Search Results

Search found 16393 results on 656 pages for 'long gu'.

Page 432/656 | < Previous Page | 428 429 430 431 432 433 434 435 436 437 438 439  | Next Page >

• Playing NSF music in FMOD.net

  - by Tesserex

  So, as the title says, I want to be able to play NSF files using FMOD, because my project already uses FMOD and I'd rather not replace it. This will involve figuring out how existing players and emulators work and porting it. I haven't yet found an existing player that uses FMOD. My starting point is the MyNes source from http://sourceforge.net/projects/mynes/. There are two big steps between here and what I'm looking for. MyNes plays from a ROM, not NSF. So, I have to rip out the APU and get it to play NSF files. The MyNes APU uses SlimDX, so I have to convert that to FMOD.NET. I am really stuck about how to go about either of these, because I'm not that familiar with audio formats and it's hard finding resources online. So here are a few questions: From what I can tell from the NSF spec at http://kevtris.org/nes/nsfspec.txt, it's just contains the relevant memory section of the ROM, plus the header. If anyone can verify or correct this that would be great. The emulator APU uses data from the rest of the emulator to play, including things like cycle counts. I'm not sure what replaces this in a standalone player. Can't I just load all the music data at once into a stream and play it? Joining #1 and #2, does the header data from the NSF substitute for some of the ROM data in the emulator code? Using FMOD, will I be following the usercreatedsound example for loading a stream? And does this format count as PCM? Specifically MyNes says PCM8. Any tips on loading / playing the stream in FMOD are appreciated. As an aside, I don't really understand the loading / playing sections of the spec I linked at all. It seems to apply to 6502 systems / emulators only and not to my situation. I know it's a long shot for anyone here to have enough experience in this area to help, but anything you can provide is definitely appreciated. A link to an existing .NET library that does this would be even better, but I don't believe one exists.

  Read the article

• NoSQL is not about object databases

  - by Bertrand Le Roy

  NoSQL as a movement is an interesting beast. I kinda like that it’s negatively defined (I happen to belong myself to at least one other such a-community). It’s not in its roots about proposing one specific new silver bullet to kill an old problem. it’s about challenging the consensus. Actually, blindly and systematically replacing relational databases with object databases would just replace one set of issues with another. No, the point is to recognize that relational databases are not a universal answer -although they have been used as one for so long- and recognize instead that there’s a whole spectrum of data storage solutions out there. Why is it so hard to recognize, by the way? You are already using some of those other data storage solutions every day. Let me cite a few: The file system Active Directory XML / JSON documents The Web e-mail Logs Excel files EXIF blobs in your photos Relational databases And yes, object databases It’s just a fact of modern life. Notice by the way that most of the data that you use every day is unstructured and thus mostly unsuitable for relational storage. It really is more a matter of recognizing it: you are already doing NoSQL. So what happens when for any reason you need to simultaneously query two or more of these heterogeneous data stores? Well, you build an index of sorts combining them, and that’s what you query instead. Of course, there’s not much distance to travel from that to realizing that querying is better done when completely separated from storage. So why am I writing about this today? Well, that’s something I’ve been giving lots of thought, on and off, over the last ten years. When I built my first CMS all that time ago, one of the main problems my customers were facing was to manage and make sense of the mountain of unstructured data that was constituting most of their business. The central entity of that system was the file system because we were dealing with lots of Word documents, PDFs, OCR’d articles, photos and static web pages. We could have stored all that in SQL Server. It would have worked. Ew. I’m so glad we didn’t. Today, I’m working on Orchard (another CMS ;). It’s a pretty young project but already one of the questions we get the most is how to integrate existing data. One of the ideas I’ll be trying hard to sell to the rest of the team in the next few months is to completely split the querying from the storage. Not only does this provide great opportunities for performance optimizations, it gives you homogeneous access to heterogeneous and existing data sources. For free.

  Read the article

• What have my fellow Delphi programmers done to make Eclipse/Java more like Delphi?

  - by Robert Oschler

  I am a veteran Delphi programmer working on my first real Android app. I am using Eclipse and Java as my development environment. The thing I miss the most of course is Delphi's VCL components and the associated IDE tools for design-time editing and code creation. Fortunately I am finding Eclipse to be one hell of an IDE with it's lush context sensitive help, deep auto-complete and code wizard facilities, and other niceties. This is a huge double treat since it is free. However, here is an example of something in the Eclipse/Java environment that will give a Delphi programmer pause. I will use the simple case of adding an "on-click" code stub for an OK button. DELPHI Drop button on a form Double-click button on form and fill in the code that will fire when the button is clicked ECLIPSE Drop button on layout in the graphical XML file editor Add the View.OnClickListener interface to the containing class's "implements" list if not there already. (Command+1 on Macs, Ctrl + 1 on PCs I believe). Use Eclipse to automatically add the code stub for unimplemented methods needed to support the View.OnClickListener interface, thus creating the event handler function stub. Find the stub and fill it in. However, if you have more than one possible click event source then you will need to inspect the View parameter to see which View element triggered the OnClick() event, thus requiring a case statement to handle multiple click event sources. NOTE: I am relatively new to Eclipse/Java so if there is a much easier way of doing this please let me know. Now that work flow isn't all that terrible, but again, that's just the simplest of use cases. Ratchet up the amount of extra work and thinking for a more complex component (aka widget) and the large number of properties/events it might have. It won't be long before you miss dearly the Delphi intelligent property editor and other designers. Eclipse tries to cover this ground by having an extensive list of properties in the menu that pops up when you right-click over a component/widget in the XML graphical layout editor. That's a huge and welcome assist but it's just not even close to the convenience of the Delphi IDE. Let me be very clear. I absolutely am not ranting nor do I want to start a Delphi vs. Java ideology discussion. Android/Eclipse/Java is what it is and there is a lot that impresses me. What I want to know is what other Delphi programmers that made the switch to the Eclipse/Java IDE have done to make things more Delphi like, and not just to make component/widget event code creation easier but any programming task. For example: Clever tips/tricks Eclipse plugins you found other ideas? Any great blog posts or web resources on the topic are appreciated too. -- roschler

  Read the article

• Plan Operator Tuesday round-up

  - by Rob Farley

  Eighteen posts for T-SQL Tuesday #43 this month, discussing Plan Operators. I put them together and made the following clickable plan. It’s 1000px wide, so I hope you have a monitor wide enough. Let me explain this plan for you (people’s names are the links to the articles on their blogs – the same links as in the plan above). It was clearly a SELECT statement. Wayne Sheffield (@dbawayne) wrote about that, so we start with a SELECT physical operator, leveraging the logical operator Wayne Sheffield. The SELECT operator calls the Paul White operator, discussed by Jason Brimhall (@sqlrnnr) in his post. The Paul White operator is quite remarkable, and can consume three streams of data. Let’s look at those streams. The first pulls data from a Table Scan – Boris Hristov (@borishristov)’s post – using parallel threads (Bradley Ball – @sqlballs) that pull the data eagerly through a Table Spool (Oliver Asmus – @oliverasmus). A scalar operation is also performed on it, thanks to Jeffrey Verheul (@devjef)’s Compute Scalar operator. The second stream of data applies Evil (I figured that must mean a procedural TVF, but could’ve been anything), courtesy of Jason Strate (@stratesql). It performs this Evil on the merging of parallel streams (Steve Jones – @way0utwest), which suck data out of a Switch (Paul White – @sql_kiwi). This Switch operator is consuming data from up to four lookups, thanks to Kalen Delaney (@sqlqueen), Rick Krueger (@dataogre), Mickey Stuewe (@sqlmickey) and Kathi Kellenberger (@auntkathi). Unfortunately Kathi’s name is a bit long and has been truncated, just like in real plans. The last stream performs a join of two others via a Nested Loop (Matan Yungman – @matanyungman). One pulls data from a Spool (my post – @rob_farley) populated from a Table Scan (Jon Morisi). The other applies a catchall operator (the catchall is because Tamera Clark (@tameraclark) didn’t specify any particular operator, and a catchall is what gets shown when SSMS doesn’t know what to show. Surprisingly, it’s showing the yellow one, which is about cursors. Hopefully that’s not what Tamera planned, but anyway...) to the output from an Index Seek operator (Sebastian Meine – @sqlity). Lastly, I think everyone put in 110% effort, so that’s what all the operators cost. That didn’t leave anything for me, unfortunately, but that’s okay. Also, because he decided to use the Paul White operator, Jason Brimhall gets 0%, and his 110% was given to Paul’s Switch operator post. I hope you’ve enjoyed this T-SQL Tuesday, and have learned something extra about Plan Operators. Keep your eye out for next month’s one by watching the Twitter Hashtag #tsql2sday, and why not contribute a post to the party? Big thanks to Adam Machanic as usual for starting all this. @rob_farley

  Read the article

• The Legend of the Filtered Index

  - by Johnm

  Once upon a time there was a big and bulky twenty-nine million row table. He tempestuously hoarded data like a maddened shopper amid a clearance sale. Despite his leviathan nature and eager appetite he loved to share his treasures. Multitudes from all around would embark upon an epiphanous journey to sample contents of his mythical purse of knowledge. After a long day of performing countless table scans the table was overcome with fatigue. After a short period of unavailability, he decided that he needed to consider a new way to share his prized possessions in a more efficient manner. Thus, a non-clustered index was born. She dutifully directed the pilgrims that sought the table's data - no longer would those despicable table scans darken the doorsteps of this quaint village. and yet, the table's veracious appetite did not wane. Any bit or byte that wondered near him was consumed with vigor. His columns and rows continued to expand beyond the expectations of even the most liberal estimation. As his rows grew grander they became more difficult to organize and maintain. The once bright and cheerful disposition of the non-clustered index began to dim. The wait time for those who sought the table's treasures began to increase. Some of those who came to nibble upon the banquet of knowledge even timed-out and never realized their aspired enlightenment. After a period of heart-wrenching introspection, the table decided to drop the index and attempt another solution. At the darkest hour of the table's desperation came a grand flash of light. As his eyes regained their vision there stood several creatures who looked very similar to his former, beloved, non-clustered index. They all spoke in unison as they introduced themselves: "Fear not, for we come to organize your data and direct those who seek to partake in it. We are the filtered index." Immediately, the filtered indexes began to scurry about. One took control of the past quarter's data. Another took control of the previous quarter's data. All of the remaining filtered indexes followed suit. As the nearly gluttonous habits of the table scaled forward more filtered indexes appeared. Regardless of the table's size, all of the eagerly awaiting data seekers were delivered data as quickly as a Jimmy John's sandwich. The table was moved to tears. All in the land of data rejoiced and all lived happily ever after, at least until the next data challenge crept from the fearsome cave of the unknown. The End.

  Read the article

• SQL SERVER – Identify Numbers of Non Clustered Index on Tables for Entire Database

  - by pinaldave

  Here is the script which will give you numbers of non clustered indexes on any table in entire database. SELECT COUNT(i.TYPE) NoOfIndex, [schema_name] = s.name, table_name = o.name FROM sys.indexes i INNER JOIN sys.objects o ON i.[object_id] = o.[object_id] INNER JOIN sys.schemas s ON o.[schema_id] = s.[schema_id] WHERE o.TYPE IN ('U') AND i.TYPE = 2 GROUP BY s.name, o.name ORDER BY schema_name, table_name Here is the small story behind why this script was needed. I recently went to meet my friend in his office and he introduced me to his colleague in office as someone who is an expert in SQL Server Indexing. I politely said I am yet learning about Indexing and have a long way to go. My friend’s colleague right away said – he had a suggestion for me with related to Index. According to him he was looking for a script which will count all the non clustered on all the tables in the database and he was not able to find that on SQLAuthority.com. I was a bit surprised as I really do not remember all the details about what I have written so far. I quickly pull up my phone and tried to look for the script on my custom search engine and he was correct. I never wrote a script which will count all the non clustered indexes on tables in the whole database. Excessive indexing is not recommended in general. If you have too many indexes it will definitely negatively affect your performance. The above query will quickly give you details of numbers of indexes on tables on your entire database. You can quickly glance and use the numbers as reference. Please note that the number of the index is not a indication of bad indexes. There is a lot of wisdom I can write here but that is not the scope of this blog post. There are many different rules with Indexes and many different scenarios. For example – a table which is heap (no clustered index) is often not recommended on OLTP workload (here is the blog post to identify them), drop unused indexes with careful observation (here is the script for it), identify missing indexes and after careful testing add them (here is the script for it). Even though I have given few links here it is just the tip of the iceberg. If you follow only above four advices your ship may still sink. Those who wants to learn the subject in depth can watch the videos here after logging in. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Index, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• SSDT - What's in a name?

  - by jamiet

  SQL Server Data Tools (SSDT) recently got released as part of SQL Server 2012 and depending on who you believe it can be described as either: a suite of tools for building SQL Server database solutions or a suite of tools for building SQL Server database, Integration Services, Analysis Services & Reporting Services solutions Certainly the SQL Server 2012 installer seems to think it is the latter because it describes SQL Server Data Tools as "the SQL server development environment, including the tool formerly named Business Intelligence Development Studio. Also installs the business intelligence tools and references to the web installers for database development tools" as you can see here: Strange then that, seemingly, there is no consensus within Microsoft about what SSDT actually is. On yesterday's blog post First Release of SSDT Power Tools reader Simon Lampen asked the quite legitimate question:I understand (rightly or wrongly) that SSDT is the replacement for BIDS for SQL 2012 and have just installed this. If this is the case can you please point me to how I can edit rdl and rdlc files from within Visual Studio 2010 and import MS Access reports.To which came the following reply:SSDT doesn't include any BIDs (sic) components. Following up with the appropriate team (Analysis Services, Reporting Services, Integration Services) via their forum or msdn page would be the best way to answer you questions about these kinds of services. That's from a Microsoft employee by the way. Simon is even more confused by this and replies with:I have done some more digging and am more confused than ever. This documentation (and many others) : msdn.microsoft.com/.../ms156280.aspx expressly states that SSDT is where report editing tools are to be foundAnd on it goes....You can see where Simon's confusion stems from. He has official documentation stating that SSDT includes all the stuff for building SSIS/SSAS/SSRS solutions (this is confirmed in the installer, remember) yet someone from Microsoft tells him "SSDT doesn't include any BIDs components".I have been close to this for a long time (all the way through the CTPs) so I can kind of understand where the confusion stems from. To my understanding SSDT was originally the name of the database dev stuff but eventually that got expanded to include all of the dev tools - I guess not everyone in Microsoft got the memo.Does this sound familiar? Have we not been down this road before? The database dev tools have had upteen names over the years (do any of datadude, TSData, VSTS for DB Pros, DBPro, VS2010 Database Projects sound familiar) and I was hoping that the SSDT moniker would put all confusion to bed - evidently its as complicated now as it has ever been.Forgive me for whinging but putting meaningful, descriptive, accurate, well-defined and easily-communicated names onto a product doesn't seem like a difficult thing to do. I guess I'm mistaken!Onwards and upwards...@Jamiet

  Read the article

• What micro web-framework has the lowest overhead but includes templating

  - by Simon Martin

  I want to rewrite a simple small (10 page) website and besides a contact form it could be written in pure html. It is currently built with classic asp and Dreamweaver templates. The reason I'm not simply writing 10 html pages is that I want to keep the layout all in 1 place so would need either includes or a masterpage. I don't want to use Dreamweaver templates, or batch processing (like org-mode) because I want to be able to edit using notepad (or Visual Studio) because occasionally I might need to edit a file on the server (Go Daddy's IIS admin interface will let me edit text). I don't want to use ASP.NET MVC or WebForms (which I use in my day job) because I don't need all the overhead they bring with them when essentially I'm serving up 9 static files, 1 contact form and 1 list of clubs (that I aim to use jQuery to filter). The shared hosting package I have on Go Daddy seems to take a long time to spin up when serving aspx files. Currently the clubs page is driven from an MS SQL database that I try to keep up to date by manually checking the dojo locator on the main HQ pages and editing the entries myself, this is again way over the top. I aim to get a text file with the club details (probably in JSON or xml format) and use that as the source for the clubs page. There will need to be a bit of programming for this as the HQ site is unable to provide an extract / feed so something will have to scrape the site periodically to update my clubs persistence file. I'd like that to be automated - but I'm happy to have that triggered on a visit to the clubs page so I don't need to worry about scheduling a job. I would probably have a separate process that updates the persistence that has nothing to do with the rest of the site. Ideally I'd like to use Mercurial (or git) to publish, I know Bitbucket (and github) both serve static page sites so they wouldn't work in this scenario (dynamic pages and a contact form) but that's the model I'd like to use if there is such a thing. My requirements are: Simple templating system, 1 place to define header, footers, menu etc., that can be edited using just notepad. Very minimal / lightweight framework. I don't need a monster for 10 pages Must run either on IIS7 (shared Go Daddy Windows hosting) or other free host

  Read the article

• Nokia vs. The World

  - by Michael B. McLaughlin

  I’m looking forward to the launch of the Nokia Lumia 920. Why? Well, it stacks up better than the competition for one thing. Then there’s also that security problem that certain other phones have. Mostly, though, it’s because I love my Lumia 900 and the 920, with Windows Phone 8, will be even better. Before I got my Lumia 900, I just took it as given that smart phone cameras couldn’t be good. The Lumia taught me that smart phone cameras can be good if the manufacturer treats them as an important component worth spending time and money on (rather than some thing that consumers expect such that they’d better throw one in). I’m extremely pleased with the quality of pictures that my Lumia 900 gives me as well as the range of settings it provides (you can delve in to tell it a film speed, an f-stop, and a whole range of other settings). And the image stabilization features in the Lumia 920 deliver far better results than the others. Nokia has had great maps for a long time and they continue to improve. Even better, they made a deal that puts many of their excellent maps into Windows Phone 8 itself. There are still Nokia-exclusive features such as Nokia City Lens, of course. But by giving the core OS a great set of fundamental map data and technologies, they help ensure that customers know that buying a Windows Phone 8 will give them a great map experience no matter who made the phone. I’ll be getting a 920, myself, but the HTC and Samsung devices that have been announced have some compelling features, too, and it’s great to know that people who buy one of these won’t need to worry about where their maps might lead them. I’m looking forward to the NFC capabilities and Qi wireless charging my Lumia 920 will have. With the availability of DirectX and C++ programming on Windows Phone 8, I’m also excited about all the great games that will be added to the Windows Phone environment. I love my Xbox Phone. I love my Office phone. I love my Facebook phone. I love my GPS phone. I love my camera phone. I love my SkyDrive phone. In short, I love my Windows Phone!

  Read the article

• Apple iPad 2 In April, iPhone 5 in June With New Hardware[Rumours]

  - by Gopinath

  Blogs and news sites are buzzing with the rumours of Apple’s next generation iPad and iPhone devices. These rumours interests the bloggers, geeks and end users of Apple devices as Apple maintains very tight lip on the new features of their upcoming products. The gadget blog Engadget has some very interesting rumours on the release of iPad 2 & iPhone 5 as well the new hardware they are going to have. Lets get into the details if you love to read the rumours of high profile blogs iPad 2 Release Date and Specs Apple seems to be all set to release iPad 2 in April, that is almost an year after the release of first iPad. It’s common for Apple to enjoy an one year long time to release a new version of their products. So if at all the rumours are to be believed, I can place an order of iPad 2 in April. Just like many of you out there, I’m also holding my iPad buying instinct and waiting for iPad 2 as it’s going to have at the minimum retina display,  Facetime features and few game changing features in Apple’s style. The report claims, iPad 2 will have a front and back cameras retina display SD Card slot (seems to be no USB) a dual GSM / CDMA chipset, that lets you use it with both GSM(AT &T, Airte) and CDMA(Verizon, Reliance) telecom providers iPhone 5 Release Date and Specs When it comes to iPhone 5 information, the rumour claims that the new iPhone is a completed redesigned device and it’s slated to release in summer of United States(i.e. June 2011). The device is also being tested by senior Apple executives right inside the campus and strictly not allowed to carry it outside. This restriction is to make sure that iPhone 5 will not land land up in a bar and then in the hands of geek blogs like how it happened with iPhone 4 last year. When it comes to the hardware of iPhone 5 Apple’s new A5 CPU (a Cortex A9-based, multi-core chip) a dual GSM / CDMA chipset, that lets you use it with both GSM(AT &T, Airte) and CDMA(Verizon, Reliance) telecom providers via Engadget and cc image credit flickr/mr-blixt This article titled,Apple iPad 2 In April, iPhone 5 in June With New Hardware[Rumours], was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• ASP.NET Localization: Enabling resource expressions with an external resource assembly

  - by Brian Schroer

  I have several related projects that need the same localized text, so my global resources files are in a shared assembly that’s referenced by each of those projects. It took an embarrassingly long time to figure out how to have my .resx files generate “public” properties instead of “internal” so I could have a shared resources assembly (apparently it was pretty tricky pre-VS2008, and my “googling” bogged me down some out-of-date instructions). It’s easy though – Just change the “Custom Tool” to “PublicResXFileCodeGenerator”:    …which can be done via the “Access Modifier” dropdown of the resource file designer window:   A reference to my shared resources DLL gives me the ability to use the resources in code, but by default, the ASP.NET resource expression syntax: <asp:Button ID="BeerButton" runat="server" Text="<%$ Resources:MyResources, Beer %>" />   …assumes that your resources are in your web site project.   To make resource expressions work with my shared resources assembly, I added two classes to the resources assembly: 1) a custom IResourceProvider implementation:   1: using System; 2: using System.Web.Compilation; 3: using System.Globalization; 4:   5: namespace DuffBeer 6: { 7: public class CustomResourceProvider : IResourceProvider 8: { 9: public object GetObject(string resourceKey, CultureInfo culture) 10: { 11: return MyResources.ResourceManager.GetObject(resourceKey, culture); 12: } 13:   14: public System.Resources.IResourceReader ResourceReader 15: { 16: get { throw new NotSupportedException(); } 17: } 18: } 19: }   2) and a custom factory class inheriting from the ResourceProviderFactory base class:   1: using System; 2: using System.Web.Compilation; 3:   4: namespace DuffBeer 5: { 6: public class CustomResourceProviderFactory : ResourceProviderFactory 7: { 8: public override IResourceProvider CreateGlobalResourceProvider(string classKey) 9: { 10: return new CustomResourceProvider(); 11: } 12:   13: public override IResourceProvider CreateLocalResourceProvider(string virtualPath) 14: { 15: throw new NotSupportedException(String.Format( 16: "{0} does not support local resources.", 17: this.GetType().Name)); 18: } 19: } 20: }   In the “system.web / globalization” section of my web.config file, I point the “resourceProviderFactoryType" property to my custom factory:   <system.web> <globalization culture="auto:en-US" uiCulture="auto:en-US" resourceProviderFactoryType="DuffBeer.CustomResourceProviderFactory, DuffBeer" />   This simple approach met my needs for these projects , but if you want to create reusable resource provider and factory classes that allow you to specify the assembly in the resource expression, the instructions are here.

  Read the article

• SQL SERVER – DVM sys.dm_os_sys_info Column Name Changed in SQL Server 2012

  - by pinaldave

  Have you ever faced situation where something does not work and when you try to go and fix it – you like fixing it and started to appreciate the breaking changes. Well, this is exactly I felt yesterday. Before I begin my story of yesterday I want to state it candidly that I do not encourage anybody to use * in the SELECT statement. One of the my DBA friend who always used my performance tuning script yesterday sent me email asking following question - “Every time I want to retrieve OS related information in SQL Server – I used DMV sys.dm_os_sys_info. I just upgraded my SQL Server edition from 2008 R2 to SQL Server 2012 RC0 and it suddenly stopped working. Well, this is not the production server so the issue is not big yet but eventually I need to resolve this error. Any suggestion?” The funny thing was original email was very long but it did not talk about what is the exact error beside the query is not working. I think this is the disadvantage of being too friendly on email sometime. Well, never the less, I quickly looked at the DMV on my SQL Server 2008 R2 and SQL Server 2012 RC0 version. To my surprise I found out that there were few columns which are renamed in SQL Server 2012 RC0. Usually when people see breaking changes they do not like it but when I see these changes I was happy as new names were meaningful and additionally their new conversion is much more practical and useful. Here are the columns previous names - Previous Column Name New Column Name physical_memory_in_bytes physical_memory_kb bpool_commit_target committed_target_kb bpool_visible visible_target_kb virtual_memory_in_bytes virtual_memory_kb bpool_commited committed_kb If you read it carefully you will notice that new columns now display few results in the KB whereas earlier result was in bytes. When I see the results in bytes I always get confused as I could not guess what exactly it will convert to. I like to see results in kb and I am glad that new columns are now displaying the results in the kb. I sent the details of the new columns to my friend and ask him to check the columns used in application. From my comment he quickly realized why he was facing error and fixed it immediately. Overall – all was well at the end and I learned something new. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL DMV, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Isometric screen to 3D world coordinates efficiently

  - by Justin

  Been having a difficult time transforming 2D screen coordinates to 3D isometric space. This is the situation where I am working in 3D but I have an orthographic camera. Then my camera is positioned at (100, 200, 100), Where the xz plane is flat and y is up and down. I've been able to get a sort of working solution, but I feel like there must be a better way. Here's what I'm doing: With my camera at (0, 1, 0) I can translate my screen coordinates directly to 3D coordinates by doing: mouse2D.z = (( event.clientX / window.innerWidth ) * 2 - 1) * -(window.innerWidth /2); mouse2D.x = (( event.clientY / window.innerHeight) * 2 + 1) * -(window.innerHeight); mouse2D.y = 0; Everything okay so far. Now when I change my camera back to (100, 200, 100) my 3D space has been rotated 45 degrees around the y axis and then rotated about 54 degrees around a vector Q that runs along the xz plane at a 45 degree angle between the positive z axis and the negative x axis. So what I do to find the point is first rotate my point by 45 degrees using a matrix around the y axis. Now I'm close. So then I rotate my point around the vector Q. But my point is closer to the origin than it should be, since the Y value is not 0 anymore. What I want is that after the rotation my Y value is 0. So now I exchange my X and Z coordinates of my rotated vector with the X and Z coordinates of my non-rotated vector. So basically I have my old vector but it's y value is at an appropriate rotated amount. Now I use another matrix to rotate my point around the vector Q in the opposite direction, and I end up with the point where I clicked. Is there a better way? I feel like I must be missing something. Also my method isn't completely accurate. I feel like it's within 5-10 coordinates of where I click, maybe because of rounding from many calculations. Sorry for such a long question.

  Read the article

• Some of my favourite Visual Studio 2012 things&ndash;Teams

  - by Aaron Kowall

  Getting the balance right for when and how many team projects to create has always been a bit of a balance.  On large initiatives, there are often teams who work toward a common system.  These teams often have quite a bit of autonomy, but need to roll up to some higher level initiative.  In TFS 2010, people were often tempted to create separate Team Projects for each of the sub-teams and then do some magic with reporting and cross-team queries to get the consolidated view.  My recommendation was always to use Areas as a means of separating work across the team, but that always resulted in a large number of queries that need to be maintained and just seemed confusing.  When doing anything you had to remember to filter the query or view by Area in order to get correct results. Along with the awesome web access portal that comes in TFS 2012 (which I will cover details of in another post) the product group has introduced the concept of Teams.  A team is a sub-group within a TFS 2012 Team Project which allows us to more easily divide work along team boundaries. Technically, a Team is defined by an Area Path and a TFS Group, both of which could be done in TFS 2012.  However, by allowing for creation of a ‘Team’ in TFS 2012, the web portal is able to do a bunch of ‘magic’ for us.  We can view the project site (backlog, taskboard, etc) for the the team, we can assign items to the team and we can view the burndown for the team.  Basically, all the stuff that we had to prepare manually we now get created and managed for us with a nice UI. When you create a Team Project in TFS 2012, a ‘Default’ team is created with the same name as the Team Project.  So, if you only have 1 team working on the project, you are set.  If you want to divide the work into additional teams, you can create teams by using the Team Web Client. Teams are created using the ‘Administer Server’ icon in the top right of the web site.   You can select the team site by using the team chooser: Once you have selected a team, the Product Backlog, TaskBoard, Burndown Charts, etc. are all filtered to that team. NOTE: You always have the ability to choose the ‘Default’ team to see items for the entire project. PS: It’s been a long while since I shared on this blog.  To help with that I’m in a blogging challenge with some other developer and agilist friends.  Please check out their blogs as well: Steve Rogalsky: http://winnipegagilist.blogspot.ca Dylan Smith: http://www.geekswithblogs.net/optikal Tyler Doerkson: http://blog.tylerdoerksen.com David Alpert: http://www.spinthemoose.com Dave White: http://www.agileramblings.com   Technorati Tags: TFS 2012,Agile,Team

  Read the article

• ASP.Net or WPF(C#)?

  - by Rachel

  Our team is divided on this and I wanted to get some third-party opinions. We are building an application and cannot decide if we want to use .Net WPF Desktop Application with a WCF server, or ASP.Net web app using jQuery. I thought I'd ask the question here, with some specs, and see what the pros/cons of using either side would be. I have my own favorite and feel I am biased. Ideally we want to build the initial release of the software as fast as we can, then slow down and take time to build in the additional features/components we want later on. Above all we want the software to be fast. Users go through records all day long and delays in loading records or refreshing screens kills their productivity. Application Details: I'm estimating around 100 different screens for initial version, with plans for a lot of additional screens being added on later after the initial release. We are looking to use two-way communication for reminder and event systems Currently has to support around 100 users, although we've been told to allow for growth up to 500 users We have multiple locations Items to consider (maybe not initially in some cases but in future releases): Room for additional components to be added after initial release (there are a lot of of these... perhaps work here than the initial application) Keyboard navigation Performance is a must Production Speed to initial version Low maintenance overhead Future support Softphone/Scanner integration Our Developers: We have 1 programmer who has been learning WPF the past few months and was the one who suggested we use WPF for this. We have a 2nd programmer who is familiar with ASP.Net and who may help with the project in the future, although he will not be working on it much up until the initial release since his time is spent maintaining our current software. There is me, who has worked with both and am comfortable in either We have an outside company doing the project management, and they are an ASP.Net company. We plan on hiring 1-2 others, however we need to know what direction we are going in first Environment: General users are on Windows 2003 server with Terminal Services. They connect using WYSE thin-clients over an RDP connection. Admin staff has their own PCs with XP or higher. Users are allowed to specify their own resolution although they are limited to using IE as the web browser. Other locations connects to our network over a MPLS connection Based on that, what would you choose and why? I am asking here instead of SO because I am looking for opinions and not answers

  Read the article

• Interpolation using a sprite's previous frame and current frame

  - by user22241

  Overview I'm currently using a method which has been pointed out to me is extrapolation rather than interolation. As a result, I'm also now looking into the possibility of using another method which is based on a sprite's position at it's last (rendered) frame and it's current one. Assuming an interpolation value of 0.5 this is, (visually), how I understand it should affect my sprite's position.... This is how I'm obtaining an inerpolation value: public void onDrawFrame(GL10 gl) { // Set/re-set loop back to 0 to start counting again loops=0; while(System.currentTimeMillis() > nextGameTick && loops < maxFrameskip) { SceneManager.getInstance().getCurrentScene().updateLogic(); nextGameTick += skipTicks; timeCorrection += (1000d / ticksPerSecond) % 1; nextGameTick += timeCorrection; timeCorrection %= 1; loops++; tics++; } interpolation = (float)(System.currentTimeMillis() + skipTicks - nextGameTick) / (float)skipTicks; render(interpolation); } I am then applying it like so (in my rendering call): render(float interpolation) { spriteScreenX = (spriteScreenX - spritePreviousX) * interpolation + spritePreviousX; spritePreviousX = spriteScreenX; // update and store this for next time } Results This unfortunately does nothing to smooth the movement of my sprite. It's pretty much the same as without the interpolation code. I can't get my head around how this is supposed to work and I honestly can't find any decent resources which explain this in any detail. My understanding of extrapolation is that when we arrive at the rendering call, we calculate the time between the last update call and the render call, and then adjust the sprite's position to reflect this time (moving the sprite forward) - And yet, this (Interpolation) is moving the sprite back, so how can this produce smooth results? Any advise on this would be very much appreciated. Edit I've implemented the code from OriginalDaemon's answer like so: @Override public void onDrawFrame(GL10 gl) { newTime = System.currentTimeMillis()*0.001; frameTime = newTime - currentTime; if ( frameTime > (dt*25)) frameTime = (dt*25); currentTime = newTime; accumulator += frameTime; while ( accumulator >= dt ) { SceneManager.getInstance().getCurrentScene().updateLogic(); previousState = currentState; t += dt; accumulator -= dt; } interpolation = (float) (accumulator / dt); render(); } Interpolation values are now being produced between 0 and 1 as expected (similar to how they were in my original loop) - however, the results are the same as my original loop (my original loop allowed frames to skip if they took too long to draw which I think this loop is also doing). I appear to have made a mistake in my previous logging, it is logging as I would expect it to (interpolated position does appear to be inbetween the previous and current positions) - however, the sprites are most definitely choppy when the render() skipping happens.

  Read the article

• Friday Fun: Snow Crusher

  - by Asian Angel

  It has probably been a long week whether you have already returned to work or are finishing up the last of your vacation time. If you are in need of some stress relief, then we have we the perfect game for you. This week you get to be totally fiendish and use a monster size snowball to destroy as many cars as possible at the local snow lodge. Snow Crusher The object of the game is simple…create as large of a monster snowball as you can and then send it down over the side of the mountain to destroy the cars at the snow lodge. You can choose from three different sizes of monster snowballs to create. We chose the “Snowflake Size” for our reign of destruction. Once you have chosen a monster snowball size, all that is left to do is select the control method that works best for you. As soon as you select the control method, your monster snowball creation will automatically begin. Keep in mind that the faster your snowball goes the harder it can become to steer if you make sudden movements… At the top you can watch your progress towards the drop-off point and the green boxes highlighted at the bottom indicate how large of an item (such as trees or boulders) your snowball can roll over and add to the total mass. Snowball speed is shown in the lower right corner. Time to roll! As soon as the first green box is lit up you can start adding small trees to your snowball’s mass. You will want to avoid larger items as you go because they will penalize your score, slow you down, and reduce the size of your snowball! Halfway to the drop-off point and our snowball is now able to grab up larger trees. If you have not hit any large items along the way, your snowball will definitely be moving along at a good rate by now. When you reach the end of the mass building area, your snowball will pop out into the open and get ready to drop off over the side of the mountain. Go snowball go! Yes! Thirteen cars crushed and ready for the scrap yard… If the “Snowflake Size” snowball can do this, just think what the “Avalanche Size” can do with three minutes of time to build up mass! Have fun with those monster snowballs! Play Snow Crusher Latest Features How-To Geek ETC The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Classic Super Mario Brothers Theme for Chrome and Iron Experimental Firefox Builds Put Tabs on the Title Bar (Available for Download) Android Trojan Found in the Wild Chaos, Panic, and Disorder Wallpaper Enjoy Christmas Beyond the Holiday with Christmas Eve Crisis Parrotfish Extends the Number of Services Accessible in Twitter Previews

  Read the article

• Oracle SOA Security for OUAF Web Services

  - by Anthony Shorten

  With the ability to use Oracle SOA Suite 11g with the Oracle Utilities Application Framework based products, an additional consideration needs to be configured to ensure correct integration. That additional consideration is security. By default, SOA Suite propagates any credentials from the calling application through to the interfacing applications. In most cases, this behavior is not appropriate as the calling application may use different credential stores and also some interfaces are “disconnected” from a calling application (for example, a file based load using the File Adapter). These situations require that the Web Service calls to the Oracle Utilities Application Framework based products have their own valid credentials. To do this the credentials must be attached at design time or at run time to provide the necessary credentials for the call. There are a number of techniques that can be used to do this: At design time, when integrating a Web Service from an Oracle Utilities Application Framework based product you can attach the security policy “oracle/wss_username_token_client_policy” in the composite.xml view. In this view select the Web Service you want to attach the policy to and right click to display the context menu and select “Configure WS Policies” and select the above policy from the list. If you are using SSL then you can use “oracle/wss_username_token_over_ssl_client_policy” instead. At design time, you can also specify the credential key (csf-key) associated with the above policy by selecting the policy and clicking “Edit Config Override Properties”. You name the key appropriately. Everytime the SOA components are deployed the credential configuration is also sent. You can also do this after deployment, or what I call at “runtime”, by specifying the policy and credential key in the Fusion Middleware Control. Refer to the Fusion Middleware Control documentation on how to do this. To complete the configuration you need to add a map and the key specified earlier to the credential store in the Oracle WebLogic instance used for Oracle SOA Suite. From Fusion Middleware Control, you do this by selecting the domain the SOA Suite is installed in a select “Credentials” from the context menu. You now need to add the credentials by adding the map “oracle.wsm.security” (the name is IMPORTANT) and creating a key with the necessary valid credentials. The example below added a key called “mdm.key”. The name I used is for example only. You can name the key anything you like as long as it corresponds to the key you specified in the design time component. Note: I used SYSUSER as an example credentials in the example, in real life you would use another credential as SYSUSER is not appropriate for production use. This key can be reused for other Oracle Utilities Application Framework Web Service integrations or you can use other keys for individual Web Service calls. Once the key is created and the SOA Suite components deployed the transactions should be able to be called as necessary. If you need to change the password for the credentials it can be done using the Fusion Middleware Control functionality.

  Read the article

• Ranking Part III

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved   Ranking Part III In a previous blogs “Ranking an Introduction” and  “Ranking Part II” , you have already praised me in “Rank the Author” and learned how to create a new element on a page and how to place it where you need it. For this installment, I just added code to keep the number of votes (you vote by clicking one of the stars) and the total vote. Using these two, we can compute the average rating. It’s a small step, but its purpose is to show that we do not need a detailed history in order to compute the average. A running total is sufficient. Please note that once you close the game, you will lose your previous total. In real life, we persist the totals in the list itself. We also keep a list of actual votes, but its purpose is to prevent double votes. If a person has already voted, his user id is already on the list and our program will check for it and bar the person from voting again. This is coded in an event receiver, which is a SharePoint server piece of code. I will show you how to do this part in a subsequent blog. Again, go to the page and look at the code. The gist of it is here. avg, votes, and stars are global variables that I defined before. function sendRate(sel){//I hate long line so I created pieces of the message in their own vars            var s1 = "Your Rating Was: ";            var s2 = ".. ";            var s3 = "\nVotes = ";            var s4 = "\nTotal Stars = ";            var s5 = "\nAverage = ";            var s;            s = parseInt(sel.id.replace("_", '')); // Get the selected star number            votes = parseInt(votes) + 1;            stars = parseInt(stars) + s;            avg = parseFloat(stars) / parseFloat(votes);            alert(s1 + sel.id + s2 +sel.title + s3 + votes + s4 + stars + s5 + avg);} Click on the link to play and examine “Ranking with Stats” That’s all folks!

  Read the article

• 10.10 freezing when sftp downloading

  - by aGr

  My ubuntu 10.10 is freezing during downloading from my other computer on sftp. I thought it might be some nautilus issues so I tried it via command line and I got the same thing - after few minutes the whole computer freezes. Mostly the numlock led is blinking (I've heard somewhere that this means a kernel panic), but not in 100% cases. I dunno if that helps but here is a log from /var/log/message in the time that this happened. At least I hope so - it wasn't that big, when it happened before. But this looks quite "errorish", right? (isn't complete - see bottom) Jan 5 17:57:49 tomas-ntb kernel: imklog 4.2.0, log source = /proc/kmsg started. Jan 5 17:57:49 tomas-ntb rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="953" x-info="http://www.rsyslog.com"] (re)start Jan 5 17:57:49 tomas-ntb rsyslogd: rsyslogd's groupid changed to 103 Jan 5 17:57:49 tomas-ntb rsyslogd: rsyslogd's userid changed to 101 Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] Initializing cgroup subsys cpuset Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] Initializing cgroup subsys cpu Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] Linux version 2.6.35-24-generic (buildd@vernadsky) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 (Ubuntu 2.6.35-24.42-generic 2.6.35.8) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-provided physical RAM map: Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dffa8000 (usable) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000dffa8000 - 00000000dffb0000 (ACPI NVS) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000dffb0000 - 00000000dffbff00 (ACPI data) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000dffbff00 - 00000000dfff0000 (ACPI NVS) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000dfff0000 - 00000000e0000000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] BIOS-e820: 0000000120000000 - 0000000140000000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] DMI 2.5 present. Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] last_pfn = 0xdffa8 max_arch_pfn = 0x100000 Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] Scanning 0 areas for low memory corruption Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified physical RAM map: Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified: 0000000000010000 - 000000000009e800 (usable) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified: 000000000009e800 - 00000000000a0000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Jan 5 17:57:49 tomas-ntb kernel: [ 0.000000] modified: 0000000000100000 - 00000000dffa8000 (usable) ... to long - for whole and better view click here

  Read the article

• Oracle and Eloqua Welcome Compendium’s Content Marketing

  - by Mike Stiles

  Yesterday, Oracle announced its acquisition of Compendium, a cloud-based content marketing provider that helps companies plan, produce and deliver engaging content across multiple channels throughout their customers' lifecycle. Why? Because every part of the above paragraph speaks to where modern marketing is and where it’s headed. Customers have now been empowered, thanks to the Internet and particularly social, with access to almost limitless amounts of information about companies and products. This includes the especially influential voices of friends and objective acquaintances that have experience with the product or brand. With mobile, this info is available instantly in the palm of their hand. All of this research and influence mind you, is taking place long before a prospect will ever engage with the brand itself or one of its sales reps. So how does a brand effectively insert itself into these conversations and this flow of the customer journey? Now, more than ever, marketers must deliver relevant and engaging content across multiple channels and throughout the entire customer journey to be useful, helpful, and influential. Compendium has a data-driven content marketing platform that lines up relevant content with customer data and personas so brands can accelerate the conversion of prospects. Now think about combining that with the Oracle Eloqua Marketing Cloud, part of Oracle's comprehensive CX solution. Marketers will be able to automate content delivery across channels by aligning persona-based content with customers' digital body language. Better customer engagement, improved sales lead quality, better return on marketing investment, and higher customer loyalty. Now we’re talking. Does data-driven content marketing have an impact? Compendium customer CVENT is a SaaS company specializing in meetings management tech. They wanted to increase leads & ad performance on their blog and dramatically increase their content. They also wanted to manage the creation, workflow, promotion and distribution of that content. With Compendium, CVENT created over 9,000 content elements, and sales-ready leads grew 325%. So Oracle Eloqua helps you target audiences, know buyers, and automate multi-channel marketing campaigns. Compendium lets you plan, publish, manage and measure content across content types and channels. Now kick it up yet another notch with Oracle’s Analytics, Big Data and Social solutions, and you’re using your marketing dollars to reach the right people in the right place at the right time with the right content. And as if that weren’t enough, your customers will love you for it. @mikestiles

  Read the article

• Step Away From That Computer! You’re Not Qualified to Use It!

  - by Michael Sorens

  Most things tend to come with warnings and careful instructions these days, but sadly not one of the most ubiquitous appliances of all, your computer. If a chainsaw is missing its instructions, you’re well advised not to use it, even though you probably know roughly how it’s supposed to work. I confess, there are days when I feel the same way about computers. Long ago, during the renaissance of the computer age, it was possible to know everything about computers. But today, it is challenging to be fully knowledgeable even in one small area, and most people aren’t as savvy as they like to think. And, if I may borrow from Edwin Abbott Abbott’s classic Flatland, that includes me. And you. Need an example of what I mean? Take a look at almost any recent month’s batch of Windows updates. Just two quick questions for you: Do you need all of those updates? Is it safe to install all of those updates? I do software design and development for a living on Windows and the .NET platform, but I will be quite candid: I often have little clue what the heck some of those updates are going to do or why they are needed. So, if you do not know why they are needed or what they do, how do you know if they are safe? Of course, one can sidestep both questions by accepting Microsoft’s recommended Windows Update setting of “install updates automatically”. That leads you to infer that you need all of them (which is not always the case) and, more significantly, that they are safe. Quite safe. Ah, lest reality intrude upon such a pretty picture! Sadly, there is no such thing as risk-free software installation, and payloads from Windows Update are no exception. Earlier this year, a Windows Secrets Patch Watch article touted this headline: Keep this troublesome kernel update on hold. It discusses KB 2862330, a security update originally published more than 4 months earlier, and yet the article still recommends not installing it! Most people simply do not have the time, resources, or interest, to go about figuring out which updates to install or postpone or skip for safety reasons. Windows Secrets Patch Watch is the best service I have encountered for getting advice, but it is still no panacea and using the service effectively requires a degree of computer literacy that I still think is beyond a good number of people. Which brings us full circle: Step Away From That Computer! You’re Not Qualified to Use It!

  Read the article

• Oracle Announces Availability of Oracle Exaskeleton with Extreme Scale

  - by J Swaroop

  Re-posting Bruce Tierney's original post - albeit a day late: I reckon this is Oracle's most interesting launch this year. Enjoy! The World’s First Human Scale Body Surface (HSBS) Designed to Toughen Spineless Wimps April 1, 2012 Building on the success of Oracle Exalogic, Oracle Exadata, and Oracle Exalytics, Oracle today announced the general availability of Oracle Exaskeleton, toughening up spineless wimps across the globe through the introduction of extreme scalability over the human body leveraging a revolutionary new technology called Human Scale Body Surface (HSBS). First Customer Ship (FCS) was received by the little known and mostly unsuccessful superhero Awkwardman. After applying Oracle Exaskeleton with extreme scale, he has since rebranded himself as Aquaman. Said Aquaman, “I used to feel so helpless in my skin…now I feel like…well…a highly scaled Engineered System thanks to Oracle!” Thousand of meek and mild individuals eagerly lined up outside Oracle Corporation’s Redwood Shores office to purchase the new Oracle Exaskeleton, with the hope of finally gaining the spine they never had. Unfortunately for the individuals, a bully was spotted allegedly kicking the sand covering the beaches of Redwood Shores into the still spineless Exaskeleton hopefuls. Supporting Quotes “Industry analysts are inquiring if Oracle Exaskeleton is a radical departure from Oracle’s traditional enterprise focus into new markets”, said Oracle representative Sabrina Twich, “Oracle has extensive expertise in unified backbone solutions for application infrastructures…this is simply a new port to the human body combining our Business Intelligence (BI) and RDBC (Remote Direct Brain Cell) technologies.” “With this release of Oracle Exaskeleton, Oracle has redefined scalability. Software and hardware vendors had it all wrong” said the Director of Oracle Exaskeleton, “Scalability for hardware is like…um…you know…so scale-ful. No, wait…can I say that again? I didn’t get that right…Scalability is hardware-on-demand with public and private…hybrid clouds, no…<long pause>…Scalability for… nevermind, I don’t want to be in this stupid press release anyway” Releases An upcoming Oracle Exaskeleton service pack release will include a new datasheet with an extensive library of three-letter acronyms (TLAs) as well as the introduction of more four-letter acronyms (FLAs) since technologies vendors have used up almost all of the 17,576 TLA permutations (TLAPs). About Oracle Oracle engineers hardware and software to work together in the cloud and in your data center. It would be an amazing coincidence if any of this is true in some secret Oracle lab, but I doubt it. Trademarks Really…you’re still reading this? Cool! Aquaman - First Customer Ship (FCS) - Oracle Exaskeleton

  Read the article

• Angry Bird Makers: Developers Love iOS Over Android To Make Money

  - by Gopinath

  These days web is buzzing with Apple iOS vs Google Android debates. Recently Fortune predicted that Android is going to explode in 2011 and it will surpass Apple’s iOS market share. Yes Android is set to spread its wings across all the devices – smartphones, TVs, set top boxes, in car entertainment devices, what not. Think of any device that requires operating system, Android can be used. On the other than iOS is only available on very selective Apple devices – iPods, iPhones and iPads. When it comes to the count of devices running on a specific OS, Android will be far ahead of iOS but when you consider a quality of devices and providing an eco system for business to make money iOS seems to be the winner. That is what experts and analysts are saysing. Here is an excerpt from Peter Vesterbacka, maker of the popular Angry Birds game, interview to Tech N Marketing site.  He says Apple will be the number one platform for a long time from a developer perspective, they have gotten so many things right. And they know what they are doing and they call the shots. Android is growing, but it’s also growing complexity at the same time. Device fragmentation not the issue, but rather the fragmentation of the ecosystem. So many different shops, so many different models. The carriers messing with the experience again. Open but not really open, a very Google centric ecosystem. And paid content just doesn’t work on Android. Peter says developer prefer iOS over Android as it’s not very easy to make money on Android market. That’s why they released a free version of Angry Birds game with ads support for Android devices. Free is the way to go with Android. Nobody has been successful selling content on Android. We will offer a way to remove the ads by paying for the app, but we don’t expect that to be a huge revenue stream. You can read full interview here. cc image credit: flickr/johanl This article titled,Angry Bird Makers: Developers Love iOS Over Android To Make Money, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• PeopleSoft HCM @ OHUG 11: Enter the Matrix

  - by Jay Zuckert

  The PeopleSoft HCM team is back from a very busy and exciting OHUG conference in Orlando. The packed, standing-room only PeopleSoft HCM Roadmap keynote was the highlight of the conference for many attendees and the reviews are in : PeopleSoft rocked the house ! Great demonstration of products in the keynote. Best keynote in a long time, and fun. Engaging and entertaining, great demonstration of capabilities. Message received loud and clear, PeopleSoft applications are here to stay.  PeopleSoft has a real vision moving forward. Real-time polls using mobile texting were cutting edge.                          Tracy Martin (as Trinity) and other members of the PeopleSoft HCM team presented a ‘must-see’ Matrix-themed session while dressed as movie characters. The keynote highlighted planned HCM capabilities for Matrix administration and future organization visualization enhancements. The team also previewed the planned Manager Dashboard and Talent Summary.                           Following the keynote, some of the cast posed for photo opportunities at the OHUG booth in the exhibition hall. As you can imagine, they received some interesting looks walking by the other vendor booths. The PeopleSoft HCM team also presented numerous other OHUG sessions covering PeopleSoft Talent Management, Compensation, HR HelpDesk, Payroll, Global HCM Practices, Time & Labor, Absence Management, and Benefits. All of those presentations are available from the OHUG site at www.ohug.org. When not in one of the well-attended PeopleSoft HCM sessions, conference attendees filled the Oracle booth in the exhibition hall to see live product demonstrations. True to their PeopleSoft roots, some of the PeopleSoft HCM team played as hard as they worked in Orlando and enjoyed the OHUG Appreciation event along with customers at the Hard Rock. We are already busy planning for Oracle OpenWorld 2011 and prepping sessions our PeopleSoft HCM customers are sure to like. We hope to see you there in San Francisco from Oct. 2-6. To learn more about OpenWorld or to register, click here.

  Read the article

< Previous Page | 428 429 430 431 432 433 434 435 436 437 438 439  | Next Page >