Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 432/1359 | < Previous Page | 428 429 430 431 432 433 434 435 436 437 438 439  | Next Page >

• Ubuntu crashes with menu bar launcher freeze during software centre use

  - by UbunUser

  I recently reinstalled Ubuntu 12.04 LTS on a Dell Studio 1588 64-bit and ran into crashes as I was installing some software on the software centre. Before this, I had display/screen problems that I needed to fix so I will briefly describe that in case it has any connection to the crashes. The problem was of screen crash/flickering (related to ATI Mobility Radeon HD 5400x) when trying to adjust brightness and so I followed guidance from an earlier chain (question 131967) to (a) use jockey to install fglrx update driver (deactivate experimental beta driver) and (b) edit grub to add acpi_backlight=vendor dell_laptop.backlight=0 The crashes that happened (twice, while software centre was just finishing installation in the background) was that all tabs (on open Firefox window) stayed open along with cursor control with mousepad but all menu bars disappeared completely along with the launcher and the keyboard also turned unresponsive. So there seemed to be no way to close windows or shut down the computer except for a forced hard shut down of the system using the start button. This is very similar to Questions #167540 and #298843, which seem to be closed. Why is this happening? Is there some update or fix I need to make? Thanks!

  Read the article

• Why do I get "permission denied" errors with Python easy_install?

  - by ATMathew

  I'm an Ubuntu newbie and have been trying to install python's easy_install so that I don't have to deal with source files when install Python libraries. I"ve ran the following, and it seems to install the correct applications: sudo apt-get install python-setuptools However, when i run easy_install sqlalchemy or easy_install pysqlite3, it doesn't work. I get the following error message: install_dir /usr/local/lib/python2.6/dist-packages/ error: can't create or remove files in install directory The following error occurred while trying to add or remove files in the installation directory: [Errno 13] Permission denied: '/usr/local/lib/python2.6/dist-packages/test-easy-install-1674.pth' The installation directory you specified (via --install-dir, --prefix, or the distutils default setting) was: /usr/local/lib/python2.6/dist-packages/ Perhaps your account does not have write access to this directory? If the installation directory is a system-owned directory, you may need to sign in as the administrator or "root" account. If you do not have administrative access to this machine, you may wish to choose a different installation directory, preferably one that is listed in your PYTHONPATH environment variable. For information on other options, you may wish to consult the documentation at: http://packages.python.org/distribute/easy_install.html Please make the appropriate changes for your system and try again. Help! Abraham

  Read the article

• How do I add English-UK thesaurus in LibreOffice?

  - by Chethan S.

  I have been trying to use English-UK thesaurus in LibreOffice but so far cannot get it to work. I have installed mythes-en-us as only it was available in repos. As suggested in some forums I searched for openoffice.org thesaurus, but again US version was available. As a result I can't enable thesaurus when I choose English UK: As instructed elsewhere I tried this: cd /usr/share/myspell/dicts sudo ln -s th_en_US_v2.dat th_en_GB_v2.dat sudo ln -s th_en_US_v2.idx th_en_GB_v2.idx Still the result is same as shown in above screenshots. What can be done now?

  Read the article

• Confused about nova-network

  - by neo0

  I'm so sorry because this question doesn't related to Ubuntu. I asked in Openstack forum but this forum is not very active. So I think if someone have experience with Openstack Nova can help me with my problem. I've read some explanations about nova-network and how to configure it like this one from wiki: http://wiki.openstack.org/UnderstandingFlatNetworking I'm confusing about a detail. If every traffic from the instances must go through nova controller node, then why we still need the public interface for nova-compute node? Is it necessary? What happen when a request from outside to an instance. For example I have a controller node and a nova-compute node. In nova-compute node I run an instance with a Wordpress website. Then someone connect to the public IP of this instance. So the request go directly from router to the nova-compute node or from router to controller node then nova-compute node? Thank you!

  Read the article

• VLC doesnot play any file [ any video/.mp3] in local machine , closes when a file is opened

  - by hsemarap

  When I run vlc from terminal I get: In the VLC dialog box: Your input can't be opened: VLC is unable to open the MRL 'file:///media/Ent/movies/the%20mask.avi'. Check the log for details. In terminal: VLC media player 2.0.1 Twoflower (revision 2.0.1-0-gf432547) [0x8fe8f8] main input error: open of `file/xspf-open:///home/para/.local/share/vlc/ml.xspf' failed [0x8fe8f8] main input error: Your input can't be opened [0x8fe8f8] main input error: VLC is unable to open the MRL 'file/xspf-open:///home/para/.local/share/vlc/ml.xspf'. Check the log for details. [0x8f1aa8] main interface error: no suitable interface module [0x8f9b08] main interface error: no suitable interface module [0x8be008] main libvlc error: option http-user-agent does not exist [0x8be008] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface. [0x8f9b08] qt4 interface error: Unable to load extensions module [0x7f5280000b78] main input error: open of `file:///media/Ent/movies/the%20mask.avi' failed [0x8fc718] main playlist error: could not export playlist

  Read the article

• Why does Inkscape become unresponsive all of the sudden and how can I stop it from happening?

  - by klenwell

  I've just started using Inkscape in Ubuntu 11.10 and I'm not sure what exactly triggers it, but at some point, the Inkscape viewport becomes unresponsive. The viewport is still visible. I can still manipulate the window itself: move, resize, open menu items at top. The cursor switches style. But clicking on anything within the viewport has no effect. I must close the file and restart in order to regain control.

  Read the article

• How do I configure wvdial to connect using a micromax 353g usb modem?

  - by user72209

  I have Micromax 353g usb modem . M using Ubuntu 11.04... I installed wvdail nd configured wvdial.conf as [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = ATS7=60 S30=0 S0=0 Init4 = AT+CGDCONT=1,"aircelgprs.pr" Password = Aircel Phone = *99***# Modem Type = USB Modem Stupid Mode = 1 Baud = 7200000 New PPD = yes Dial Attempts = 1 Modem = /dev/ttyUSB2 ISDN = 0 Username = aircel aftr commanding wvdial it says --> WvDial: Internet dialer version 1.61 --> Initializing modem. --> Sending: ATZ --> Sending: ATQ0 --> Re-Sending: ATZ --> Modem not responding. unable to connect plz help

  Read the article

• /lib/i386-linux-gnu/libc.so.6 causing segmentation fault & session crash

  - by Fred Zimmerman

  I am having repeated and frequent crashes ending session whenever I take certain actions such as loading gmail under Chrome. Oddly, the same is not happening when I go to gmail under Chrome. After rooting around in /var/logs it appears to me that he trigger is something to do with libc.so.6 (see below). How can I fix this? 23936.947] [ 23936.947] Backtrace: [ 23936.948] 0: /usr/bin/X (xorg_backtrace+0x49) [0xb7745089] [ 23936.948] 1: /usr/bin/X (0xb75bf000+0x189d7a) [0xb7748d7a] [ 23936.948] 2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb759c40c] [ 23936.948] 3: /usr/bin/X (0xb75bf000+0xfade7) [0xb76b9de7] [ 23936.948] 4: /usr/bin/X (ValidatePicture+0x1d) [0xb76bcb8d] [ 23936.949] 5: /usr/bin/X (CompositePicture+0xc3) [0xb76bcc83] [ 23936.949] 6: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb6f18000+0xcf542) [0xb6fe7542] [ 23936.949] 7: /usr/bin/X (0xb75bf000+0x10b1d7) [0xb76ca1d7] [ 23936.949] 8: /usr/bin/X (CompositeGlyphs+0xc4) [0xb76b6d84] [ 23936.949] 9: /usr/bin/X (0xb75bf000+0x104956) [0xb76c3956] [ 23936.949] 10: /usr/bin/X (0xb75bf000+0xfe6f1) [0xb76bd6f1] [ 23936.949] 11: /usr/bin/X (0xb75bf000+0x3798d) [0xb75f698d] [ 23936.949] 12: /usr/bin/X (0xb75bf000+0x253ba) [0xb75e43ba] **[ 23936.950] 13: /lib/i386-linux-gnu/libc.so.6 (__libc_start_main+0xf3) [0xb721d4d3] [ 23936.950] 14: /usr/bin/X (0xb75bf000+0x256f9) [0xb75e46f9] [ 23936.950] [ 23936.950] Segmentation fault at address 0x155 [ 23936.950] Caught signal 11 (Segmentation fault). Server aborting [ 23936.950] Please consult the The X.Org Fou**ndation support at http://wiki.x.org for help. [ 23936.950] Please also check the log file at "/var/log/Xorg.0.log" for additional information.

  Read the article

• problem after login in wordpress site

  - by pankaj sharma

  I have installed WordPress first installation on Apache server Its opening fine but when i logged in with my user id and password http://examplesite.com/wp-login.php It is showing blank in Firefox and in IE page not open with no errors. I cleared all my browsers cache history still not able to open the page after login. There is no errors logs generated. wordpress version3.4.2 php 5.3.3 mysql 5.1.6

  Read the article

• Configuration of the network manager via DBus: how to set the ad hoc mode

  - by Andrea

  I have an hard nut to crack: a nice bottle of italian Chianti wine to the solver! :) To automatically configure Wifi, I first have to kill the network manager and than activate the wifi via the commandline: I do this all automatically in my application and works great. However... it is not the right way to do this. As the user has no network gui anymore to configure some other network access. A much better and transparent way would be to configure wifi directly via network manager over the DBus interface. I was able to configure it, but I wasn't able to set it to ad hoc mode... Searching the web for a while: a lot about configuration in general but nothing related to ad hoc mode. I think the only way to do figure that out is to look into the source code of the network manager...maybe someone already did it and he can answer.

  Read the article

• How do I get an Canon Pixma MP150 to print?

  - by Radu Erdei

  I succesfully installed my Canon Pixma MP150 printer (and scanner) in Ubuntu 12.04, made it the default printer, but i cannot print anything. Watching the printing queue, i see that the printer receives my documents but just for a few seconds after which the queue gets empty without anything getting actually printed. I tried to print from large pdf's to quite tiny txt files. I reinstalled the printer from cups web-based interface (127.0.0.1:631) but again, no luck. Any ideea on the matter?

  Read the article

• Why won't Ubuntu copy large files to FAT32 flash Drives?

  - by yurividal

  Since I installed 11.10 I am unable to copy large files (say 1gb or more) to ANY usb drive that is formated as FAT. The file starts copying, but soon an error appears, saying "Unable to Copy" . "Error splicing file: Input/output error". I am able to do it via terminal, using the cp command. I use Gnome3, but the same error has happened in Unity as well. Apparently it works if I format the USB drive as NTFS or EXT3, EXT4. But, for many appliances, FAT is necessary. The problem is also not with the USB port, because it works under Windows. It did not happen before, when I had 10.04 installed.

  Read the article

• Creating floppy drive special devices under Quantal

  - by JCCyC

  First, I'd like for the various special devices for different floppy capacities (like /dev/fd0u720 etc.) to be available. I tried to adapt some udev rules I found online. I tried this, which I saved as /etc/udev/rules.d/70-persistent-floppy.rules: # change floppy device ownership and permissions # default permissions are 640, which prevents group users from having write access # first fix primary devices (/dev/fd0, /dev/fd1, etc.) # also change group ownership from disk to floppy SUBSYSTEM=="block", KERNEL=="fd[0-9]*", GROUP="floppy", MODE="0660" # next recreate secondary devices (/dev/fd0u720, /dev/fd0u1440, etc.) SUBSYSTEM=="block", KERNEL=="fd[0-9]*", ACTION=="add", RUN+="create_floppy_devices -c -t $attr{cmos} -m %M -M 0660 -G floppy $root/%k" But to no avail. It seems the create_floppy_devices script isn't provided with 12.10. How do I obtain it? Second: I'm using MATE, and whenever I log in I get a message box saying it tried to mount the drive but failed. How do I disable this? Third (which is probably related to the second): Whenever there's a disk in the drive, the motor won't stop spinning. If I do a mdir of it, after it returns, the motor stops, and then starts again. I suspect there's some process in MATE doing this. UPDATE: For CentOS 6 (who does have a create_floppy_devices program) the following rules file worked. Saved as /etc/udev/rules.d/98-floppy.rules: # change floppy device ownership and permissions # default permissions are 640, which prevents group users from having write access # first fix primary devices (/dev/fd0, /dev/fd1, etc.) # also change group ownership from disk to floppy KERNEL=="fd[0-9]*", GROUP="floppy", MODE="0660" # next recreate secondary devices (/dev/fd0u720, /dev/fd0u1440, etc.) # drive A: is type 4 (1.44MB) - add other lines for other drives KERNEL=="fd0*", ACTION=="add", RUN+="/lib/udev/create_floppy_devices -c -t 4 -m %M -M 0660 -G floppy $root/%k"

  Read the article

• Use hotplug and turn on/off PCI device for replacing NIC

  - by Ryota Hashimoto

  How can I turn off the PCI slots and change the device (especially NIC) without shutting the server down? I found a similar question (How do I turn off PCI devices?) but there are no /sys/bus/pci/slot and no files in /sys/bus/pci/slots. I'm using 12.04 LTS. $ uname -a Linux d1-c1-r1-p1 3.2.0-38-generic #61-Ubuntu SMP Tue Feb 19 12:18:21 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux $ lspci | grep Eth 04:00.0 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 04:00.1 Ethernet controller: Intel Corporation I350 Gigabit Network Connection (rev 01) 09:00.0 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01) 09:00.1 Ethernet controller: Intel Corporation 82599EB 10-Gigabit SFI/SFP+ Network Connection (rev 01) $ ls /sys/bus/pci/ devices/ drivers_probe slots/ drivers/ rescan uevent drivers_autoprobe resource_alignment $ ls /sys/bus/pci/devices/0000\:04\:00.0/ broken_parity_status driver modalias rescan subsystem class enable msi_bus reset subsystem_device config firmware_node net resource subsystem_vendor consistent_dma_mask_bits irq numa_node resource0 uevent device local_cpulist power resource2 vendor dma_mask_bits local_cpus remove resource3

  Read the article

• Ubuntu 12.04 x64 LTS VPN Server not changing IP

  - by user288778

  I used this guide http://silverlinux.blogspot.co.uk/2012/05/how-to-pptp-vpn-on-ubuntu-1204-pptpd.html and it worked fine. I'm able to connect but the problem is, that my IP being changed to "localip" not "remote ip". This is what I get from tail -f /var/log/syslog [code] June 6 00:09:19 instant5860 NetworkManager[1456]: Unmanaged Device found; state CONNECTED forced (see http://bugs.launchpad.net/bugs/191889) June 6 00:09:19 instant5860 NetworkManager[1456]: Marking connection 'Wired connection 1' invalid. June 6 00:09:19 instant5860 NetworkManager[1456]: Activation (eth1) failed. June 6 00:09:19 instant5860 NetworkManager[1456]: Activation (eth1) Stage 4 of 5 (IPv4 Configure Timeout) complete. June 6 00:09:19 instant5860 NetworkManager[1456]: (eth1): device state change: failed - disconnected (reason 'none') [120 30 0] June 6 00:09:19 instant5860 NetworkManager[1456]: (eth1): deactivating device (reason 'none') [0] June 6 00:09:19 instant5860 NetworkManager[1456]: Unmanaged Device found; state CONNECTED forced. June----- avahi-daemon[440]: Withdrawing address record for fe80......... on eth1 Jun------avahi-daemon[440]: Leaving mDNS multicast group on interface eth1. IPv6 with address fe80..... Jun------avahi-daemon[440]: Interface eth1.IPv6 no longer relevant for mDNS. Jun------avahi-daemon[440]: Joining mDNS multicast group on interface eth1.IPv6 with address fe80.... Jun------avahi-daemon[440]: New relevant interface eth1.IPv6 for mDNS Jun------avahi-daemon[440]: Registering new address record for fe80..... on eth1.*. Jun - snmpd[1172]: error on subcontainer 'ia_addr' insert (-1) dbusp382]: [syste] Activating service name='org.freedesktop.PackageKit' (using servicehelper) AptDaemon: INFO: Initializing daemon AptDaemon.PackageKit: INFO: Initializing PackageKit compat layer dbus[382]: [system] Successfu;;y activated service 'org.freedesktop.PackageKit' AptDaemon.PackageKit: INFO: Initializing PackageKit transaction AptDaemon.Worker: INFO: Simulating trans: /org/debian/apt/transaction/233beca013a0473ea34d9dea805af5df AptDaemon.Worker: INFO: Processing transaction /org/debian/apt... AptDaemon.PackageKit: INFO: Get updates() AptDaemon.Worker: INFO: Finished snmpd[1172]: error on subcontainer pptpd[23611]: CTRL: Client 82.33.... control connection started pptpd[23611]: CTRL: Starting call (launching pppd, opening GRE) pptpd[23611]: pppd 2.4.5 started by root uid 0 pptpd[23611]: Using interface ppp0 pptpd[23611]: Connect ppp0 <-- /dev/pts/1 NetworkManager[1456]: SCPlugin - Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) NetworkManager[1456]:SCPlugin - Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. pptpd[23612]: peer from calling number 82... authorized. kernel: [2918261.416923] init: ufw pre-start process (23613) terminated with status 1 dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 7 CTRL: Ignored a SET LING info packet with real ACCMs! local IP address:109.0.121.197 remote IP address: 109.0.84.56 dhclient: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 13 NetworkManager[1456]: (eth1): DHCPv4 request timed out. NetworkManager[1456]: (eth1): canceled DHCP transaction, DHCP client pid 23280 NetworkManager[1456]: Activation (eth1) Stage 4 of 5 (IPv4 Configure Timeout) scheduled... NetworkManager[1456]: Activation (eth1) Stage 4 of 5 (IPv4 Configure Timeout) started... NetworkManager[1456]: (eth1): device state change: ip-config - failed (reason 'ip-config-unavailable') [70 120 5[ NetworkManager[1456]: Unmanaged 'ia_addr' insert (-1)[/code]

  Read the article

• Loud fans despite cool system under Linux (but not Windows)

  - by Sman789

  My new desktop computer runs almost silently under Windows, but the fans seem to run on a constantly high setting under Linux. Psensor shows that the GPU (with NVidia drivers) is thirty-something degrees and the CPU is about the same, so it's not just down to Linux somehow being more processor-intensive. I've read that the BIOS controls the fans under Linux, which makes sense given the high fan speeds when in BIOS as well. It's under Windows, when the ASUS AI Suite 3 software seems to take control, that the system runs more quietly and only speeds the fans up when required. So is there a Linux app which offers a similar dynamic control of the fans, or a setting hidden somewhere in the ASUS BIOS which allows the same but regardless of the OS? EDIT - I've tried using lm-sensors and fancontrol, but pwmconfig tells me "There are no pwm-capable sensor modules installed". This is after the sensors-detect command does find an 'Intel digital thermal sensor', and despite the sensors working fine in apps like psensor. Help getting this to work would likely solve the problem.

  Read the article

• Ubuntu 12.10 over Ubuntu 11.10 seems to hang

  - by Angela Trapp

  My installation of Ubuntu 12.10 over Ubuntu 11.10 seems to hang on "saving installed packages". How long should I wait before knowing for sure that something is wrong? I stopped it once and tried re-installing but am getting the same results. I'm installing from a USB stick. I'm connected to the internet using a wired connection but I'm reading here to connect to a wi-fi network while installing. Could this possibly be the issue? I can't install using wi-fi at the moment as my router was fried in a brownout yesterday. I've ordered another router online so as soon as it gets in, I'll try again. Any suggestions are appreciated! Please let me know if you need more information. It's a 32-bit installation and I have 1 GB of memory. Thanks!

  Read the article

• Failure to Boot Windows 7 after Ubuntu install

  - by Mike

  My computer is a (brand new) PC notebook, without a CD drive running Windows 7. I followed this page to install from USB: https://help.ubuntu.com/community/Installation/FromUSBStickQuick The installation went well and i am using Ubuntu now (v. 12.04 i believe) I want to be able to dual boot Ubuntu and Win7 The problem is that the disc partitioning during the Linux install caused a problem with Windows, caused some problem with windows, and windows can no longer boot when i choose it at the GNU GRUB screen. When i restart my computer i can successfully boot Linux, but not Windows 7. At the GRUB screen - if i run Win7 normally, it freezes, shows a blue screen, and returns back to GRUB - if i run Win7 recovery, i dont know how to access the files that i need in order to run windows again, so nothing helpful happens. Can you please tell me what i would need to do(or link a guide) in order to run Windows again. (Windows and Linux is preferable, but if thats impossible going back to only Windows will help too) Im guessing the easiest thing to do is just to reinstall both OS, or is there anyway to undo the partition i made during the install? Thanks

  Read the article

• Intel Atom D425 Problems

  - by Nico

  I have recently bought an Intel Atom D425 mini itx board with OCZ 30 Gig SSD and 1 Gig DDR3 ram. I have installed Ubuntu 10.04 and Crunchbang Statler ok; works fine in both. I tried to install Xubuntu 12.04, Ubuntu 12.04, and Mint 13 Mate. All of those 3 start up, but as soon as you get to install it all goes wrong and the monitor says input not supported. Is it an Intel Atom D425 problem, an Ubuntu problem, or something else? All help would be much appreciated Regards Nico

  Read the article

• Shortcut to change Launcher 'Hide' setting

  - by joris

  When I'm working on my laptop I have periods that I am only using a couple of programs, so the default intellihide setting of the Launcher ('Dodge windows') is very handy. But I also have periods that I have to switch very often between programs, and then I find it very useful (and better for my workflow) that the Launcher doesn't hide. Now, every time I wan't to switch I have to open CCSM and change the setting (Unity plugin - Hide Launcher), but it would be easier if I could use a shortcut for it. So my question: Is there a way to create a shortcut to switch between (or change) the two settings of Compiz? I thought of command line interface to compiz, but I couldn't directly find something like that.

  Read the article

• How to disable OSD notifications for specific email addresses?

  - by Zuul

  I receive several logs per day via email, either from testing operations, server status or backup resumes. Can I some how disable the notification balloon either by a specific email address, the email subject or any other possible filter, as to not be constantly notified about the success operations? I've looked within the Notify OSD Configuration, but couldn't find any option to this end. Since the email comes with different information when errors occur, I already have filters within Thunderbird as to move error logs to a folder that I keep tabs on... If relevant, I'm using Ubuntu 12.04 fully updated, and Thunderbird 15.0.1.

  Read the article

• Free space in tmpfs partition not adding up

  - by Dean Herbert

  I have had my /tmp/ partition filling up recently when it should not be anywhere near full. On further investigation, I found that the partition was listing free space a lot lower than it should be. I am guessing a remount will fix this, but am very curious as to why this has happened and where this space has gone. du output: root@odoroki:/tmp# du --summarize -h 3.3M . df output: root@odoroki:/tmp# df -h /tmp Filesystem Size Used Avail Use% Mounted on tmpfs 3.9G 3.3G 653M 84% /tmp Update: after deleting some files it has happened again. du output: root@odoroki:/tmp# du -h --summarize 11M . df output: root@odoroki:/tmp# df -h /tmp Filesystem Size Used Avail Use% Mounted on tmpfs 3.9G 3.9G 0 100% /tmp I have a feeling this has started since a recent apt-get upgrade, but it still seems like strange behaviour. I did do a quick scan over lsof output and couldn't see any open/stuck file handles. Unfortunately due to the seriousness of the issue I had to reboot the server, after which usage seems to match correctly.

  Read the article

• How can I autoclean my gnome main menu?

  - by Bruce Connor

  I like to experiment with lots of different software in my Ubuntu install. Then, every time Ubuntu reaches a new release cycle, I simply do a clean install (instead of upgrading) to get rid of all the extra software (and their respective config files/folders). The only thing I always backup and carry to the next install (besides personal files) are the config files for gnome, so my desktop is always the way I like it. =) The problem with that, is that the different packages I test out never get properly uninstalled, so my gnome main menu is full of broken links referring to software I had in previous installations (which got carried over because I kept the gnome config files). Is there any automated way to go through my gnome main menu and remove any broken links? I know how to manually edit the menu, and I could go through it myself, but I'm looking for some script or package that will clean for me so I wouldn't have to do it manually every release cycle.

  Read the article

• sbackup: can not mount FTP automatically

  - by ledy

  In the sbackup configuration GUI i set the ftp://user:pw@online/storage and it's marked as successfully connected. After daily backup time, I checked the ftp and it was empty. In the error mail it says: Error in _do_mount: volume doesn't implement mount [ERROR_NOT_SUPPORTED - Operation not supported for the current backend.] Unable to mount: volume doesn't implement mount File access manager not initialized When restarting the sbackup GUI, it is no longer connected to the ftp and i have to click the button again to connect the remote directory - although it still knows my user/pw. How to save this permanently?

  Read the article

• No boot or grub file after using ls command

  - by Poke Moke

  I had xubuntu installed, i believe version 12.04 and then tried to dual boot with backbox. It worked from the flash drive but upon installing it onto the hard drive, I could no longer boot backbox. I decided I would just clear my OS and put just backbox on the hard drive and only have a single boot. To do this, I erased my boot file completely which led to my current position. I am put into the grub rescue prompt. I can't do a system restore, I can't boot with anything I might try including puppy linux and a boot rescue, and I've looked up the commands and I've tried to fix this. I can do ls, I find the correct hd but then I'm stuck as I don't have a boot or grub folder. The command is typed as: ls (hd1,msdos1)/ and listed is ./ ../ lost+found/ etc/ media/ bin/ dev/ home/ lib/ mnt/ opt/ proc/ root/ run/ sbin/ selinux/ srv/ sys/ tmp/ usr/ var/ initrd.img vmlinuz cdrom/ apfolder initrd.img.old vmlinuz.old (not sure if it's initrd or init rd.img. as it wraps around the screen there.) I've seen commands regarding boot or grub if they are seen but as listed, they aren't there. Any ideas?

  Read the article

< Previous Page | 428 429 430 431 432 433 434 435 436 437 438 439  | Next Page >