mr nothing - Page 431 - Developer IT

Sparc v440 unable 2 boot after recommended patch install

- by user100660

After installing the October 2011 recommended patch bundle on a Solaris 10 the host fails to boot. The output is {0} ok boot SC Alert: Host System has Reset screen not found. keyboard not found. Keyboard not present. Using ttya for input and output. Sun Fire V440, No Keyboard Copyright 1998-2003 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.10.10, 8192 MB memory installed, Serial #54744555. Ethernet address 0:3:ba:43:55:eb, Host ID: 834355eb. Rebooting with command: boot Boot device: /pci@1f,700000/scsi@2/disk@0,0:a File and args: \ Evaluating: Out of memory Warning: Fcode sequence resulted in a net stack depth change of 1 Evaluating: Evaluating: The file just loaded does not appear to be executable. {3} ok If I do a boot -F failsafe the host come up and I'm able to mount the root device (ufs on /dev/dsk/c1t0d0s0) and nothing appears broken, i.e I can see the logfiles from the patch install etc. Root device still have 1GB+ free. Only 2 kernel patches was installed from the patch bundle: 144500-19 & 147440-02. Any hints how to debug it further, etc.

Read the article

IIS 7.0 404 Custom Error Page and web.config

- by Colin

I am having trouble with a custom 404 error page. I have a domain running a .NET proj with it's own error handling. I have a web.config running for the domain which contains: <customErrors mode="RemoteOnly"> <error statusCode="500" redirect="/Error"/> <error statusCode="404" redirect="/404"/> </customErrors> On a sub dir of that domain I am ignoring all routes there by doing routes.IgnoreRoute("Assets/{*pathInfo}"); in the .NET proj and I want to put a custom 404 error page on that and any sub dir's of Assets. The sub dir contains static content like images, css, js etc etc. So in the Error Pages section of IIS I put a redirect to an absolute URL. The web.config for that dir looks like the following: <system.webServer> <httpErrors> <remove statusCode="404" subStatusCode="-1" /> <error statusCode="404" prefixLanguageFilePath="" path="http://mydomain.com/404" responseMode="Redirect" /> </httpErrors> </system.webServer> But I navigate to an unknown URL under that dir and yet I still see the default IIS 404 page. I am also seeing an alert in IIS that reads: You have configured detailed error messages to be returned for both local and remote requests. When this option is selected, custom error configuration is not used. Does this have anything to do with the customErrors mode="RemoteOnly" in the site web.config? I have tried to overwrite the customErrors in the sub dir web.config but nothing changes. Any help would be appreciated. Thanks.

Read the article

Ubuntu Postfix Gmail SMTP Relay Not Working

- by Nick DeMayo

I currently have postfix set up to relay messages from my websites through gmail, and up until recently it was working perfectly. However, within the last week or so (not really sure when) I started getting the below error whenever attempting to send an email: Jul 20 07:40:46 localhost postfix/smtp[11958]: connect to smtp.gmail.com[2001:4860:800a::6c]:587: Network is unreachable Jul 20 07:40:46 localhost postfix/smtp[11958]: connect to smtp.gmail.com[173.194.76.109]:587: Connection refused Jul 20 07:40:46 localhost postfix/smtp[11958]: connect to smtp.gmail.com[173.194.76.108]:587: Connection refused Here is my configuration file: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h #readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = [my domain name] alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases #myorigin = /etc/mailname mydestination = [my host name], localhost.localdomain, localhost relayhost = [smtp.gmail.com]:587 mynetworks = 127.0.0.0/8 mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = loopback-only inet_protocols = all ########################################## ##### non debconf entries start here ##### ##### client TLS parameters ##### smtp_tls_loglevel=1 smtp_tls_security_level=encrypt smtp_sasl_auth_enable=yes smtp_sasl_password_maps=hash:/etc/postfix/sasl/passwd smtp_sasl_security_options = noanonymous ##### map username@localhost to [email protected] ##### smtp_generic_maps=hash:/etc/postfix/generic Nothing changed on my server, as far as I know...any ideas what could have caused it to stop working?

Read the article

How to perform SCP as a Sudo user

- by Ramesh.T

What is the best way of doing SCP from one box to the other as a sudo user. There are two servers Server A 10.152.2.10 /home/oracle/export/files.txt User : deploy Server B 10.152.2.11 /home/oracle/import/ User : deploy Sudo user : /usr/local/bin/tester all i want is to copy files from server A to Server B as a sudo user... In order to do this, first i normally login as deploy user on the target server and then switch as a sudo user without password. after that SCP to copy file, this is the normal way i perform this activity... In order to auotmate i have written script #!/bin/sh ssh deploy@lnx120 sudo /usr/local/bin/tester "./tester/deploy.sh" I have generated the private key for deploy user, so it allows me to login as deploy user without password. afterthar the sudo command is executed it will switch the user to tester... after that nothing happens.. i mean the script is not getting executed ... is there any way to accomplish this in a different way...

Read the article

Ubuntu 12.4 compiz - disable all compiz plugin - empty screen

- by gotqn

A friend of mine has installed on my new machine Ubuntu 10.4 (I have always been windows user and have no experience with Linux). I started to watch some tutorial about how to make 'Rotated Cube' using 'Compiz',but the cube appears in the form of a list (only two slides). I have thought this could be result of my video cards (only two - one from the processor and one from the motherboard) and they can not support this options. Anyway, I have decided to disable all compiz plugins and options because my friend has set some, and I started to think there is some misunderstanding between the plugins. After, that I got only empty screen(no menu, no icons, anything) and can do nothing. How to fix this? EDIT: When I remove the compiz stuffs (from the console), the menu is shown again. Then I install the compiz again (some of the effect are still not working). After restart or log out/in the menu is hidden again. I suppose that there are some settings that I've broken but they are saved somewhere in the system and remove the compiz do not deleted them and as a result they are activated after compiz is installed again and the PC is restarted?

Read the article

Kate gives out debug messages on the console from which it is started

- by Elan

I am new to Linux. I use Ubuntu 11.04. Whenever I open a file with kate from the commandline, with 'kate &' (or without ampersand), Kate starts out giving messages on the console. It continuously gives them out as I save a file or close one. They look like debug messages to me (sample below). I have used Synaptic package manager to install Kate. Uninstalling and installing the dev version did not make any change. Soon my console becomes cluttered. Is there a way to suppress these messages? There was nothing explicit in Kate settings either. Thank you, The messages look like kate(13412)/kate-filetree KateFileTreeModel::handleInsert: BEGIN! kate(13412)/kate-filetree KateFileTreeModel::handleInsert: creating a new root kate(13412)/kate-filetree ProxyItem::ProxyItem: ProxyItem(0x1796840,0x0,-1,QObject(0x0) .... kate(13435)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x1eb7cf0,0x1eb6830,0,KateDocument(0x1d93ea0) , "Untitled" ) kate(13435)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN! kate(13435)/kate-filetree KateFileTreeModel::updateBackgrounds: END! kate(13435)/kate-filetree KateFileTreeModel::documentActivated: END! kate(13435)/kate-filetree KateFileTreePluginView::viewChanged: END! X Error: BadWindow (invalid Window parameter) 3 Major opcode: 20 (X_GetProperty) Resource id: 0x5601b42 X Error: BadWindow (invalid Window parameter) 3 Major opcode: 20 (X_GetProperty) Resource id: 0x5601b42

Read the article

PHP unable to load dynamic library... but it is loaded. WTF?

- by Josh

I have a CentOS 5.4 server with Apache 2.2.3, mod_fastcgi and PHP 5.2.11. Everything is working great, server is a production server and I've had no complaints. When I was looking in PHP's error log to diagnose a problem with a specific page, I saw the following periodically repeated over and over: [03-May-2010 19:54:12] PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/apc.so' - /usr/lib/php/modules/apc.so: undefined symbol: php_rfc1867_callback in Unknown on line 0 [03-May-2010 19:54:12] PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/pdo_mysql.so' - /usr/lib/php/modules/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce in Unknown on line 0 [03-May-2010 19:54:12] PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/apc.so' - /usr/lib/php/modules/apc.so: undefined symbol: php_rfc1867_callback in Unknown on line 0 [03-May-2010 19:54:12] PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/pdo_mysql.so' - /usr/lib/php/modules/pdo_mysql.so: undefined symbol: php_pdo_get_dbh_ce in Unknown on line 0 I am very confused because APC is loaded, I can see it in the output of phpinfo(). And by the look of these error messages nothing should be working at all. Yet sites seem to be running fine. How can I track down the source of this error?

Read the article

Create new folder for new sender name and move message into new folder

- by Dave Jarvis

Background I'd like to have Outlook 2010 automatically move e-mails into folders designated by the person's name. For example: Click Rules Click Manage Rules & Alerts Click New Rule Select "Move messages from someone to a folder" Click Next The following dialog is shown: Problem The next part usually looks as follows: Click people or public group Select the desired person Click specified Select the desired folder Question How would you automate those problematic manual tasks? Here's the logic for the new rule I'd like to create: Receive a new message. Extract the name of the sender. If it does not exist, create a new folder under Inbox Move the new message into the folder assigned to that person's name I think this will require a VBA macro. Related Links http://www.experts-exchange.com/Software/Office_Productivity/Groupware/Outlook/A_420-Extending-Outlook-Rules-via-Scripting.html http://msdn.microsoft.com/en-us/library/office/ee814735.aspx http://msdn.microsoft.com/en-us/library/office/ee814736.aspx http://stackoverflow.com/questions/11263483/how-do-i-trigger-a-macro-to-run-after-a-new-mail-is-received-in-outlook http://en.kioskea.net/faq/6174-outlook-a-macro-to-create-folders http://blogs.iis.net/robert_mcmurray/archive/2010/02/25/outlook-macros-part-1-moving-emails-into-personal-folders.aspx Update #1 The code might resemble something like: Public WithEvents myOlApp As Outlook.Application Sub Initialize_handler() Set myOlApp = CreateObject("Outlook.Application") End Sub Private Sub myOlApp_NewMail() Dim myInbox As Outlook.MAPIFolder Dim myItem As Outlook.MailItem Set myInbox = myOlApp.GetNamespace("MAPI").GetDefaultFolder(olFolderInbox) Set mySenderName = myItem.SenderName On Error GoTo ErrorHandler Set myDestinationFolder = myInbox.Folders.Add(mySenderName, olFolderInbox) Set myItems = myInbox.Items Set myItem = myItems.Find("[SenderName] = " & mySenderName) myItem.Move myDestinationFolder ErrorHandler: Resume Next End Sub Update #2 Split the code as follows: Sent a test message and nothing happened. The instructions for actually triggering a message when a new message arrives are a little light on details (for example, no mention is made regarding ThisOutlookSession and how to use it). Thank you.

Read the article

Xen dom0 reports incorrect amount of RAM with dom0_mem set

- by xen_amnesiac

I've done a fair bit of searching about this, but have found nothing that answers my question. I have a system with 6GB of RAM which acts as a Xen server. For reference, it runs Ubuntu 12.04. I've set the kernel parameter dom0_mem:512M,max:512M in /etc/default/grub as follows: GRUB_CMDLINE_XEN_DEFAULT="dom0_mem=min:512M,max:512M" I've tried variations of that, with the same result. My question is this: With the above set, the dom0 reports in all applications a RAM amount of 422M. cat /proc/meminfo gives the following: $ cat /proc/meminfo MemTotal: 432472 kB MemFree: 54144 kB Buffers: 17640 kB Cached: 220104 kB SwapCached: 30172 kB Active: 136500 kB Inactive: 167780 kB Active(anon): 6156 kB Inactive(anon): 60516 kB Active(file): 130344 kB Inactive(file): 107264 kB Unevictable: 52 kB Mlocked: 52 kB SwapTotal: 1794044 kB SwapFree: 1682012 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 39572 kB Mapped: 8048 kB Shmem: 136 kB Slab: 44324 kB SReclaimable: 22012 kB SUnreclaim: 22312 kB KernelStack: 1280 kB PageTables: 3840 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2010280 kB Committed_AS: 329192 kB VmallocTotal: 34359738367 kB VmallocUsed: 313988 kB VmallocChunk: 34359417340 kB HardwareCorrupted: 0 kB AnonHugePages: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 524696 kB DirectMap2M: 0 kB top, htop, free -m, and byobu's RAM monitor all report the same amount. At first I thought this was because of the onboard graphics borrowing some memory, but have now switched to a dedicated GPU and it persists. Is this normal behavior, or has something gone amiss? It's just about 100MB of RAM that's "gone", and I have no idea where it went. I understand that it's normal that not all RAM is available for allocation, but does the system really take an amount relatively high to the amount of RAM available?

Read the article

How to render remote assistance to a person using Live Messenger?

- by Cheeso

There is a feature within Windows Live Messenger v9 that allows a person to ask for remote assistance. BBut as I understand it, this works only if the router is UPnP enabled on both ends. Today I tried this with a friend during an active chat session, and nothing happened. I suspect a router problem. as I am remote, I cannot configure the router for them. What's a good way to render remote assistance? Here's the scenario: it will be based on invitation only (it's not a remote desktop or "logmein" situation). It's a younger person, a computer novice, on the other end of the wire. I'll be assiting with their use of applications on the PC. I'd l ike to be able to SEE the screen, and also use the mouse and keyboard. I have used Ultra-Vnc on the target machine and vncviewer on my machine, on a LAN. It works well. But I don't think I can use that, because it's my kids' computer in my ex-wife's place, and I don't want her to accuse me of spying on her computer. That's why I need it to be invitation only. Advice please. Is there an easy way for me to set up Remote Assistance? IS there some other tool I can use?

Read the article

stunnel client uses improper SNI when talking to Apache

- by Huckle

I have stunnel listening on port 80 and acting as a client connecting to Apache listening on port 443. Configuration is below. What I'm finding is that if I attempt to connect to localhost:80 the connection is fine but if I connect to 127.0.0.1:80 When I check Apache's logs it indicates that stunnel is using localhost as the SNI both times, but the HTTP request lists localhost in one case and 127.0.0.1 in another. Is it possible to tell stunnel to either use whatever is in the HTTP request or to somehow configure two clients each with different SNI values? stunnel.conf: debug = 7 options = NO_SSLv2 [xmlrpc-httpd] client = yes accept = 80 connect = 443 Apache error.log: [error] Hostname localhost provided via SNI and hostname 127.0.0.1 provided via HTTP are different Apache access.log: "GET / HTTP/1.1" 200 2138 "-" "Wget/1.13.4 (linux-gnu)" "GET / HTTP/1.1" 400 743 "-" "Wget/1.13.4 (linux-gnu)" wget: $wget -d localhost ---request begin--- GET / HTTP/1.1 User-Agent: Wget/1.13.4 (linux-gnu) Accept: */* Host: localhost Connection: Keep-Alive ---request end--- $wget -d 127.0.0.1 ---request begin--- GET / HTTP/1.1 User-Agent: Wget/1.13.4 (linux-gnu) Accept: */* Host: 127.0.0.1 Connection: Keep-Alive ---request end--- edit: Apache Config Nothing out of the ordinary, it's just a virtual host listening to 443 <VirtualHost *:443>

Read the article

Migrating to Amazon AWS etc: What key statistics/questions should be analyzed and asked?

- by cerd

I searched SOverflow pretty extensively for something similar to this set of questions. BACKGROUND: We are a growing 'big(ish)' data chemical data company that are outgrowing our lab and our dedicated production workhorses. Make no mistake, we need to do some serious query optimization. Our data (It comes from a certain govt. agency so the schema and lack of indexing is atrocious). So yes, I know, AWS or EC2 is not a silver bullet in the face of spending time to maybe rework your queries/code entirely 'out of the box'. With that said I would appreciate any input on the following questions: We produce on CentOS and lab on Ubuntu LTS which I prefer especially with their growing cloud / AWS integration. If we are mysql centric, and our biggest problem is these big cartesian products that produce slow queries, should we roll out what we know after more optimization with respect to Ubuntu/mySQL with the added Amazon horsepower? Or is there some merit to the NoSQL and other technologies they offer? What are the key metrics I need to gather from apache and mysql other than like: Disk I/O operations, Data up/down avgs and trends and special high usage periods/scenarios? I've reviewed AWS/EC2 fine print, but want 2nd opinions. What other services aside from the basic web/database have proven valuable to you? I know nothing of Hadoop or many other technologies they offer, echoing my prev. question, do you sometimes find it worth it (Initially having it be a gamble aside from basic homework) to dive/break into a whole new environment and try to/or end up finding a way of more efficiently producing your data/site product? Anything I should watch out for in projecting costs, or any other general advice when working with AWS folks from anyone else where your company is very niche and very very technical (Scientifically - or anybody for that matter)? Thanks very much for your input - I think this thread could be valuable to others as well.

Read the article

What causes "A disk read error occurred, Press Ctrl + Alt + Del to restart"?

- by Mehrdad

I have a virtual machine containing Windows XP SP3. When I resized the VHD file (and the embedded partition), and tried booting, I got: A disk read error occurred Press Ctrl + Alt + Del to restart Some notes: FixBoot and FixMBR don't help. ChkDsk doesn't help. The partition is indeed active. The partition starts at sector 63 (it also did so before the problem) of cylinder 1, head 1, and is marked as type 0x07 (NTFS) My host OS reads the VHD and the partition completely fine I'm interested in knowing the cause rather than the fix. So "re-format the disk", "reinstall Windows", etc. aren't valid solutions. It's a virtual machine after all... I have nothing to lose, so I don't care about fixing it. I just want to know what's causing this problem, in case I run into it again on a physical machine (which I have done before). More info: The layout of the original, dynamic VHD (which works correctly): +-----------------------------------------------------------------------------+ ¦ Disk: 3 MBR/GPT: MBR ¦ ¦ Size: 127.00GB CHS: 16578 255 63 ¦ ¦ Sectors: 266338304 Disk Signature: 0xEE3EEE3E ¦ ¦ Partitions: 1 Partition Order: 1 ¦ ¦ Media Type: Fixed Interface: SCSI ¦ ¦ Description: Msft Virtual Disk ¦ +-----------------------------------------------------------------------------¦ ¦Pos Idx Type/Name Size Boot Hide Start Sector Total Sectors DL Vol Label ¦ +--- --- --------- ---- ---- ---- -------------- -------------- -- -----------¦ ¦ 1 1 07-NTFS 1.5G Yes No 63 3,148,677 F: <None> ¦ +-----------------------------------------------------------------------------+ The layout of the resized, fixed-size VHD (which doesn't work): +-----------------------------------------------------------------------------+ ¦ Disk: 3 MBR/GPT: MBR ¦ ¦ Size: 1.50GB CHS: 196 255 63 ¦ ¦ Sectors: 3149824 Disk Signature: 0xEE3EEE3E ¦ ¦ Partitions: 1 Partition Order: 1 ¦ ¦ Media Type: Fixed Interface: SCSI ¦ ¦ Description: Msft Virtual Disk ¦ +-----------------------------------------------------------------------------¦ ¦Pos Idx Type/Name Size Boot Hide Start Sector Total Sectors DL Vol Label ¦ +--- --- --------- ---- ---- ---- -------------- -------------- -- -----------¦ ¦ 1 1 07-NTFS 1.5G Yes No 63 3,148,677 F: <None> ¦ +-----------------------------------------------------------------------------+

Read the article

Why won't Google Chrome install on my Windows 7?

- by quakkels

I can tell something is wrong with my computer. A little history: Google Chrome was not running correctly. When i was using facebook, any link on face that ran an ajax javascript function would not work. No error was being thrown, it just wasn't working. I uninstalled Chrome and reinstalled it. On re-install, a toolbar automatically installed with Chrome. BitTorrentBar. I did not install BitTorrentBar, it installed on it's own. Bad. When BitTorrentBar was active, then ajax functions on facebook worked. When I deactivated or uninstalled BittorrentBar from Chrome extensions, then ajax stopped working. I ran scanned the computer with Avast (free version) and SpyBot Search and Destroy (also free). They found nothing wrong. I uninstalled Chrome using Control Panel and then I went through my file system deleting anything that had "google", "BitTorrent", "chrome", or "conduit". Conduit seems to distribute BitTorrentBar. After doing all that, I tried to reinstall Chrome. I got this error: System.ComponentModel.Win32Exception: The system cannot find the file specified at System.Diagnostics.Process.StartWithShellExecuteEx(ProcessStartInfo startInfo) at System.Diagnostics.Process.Start() at System.Diagnostics.Process.Start(ProcessStartInfo startInfo) at ClickOnceBootStrap.ClickOnceEntry.Main() This error interupts the Chrome install every time! computer scans don't show anything wrong. So then, I thought this might be a .net framework error. Perhaps I deleted something I wasn't supposed to. So I reinstalled .NET Framework 4 and checked the repair option. I also ran Windows Updates. When I tried to download Chrome, again I got the same error as listed above. What should I do?

Read the article

Making the iPhone work with stripped down Windows XP

- by Gabriel

Hi, this is my first time posting here and I have a really specific question. I have an ASUS eee 901 running Windows XP Home. I had everything working well, but then I decided to improve performance by moving Windows to the smaller but faster internal SSD. I used Nlite to strip down Windows, following the instructions here: http://wiki.eeeuser.com/howto:nlitexp I now have a very lightweight installation of XP home with SP3 and all the current updates. Almost everything is working really well. I have installed iTunes and I CAN sync with no problems. However, each time I plug in my iPhone 3GS (latest firmware), Windows tries and fails to install drivers. The Found New Hardware Wizard launches, but nothing I do will make it complete successfully, with the result that the iphone does not show up in Windows as removable storage, or as a camera. When I launch the Camera and Scanner Wizard, it shows only my webcam, not the iphone. I have verified that I have the following files in place: Windows\System32\ptpusb.dll (regsvr32 successful) Windows\System32\ptpusd.dll (entry point not found, can not be registered) Windows\System32\usbaaplrc.dll (entry point not found, can not be registered) Windows\System32\drivers\usbaapl.sys Windows\System32\drivers\usbscan.sys Windows\System32\drivers\usbstor.sys Does anyone know if some other file is required or if there's some other element preventing this from working? Edit (From posted answer) I did select Cameras & Camcorders, and my webcam is working fine for video & still capture.

Read the article

Unable to boot with Windows 2008 DVD / USB Key

- by r0ca

Hi everyone, I am trying to install Windows 2008 server on a HP Proliant DL180 G5. There is no built-in DVD reader so I need to use my LaCie USB one. When I put the CD in and boot from the USB DVD on the server, I get the error message: Boot Failed! Please insert boot media in selected boot device. So I tried with another Windows bootable CD and still no luck. What I've done then, I copied the installation DVD on my 16go USB key. Again, impossible to boot from the USB Key. I have 2 147go SAS 15k HDD on my server. They are not showing in the Bios. I was wondering if this is a reason why nothing will boot on it. I am trying to find a way to deploy Windows 2008 server on my HP server as soon as possible. If you guys have ideas, feel free to let me know :) Best regards, David. System Information: HP Proliant DL180 G5 Quad-Core 2.5 4GO Ram 2x 147GO SAS 15k P.S. This is my first installation ever on SAS/SCSI HDD. Thanks a bunch! Edit: Well, my bad! I purchased a new USB DVD and now I can install Windows 2008 server. Thanks a bunch for your help!

Read the article

WAMP server not starting and a mystery service is using port 80

- by David Gard

I'm using WAMP on Windows 7 and tonight I'm unable to start it (it's been working fine for about 3 years previously). I first checked the logs, but nothing in there. So I checked the Windows Event Viewer (eventvwr), where I saw 2x errors for each attempted start - The Apache service named reported the following error: (OS 10048)Only one usage of each socket address (protocol/network address/port) is normally permitted. : make_sock: could not bind to address 0.0.0.0:80. The Apache service named reported the following error: no listening sockets available, shutting down. After this, I opened the command prompt and ran netstat -a, and to my surprise there were 3 entries for port 80 - Prot Local Address Foreign Address State TCP 127.0.0.1:80 MyPCName:53831 TIME_WAIT TCP 127.0.0.1:80 MyPCName:57834 TIME_WAIT TCP 127.0.0.1:80 MyPCName:57839 TIME_WAIT From here, I'm kind of lost. As far as I can tell, something is utalising port 80, but I don't know what or why. If anyone is able to suggest what I might do next I'd be most greatful. Thanks.

Read the article

ASUS P8B WS - Endless Reboots

- by tuxGurl

I am running a Intel XEON 1245 with 4GBx2 Kingston Memory ECC Unbuffered DDR3 on an ASUS P8B WS motherboard. BIOS Version 0904 x64. This system is a little over a month old. It is running Ubuntu 11.10. This evening I found the machine turned off. When I tried to restart it, it would POST and stop at the GRUB screen. When I selected Ubuntu and hit enter within 2-3 seconds the would shutdown and restart. If I stayed at the GRUB screen and did nothing the system would not cut out. I tried booting off a USB stick and again 2-3 seconds after selecting 'Try Ubuntu without Installing' the machine will cut power and reboot. Things I have tried so far: Resetting the BIOS using the on board jumper Resetting the BIOS settings to default Disconnecting all external hardware - except keyboard & monitor Booting with 1 stick of RAM - I tried different single sticks Ensured that onboard EPU and GPU boost switches are in the off position. I am running a Memtest86 right now and it has been running for 38+ minutes. This is not an OS problem or an overheating issue (I have a CoolerMaster HAF Case with 3 fans besides the CPU fan) I am at a loss as to what to try next. I think the BIOS is mis-configured somehow but I don't know what to look for.

Read the article

Computer does not switch on after power outage

- by cristian

VOLTAGE DROP OFF FOR PC does not restart The other day my pc was turned off due to power outage. Since that time the computer would not turn on again, no sign of life, it seems dead. I did several tests, changed the power outlet and disconnect the wires ... also I have reseated the cards ... but the result is that nothing changes. What can I do? Could there may be damage to the hardware due to the power outage? Note: the voltage drop is not due to a lightning storm and so is not due to damaged components (burnt card etc ...) Original Text: l'altro giorno il pc mi si è spento improvvisamente per calo tensione.... da quel momento non si è piu' riacceso...nessun segnale di vita...sembra proprio morto. Ho fatto diverse prove, cambio presa di alimentazione, scollegare i fili...insomma ho "mischiato le carte"...ma il risultato è che non cambia nulla. Cosa posso fare? cosa puo' essere successo? Possono esserci danni hardware per il calo di tensione? NB: il calo di tensione non e' dovuto ad una saetta e quindi escluderei danni causa temporale (bruciature scheda ecc...) Grazie mille

Read the article

Compaq R4000 laptop randomly locking up

- by Josh

I have a Compaq R4000 laptop with 2GB of RAM, running Ubuntu Linux 9.10. It is randomly locking up on me, approximately once every two days. I have a second partition with Windows XP Home installed, and I have had the system lock up in XP as well, meaning I believe this is a hardware issue. I have run two passes of Memtest86+ with no errors. The system has a fan that has died, so I initially suspected overheating. However the system just locked up on me while I was in the middle of typing a script to warn me / shut down if the temperature was too high. When the lockup happened the temperature was 88°F, so I am now starting to believe that may not be the issue. When the system locks up, I cannot SSH in nor ping it. Nothing shows in syslog when I reboot. I have configured it to send syslog messages to a local server as well and no messages appear on that server when the lockup happens. I am open to any and all advice!

Read the article

WHS - Windows Update Failure

- by Kyle B.

Clicking "Update Now..." inside my EX470 control panel for Windows Update produces the following error message: "Windows Home Server updates installation can not complete. Please try again later. If the problem persists, please restart the server." I have rebooted the server numerous times, and I have also used remote desktop to connect to the machine to perform the update this way, however the browser is unable to pull up http://windowsupdate.microsoft.com. This is very strange behavior because I am able to access all other sites (gmail.com, serverfault.com, etc). Would it be possible for someone to explain to me how I can check to see what is blocking the connection of this device, which apparently has a valid internet connection, to the Microsoft Windows Update site? note #1 Using the shortcut: %SystemRoot%\system32\wupdmgr.exe does not work either. It says "Connecting to 65.55.200.155..." but nothing ever happens. This is strange because all other sites seem fine. Also, I can connect to windowsupdate.microsoft.com on my local desktop so I know this is running as well

Read the article

mysqld causes high CPU load

- by Radu

Read the article

Are HDMI to VGA Adapters Really Device-Specific?

- by allquixotic

There are a lot of devices on the market right now (especially mobile devices) with a Micro-HDMI or Mini-HDMI port and no VGA or D-Sub output. Most manufacturers of said devices sell a cable that looks something like this: I have yet to find a cable like this that claims to work on a wide array of devices. In general, these cables claim to work with one specific device only. The way these cables work, I think, is that analog VGA signals are sent from the HDMI port on the device. This should work for devices that have special hardware on the motherboard/GPU capable of driving this. Is it the case that these cables have to be custom designed for each device? Or, is it rather that any device which possesses this special "signaling of analog VGA over the HDMI port" can be made to work with a cable that is physically compatible (i.e. the HDMI end plugs into the device and the VGA end accepts a VGA monitor cable)? Note that I am not looking for a product recommendation, just a conceptual clarification on what exactly these devices are doing. Also, a few remarks: The cables like the one depicted here are not digital to analog converters. I know about these: they are expensive, and they are the ONLY solution if your device only outputs a digital signal and is incapable of driving analog VGA over the HDMI port. The cables like the one depicted here are not straight crossover cables from VGA to HDMI, either. The crossover cables are designed to send a digital HDMI signal over the VGA port's wires; that is, the wire protocol is HDMI (digital) but the physical pinout is the same as VGA, even though nothing analog is happening. Once again, this is not the behavior that, I believe, the devices which I'm talking about in this question are doing. The cabling and devices that this question is about transmit the analog VGA data over the HDMI port (the HDMI port is in the device outputting the data, and the VGA side is the monitor/projector).

Read the article

Error opening hyperlinks in Excel 2003

- by richardtallent

When clicking to follow hyperlinks from Excel, I'm now getting this error: Unable to open http://blah... Cannot download the information you requested. The hyperlinks in the Excel file are created using the HYPERLINK() formula. I use Google Chrome as my default browser. The web site in question uses Basic Authentication, and I've entered correct credentials when prompted (the dialog looked like an IE auth box, not Chrome's, but it's always been that way, even when it was working properly). This hasn't been an issue until recently. I'm guessing our IT department made some lame change to IE's configuration that is causing Office to not be able to open the URLs, despite having Chrome as my browser. Things I've checked already: URLs are good, they work fine when pasted manually into Chrome, IE, or Firefox. IE is not set to Work Offline (already found that suggestion on Google). I checked Program Access and Defaults and verified that Chrome is selected. Nothing in the URL requires URLEncoding, so it's no goofy issue with encoding I've had reports from some other users now and then about the same problem, but this is the first time I've experienced it myself.

Read the article

Juniper router dropping pings to external interface

- by Alexander Garden

My organization has a Juniper SSG20-WLAN that routes our traffic to the outside world. We've been having intermittent problems with our internet connection so I wrote up a Python script to ping the internal interface of the router, the external interface, a couple of our internal servers, the ISP router our router talks to, their upstream provider, and Google and Yahoo for good measure. It does that about every minute. What I have found is that when our internet goes out, our Juniper router ceases responding to pings on the external interface. Everything past that is, of course, unreachable. The internal interface and our internal servers continue to echo back without interruption. None of the counters indicate dropped packets of any type. They all look normal. The logs complain about VIP servers being unavailable but otherwise nothing indicative of network issues. My questions are these: Does this exonerate our ISP? Or, contrawise, might a problem with the connection be causing the external interface to go down? Is there somewhere else in the SSG20, beside the system log and counters, that might help me track down info on the problem? UPDATE: Turned out that one of the switches between my monitoring box and the router was a router itself, and occasionally diverting from the gateway to itself. Kudos to those who made suggestions along those lines. Not really sure which answer to mark as accepted, as it was really stuff in the comments that turned out to be right. Thanks for the suggestions.

Search Results

Search found 16021 results on 641 pages for 'mr nothing'.

Page 431/641 | < Previous Page | 427 428 429 430 431 432 433 434 435 436 437 438 | Next Page >

- by user100660

- by Colin

- by Nick DeMayo

- by Ramesh.T

- by gotqn

- by Elan

- by Josh

- by Dave Jarvis

- by xen_amnesiac

- by Cheeso

- by Huckle

- by cerd

- by Mehrdad

- by quakkels

- by Gabriel

- by r0ca

- by David Gard

- by tuxGurl

- by cristian

- by Josh

- by Kyle B.

- by Radu

- by allquixotic

- by richardtallent

- by Alexander Garden

< Previous Page | 427 428 429 430 431 432 433 434 435 436 437 438 | Next Page >