Search Results

Search found 41497 results on 1660 pages for 'fault'.

Page 433/1660 | < Previous Page | 429 430 431 432 433 434 435 436 437 438 439 440  | Next Page >

• How to detect hard disk failure?

  - by Devator

  So, one of my servers has a hard disk failure. It's running software RAID, the system locked up and according to /proc/mdstat (and /var/log/messages), it's really down: Personalities : [raid1] md2 : active raid1 sdb2[1] 104320 blocks [2/1] [_U] md5 : active raid1 sdb5[1] 2104448 blocks [2/1] [_U] md6 : active raid1 sdb6[1] 830134656 blocks [2/1] [_U] md1 : active raid1 sdb1[1] 143363968 blocks [2/1] [_U] and Nov 5 22:04:37 m38501 smartd[4467]: Device: /dev/sda, not capable of SMART self-check However when I do smartctl -H /dev/sda, it passes the test. It also passes the test with smartctl --test=short /dev/sda. So, is smartctl a broken testing tool, or am I doing something completely off?

  Read the article

• Can DPM 2007 back up Active Directory?

  - by rbeier

  We're installing Microsoft Data Protection Manager 2007 - we'll be using it to back up Exchange and SQL Server among other things. Does anyone know if DPM can also back up Active Directory? It sounds like the answer is "not really". You can install the DPM agent on a domain controller and make system state backups. But if your Active Directory is out of commission, there will be no way to restore the backups, since DPM depends on AD. Currently we're just using Windows Backup (ntbackup) to take system state backups on one of the DCs. Should we just continue with that? Thanks, Richard

  Read the article

• apache name virtual host - two domains and SSL

  - by Tom

  I'm trying to setup Apache(2.2.3) to run two websites with SSL using both different domains and IP addresses. Both websites run fine on port 80 but when I tried to enable SSL for website2 I get a ssl_error_bad_cert_domain error; website2 picks up the SSL cert for website1. Here is my setup in httpd.conf: # Website1 NameVirtualHost 192.168.10.1:80 <VirtualHost 192.168.10.1:80> DocumentRoot /var/www/html ServerName www.website1.org </VirtualHost> NameVirtualHost 192.168.10.1:443 <VirtualHost 192.168.10.1:443> SSLEngine On SSLCertificateFile conf/ssl/website1.cer SSLCertificateKeyFile conf/ssl/website1.key </VirtualHost> # Website2 NameVirtualHost 192.168.10.2:80 <VirtualHost 192.168.10.2:80> DocumentRoot /var/www/html/chart ServerName www.website2.org </VirtualHost> NameVirtualHost 192.168.10.2:443 <VirtualHost 192.168.10.2:443> SSLEngine On SSLCertificateFile conf/ssl/website2.cer SSLCertificateKeyFile conf/ssl/website2.key </VirtualHost> Update: In answer to Shane (this wouldn't fit in comment box) here is the output from apachectl -S: VirtualHost configuration: 192.168.10.2:80 is a NameVirtualHost default server www.website2.org (/etc/httpd/conf/httpd.conf:1033) port 80 namevhost www.website2.org (/etc/httpd/conf/httpd.conf:1033) 192.168.10.2:443 is a NameVirtualHost default server bogus_host_without_reverse_dns (/etc/httpd/conf/httpd.conf:1040) port 443 namevhost bogus_host_without_reverse_dns (/etc/httpd/conf/httpd.conf:1040) 192.168.10.1:80 is a NameVirtualHost default server www.website1.org (/etc/httpd/conf/httpd.conf:1017) port 80 namevhost www.website1.org (/etc/httpd/conf/httpd.conf:1017) 192.168.10.1:443 is a NameVirtualHost default server bogus_host_without_reverse_dns (/etc/httpd/conf/httpd.conf:1024) port 443 namevhost bogus_host_without_reverse_dns (/etc/httpd/conf/httpd.conf:1024) wildcard NameVirtualHosts and _default_ servers: _default_:443 192.168.10.1 (/etc/httpd/conf.d/ssl.conf:81) Syntax OK

  Read the article

• Linux Kernel IRQ Routing with irqbalance / kernel options

  - by tim

  I'm trying to get my Xen Dom0 distributing the irqs in an smp enviroment. As far as I know there are 2 Options: Use irqbalance Configure the kernel without cpu hotplug support My System is Debian Squeeze, Xen 4.0.4, Kernel 3.2.31. My Problem is: irqbalance segfaults due to a changed /proc/irq* layout or irq0 missing (this seems to be a very old bug existing since Lenny) To configure a kernel without cpu hotplug support you must disable cpu powermanagement which seems to be impossible through the standard wys (make config / make menuconfig) - the option CONFIG_PM simply defaults to "Y". Any idea anyone on how to get a debian dom0 kernel with a proper irq distribution?

  Read the article

• Dynamips and Tap Devices, To and From the same machine

  - by Kyle Brandt

  I am setting up a dynamips/dynagen lab and am wondering if there is any way to get traffic to route out one tap devices, go into the lab, and come back to a tap device on the same machine. I have tried host specific routes as well as removing the route created when I give the tun device an ip via ifconfig. With both of these, traffic always preferes the attached devices and won't go through my lab. Any way to make this work without a separate machine or vm?

  Read the article

• In a software update states report in SCCM (MS Updates), what's the difference between "Compliant" a

  - by Jared

  Just wondering what the difference is.

  Read the article

• Remote installation and configuration software, preferrably open source

  - by Brimstedt

  Hello, Im looking for some remote-installation software. I've looked briefly at unattended, opsi and a bunch of stuff, but there is nowhere near enough time to evaluate them all, and they are rather complex to setup so some insight would be very appreciated. This is foremost for windows clients, but linux support would be good. Something like apt-get would've been great. Requirements: Simple to setup and use Set up groups of users (developers, management, sales, etc) Chose which software to be installed for different groups Add new software to groups and it will be automatically installed on client Dependencies between software Nice-to-have: Linux client support OS-unattended installation thanks in advance

  Read the article

• Apache mod_rewrite redirect with prefix

  - by Marc

  I am newbie with Apache's mod_rewrite and I'm having some difficulties getting it to do what I want. In my static directory, I have some javascript files (.js) with 2 kind of filename: xxxx.js which is the standard file name AT_xxxx.js (with prefixed filename) which has been duplicated from previous standard file name but also contains my customizations I would like to parse requests for each standard requested javascript file (xxxx.js) to check if a customized file exists (AT_xxxx.js) including all sub-directories. Then, in this case, use the custom file instead of the standard file (perhaps by internal redirect). I tried to figure this out for hours but something is still wrong. Note: Also, I don't know how to find custom files in sub-directories. DocumentRoot "/data/apps/dev0/custom/my_static" <filesMatch "\\.(js)$"> Options +FollowSymLinks RewriteEngine on RewriteCond %{DOCUMENT_ROOT}/AT_$1.js -f RewriteRule ^(.*[^/])/?$ %{DOCUMENT_ROOT}/AT_$1.js [QSA,L] </filesMatch>

  Read the article

• Split Tunnel VPN using incorrect Tunnel

  - by Brian Schmeltz

  Our company has a handful of field offices that have recently been setup with a regular internet connection after we removed the T1 and router that connected them directly to our network. Now, when the users are in the office, they log in to the VPN to be able to connect to the network. For the sake of them being able to print and scan from the local multi-function we have setup a split tunnel VPN. We currently have about 15-20 users using this setup around the country without any problems. Recently one of our users started having problems accessing internal programs/sites when connecting from both home and the office. There are three other users in the same office and they do not have this problem. I assumed that it was something with the computer and went ahead and replaced it with another of the same model. The computer worked fine in our home office; however, when the user received it, she had the exact same problem both at home and in the field office. Thinking it may be a NIC driver issue I sent her another computer, this time a different model, same problem occurred. If I update the host file to point to the correct paths, things will work, and if I connect via a normal VPN connection everything works, but the user cannot scan or print - which is a problem. Have tried to find ways to create another tunnel on a normal VPN and have tried to find ways to force the correct tunnel on the split tunnel VPN. It appears that there is something related to the ISP because if I connect to Comcast or Verizon it is fine but once she connects to Insite then she has problems. I have been unable to get any support from Insite as they don't feel the issue is with them. We use a Nortel VPN client. Any thoughts or ideas would be appreciated.

  Read the article

• mod_rewrite "Request exceeded the limit of 10 internal redirects due to probable configuration error."

  - by Shoaibi

  What i want: Force www [works] Restrict access to .inc.php [works] Force redirection of abc.php to /abc/ Removal of extension from url Add a trailing slash if needed old .htaccess : Options +FollowSymLinks <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / ### Force www RewriteCond %{HTTP_HOST} ^example\.net$ RewriteRule ^(.*)$ http://www\.example\.net/$1 [L,R=301] ### Restrict access RewriteCond %{REQUEST_URI} ^/(.*)\.inc\.php$ [NC] RewriteRule .* - [F,L] #### Remove extension: RewriteRule ^(.*)/$ /$1.php [L,R=301] ######### Trailing slash: RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_URI} !(.*)/$ RewriteRule ^(.*)$ http://www.example.net/$1/ [R=301,L] </IfModule> New .htaccess: Options +FollowSymLinks <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / ### Force www RewriteCond %{HTTP_HOST} ^example\.net$ RewriteRule ^(.*)$ http://www\.example\.net/$1 [L,R=301] ### Restrict access RewriteCond %{REQUEST_URI} ^/(.*)\.inc\.php$ [NC] RewriteRule .* - [F,L] #### Remove extension: RewriteCond %{REQUEST_FILENAME} \.php$ RewriteCond %{REQUEST_FILENAME} -f RewriteRule (.*)\.php$ /$1/ [L,R=301] #### Map pseudo-directory to PHP file RewriteCond %{REQUEST_FILENAME}\.php -f RewriteRule (.*) /$1.php [L] ######### Trailing slash: RewriteCond %{REQUEST_FILENAME} -d RewriteCond %{REQUEST_FILENAME} !/$ RewriteRule (.*) $1/ [L,R=301] </IfModule> errorlog: Request exceeded the limit of 10 internal redirects due to probable configuration error. Use 'LimitInternalRecursion' to increase the limit if necessary. Use 'LogLevel debug' to get a backtrace., referer: http://www.example.net/ Rewrite.log: http://pastebin.com/x5PKeJHB

  Read the article

• Nginx Server with Ruby on Rails application SMTP Authentication Error

  - by Spoons

  I'm developing a Rails app which when I run it locally, it's able to send emails through a gmail account via smtp. When I moved it to my sever (running Nginx), it comes up with the following error for example when I try to create a new user. Net::SMTPAuthenticationError in UsersController#create 535-5.7.1 Username and Password not accepted. The nginx.conf file remains the same from when I set it up.

  Read the article

• Configuring DNS on my Amazon AWS [closed]

  - by Ricardo

  So, I have an AWS EC2, and I need to configure a dns server, I have a Ubuntu 11.04 and webmin is configured, I have a domin point to my ip. So, know I need to redirect my domain to my ip and configure BIND dns server? What configuration I have to do to redirect my domain account to my ip and create my own dns server? I see some videos on youtube but, i don´t know what is the best of for me. Thank´s for any help.

  Read the article

• Login without running bash_profile or bashrc

  - by Tom Ritter

  So let's say one typoed something in their .bashrc that prevents him (or her) from logging in via ssh (i.e. the ssh login exits because of the error in the file). Is there any way that person could login without executing it (or .bashrc since the one runs the other), or otherwise delete/rename/invalidate the file? Suppose you don't have physical access to the machine, and this is the only user account with the ability to ssh in. For Reference: .bash_profile includes .bashrc: [[ -f ~/.bashrc ]] && . ~/.bashrc Edit: Things I have tried: ssh user@host "rm ~/.bashrc" scp nothing user@host:/RAID/home/tom/.bashrc ssh user@host "/bin/bash --norc" All give the error: /RAID/home/tom/.bashrc: line 16: /usr/local/bin/file: No such file or directory /RAID/home/tom/.bashrc: line 16: exec: /usr/local/bin/file: cannot execute: No such file or directory

  Read the article

• rewrite rule if iphone? [closed]

  - by daniel Crabbe

  hello there. just need one url on my site to check if its a mobile device and then rerite the url accordingly. want to rewrite; /play-reel/miranda-bowen/playpeaches-and-cream to /mobile/play-reel/miranda-bowen/playpeaches-and-cream RewriteCond %{HTTP_USER_AGENT} ^.*iPhone.*$ [NC] RewriteRule ^play-reel(.*)\$ mobile/play-reel$1 [R=302,NC] RewriteRule ^mobile/play-reel/([a-zA-Z0-9\-]+)/([a-zA-Z0-9\-]+)$ play-reel-new-html5-02.php?director=$1&video=$2 [L] # the 3rd line works but cant get the url to change for it to be picked up can anyone see what's wrong? There's no erro best, Dan

  Read the article

• Windows AD, bulk user creation, homedrv creation via commandline

  - by Neil

  I am Bulk creating AD users from the commandline (dsadd) and whilst doing so am setting the homedir and homedrv to a DFS location. I observe when I create the user with all these settings via the GUI (dsa.msc) that the homedrv gets created on the DFS share with all the permissions set correctly. But when using dsadd, the folder is not created. How can I replicate this GUI behaviour via the commandline when creating the user? I don't really want to rely on logon scripts to set it up. Do I have to use mkdir and cacls and something else to give the user Ownership? Or maybe I am missing something easy. Any help much appreciated!

  Read the article

• Classic ASP on large memory server

  - by Steve Evans

  I have a client with a large ASP app that apparently is fairly memory intensive. I’m helping them migrate to new hardware they have running Win2k8 R2. They have 4 physical servers with 32gb of RAM each. I’m making the assumption that ASP apps run as a x32 process. So I see that we have two options: On the application pool enable web gardens. Use the physical servers as VM hosts and split the box into say 4 web servers each. Any thoughts on which path will provide us better performance? I’m just not really sure how ASP will handle a machine with lots of memory, and I’m worried it won’t really be able to address the memory well. (you can ignore all the obvious stuff like increased maintenance of 16 web servers vs 4, or the flexibility virtualization gets us over physical servers, etc)

  Read the article

• How does the LeftHand SAN perform in a Production environment?

  - by Keith Sirmons

  Howdy, I previously asked this ServerFault question: Does anyone have experience with lefthands VSA SAN The general consensus looks like it does not perform well enough for a production SQL server even at a light load. So the new question is, How does LeftHand's SAN perform on the HP or Dell dedicated Hardware boxes? We are looking at the Starter SAN with 2 HP nodes in a 2-way replication, 2 ESX servers hosting a total of 2 Active Directory server, 1 MS SQL server, 1 File Server, and 1 General Purpose Server for things like Virus Scan (All Microsoft Server 2005 or 2008). The reason I am looking at LeftHand is for the complete software package. I plan to have a DR site and like how the SAN can perform an Async Replication to the offsite location without having to go back to the Vendor for more licenses. I also like the redundancy built into the Network Raid architecture. I have looked at other SANS and found different faults with them. For example, Dell's EqualLogic: Found that although the individual box is very redundant in hardware, the Data once spanned across multiple boxes is not redundant, if a node goes down you have lost the only copy of the data sitting on that hardware (One thing is certain, all hardware fails... When? is the only question.). I have used an XioTech SAN as well.. Well worth the money BTW, but I think it is overkill for the size of the office I am targeting. The cost to get the hardware redundancy in the XioTech makes it a little out of reach for the budget I am working in. Thank you, Keith

  Read the article

• rip in RouterSim

  - by Olga Anastasiadou

  I have to design a network given IPs 146.124.0.0/16 and 146.124.10.0/24. My given requirements are : at least 60 more subnets and maximum 1000 hosts per subnet and use of RIP. I have 3 routers (RA1, RA2, RA3) and 3 subnets (Sales, Logistic and Deposit). I gave WAN1 (RA1-RA3): 146.124.10.0/30, WAN2 (RA2-RA3) : 146.124.10.4/30 and WAN3 (RA1-RA2) : 146.124.10.8/30 and Sales : 146.124.0.0/22, Logistic: 146.124.4.0 and Deposit : 146.124.8.0. When I tried to configure RIP protocol, it didn’t work (I use routerSim 6). What am I doing wrong? Can anyone help please????

  Read the article

• Different versions of iperf for windows give totally different results

  - by Albert Mata

  Measuring TCP output from a Windows client to Solaris server: WXP SP3 with iperf 1.7.0 -- returns an average around 90Mbit Same client, same server but iperf 2.0.5 for windows -- returns an average of 8.5 Mbit Similar discrepancies have been observed connecting to other servers (W2008, W2003) It's difficult to get to some conclusions when different versions of the same tool provide vastly different results. Example below: C:\tempiperf -v (from iperf.fr) iperf version 2.0.5 (08 Jul 2010) pthreads C:\tempiperf -c solaris10 Client connecting to solaris10, TCP port 5001 TCP window size: 64.0 KByte (default) [ 3] local 10.172.181.159 port 2124 connected with 10.172.180.209 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.2 sec 10.6 MBytes 8.74 Mbits/sec Abysmal perfomance, but now I test from the same host (Windows XP SP3 32bit and 100Mbit) to the same server (Solaris 10/sparc 64bit and 1Gbit running iperf 2.0.5 with default window of 48k) with the old iperf C:\temp1iperf -v iperf version 1.7.0 (13 Mar 2003) win32 threads C:\temp1iperf.exe -c solaris10 -w64k Client connecting to solaris10, TCP port 5001 TCP window size: 64.0 KByte [1208] local 10.172.181.159 port 2128 connected with 10.172.180.209 port 5001 [ ID] Interval Transfer Bandwidth [1208] 0.0-10.0 sec 112 MBytes 94.0 Mbits/sec So one iperf with a 64k window says 8.75Mbit and the old iperf with the same window size says 94.0Mbit. These results are constant through repeated tests. From my testing launching iperf(old) with window size "x" and iperf(new) with window size "x" instead of producing the same or very close results produce totally different results. The only difference I see is the old compiled as win32 threads vs. pthreads but parallelism (-P 10) appears to work in both. Anyone has a clue or can recommend a tool that gives results I can trust?? EDIT: Looking at traces from (old) iperf it sets the TCP Window Scale flag to 3 in the SYN packet, when I run the (new) iperf this is set to 0 in the initial packet. A quick analysis of the window size through the exchange shows the (old) iperf moving back and forth but mostly at 32k while the (new) iperf mostly keeps at 64k. Maybe it will help somebody to connect the dots.

  Read the article

• Alternatives to auditd and inotify for monitoring file deletion

  - by Tola Odejayi

  I'm trying to figure out which processes are deleting files from a specific directory on my CentOS server. I looked at inotify, but all this does is to tell me how many file deletions are occurring; it does not tell me what process run by which user did the deletions, nor does it tell me when they happened. I also tried auditd, but I have had no luck in getting it set up on my server. Does anyone have any other tool they can suggest that will do this?

  Read the article

• pxelinux hanging when booting client machine

  - by Blasphemophagher

  I'm kind of new to all of this, so please forgive any vagueness/misunderstandings on my part. I'm using pxelinux and VMs to create CentOS 6.0 machines that have the same install every time. I have a new VM set to boot from network, but in the process of booting up it gets stuck at "Loading 10.1.1.20:/pxelinux.0" (10.1.1.20 is the address of the server it's getting info from). pxelinux conf: http://pastebin.com/4XfZZPY1 I'm pretty sure all my config files are correct, could it be VirtualBox related? I have both the building server and the new client set to Host-only adapter and PCNET-FAST.

  Read the article

• downloading a file from the internet

  - by eugene

  when iam downloading a file from the internet it stops after some time usually around 14%

  Read the article

• Sendmail is refusing connection after configuring SMTP relay

  - by coder

  I'm setting up sendmail on my home computer to use with my webserver. I've set it to use my SMTP server provided by my hosting company. If I use the following command, it works sendmail -Am -t -v and then I enter the to and from emails. But if I try the following, it does not work. sendmail -v [email protected] < test.txt The TO email is the same as in the earlier command, but in this case I haven't specified a FROM e-mail, which I think is the problem. My guess is that it's sending the mail from user@localhost causing the smtp server to reject it. If so, how do I make it send from [email protected]?

  Read the article

• Node.js on via DynDNS

  - by Azincourt

  I have never used Node.js but since I am developing a browsergame that needs (almost) "realtime" communication, I am planning on using Node.js for this. To get started, I wanted to use a home server (normal computer) that is conntected to a dynamic IP via DynDNS. Are there the disadvantages using such a setting? What is the best way in combination with Node.js to store game status for a online game session?

  Read the article

• Defragment / Performance Monitor without Task Scheduler

  - by mjaggard

  My organisation has a policy of disabling Task Scheduler on all servers and workstations (don't ask, I tried once to wrestle the pig). I need to collect performance stats using Data Collector Sets in Windows 7 or Windows 2008 but the Performance Monitor interface requires Task Scheduler to be running. Is this possible because I'm not trying to schedule anything (except the collection of WMI information every 15 seconds but I doubt it hands that task off to the task scheduler)? Is there any way to trick it into thinking Task Scheduler is running? If not, is there any way to temporarily override the group policy to allow Task Scheduler to run? I've found that most group policy can be overridden in this way by an Administrator by editing the registry. On exactly the same vein, I want to defragment a hard disk on one of my workstations, but I can't get it to start because of the dependancy on Task Scheduler - is it possible to overcome this?

  Read the article

< Previous Page | 429 430 431 432 433 434 435 436 437 438 439 440  | Next Page >