Search Results

Search found 14422 results on 577 pages for 'fix'.

Page 437/577 | < Previous Page | 433 434 435 436 437 438 439 440 441 442 443 444  | Next Page >

  • Windows 7 starts getting sluggish over a few days

    - by munrobasher
    Myself and the other developer are running Windows 7 Enterprise 64 bit with 8GB RAM on different Gigabyte motherboards with Quad core Intel CPUs. Most of the time, it runs like a dream. We use VMware workstation a lot (hence the 8GB) and that works well. Except... now and then, after the PCs have been on for a few days, the whole system starts getting really sluggish doing certain tasks. The other's developer's system is far worse than mine with it taking up to a minute to launch IE. Today, mine has gone sluggish but nowhere near as bad. For example, normally when I click on a new tab in IE, it's instant. Today, there's an obvious delay. Right-clicking in this window to trigger iSpell is normally instant, right now it takes about five seconds. I've got resource monitor open on my second monitor and when I did that right-click, there was no obvious peak in CPU, disk or memory. A reboot does fix it so it does sound like a resource issue but haven't a clue what might be to blame. The two computers have similarities (same spec) but also differences (like motherboard, RAM & CPU models). So I guess the question is, any pointers on diagnosing why a PC is sluggish? What could cause such a right-click slow down in IE for example? It sounds like such a simple operation. NOTE: whilst typing this message alone, it was fine performance wise. I can click around the page no problem but right-click still is noticeable slow. Will reboot over lunch... Cheers, Rob.

    Read the article

  • mount.nfs: access denied by server while mounting (Kerberos authentication)

    - by Nick
    There's plenty of references to this error on Goggle, and even a question here with the same title, but it seems that "access denied by server while mounting" is a catch-all error. I've tried suggestions that others have used to fix this problem, but they did not work in my case. I'm trying to set-up a Kerberos-based NFS file server with shared homes for a Linux network. I'm using Ubuntu 11.04 Servers and clients. When trying to mount a share using: mount 192.168.1.115:/export/home/ /media/tmp I get: mount.nfs: access denied by server while mounting 192.168.1.115:/export/home/ This is the same if I mount it from a client machine or from the server itself. On the server, in /var/log/syslog I get: Aug 25 06:22:37 nfs mountd[1580]: authenticated mount request from 192.168.1.115:835 for /export/home (/export/home) Aug 25 06:22:37 nfs mountd[1580]: authenticated unmount request from 192.168.1.115:766 for /export/home (/export/home) Which is odd, since it says it's authenticated the request, not denying it. /etc/exports: /export *(rw,fsid=0,crossmnt,insecure,async,no_subtree_check,sec=krb5p:krb5i:krb5) /export/home *(rw,insecure,async,no_subtree_check,sec=krb5p:krb5i:krb5) On client: me@dt1:/$ rpcinfo -p 192.168.1.115 program vers proto port 100000 2 tcp 111 portmapper 100024 1 udp 37320 status 100024 1 tcp 48460 status 100003 2 tcp 2049 nfs 100003 3 tcp 2049 nfs 100003 4 tcp 2049 nfs 100227 2 tcp 2049 100227 3 tcp 2049 100003 2 udp 2049 nfs 100003 3 udp 2049 nfs 100003 4 udp 2049 nfs 100227 2 udp 2049 100227 3 udp 2049 100021 1 udp 58625 nlockmgr 100021 3 udp 58625 nlockmgr 100021 4 udp 58625 nlockmgr 100021 1 tcp 49616 nlockmgr 100021 3 tcp 49616 nlockmgr 100021 4 tcp 49616 nlockmgr 100005 1 udp 45627 mountd 100005 1 tcp 60265 mountd 100005 2 udp 45627 mountd 100005 2 tcp 60265 mountd 100005 3 udp 45627 mountd 100005 3 tcp 60265 mountd Any suggestions I could try?

    Read the article

  • Hard drive degredation from large memory usage and paging files?

    - by Stephen R
    I've had a question(s) regarding computer degradation going through my head for a while and haven't found many good resources for researching it. 1) First off, when is the virtual RAM/paging file on a hard drive used by Windows? Is it used when the RAM is full? Or does it use the Virtual RAM/paging file as intermediate caching between the RAM and actual hard drive space all the time? 2) If I were to run many applications on my computer at the same time and have a bad habit of doing this for the entire lifetime of the computer, does it use more of the virtual RAM/paging file than if I were to have fewer programs running? Just to note, the RAM never fills up on my computer but it is used heavily. 3) By extension of question 2, if the virtual RAM/paging file is used more heavily, would that result in rapid hard drive degradation? I have seen a pattern among all of the computers that I have owned or used in the past 5 years. I am the kind of person to leave my web browser up with 40 tabs among other programs which will eat up 40% of my memory typically. Over time my computer will slow down, browsers start crashing, programs start seizing up or crashing themselves, eventually the computer becomes essentially unusable. I have been trying to rack my mind to come up with a solution other than to purchase a new PC to have it die on me in the next couple years as well. This is the only thought that has come to mind that might have a simple hardware fix...Windows ReadyBoost...Maybe? I'd like to be able to discuss this so I can learn something about all of the above. Thanks.

    Read the article

  • nginx 301 redirect to subfolder on primary domain

    - by 187j3x1
    sorry for my poor english. i just set up wordpress on my vps, so far its the only item on my site. there for seo reason, i think is better redirect all primary domain to the blog folder. primary domain is example.com wordpress is at example.com/blog what i want is rewrite www.example.com and example.com to example.com/blog. googled got some scripts, and make some change paste into nginx config file. here is: #301 redirect www to non-www server { server_name www.example.com; location = / { rewrite ^/(.*) http://example.com/$1 permanent; } } #301 non-www to subfolder server { server_name example.com; location = / { rewrite ^/(.*) http://example.com/blog$1 permanent; } } it works at some degree, successfully redirect to example.com/blog. the only problem is i get 404 not found error. then i only make nginx redirect www to example.com/blog. ok, this time i can access blog page. i know there is something wrong in the non-www to subfolder script. but do not how to fix it :(

    Read the article

  • Window Server 2003 Print spooler

    - by mikenardone
    Hello Everyone in ServerFault, I am new to this website. I have been coming here to fix my own problems. I believe everyone here on this website is great. I could not find this issue anywhere. I am sure that other people had this issue. I have IBM X3850 48GB ram 2 TB of hard drives, four NIC cards. 2 Xeon 1.7 CPU. I am running VMware ESX. I believe that was the paid version if not then it is ESXI. I have 7 Servers on this server. All Window server 2003. On one of the Servers I keep on getting CPU is at 100% . So when I go into task manager and look at the processes that is going on, it is my print spooler. I have 30 different HP laserjet printers and two copiers from HP. I believe it is an driver issue, but I can't figure with one is doing this. Is there any programs for window server 2003 that finds bad print drivers.

    Read the article

  • BSOD error 0x0000006B PROCESS1_INITIALIZATION_FAILED on boot

    - by DontCare4Free
    I reinstalled League of Legends because the patcher always gave me an error. However, out of complete stupidness I didn't uninstall the old installation first because I thought that it would simply replace the files. However, when the installer bar got to 100% it simply minimized. Then I closed the application from the task manager. I tried uninstalling it after a failed attempt to start it up. The same behavior as when I installed it. Then I tried reinstalling where it simply presented the InstallShield Modify/Repair/Remove menu and I selected repair. Nothing happened. Then I tried selecting Modify, then seeing that the only option (called DefaultFeature) was unchecked. Same behaviour as install/uninstall. After seeing that it still failed, I uninstalled again. And after that I deleted C:\Program Files (x86)\League of Legends manually. When I tried installing LoL again it still thought I had it, so I chose repair. This time something actually happened, but it installed the whole game to C:\Windows. Seeing what was going on I clicked cancel and then started it up to try uninstalling it. However, I got an error message about something not being registered and then the minimization to I decided to let it repair completely. Then I uninstalled it and it gave only the minimization. However, when I rebooted another application started up complaining about some library being absent. So I decided to do a system restore. After letting it complete I got a BSOD every time I tried starting up Windows normally or in safe mode. However, system recovery mode works, although the system recovery automatic repair does not fix it. After a bit of searching I found a Microsoft KB article about it (981833) and tried following the workaround instructions. Nothing happened. I am using Windows 7 Home Premium 64-bit and Ubuntu 10.04 LTS 64-bit installed with WUBI.

    Read the article

  • Intell SSD + Win 7 after crash can not repair, can not re install

    - by Ori
    I have Lenovo w520, after i bought it i took away old hhd (no longer with me) and replaced it with intel ssd, it worked perfectly for 1 year or so, today my system fr0ze and after waiting for some time i didi hard reset - it wasn't able to boot anymore at all, i do not see any messages from windows ever, it only loads Intel boot utility that suggests to pick one of 3 devices to boot, it has my hdd there but nothing happens. /I dont have recovery tools from lenovo since i moved to another country, i got win 7 cd from a friend (came with his laptop) abd if in bios i have AHCI - it doesnt see my ssd, if compatible mode - it sees it but format not available, partition creation gives b\me 8007045 error. I tried diskpart, in compatible mode it sees my disk but doesnt do recover or clean all, also win 7 disk tools dont do anything if i try to do boot fix... I am ok with erasing it but i seem not to be able too, i jus tneed the machine to wpork asap, all my files are on external drives so i dont care about formatting. please help! I am given a very old machine by a friend so i am able to browse internet... it is under XP...

    Read the article

  • Developing high-performance and scalable zend framework website [on hold]

    - by Daniel
    We are going to develop an ads website like http://www.gumtree.com/ (it will not be like this one but just to give you an ideea) and we are having some issues regarding performance and scalability. We are planning on using Zend Framework for this project but this is all that I'm sure off at this point. I don't think a classic approch like Zend Framework (PHP) + MySQL + Memcache + jQuery (and I would throw Doctrine 2 in there to) will fix result in a high-performance application. I was thinking on making this a RESTful application (with Zend Framework) + NGINX (or maybe MongoDB) + Memcache (or eAccelerator -- I understand this will create problems with scalability on multiple servers) + jQuery or maybe throw Backbone.js in there, a CDN for static content, a server for images and a scalable server for the requests and the rest. My questions are: - What do you think about my approch? - What solutions would you recommand for developing an high performance, scalable application expected to have a lot of traffic using PHP(Zend Framework 2)...I would be interested in your approch. I should note that I'm a Zend developer, I'm working with Zend for over 3 years, this is why I'm choosing it.

    Read the article

  • Windows Server 2008 - RAID 5 Fails on Reboot

    - by Adam
    Hey, I've got an install of Windows Server 2008 Enterprise. It's running software RAID-5 with five disks. The disks were originally formatted under Windows Server 2003, but came up fine once I installed Windows Server 2008. The issue I'm having is that every time I reboot the server, the RAID comes up with a "Failed Redundancy" - the data stays available. I have 4 disks on a PCI SATA controller, and one of the disks connected to the motherboard's on-board SATA ports. (The other on-board port has the system disk connected.) I was having Disk #4 fail consistently, so I tried swapping the cables on the controller end. I swapped the on-board RAID disk with one on the PCI controller. Same issue now, expect with disk #1. Once the system's up, I can reactivate the RAID, it will resync for a while, then go to "Healthy", and will stay that way for an indefinite amount of time - until I reboot. As soon as I reboot, the disk drops again. I've ruled out disk + cable with the recabling. I don't believe it would be the controller as it seems to work fine most of the time - only failing on reboot, and the other port on the same controller connects the system disk - which is clearly working. I did look in the event log, but didn't see anything particularly relevant (although I didn't know what I was looking for - just looked for anything with a "Warning" or "Error" symbol that looked disk-related :)). I'm not particularly familiar with RAID on Windows, does anyone have any idea why this might be doing this? Any idea how to fix it? Any suggestions appreciated! -- Adam

    Read the article

  • Delayed internet access

    - by Joel Coel
    When I (and presumably my users) first start up or log in to my computer I can't get internet access until several minutes after logging in. Internet pages like serverfault.com will time out. During this time I can access internal web servers. Sometimes pinging the gateway seems to fix the problem. I'm using Windows 7 on this machine with wifi, and the problem seems limited to the wifi network, which is on a separate vlan. The wired network does not share the problem, but I know it's not the wifi connection itself because the internal sites work. The wifi access point is attached to a 3Com 4200 switch, with the port set for vlan 2 untagged, vlan 1 tagged. The 4200 has a fiber connection to a 3Com 4900SX fiber switch that acts almost as a router here. The fiber connection is vlan 1 untagged vlan 2 tagged at both ends. The gateway is then attached to a different 4200 (vlan 1 untagged, vlan 2 tagged) that has a similar fiber connection to the 4900SX. vlan 2 has 192.168.8.0/22 IPs, vlan 1 has 10.1.0.0/16 IPs. The 4900SX has an interface for both vlans (10.1.1.1/192.168.8.1), as does the gateway (10.1.1.5/192.168.8.5). There is one dchp server for both vlans on the same switch as the gateway. It chooses a dhcp scope based on the interface used by the 4900sx to forward the dhcp request. There is also a network access list on the 4900sx set to deny all vlan2 traffic to any 10.1.x.x host, with exceptions made for a few servers, including dhcp, 4900sx, and the gateway. I think that about covers it. Any ideas on why internet access would be delayed like this?

    Read the article

  • win 7 something is causing excessive disk usage, maybe chrome?

    - by camcam
    On my Win 7 computer, this happens: I work for several hours without problems, also using Chrome Suddenly, just after refreshing a page in Chrome, disk starts being used excessively (here I can close Chrome or not, no matter, the disk won't stop) Disk diod is on all the time and I hear it running like crazy, all computer is a little slowed down It last 5-10 minutes In the meantime, I go to Windows Task Manager and observe what processes are using disk and turn them off one by one - but no success in stopping the excessive disk usage After approximately 10 minutes everything stops I go to Chrome (or re-open it) and refresh the page with mixed results - sometimes the whole process repeats immediately, sometimes not Basically, it is almost always Chrome refreshing random page that starts the excessive disk usage, but killing Chrome process does not stop the disk. Going to the same page in Firefox is not causing problems. Windows Search is turned off. I would like to know what is really happening. Perhaps there is a utility which would allow me to see which process is really using the disk, so that I can disable the service ? (not chrome, because killing chrome does not change anything) or even better, perhaps there is a way to fix it?

    Read the article

  • iTunes Title Bar is Equal to the Location of the Library file?

    - by Urda
    I have never been able to get a clear answer on why the latest edition of iTunes does this. I have my entire iTunes library located in C:\itunes\ and the library data files inside C:\itunes\!library_info for backup purposes. However when version 9 of iTunes came out it went from having iTunes as the title, to !library_info. Anyway to get around this without moving my data files away? Annoying "feature" if that is what it is. Again Apple support and forums were of no help to me. Anyone have insight on this? System Info: Windows Vista x86 Ultimate, latest updates. iTunes Version 9.0.3.15 Screenshot: http://farm5.static.flickr.com/4072/4414557544_d0b25eb64c_o.jpg Flickr Page: http://www.flickr.com/photos/urda/4414557544/ UPDATE: I put a bounty on this, and would be open to hacking the registry or doing a custom config. Please help me fix my title bar!!! Update2: I would not like to move my library files out of itunes\!library_info to avoid them inter-mingling with my music library.

    Read the article

  • MAMP Pro virtual hosts on Mountain Lion not being recognized

    - by user135242
    I'm running MAMP PRO 2.1.1 on OSX 10.8.1 and not having any luck getting Apache to recognize any hosts that have been set up in MAMP besides localhost. This only happens when trying to use port 80. When I switch to port 8888 everything runs fine. Mountain Lion's Apache has been disabled and I get no errors or warnings when starting MAMP and the servers. Any doc root I set for "localhost" runs without problem. Any other server name I define, however, results in "cannot connect" when viewing in Chrome (not to be confused with "cannot find" - the browser is in fact following /etc/hosts to 127.0.0.1, but MAMP's Apache is simply not responding) I was wondering if anyone else has run into this issue or knows how to solve it. I'm working on some WordPress development and it keeps wanting to redirect to the base URL (with no port reference) even during setup. I'm sure I could fix things from the WP side but I'd rather figure out what the root issue is with MAMP. Thanks in advance for any insight you can provide.

    Read the article

  • Unable to load Windows after using EasyBCD to Reset bcd [duplicate]

    - by johnny
    This question already has an answer here: How can I repair the Windows 8 EFI Bootloader? 9 answers My windows installation was working perfectly fine until i clicked "Reset BCD" in EasyBCD in Windows 8. After clicking that EasyBCD told me to add Win 8 entry via Add Entry Menu so i did. After restart, win 8 would not start. Neither would recovery F11. Attempts i made to Restore : Ran boot-repair from ubuntu live cd several time. Used Win8 system recovery disc created via virtualbox with win 8 preview iso. Automated repair from Win8 system recovery disc Ran following commands from cmd started from Win8 system recovery disc bootrec /fixmbr Result : Success message bootrec /rebuildbcd Result : after hitting (Y) "The requested system device cannot be found" System refresh started from Win8 system recovery disc gives error that device is locked. System reset started from Win8 system recovery disc gives error that required partition or device is missing or not accessible. Used automated repair from EasyRE disc. It gave success message. Used Fix boot problem from Macrium reflect winPE repair disc. Copied Recovery partition to usb. Booting from usb gave this error Your PC needs to be repaired. Error Code : 0XC000000f Press Enter to try again Press F8 for Startup Settings F8 & Enter does nothing I cannot install WIn7 or Win 8, error it gives : "windows cannot be installed on this disk. The selected disk is of the GPT partition style."

    Read the article

  • Ubuntu Natty 11.04, Turning the wireless switch off; switches it off permanently!

    - by ZiGi
    i'm using an hp pavilion dv2000 i turned the wifi switch off by mistake, the LED turned orange and the wifi got disconnected. and now when i turn the switch on, it remains orange and the wifi still isn't functional. this happened before; i found a fix that worked searching google. it was done via terminal commands and i didn't have to download anything but i can't find the solution anymore! wlan0 shows up when i use: :~$iwconfig #BLA BLA BLA #... wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off more results: :~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill :~$ rfkill list all 1: phy0: WirelessLAN Soft blocked: yes Hard blocked: yes :~$ sudo rfkill unblock all :~$ rfkill list all 1: phy0: WirelessLAN Soft blocked: no Hard blocked: yes :~$ sudo ifconfig wlan0 up SIOCSIFFLAGS: Operation not possible due to RF-kill it's still hard blocked! even though the switch is turned on; gives the same result eitherways a direction to a page with a working solution is a much appreciated answer!

    Read the article

  • Windows 7 hangs on black screen for a while after log in

    - by steini
    I get the welcome screen. I click on my user and get the "logging on" screen. After that all I get is a black screen with a mouse cursor. I can't even start task manager. No ctrl+alt+del or ctrl+shift+escape. It stays like this for about 10 minutes, then the desktop finally starts loading. According to the hdd led on my case, windows isn't even trying to access the hard drive for that whole time. It's just hanging doing nothing it seems. What I have tried: Uninstalled video driver and removed leftovers with driver sweeper Disabled all startup programs and non microsoft services Loaded "last known good configuration" Ran the alleged "black screen fix" from prevx against my best judgement (don't really like running random exes without knowing what they do at all) None of that works. I can boot into safe mode normally. My specs: i7 920 Gigabyte X58-UD3R Gigabyte HD5870 1GB 12GB Mushkin Silverline 1333MHz Windows 7 Ultimate x64 I'm also having another problem which I suspect is related. After I have gotten the computer up and running, everything works perfectly, but when it's been on for a while it starts behaving strangely when changing display modes. When I start up a game or anything that changes the screen resolution the computer freezes for about a minute every time until I reboot again. I think this is probably related to the black screen problem. Just thought I'd check to see if anyone has had the same problem. Let me know if I should post any more details about my system to help diagnose this. Thanks in advance.

    Read the article

  • How do I set up dual monitors on Kubuntu 10.04 using the latest nVidia drivers with a 9800M video ca

    - by NoCatharsis
    I'm a Linux newb so please try to keep the lingo low-key. I installed the latest nVidia drivers on my laptop using the 9800M card. The laptop is a Gateway P-7805u and I'm connected to the second monitor using VGA. Also, before installing the nVidia drivers (and just using the basic drivers included with Kubuntu 10.04), basic dual monitor support worked, except I could not enable compositing features for some reason. So I thought the proprietary drivers would fix this. Several issues have arisen since installation: 1) I've clicked through all of the display settings to activate the second screen with absolutely no change. 2) When I try to apply settings and Save Configuration as the nVidia help suggests, I am told that I cannot save to the X.conf file. I assume this is due to innate permissions on my user settings, which I have no idea how to properly configure. 3) I have no idea where to go from here, as most of the fixes I found online involve Linux syntax and verbiage, to which I'm totally clueless after spending over half my life with Windows.

    Read the article

  • NginX & Munin - Location and error 404

    - by user1684189
    I've a server that running nginx+php-fpm with this simple configuration: server { listen 80; server_name ipoftheserver; access_log /var/www/default/logs/access.log; error_log /var/www/default/logs/error.log; location / { root /var/www/default/public_html; index index.html index.htm index.php; } location ^~ /munin/ { root /var/cache/munin/www/; index index.html index.htm index.php; } location ~\.php$ { include /etc/nginx/fastcgi_params; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /var/www/default/public_html$fastcgi_script_name; } } but when I open ipoftheserver/munin/ I recieve a 404 error (when I request ipoftheserver/ the files on /var/www/default/public_html are listened correctly) Munin is installed and works perfectly. If I remove this configuration and I use this another one all works good (but not in the /munin/ directory): server { server_name ipoftheserver; root /var/cache/munin/www/; location / { index index.html; access_log off; } } How to fix? Many thanks for your help

    Read the article

  • Building vs buying a server for an academic lab [closed]

    - by Roy
    I'm looking for advice on the classic build vs buy question. We need a new linux server to run Matlab computation on in our lab (academic). Matlab parallel computing toolbox licence allows up to 12 local workers so we are aiming at a 12 core server with 4GB memory per core (total of 48gb). The system will have an SSD for the OS and a raid-5 (4x2tb) for data. I looked around and found a (relatively) cheap vendor, Silicon Mechanics, that offers a system to our liking (specs below) for $6732. However, buying the components from newegg cost only $4464! The difference is $2268 which is 50% of the base cost. If buying from a company can be thought of as a sort of insurance, basically my premiums are of 50% of the base cost which to me sounds like a lot. Of course any downtime is bad, but the work is not "mission critical", i.e. if it takes a few days to fix it when it breaks its no the end of the world. If it takes weeks to months then its a problem. If it breaks 2-3 times in 3 years, not too bad. If it breaks every month not good. In term of build experience, I set up a linux cluster in grad school (from existing computers) and I build my home pcs but I never built a server before. The server components I'm thinking about: 1 x SUPERMICRO SYS-7046T-6F 4U Tower Server Barebone Dual LGA 1366 Intel 5520 DDR3 1333/1066/800 ($1,050) 12 x Kingston 4GB 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) ECC Unbuffered Server Memory ($420) 2 x Intel Xeon E5645 Westmere-EP 2.4GHz LGA 1366 80W Six-Core ($1,116) 4 x Seagate Constellation ES 2TB 7200 RPM SATA 6.0Gb/s 3.5" ($1,040) 1 x SAMSUNG Internal DVD Writer Black SATA ($20) 1 x Intel 520 Series 2.5" 180GB SATA III MLC SSD $300 1 x LSI LSI00281 PCI-Express 2.0 x8 MD2 Low profile SATA / SAS MegaRAID SAS 9260CV-4i Controller Card, $695

    Read the article

  • High memory utilization with firebird + windows server 2008 r2

    - by chesterman
    i have a Windows Server 2008 R2 (64bit) running a 64bit installation of Firebird 2.1.4.18393_0 in a 4GB phisical server. After a while, the task manager show that all memory is used, but the sum of the memory of all process does not stack to the half of the memory. Unfortunally, it's start swapping. Using RAMMAP, i can see that my entire database file is mapped into the memory. This only occours in windows server 2008 r2 and windows 7 64 bit. i can use firebird 32 or 64bit installations, doesn't matter. How can i prevent this? Why this only occours in w2k8r2 and w7? tks in advance ** UPDATE Aparently, this occours by the use of all memory by the file system cache. The microsoft documentations explain that this WAS a issue in windows xp, 2k3, vista and 2k8, but it was solved in 7 and 2k8r2. also adds that this issue is more common in 64bit hosts. (http://support.microsoft.com/kb/976618) there are some tools (DynCache, setcache and the Get/SetSystemFileCacheSize system calls from windows API) that allows me to fix a upper limit to the memory usage by the fscache, but the documentation argues that i should not do this in w2k8r2 because it will severely impact on the overall system performance. anyway, i tried, the performance remained the same shit and the use of the page file remained, although there is now more the 1gb of free memory.

    Read the article

  • Apache config: Permissions, Directories and Locations

    - by James Murphy
    I'm trying to get my head around apache configuration to fix a problem I'm having but after a few hours I've decided to ask here. This is what I've got at the moment: DocumentRoot "/var/www/html" <Directory /> Options None AllowOverride None Deny from all </Directory> <Directory /var/svn> Options FollowSymLinks AllowOverride None Allow from all </Directory> <Directory /opt/hg> Options FollowSymLinks AllowOverride None Allow from all </Directory> <Location /hg> AuthType Digest AuthName "Engage HG" AuthDigestProvider file AuthUserFile /opt/hg/hgweb.users Require valid-user </Location> WSGISocketPrefix /var/run/wsgi WSGIDaemonProcess hg processes=3 threads=15 WSGIProcessGroup hg WSGIScriptAlias /hg "/opt/hg/hgweb.wsgi" <Location /svn> DAV svn SVNPath /var/svn/repos AuthType Basic AuthName "Subversion" AuthUserFile /etc/httpd/conf/users require valid-user </Location> I'm trying to get my head around how it's all laid out and how directories relate to locations/etc For /hg I get asked for a password but to /svn I get a 403 forbidden... the error I get is: [client 10.80.10.169] client denied by server configuration: /var/www/html/svn When I remove the entry it works fine.. I can't figure out how to get it linking to the /var/svn directory

    Read the article

  • Nvidia GTX 660m crashes games

    - by dcap
    I just recently bought a Lenovo y580 with both HD intel graphics and an Nvidia GTX 660m. It works great except for one thing: playing games. Every time I load a game, either with Steam or Games for Windows Live, games will end up crashing. I've already talked with lenovo tech support and they couldn't help other than send my new laptop for repair which would take 7 days. So before I do that I thought I'd ask around. These are the games I've tested and what happens when they load: Civilization V: Game loads fine but once it gets loaded to the game, there's noticeable "tearing" popping up and certain things flash. Within a minute of this, the game crashes. Does the same thing regardless if Vsync is on or off. Total War Shogun2: Game gets to the menu screen. The background of the menu screen shows what is expected - slideshow of in-game environments rendered on high settings (this is expected). However, within 2 seconds of the menu loading up it crashes. Age of Empires 3 (Non-steam): This game is several years old so it should work on this brand new laptop fine. However the results are similar to that of Civilization V. Noticeable "Tearing" and after a few seconds it'll freeze/crash. I've done tests on all these games with both the latest stable Nvidia driver 285 as well as the nightly build 307. In addition, Nvidia control panel is set on using the dedicated graphics card for all programs. So is there anything I can do to fix this or will I have to send it back for a week to tech support?

    Read the article

  • Windows 8.1 Upgrade: I have to run everything as administrator now?

    - by Robert Dailey
    I was running Windows 8 x64 Professional before and I never had to run programs as administrator to get them to function fully. Examples: Chrome OpenVPN GUI I always have my user under the local "Administrators" group and also disable UAC by putting the slider for it at the very bottom. This always did the trick. After the Windows 8.1 upgrade, I run into a few issues: Running Chrome normally, the Chrome icon doesn't appear in the taskbar. Chrome won't run in the background. OpenVPN GUI has errors when launching. Running both as administrator (Right Click Run as Administrator) fixes those issues and they run perfectly. What has changed in Windows 8.1 upgrade to cause these "problems"? I'm an advanced user, I don't want to have to worry about administrative rights. Any advice on how to fix these problems? EDIT I also get prompted for administrator permission to delete directories under "Program Files" now... that never used to happen before. I can hit Continue and it will allow me to delete, but just another symptom of the problem...

    Read the article

  • How can visiting a webpage infect your computer?

    - by Cybis
    My mother's computer recently became infected with some sort of rootkit. It began when she received an email from a close friend asking her to check out some sort of webpage. I never saw it, but my mother said it was just a blog of some sort, nothing interesting. A few days later, my mother signed in on the PayPal homepage. PayPal gave some sort of security notice which stated that to prevent fraud, they needed some additional personal information. Among some of the more normal information (name, address, etc.), they asked for her SSN and bank PIN! She refused to submit that information and complained to PayPal that they shouldn't ask for it. PayPal said they would never ask for such information and that it wasn't their webpage. There was no such "security notice" when she logged in from a different computer, only from hers. It wasn't a phishing attempt or redirection of some sort, IE clearly showed an SSL connection to https://www.paypal.com/ She remembered that strange email and asked her friend about it - the friend never sent it! Obviously, something on her computer was intercepting the PayPal homepage and that email was the only other strange thing to happen recently. She entrusted me to fix everything. I nuked the computer from orbit since it was the only way to be sure (i.e., reformatted her hard drive and did a clean install). That seemed to work fine. But that got me wondering... my mother didn't download and run anything. There were no weird ActiveX controls running (she's not computer illiterate and knows not to install them), and she only uses webmail (i.e., no Outlook vulnerability). When I think webpages, I think content presentation - JavaScript, HTML, and maybe some Flash. How could that possibly install and execute arbitrary software on your computer? It seems kinda weird/stupid that such vulnerabilities exist.

    Read the article

  • sharepoint crawl not indexing main site

    - by user22215
    Guys I'm having some strange search issues' going on with my main portal application. First off let me give you a little back ground on the problem web app. Our Sharepoint environment was originally set up by a consultant that did not follow best practices. She used one web app to house our companies' intranet site, ssp, and mysites. Since than I have provisioned a new ssp that I have segmented correctly I moved all of our other sites over to the new ssp with out any problems . However, I could not assign the main portal app to the new ssp since the portal app housed the ssp site collection. So I deleted the ssp site collection after that I deleted the ssp and assigned the portal app to my new ssp. Now this is where the problem starts when I attempt to crawl this application the crawl starts than stops 5 seconds later with a status of success also it reports that 1 item was successfully crawled. The funny thing is the main portal app has nearly 30000 items. I have tracked the problem down to the web app if I create a test web app than restore the content I have no problem crawling all 30000 items. Also all of my other web apps that use the same ssp have no problem completing crawls. I don't see anything in the ULS logs or server 2003's event viewer. Also I'm using a separate dedicated index server that's configured to crawl itself via host file configuration. I would like to fix this problem with out having to recreate our main portal site due to the fact that we have several custom code modifications where DLL's were registered to the IIS bin folder also I don't even want to get into the Silverlight mods that were done. Any help with this problem is much appreciated Same problem as minehttp://www.experts-exchange.com/OS/Microsoft_Operating_Systems/Server/MS-SharePoint/Q_23885820.html

    Read the article

< Previous Page | 433 434 435 436 437 438 439 440 441 442 443 444  | Next Page >