're wondering is if we should keep Veritas Volume Manager + FileSystem or go with LVM+ext3 or RedHat's preferred cluster filesystem solution, GFS. One of the things we like about Veritas is that it can use Veritas Volume Replicator to have a remote copy of important filesystems. This functionality seems to be missing from RedHat, DRBD doesn't seem to be packaged in RHEL... So my questions are: Does anybody use VxFS/VxVM/VVR on Linux? Thoughts, experiences? Comparison with LVM+ext3? Anybody using GFS? Thoughts, experiences? Do you do remote replication for disaster recovery, and if so, how? Is there a standard RedHat way?

  Read the article

• Trouble migrating Joomla from Linux to Windows server

  - by Matt

  I'm having some trouble migrating a Joomla website from a Linux server to a Windows server. The database came over fine, Besides that, all I've done is download all the files from the current site, and change configuration.php so the log and tmp directories show "./tmp/" and "./logs/" I keep having an error in the PHP log stating PHP Fatal error: Class 'JTable' not found I've downloaded the site multiple times now, and I'm convinced this is a configuration problem, and not a missing file problem. I've even tried installing a mod for backup on the linux box to try and migrate the site, but sadly the mod had problems installing. The new server is running IIS 7.5 on Windows Web Server. PHP 5.2.14 and MySQL

  Read the article

• GRUB Error after Deleting Linux Partition

  - by Nironan12

  I was dual-booting with Windows 7 and Windows Vista each taking up half of my hard drive. In Windows 7 I used Easeus Partition Manager to shrink my Windows 7 volume 8GB. On the unallocated space, I installed Linux Mint 8 RC1. After a little bit of playing around with it, I booted in Windows 7, used EPM again and deleted the 8GB Linux partition. I then extended Windows 7 on the 8GB. After restarting my computer, all I get is a black screen and this: GRUB loading. error: no such partition grub rescue> I do not have a Windows 7 disk nor does my computer come with Startup Repair. What do I do?

  Read the article

• Configuring Linux Network

  - by Reiler

  Hi I'm working on some software, that runs on a Centos 5.xx installation. I'ts not allowed for our customers to log in to Linux, everything is done from Windows applications, developed by us. So we have build a frontend for the user to configure network setup: Static/DHCP, ip-address, gateway, DNS, Hostname. Right now I let the user enter the information in the Windows app, and then write it on the Linux server like this: Write to /etc/resolv.conf: Nameserver Write to /etc/sysconfig/network: Gateway and Hostname Write to /etc/sysconfig/network-scripts/ifcfg-eth0: Ipaddress, Netmask, Bootproto(DHCP or Static) I also (after some time) found out that I was unable to send mail, unless I wrote in /etc/hosts: 127.0.0.1 Hostname All this seems to work, but is there a better/easier way to do this? Also, I read the network configuration nearly the same way, but if I use DHCP, I miss som information, for instance the Ip-address. I know that I can get some information from the commandline (ifconfig), but I dont get for instance Hostname, Gateway and DNS. Is there a commandline tool that will display this?

  Read the article

• Linux compilers for C/C++ on AMD "Bulldozer" CPUs like the Interlagos [closed]

  - by jstarek

  I am looking for a Linux compiler for C/C++ code that supports AMDs new "Bulldozer" architecture and produces efficient binaries for the Interlagos series Opterons. This seems to be a bit difficult because of the peculiarities of the Bulldozer microarchitecture. While AMD has a whitepaper with some details, I would like to see some independent analyses. The relevant paper from HeCToR focuses mostly on job placement and scheduling, which is an area we already investigate. So, who can recommend a good compiler comparison for Bulldozers running Linux? Does anyone have well-described benchmarks?

  Read the article

• Easiest way to change document root for XAMPP(Linux)

  - by alfredwesterveld

  The easiest way to change document root from /opt/lampp/htdocs to /home/alfred/htdocs for XAMPP(linux) in a step by step guide?

  Read the article

< Previous Page | 427 428 429 430 431 432 433 434 435 436 437 438  | Next Page >