Search Results

Search found 16021 results on 641 pages for 'mr nothing'.

Page 439/641 | < Previous Page | 435 436 437 438 439 440 441 442 443 444 445 446  | Next Page >

  • tftpd-hpa service must be restarted before working after fresh boot

    - by Steve
    I'm running Ubuntu 12.04 inside a VirtualBox VM. I've installed tftpd-hpa so I can boot an embedded Linux device via tftp. My problem is that after a fresh boot of the VM, tftpd doesn't seem to work until I restart the service, after which is works great until the system is rebooted. The transcript below should explain the situation. EDIT: After the fresh boot, I execute netstat -a | grep tftp and find nothing. After restarting the service, the same command returns udp 0 0 *:tftp *:* (whitespace removed). I think this might be the key to the problem, I'm just not sure how to resolve it. I don't think it's related to this specific issue, but I had another problem with tftpd that was asked and answered in this question. steve@steve-VirtualBox:~$ cat /etc/default/tftpd-hpa # /etc/default/tftpd-hpa TFTP_USERNAME="tftp" TFTP_DIRECTORY="/var/lib/tftpboot" TFTP_ADDRESS="0.0.0.0:69" TFTP_OPTIONS="--secure" steve@steve-VirtualBox:~$ ls -l /var/lib/tftpboot total 8204 -rw-r--r-- 1 root root 34352 May 28 08:22 am335x-boneblack.dtb -rw-r--r-- 1 root root 33206 May 28 08:22 am335x-bone.dtb -rw-r--r-- 1 root root 41564 May 28 08:22 am335x-evm.dtb -rw-r--r-- 1 root root 38048 May 28 08:22 am335x-evmsk.dtb -rwxr-xr-x 1 root root 4117904 May 20 09:39 zImage -rw-r--r-- 1 root root 4117616 May 28 08:22 zImage-am335x-evm.bin steve@steve-VirtualBox:~$ tftp localhost tftp> get zImage Transfer timed out. tftp> quit steve@steve-VirtualBox:~$ sudo service tftpd-hpa restart [sudo] password for steve: tftpd-hpa stop/waiting tftpd-hpa start/running, process 2106 steve@steve-VirtualBox:~$ tftp localhost tftp> get zImage Received 4143798 bytes in 1.4 seconds tftp> quit steve@steve-VirtualBox:~$

    Read the article

  • PGB Multipath & return routes

    - by Dennis van der Stelt
    I'm probably a complete n00b concerning serverfault related questions, but our IT department makes a bold statement I wish to verify. I've searched the internet, but can find nothing related to my question, so I come here. We have Threat Management Gateway 2010 and we used to just route the request to IIS and it contained the ip address so we could see where it was coming from. But now they turned on "Requests apear to come the TMG server" so ip addresses aren't forwarded anymore. Every request has the ip of the TMG server. Now the idea behind this is that because of multipath bgp routes, the incoming request goes over RouteA, but the acknowledgement messages could return over RouteB. The claim is that because the request doesn't come from the first known source, our proxy, but instead from IIS, some smart routers at the visitor of our websites don't recognize the acknowledgement message and filter it out. In other words, the response never arrives. Again, this is the claim. But I cannot find ANY resources on the internet that support this claim. I do read about pgb multipath, but more in the case that there are alternative routes when the fastest route fails for some reason. So is the claim completely bogus or is there (some) truth to it? Can someone explain or point me to resources? Thanks in advance!

    Read the article

  • sendmail relay status

    - by Andy
    Hello all, I have a RHEL3 server with sendmail configured to relay mail to: # "Smart" relay host (may be null) DSmailrelay This relay server is an exchange server not administered by me. A few days ago its IP address was changed without my knowledge so I've updated the correct ip in /etc/hosts for the mail relay entry. Unfortunately no mail is currently going through and maillog reports: Oct 26 14:32:39 fsimag sendmail[12580]: n9Q3VxPA012580: from=root, size=3685, class=0, nrcpts=1, msgid=<~R.*.2009102614315955@*>, relay=root@localhost Oct 26 14:32:39 fsimag sendmail[12580]: n9Q3VxPA012580: to=wodwest@*.net, delay=00:00:40, mailer=esmtp, pri=33685, dsn=4.4.3, stat=queued Oct 26 14:36:09 fsimag sendmail[13670]: n9Q3ZTcf013670: from=root, size=5831, class=0, nrcpts=1, msgid=<~R.medicus.2009102614352914@*>, relay=root@localhost Oct 26 14:36:09 fsimag sendmail[13670]: n9Q3ZTcf013670: to=tsgastro@(.net, delay=00:00:40, mailer=esmtp, pri=35831, dsn=4.4.3, stat=queued Oct 26 14:36:50 fsimag sendmail[13882]: n9Q3aAxj013882: from=root, size=5830, class=0, nrcpts=1, msgid=<~C.medicus.2009102614361009@*>, relay=root@localhost Oct 26 14:36:50 fsimag sendmail[13882]: n9Q3aAxj013882: to=elmwood@*.net, delay=00:00:40, mailer=esmtp, pri=35830, dsn=4.4.3, stat=queued (With domains obscured) The mailq command shows nothing, and I've also tried connecting to this new mail server via telnet and manually sending and reports as being queued but not sent. The administrator of this machine has put it back to me saying he sees no problems, and I just want to cover everything before passing it back to him. Is there any other tests/logs/reasons for sendmail to only report it as "stat=queued" ? I've looked in previous logs and the relay is set to root@localhost in those but none were ever set to queued. Thanks for any help, Andy

    Read the article

  • Exchange 2003 ActiveSync problem

    - by colemanm
    We're having problems getting iPhones to sync properly with SBS 2003 Exchange. When you add a new Exchange ActiveSync account on an iPhone and enter all the pertinent information, it shows a "Verifying Exchange account info" message for a minute or so, then says everything's verified and asks what you want to sync, Mail, Contacts, Calendars... so it looks like it's working. However, when you go to the Mail app and select the Exchange email account, it just shows an "Inbox" folder with nothing in it. When you try refreshing, it attempts for a second, then says "Last Updated" with a timestamp, as if it worked, but there's no mail and no error message/feedback at all. I think I've narrowed it down to some sort of certificate issue, but I'm having trouble finding out where to go from here... I ran MS's Exchange connectivity testing tool with these results: Our cert was purchased from Network Solutions, and I'd already added it to the IIS Default Website for OWA purposes. But this report makes it look like the cert is somehow problematic. I don't know what to do now... Here's a shot of the cert details, just in case:

    Read the article

  • Can't seem to get python to work

    - by Justin Johnson
    I'm just starting out in Python. The Python interpreter works from the command line (I have 2.4.3), but I can't seem to get Apache to execute Python scripts. All I end up with is a blank screen and nothing in the Apache error logs. I enabled Python via the Plesk control panel. Here's the snippet that was generated in the httpd.include: <Files ~ (\.py$)> SetHandler python-program PythonHandler mod_python.cgihandler </Files> My test script is one of the examples that comes with the Python downloads at http://python.org/download/ #!/usr/local/bin/python """CGI test 1 - check server setup.""" # Until you get this to work, your web server isn't set up right or # your Python isn't set up right. # If cgi0.sh works but cgi1.py doesn't, check the #! line and the file # permissions. The docs for the cgi.py module have debugging tips. print("Content-type: text/html") print() print("<h1>Hello world</h1>") print("<p>This is cgi1.py") That wasn't working, so I changed #!/usr/local/bin/python to #!/usr/bin/python which is what which python tells me but the results were the same. Like I said, I'm ending up with a blank page. No errors that I know of, unless I'm checking the wrong error log (I'm checking the Apache error log). I'm on a MediaTemple (dv) running CentOS.

    Read the article

  • How do I get netcat to accept connections from outside the LAN?

    - by Chris
    I'm using netcat as a backend to shovel data back and forth for a program I'm making. I tested my program on the local network, and once it worked I thought it would be a matter of simply forwarding a port from my router to have my program work over the internet. Alas! This seems not to be the case. If I start netcat listening on port 6666 with: nc -vv -l -p 6666, then go to 127.0.0.1:6666 in a browser, as expected I see a HTTP GET request come through netcat (and my browser sits waiting in vain). If I go to my.external.ip.address:6666, however, nothing comes through at all and the browser displays 'could not connect to my.external.ip.address:6666'. I know that the port is correctly forwarded, as www.canyouseeme.org says port 6666 is open (and when netcat is not listening, that its closed). If I run netcat with -g my.adslmodem's.local.address to set the gateway address, I get the same behavior. Am I using this command line option correctly? Any insight as to what I'm doing wrong?

    Read the article

  • Is there any limit to AIX 5.3 pipe size ?

    - by snowflake
    Hello, I'm in trouble while performing cat/tail/head operation on large files on Aix 5.3. When asking for a cat of several 1Go file redirected to another one: cat file1 file2 file3 > outputfile The outputfile is limited to 2Go (cat: output error and result file is 2147483647 bytes) Filesystem is jfs2. I successfully uploaded through ftp 10Go files on the filesystem without problem. I found nothing relevant in etc/security/limits: default: fsize = -1 core = 2097151 cpu = -1 data = 262144 rss = 65536 stack = 65536 nofiles = 20000 ulimit -a core file size (blocks) unlimited data seg size (kbytes) 245759 file size (blocks) unlimited max memory size (kbytes) unlimited open files 2000 pipe size (512 bytes) 64 stack size (kbytes) 32768 cpu time (seconds) unlimited max user processes 2048 virtual memory (kbytes) 278527 The problem does not occur on another AIX 5.3 server, I'm just looking for a different configuration that might be the source of the problem. /etc/security/limits on the server without the problem: default: fsize = -1 core = 2097151 cpu = -1 data = 262144 rss = 65536 stack = 65536 nofiles = 20000 ulimit -a on the server without the problem: core file size (blocks, -c) 1048575 data seg size (kbytes, -d) 131072 file size (blocks, -f) unlimited max memory size (kbytes, -m) 32768 open files (-n) 20000 pipe size (512 bytes, -p) 64 stack size (kbytes, -s) 32768 cpu time (seconds, -t) unlimited max user processes (-u) 262144 virtual memory (kbytes, -v) unlimited

    Read the article

  • How do I install the evaluation version of Windows Server 2012R2 VHD within a Windows Server 2008R2 Hyper-V system?

    - by Paul Hale
    I have a windows server 2008R2 running hyper-v. I have downloaded the Windows Server 2012RC DC Version from here... http://technet.microsoft.com/en-us/evalcenter/dn205286.aspx I am "forced" to install a download app that copy's a .vhd file to my chosen directory. The instructions on this page... http://technet.microsoft.com/library/dn303418.aspx say... To install the VHD Download the VHD file. Start Hyper-V Manager. On the Action menu, select Import Virtual Machine. Navigate to the directory that the virtual machine file was extracted to and select the directory (not the directory where the VHD file is located). Select the Copy the virtual machine option. Confirm that the import was successful by checking Hyper-V Manager. Configure the network adapter for the resulting virtual machine: right-click the virtual machine and select Settings. In the left pane, click Network Adapter. In the menu that appears, select one of the network adapters of the virtualization server, and then click OK. Start the virtual machine. Where it says "Navigate to the directory that the virtual machine file was extracted to and select the directory (not the directory where the VHD file is located). Select the Copy the virtual machine option." Well nothing has been extracted as far as I can tell? and if it has, I have no idea where or what im looking for? I tried creating a new VM and using the downloaded .vhd file but I got an error saying that the .vhd file is an incompatible format. Can anybody help me out please? Thanks, Paul

    Read the article

  • Usage of putty in command line from Hudson

    - by kij
    Hi, I'm trying to use putty in command line from an hudson job. The command is the following one: putty -ssh -2 -P 22 USERNAME@SERVER_ADDR -pw PASS -m command.txt Where 'command.txt' is a shell script to execute in the server through SSH. If i launch this command from the Window command prompt, it works, the shell script is executed on the server machine. If i launch a build of the hudson job configured with this batch command, it doesn't work. The build is running... and running... and running.. without doing anything, and i have to stop it manually. So my question is: Is it possible to launch an external programm (i.e. putty) from an hudson job ? ps: i tried SSH plugin but... not a really good plugin (pre/post build, fail status of the commands launched not caught by hudson, etc.) Thanks in advance for your help. Best regards. kij EDIT: These are the build logs: [workspace] $ cmd /c call C:\WINDOWS\TEMP\hudson7429256014041663539.bat C:\Hudson\jobs\Artifact deployer\workspace>putty -ssh -2 -P 22 USER@SERV_ADD -pw PASS -m com.txt Le build a été annulé Finished: ABORTED And the Hudson.err.log file at the same time (after a stop): 3 juin 2010 18:27:28 hudson.model.Run run INFO: Artifact deployer #6 aborted java.lang.InterruptedException at java.lang.ProcessImpl.waitFor(Native Method) at hudson.Proc$LocalProc.join(Proc.java:179) at hudson.Launcher$ProcStarter.join(Launcher.java:278) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:83) at hudson.tasks.CommandInterpreter.perform(CommandInterpreter.java:58) at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:19) at hudson.model.AbstractBuild$AbstractRunner.perform(AbstractBuild.java:601) at hudson.model.Build$RunnerImpl.build(Build.java:174) at hudson.model.Build$RunnerImpl.doRun(Build.java:138) at hudson.model.AbstractBuild$AbstractRunner.run(AbstractBuild.java:416) at hudson.model.Run.run(Run.java:1241) at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:46) at hudson.model.ResourceController.execute(ResourceController.java:88) at hudson.model.Executor.run(Executor.java:124) My shell script only write "hello" in a "hello.txt" file on the server, and nothing is done.

    Read the article

  • Move an existing RAID 5 array from Ubuntu to Gentoo

    - by Cocoabean
    I have a 64-bit Ubuntu machine with a 4-disk RAID 5 using software raid (md). I've been able to boot an Ubuntu LiveCD and recognize the array with a simple mdadm -A /dev/md0. It was easy to mount after that and nothing had to rebuild. I'm installing Gentoo on this box now (multi-boot, non-RAID root partition) and I have md auto-detect turned on in the kernel. When I boot Gentoo I get: "invalid superblock magic on sdd" for each of the drives in the array. I boot back to Ubuntu and they mount no problem. I tried copying the mdadm.conf that works in Ubuntu to Gentoo, and then ran mdadm -A /dev/md0 but it reports that there is no array named md0. I don't want to lose data (obviously) and I don't want to have to let the RAID rebuild every time I switch between OSes. Any help is appreciated. Both are using mdadm 3.1.4 Both are running 64-bit kernels. mdadm -D /dev/md0 from Ubuntu yields: http://pastebin.com/5gj2QNkV UPDATE: After rebooting I noticed that it still complains about invalid blocks, but cat /proc/mdstat shows an inactive /dev/md127 with the same disks as my raid. I want to mount it but I don't want to get stuck waiting for a rebuild or destroying it inadvertently. mdadm -D /dev/md127 Here is pastebin of mdadm -D /dev/md127 on gentoo: http://pastebin.com/gDCWn0Rn UPDATE II: dmesg output about 'invalid raid superblocks' http://paste.ubuntu.com/885471/ fdisk -l from Ubuntu, /dev/md0 does not have any partitions but I do have it mounted and accessible: http://paste.ubuntu.com/885475/

    Read the article

  • Laptop will not boot

    - by WillumMaguire
    This is a dell studio 1558 laptop. Now, something is wrong with the charger that it won't charge the laptop, but the laptop can turn on and operate properly as long as it is attached. It has been like this for a while, but it's not the problem. My problem is that as of yesterday, It takes several minutes to get past the "dell" startup logo (where is says "f2 setup" and "f12 boot options"). After it gets past, it beeps as normal to tell me about the charger and gives me the f2/f12 options and f1 to continue as normal. I can press f12 to get into boot options and load into my live USB BackTrack 5 ISO, but after "startx" it just stays at a black screen. I can also access BIOS setup, but see nothing that would help the problem. When I boot to the HDD, it gives me this Intel UNDI, PXE-2.1 (build 083) Realktek PCIe GBE Family Controller Series V.2.29 (06/30/09) PXE-E61: Media test failure, check cable PXE-M0F: Exiting PXE ROM Operating System not found Also, pressing f8 gives me the same results as booting as normal. It is running Windows 7 Ultimate, dual-core Intel i3 @ 2.27ghz and 4gb RAM. I think there is an issue with the HDD, as the "Operating System not found" would lead me to believe. Is this a fixable problem?

    Read the article

  • Identifying Httpd error log in Fedora 16

    - by Cerin
    How do you find the cause of httpd errors in Fedora 16? The new systemctl command in Fedora 16 seems to horribly obscure any useful logging info. [root@host ~]# systemctl start httpd.service Job failed. See system logs and 'systemctl status' for details. [root@host ~]# systemctl status httpd.service httpd.service - The Apache HTTP Server (prefork MPM) Loaded: loaded (/lib/systemd/system/httpd.service; enabled) Active: failed since Thu, 21 Jun 2012 16:26:56 -0400; 1min 23s ago Process: 2119 ExecStop=/usr/sbin/httpd $OPTIONS -k stop (code=exited, status=0/SUCCESS) Process: 2215 ExecStart=/usr/sbin/httpd $OPTIONS -k start (code=exited, status=1/FAILURE) Main PID: 1062 (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/httpd.service So the first command fails...and it tells me to run another command...which simply tells me that the command returned an error code. Where's the actual error? Even more frustrating is nothing seems to have been written to the logs: [root@host ~]# ls -lah /var/log/httpd/ total 8.0K drwx------. 2 root root 4.0K Jun 21 16:19 . drwxr-xr-x. 21 root root 4.0K Jun 20 16:33 .. -rw-r----- 1 root root 0 Jun 21 16:19 modsec_audit.log -rw-r----- 1 root root 0 Jun 21 16:19 modsec_debug.log

    Read the article

  • Windows 7 boot failure after update

    - by Jake
    Installed some windows 7 updates today, mostly just optional fixes and it installed an update to my IntelliType or IntelliPoint drivers (Keyboard & Mouse). It asked to reboot, computer gets to the windows load screen and redirects to the repair utility. Repair utility failed, it said if I recently installed a device, unplug it and try to restart. So I unplugged my keyboard and mouse, restarted. Nothing. I noticed that all the errors seemed to be Windows 7 thinking the installation was on another one of my slave drives. For example, my windows installation is on C:, but I have other drives, like G:, X:, etc... So it said "Critical Boot File G:\Windows\system32\drivers\amdxata.sys is corrupt, but why not C:\ ? So I unplugged ALL other hard drives, it still tried loading X:, even though the only one plugged in was C: I have the windows disk, but that didn't seem to help. I was thinking I need to fix my boot.ini or something simple like that was corrupt, the hard drives seem fine. I'm screwed, it's finals week.

    Read the article

  • Windows 7 Loading Very Slow

    - by Adnan
    Hi guys, I've had a problem that only started to occur yesterday. When I boot into Windows 7 and log on to my user account, the computer gets very laggy and slow for at least 5 minutes. Icons take ages to load, and everything is rendered unclickable. This happens for about five minutes after which everything goes back to normal. I tried restarting a few times to see if this is a recurring problem, and it is. I ran a full system scan with Microsoft Security Essentials and found nothing wrong, and I also defragmented the disk to increase performance. However, the problem still exists. Edit: For the past day, I've been trying to install Ubuntu on the same laptop. When installing it on a partition didn't work, I decided to use Wubi. Could this somehow be the problem? Also, my hard drive gets hot a lot, so could the heat be affecting the hard drive and maybe making it defective? Any help on this issue would be greatly, greatly appreciated.

    Read the article

  • With Ubuntu 9.10, my DVD keeps spinning up

    - by Ken
    I have Ubuntu 9.10 on my Intel Mac Mini. When there's a DVD in the drive, and even if there's no program open at all (just looking at the desktop), every minute or so the disc spins up with a loud whirring noise, and I can hear it cranking the motor to seek across the disc. How do I find out what's causing this? And how can I make it stop? Thanks! EDIT: I straced nautilus, and saw nothing it's doing directly, even when the disc spins up. It does poll inotify regularly, but I don't know how to trace what it's watching, or if that's even how it receives disc-inserted notifications. It doesn't call inotify_add_watch when I insert a disc or mount it (or eject or umount), but it could be watching all of /dev already or something like that. Of course, a DVD is mounted read-only, so whether it's inotify or something else, it should never need to poll anything on that. And if it is inotify, it's happening in the kernel, and the kernel should really never need to poll a device it's mounted to check for notifications.

    Read the article

  • BlazeDS first response is VERY SLOW

    - by chibban
    Hi everyone, I have a very strange an annoying problem: I have an appliaction written in Flex 3, with BlazeDS 3.2 and Java in the backend. I'm actually using a portal (liferay) to display portlets that contain Flex movies. When I hit a refresh button on my page, all the Flex movies send a RemoteObject request to the server (using BlazeDS), which should go to java classes and invoke a method (standard BlazeDS usage I 'm guessing). I'm experiencing VERY slow response (14 minutes) on the first hit, while the following hits are much faster. I've enabled the BlazeDS logging (logging level="All") and I also have debug prints coming from my java classes. I also use the "showBusyCursor" attribute for the RemoteObject - so I can see indication of the request being sent from the flex movie. Here is what I see: I hit the refresh button Each movie invokes a RemoteObject request I see a busy sign - in all the movies I see nothing in the log - no BlazeDS prints and no Java prints Wait 14 minutes or so I see BlazeDS prints followed by Java prints I see data populating my flex movies. The really weird thing is that I have the same "application" installed in 4 different computers (on my laptop and in 3 other unix machines), 3 of these installations work well (good response times) and only 1 has the issue I'm describing. I've tried many things, but everything failed. I'd be really happy to get some advice on this. Thanks

    Read the article

  • Two audio streams - headphones and speakers

    - by Sylvester
    What I want (this is probably hard for most to answer, as this is a very unique setup) is to have two different streams (this means audio splitter is not an option, as it will still only be one stream) of audio - one through the headphones and one through the main speakers. I can do the audio rerouting using virtual audio cables, however the problem is this: i cannot get both headphones AND speakers to play even just one stream, let alone two seperate ones. using "split front and back audio into seperate streams is not an option, as the actual MB F_PANEL is faulty (nothing to do with the case front panel, just so you know. that works fine) So, first things first. I need it to recognise the headphones as a seperate audio device so that Virtual Audio Cables will detect it and allow me to route the necessary audio to the headphones only. I also need to be able have sound play through speakers and headphones together what i want to achieve overall, is this: have the ENTIRE computer's sounds picked up by VAC, and stream them to Line1. then have Line1 stream to the headphones. that way whatever's being streamed is heard through the headphones, while the entire system sounds (including those not streamed) are played through speakers.

    Read the article

  • Windows 8 - no internet connetction to some hosts while VPN is active

    - by HTD
    I use VPN to access the servers at work. When VPN is used, all network traffic to the Internet passes through my company network. It worked without any problems on Windows 7, now on Windows 8 some sites suddenly became inaccessible. Please note - I don't try to connect them over RDP, they are public Internet addresses, outside company network. They are inaccessible using any protocol. Ping returns "General failure.". I know it could be a misconfiguration on my company's server side, but it's very strange, since the same VPN connection used on Windows 7 works properly. What's wrong? Is it a Windows 8 bug, or is there something I could do on my company servers to make VPN work as expected with Windows 8? My company network works on Windows Server 2008 R2 and uses Microsoft TMG firewall. I couldn't find any rules blocking the traffic to mentioned sites, all network traffic for VPN users are passed through for all IPs and protocols. Any clues? UDPATE: Important - one whole day it worked. I hibernated and restarted the computer, connected and disconnected VPN - nothing could break my connection. Today it broke again, and restarting Windows didn't help. And now the solution: route add -p 0.0.0.0 MASK 255.255.255.255 192.168.1.1 Oh, OK, I know what it did, added my default gateway to routing table. But it still didn't work sometimes. So I removed my main network gateway route with: route delete -p 0.0.0.0 MASK 0.0.0.0 192.168.0.1 And added modified with: route add -p 0.0.0.0 MASK 255.255.255.255 192.168.0.1 And it works. Now. But I don't trust this. I don't know what really happened.

    Read the article

  • Can't Install msysgit/tortoisegit

    - by Jay
    I ran msysGit-netinstall-1.7.0.2-preview20100407-2.exe.   (http://code.google.com/p/msysgit/downloads/list) Then I ran TortoiseGit-1.4.4.0-64bit.msi.   (http://code.google.com/p/tortoisegit/downloads/list) msysgit was installed in C:\ TortioseGit appears to have been installed in C:\Program Files\TortoiseGit I have: "Git Clone..." "Git Create repository here" "TortoiseGit" in Explorer context menu. When I try to clone, I get "git have not installed" [sic]. I have tried setting the MSysGit path, in the TortioseGit settings, to everything imaginable. Nothing works. Neither C:\Program Files or C:\Program Files (x86) have a Git folder. The git command gives "command not found" from both cmd.exe and bash (that msysgit installed) I don't not see msysgit in - Control Panel - Programs - Program Features, but I do see TortioseGit in there. I would like a procedure for verifying that msysgit is properly installed. A procedure for uninstalling msysgit would be an added bonus. I would like a procedure for getting TortoiseGit to work. I am running Windows 7 on a MacBook Pro.

    Read the article

  • Windows 7 UAC (user access control) is being disabled on every reboot

    - by Christian Thamer
    To put it simply, I noticed UAC was disabled so I enabled it. I was prompted to reboot the computer for the changes to take effect. Upon my reboot I checked the settings again as I hadn't disabled UAC in the first place. It was again set to off (never notify). For the heck of it I repeated the process a couple of more times. Same result each time. I have Microsoft Security Essentials running a full scan nightly so I should be protected from viruses. I also did an on demand scan with the online tool at www.antivirus.com. Nothing was found. Other than the fact that UAC is being disabled on each reboot I have no other reason to suspect a virus. So my question is does anyone have insight into if this is a possible problem with a virus or other malware changing my UAC settings on each boot or is it possibly a problem with Windows and UAC itself? If it is malware are there suggestions for other products outside of the ones I have used to detect and remove it.

    Read the article

  • OpenLDAP Authentication UID vs CN issues

    - by user145457
    I'm having trouble authenticating services using uid for authentication, which I thought was the standard method for authentication on the user. So basically, my users are added in ldap like this: # jsmith, Users, example.com dn: uid=jsmith,ou=Users,dc=example,dc=com uidNumber: 10003 loginShell: /bin/bash sn: Smith mail: [email protected] homeDirectory: /home/jsmith displayName: John Smith givenName: John uid: jsmith gecos: John Smith gidNumber: 10000 cn: John Smith title: System Administrator But when I try to authenticate using typical webapps or services like this: jsmith password I get: ldapsearch -x -h ldap.example.com -D "cn=jsmith,ou=Users,dc=example,dc=com" -W -b "dc=example,dc=com" Enter LDAP Password: ldap_bind: Invalid credentials (49) But if I use: ldapsearch -x -h ldap.example.com -D "uid=jsmith,ou=Users,dc=example,dc=com" -W -b "dc=example,dc=com" It works. HOWEVER...most webapps and authentication methods seem to use another method. So on a webapp I'm using, unless I specify the user as: uid=smith,ou=users,dc=example,dc=com Nothing works. In the webapp I just need users to put: jsmith in the user field. Keep in mind my ldap is using the "new" cn=config method of storing settings. So if someone has an obvious ldif I'm missing please provide. Let me know if you need further info. This is openldap on ubuntu 12.04. Thanks, Dave

    Read the article

  • My email server is being blocked by Yahoo: TS03 Message permanently deferred.

    - by bilygates
    Hello, My mail server has been getting the following error from Yahoo's mail servers since about a month: postfix/smtp[23791]: host g.mx.mail.yahoo.com[98.137.54.238] refused to talk to me: 421 4.7.1 [TS03] All messages from [my ip] will be permanently deferred; Retrying will NOT succeed. See http:// postmaster.yahoo.com/421-ts03.html I have exchanged about 4 emails with Yahoo's support team. The first three seemed like automated messages, and the 4th told me that there is nothing they can do, but if I change my policies I can send them another email in 6 months. They also told me: However, based on the information you have provided us, we cannot systematically deliver your email to the Inbox at this time. We suggest that you ask your users to set up a filter in Yahoo! Mail to ensure that they get your email messages in their Inbox. The problem is that my email doesn't even get to their Spam folder. The server won't allow any connections. I have never sent spam messages, not even newsletters. I only send emails for my new users so they can activate their account. I've also implemented DKIM and told Yahoo about this. I have checked my configuration with http://www.myiptest.com/staticpages/index.php/DomainKeys-DKIM-SPF-Validator-test and it reports that both SPF and DKIM are set up correctly. What should I do? Basically, I'm losing new users every day. Any help will be appreciated. P.S.: I apologize if this particular question has already been asked. I searched for it but didn't find it.

    Read the article

  • VPN Error 691 but server says authenticated on server

    - by Andy
    Hello all, I have a problem with a vpn connection on Windows XP SP3 that appears to be related to an account (maybe privilleges or an option that I have missed). When connecting using my account, which is a domain administrator account it will connect to through the vpn fine. However, using an account created for another person they receive Error 691: Username or Password is not valid for this domain. On the domain controller (windows 2003) I see a logon successful message: User DOMAIN\user was granted access. Fully-Qualified-User-Name = int.company.net.au/People/Management/User NAS-IP-Address = 10.30.0.3 NAS-Identifier = not present Client-Friendly-Name = MelbourneCore Client-IP-Address = Router-ip Calling-Station-Identifier = not present NAS-Port-Type = Virtual NAS-Port = 77 Proxy-Policy-Name = Use Windows authentication for all users Authentication-Provider = Windows Authentication-Server = undetermined Policy-Name = Remote VPN Access Authentication-Type = MS-CHAPv1 EAP-Type = Does anyone have any ideas as to where else I should look for finding a solution? If i use the wrong password it gives a logon failure error in the event viewer. Also removing them from the remote access group gives a logon failure error. Nothing appears in the event viewer on the local machine. In the past all that is required is to add them into our Remote Access Users group. Any help?

    Read the article

  • Cisco 7206 error trying to copy running-config (Bad file number)

    - by jasondewitt
    I have a cisco 7206 that terminates a bunch of pppoa sessions for dsl users. Today I noticed that if I tried to "show run" nothing happened. I mean that it doesn't show anything and just sends me right back to the command prompt. I decided I should probably try and back up the config and that is where I'm stuck. Any time I try to copy the running-config to tftp or to pcmcia card that I know is not full I get the following error: %Error opening system:/running-config (Bad file number) I get this error when I try to do anything with the running config. I've been googling around, but I haven't found any thing else that talks about this error. I've seen people say to erase the nvram and then try to "copy run start", but I don't want to erase the nvram until I can pull off a copy of the running-config. I would try to reboot it, but the startup-config that is on the nvram looks to be woefully out of date (good job me!). Any ideas what might be wrong? or how I can get the running config off the router?

    Read the article

  • IIS 7.0 404 Custom Error Page and web.config

    - by Colin
    I am having trouble with a custom 404 error page. I have a domain running a .NET proj with it's own error handling. I have a web.config running for the domain which contains: <customErrors mode="RemoteOnly"> <error statusCode="500" redirect="/Error"/> <error statusCode="404" redirect="/404"/> </customErrors> On a sub dir of that domain I am ignoring all routes there by doing routes.IgnoreRoute("Assets/{*pathInfo}"); in the .NET proj and I want to put a custom 404 error page on that and any sub dir's of Assets. The sub dir contains static content like images, css, js etc etc. So in the Error Pages section of IIS I put a redirect to an absolute URL. The web.config for that dir looks like the following: <system.webServer> <httpErrors> <remove statusCode="404" subStatusCode="-1" /> <error statusCode="404" prefixLanguageFilePath="" path="http://mydomain.com/404" responseMode="Redirect" /> </httpErrors> </system.webServer> But I navigate to an unknown URL under that dir and yet I still see the default IIS 404 page. I am also seeing an alert in IIS that reads: You have configured detailed error messages to be returned for both local and remote requests. When this option is selected, custom error configuration is not used. Does this have anything to do with the customErrors mode="RemoteOnly" in the site web.config? I have tried to overwrite the customErrors in the sub dir web.config but nothing changes. Any help would be appreciated. Thanks.

    Read the article

< Previous Page | 435 436 437 438 439 440 441 442 443 444 445 446  | Next Page >