Search Results

Search found 13904 results on 557 pages for 'host on demand'.

Page 440/557 | < Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >

  • Port forwarding + shared connection with Ubuntu

    - by Joey Adams
    Because my wireless router's ethernet ports are defective, I set up a shared wireless connection from my laptop (which has wifi) to my eMac (which does not) via a crossover ethernet cable. The laptop is behind a router as 192.168.1.131, and the eMac is behind the laptop as 10.42.43.1 . The laptop is running Ubuntu 9.10 (Karmic). I achieved the shared connection through NetworkManager Applet. I right-clicked on the network icon at the topright, went to Edit Connections, selected the Wired connection named "Auto eth0", clicked "Edit...", went to the "IPv4 Settings" tab, and selected the Method "Shared to other computers". The eMac can now access the Internet. Now I want to enable port forwarding. There's a game I want to play that needs port 6112 forwarded (both TCP and UDP) in order to host games. I set up the router to enable port forwarding for 192.168.1.131 (the laptop), but port forwarding still isn't available on the eMac. I suppose I need to pretend my laptop is a router and configure port forwarding on it, indicating that incoming connections to the laptop (192.168.1.131) should be forwarded to the eMac on the shared connection (10.42.43.1 ). Thus, packets coming into the router on port 6112 would be redirected to the laptop (by the router), then to the eMac (by the laptop). My question is, how would I do that on Ubuntu (in light of NetworkManager's presence)? Also, if I can't get this to work, does anyone mind hosting a comp stomp? :D

    Read the article

  • strange Postfix logwatch log summary on my ubuntu vps

    - by DannyRe
    Hi I would be very thankful if someone could help me on explaining this logwatch summary of my postfix installation on my ubuntu 10.04 vps. I dont really know if this might be a normal log file because of the many authentication failed entries and foreign IP addresses. Any advise for a novice? Thx! ****** Summary ************************************************************************************* 113 SASL authentication failed 195 Miscellaneous warnings 8.419K Bytes accepted 8,621 8.419K Bytes delivered 8,621 ======== ================================================== 3 Accepted 60.00% 2 Rejected 40.00% -------- -------------------------------------------------- 5 Total 100.00% ======== ================================================== 2 5xx Reject relay denied 100.00% -------- -------------------------------------------------- 2 Total 5xx Rejects 100.00% ======== ================================================== 116 Connections 1 Connections lost (inbound) 116 Disconnections 3 Removed from queue 3 Delivered 1 Hostname verification errors ****** Detail (10) ********************************************************************************* 113 SASL authentication failed -------------------------------------------------------------- 113 92.24.80.207 host-92-24-80-207.ppp.as43234.net 113 LOGIN 113 generic failure 195 Miscellaneous warnings ------------------------------------------------------------------ 113 SASL authentication failure: cannot connect to saslauthd server: Permission denied 41 inet_protocols: IPv6 support is disabled: Address family not supported by protocol 41 inet_protocols: configuring for IPv4 support only 2 5xx Reject relay denied ----------------------------------------------------------------- 1 46.242.103.110 unknown 1 [email protected] 1 114.42.142.103 114-42-142-103.dynamic.hinet.net 1 [email protected] 1 Connections lost (inbound) -------------------------------------------------------------- 1 After RCPT 3 Delivered ------------------------------------------------------------------------------- 3 myhost.xx 1 Hostname verification errors ------------------------------------------------------------ 1 Name or service not known 1 46.242.103.110 broadband-46-242-103-110.nationalcablenetworks.ru === Delivery Delays Percentiles ============================================================ 0% 25% 50% 75% 90% 95% 98% 100%

    Read the article

  • best practice to removing DC from Site that no longer connects via vpn in another city

    - by dasko
    hi i am looking for a recap of what i have done already to see if i missed anything. i had two cities connected by wan using a ipsec persistent tunnel between gateways. i had one DC (DOMAIN CONTROLLER) in each city that was a global catalog server (GC) they were set up to replicate and i had them configured under Sites and Servers with their own subnet etc... about 6 months ago the one city was removed and i was not able to gracefully remove, through dcpromo, the server that was there. it is no longer used and cannot be brought back. the company went from two sites down to single site. Problem is i had a whole bunch of kcc errors and replication bugs in the event viewer. i wanted to clean up my active directory and decided to use the ntdsutil metadata cleanup commands. i removed the server from the specifed site based on a procedure from petri website. I then removed the instances of the old DC and site from Sites and Servers. Then i went and cleaned up the DNS by removing Host A records, NS server name from both the local DNS forward lookup zone and the _msdcs i also removed the reverse lookup zone for the subnet that no longer exists. is there anything i missed? thanks in advance for any help. gd

    Read the article

  • snort with barnyard2 not working on Fedora 12

    - by aHunter
    Has anyone come across this error with barnyard2 and snort? --== Initializing Barnyard2 ==-- Initializing Input Plugins! Initializing Output Plugins! Parsing config file "/etc/snort/barnyard2.conf" Log directory = /var/log/barnyard2 database: compiled support for (mysql) database: configured to use mysql database: schema version = 107 database: host = localhost database: user = test database: database name = snort database: sensor name = localhost:eth0 database: sensor id = 1 database: data encoding = hex database: detail level = full database: ignore_bpf = no database: using the "log" facility --== Initialization Complete ==-- ______ -*> Barnyard2 <*- / ,,_ \ Version 2.1.8 (Build 251) |o" )~| By the SecurixLive.com Team: http://www.securixlive.com/about.php + '''' + (C) Copyright 2008-2010 SecurixLive. Snort by Martin Roesch & The Snort Team: http://www.snort.org/team.html (C) Copyright 1998-2007 Sourcefire Inc., et al. WARNING: Ignoring corrupt/truncated waldofile '/var/log/snort/barnyard.waldo' Opened spool file '/var/log/snort/snort.log.1282004944' ERROR: Unknown record type read: 104 Fatal Error, Quitting.. Snort seems to be working correctly as I have managed to get logs via syslog but when I try to use the barnyard config via Unified2 it is not working. Presumably because of the above error. Thanks in advance.

    Read the article

  • IPv6: Can't ping anything - "Operation not permitted"

    - by Matthew Iselin
    I've been working on getting IPv6 support into my network, and had everything working properly for a short while. The server is running Ubuntu Server 8.10. Now however whenever I attempt to do anything related to IPv6 on the server, I get "Operation not permitted". This is coming from things like wide-dhcpv6-client (when trying to get an IPv6 address from the ISP) and radvd - both log errors of this type into syslog. Even pinging the loopback interface fails: xxx@gordon:~$ ping6 ::1 PING ::1(::1) 56 data bytes ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ^C --- ::1 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms xxx@gordon:~$ sudo ping6 ::1 sudo: unable to resolve host gordon PING ::1(::1) 56 data bytes ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ping: sendmsg: Operation not permitted ^C --- ::1 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms As you can see, I have attempted pinging as root, as most of the material I've found on the internet points to a permission problem. However, that has not helped. Any hints to getting unstuck would be appreciated.

    Read the article

  • Create SAMBA node trust relationship to Windows 2003 PDC server

    - by Rod Regier
    I am having problems creating a trust relationship between an OpenVMS/IA64 node running V/IA64 8.3-1H1, TCPIP 5.6 ECO 5, CIFS 1.1 ECO1 PS11 (SAMBA 3.0.28a) and Windows 2003 server running as a PDC. I do have two other OpenVMS/Alpha nodes running V/A 8.3, TCPIP 5.6 ECO 4, CIS 1.1 ECO1 PS10 (SAMBA 3.0.28a) with working trust relationships to the same Windows 2003 server. Looking for assistance in resolving the trust "handshake". \\ Details from failing node. Unless otherwise noted, corresponding files on working nodes are similar or identical. SMB.CONF extract: [global] server string = Samba %v running on %h (OpenVMS) workgroup = WILMA netbios name = %h security = DOMAIN encrypt passwords = Yes name resolve order = lmhosts host wins bcast Password server = * log file = /samba$log/log.%m printcap name = /sys$manager/ucx$printcap.dat guest account = DYMAX print command = print %f/queue=%p/delete/passall/name="""""%s""""" lprm command = delete/entry=%j map archive = No printing = OpenVMS net rpc testjoin [2010/08/13 16:09:28, 0] SAMBA$SRC:[SOURCE.RPC_CLIENT]CLI_PIPE.C;1:(2443) get_schannel_session_key: could not fetch trust account password for domain 'WILMA' [2010/08/13 16:09:28, 0] SAMBA$SRC:[SOURCE.UTILS]NET_RPC_JOIN.C;1:(72) net_rpc_join_ok: failed to get schannel session key from server W2K3AD2 for domain WILMA. Error was NT_STATUS_CANT_ACCESS_DOMAIN_I NFO Join to domain 'WILMA' is not valid net rpc join "-Uaccount%password" tdb_open_isam: error verifying status of file SAMBA$ROOT:[PRIVATE]secrets.tdb tdb_open_isam: errno value = 1 [2010/08/13 16:21:13, 0] SAMBA$SRC:[SOURCE.PASSDB]SECRETS.C;1:(72) Failed to open /SAMBA$ROOT/PRIVATE/secrets.tdb [2010/08/13 16:21:13, 0] SAMBA$SRC:[SOURCE.UTILS]NET_RPC.C;1:(322) error storing domain sid for WILMA tdb_open_isam: error verifying status of file SAMBA$ROOT:[PRIVATE]secrets.tdb tdb_open_isam: errno value = 1 [2010/08/13 16:21:13, 0] SAMBA$SRC:[SOURCE.PASSDB]SECRETS.C;1:(72) Failed to open /SAMBA$ROOT/PRIVATE/secrets.tdb [2010/08/13 16:21:13, 0] SAMBA$SRC:[SOURCE.UTILS]NET_RPC_JOIN.C;1:(409) error storing domain sid for WILMA Unable to join domain WILMA. \\ Example from other node: net rpc testjoin Join to 'WILMA' is OK

    Read the article

  • Sticky sessions not sticky on coldfusion cluster

    - by GreatSeaSpider
    we're trying to deploy a legacy coldfusion site onto a new CF8 cluster. The cluster consists of three cf instances running under JRUN4 on a single windows 2008 server. I've got the cluster set to not replicate sessions, and sticky sessions turned on. each instance is set to use J2EE session variables. The application tag for the site has: sessionmanagement="Yes" setclientcookies="Yes" setdomaincookies="Yes" when each instance starts... no errors are reported in the instance log and they join the cluster without any issues. though the intances do have: 16/10 08:31:25 info SessionReplicationService successfully joined a JINI lookup service (assigned JINI-ID .....) and 16/10 08:31:25 info Clusterable service SessionReplicationService discovered a SessionReplicationService peer on a JRun server named "xxxx" on host xxxx which is interesting since session replication is definately off, is the SessionReplicationService responsible for sticky sessions aswell? thats enough background, the problem is that the sticky sessions appear to simply not work, each request is bounced to a different instance, and it seems as if the sessions are being lost on each instance anyways? As soon as the cluster is down to a single instance, the web app works exactly as expected and the sessions seem fine. has anybody got any ideas for me? i've been trawling the web and I cant seem to find any answers.

    Read the article

  • MAC addresses on dual-NIC mainboards

    - by Tom O'Connor
    Here's a weird problem. We've got a number of devices with dual-NIC mainboards. Some are Realtek NICs, which suck. Some are Intel e1000s, which don't. I've just noticed on 2 machines, one is an Intel NIC, one is a Realtek, that when I put the MAC address of one machine into the dhcpd.conf file on our DHCP server to get it to PXE boot the machine into a rebuild environment, initially everything is fine. The server gets a DHCP allocation, and PXE boots into the Ubuntu preseed enviroment. On one or two machines, it gets as far as Ubuntu's DHCP network configuration, and fails. If i pull up a busybox shell (on tty2 on the installing machine), and run ip link, I can see that the UP flag is set on the other NIC. Here's some stuff. host xeon16-ghz240-gb48-node1 { hardware ethernet BC:AE:C5:07:1F:18; filename "pxelinux.0"; next-server 192.168.123.80; } That's what's in dhcpd.conf This is what ip link on the evil machine looks like. Only one NIC is actually connected (deliberately). As you can see, the NIC that's in the dhcpd config, is not marked as UP, and the link that is UP, isn't the one in DHCP. So far I've seen this on two brands of dual-NIC configuration. Does anyone know 1) what's causing it, and b) What we can do about it?

    Read the article

  • To clone or to automate a system installation?

    - by Shtééf
    Let's say you're setting up a cluster of servers performing the same task. Or say you're just setting up a bunch of different servers, but you expect to use a base configuration on all of your servers. Would it be better practice to create a base image and clone it, or to automate the installation and configuration? I occasionally end up in this argument with my boss, in situations where we're time-pressed. When he sees me struggle with perfecting the automation, his suggestion is often to clone the entire disk to the other machines. But my instinct has always been to avoid cloning. This is mostly from an Ubuntu perspective, but the question is fairly general. My reasons for avoiding cloning are: On a typical install, even if it's fresh, there are already several unique identifiers installed: filesystem UUIDs, SSH host keys, among others. These would have to be regenerated. Network needs to be reconfigured for each clone. This would need to be done off-line, of course, or the settings will conflict with other machines on the network. On the other hand, some of the cloning advantages are quite clear as well: (Initially?) less effort required than automating configuration. Tools exist to quickly address (some) of the above disadvantages. (I can see right through my own bias there.)

    Read the article

  • Nagios plug-in check_snmp receives NO SNMP data from a CISCO Router

    - by Shehryar
    I have tried setting up Nagios on Ubuntu 10.10, successfully installed and can login to web interface, I am however stuck on configuring snmp or I am doing something wrong here, i have followed various sites / nagios wiki to setup configuration (cfg) files. When I check on the web interface, it gives the following error on one of my cisco router: Current Status: UNKNOWN (for 0d 2h 55m 56s) Status Information: SNMP problem - No data received from host CMD: /usr/bin/snmpget -t 1 -r 5 -m RFC1213-MIB -v 1 [authpriv] 192.168.1.1:161 ifOperStatus.1 On the command-line itself, when I type the following, it just sits there waiting and waiting : sudo /usr/local/nagios/libexec/check_snmp -H 192.168.1.1 -C Routers -o sysUpTime.0 When I type the following command : I get an OK /usr/bin/snmpget -v1 192.168.1.1:161 1.3.6.1.2.1.1.5.0 -c "Routers" I have configured SNMP properly on our cisco device as we can collect SNMP Data via two other monitoring tool (SolarWinds and Manage Engine), we are tempted towards Nagios as its opensource. Will be grateful if someone could assist in rectifying this situation and guide me with setting up nagios to monitor Cisco Routers, Switches and a Few Servers. We want to monitor Bandwidth, cpu utilization, uptime and other necessary counters. Will be grateful for your assistance Thanks for reading Shehryar

    Read the article

  • Selenium server causes crazy load on server - how to prevent?

    - by Eric
    I'm running this linux: Linux host.themepark.com 2.6.32-220.4.1.el6.x86_64 #1 SMP Tue Jan 24 02:13:44 GMT 2012 x86_64 x86_64 x86_64 GNU/Linux And I run the Selenium stand-alone server on my box with this command: java -jar /home/l/cron/selenium-server-standalone-2.24.1.jar > /logs/selenium.log 2>&1 & Here's the problem: as soon as I do that, the server load starts skyrocketing. I even went back and downloaded older versions of the Selenium server, but same results with 2.23.1, 2.23.0, and 2.19.0. Note that the server load starts going nuts before I issue ANY commands to Selenium or do anything else. All I'm doing is firing up the server, per the command above. This used to work perfectly on my server without causing massive server load, so something has changed, but I'm not sure what. My server is a managed VPS so I don't know if there is some kind of auto-update script that kicked in or what... but it's a problem. (Incidentally, even though the server load climbs like crazy, everything still works: after firing up Selenium, my server creates a screen with Xvfb so Firefox will be happy, then a PHP script talks to Selenium to do what it needs to do before shutting everything down. It takes a LONG time, and the load gets all the way up to 8 [!!!] before it is finished, which kills my web server and makes the main site horribly unresponsive... but it does get everything done.) Any suggestions for what is going on, why it's started doing this and/or, most importantly, how I can make Selenium not kill the server when it starts up... would be GREATLY appreciated!

    Read the article

  • Apache Won't Restart After Compiling PHP with Postgres

    - by gonzofish
    I've compiled PHP (v5.3.1) with Postgres using the following configure: ./configure \ --build=x86_64-redhat-linux-gnu \ --host=x86_64-redhat-linux-gnu \ --target=x86_64-redhat-linux-gnu \ --program-prefix= \ --prefix=/usr/ \ --exec-prefix=/usr/ \ --bindir=/usr/bin/ \ --sbindir=/usr/sbin/ \ --sysconfdir=/etc \ --datadir=/usr/share \ --includedir=/usr/include/ \ --libdir=/usr/lib64 \ --libexecdir=/usr/libexec \ --localstatedir=/var \ --sharedstatedir=/usr/com \ --mandir=/usr/share/man \ --infodir=/usr/share/info \ --cache-file=../config.cache \ --with-libdir=lib64 \ --with-config-file-path=/etc \ --with-config-file-scan-dir=/etc/php.d \ --with-pic \ --disable-rpath \ --with-pear \ --with-pic \ --with-bz2 \ --with-exec-dir=/usr/bin \ --with-freetype-dir=/usr \ --with-png-dir=/usr \ --with-xpm-dir=/usr \ --enable-gd-native-ttf \ --with-t1lib=/usr \ --without-gdbm \ --with-gettext \ --without-gmp \ --with-iconv \ --with-jpeg-dir=/usr \ --with-openssl \ --with-zlib \ --with-layout=GNU \ --enable-exif \ --enable-ftp \ --enable-magic-quotes \ --enable-sockets \ --enable-sysvsem \ --enable-sysvshm \ --enable-sysvmsg \ --with-kerberos \ --enable-ucd-snmp-hack \ --enable-shmop \ --enable-calendar \ --with-libxml-dir=/usr \ --enable-xml \ --with-system-tzdata \ --with-mime-magic=/usr/share/file/magic \ --with-apxs2=/usr/sbin/apxs \ --with-mysql=/usr/include/mysql \ --without-gd \ --with-dom=/usr/include/libxml2/libxml \ --disable-dba \ --without-unixODBC \ --disable-pdo \ --enable-xmlreader \ --enable-xmlwriter \ --without-sqlite \ --without-sqlite3 \ --disable-phar \ --enable-fileinfo \ --enable-json \ --without-pspell \ --disable-wddx \ --with-curl=/usr/include/curl \ --enable-posix \ --with-mcrypt \ --enable-mbstring \ --with-pgsql=/mnt/mv/pgsql I'm using Postgres 8.4.0 and Apache 2.2.8; I have the following line in my Apache conf file: LoadModule php5_module /usr/lib64/httpd/modules/libphp5.so And when I attempt to restart Apache, I get the following error message: Starting httpd: httpd: Syntax error on line 205 of /etc/httpd/conf/httpd.conf: Cannot load /usr/lib64/httpd/modules/libphp5.so into server: /usr/lib64/httpd/modules/libphp5.so: undefined symbol: lo_import_with_oid Now, I know that this is a problem with Postgres with PHP because lo_import_with_oid is a function in the Postgres source which allows the importing of large objects; also, if I remove the --with-pgsql option, PHP and Apache get along great. I've scoured the Internet looking for answers all day, but to no avail. Does anyone have ANY insight into what is causing my problems.

    Read the article

  • Unable to access Windows share

    - by mbnoimi
    I've installed Alfresco 4.2.d under Ubuntu 12.04 LTS; Everything done fine except I can't access it from Windows share although I got the link from Alfresco explorer which is: file:///%5C%5CECSA%5CAlfresco%5CSites%5Cswsdp%5CdocumentLibrary%5CAgency%20Files%5CImages%5Ccoins.JPG I tried to access it from: \\ECSA but I failed too so I made a ping (192.168.0.70 is server IP) then I got: C:\Users\user>ping 192.168.0.70 Pinging 192.168.0.70 with 32 bytes of data: Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Reply from 192.168.0.70: bytes=32 time<1ms TTL=64 Ping statistics for 192.168.0.70: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms C:\Users\user>ping ECSA Ping request could not find host ECSA. Please check the name and try C:\Users\user> Some logs of what's going on: C:\Users\user>net view ECSA System error 1707 has occurred. The network address is invalid. C:\Users\user>nbtstat -a 192.168.0.70 Local Area Connection: Node IpAddress: [192.168.0.84] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- ECSA <20> UNIQUE Registered ECSA <00> UNIQUE Registered WORKGROUP <00> GROUP Registered MAC Address = 00-00-00-00-00-00 C:\Users\user> CIFS Server Configuration in file-servers.properties ### CIFS Server Configuration - file-servers.properties ### cifs.enabled=true cifs.serverName=${localname}A cifs.domain= cifs.broadcast=255.255.255.255 cifs.bindto=192.168.0.70 cifs.ipv6.enabled=false cifs.hostannounce=true cifs.disableNIO=false cifs.disableNativeCode=false cifs.sessionTimeout=900 cifs.maximumVirtualCircuitsPerSession=16 cifs.tcpipSMB.port=445 cifs.netBIOSSMB.sessionPort=139 cifs.netBIOSSMB.namePort=137 cifs.netBIOSSMB.datagramPort=138 cifs.WINS.autoDetectEnabled=true cifs.WINS.primary=192.168.0.70 cifs.WINS.secondary=192.168.0.1 cifs.sessionDebug= cifs.pseudoFiles.enabled=true cifs.pseudoFiles.explorerURL.enabled=true cifs.pseudoFiles.explorerURL.fileName=__Alfresco.url cifs.pseudoFiles.shareURL.enabled=false cifs.pseudoFiles.shareURL.fileName=__Share.url How can I fix this issue?

    Read the article

  • Openfiler iSCSI performance

    - by Justin
    Hoping someone can point me in the right direction with some iSCSI performance issues I'm having. I'm running Openfiler 2.99 on an older ProLiant DL360 G5. Dual Xeon processor, 6GB ECC RAM, Intel Gigabit Server NIC, SAS controller with and 3 10K SAS drives in a RAID 5. When I run a simple write test from the box directly the performance is very good: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 4.64468 s, 226 MB/s So I created a LUN, attached it to another box I have running ESXi 5.1 (Core i7 2600k, 16GB RAM, Intel Gigabit Server NIC) and created a new datastore. Once I created the datastore I was able to create and start a VM running CentOS with 2GB of RAM and 16GB of disk space. The OS installed fine and I'm able to use it but when I ran the same test inside the VM I get dramatically different results: [root@localhost ~]# dd if=/dev/zero of=tmpfile bs=1M count=1000 1000+0 records in 1000+0 records out 1048576000 bytes (1.0 GB) copied, 26.8786 s, 39.0 MB/s [root@localhost ~]# Both servers have brand new Intel Server NIC's and I have Jumbo Frames enabled on the switch, the openfiler box as well as the VMKernel adapter on the ESXi box. I can confirm this is set up properly by using the vmkping command from the ESXi host: ~ # vmkping 10.0.0.1 -s 9000 PING 10.0.0.1 (10.0.0.1): 9000 data bytes 9008 bytes from 10.0.0.1: icmp_seq=0 ttl=64 time=0.533 ms 9008 bytes from 10.0.0.1: icmp_seq=1 ttl=64 time=0.736 ms 9008 bytes from 10.0.0.1: icmp_seq=2 ttl=64 time=0.570 ms The only thing I haven't tried as far as networking goes is bonding two interfaces together. I'm open to trying that down the road but for now I am trying to keep things simple. I know this is a pretty modest setup and I'm not expecting top notch performance but I would like to see 90-100MB/s. Any ideas?

    Read the article

  • Network monitoring tools with API features

    - by Kev
    We use ks-soft's Advanced Hostmonitor package to monitor around 2000 items on our network. We think it's great, the chap that supports it is fantastic, the product is fast, stable and mature but I feel as as we grow as a company it's beginning to show some friction points in the area of integration with our back office admin systems. One of the things we'd like to do is be able to add new tests to whatever monitoring tool we use via an API. For example, when orders for servers come from our retail interface, the server gets built automatically, and as part of the automated build process we'd like to automatically add new tests to the network monitoring systems. Hostmonitor has some support for this via a feature called HM Script but we're starting to encounter some speedbumps - we can't add new operators/users we can't define new "Action Profiles" - these are the actions to be taken when a test goes good or bad. What we love about hostmonitor though are the Action Profiles. For example if a Windows IIS box goes bad our action profile for a bad test does something like: Check host again (one time) Wait another 30 seconds then test again Try restart app pool on remote machine (up to two times) Send an email to ops about the restart failure Try restarting IIS on remote machine (up to four times) Page duty admin (up to 5 times - stops after duty admin ACKS alert) Page backup duty admin (5 times - stops after duty admin ACKS alert) I'm starting to look around at other network monitoring tools and I'm looking for: a comprehensive API to be able to add/remove/control tests/test "action profiles"/operators (not just plugins, we need control and admin interfaces) the ability to have quite detailed action/escalation profiles (and define these via an API) I've looked at Nagios and Icinga but Ican't seem to glean from their documentation whether we could have these features or not, or if we could, how much work would be involved to implement/customise. Can anyone provide any advice, guidance or experiences?

    Read the article

  • How to setup DNS server behind a VPN

    - by Brian
    I want to host some websites behind a VPN and I need some help with the finer points of the configuration. Thus far I've settled on OpenVPN + Bind9 and I want to configure the domains like this: External DNS mail.example.com www.example.com vpn.example.com I want to be able to connect to the vpn using 'vpn.example.com'. Once connected I then want to be able to resolve anything which is '*.vpn.example.com' with the DNS server sitting behind the VPN. I know that OpenVPN can push DNS servers to clients when they connect. I am having trouble though with the DNS config, both internal and external. I've gone through a few tutorials etc. and tried to reason about it myself but I'm not getting anywhere. So my main question would be does the above configuration make sense? If so, any general pointers or examples would be greatly appreciated. Here's what I've tried so far based on this tutorial (I've redacted my domain with example.com). When I try the tests with dig at the end to check the resolution is working it fails. db.vpn.example.com $TTL 15m vpn.example.com. IN SOA ns.vpn.example.com. [email protected]. ( 2009010910 ;serial 900 ;refresh 900 ;retry 900 ;expire 900 ;minimum TTL ) vpn.example.com. IN NS ns.vpn.example.com. ns IN A 192.168.0.2 test IN A 192.168.0.2

    Read the article

  • Not Able To Connect to Windows Server 2008 R2 using FileZilla Externally

    - by obautista
    I configured FTP Service/Role on my Windows Server 2008 R2 machine. I am able to connect from the inside, but not from the outside. On the inside I tested using cmd prompt and IE FTP. On the outside, I am testing with FileZilla and IE FTP. From the outside, IE FTP prompts me to enter my username/pwd, but nothing happens. Page eventually times out and I get "Internet Explorer cannot display page". Using FileZilla, I get the following messages. Note FileZilla resolved domain name and authenticates. I did not configure FTP Wirewall Support on the FTP site. I am not sure if I need to do this. I set up basic authentication, non-ssl, not allowing anonymous. I testing with Windows Firewall Turned off and on (I added windows firewall rule for port 21). On my network firewall (Cisco), I added a rule to forward port 21 traffic to FTP Server. Status: Resolving address of ftp.technologyblends.com Status: Connecting to 75.149.66.201:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER * Response: 331 Password required for . Command: PASS *** Response: 230 User logged in. Command: SYST Response: 215 Windows_NT Command: FEAT Response: 211-Extended features supported: Response: LANG EN* Response: UTF8 Response: AUTH TLS;TLS-C;SSL;TLS-P; Response: PBSZ Response: PROT C;P; Response: CCC Response: HOST Response: SIZE Response: MDTM Response: REST STREAM Response: 211 END Command: OPTS UTF8 ON Response: 200 OPTS UTF8 command successful - UTF8 encoding now ON. Status: Connected Status: Retrieving directory listing... Command: PWD Response: 257 "/" is current directory. Command: TYPE I Response: 200 Type set to I. Command: PASV Error: Connection timed out Error: Failed to retrieve directory listing

    Read the article

  • Internet Explorer / Windows 7 does not want to show HTML file from local network drive

    - by Jaanus
    Setup: I have Windows 7 running inside VirtualBox on Mac OS X host. I have a shared drive with some HTML files, that I am mounting as a local drive W: in Windows, from the VirtualBox server \VBOXSVR. I want to look at them with a browser in Windows. Chrome in Windows 7 opens and shows those HTML files just fine (file:///W:/welcome.html). But Internet Explorer does not, and shows this error instead of the files: Internet Explorer cannot display the web page What you can try: [button Diagnose Connection Problems] More information This problem can be caused by a variety of issues, including: Internet connectivity has been lost. The website is temporarily unavailable. The Domain Name Server (DNS) is not reachable. The Domain Name Server (DNS) does not have a listing for the website's domain. If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section. For the internet zone in the status bar, it shows: Internet | Protected Mode: On IE settings are a mystery to me, and I could possibly get it to work by tweaking IE settings, but I don't know which ones. How do I make IE show the same files that Chrome is happy to show? (Chrome showing them means that the files themselves are fine, there is something about the setup that just makes IE be a diva.)

    Read the article

  • Mounting Replicated Gluster Multi-AZ Storage

    - by Roman Newaza
    I have Replicated Gluster Storage which is used by Auto scaling Servers. Both, Auto scaling and Storage are allocated in two Availability zones. Gluster: Number of Bricks: 4 x 2 = 8 Transport-type: tcp Bricks: Brick1: gluster01:/storage/1a # Zone A Brick2: gluster02:/storage/1b # Zone B Brick3: gluster03:/storage/2a # Zone A Brick4: gluster04:/storage/2b # Zone B Brick5: gluster01:/storage/3a # Zone A Brick6: gluster02:/storage/3b # Zone B Brick7: gluster03:/storage/4a # Zone A Brick8: gluster04:/storage/4b # Zone B I used Round Robin DNS for Gluster entry point, so DNS name resolves to all of the storage server addresses which are returned in different order all the time: # host storage.domain.com storage.domain.com has address xx.xx.xx.x1 storage.domain.com has address xx.xx.xx.x2 storage.domain.com has address xx.xx.xx.x3 storage.domain.com has address xx.xx.xx.x4 The Storage is mounted with Native Gluster Client: # grep storage /etc/fstab storage.domain.com:/storage /storage glusterfs defaults,log-level=WARNING,log-file=/var/log/gluster.log 0 0 I have heard Gluster might be mounted with the first Server IP and after that it will fetch its configuration with the rest of Servers. Personally, I never tested single Server mount setup and I don't know how Gluster handles this. On EC2, traffic among single Availability zone is free and between different zones is not. When Client in zone A writes to storage and IP of Storage in zone B is returned, it will cost me twice more for data transfer: Client (Zone A) - Storage Server (Zone B) - Replication to Storage Server (Zone A). Question: Would it be better to mount Storage Server of the same zone, so that data transfer charges apply only for replication (A - A - B)?

    Read the article

  • Postgresql server will not start

    - by Claudiu
    I'm on Windows 7. I restarted my computer. I then tried to connect to the database and got an error. I don't remember which one in particular but it was some connection issue. I decided to try to restart the server, so I clicked on "Restart server" from the start menu. This blocked. After a few minutes I killed the process and tried again, only to get a "The service is starting or stopping. Please try again later." message. I rebooted the computer again, tried to start again, and got the same error. I killed the pg_ctl process and tried starting it manually, but that didn't work either: C:\Users\DrClaud>cscript "C:\Program Files\PostgreSQL\8.3\scripts\serverctl.vbs" start wait Microsoft (R) Windows Script Host Version 5.8 Copyright (C) Microsoft Corporation. All rights reserved. The PostgreSQL Server 8.3 service is starting................................... ....................................... The PostgreSQL Server 8.3 service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534. The start command returned an error (2) Any ideas?

    Read the article

  • Bind9 DNS help with psuedo domains

    - by Tempname
    I have setup a dns server on my home network to manage some apps that I have written for home. Currently I have 3 "domains" that I am using: controller devserver fileserver The first issue that I am having is that when I attempt to ping the parent domain of any of these 3 I am unable to. I simply get ping: unknown host controller. I however can ping any of the subdomains I have setup for these 3 parent domains. The second issue is I am unable to ping any of the 3 parent domains or any child domains from my window machines. I have verified that these domains work on other devices in my house (ipod touch, ipad, cell phone). Any help with this is greatly appreciated Here is bind data file for my parent domain controller: ; ; BIND data file for local loopback interface ; $TTL 604800 @ IN SOA controller. admin.controller. ( 9 604800 86400 2419200 604800 ) ; @ IN NS controller. @ IN A 192.168.1.104 controller IN A 192.168.1.194 admin.controller. IN A 192.168.1.104

    Read the article

  • Enable PasswordAuthentication on OpenSuse 10

    - by Riduidel
    Hi, I've a virtual instance of Suse 10 running in my VMWare player, and I'm fighting against it to allow ssh password authentcation. How can I make it working since I already have tuned the /etc/ssh/ssh_config file like that # $OpenBSD: ssh_config,v 1.20 2005/01/28 09:45:53 dtucker Exp $ Host * # ForwardAgent no ForwardX11 yes ForwardX11Trusted yes PubkeyAuthentication no RhostsRSAAuthentication no RSAAuthentication no PasswordAuthentication yes HostbasedAuthentication no Protocol 2 SendEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES SendEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT SendEnv LC_IDENTIFICATION LC_ALL With ssh connection sending me the following logs Incoming packet #0x5, type 51 / 0x33 (SSH2_MSG_USERAUTH_FAILURE) 00000000 00 00 00 1e 70 75 62 6c 69 63 6b 65 79 2c 6b 65 ....publickey,ke 00000010 79 62 6f 61 72 64 2d 69 6e 74 65 72 61 63 74 69 yboard-interacti 00000020 76 65 00 ve. Outgoing packet #0x6, type 50 / 0x32 (SSH2_MSG_USERAUTH_REQUEST) 00000000 00 00 00 04 72 6f 6f 74 00 00 00 0e 73 73 68 2d ....root....ssh- 00000010 63 6f 6e 6e 65 63 74 69 6f 6e 00 00 00 14 6b 65 connection....ke 00000020 79 62 6f 61 72 64 2d 69 6e 74 65 72 61 63 74 69 yboard-interacti 00000030 76 65 00 00 00 00 00 00 00 00 ve........ Telling me that it expects publickey and keyboard-interactive authentications, which I don't want to use.

    Read the article

  • Puppet: array in parameterized classes VS using resources

    - by Luke404
    I have some use cases where I want to define multiple similar resources that should end up in a single file (via a template). As an example I'm trying to write a puppet module that will let me manage the mapping between MAC addresses and network interface names (writing udev's persistent-net-rules file from puppet), but there are also many other similar usage cases. I searched around and found that it could be done with the new parameterised classes syntax: if implemented that way it should end up being used like this: node { "myserver.example.com": class { "network::iftab": interfaces => { "eth0" => { "mac" => "ab:cd:ef:98:76:54" } "eth1" => { "mac" => "98:76:de:ad:be:ef" } } } } Not too bad, I agree, but it would rapidly explode when you manage more complex stuff (think network configurations like in this module or any other multiple-complex-resources-in-a-single-config-file stuff). In a similar question on SF someone suggested using Pienaar's puppet-concat module but I doubt it could get any better than parameterised classes. What would be really cool and clean in the configuration definition would be something like the included host type, it's usage is simple, pretty and clean and naturally maps to multiple resources that will end up being configured in a single place. Transposed to my example it would be like: node { "myserver.example.com": interface { "eth0": "mac" => "ab:cd:ef:98:76:54", "foo" => "bar", "asd" => "lol", "eth1": "mac" => "98:76:de:ad:be:ef", "foo" => "rab", "asd" => "olo", } } ...that looks much better to my eyes, even with 3x options to each resource. Should I really be passing arrays to parameterised classes, or there is a better way to do this kind of stuff? Is there some accepted consensus in the puppet [users|developers] community? By the way, I'm referring to the latest stable release of the 2.7 branch and I am not interested in compatibility with older versions.

    Read the article

  • Easyphp Web Setup

    - by Dominique
    I've tried to setup an EasyPHP in local and make it visible from the Web via DynDNS, which I've already successed many times before, but now this just doesn't work, maybe I've forgotten something... *The "server" is a common workstation. Here is what I have done : 1) Installed EasyPhp (with a index.php/html file in WWW folder) 2) Changed the port in the config to port 80 3) Forwarded port 80 to the server IP in my router configuration 4) Added the server to the router DMZ *Also tried removing antivirus/firewall I've installed PortListener, pointed it on port 80, and when I access "myname.dyndns.com" it says Client connected GET / HTTP/1.1 Host: xyz.dyndns-remote.com User-Agent: Mozilla/5.0 (Windows; U; Windows NT 6.0; fr; rv:1.9.2.12) Gecko/20101026 Firefox/3.6.12 (.NET CLR 3.5.30729) Accept: text/html,application/xhtml+xml,application/xml;q=0.9,/;q=0.8 Accept-Language: fr,fr-fr;q=0.8,en-us;q=0.5,en;q=0.3 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive So the server is accessible via Web, receive the connection successfully, but in my browser it says that the connection failed and show nothing...

    Read the article

  • How to give a user NTFS rights to a folder, via Powershell

    - by Don
    I'm trying to build a script that will create a folder for a new user on our file server. Then take the inherited rights away from that folder and add specific rights back in. I have it successfully adding the folder (if i give it a static entry in the script), giving domain admin rights, removing inheritance, etc...but i'm having trouble getting it to use a variable I set as the user. I don't want there to be a static user each time, I want to be able to run this script, have it ask me for a username, it then goes out and creates the folder, then gives that same user full rights to that folder based on the username i've supplied it. I can use Smithd as a user, like this: New-Item \\fileserver\home$\Smithd –Type Directory But can't get it to reference the user like this: New-Item \\fileserver\home$\$username –Type Directory Here's what i have: Creating a new folder and setting NTFS permissions. $username = read-host -prompt "Enter User Name" New-Item \\\fileserver\home$\$username –Type Directory Get-Acl \\\fileserver\home$\$username $acl = Get-Acl \\\fileserver\home$\$username $acl.SetAccessRuleProtection($True, $False) $rule = New-Object System.Security.AccessControl.FileSystemAccessRule("Administrators","FullControl", "ContainerInherit, ObjectInherit", "None", "Allow") $acl.AddAccessRule($rule) $rule = New-Object System.Security.AccessControl.FileSystemAccessRule("Domain\Domain Admins","FullControl", "ContainerInherit, ObjectInherit", "None", "Allow") $acl.AddAccessRule($rule) $rule = New-Object System.Security.AccessControl.FileSystemAccessRule("Domain\"+$username,"FullControl", "ContainerInherit, ObjectInherit", "None", "Allow") $acl.AddAccessRule($rule) Set-Acl \\\fileserver\home$\$username $acl I've tried several ways to get it to work, but no luck. Any ideas or suggestions would be welcome, thanks.

    Read the article

< Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >