Search Results

Search found 23271 results on 931 pages for 'static classes'.

Page 437/931 | < Previous Page | 433 434 435 436 437 438 439 440 441 442 443 444  | Next Page >

• Cisco ASA: How to route PPPoE-assigned subnet?

  - by Martijn Heemels

  We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

  Read the article

• Attempting to migrate to Aptana from Dreamweaver - how to?

  - by Kerry

  I have been using Dreamweaver for years, and have used Dreamweaver MX, Dreamweaver MX 2004, Dreamweaver 8 & Dreamweaver CS4. They all carry a common theme and were relatively easy to migrate to each other. I use, however, very few features of dreamweaver. Specifically: Syntax highlighting Telesense FTP management/site management The search/replace The idea I get from Aptana is its much more geared toward the web development/programmer side of things, have better visualizations of classes, etc., and handle everything else just as well. The problem is it is not at all clear to me. I managed to start a new project, but it didn't associate it with an FTP. So, I created an FTP, and it looks like I can have many FTPs for one project. My question then is, is there a tutorial or guide to migrating to Aptana from a Dreamweavor's perspective?

  Read the article

• Registry in Windows7 - appears in powershell, but not regedit

  - by Dan

  Hi. My software is writing to the registry (HKCU:\software\classes\clsid\). The key that I'm writing isn't appearing when I go to that location in regedit. However, if I navigate to that location in powershell, then I see ONLY the entry I added, and not the other class ids that I see in regedit. It's almost as if there's two versions of the registry. I'm using Windows7 (moved recently from XP, so there's probably some weird virtualization stuff going on which I've not learnt yet! ;-)). Thanks for any help with this, Dan.

  Read the article

• Internet (Flash) video without a PC

  - by Rob Allen

  I am looking to retire my HTPC. So much of what we do with it can be done with one of our video game consoles or an AppleTV that is seems like a waste of space, power and time to maintain. The trouble is that my wife does streaming yoga classes served up via specific websites. I am assuming they are Flash based and so far I have been unable to find Apps for these content providers. My question is, is there a GOOD way to handle flash-based or even HTML5/h.264 web content with one of the other Internet enabled devices in our stack? So far we have: Nintendo Wii Playstation 3 XBox 360 And we're looking to purchase a current generation AppleTV. update The sites are YogisAnonymmous.com and YogaJournal.com, both are confirmed as Flash.

  Read the article

• ServerRoot in my lighttpd.conf

  - by michael

  Hi, I have use the following example lighttpd.conf to launch my lighttpd. Can you please tell me where is my 'ServerRoot'? # lighttpd configuration file # # use it as a base for lighttpd 1.0.0 and above # # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $ ############ Options you really have to take care of #################### ## modules to load # at least mod_access and mod_accesslog should be loaded # all other module should only be loaded if really neccesary # - saves some time # - saves memory server.modules = ( # "mod_rewrite", # "mod_redirect", # "mod_alias", "mod_access", # "mod_trigger_b4_dl", # "mod_auth", # "mod_status", # "mod_setenv", "mod_fastcgi", # "mod_proxy", # "mod_simple_vhost", # "mod_evhost", # "mod_userdir", # "mod_cgi", # "mod_compress", # "mod_ssi", # "mod_usertrack", # "mod_expire", # "mod_secdownload", # "mod_rrdtool", "mod_accesslog" ) ## A static document-root. For virtual hosting take a look at the ## mod_simple_vhost module. server.document-root = "/srv/www/htdocs/" ## where to send error-messages to server.errorlog = "/var/log/lighttpd/error.log" # files to check for if .../ is requested index-file.names = ( "index.php", "index.html", "index.htm", "default.htm" ) ## set the event-handler (read the performance section in the manual) # server.event-handler = "freebsd-kqueue" # needed on OS X # mimetype mapping mimetype.assign = ( ".pdf" => "application/pdf", ".sig" => "application/pgp-signature", ".spl" => "application/futuresplash", ".class" => "application/octet-stream", ".ps" => "application/postscript", ".torrent" => "application/x-bittorrent", ".dvi" => "application/x-dvi", ".gz" => "application/x-gzip", ".pac" => "application/x-ns-proxy-autoconfig", ".swf" => "application/x-shockwave-flash", ".tar.gz" => "application/x-tgz", ".tgz" => "application/x-tgz", ".tar" => "application/x-tar", ".zip" => "application/zip", ".mp3" => "audio/mpeg", ".m3u" => "audio/x-mpegurl", ".wma" => "audio/x-ms-wma", ".wax" => "audio/x-ms-wax", ".ogg" => "application/ogg", ".wav" => "audio/x-wav", ".gif" => "image/gif", ".jar" => "application/x-java-archive", ".jpg" => "image/jpeg", ".jpeg" => "image/jpeg", ".png" => "image/png", ".xbm" => "image/x-xbitmap", ".xpm" => "image/x-xpixmap", ".xwd" => "image/x-xwindowdump", ".css" => "text/css", ".html" => "text/html", ".htm" => "text/html", ".js" => "text/javascript", ".asc" => "text/plain", ".c" => "text/plain", ".cpp" => "text/plain", ".log" => "text/plain", ".conf" => "text/plain", ".text" => "text/plain", ".txt" => "text/plain", ".dtd" => "text/xml", ".xml" => "text/xml", ".mpeg" => "video/mpeg", ".mpg" => "video/mpeg", ".mov" => "video/quicktime", ".qt" => "video/quicktime", ".avi" => "video/x-msvideo", ".asf" => "video/x-ms-asf", ".asx" => "video/x-ms-asf", ".wmv" => "video/x-ms-wmv", ".bz2" => "application/x-bzip", ".tbz" => "application/x-bzip-compressed-tar", ".tar.bz2" => "application/x-bzip-compressed-tar", # default mime type "" => "application/octet-stream", ) # Use the "Content-Type" extended attribute to obtain mime type if possible #mimetype.use-xattr = "enable" ## send a different Server: header ## be nice and keep it at lighttpd # server.tag = "lighttpd" #### accesslog module accesslog.filename = "/var/log/lighttpd/access.log" ## deny access the file-extensions # # ~ is for backupfiles from vi, emacs, joe, ... # .inc is often used for code includes which should in general not be part # of the document-root url.access-deny = ( "~", ".inc" ) $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## # which extensions should not be handle via static-file transfer # # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" ) ######### Options that are good to be but not neccesary to be changed ####### ## bind to port (default: 80) server.port = 9090 ## bind to localhost (default: all interfaces) server.bind = "127.0.0.1" ## error-handler for status 404 #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## to help the rc.scripts #server.pid-file = "/var/run/lighttpd.pid" ###### virtual hosts ## ## If you want name-based virtual hosting add the next three settings and load ## mod_simple_vhost ## ## document-root = ## virtual-server-root + virtual-server-default-host + virtual-server-docroot ## or ## virtual-server-root + http-host + virtual-server-docroot ## #simple-vhost.server-root = "/srv/www/vhosts/" #simple-vhost.default-host = "www.example.org" #simple-vhost.document-root = "/htdocs/" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-" #server.errorfile-prefix = "/srv/www/errors/status-" ## virtual directory listings #dir-listing.activate = "enable" ## select encoding for directory listings #dir-listing.encoding = "utf-8" ## enable debugging #debug.log-request-header = "enable" #debug.log-response-header = "enable" #debug.log-request-handling = "enable" #debug.log-file-not-found = "enable" ### only root can use these options # # chroot() to directory (default: no chroot() ) #server.chroot = "/" ## change uid to <uid> (default: don't care) #server.username = "wwwrun" ## change uid to <uid> (default: don't care) #server.groupname = "wwwrun" #### compress module #compress.cache-dir = "/var/cache/lighttpd/compress/" #compress.filetype = ("text/plain", "text/html") #### proxy module ## read proxy.txt for more info #proxy.server = ( ".php" => # ( "localhost" => # ( # "host" => "192.168.0.101", # "port" => 80 # ) # ) # ) #### fastcgi module fastcgi.server = ( "/fastcgi_scripts/" => (( "host" => "127.0.0.1", "port" => 1026, "check-local" => "disable", "bin-path" => "/usr/local/bin/cgi-fcgi", #"docroot" => "/" # remote server may use # it's own docroot )) ) ## read fastcgi.txt for more info ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini #fastcgi.server = ( ".php" => # ( "localhost" => # ( # "socket" => "/var/run/lighttpd/php-fastcgi.socket", # "bin-path" => "/usr/local/bin/php-cgi" # ) # ) # ) #### CGI module #cgi.assign = ( ".pl" => "/usr/bin/perl", # ".cgi" => "/usr/bin/perl" ) # #### SSL engine #ssl.engine = "enable" #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" #### status module #status.status-url = "/server-status" #status.config-url = "/server-config" #### auth module ## read authentication.txt for more info #auth.backend = "plain" #auth.backend.plain.userfile = "lighttpd.user" #auth.backend.plain.groupfile = "lighttpd.group" #auth.backend.ldap.hostname = "localhost" #auth.backend.ldap.base-dn = "dc=my-domain,dc=com" #auth.backend.ldap.filter = "(uid=$)" #auth.require = ( "/server-status" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "user=jan" # ), # "/server-config" => # ( # "method" => "digest", # "realm" => "download archiv", # "require" => "valid-user" # ) # ) #### url handling modules (rewrite, redirect, access) #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" ) #### both rewrite/redirect support back reference to regex conditional using %n #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} # # define a pattern for the host url finding # %% => % sign # %0 => domain name + tld # %1 => tld # %2 => domain name without tld # %3 => subdomain 1 name # %4 => subdomain 2 name # #evhost.path-pattern = "/srv/www/vhosts/%3/htdocs/" #### expire module #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes") #### ssi #ssi.extension = ( ".shtml" ) #### rrdtool #rrdtool.binary = "/usr/bin/rrdtool" #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd" #### setenv #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" ) #setenv.add-response-header = ( "X-Secret-Message" => "42" ) ## for mod_trigger_b4_dl # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db" # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" ) # trigger-before-download.trigger-url = "^/trigger/" # trigger-before-download.download-url = "^/download/" # trigger-before-download.deny-url = "http://127.0.0.1/index.html" # trigger-before-download.trigger-timeout = 10 #### variable usage: ## variable name without "." is auto prefixed by "var." and becomes "var.bar" #bar = 1 #var.mystring = "foo" ## integer add #bar += 1 ## string concat, with integer cast as string, result: "www.foo1.com" #server.name = "www." + mystring + var.bar + ".com" ## array merge #index-file.names = (foo + ".php") + index-file.names #index-file.names += (foo + ".php") #### include #include /etc/lighttpd/lighttpd-inc.conf ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf" #include "lighttpd-inc.conf" #### include_shell #include_shell "echo var.a=1" ## the above is same as: #var.a=1 Thank you.

  Read the article

• How small is too small (of laptop for a programmer)

  - by defn

  Im thinking of replacing my HP Pavilion dv5-1004nr with Acer Aspire AS5738-6444, I'm a CS student... so im torn between screen size (liking the 15in and decent gpu.. but it weight nearly 8 pounds and battery can barely last 2 hours in power saver mode) and wanting something portable to carry to classes/take notes ect (3 pounds and up to 8 hour battery life of the acer) what would you guys suggest? acer any good? i love my hp keyboard.. (or have links to other good laptops, im aiming for 600$ range?)

  Read the article

• How does java permgen relate to code size

  - by brad

  I've been reading a lot about java memory management, garbage collecting et al and I'm trying to find the best settings for my limited memory (1.7g on a small ec2 instance) I'm wondering if there is a direct correlation between my code size and the permgen setting. According to sun: The permanent generation is special because it holds data needed by the virtual machine to describe objects that do not have an equivalence at the Java language level. For example objects describing classes and methods are stored in the permanent generation. To me this means that it's literally storing my class def'ns etc... Does this mean there is a direct correlation between my compiled code size and the permgen I should be setting? My whole app is about 40mb and i noticed we're using 256mb permgen. I'm thinking maybe we're using memory that could be better allocated to dynamic code like object instances etc...

  Read the article

• Where do I learn about IP blocks and subnets? Or is there just a calculator that does it all for me?

  - by cwd

  Amazon's elastic compute tool (among others) requires the ip block format for their command: ec2-authorize websrv -P tcp -p 80 -s 205.192.0.0/16 I may be doing this wrong, but as far as I can tell I need to use the block format even for a single IP address. 1) So, how would I do that for this IP? 71.75.232.132 Several years ago I took a CCNA class, and I remember going over IPs and subnets, masks, broadcast addresses, class a/b/c networks, etc. However a lot seems to have changed since then - for example I don't think you can tell what "class" a network is in just by looking at it anymore - sometimes they could be multiple classes. 2) Anyhow, my second question is where do I go to get a refresher on all these things? 3) Or should I just be using ipcalc or an online calculator to do it all for me - and if so, which one?

  Read the article

• Independent SharePoint Trainer in DC ~ I conduct, teacher-led SHAREPOINT user training anywhere ~

  - by technical-trainer-pro

  Your options: "*interactive" hands-on VIRTUAL or CLASSROOM style training to all SharePoint Users & Site Admin owners.* I also develop customized classes tailored to the specific design of any SharePoint Site - acting as the translator for those left to understand and use it, on an everyday basis. Audience: users,clients,stakeholders,trainers Areas: functionality,operations,management, user site customization,ITIL training, governance process,change mangement and industry or client specific scenerios. INDIVIDUAL RATE- $300 to join any class *(1)* GROUP RATE - $1500 for a private group of (6-10) Flexible Scheduling contact me : [email protected] Local to DC/MD/VA ---can train hands-on anywhere~

  Read the article

• How to build a small network/server at home, basics

  - by Moe

  I'm one class away from my BA IT, I took several classes in general IT. Out of all the books I found just two to be really beneficial. I'm trying to get the hands on experience so my question is.... I want to build a small network in my home, wireless and also wired; printer, laptop, desktop, server (I have 4 1TB external drives of movies/music I want to be available to all computers) Where would I start from building a server with my hard drives, good modem, router, switch port, firewall internet speed/connection etc. This is my first project I want to try.

  Read the article

• How to clear the list of "Notification Area Icons" in Windows 7?

  - by cliff.meyers

  I can't seem to find a way to clear the list of "Notification Area Icons" in Windows 7. Unfortunately I had installed a download manager (GetRight) which by default creates a tray icon for each download. I quickly disabled this but still have a ton of entries in that menu and it's annoying. I found an article that had me navigate to this key in the registry... HKEY_CURRENT_USER\Software\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\TrayNotify delete IconStreams and PastIconStreams, then restart, but it did not clear the list. Any ideas on this one?

  Read the article

• creating TAGS for Ruby and emacs

  - by hortitude

  I ran the following from my top level Ruby on Rails directory find . -name "*.rb" | etags - Then within emacs I visited that tag file. This works reasonably well to find some of the methods and most of the files, however it is having trouble finding some of the extra methods/classes that I use in my helpers directory. e.g. I have a file in my helpers dir called my_foo_helper.rb If I search my tags for that file, it finds it. However, if I try to find a tag for one of the methods within that module it doesn't find it at all. If I use Aptana or something like that it seems to be able to locate those methods. Any thoughts? Thanks!

  Read the article

• Open-source training class/room/instructor resource management software?

  - by Kyle Eli

  We're looking to replace an internal system used for managing training classes with something a bit more robust. Needs to be open-source or have a license level that grants access to source, and needs to be ASP.net (C# preferred, but could live with VB.net) Ultimately, we'll need to be able to assign facilities and instructors, manage attendees, send notifications, and build calendar views. We'll also be integrating with our website to allow on-line sign-up and other things for attendees to manage on their own. We do expect to implement quite a bit of it in-house, but we'd like as broad of a base to start from as we can get. Still, just a really good web-based meeting-room reservation system might make a good enough starting point. In list form: Meeting/training resource management softwareASP.net (C# or VB.net)Source availableWe're expecting to have to modify the software to meet all of our requirements

  Read the article

• As a student looking for hands-on experience, how should I configure my test lab to accurately reflect a business setting?

  - by Moe

  I'm one class away from my BA IT, I took several classes in general IT. Out of all the books I found just two to be really beneficial, so I'm trying to get the hands on experience. I want to build a small test network that has both wireless and also wired clients, a printer, a laptop, a desktop, and server (I have 2x 1TB drives of data that I want to be available to all computers). What should I do to configure these in a way that will reflect how a small business might be set up, so that I can work towards some meaningful experience.

  Read the article

• How can you tell a USB cable version?

  - by Keltari

  Here is a question a student asked me in one of my A+ certification classes: How can you tell a USB cable version? I honestly dont know the answer, I cant find one either. USB cables are rated for versions 1, 1.1, 2, and now 3. I have seen their versions on the packaging, but never marked on the cable itself. Since the respective versions are manufactured differently, there is a difference between them. So, how can you tell? On Wikipedia: USB cables v.2 and earlier do use a "twisted pair" method, but doesnt specify if the cables themselves are the same or different. Is the cable rating system for v.2 and earlier just marketing hype?

  Read the article

• Unable to PPTP through NAT on Cisco 881

  - by MasterRoot24

  I'm trying to connect to a PPTP server which is sat behind a Cisco 881 NAT router. The server is running Ubuntu Server 12.04 and is running Poptop pptpd as the PPTP daemon listening for connections. As discussed in my other question, I'm trying to setup a Cisco 881 router to replace my old Linksys WAG320N. This same server and WAN connection worked fine with the WAG320N with no special configuration, other than allowing 1723 in through the firewall. On the Cisco 881, I'm using the newer ip nat enable or NAT NVI to setup static routes in through the firewall for the services running behind the router. My reason being that I can't run another copy of my live DNS domains internally with local IP addresses in. For the purposes of this question, though, I have rebuilt the router with ip nat inside/outside style NAT'ing, but this issue is still apparent. HTTP/SMTP/IMAP etc. all work ok from both the WAN and LAN interfaces of the router. I'm only having issues with SIP (see other question) and PPTP. My issue is that the GRE doesn't appear to be passing through NAT correctly and one end of the connection is not receiving GRE traffic when it should be, so the server hangs up the connection. Here's an example of /var/log/syslog with debug enabled in /etc/pptpd.conf: Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: MGR: Launching /usr/sbin/pptpctrl to handle client Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: local address = 192.168.1.50 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: remote address = 192.168.1.51 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: pppd options file = /etc/ppp/pptpd-options Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Client 82.132.248.216 control connection started Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 1) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Made a START CTRL CONN RPLY packet Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: I wrote 156 bytes to the client. Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Sent packet to client Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 7) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Set parameters to 100000000 maxbps, 64 window size Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Made a OUT CALL RPLY packet Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Starting call (launching pppd, opening GRE) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: pty_fd = 6 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: tty_fd = 7 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: I wrote 32 bytes to the client. Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Sent packet to client Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): program binary = /usr/sbin/pppd Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): local address = 192.168.1.50 Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): remote address = 192.168.1.51 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Dec 11 21:06:30 <HOSTNAME> pppd[22627]: pppd 2.4.5 started by root, uid 0 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Using interface ppp0 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Connect: ppp0 <--> /dev/pts/3 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: GRE: Bad checksum from pppd. Dec 11 21:06:31 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 15) Dec 11 21:06:31 <HOSTNAME> pptpd[22626]: CTRL: Got a SET LINK INFO packet with standard ACCMs Dec 11 21:07:00 <HOSTNAME> pppd[22627]: LCP: timeout sending Config-Requests Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Connection terminated. Dec 11 21:07:00 <HOSTNAME> avahi-daemon[1042]: Withdrawing workstation service for ppp0. Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Modem hangup Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Exit. Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: GRE: read(fd=6,buffer=6075a0,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Reaping child PPP[22627] Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Client 82.132.248.216 control connection finished Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Exiting now Dec 11 21:07:00 <HOSTNAME> pptpd[5803]: MGR: Reaped child 22626 As far as Cisco are concerned, all I need is ip nat source static tcp <SERVER LAN IP> 1723 interface FastEthernet4 1723 but of course this doesn't seem to the be helping the GRE traffic through as it should. Trying the connection to the LAN IP of the server from the same LAN as the server (behind the router), the PPTP connection works fine, so I'm confident that the server's config is ok. Furthermore, all I needed on my WAG320N was to open 1723 in the firewall. Here's my current router config: ! ! Last configuration change at 20:20:15 UTC Tue Dec 11 2012 by xxx version 15.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname xxx ! boot-start-marker boot-end-marker ! ! enable secret 4 xxxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 xxx quit ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! ip domain list dmz.xxx.local ip domain list xxx.local ip domain name dmz.xxx.local ip name-server 192.168.1.x ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn xxx ! ! username admin privilege 15 secret 4 xxx username joe secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.x 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.x 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ! ! ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ! ! access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.1.0 0.0.0.255 ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 exec-timeout 15 0 login authentication local_auth line aux 0 exec-timeout 15 0 login authentication local_auth line vty 0 4 access-class 2 in login authentication local_auth length 0 transport input all ! ! end UPDATE 16/12/2012: The only progress that I have been able to make on this issue is that I'm confident that the issue is caused by the GRE tunnels (which are required for the PPTP connection to complete) are being blocked. When attempting a connection, I can see in show ip nat nvi translations that both a TCP translation on 1723 is setup and also a GRE translation is setup also. I appear to be able to see GRE related packets on the LAN that the server is on, so I am lead to believe that the server is sending(?) GRE packets, however running Wireshark on a client PC when attempting a connection shows absolutely no GRE packets. Whilst there are no configuration directives in my config posted above (that I can pin point) which would specifically block them, it would appear that the GRE packets are not being allowed in/out of the router's firewall, even though a NAT translation entry is setup to the server's LAN address. Would anyone be able to provide me with some help to ensure that GRE packets are not blocked by the router's firewall, so that this can be ruled out as a possible issue please?

  Read the article

• Weblogic 10.3 weblogic.jar classpath issues

  - by user63063

  I am upgrading an old WLS8.1 app to 10.3 (11g) My ant build includes only the new weblogic.jar in the compile classpath and the build runs with no issues but when I include weblogic.jar as a libeary in the IDE (Intellij) i see many unresolved imports (for example: weblogic.xml.xpath.DOMXPath) when I check the weblogic.jar I see that the classes are indeed missing from it. compiling with verbose revealed that by including weblogic.jar in the ant classpath, many other jars in the BEA_HOME/modules are loaded to the classpath as well (for example: com.bea.core.xml.weblogic.xpath_1.4.0.0.jar) Can anyone explain what is going on? How can I fix my IDE classpath - do I need to import all the module-jars? Many of the module jars seems like they are there to support old deprecated weblogic 8 APIs (like: weblogic.xml.xpath.DOMXPath) how can I exclude these modules from my ant build? (I want to expose the APIs I need to upgrade) Thanks, NY

  Read the article

• Mysterious @ character in the Windows Registry

  - by Karel

  When I navigate to "HKEY_LOCAL_MACHINE\SOFTWARE\Classes\WMP.PlayCD\Shell\Play" in The Windows Registry, I find one REG_EXPAND_SE named MUIVerb on my Windows 7 system. However in its contents it's carrying "@%windir%\system32\wmploc.dll,-6503" Now my question is: What does this @ character mean or do? I am an MS-DOS grown up and I haven't seen such a notation before. Should I interprete it as the @ like in an e-mail address? What is the final result. Does it become "C:\%windir%\system32\wmploc.dll,-6503" eventually ?

  Read the article

• Cannot write to registry while installing Microsoft Access 2010 - Error 1406

  - by Rillanon

  While installing I get an error: Microsoft Access 2010 encountered an error during setup. Error 1406. Setup cannot write the value to the registry key \Software\Classes\Interface{000C036F-0000-0000-C000-000000000046}\ProxyStubClsid. Verify that have sufficient permissions to access the registry or contact Microsoft Product Support Services (PSS) for assitance. I went to regedit to check on the key that the error was talking about but when I clicked on it it says file not found. I'm using 64bit Windows 7 Ultimate. Any ideas?

  Read the article

• Should app config files be in jboss/bin directory?

  - by djangofan

  I am a Integration Engineer for a software company. My development team has generated various jboss .ear applications that rely on configuration files being in the jboss/bin directory and setting the CLASSPATH externally using batch files (on Windows from an external LIB directory) rather than using jboss's internally loaded classes. Is this the right/standard way of doing things? Would some other location be better (for the config files) such as jboss/server/instancename/deploy or some other directory? Any opinons on how I can direct my development team to doing things in a best practices fashion?

  Read the article

• How to configure JAAS on JBoss?

  - by AntonioP

  Hey Im having a problem with "Failed to load users/passwords/role files: java.io.IOException: No properties file: users.properties or defaults: defaultUsers.properties found" error from jboss. No matter what I change in conf/login-config.xml always that same error. Turning on TRACE for org.jboss.security shows that it does Security domain: myapp followed by findResource: null and the above error. Ive tryed adding a users.properties to my .war WEB-INF/classes/users.properties to no avail. Why is jBoss doing like this? What is this JAAS and why does it need it? What does it require, where to put what files, if its possible Ill remove all of this org.jboss.security.auth.spi.UsersRolesLoginModule completly, just let me use my app. Thanks

  Read the article

• IIS FTP - Users Last Logon

  - by Izzy

  How would you determine the last FTP logon time/date for a bunch of local user accounts on a DMZ (standalone/workgroup) server running IIS FTP? I know I could use a log aggregator and sift through it that way, but this server has been operational for approximately 8 years and I don't fancy that vector. I have also tried the scripting route, but this is of no use because the users have never actually logged onto the machine, so there's no profile (rendering the WMI classes *WIN32_UserAccount* and *WIN32_UserProfile* useless). They're just used to access the FTP service. Thanks in advance

  Read the article

• What would be better in my case - apache, nginx or lighttpd ?

  - by The Devil

  Hey everybody, I'm writing a php site that's expected to get about 200-300 concurrent users browsing it. When initializing the application will load about 30 php classes, some 10 maybe 15 images and a couple of css files. So my question is what else can I do (except optimizing my code and using apc/eaccelerator for php) to get as close as possible to those numbers of concurrent users ? Currently we haven't chosen a server for the site to be hosted on but most probably it'll be a VPS Dual core + 2 or maybe 4gb ram. Is it possible for such a server to handle that load ? Also how could I test it myself and be sure that it'll be able to handle it ? Thanks in advance, Me

  Read the article

• Does splitting out Data, Logs, and TempDB matter using a SAN with SQL 2008

  - by MVCylon

  I'm not a server admin. So be gentle. But I was just at a conference and in one of the training classes the Instructor explained some SQL DBA best practices. One of which was to separate out Mdf,Ldf, and TempDB onto different drives to increase performance. Now at our office we have a san. The Sys Admins created 3 san drives one for data, one for Logs, and one for TempDB. My intuition tells me that was a wasted effort...was it? I don't know alot of the details, but if you ask i'll try to fill in any specs needed to answer this question accurately.

  Read the article

• Setting up JDK 7 for IntelliJ on the Mac

  - by Fergal

  I installed the JDK by downloading the dmg from the Oracle website here: http://www.oracle.com/technetwork/java/javase/downloads/jdk7u9-downloads-1859576.html After installation I tried to setup the JDK in IntelliJ but when I set the location to the JDK in the Project Structure-SDKs screen, only a few libraries were loaded and many (including all libraries from Content/Classes/) were missing. How can I add all of the necessary libraries libraries? The install location for the JDK is /Library/Java/JavaVirtualMachines/jdk1.7.0_07.jdk/Contents/Home I've tried looking in /System/Library/Frameworks/JavaVM.framework/Versions/ to no avail.

  Read the article

< Previous Page | 433 434 435 436 437 438 439 440 441 442 443 444  | Next Page >