Search Results

Search found 13022 results on 521 pages for 'antivirus tools'.

Page 435/521 | < Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >

• Western Digital HDD disappears and reappears in BIOS

  - by tbkn23

  I know many people asked about similar problems, but I have a very specific case where I can't understand what's going on... I have a 3TB Western Digital Caviar Green disk connected in my Desktop, that also has a seagate 1.5TB disk and 2 SSD drives (OCZ and Sandisk). After working fine for quite some time (probably more than a year), suddenly my Caviar Green drive disappeared from windows. I checked the BIOS, and it wasn't there either. I opened my PC, played with the connectors, power, etc, but nothing helped. Even tried switching connectors with those of the 1.5TB disk, and nothing changed, the 1.5TB seagate was there, but the 3TB WD was not. Ok, now for the strange part. I have another desktop at home, so I took out my 3TB drive, connected it there, and it worked fine! I copied the most important files out of it, and then made another attempt in the original desktop. Surprise! It now appeared in the BIOS and worked fine! I even ran the SMART test with the WD tools and it said everything was intact. It doesn't end here. After leaving it overnight in the original desktop, it disappeared again in the morning. I repeated the entire process, connecting it to the second desktop, and there it is again working fine. Now for my question... Whats going on? The disk seems to be appearing on/off in my original Desktop, while other drives there work fine. SMART test says the disk is fine. Any ideas? Is the disk defective and should be replaced? Or maybe there's a problem with the controller in the desktop? I'm using a Gigabyte GA-880GA-UD3H motherboard and tried connecting the drive to both bridges (SATA2 and SATA3 bridges). Thanks EDIT: Power options are set never to turn off hard drives:

  Read the article

• Hard Drive that was used before not detected or accessible in Windows 7

  - by Anders

  Hello SU: My PC crashed for some unknown reason, and I am still working on what caused that. However, I pulled my main (windows) drive from my computer and hooked it up to my roommate's machine and was able to pull the data I needed off of it (i.e. the drive is good). I hook up his drives as they were, I had to turn off his machine and unplug his secondary drive to hook mine up, boot his machine and there is no second drive available in windows explorer. I opened Device Manager to see if for some reason it's drive letter got un-assigned, but there is nothing listed in there except his primary hard drive, his optical drive and one other optical drive which I believe is the virtual drive Daemon Tools made. The drive shows up in the BIOS, however after I restarted his machine again it sits on the "Entering setup....." screen at the load window. The only thing I can think of is that may have messed with stuff is I used this tutorial to create a bootable XP install on a USB drive to install XP on my machine (I am 99% certain that the optical drive in my PC is broken) and maybe it used the other hard drive's letter for the USB drive for some reason, which doesn't make much sense since it was recognized it as a different drive letter before I started the process. It is possible that it used the secondary hard drive's letter for it's work, but once again I am uncertain. Where should I go from here? He his bound to wake up within the next several hours and will probably flip a lid if I cannot get some sort of handle on this. Any and all help is greatly appreciated. PS: Anyone who helps me get this situated has a beer or two on me, as long as you are in the greater metro Detroit area, or don't mind traveling a bit!

  Read the article

• Postfix + Exchange + ActiveDirectory; How to mix them

  - by itwb

  My client has got many sub-offices, and one head office. The headoffice has a domain name: business.com All users in the many sub-offices need to have a headoffice email address: [email protected] Anyone not in the head office will need the email forwarded to an external email address. All users in the head office will have their email delivered to Microsoft Exchange. Users are listed in Active Directory under two different OU's: HeadOffice or SubOffice. Is this something able to be configured? I've done some googling, but I can't find any examples or businesses set up this way. Edit: Postfix will accept all email, will need to determine to forward the email to an external account or alternatively have it delivered to MS Exchange. I've done some reading about MS Exchange and that you can 'mail-enable' contacts for forwarding - but I don't know if each AD account requires an Exchange CAL? The end goal is to forward email to external accounts to sub offices or accept email for head office. Maybe I don't need to worry about Postfix to perform this task..... http://www.windowsitpro.com/article/exchange-server-2010/exchange-server-licensing-some-of-your-questions-answered "What about client access licenses (CALs)? You need one CAL per user who will connect to Exchange. Although it might not be 100 percent precise, I prefer to think of it as one CAL per mailbox; there are exceptions for users outside your organization, automated tools that use mailboxes, and so on. Exchange doesn't enforce this limit, so it's on you to ensure that you have the correct number of CALs for the set of clients you support."

  Read the article

• ADUC Exchange tabs - Windows 7 & Exchange 2003

  - by John Gardeniers

  I have the admin tools install on a Win 7 64 bit machine but would like to see the Exchange tabs in ADUC. Googling shows this is a popular request and the most common solution (and the only one which appears to work to all) is to install Exchange Server Management for Vista using esmvista.msi /q. That may well have worked on beta versions of Win 7 but is definitely not working with my OEM copy of Win 7. Can this perhaps be made to work by installing from an Exchange 2007 CD (which I don't have at this time), bearing in mind that we have Exchange 2003 only? Can someone please offer a solution that works? I figure some of you must have solved this by now. Edit: I don't know if this is relevant or not but the Win 7 machine is also running Office 2010 Pro. About the bounty I had intended to award the bounty to gWaldo for having taken the extra steps to try to help me with this issue. However, as I was about to do so my screen started scrolling and I actually clicked on the answer posted by natxo asenjo, who's answer offended me, without realising it. Perhaps if I wasn't rushing I might have noticed but that's now history.

  Read the article

• Intermittently uncommunicative subnets

  - by mhd

  Last week proved me a veritable Cassandra: I've always said that it's a bad idea to have only one firewall/router, without a backup or failover. And thus our Cisco PIX went haywire, refusing to route properly. And of course, the only one available here on short notice is me, and while I'm quite grounded in Linux, I'm really a developer not a sysadmin (the fact that this hit me on sysadmin appreciation day is a bit ironic). Anyway, this weekend I tried to hack up a temporary solution: I used an old server with enough NICs (two built-in, four on a card) to serve as a gateway and firewall. Due to some problems with the raid controller, I got only two router distros running, and between Untangle and Ebox I decided for the latter. Now everything is quite okay. I've got all the different subnets we've got here (all with separate switches) talking to each other and even to the internet (Cisco 2800 router, T1 lines). But from time to time (20-60 minute intervals), I get a total routing failure. Our main, office subnet can't talk to our server subnet and can't connect to the internet. This is not the end of a gradual slowdown, either everything's working perfectly or I get a total lack of communication for about two minutes each time. Now I'm a bit at wits end what to check. At least with the default EBox setup, nothing in /var/log shows anything weird and it doesn't exactly have lots of built-in monitoring tools. So I'm hoping someone here could give me some pointers about what to look out for. I did change the ethernet cable from the office switch to the firewall, with no results. I might change switches, although within the switch it seems to work ok enough. Edit: I'm not sure whether this is the sole cause of the problem, but after I noticed a few DHCP entries just before the last drop of connectivity, I tried to reproduce that. And alas, whenever I renew a DHCP connection, I can't access other subnets anymore. Running ISC DHCPD 3.0.6.

  Read the article

• Windows based development environment: HyperV, VMWare, or VirtualBox on development machine?

  - by bleepzter

  I am a software engineer with a little bit of an informal "support" functionality... I am trying to figure out what is the best possible approach to employing virtualization technologies into our development process. Since the code we develop is server-centric, testing it often requires a VM with specific software requirements. I used to use VM Ware player (free version) to run my VM's until both of my laptops started exhibiting issues with corrupted windows 7 services and dying hard drives. All leads pointed to VMWare, which by the way seems to be a solid product if you pay for the Workstation edition ($300). On a side note, I have always been a fan of the Windows Server product line. I think it makes for one of the best development environments out there - it is highly scalable, highly reliable, and very efficient. So to be fair I replaced the drives of the laptops and installed Windows Server 2008R2, VS2010 Ultimate SP1, SQL Server 2008R2, TFS Server 2010 and all other tools and API's needed do do my work properly. So now I am stuck with a bunch of VMWare VMs. I don't want to repeat of what happened before, and I certainly don't want to bog down my machine with an inefficient hypervisor or services that are not needed. Futhermore the VMDK hard-disk format used by VMWare is not compatible with the VHD format of Hyper V. It is my understanding that converting from one format to the other can only happen by Microsoft System Center Virtual Machine which I have downloaded from MSDN and ready to install. I guess the question at this point is: Does SCVM run as another service in Windows? Is it a memory hog? What is a better virtualization technology - Hyper-V or Virtual Box in terms of efficiency ease of use and most importantly - memory footprint? (Keep in mind the development environment already has a ton of services running such as TFS Server, SQL Server, IIS, etc...) How would you advise to proceed at this point so that the VMs are still used in the test process? Thanks Martin

  Read the article

• Advice on Computer Specs for overall development/general use machine

  - by Ender

  At the moment I am restricted to a laptop with 512MB of RAM, a 120GB HDD and a 1.5GHz Intel processor for all my development and general browsing needs, and as you can probably tell using it for anything modern is a painful experience. As a result I've decided to buy myself a new desktop computer, one that will stand the test of time and one that can be upgraded easily. Rather than build the machine myself I've decided to go through Dell as I've had good experiences with them when purchasing computers for my family. I've had my eye on this as it's got a good amount of RAM, has a decent-rated processor and isn't priced too badly. http://www1.euro.dell.com/uk/en/home/Desktops/inspiron-580/pd.aspx?refid=inspiron-580&s=dhs&cs=ukepp1&~oid=uk~en~20211~inspiron-580_d005827~~ Intel® Core™ i5 Processor 750 (2.66GHz, 8MB) Genuine Windows® 7 Home Premium 64bit - English Display Not Included ATI Radeon™ HD 5450 1GB DDR3 graphics 6144MB Dual Channel DDR3 [3x2048] Memory 1TB (7200rpm) SATA Hard Drive DVD +/- RW Drive (read/write CD & DVD) with DVD Burn software 1 year of coverage included with your PC McAfee® Security Centre - 15 Month Protection - English After the pain of using a slow laptop for all this time the main thing I want is speed. I may look to play a couple of basic games on it, nothing too powerful. Obviously I'll be doing some development on it too so it'll have to be able to handle the latest IDE's and Database tools like SQL Server pretty quickly. Finally, should I ever need to improve it I'd like to be able to add more RAM and change some of the parts. I wouldn't have thought this would be a problem but a few people I've spoken to have said that the amount of RAM the motherboard can handle isn't that great. Is this true? How long can I expect to be using this computer before it's too slow? Thanks in advance for the help.

  Read the article

• Weblogic WLST classpath

  - by lepricon28

  When I run the WLST script .sh script to set the env as follows why can't I see the updated path when I do echo? [linbox2 bin]$ ./setWLSEnv.sh CLASSPATH=/directory/ols_wls/patch_wlss1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/directory/ols_wls/patch_wls1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/directory/ols_wls/patch_oepe1032/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/directory/ols_wls/patch_ocm1031/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/directory/ols_wls/jrockit_160_14_R27.6.5-32/lib/tools.jar:/directory/ols_wls/utils/config/10.3/config-launch.jar:/directory/ols_wls/wlserver_10.3/server/lib/weblogic_sp.jar:/directory/ols_wls/wlserver_10.3/server/lib/weblogic.jar:/directory/ols_wls/modules/features/weblogic.server.modules_10.3.2.0.jar:/directory/ols_wls/wlserver_10.3/server/lib/webservices.jar:/directory/ols_wls/modules/org.apache.ant_1.7.0/lib/ant-all.jar:/directory/ols_wls/modules/net.sf.antcontrib_1.0.0.0_1-0b2/lib/ant-contrib.jar: PATH=/directory/ols_wls/wlserver_10.3/server/bin:/directory/ols_wls/modules/org.apache.ant_1.7.0/bin:/directory/ols_wls/jrockit_160_14_R27.6.5-32/jre/bin:/directory/ols_wls/jrockit_160_14_R27.6.5-32/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/java/j2sdk1.4.2_11/bin/bin:/home/oracle/bin:/directory/wls_olwcs/jdk160_14_R27.6.5-32/bin:/directory/ccanywhere81/bin:/directory/oracle/oracle/product/10.2.0/client_1/bin Your environment has been set. [linbox2 bin]$ export CLASSPATH [linbox2 bin]$ export PATH [linbox2 bin]$ echo $PATH /usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/X11R6/bin:/usr/java/j2sdk1.4.2_11/bin/bin:/home/oracle/bin:/directory/wls_olwcs/jdk160_14_R27.6.5-32/bin:/directory/ccanywhere81/bin:/directory/oracle/oracle/product/10.2.0/client_1/bin [linbox2 bin]$

  Read the article

• Asus PCE-N53 11n N600 PCI-E Adapter on 3.x kernel

  - by CITguy

  Problem ASUS PCE-N53 wireless NIC doesn't work for latest versions of the linux kernel. How do I get it working on my system? (Note: I'm posting the answer I've found for others to use.) Installing Driver for Linux 3.x Kernel ASUS provides Linux drivers from their website, but it mentions that the driver supports "Linux Kernel 2.6.x", so it won't work without a some modifications to the driver code. Fortunately, an archlinux forum mentions similar problems and one user was able to create a patch for kernel 3.8.x that seems to work with kernel 3.11.x. Here's how I got it working: Prerequisites Ubuntu: sudo apt-get install build-essential Arch: sudo pacman -S base-devel Steps: 1. Download the driver from the ASUS website The download can be found under "Support Drivers & Tools". 2. Unzip the contents of the downloaded file cd into the new directory 3. Patch The arch forum mentions a 3.8 patch file that needs to be downloaded. Download rt5592sta_fix_64bit_3.8.patch to the current directory. tar -xvf {driver_source.tar.gz} cd into the directory created in previous step patch -p1 < ../rt5592sta_fix_64bit_3.8.patch 4. Compile NOTE: You will need to use sudo for it to compile properly. sudo make sudo make install sudo modprobe rt5592sta 5. Enjoy If all is well, you should now have a working card.

  Read the article

• Win7 'locking' process/files/folders?

  - by Dynde

  I've had a fair bit problems with sometimes files/folders/processes being 'locked' by Windows. The weird thing is, it's not like the traditional sense, I think, where tools like UnlockIT and wholockme would work. It seems that just giving it a little often helps - making me think it could either be the HDD, the memory, or something in Windows. A scenario: I go into a folder - don't open anything at all, go back up, cut or drag-move the folder to someplace else, it says "Action can't be completed because the folder or a file in it is open in another program". Waiting sometimes 20 seconds sometimes a little longer, and I can move it. Another scenario is deleting a bunch of files in a folder, and it appears that everything is gone, but then suddenly after a few seconds an .exe file pops back up, and I can't delete it. Waiting a few minutes, then pressing refresh and it's gone. I have the strangest feeling that there's a problem with either HDD or memory. I already tried disabling Windows indexing service with no luck. Does anyone have any ideas? EDIT: I should say, that I have a very fast system, 16 GB DDR3 RAM, i7-2600k CPU, SSD main HDD, so I really should not be experiencing any sort of problems, where one might say that it's "reasonable" for the system not to respond right away. Edit2: And I updated SSD firmware a couple months ago, so it shouldn't be bad release FW either

  Read the article

• Problem with ubuntu 10.10 running from USB drive

  - by Surjya Narayana Padhi

  Hi Geeks, I recently downloaded Ubuntu 10.10 and created an USB drive with that. I started to run the Ubuntu from that USB drive. But I am facing so much problem. I am thinking why its not so much easy like Windows to do all my job in ubuntu. Always I get some error message or to install something. This time I am getting the following errors. I am trying to download and install Aircrack-ng. So used the command sudo apt-get install aircrack-ng. But the installation stops with the following error : update-initramfs: deferring update (trigger activated) cp: cannot stat `/vmlinuz': No such file or directory dpkg: error processing bcmwl-kernel-source (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools bcmwl-kernel-source E: Sub-process /usr/bin/dpkg returned an error code (1) I don't even have the aptitude command installed till now. Are all these errors because of I am running the ubuntu from USB drive? Is there any simple and easy way to go to Ubuntu Software Center and download all the required essentials at one shot and then Aircrack-ng? I could not find the Aircrack-ng in Ubuntu Software Center Can anybody give me detail steps to solve all my problems above. I am frustrated searching for updates and installations. When something works and something does not work. Can anybody suggest me how I should proceed after installing ubuntu to run on a USB drive. So that I can use the OS like Windows. Like software download,wireless driver, sound, video, documents, C:, D: all things should be there. Please somebody help.

  Read the article

• Extract sender activity from postfix logs for auditing user

  - by Aseques

  We have a mail user on our postfix server that was using the company mail to send compromising information to the competence. I've been asked to make a report of the actions for that user in the last time. There are tools like pflogsumm and others that can extract statistic data, but I haven't so far find anything useful to get all the info for a user because the data is in multiple lines. I'd like to get something like this: For the sent mail 11/11/11 00:00:00 [email protected] -> [email protected] 11/11/11 00:00:01 [email protected] -> [email protected] For the received mail 10/10/11 00:00:00 [email protected] -> [email protected] 10/10/11 00:00:01 [email protected] -> [email protected] I know I can do a script by myself, but matching the postfix ID for every mail is not something that can be made with a simple grep, and I've a lot of mail history that I have to recheck distributed among diferent files and so on. The source log is the standard postfix format, for example this one... Sep 13 16:15:57 server postfix/qmgr[18142]: B35CB5ED3D: from=<[email protected], size=10755, nrcpt=1 (queue active) Sep 13 16:15:57 server postfix/smtpd[32099]: disconnect from localhost[127.0.0.1] Sep 13 16:15:57 server postfix/smtp[32420]: 58C3E5EC9C: to=<[email protected]>, relay=127.0.0.1[127.0.0.1]:10024, delay=1.4, delays=0.01/0/0/1.4, dsn=2.0.0, status=sent (250 2.0.0 Ok, id=32697-04, from MTA([127.0.0.1]:10025): 250 2.0.0 Ok: queued as B35CB5ED3D) Sep 13 16:15:57 server postfix/qmgr[18142]: 58C3E5EC9C: removed Sep 13 16:15:57 server postfix/smtp[32379]: B35CB5ED3D: to=<[email protected]>, relay=mail.anothercompany.com[123.123.123.163]:25, delay=0.06, delays=0.03/0/0.01/0.02, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as 77D0EB6C025) Sep 13 16:15:57 server postfix/qmgr[18142]: B35CB5ED3D: removed

  Read the article

• How can I prevent a DDOS attack on Amazon EC2?

  - by cwd

  One of the servers I use is hosted on the Amazon EC2 cloud. Every few months we appear to have a DDOS attack on this sever. This slows the server down incredibly. After around 30 minutes, and sometimes a reboot later, everything is back to normal. Amazon has security groups and firewall, but what else should I have in place on an EC2 server to mitigate or prevent an attack? From similar questions I've learned: Limit the rate of requests/minute (or seconds) from a particular IP address via something like IP tables (or maybe UFW?) Have enough resources to survive such an attack - or - Possibly build the web application so it is elastic / has an elastic load balancer and can quickly scale up to meet such a high demand) If using mySql, set up mySql connections so that they run sequentially so that slow queries won't bog down the system What else am I missing? I would love information about specific tools and configuration options (again, using Linux here), and/or anything that is specific to Amazon EC2. ps: Notes about monitoring for DDOS would also be welcomed - perhaps with nagios? ;)

  Read the article

• Liked Arch Linux - but I am still not sure if its the right distro for me...

  - by BlackAndGold

  As the title says... I used Arch Linux for a while and liked it a lot: leightweight, sleek, fast and well documented with a great community. However I had to format my hd and for the sake of being too lazy to reinstall arch, I used windows 7 exclusively for a while. Now I want to get back to linux again (still dual boot), mainly for web development purposes and using handy tools such as rsync ect. Again, I liked Arch, but there is too much tweeking, too much reading up and too much figuring out what to do as well es some bad suprises especially when you need them the least and when just quickly want to get some work done. I kind of would like to have a little more "out of the box" distro that is still fast and somewhat leighweight and of course reliable. I actually considered Ubuntu, which I am not too big of a fan of, but I will still give the minimal install a shot. However other distros seem interesting as well, such as crunchbang and mint debian ecpecially. My question, hoping this isn't too boring for many you, what is the right distro for me?

  Read the article

• Mac dev folder missing, SSH not working

  - by SamGoody

  A few days ago, SSH stopped working. When I try logging in a get the following message: PTY allocation request failed on channel 0 stdin: is not a tty fatal: unrecognized command '' Connection to 74.52.61.194 closed. Web searches have shown me that there might be something wrong with /dev/std. But my computer lacks a /dev/ drive. There is an Alias to /dev/ [hidden, but I've revealed hidden files to do this search], but when I try to open it I am told that it cannot find the folder it is aliasing. Now, many a web search tells me that without a dev folder, the computer doesn't work, but it does seem to work, except the SSH. Also, are there any tools that can save my SSH preferences so that I don't have to, each time, type out the username@adrees, password, path all of which are long and complex? Not looking for a Filezilla type client, there are many of those. Looking for a command line like putty, that lets me use bash on the remote client. Am on Macbook Pro, latest version of Tiger.

  Read the article

• High memory utilization with firebird + windows server 2008 r2

  - by chesterman

  i have a Windows Server 2008 R2 (64bit) running a 64bit installation of Firebird 2.1.4.18393_0 in a 4GB phisical server. After a while, the task manager show that all memory is used, but the sum of the memory of all process does not stack to the half of the memory. Unfortunally, it's start swapping. Using RAMMAP, i can see that my entire database file is mapped into the memory. This only occours in windows server 2008 r2 and windows 7 64 bit. i can use firebird 32 or 64bit installations, doesn't matter. How can i prevent this? Why this only occours in w2k8r2 and w7? tks in advance ** UPDATE Aparently, this occours by the use of all memory by the file system cache. The microsoft documentations explain that this WAS a issue in windows xp, 2k3, vista and 2k8, but it was solved in 7 and 2k8r2. also adds that this issue is more common in 64bit hosts. (http://support.microsoft.com/kb/976618) there are some tools (DynCache, setcache and the Get/SetSystemFileCacheSize system calls from windows API) that allows me to fix a upper limit to the memory usage by the fscache, but the documentation argues that i should not do this in w2k8r2 because it will severely impact on the overall system performance. anyway, i tried, the performance remained the same shit and the use of the page file remained, although there is now more the 1gb of free memory.

  Read the article

• XP VM not detecting USB keyboard or mouse from Windows 7 host

  - by Ian Kemp

  I've been using a Windows XP Pro VM (32-bit, SP3) for months on my work PC (Windows 7 64-bit) with no problems, with a PS/2 keyboard and a standard optical USB mouse. Today I copied this VM onto my home PC, which is also Windows 7 64-bit but with a G15 USB keyboard and MX518 USB mouse. For some reason the VM does not accept input from the keyboard or mouse, which makes it almost impossible to use. (Unity works but is not an option). Both my home and work PC are running VMware player 3.1.0. My keyboard and mouse show up as USB devices in the bottom-right of the VMware Player window, and if I click them I have the standard option to "Connect (Disconnect from host)". I have selected this option for the keyboard, and then the VM happily accepts keyboard input, but of course my host PC no longer does. It seems like VMware is seeing my keyboard and mouse as USB devices and not input devices. I've tried sending the keyboard input to the guest and reinstalling VMware Tools, but that achieved nothing. I'm certain it's a problem with the VM, and not the XP install, as I also can't use F12 to enter the VMware BIOS when the VM is powering up.

  Read the article

• VMware Workstation "Power off" and "Suspend" buttons are disabled. What is going on?

  - by Ed Norris

  I've been using an XP image for a few months now with no problems. Recently the power off and resume buttons were disabled and I'm not sure what happened to cause that. In addition, the menu items to do those functions are grayed out (like VM | Power | Power Off) I'm using VMware Workstation 6.5.3 on a Windows 7 64-bit host. The image is Windows XP 32-bit. There is plenty of free space and memory on the host and the CPU is not pegged. I am able to power off the image through its Start menu, but that's a workaround not a fix. Any suggestions? TIA EDIT: Well after manually shutting down the image then closing and reopening the image file (which I've done before) in preparation for reinstalling the tools as suggested below, it looks fine. The power off and suspend buttons are enabled and work. So what do I do with this question now? "Close and restart a few times and it may work" doesn't seem useful...

  Read the article

• Recover data from quick formatted DVD-R

  - by Andrii Kalytiiuk

  I need to recover data from quick-formatted DVD-R. Please advise a free of charge option (cheap commercial tools will be ok either). Disk was partially recorded with Windows built in disk recorder and recording most likely was not complete. Afterwards I have inserted partially recorded DVD again and on Windows recorder's message box 'How to use this disk?' selected - 'use for CD/DVD player' and data was completely lost - as new recording session was started. Files of photos were recorded on disk. What I have tried so far: DiskInternals CD-DVD recovery - sees 5 jpg files but can't show preview. Tool is commercial - trial version does not allow to recover files. CDCheck - doesn't see any files and reports errors at attempt to scand DVD CD Recovery Toolbox Free - does not even recognize DVD drive ISO Buster - recognizes two files - one MP3 file for 99% of recorded size and one ARC file for about 100 KB MiniTool Power Data Recovery - Free Edition - does not see any files on DVD Stellar Phoenix CD DVD Data Recovery - does not see any files BinaryBiz Virtual Lab - sees DVD disk but needs license to browse content Please advise how is it possible to recover files from DVD.

  Read the article

• Does anyone know how to "tcpdump" traffic decrypted by Mallory MITM? [migrated]

  - by chriv

  I'm looking for some help in capturing network traffic that I can analyze in Wireshare (or other tools). The tool I'm using is mallory. If anyone is familiar with mallory, I could use some help. I've got it configured and running correctly, but I don't know how to get the output that I want. The setup is on my private network. I have a VM (running Ubuntu 12.04 - precise) with two NICs: eth0 is on my "real" network eth1 is only on my "fake" network, and is using dnsmasq (for DNS and DHCP for other devices on the "fake" network) Effectively eth0 is the "WAN" on my VM, and eth1 is the "LAN" on my VM. I've setup mallory and iptables to intercept, decrypt, encrypt and rewrite all traffic coming in on destination port 443 on eth1. On the device I want intercepted, I have imported the ca.cer that mallory generated as a trusted root certificate. I need to analyze some strange behavior in the HTTPS stream between the client and server, so that's why mallory is setup in between for this MITM. I would like to take the decrypted HTTPS traffic and dump it to either a logfile or a socket in a format compatible with tcpdump/wireshark (so I can collect it later and analyze it). Running tcpdump on eth1 is too soon (it's encrypted), and running tcpdump on eth2 is too late (it's been re-encrypted). Is there a way to make mallory "tcpdump" the decrypted traffic (in both directions)?

  Read the article

• Nginx flv audio pseudo stream works but video is not loading

  - by sarah

  I am working on a development server for a company & they want nginx webserver to work with. So the requirements for their company is, it should be capable of doing following things i.e hotlink protection, mp4 & flv pseudo stream & secure streaming. However nginx fulfills their requirements and i am configuring their server from past 2 days as i am new to this field so i've only acheived hotlinking prevention in past 2 days. But the problem on which i am stuck is flv pseudo streaming, to make work to mp4 pseudo stream it was just a piece of paper but i am really fuc*ed up with flv pseudo stream. I have converted my flv videos with flvmdi tools to insert many keyframes but the problem is , when i try to seek video from following keyframes that are generated by flvmdi i.e test.flv?start=2681223, video does not load but audio pseudo works fine. So it means no problem with my flv configuration in nginx.conf file. And the forum that i used to compile my nginx-1.2.1 is http://h264.code-shop.com/trac/wiki/Mod-H264-Streaming-Nginx-Version2 & by adding additional module --with-http_flv_module. This forum is really active, hopes i will resolve my problem as soon as you guys will provide me some guide.

  Read the article

• rpmbuild gives seg fault

  - by Deepti Jain

  I am trying to build an rpm using the rpmbuild tool. I have source code which build binaries around 30 GB. This software for which I am making the rpm has dozens of executables. When I copy only the binaries of a single executable (Eg. init) my rpm builds successfully. But when I dump the entire build to the rpm, rpmbuild does everything but gives a seg fault in the end. Here is my spec file: # This is a sample spec file for wget %define _topdir /root/mywget %define name source %define release 1 %define version 1.12 %define _builddir /root/mywget/BUILD/glenlivet %define _buildrootdir /root/mywget/BUILDROOT %define _buildroot /root/mywget/BUILDROOT %define _sourcedir /root/mywget/SOURCES BuildRoot: %{_buildroot} Summary: GNU source License: GPL Name: %{name} Version: %{version} Release: %{release} Source: %{name}-%{version}.tar.gz Prefix: /usr Group: Development/Tools %description The GNU sample program downloads files from the Internet using the command-line. %prep %setup -q -n glenlivet %build cd %{_builddir} make all %install rm -rf %{_buildrootdir} mkdir -p %{_buildrootdir}/bin cp -p -r %{_builddir}/build/obj-x64/* %{_buildrootdir}/bin/ %files %defattr(-,root,root) /bin/* If I only copy some of the binaries (let say one utility and its dependent binaries) it works fine. But when I try to copy the entire build, I get a seg fault. I get the seg fault after rpmbuild has executed these sections: %prep %build %install rpmbuild also processes my source file. Processing files: source-1.12-1 Finding Provides: Finding Requires: Finding Supplements: Provides:...... Requires:...... Checking for unpackaged file(s):/ usr/lib/rpm/check-files /root/mywget/BUILDROOT Checking for unpackaged file(s):/ usr/lib/rpm/check-files /root/mywget/BUILDROOT Segmentation fault Any clue what wrong is going on or where does rpmbuild fails? Thanks in advance

  Read the article

• Wifi Works with Android and Windows 8 but not Linux and Win 7

  - by eramm

  Support has told me that our company wide wifi network is setup to support mobile phones only. However it doesn't make sense to me that they can identify a mobile device rather they have setup the Access Point to use a protocol that is only supported on Android and Windows phones. Because the Access Point supports Windows mobile this means that laptops running Windows 8 can also connect to the Access Point (proven). So it stands to reason that since Android is based on Linux there must be a way to connect using Linux as well. iwlist shows IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : TKIP CCMP Authentication Suites (1) : 802.1x WIreshark seems to show that a connection is being made to a website to get a certificate and use a Domain Controller for authentication. Questions: 1) what protocol could they be using that is supported on Win Mobile and Android but not on Win 7 and Linux (Debian) ? 2) what tools can I use to help me discover what protocol i need to support ? I have used iwlist and wireshark but I was not able to glean to much useful information from them. I can post the results if needed. 3) is there an app i can use on my Android phone to help me understand what kind of network it is connecting to ? I can provide more information if you tell me how to get it. I just don't know what I am looking for.

  Read the article

• How do you recreate the System Recovery environment in Windows 7?

  - by Howiecamp

  I'm running Windows 7 Home Premium RTM (64-bit) and I want to take advantage of the system recovery tools (eg the Command Prompt) without using the Windows 7 DVD. My understanding is that this environment (WinRE) should be installed to your HDD by default as part of the Windows 7 installation. However, when I hit F8 on boot and select "Repair", I get: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem... Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible. The "Info" line seems like the smoking gun. My next step was to boot from the Windows 7 DVD, and choose "Repair". It indicated my Recovery Environment wasn't on the Windows 7 boot menu (perfect) and offered to fix it. I said yes and rebooted, however same issue as above. In addition, when I booted in to Windows 7 and I looked at the boot menu options, the recovery/repair option was not there. Only my Windows installation. Finally, I ran the Disk Management tool (diskmgmt.msc) and took a look at the contents of my "System Reserved" partition (which was set to "Active" as normal). It's unclear to me what the contents should look like, however it is my understanding that the WinRE environment gets installed to this partition. (As part of the above troubleshooting I followed http://superuser.com/questions/25728/how-to-fix-windows-7-boot-process which lead to http://www.sevenforums.com/tutorials/668-system-recovery-options.html).

  Read the article

• Backup data from RAID 1 disk out of its server

  - by Doomsday

  I'm facing with a pretty easy problem in my opinion. I've extracted a working disk from a RAID1 and I'm looking to copy only data (FS and RAID configuration doesn't matter) into another location (another FS). My problem is I'm not able to mount properly this disk into another linux. I've first looked the partition table : # fdisk -l /dev/sdc Disk /dev/sdc: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 63 1249535699 624767818+ fd Linux raid autodetect /dev/sdc2 1249535700 1250017649 240975 fd Linux raid autodetect /dev/sdc3 1250017650 1250258624 120487+ 82 Linux swap / Solaris I've understood I should use dmraid tools. Once installed : # cat /proc/mdstat Personalities : md0 : inactive sdc1[1](S) 624767744 blocks unused devices: <none> And some other informations : # mdadm --examine /dev/sdc1 /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 8f292f54:7e5aef72:7e5ab5fd:b348fd05 Creation Time : Mon Jun 2 03:39:41 2008 Raid Level : raid1 Used Dev Size : 624767744 (595.82 GiB 639.76 GB) Array Size : 624767744 (595.82 GiB 639.76 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Update Time : Tue Feb 7 22:34:59 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : a505b324 - correct Events : 15148 Number Major Minor RaidDevice State this 1 8 1 1 active sync /dev/sda1 0 0 8 17 0 active sync /dev/sdb1 1 1 8 1 1 active sync /dev/sda1 From here, I've tried to mount but I'm not comfortable with dmtools and how it's working. # mount /dev/sdc1 /mnt/sdc1 mount: unknown filesystem type 'linux_raid_member' # mount /dev/md0 /mnt/sdc1 mount: /dev/md0: can't read superblock I've seen some options to alter RAID array with mdadm but I only want to copy data on its filesystem before wiping them... Anyone has a clue ?

  Read the article

< Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >