Search Results

Search found 13388 results on 536 pages for 'professional experience'.

Page 439/536 | < Previous Page | 435 436 437 438 439 440 441 442 443 444 445 446  | Next Page >

• Dropbox picture sync: Skip RAW files?

  - by Steven Lu

  I like the convenience of having Dropbox keep track of my photos because it tends to work with my devices over 3G (I am often tethering to my phone with my iPad and Macbook) as well as Wifi, but it's a waste of network traffic to sync the raw files from my camera or memory card. It clutters up the dropbox list and the files are just huge. Is there a way to configure the Dropbox client so that it ignores a certain file extension for the picture sync? Also, I suspect that if I just go and delete the raw files, that the next time I plug in the memory card and tell Dropbox to sync, it will re-download the raw files. Which would be terribad. I could switch to iCloud for Photo Stream, I suppose, but there will be no access via 3G that way. And I've already got years of experience with Dropbox so I know it's going to just work. I think any method that works for filtering files to exclude from sync on Dropbox in general should work here too. Edit: Wow there are 19k votes for this exact request.

  Read the article

• What hardware would I need (approx) to run ESXi server?

  - by mr.b

  Hi, I am considering to purchase off-the-shelf commodity hardware in order to build server that will host virtual machines using ESXi server. Intended purpose for this server is NOT mission critical tasks. It will have to run perhaps 20-50 Windows XP/Vista/7 virtual machines (in total, but closer to 20 figure). Each guest would have to have 1-2 GB of ram, and probably two-three times more disk space than guest OS needs with clean install and all updates applied (that would be around 6-8 GB for XP, and i believe closer to 10-15 for win7). Those guests will act as a test ground for a new product that is network management software, thus guests will idle most of their time once initially loaded, but if I give them some task to complete, they should be able to perform reasonably well. Now, from what I have learned... CPU is usually not much of an issue (6 cores would do it), memory should not be lacking, but doesn't have to be sum of all guests, because of overcommitment... That leads me to IO, which is, as it seems, the bottleneck. Since I have very little experience with ESXi (and ESX, too) server, I'd like to ask: How much memory could I save by overcommitment, and how does it affect performance? Is 6-core cpu enough to run above described system? Would it be possible to run entire server off two (or even one) SSD drives (to host system virtual disks, with few additional HDDs (2-3) in RAID 0 to be used as secondary storage? I read somewhere that ESXi allows having something like "master image", essentially virtual machine that is "deployed" many times, so that disk space can be saved by having only differences stored by specific guests, instead of copying around whole virtual disks. Is this true, and how can this help me? Are there any other things I need to take into consideration when building this off-the-shelf solution? I should probably mention here that I'm fully aware of issues like SPOF regarding power supply, raid 0, etc, but since it's only a testing ground and not a production system, it's not so important for me. Thanks, B.

  Read the article

• What sound cards are there besides Creative's that offer benefits for gaming?

  - by Vilx-

  Many years (6? 7?) ago I bought an Audigy sound card to replace the onboard sound and was astonished at the improvement in games. It was a completely different sound, the whole experience became way more immersive. As the time has passed however the card has become old. The support for the latest Windows versions is declining and newer technologies have definitely been developed. So I was starting to wonder - what newer hardware exists? Sure, there is the Sound Blaster X-Fi, but that's quite expensive and I'm not entirely thrilled by past policies of Creative either (like the whole affair with Daniel_K). But are there any alternatives? EAX is a patent by Creative, so it's doubtful that any other manufacturer has implemented it. And I haven't heard of any competing standards either. To clarify, what I would like is something like a "sound accelerator". A sound card that would offload sound processing from my CPU while at the same time giving astounding effects that would be impractical to do on CPU in the first place. I'm not interested in absurd sampling rates (for the most time I can't tell MP3 and a CD apart) or uncountable channels (I'm using stereo headphones). But I am interested in special effects in games. Are there any alternatives or is Creative a monopoly in this market?

  Read the article

• Remote Desktop Services Licensing - Does server have to have a RDS role?

  - by transistor1

  I recently set up a "micro" size Windows 2008 Datacenter server on Amazon AWS. My small group needs several concurrent RDS users to be able to access the machine. Without installing the "Remote Desktop Server" role, it allows 2 concurrent connections. I read on MS' website that in order to set up multiple users, we needed to install the RDS role. I did so, but now the application we are trying to share is running much slower than it was before. Prior to the role installation, it was taking about 5 seconds to open; now it is taking a few minutes to open -- without any other users logged on except me. My assumption is that the RDS role may be too much for this micro instance to handle, and currently, changing to another size instance is not an option (it may be possible later if we were to receive enough funding). This leads me to the following questions: 1) Is it a sensible assessment to assume that it is the RDS role is slowing things down, or are there other things that I could look at to speed it up? We are talking about a machine with ~600MB of memory. 2) If I revert back to the pre-RDS role, is there any legitimate way (in terms of purchasing RDS licenses) to get more than 2 concurrent desktops? I did read this, and am not questioning that the answerer is knowlegeable; but someone else may have some other experience. I am also making it clear that we want to do this in a legitimate way. Thanks in advance for any assistance that can be provided! EDIT: if it is helpful in answering the question, the application in question is a Lotus Approach database. Also, I am asking this from a technical perspective: not a legal one. I want to know if it is possible to install valid licenses without the RDS role.

  Read the article

• How large is the performance loss for a 64-bit VirtualBox guest running on a 32-bit host?

  - by IllvilJa

  I have a 64-bit Virtualbox guest running Gentoo Linux (amd64) and it is currently hosted on a 32-bit Gentoo laptop. I've noticed that the performance of the VM is very slow compared to the performance of the 32-bit host itself. Also when I compare with another 32-bit Linux VM running on the same host, performance is significantly less on the 64-bit VM. I know that running a 64-bit VM on a 32-bit host does incur some performance penalties for the VM, but does anyone have any deeper knowledge of how large a penalty one might expect in this scenario, roughly speaking? Is a 10% slowdown something to expect, or should it be a slowdown in the 90% range (running at 1/10 the normal speed)? Or to phrase it in another way: would it be reasonable to expect that the performance improvement for the 64-bit VM increases so much that it is worth reinstalling the host machine to run 64-bit Gentoo instead? I'm currently seriously considering that upgrade, but am curious about other peoples experience of the current scenario. I am aware that the host OS will require more RAM when running in 64-bit, but that's OK for me. Also, I do know that one usually don't run a 64-bit VM on a 32-bit server (I'm surprised I even got the VM started in the first place) but things turned out that way when I tried to future proof the VM I was setting up and decided to make it 64-bit anyway.

  Read the article

• lighttpd on Fedora permission issues

  - by Isaac Gateno

  I'm trying to get started with lighttpd on Fedora 16 to run a RESTful api for development. Right now even with the most basic sample config file I'm getting 404 pages when I know the pages I'm pointing at exist. From reading other questions I'm leaning towards this being a permissions issue, but I'm confused about how lighttpd runs on Fedora. There's a user called "lighttpd" not "www-data"? I can't see this user in the system-config-users tool and I can't su into it to check which permissions it has. I'm trying to point lighttpd to "/var/www/lighttpd" which has some example pages in it. The permissions for the files inside are set to -rw-r--r-- and the permissions for the folder containing them are drwxr-xr-x. Doesn't that mean that any user can view these files? I'm not sure what else I should be checking as I don't have much experience with server configuration. Any help would be appreciated. Edit: I was following the tutorial configuration here so the lighttpd.conf file contains server.document-root = "/var/www/lighttpd/" server.port = 3000 mimetype.assign = ( ".html" => "text/html", ".txt" => "text/plain", ".jpg" => "image/jpeg", ".png" => "image/png" ) and I was just trying to get the basic example page working.

  Read the article

• Painless deployment of a Django app (port from Drupal). Do I have to switch to a VPS?

  - by Monden

  I'm about to complete porting my Drupal based community site to Django. My Drupal site is hosted at a shared hosting (Dreamhost) for last 4 years, and stability & performance has been satisfactory. The site gets around 5k unique visitors with 70-80k page views a day. This will be my first deployment of a Django application and I'm not comfortable with managing my own VPS. I use Ubuntu as a dev. server, but I don't have experience with it at the production env. I have an unrelated internal CRM app (Django) that I host with Webfaction. However security and performance isn't an issue as it's only accessed by 5 people. Unfortunately, I don't have much time to learn and maintain a VPS at this moment. I would like to know if I can host a site with this much traffic at Webfaction's shared environment? How would performance differ in comparison to Linode or Slicehost? Google AppEngine isn't an option at the moment as I'll be using my current Postgresql database.

  Read the article

• Windows XP usb drivers reinstalling upon reboot

  - by iWerner

  We have a Windows XP SP3 laptop (Acer Travelmate 7320) to which we connect a variety of astronomy equipment (a telescope, its mount, some cameras and others) all of which connect through USB. When we plug in these devices, Windows tells us that it detects the hardware and installs the driver. All of these devices then function correctly using the software that came from the vendor (unfortunately, one of the vendors does not support Vista 64, and that is why we're using our XP laptop). However when we reboot the computer we experience a variety of symptoms: Windows reports that it found new hardware for some of the devices and tries to reinstall their drivers, and for some of the other devices needs to be unplugged and plugged in again before they are detected again by the operating system, in which case Windows still tries to reinstall their drivers. It is as if Windows does not remember that it has already installed the drivers. Is this a common problem on Windows XP? If so, what can be done about it? Should we rather be looking at the laptop's firmware and drivers? We've looked into updating the drivers for the chipset, but this did not solve the problem. Thank you in advance.

  Read the article

• Figuring out which PC part is faulty

  - by Davy8

  I have an odd scenario and I'm having trouble figuring out which is the faulty component. First of all, the video doesn't work, monitor says it's not getting a signal. Monitor's not faulty (works on other computer) so the first suspect was video card. However 2 things make me think it's not the video card. (Don't have another machine with PCIe around to test definitively) First, the GPU fan is spinning so it's getting power. Second, tried putting in an older PCI video card that is known to be working (pulled out of another working machine) and there's still no video. Normally if it's not the video card I'd suspect the motherboard, but everything's getting power on the mobo, so I'm not sure. The case apparently doesn't have system speakers, so can't hear any of the diagnostic beeps either. Also not sure whether a faulty CPU would cause no image at all either. The parts are brand new so something's going to get RMA'd but I'm not sure which component is to blame in this case. (Only slightly related, but I also accidentally put too much thermal paste on the CPU. The fan/heatsink instructions said to put the whole tube which seemed like a lot compared to previous experience, and as I started squeezing I knew it was definitely too much and stopped at about 1/3 but against my better judgement I didn't wipe any off. I'm not sure whether that would cause problems other than not cooling as effectively as it should)

  Read the article

• Website hosted on my virtualbox web server not displaying images or applying css when viewed through phone

  - by WebweaverD

  I would really appreciate it if someone could help me. Please let me know if you need more info in the comments. My Set Up I have a windows 7 pc. On it I run a virtual box VM with a ubuntu 12 guest os and LAMP setup. I share files between the two machines using samba from linux to windows and using windows file sharing (Workgroup) the other way round. The vm is set up with a bridged network adapter and can happily serve web pages to my host machine. I use DHCP reservations on my home wireless router/modem to reserve an ip for the vm and give it a sitename.dev in my windows host file so I can access it at sitename.dev through the browser. The Problem So far so good but I have a dev project which needs a lot of mobile template development, now obviously I can use a browser plugin to simulate a mobile device but I would like to be able to see the real thing easily on my phone during development. So ideally I would like a similar setup on my iphone to my windows setup Now I'm not great on networking and dont have much experience with web server set up. So when I typed the ip of my virtual box into my iphone i wasnt expecting to see anything. I was pleasantly surprised when my site loaded up. The javascript even seems to be running but the images and css are not happening. My Question 1) What is happening here, is it something to do with the bridged set up on the vm network? 2)How do I make the sites load properly through my phone Notes I've also tried another phone. The same sites viewed on live servers work fine.

  Read the article

• NVidia TwinView - slow rendering on dual desktop [closed]

  - by lisak

  Hey, does anybody have experience with it ? I've set it up 4 times on 4 different machines. And there was always problems with slow rendering ( for instance : scrolling pages in browser is not fluent). But there always was something that finally made it work perfectly... I remember that one time this option helped, but not now Option "RenderAccel" "1" Nvidia geforce 8400GS or Zotac geforce 9500GT Monitors connected via dvi and hdmi connectors proper nvidia driver installed Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "0" EndSection Section "Files" ModulePath "/usr/lib64/xorg/modules" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/OTF" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi" FontPath "/usr/share/fonts/cyrillic" EndSection Section "Module" Load "dri2" Load "glx" Load "extmod" Load "record" Load "dbe" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Acer AL1715" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 75.0 EndSection Section "Device" Identifier "Nvidia" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "MSI big bang-fuzion" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8400 GS" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "RenderAccel" "1" Option "AllowGLXWithComposite" "1" Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "CRT: 1280x1024 +1920+0, DFP: 1920x1080 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• What are the replacement options for an IDE hd for a DOS based system?

  - by dummzeuch

  I have got a few "embedded" systems running MSDOS 6.2 which boot from and store data to IDE hard disks. Since these drives are nearing their end of life, the question arises how we can replace them. The requirements are: DOS must be able to install and boot from these drives. They must be able to sustain heavy (mostly) write access. If possible, they should be able to survive moderate vibrations (not too bad since the current hds have survived several years of that) I considered the following options so far: other ide hard drives: Unfortunately modern IDE drives are too large so DOS cannot boot from them even if I create small partitions. Older IDE drives are just that: old, so they are probably not the most reliable ones any more. SSDs: There are a few SSDs with IDE interface available. I have not yet tried them. Does anybody have any experience with them? They look like the ideal replacement provided that DOS can boot from them and that writing speed does not deteriorate too much (the old hds are no race cars either). Compact Flash: There are adapters for using CF with IDE controllers and they work fine. DOS can boot from them and they have no problems at all with vibrations. What I am not sure about is their durability. DOS uses FAT so some very few sectors are written every time the medium is being written to. IDE to SATA converters: I have no idea whether they are any good. Has anybody tried them? It might be an option to use one of these to connect an SATA SSD to the system. Are there any alternatives that I have missed? (We are working on replacing these systems, but it will still take a few years.)

  Read the article

• What can inexperienced admin expect after server setup completed seemingly fine? [closed]

  - by Miloshio

  Inexperienced person seems to have done everything fine so far. This is his very first time that he is the only one in charge for LAMP server. He has installed OS, network, Apache, PHP, MySQL, Proftpd, MTA & MDA software, configured VirtualHosts properly (facts because he calls himself admin), done user management and various configuration settings with respect to security recommendations and... everything is fine for now... For now. If you were directing horror movie for server admin above mentioned what would you make up for boogieman that showed up and started to pursue him? Omitting hardware disaster cases for which one cannot do anything 'from remote', what is the most common causes of server or part-of-server or server-related significant failure when managed by inexperienced admin? I have in mind something that is newbie admins very often missing which is leading to later intervention of someone with experience? May that be some uncontrolled CPU-eating leftover process, memory-related glitch, widely-used feature that messes up something unexpected on anything like that? Newbie admin for now only monitors disk-space and RAM usage, and number of running processes. He would appreciate any tips regarding what's probably going to happen to his server over time.

  Read the article

• sql server 2005 instance unresponsive and all db's are 'in recovery'

  - by user44650

  we've got a sql server 2005 instance that one of our guys messed up, i believe they killed the sql server service and restarted the computer, and when it came back all of our databases are "in recovery" and it times out every time we try to connect to it. it's been 'in recovery'and unable to connect to 'msbd' (also in recovery) whenever we try to use SSMC, for the last 4 days now. i'm unsure how to use the DBCC CHECKDB command to check the db integrity. we have backups(which we can't recover from because it keeps timing out), and it's a testing server, so nothing in production is really lost. is there any way to get it out of recovery mode? we have another sqlserver instance running that's just fine, but this instance keeps timing out. the errors i keep seeing are database msdb is being recovered. wait until recovery is finished and an exception occurred while executing a transact-sql statement or batch Timeout expired. any thoughts? we don't really have a DBA here, or anyone with much sql experience.

  Read the article

• What is the typical maximum number of database connections for Oracle running on Windows server ?

  - by Sake

  We are maintaining a database server that serve a large number of clients. Each client typically running serveral client-applications. The total number of connections to the database server (Oracle 9i) is reaching 800 connections on peak load. The windows 2003 server is starting to run out of memory. We are now planning to move to 64bit Windows in order to gain higher memory capability. As a developer I suggest moving to multi-tier architecture with conneciton pooling, which I believe is a natural solution to this problem. However, in order to support my idea, I want the information on: what exactly is the typical number of connections allowed for Oracle database ? What is the problem when the number connections is too high ? Too much memory comsumption ? or too many sockets opened ? or too many context switching between threads ? To be a little bit specific, how could Oracle Forms application scale to thousand of users without facing this problem ? Shall Oracle RAC applied to this case ? I'm sure the answer to this question should depend on quite a number of factors, like the exact spec of the hardware being used. I'm expecting a rough estimation or some experience from the real world.

  Read the article

• What switch should we use for PCoIP?

  - by Jay R.

  We have a small lab space that seats 10 people and has 20 machines. Each machine is set to 1920x1200 resolution because the user apps are best used at that resolution. Currently the machines are all located close enough to montors that a DisplayPort cable will reach, but the pending lab remodel positions them around 80 feet or more away in racks. Our proposed solution is to use PCoIP. We purchased 10 PCoIP portals and 20 PCoIP host cards. We plan to set up a dedicated network to handle just the PCoIP traffic. After testing just one portal and one host card with a cheap 1G switch from a local office supply store, we were left with less than good impressions about the usefulness in our lab. The framerates were not spectacular and the mouse seemed jerky. Our concern is that we can't get away with the cheap 1G stuff from the store because adding more machines to the switch will just make the user experience worse. What switch would be recommended to best support our PCoIP situation? We will need to plug in at least 30 cables based on just those machines. Is there a particular feature to search for that makes a difference? Is there a switch that works best with PCoIP? Added Info: The reporting webapp for the host card shows maximum bandwidth usage to be 220000 kbps. The average appears to be around 180000 kbps. The reverse direction is much lower, like 15000 kbps.

  Read the article

• linux: per-process monitor, every 10 minutes, with history access

  - by Inbar Rose

  I really didn't know a better way to ask my question, hence you get a horribly named question. I will explain what i want to do, maybe that will help you help me. I would like to have my linux machine continuously monitor (every 10 minutes) all the processes on my machine. The information from each process that I require is the name, CPU usage, allocated (virtual) memory, and resident (ram) memory. If these periodic reports were to be looked at, they would look something like this: PROCESS CPU RAM VIRTUAL name1 % MB MB name2 % MB MB ...etc..etc These reports should be stored in such a way that I can access them at a later date by giving a date/time scope (range). For instance, if I want to see the history of my processes from 12:00:00 1.12.12 till 12:00:00 2.12.12 I can - and it should give me the history of the processes for every 10 minutes between those date/time borders. The format of the return is not important, that will be handled by a script anyway and can be modified into anything I need. I have looked into a few things so far, but have not found something that clearly meets my needs. Among the things i searched: sar, free(1), top(1).. and a few other things. It should be a simple issue, i can already see all this information by simply looking at my htop, but i need only a tool that will gather the desired fields for me for each processes every 10 minutes, and then also let me extract slices of that data based on date/time scopes (ranges). note: I have limited experience with linux, so please give detailed information. note2: The desired output will be something like this (after receiving the desired range) CPU USAGE BY PROCESS: proc_nameA 1,2,2,2,2,2...... numbers represent % usage every 10 minutes... proc_nameB 4,3,3,6,1,2...... The same idea with the other information.

  Read the article

• Windows 7: Dual Monitor Issue

  - by sdoca

  I have a Dell laptop with a docking station and two external monitors hooked up. I'm running Windows 7 64 bit. Originally, the two monitors were the same - Dell 1908FP. I have replaced one of them with an HP LA2405. I have set the HP 24" (1920 x 1200 connected via DVI port) as montior 1 and extended to use the Dell 19" (12080 x 1024 connected via VGA port) as monitor 2. I have set my power plan so that when the laptop is plugged in, it will turn the monitors off after 10 minutes, but it will not put my laptop to sleep. However, now that I have the HP monitor, when I unlock my laptop and the monitors come back on, all my windows are resized and shifted to the top left corner of the HP monitor as if they had been resized for display on the smaller Dell monitor. A co-worker has the exact same laptop and monitor configuration but doesn't experience this issue, so I figure there's some configuration that's different but we can't find it. I haven't been able to find any mention of a similar problem doing an internet search, but I'm not really sure what terms to use in my search. Anybody have any suggestions as to what may be causing the issue? OS setting? Monitor setting? EDIT: My laptop is using the Intel Graphics and Media Control Panel/drivers.

  Read the article

• Advice for UPC/Surge Protector in home office

  - by Fred

  I'm just starting out as an independant developer, mostly Unix stuff with some Windows thrown in occasionally. I've been running two machines, a linux and a windows dev machine. Long story short, we had a bad storm come through last week and I unplugged one machine, forgot to unplug the other and the p/s and mobo ended up dead. Luckily I backup to an external service religiously (rsync.net for anyone interested), so there was no loss in data, but it did show me a glaring hole in my current setup, namely, lack of UPC and Surge Protection (this has honestly never been an issue before). Can anyone recommend a UPC/Surge Protector for a home office? It only needs to support a single machine (I opted to use vmware instead of rebuilding that machine), but it's a quad core Phenom 2 with a 1k watt p/s. This is outside my experience so I thought I'd get some input from others. I'm looking for something that's reasonably priced and does the job reasonably well. I don't need absolute 100% uptime, just something to protect my PC better than it is now.

  Read the article

• Windows xp blinking under score after bios

  - by heyjoe

  so this is for an older pc I have to repair for a friend. The pc has an hdd of about 60 something gb, It uses win xp and let's say 60-70% of the boots it hangs on showing only an underscore bilking line after bios screen, rest of the times it boots fine or the computer shuts down on xp loading screen. Sometimes if you let it alone while the underscore is blinking, it will boot after a while, like a few minutes, some times it won't boot at all even if you give him more time, like one hour. When it boots successfully the pc seems to work fine. I think it's a bad hard disk and i'm about to suggest buying a new one and switching it but I don't have enough experience and i would hate making him buy a new hdd and not solving the problem. anyone has any tips? I know there are other topics about blinking underscores or cursors while xp is booting but the issues about the pc shutting itself down or sometimes booting really freaks me out. Can't format everything and re install until about 10 days from now, cause the dude has some program for his business on this pc and I have to migrate it when the next computer arrives, however he needs to use it until then. so please advise, thx.

  Read the article

• How do I get Tomcat 7 to start up faster in Linux CentOS kernel version 2.6.18?

  - by user1786833

  I am experiencing a problem with slow start up times for Tomcat 7. I have done some testing by tweaking configuration parameters both on Linux CentOS kernel version 2.6.18 and on Windows 7 using this link as my primary guide: http://wiki.apache.org/tomcat/HowTo/FasterStartUp and managed only a modest improvement. The improvements seemed to result when I added metadata-complete="true" attribute to the element of my WEB-INF/web.xml file and when I added the names of almost all the jars we use for our application to the tomcat.util.scan.DefaultJarScanner.jarsToSkip property in conf/catalina.properties file. I've also used this JAVA_OPTS in the setenv.sh file: JAVA_OPTS="$JAVA_OPTS -server -Xms1536m -Xmx1536m -XX:MaxPermSize=256m -XX:NewRatio=2 -XX:+UseParallelGC -XX:ParallelGCThreads=2 -Dsun.rmi.dgc.client.gcInterval=1800000 -Dsun.rmi.dgc.server.gcInterval=1800000 -Dorg.apache.jasper.runtime.BodyContentImpl.LIMIT_BUFFER=true " but actually saw my start up times increase slightly. Our QA and production environments are on Linux CentOS so I'm hoping to get more information on improving Tomcat 7 start up times in that environment. My primary role is java developer and I don't have much system administration experience so I appreciate any input. Thank you for your time and suggestions.

  Read the article

• Physical Debian to VMWare: vmware-converter, dd-image or otherwise?

  - by Dabu

  we have two debian Lenny production machines, both running larger commercial websites. Now these machines need to be moved, and in the process, they need to be virtualized to VMWare ESX. If you believe the internet information, there are several ways to accomplish this. The easiest for us would be to use our weekly dd backup where the whole disk, however, I have no experience with this kind of technology and if it is really possible. The second best way would be via an application on the source machine virtualizing it and generating an ESX compatible VM. However, the software is beta and unsupported, and after installation, nothing really works (the /etc/init.d/vmware-converter script doesn't actually do anything, start and stop reply with success messages, yet ps shows that there are no new processes). The worst way with the most work would be to install a new machine and set it up manually, copying files and databases as needed. This part is clear in it's execution, and my question(s) do not touch this. Is my 1st way possible? Has anyone done this yet, or better, has a page with instructions? Or is there a help page that explains how to correctly install, run and use the vmware-converter tool using a Debian installation (it's possible that I dod something wrong during installation already)? Thank you.

  Read the article

• auth user and exec a node app only with apache?

  - by Blame

  I couldn't find an answer on the web and I'm trying for days now so I hope that someone with more experience with apache can help me out. Iam writing an web editor and the user should be able to edit a file that is on the server in a directory the user has access to. The problem Iam facing is that I need to authenticate against the system users (shadow/passwd). So the user should be able to login whith a system account and then the node app which does all the logic should be started with the users rights. I hope to get this working without any additional script and only with Apache. I found out two things: I can use mod_auth_pam to authenticate the user There is a mod called suEXEC which can exec the node app with a specified user The problem is that I have to hard code which user is used by suEXEC but I want to decide when the user logs in. Is there any way to authenticate a user against the shadow/passwd and then exec a prog with the users rights? I dont want to run the node app as root and the user should only be able to access his own files. Any help would be appreciated! Thanks, Kodak

  Read the article

• How do I connect to and factory reset a Catalyst 3560 Switch?

  - by Josh

  My company just bought another company. In their server room they had some older hardware, which I would like to repurpose. One of these is a Cisco Switch: C3560G-48TS-S. I found some instructions about this switch here but this is not a guide for a beginner. I have no idea how to connect to this thing to begin running the commands. It says Configure the PC terminal emulation software for 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control. But I can't find anything on how to do this (assuming with telnet?) or even what program to use. I also don't know how to find the IP address of the device to connect to it. My research also says once I get in there, I need to run clear config all Is this the right command? Also, what if I can't get the username and password for these devices? Is there some way to factory reset (my only experience is with devices that have a hardware reset button) EDIT: I should note that when I push the button on the front the three lights blink, which according to the documentation indicated the switch is configured and "not available for express setup"

  Read the article

• How to verify that a physical volume is encrypted? (Ubuntu 10.04 w/ LUKS)

  - by Bob B.

  I am very new to LUKS. During installation, I tried to set up an encrypted physical volume so that everything underneath it would be encrypted. I chose "Use as: physical volume for encryption," the installation completed and I have a working environment. How can I verify that the PV is indeed encrypted? I was never prompted to provide a passphrase, so I most likely missed a step somewhere. At the end of the day, I'd like whole disk encryption if that's possible, so I don't have to worry about which parts of the file system are encrypted and which aren't. If I did miss something, do I have to start over and try again, or can it be done (relatively easily?) after the fact? I would prefer not to introduce more complexity by using TrueCrypt, etc. Environment details: The drives are md raid1. One volume group. A standard boot lv. An encrypted swap lv using a random key (which seems to be working fine). Thank you in advance for your help. This is very much a learn-as-I-go experience.

  Read the article

< Previous Page | 435 436 437 438 439 440 441 442 443 444 445 446  | Next Page >