Search Results

Search found 12149 results on 486 pages for 'palm desktop'.

Page 438/486 | < Previous Page | 434 435 436 437 438 439 440 441 442 443 444 445  | Next Page >

• HD working with IDE USB adapter but not recognised by bios

  - by Rajeeva

  I have a Windows XP Pentium III desktop with two hard drives. The first one has the OS and is luckily working. The second drive on the secondary master IDE channel few days back was unable to read some files and since then for some time it was failing and reviving intermittently and now it is always showing as failed on the IDE channel When the HD was intermittenly failing, I was able to copy some data from it to the other drive - also during that time if the system was running and the hard disk failed at that time, the system froze and then i had to reboot. then I got a new 80 gb hdd similar (same make - seagate barracuda) to the earlier failing one, a new data cable for the drive and an IDE to USB adapter. the new hard drive i installed in the previous drive's place (secondary master), formatted it and it worked for 1 day and then it also failed - simultaneously i connected the old hd to the IDE/USB adapter and i could view all the data - some of that data i was able to back up from the old hd to the new hd before the new hd failed the new hd i have tried connecting on the primary channel as the slave disk but when i do that then the bios does not detect either the OS drive or the new drive and the system does not boot surprisingly, the older (previously failed) hd and the new hd are both working fine on the usb channel with the IDE/USB adapter. i have ruled out any problem with the secondary channel since the dvd rom i was earlier using as primary slave have now connected to secondary master and it works fine. i am really confused by this behavior on my system. please can anybody try to solve this for me. thanks.

  Read the article

• Print over remote CUPS server, but just show a subset of the printers.

  - by jdm

  I'd like to print from my Ubuntu laptop (karmic) to some networked printers. Our organisation uses a CUPS server with several hundred printers. What I know I can do is: CUPS_SERVER=printers.company.com acroread document.pdf and then Adobe Reader shows me all available printers to select from. However, it takes a couple of minutes to display the large list, which is really annoying. (The desktop PCs here suffer from this, too.) The other option is to add a new printer with an address like ipp://printers.company.com/printer/bldg1_hp8150 (to the Ubuntu printer configuration = local CUPS server). However, it asks me for a driver. I don't want to / can't always specify a driver, since some printers don't appear in the list. I'd like to let the remote CUPS server handle the driver part (like it does when i set CUPS_SERVER), and do no more preprocessing/"driver stuff" on my side. The ideal thing would be if I could somehow add the remote printer list to my local cups server, and apply a filter, so that it would just display printers a la bldg1_*. This feature was available in KDE3.?, but I can't find something similar in Ubuntu/Gnome. Any suggestions?

  Read the article

• What mobile phones are viable for a "nerdy" person? [closed]

  - by Blixt

  This community wiki is for determining a list of good mobile phone choices if you are "nerdy" (definition follows.) As a point of reference, the almost two years old N95 8GB will be used. Mostly because that's what I can most relate to since I've had it since it came out. Today, iPhone and other modern mobile phones really out-shine it in usability and interface. However, it still does everything I want it to do (and here's the definition of "nerdy"; modify as needed): Syncs contacts, calendar, tasks and mail in the background Can run multiple installable applications in the background (Google Maps with Latitude, for example) Good amount of space for music etc. Lets you develop your own little toy applications (Python; not to mention it can also run an Apache server with a public URL!) Tethering! Supports Flash (maybe not very important, but it has its uses) Has a manufacturer that believes in the nerdiness! (The people at Nokia Labs make lots of cool stuff and share early versions with the community and are generally open) A high resolution screen (at least 320x240) Special hardware features such as an accelerometer and GPS What's missing from the N95 8GB but still qualifies as good, "nerdy", qualities: 7.2 Mbit/s (or faster) internet through HSDPA or HSPA+. A good web browser that can do most of the stuff a desktop browser can (especially render sites properly and run JavaScript correctly) Touch (especially multi-touch) More special hardware features such as a compass Intuitive and fluent user interface (Shiny stuff) Ability to configure it to trust root certificates of my own choice A processor fast enough to run Quake 3! =)

  Read the article

• Can I autoregister my servers hostname in my local DNS? [on hold]

  - by Christian Wattengård

  We have evaluated a W2k12 server as a domain controller at work. This has the extra benefit of registering every "subordinate" computers name in it's DNS so that I don't have to go around remembering IP's all the time. (And it let's me easily run dhcp also on my "pop-up" dev-servers). We need to rework our work network for several odd reasons, and in this new scenario there was no money for an extra Windows 2012 license. We have at our disposal several old boxes that run linux quite well. Is it possible to set up a DNS-server-"appliance" that somehow autoregisters it's own hostname.. Scenario: Router (N66u) on 172.20.20.1. Runs DHCP on 172.20.20.100-200 range. Server [verdant] of a *nix flavor on 172.20.20.2 Laptop [speedy] of W8 flavor on DHCP assigned Laptop [canary] of W8 flavor on DHCP assigned Desktop [lianyu] of Ubuntu flavor on DHCP assigned What I would like is that all of the above servers (except possibly the router) would be available on verdant.starling.lan and canary.starling.lan and so on. This is how it works right now (except the Ubuntu box... I haven't cracked that one yet) because Windows just does this for you.. I would also be able to do this without any manual labor on the server. When I tell my box it's name is smoak it should "immediately" be available as smoak.starling.lan without any extra configuration on my part. How can I do this in a Linux (Ubuntu) environment?

  Read the article

• How to make Microsoft JVM work on Windows 7?

  - by rics

  I am struggling with the following problem. I cannot install MS JVM 3810 properly on Windows 7. When I start Interner Explorer 8 without starting any java 1.1 programs choosing Java custom settings under Internet options causes the crash of the browser. I have some Java 1.1 programs that work well in Internet Explorer 8 on Windows XP after the installation of MS JVM 3810. I know that it is not advised to use this old JVM but it is not a short-term option to port the programs in newer Java since it contains 3rd party components. Complete rewrite is a long-term plan. Strangely jview and appletviewer (jview /a) works from a console so the MS JVM 3810 is not completely busted just IE 8 does not like it. The problem with the appletviewer is that it cannot connect to the server even if both signed and unsigned content in Java custom settings have been set to Enable all. (Since Java custom settings was unreachable due to the crash the modifications - including My computer - were performed through the registry and pre-checked to behave correctly on Windows XP and Internet Explorer 8.) If jview was working then I could at least think of a workaround. Is there a way to configure MS JVM or jview properly on Windows 7? Another options would be: Checking Internet Explorer 9 Beta. Using virtualbox and Windows XP older IE in it. Delaying Windows 7 upgrade. ... Update Finally we have modified all the programs to work parallelly as applet and application as well. This way the programs can still be used from browser on older Windows versions. On Windows 7 the applications are started from the desktop. Installation to all user machine can easily be solved since they already have a large common application drive. The code update is fortunately only a few lines of modification: including a main method in the applet class. Furthermore instead of the starting html page a bat file is used to set the classpath before the startup with jview.

  Read the article

• Is my motherboard failing, or is there some other issue?

  - by ThatGuy

  So, several months ago I put together my own desktop PC. I set up a dual boot to Windows and Ubuntu. Recently, without changing any settings or installing anything new, the wifi stopped working on windows (I use a wifi adapter). It said it was connected, Network settings showed that it was working and running trouble shooting had no results. My internet still works on any other device. I found that removing the adapter from the motherboard and plugging it back in was the only thing that fixed the problem. Reinstalling the wifi drivers did not help. I purchased a new Wifi adapter, but the problem persists. More recently, I had a much more discouraging development. Sometimes, turning on the computer results in a boot loop: BIOS never starts. Instead, the monitor turns on as if it got a signal, then immediately turns off. This loops on it's own indefinitely until I hold down power, hard reset it, and try again. Sometimes it works, sometimes it doesn't. I haven't tested much on the Ubuntu side. It appears that wifi works at least some of the time, but since I've had issues just getting to BIOS I'm not confident the issue is on the software side. I've also noticed issues with some of the USB ports no longer working, but that seems to be off and on. Finally, as of a few minutes ago, I booted to windows to discover that everything was running very slowly. Slow here is a relative word, but I have a Samsung 840 pro SSD and I'm used to applications running nigh instantly, and it was a solid 3 minutes before any of my applications would load. Anyway, my question is this: Is it likely that my motherboard is failing? Either way, what steps can I take to try and pin down the problem and figure out what to do?

  Read the article

• Windows module installer delaying login, server 2008 R2

  - by Kyle

  We updated our servers this weekend (windows updates), everything went fine except one of our terminal servers now hangs at login with the message, "waiting for windows modules installer." It eventually times out and leaves an event log message that the service has stopped unexpectedly. I have disabled the service and users can now login in a reasonable time frame. However we will need to re-enable the service in order to install further updates. I'm not sure where to start with this one, I'm an entry level admin and my colleagues are on vacation today, thank God this isn't a serious problem. Further details: -It affects all users. -The only third party software on the server is our ERP software and screwdrivers from Tricerat. -The only event log message is that the service has stopped unexpectedly. -The server manager screen does not display any information about roles it just says, "error". -The remote desktop roles all seem to be functioning properly, Remote app works as well as standard RDP. Let me know if there is any further details I can provide, I will be checking this frequently throughout the day.

  Read the article

• Network bandwidth usage dashboard?

  - by SkippyFlipjack

  I have a couple of wifi access points hooked up to my home network, one of which I keep unsecured for some development I do; there are only a couple other homes within range and they've got their own wifi so it's not a big concern. I also have a Sonos system, Tivo, Roku, a couple laptops, a couple phones, an iPad and a desktop machine, all of which are internet-smart. So when my internet bandwidth tanks and it takes five minutes to load a YouTube video, I want to know what's going on, and there are many potential culprits. I'd like to be able to plug my MacBook into the primary router and see a nice little dashboard of the units on the network and what kind of bandwidth each is using at that moment. I could figure this out from WireShark or tcpdump but figure there has to be an easier way. I've tried a few different commercial products but none really presented the right info. Suggestions? (This may be a question for superuser since my Apple Time Capsule's SNMP capabilities are limited, but I figure admins of small business networks would have dealt w/ the same issue..)

  Read the article

• Write stderror to a file using PowerShell

  - by Zian Choy

  How do I capture error messages from a PowerShell-launched command in a text file? I searched the Internet for a while and found that supposedly, I should be able to do something like cmd /c "big blob of text >C:\output.txt 2>c:\errors.txt" to direct the output to output.txt and the errors to errors.txt but when I try to run the command, I get the following error: cmd.exe : The filename, directory name, or volume label syntax is incorrect. At C:\Users\Zian\Desktop\Untitled1.ps1:27 char:4 + cmd <<<< /c $command + CategoryInfo : NotSpecified: (The filename, d...x is incorrect.:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError Furthermore, if I try to run the command without everything starting at "2", then the command executes correctly and output.txt catches the right output. I looked at Redirect stderr to variable in powershell but it wasn't helpful because the answer to that question suggests capturing the entire output and filtering it in memory. In my case, I am backing up every database on a computer and since the databases won't fit in my laptop's RAM, I cannot use the question's solution. I also found tantalizing suggestions about using $err = @(command goes here) but with no information on what to do other than simply inserting that line of text. I tried to utilize the search function on Serverfault with the string "@()", but it did not return any results. What can I do to get the error messages into errors.txt?

  Read the article

• In need of assistance for recovering a lost partition

  - by Tek

  The program that has worked for the most part is Active@ Partition Recovery. I'm so close but yet so far from recovering my data. Okay so here's what happens. In the following screenshot (blanked out a folder and filename with profanity in case some of you guys are at work :P), it detects the partition I accidentally deleted with ALL 100% of my data listed. Of course, I didn't write ANY data to that drive after I did this. But when I click "recover" and finishes the recovery process, in Windows I click on the partition that was just was just recovered... It's EMPTY. The program seems to be able to see my lost files, but when I recover the partition windows doesn't seem to think the same =( Things I tried: I tried running a chkdsk /r /f after I recovered the partition, apparently it couldn't find any errors. Tried using other software like TestDisk to recover the partition, but they (all) act similar to Windows in that it detects the (missing) partition but when I browse it there's no files. The partition is there along with all the file and data information. The sector information is also in the screenshot, is there any way I can use this to my advantage in recovering my data? Other information: Dualboot: Win8 / Ubuntu 12.10 x64 1TB Internal desktop drive, GPT Layout, NTFS formatted drive, 64K allocation size.

  Read the article

• Create taskbar shortcut to website in Window 7

  - by BJ292

  I'd like to create a shortcut to a website in Windows 7 on the taskbar that is not pinned to the default web browser. Currently if I drag the favicon from the left end of the firefox address bar to the Win 7 taskbar it will pin a shortcut to the firefox browser icon. Similarly if I create a shortcut on the desktop to a website and drag it to the taskbar it will also end up pinned to the firefox icon. The problem with this is to get to that shortcut I have to right click on the firefox icon and then select the pinned shortcut. That is workable for me but I want to do this for a child - so the shortcut needs to be right there on the taskbar as a stand-alone item. There is a workaround that pretty much solves the problem - create a new folder somewhere safe - create the shortcut to the website in the new folder - right click the taskbar and select toolbars - new toolbar - then browse to the folder you created and select it as the new toolbar. The contents of the folder will now appear on the taskbar as shortcuts. You need to drag it from the right hand end of the taskbar into the middle - turn off show titles and show text and make the icon large. I'd call this a 75% solution. Anyone know how to make a web shortcut that looks and operates just like any of the other shortcuts on the taskbar?

  Read the article

• Windows 7 boot animation slows down startup by default?

  - by kngofwrld

  I just upgraded my HDD to an SSD drive. I am running a completely fresh install and enjoy the short boot time. I tweaked the startup to be as fast as I could by removing unneeded apps and such. Nor am I running a solid desktop background (which causes a 30-sec startup delay). I have a 2.1ghz 64 bit laptop with 4 gigs of ram, so it's not a liquid-cooled speed monster, but I checked some super high end PC boot vids on YouTube and noticed that they startup in almost the same time as my machine. I also noticed that the glowing Windows 7 animation plays all the way no matter how fast the PC is. I turned off the animation, and the startup time is unchanged. I turned on verbose startup info and noticed that it runs until the very end, where it looks like it just sits there for no reason waiting for something to happen for a few seconds. So now I think that the Windows 7 startup animation has a timer built into it that forces the computer to wait for no other reason than to play the full animation. Super-fast XP boot vids on YouTube seem to start much faster (and not just because they "have less to load"). Am I imagining things? My question is: How can I turn off not just the animation, but the timer for the animation. Here is a vid that tipped me off, I have no relation to the poster. (warning: soundtrack might be loud) http://www.youtube.com/watch?v=T5LkX3xejJ4

  Read the article

• Fedora 19 no longer bootable

  - by Parisa

  I had fedora dual-booted with windows on my laptop for a while but with windows refresh grub was gone and my system directly booted windows. I booted fedora with my systems boot options and with this tutorial: https://fedoraproject.org/wiki/GRUB_2 I reinstalled grub2 but then had my system booted into an empty grub prompt: grub So I found the drive containing vmlinuz and initramfs (completely sure about thair location and versions) and tried to manually boot it but after the boot command it said: no suitable video mode found booting in blind mode and nothing happened. Such a tragedy... I have already tried to use live disks rescue system. Funny but troubleshooting options don't apear on my laptop while they do on my desktop pc. I cant even go to boot prompt on my lenovo idepad z400 laptop. I also tried EasyBCD so maybe I could boot it with windows but it comes up with this error: missing AutoNeoGrub().mbr Now I have removed the grub prompt (don't know why) and its really hard for me to reinstall my dearly customized fedora. If anyone knows a way to help boot it again or reinstall it keeping my files and installations I really need it. Thanks PS:I have already tried Boot-repair Disk but it asks me to enable the repo containing grub-efi on my fedora to reinstall the grub2 and fix the boot for me (how could i?).

  Read the article

• Eclipse CDT wont recognize standard library

  - by Mike G

  I work primarily on my desktop, but I started working on my mac laptop and noticed a problem with eclipse CDT. The standard library was underlined yellow and cout wouldn't work (It wouldn't recognize/find it). I tried restarting the program and that didn't work. I then tried to see if xcode would work, found that the version of xcode was too old, and updated xcode. Eclipse still didn't work, but xcode did. I tried re-installing eclipse to the new version and re-installing cdt. It still wouldn't work. Restarting my computer wont work either. I'm not sure if this helps (or even matters/applies) but when I type g++ --version into terminal, it doesn't work. (I don't know if that matters but some tutorial told me to do that to check if the compiler was working). So, in review, I have: Re-installed eclipse Restarted my computer Re-installed xcode (which I think has all the compilers eclipse uses.) Updated Eclipse Typed g++ --version to test compiler.

  Read the article

• Understanding where an amazon ec2 instance run?

  - by kenzo450D

  I am currently using the aws api from my local desktop. I can successfully take backups of my amazon volumes, and even create an ami from it. Now when i wanted to run the instance to be built from this ami, where does the instance run? In their Elastic Cloud or the computer from which the command was issued. Suppose I want to create the new instance in a new region? (locations as defined in ec2-describe-regions) How would I do that? It seems i have a bad knowledge about how the relation between amazon volumes and instances? Please explain it. I am only allowed to use the CLI tools to do all of my work. I made a new snapshot of the existing instance, made an ami using ec2-register, made a keypair, and then followed these steps, http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/launching-an-instance.html#launching-an-instance-cli but i got an error as this Client.InvalidParameterValue: The requested instance type's architecture (i386) does not match the architecture in the manifest for aki-fc37bacc (x86_64) my local computer is 32bit. But I do not want to load instance on the local computer but on amazon servers?

  Read the article

• Cisco AnyConnect VPN client - prevent connecting as work network

  - by Opmet

  From Windows 7 I'm using "Cisco AnyConnect Secure Mobility Client 3.0" to connect to our corporate network. Every time I establish the VPN connection Windows will set the type as "work network". I don't want this. So I go to "network and sharing center" and manually / interactively change it to "public network". But I have to repeat it for every new VPN connection. Is there any way to make Windows remember / persist this configuration? Can it be configured in the VPN client? Do our IT admins need to change something at server end? Motivation: A "work network" per default uses different firewall settings that allows for stuff like "network discovery" and "file shares". But I just need "remote desktop" (mstsc). Additional info: Our IT admins claimed this would be Windows default behaviour and there was nothing we could do about it: Windows would always initiate a VPN connection as "work network". Based on this statement I assume this is a "general" issue and went ahead posting here (at superuser.com).

  Read the article

• Diagnosing RAM issues

  - by TaylorND

  I have an old Acer Aspire T180 desktop. The specs are as follows: AMD Athlon 64 3800+ 2.4GHz 1GB DDR2 SDRAM 160GB DVD-Writer (DVD±R/±RW) Gigabit Ethernet 17" Active Matrix TFT Color LCD Windows Vista Home Basic Mini-tower AST180-UA381B According to the information in the computer's documentation the computer comes with 1 GB of RAM. It has two DDR2 SDRAM sticks. I used to have Windows Vista installed. Then I removed it and install Windows 7, and now I have since removed Windows 7 and installed Windows XP. According to Windows XP with both RAM sticks in the computer has 768 MB. Isn't this supposed to be 1 GB of RAM or 1024 MB of RAM? Is the amount of RAM installed only partly used by the Operating System? Is there's something I'm missing? If I remove either one of the RAM sticks I'm left with 448 MB of RAM. These numbers don't seem to add up. If each of the RAM sticks contains at least 448 MB of RAM shouldn't they (both being in) provide 896 MB of RAM. Even then, isn't that less than a GB of RAM? I'm not too experienced in hardware so I thought this would be the best place to ask. As a follow up question, is the RAM I have enough to run/multitask with Windows XP efficiently? I plan to do a lot of computing with the system (although not gaming), should I invest in more RAM?

  Read the article

• How to change font size on display

  - by Tim

  My laptop is Lenovo T400, whose screen size is 14.1 inches and default resolution is 1440 x 900. My main OS is Ubuntu 10.10. The default font size on the display is somehow small, which might contribute to the fatigue of my eyes. My previous laptop is Acer 5000, whose screen size is 15.4 inches and the default resolution is 1024 x 768. I like reading on my old laptop better than on my new one. Is it possible to change the setting of my new one to look like reading my old one? What are the parameters that control the font size? Are screen size, resolution part of them? In Windows, there are choices for font size, while in Ubuntu I haven't find out where I can change the setting and would like know if someone here knows about it. I also wonder if I can use a separate bigger display (perhaps just like a desktop display) as the display of my laptop, in case I don't want to enlarge font size at the cost of sacrificing the amount of the content to display, and how I shall do it? Thanks and regards!

  Read the article

• Is my "Generic" USB Flash Drive broken?

  - by Jesse J.

  So here is the situation. I find myself technological knowledgeable about many things ( I love to code, whether it's websites, C#, C++ or so on). However: My 2 toddlers (my wife actually) bought me a "Generic" 128 GB USB Storage Device (Usb Flash Drive) for Father's Day. I thought awesome at first..... WRONG! Nothing but problems with it. 3-4mb/s MAX transfer speed. I can bear with it. BUT! When I went to reformat my computer I transferred my save files from my games over to the stick and then the USB Stick managed to become corrupted. Not just a simple format would work either. It's screwed. I tried to use (Manually changed usb drive letter troubleshooting it to X) "chmod X: /X /F /R" with administrator rights, I did this after a long session to make it work with no errors (had to delete the log) and I finally recovered the files, however when I go to use it (transfer to or from) it transfers a couple kb to the stick or from it and then freezes, It says (Windows 7): Name: From: Folder (X:\File\Location) To: Folder C:\Users\Username\Desktop) Items Remaining: 0 (0 bytes) Speed: 0 bytes/second It does this forever... and ever... and ever... It transfered 3 files atleast, and then stopped. This is a new USB Stick bought from a "High" reputation company on eBay. Is the USB Stick screwed?

  Read the article

• Windows 7 pc freezes for an indeterminate amount of time after unlocking

  - by pikes

  Not sure if this type of question is appropriate for this forum, but I've tried everything I can think of to solve this problem aside from format/reinstall. I recently got a new work PC (Dell optiplex 755) with windows 7 professional x64. Standard developer software installed for .net development: VS2008, VS2005, SQL management studio, office 2007, etc. Recently I've been having this weird problem where after I lock my pc, when I try to unlock it, the screen will be black for awhile after unlocking. I can ctl+alt+del and put my password in but then it just goes black. The amount of time on the black screen seems to be related to the amount of time I am away from my PC. If only away a few minutes, it'll take about a minute to get to the desktop. If away for an hour, could take up to 15 minutes. If I lock it and go home for the night, I have to restart my PC in the morning (I've let it sit for an hour after a night of being locked and nothing happened). It doesn't do it every time but definitely the majority of the time. One weird thing I've seen is that if I remote into my machine before trying to log back in it does not do it. I uninstalled all software back to the point when I remember it started happening and it still does it. I was using this PC for a few weeks without this problem happening at all. Anyone know what my next troubleshooting steps could be? My IT department tried to fix it by moving my old profile to another disk and having me log in, effectively recreating a profile from scratch but that didn't solve it. As I said above if this isn't the right forum for these types of questions please let me know. Thanks in advance!

  Read the article

• Why can't I browse my D: drive, even if I'm in the Administrators group?

  - by Nic Waller

  My fileserver running Windows Server 2008 has two logical drives; the C: drive contains all of the system and application data, and the D: drive contains all of the business data. There are several shares on the top level of the D: drive that are working fine. However... When logged into the fileserver interactively via Remote Desktop, only the Domain Administrator and local Administrator accounts can browse the D: drive. I set up an account called "Maintenance" and added it to the local Administrators group, but when logged in with this user, I can't browse into the D: drive. The D: drive has the following permissions ACL: Full Access - SYSTEM Full Access - MACHINE\Administrators It won't even let me view the ACL for the E: drive. So I tried taking ownership of the E: drive, then I can read the ACL, and "Effective Permissions" says that I have full access. But I still get this error message. Location is not available D:\ is not accessible. Access is denied. Here's a screenshot proving that I get access denied even when I have Full Access. http://www.getdropbox.com/gallery/2319942/1/errors?h=2bd644

  Read the article

• Can I split one ethernet line coming out of my wall into multiple separate lines?

  - by Burteçin 'Turk' Sapta

  Hi all and thanks in advance. I'll start with some background. I live in an apartment which provides internet service included in the rent. They use company called pavlov for the internet http://pavlovmedia.net/ wireless seems to be working fine but wired connection is at least %30 faster. Ethernet, cat5 outlet is built in the wall, and there is only 1 outlet in each room. I would like to take this 1 outlet coming out the wall and multiply it into 4 wires, for desktop, playstation, tv and laptop without loosing any internet bandwidth. i have absolutely no idea weather this line is coming from a switch or a router but i have been researching Ethernet splitter, routers, switches, hubs and haven't found a solid answer. what is the best solution for me? thank you once again! EDIT: ok this picture cleared few things http://www.home-network-help.com/images/home-network-expanded.jpg so seems that an ethernet switch is to ethernet as a USB hub is to USB. what is really 10/100Mbps Network Switch and what is the cap?

  Read the article

• Ethernet cable unplugged after updating from windows 8.0 to 8.1

  - by Pehmolelu

  Yeah, so I went and updated my windows 8 pro to 8.1. Now everything else seems to work but the network. The Ethernet just says that Network cable is unplugged, even though it is plugged and I have tried different cord as well and I have tested that the router works. I have tried uninstalling the network drivers (Realtec PCIe GBE) and reinstall them with no success. After installing drivers the Device Management gives error for it "Device could not be started. Code 10" Before 8.1 update I had rt630x64.inf, after update it was netrt630x64.inf, and after installing the latest driver rt630x64.inf. With rt630x64.inf there isn't any error, but it's still not just working. New downloaded version: 8.020.0815.2013 (From Realtek website) The driver before: 8.1.510.2013 (After updating the windows to 8.1) I'm using Desktop PC, no VM. I dont have VirtualBox or Vmware installed. I have checked from BIOS that the card is enabled. I have booted in safe mode with network enabled. Says unplugged there as well. I have put the power off for few minutes and put back on, no effect. If anyone has any kind of suggestions, please tell.

  Read the article

• Windows preventing running of Telnet client

  - by palswim

  At first, I had issues because Windows 7 doesn't install the Telnet client by default (also, SuperUser has a thread). So, after installing it (and restarting, like Windows asked, though completely unnecessary), I opened a command prompt, and went to run my new Telnet program. I enter telnet, and receive: C:\Users\[USER]>telnet 'telnet' is not recognized as an internal or external command, operable program or batch file. "That's odd," I think to myself. So, in Windows explorer, I navigate to \Windows\System32 and see telnet.exe sitting in that folder. If I double-click on the executable file, the Telnet command prompt opens for me without a problem. So, I return to my Windows Command Prompt, and enter: C:\Users\[USER]>\Windows\System32\telnet.exe '\Windows\System32\telnet.exe' is not recognized as an internal or external command, operable program or batch file. And then (grep comes from cygwin): C:\Users\ryan\Desktop>dir \Windows\System32 | grep telnet Nothing. I've disabled UAC and have no idea why my Command Prompt is lying to me. Anyone experience something similar? To recap: In Windows 7, I have installed Telnet and can see it in my System32 folder, but cannot run it via a Command Prompt.

  Read the article

• Why is my new PC so slow at startup?

  - by rumtscho

  Bought a new PC this weekend, and it works really good. Only I have one big problem: startup time. Its BIOS needs 62 sec to load, then from Grub start to pw entering screen it's another 26 sec. I think this is a lot, because my old PC needs 34 sec for BIOS and another 8 sec to pw screen. After I enter the pw, the desktop is usable with practically no delay on both. The new PC is a core i7-930, running a Lucid Lynx 64 bit from a Intel Postville SSD (no internal HDs). The old PC is a Pentium 4 celeron (forgot the clock speed) running a Lucid Lynx 32 bit from an ATA 100 hard drive. Neither PC is overclocked. The new one has boot sequence 1.DVD ROM, 2.SSD (connected over SATA in AHCI mode), 3. removable drive. The old one boots from 1. DVD ROM, 2. HDD, 3. Floppy. Neither has a second OS installed. The new one has less software installed than the old one (I think), but the boot time difference was noticeable even before I made any installs. As far as I know, just the SSD should be enough to make a noticeable difference in boot time. I thought that having a good mainboard on the new PC as opposed to the basic office model on the old one would also mean a faster loading BIOS. If these assumptions are right, I guess I must have misconfigured something in the BIOS of the new PC. How should I configure it for a fast boot? It has an ASUS P6X58D board with an AMI BIOS, if you need the BIOS revision number I could post that too.

  Read the article

< Previous Page | 434 435 436 437 438 439 440 441 442 443 444 445  | Next Page >