Search Results

Search found 21441 results on 858 pages for 'internet man'.

Page 440/858 | < Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >

• Ubuntu, connecting to WEP

  - by Holly

  Hello, I successfully installed Ubuntu onto my usb hard drive. However, I'm not sure what the issue is with my internet. I'm not familiar enough with ubuntu to know whether this is a problem with recognizing my wireless card or with my internet, etc. So I suppose my question is, how do I tell whether it's recognizing my wireless card? (Network manager isn't showing any wireless signals, though I wasn't sure if it was supposed to. ) And, if it's not working, how do I go about troubleshooting that issue? Thanks!

  Read the article

• is there a cheatsheet for linux commands to save your system?

  - by Asaf

  I've recently lost my window options, had to somehow manipulate my way to Xchat and ask some people how do I get it back (it was metacity --replace, and after I decided to stop the command and run it in background the X was completely useless so I had to do killall -u user). And that was after the internet connection stopped working for some reason (might've been the ISP) ..The thing is, after using linux a long time, I still get the feeling that on dire situations, I don't know the good tricks (stuff like metacity --replace) I feel like a really need like a "rescue" cheatsheet for things like "how to save the X no matter what without pressing reset" and "how to reset the system to "normal state"" "how to connect to the internet through the command line" "how to monitor what the X is doing" (using ubuntu linux 10.04 btw)

  Read the article

• how to properly edit hosts, hostname and resolf.conf? [migrated]

  - by Firewall

  i,v been searching the internet for a real noop tutorial on the subject but could not found any direct info. on how to edit these files the proper way. i,v got a debian internet server that i use to host some personal domains and runs squid and rTorrent. the server is up and running with no problems but i am confused about a few things. lets say that i named my server (foo), my domain is (example.com) and my public IP is 95.211.133.200 now: should /etc/hostname contains: tango.example.com or tango <----- just the server name should /etc/hosts contains: 127.0.0.1 localhost.localdomain localhost 95.211.133.200 foo.example.com foo should /etc/resolf.conf contains (along with the nameservers) both: domain example.com search example.com or just the first one. are there any other files that i should edit in order to make things right? last thing, the command: domainname returns: (none) i believe it should return (example.com). what should i do to correct that?

  Read the article

• Continuing to code on large projects

  - by user3487347

  I am a hobbyist programmer, and I've started many medium - sized projects to work on just by myself. These include games, a raytracer, physics simulations etc. By the time these projects get to a certain size (around 5000 lines), I begin to slow down in adding features to the program. This is not because of a lack of ideas of what to implement in a program, but rather a struggle in how to go about it. In particular, I'm afraid of breaking what I already have working in order to implement a new feature. I've tried using version control like Git and Subversion, but these seem unnecessary when you are a one man team. I simply have a folder of "versions" of my program, one for each major change I make. How do I keep coding past this 5000 line mark? What about the 50000 line mark?

  Read the article

• Emperors dont come cheap

  Sorry I replied in a polite email. Maybe next year, when budgets allow for this. It was addressed to the organizer of TechEd US, which was to be in New Orleans this year. Man, I would have loved to be in new Orleans this year, but, I guess these guys only understand one language and I wont be their puppy any more. You see, they wouldnt pay for my business class flight to TechEd from Israel. Me the great emperor of unit testing?! travelling coach for 12 hours? No thanks. I have better things to...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Routing between two subnets. (Need Solution)

  - by rehanplus

  Need help according to scenario given: Client end PCs: 400 + Network : Server 1 (Linux) : 192.168.2.0/24 (For Application, Internet not working) GW: 192.168.2.1 Clients: 192.168.2.1 - 254 Server 2 (Linux) : 192.168.3.0/24 (For Internet users) GW: 192.168.3.1 Clients: 192.168.3.2 - 254 Server 2 is connected to DSL Broadband. Server 1 and Server 2 both are on same physical network i.e. Same switches. Current issue: i have to deploy a file and print server but this server will be accessed by both (192.168.2.x and 192.168.3.x) one same workgroup. as both subnets are on same switched network. Limitations: Currently there is no hardware routers and firewall. Need to complete this task with Linux / Windows / AD. Tested / Worked so far: Configured one PC with two NIC's With the IPS: NIC 1 : 192.168.3.2 GW: 192.168.3.1 Subnet: 255.255.255.0 NIC 2 : 192.168.2.2 GW: Empty Subnet: 255.255.255.0 Kindly provide any solution what should i do to get sharing enable on both Subnets. Thank you All

  Read the article

• Windows 8 update error code 80072EFE? What's the solution?

  - by RidDeBakTiYar

  I keep getting the error code 80072EFE and windows is not installing 11 important updates. Also .NET framework 3.5 is not getting installed it keeps saying that its not able to download. My internet connection is working fine and I am able to browse over the entire internet. I have not changed any of the settings and I am running on Windows 8. The error code I get for .NET is 0x800F0906. Windows live essential are also not getting downloaded. Is there some issue with the Microsoft servers these days?

  Read the article

• SEO problem for site with 2 domains [closed]

  - by Harry

  Possible Duplicate: What is duplicate content and how can I avoid being penalized for it on my site? I have two domains pointing to the same site. I want both domains to co-exist, they share most of the same content, but they differ in design and they are aimed at different markets / rivaling communities. Is there a way to let google know that these two domains are the same site and don't cause me to get hit with a duplicate content penalty? Any other general SEO tips for this situation would also be welcomed. Thanks. Come on man, why was this closed. The linked page is completely irrelevant for me.

  Read the article

• Is NTFS-3G safe for writing?

  - by katrmr

  These days, I have to use the NTFS-3G driver to write to an NTFS drive (which will later be used in Windows). But I still remember the olde times of Linux ntfs driver which clearly said in the docs: 'If you write to an ntfs volume, run our special program afterwards which will clean up the damage done.' So, I read through the man, the docs, the Tuxera site and Askubuntu and found no discussion of the write-safety of NTFS-3G. The only thing that was mentioned somewhere is that the driver doesn't support the NTFS journal. So, the question is, can I use NTFS-3G and be sure that I will later read what I have written to the files? Won't, for example, Windows find the journal entries missing and 'clean up' the data according to its own faulty understanding?

  Read the article

• Is it possible to pick out what applications that should run through a VPN in Ubuntu 9.10

  - by user31257

  Hi, I'm using Ubuntu 9.10 and I'm wondering if it is possible to pick out what applications that should use a VPN. Say for example that I want to route Transmissions connection through a VPN, but I also want to be able to access my computer over SSH via my usual static IP-adress ( running the SSH- deamon over my normal internet connection) . Is there anyway to do this? As I've been searching the web I found that at least it is possible to set whether you want both your internet connection and your "local network" to go through the VPN or if you want just the "local network" to go through it. I'm using the network-manager-pptp with the pptp- protocol.

  Read the article

• Firestarted Blocking DHCP?

  - by Chiggins

  Alright so on my Ubuntu laptop I get a wireless internet signal, and then distribute it to a switch where my other computers are connected. I also have Firestarter installed on the laptop. I have a problem where the only way that one of my client computers try to get an IP and such from my laptop, it can't because Firestarter is blocking it somehow. I have to stop the firewall in Firestarter, then connect from a client. It connects right away, then I turn Firestarter back on. In the preferences there is an option in "Firewall" called "Start/restart firewall on DHCP lease", but if I have that checked or not doesn't make a difference. So, what can I do to fix this? Its kinda annoying to have to do this whenever I have to connect to the internet. Thanks!

  Read the article

• Wireless range extender throughput extremely slow.

  - by Alan B

  I've got a Belkin 54G router connected to the internet, and a Belkin range extender model F5D7132. I can get the range extender connected to the parent router SSID no problem, in repeater mode as opposed to access point mode. My Windows 7 laptop connects to the extender, which has a different SSID, and it connects with the full 5 bars. The issue is that when going through the extender internet performance is murderously slow, even getting the config pages of the extender or router is bad. When I connect directly to the router, all is well.

  Read the article

• IE 9:Release

  - by xamlnotes

  Yippie: IE 9s coming out March 14!: http://windowsteamblog.com/ie/b/ie/archive/2011/03/09/a-more-beautiful-web-launches-on-march-14th.aspx For you guys that love other browsers that’s ok. Personally I love IE for many reasons such as ease of use and stability.  I am cranked up to see what IE 9 does as it was retooled from the start. So this one should be big. Also, its bringing HTML 5 support now so we can have much richer applications. Its about time that HTML was revved to move from the old text like stuff to a better model. More info: http://windowsteamblog.com/ie/b/ie/archive/tags/ie9/ Some glimpses here: http://windows.microsoft.com/en-US/internet-explorer/products/ie-9/features and http://www.beautyoftheweb.com/#/highlights/all-around-fast   Looks like it will be much faster (with hardware support now) in many areas.  Better startup times and install times are hot on my list of favorites too. Plus they retooled the UI in many places too.  The UI looks a lot cleaner now: http://windows.microsoft.com/en-US/internet-explorer/products/ie-9/features/focused-on-your-websites Plus theres tons more like changes in tab pages, a notfication bar, pinned sites and so forth. Plus theres cool integration with Windows 7 also.

  Read the article

• Squid3 not working. Access denied.

  - by Nitish

  I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines acl localnet src 192.168.0.0/16 and http_access allow localnet. eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT: iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.5.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?

  Read the article

• View Security Server and Direct Connection

  - by Poort443

  I have a Security Server for my connections from the Internet. This works fine, accept when I enable "Direct Connection to the desktop". I found the following statement on this: If you bypass the secure connection, the client must establish a direct RDP communication to the desktop virtual machine over RDP (port 3389). Does this mean I have to open 3389 (RDP) to the Internet if I want to use Direct Connections? If I disable Direct Connections to get my Security Server working, I have to disable it on my Connection Server. It's my understanding that this means that if I reboot my Connection Server, all the View clients get disconnected. Is there a way I can disable "Direct Connections" for the Security Server, while enabling it for access from the LAN? Tia.

  Read the article

• L'homme vs. l'ordinateur : une machine peut-elle faire votre métier ? Dans quelles tâches un PC peut-il remplacer l'humain ?

  L'homme vs. l'ordinateur : une machine peut-elle faire votre métier ? Dans quelles tâches un PC peut-il remplacer l'humain ? Steven Hsu est physicien, et il a énoncé la phrase suivante, à propos des nouveaux admis dans les Universités : "Certains sont moins bons pour prédire les UG GPA qu'un algorithme tout simple". Une constatation cinglante qui réveille la bonne vieille problématique man versus machine. Dans beaucoup de métiers en rapport avec les sciences, la logique ou les chiffres, des travailleurs effectuent des calculs et des opérations qui semblent extrêmement complexes, ne serait-ce -dans une banque- que pour déterminer si une personne peut se voir accorder un prêt. Pourtant, dans c...

  Read the article

• Optimize Windows file access over network

  - by Djizeus

  At my company I frequently need to access shared files over a Windows network. These files are located on the other side of the planet, so I guess the file share goes through some kind of VPN over Internet, but I don't control this and it is supposed to be "transparent" for me. However it is extremely slow. Displaying the content of a directory in the file explorer takes about 10s. Even if over the Internet, I did not expect that retrieving a list of file names would be that long. Are there any settings to optimize this from my Windows XP workstation, or is it mostly related to the way the network is configured? The only thing I have found so far is to cache all file names, while by default only short file names are cached (http://support.microsoft.com/kb/843418).

  Read the article

• Using m0n0wall in a VM for testing.

  - by tombull89

  I'd like to use m0n0wall inside a (VirtualBox) VM to play about with and see what it can do. Ultimately the goal is to have a number of virtual machines connected to a internal virtual network which goes through to the m0n0wall VM, and then the m0n0wall box connected to the internet through NAT or a bridged addaptor on my host machine. I can find out how to set the LAN and WAN addresses, but this seems to be only for using m0n0wall as a router intead of attached to another router. Let's see if I can diagram this: [Virtual Machine]---Internal (VM Only) Network ---[m0n0wall VM]---Bridged/NAT Addaptor---["real" router]---Internet. Can anybody suggest how I should do this or am I thinking m0n0wall isn't meant to be used like this?

  Read the article

• South Florida Code Camp and Other Events

  - by MOSSLover

  My grandmother wanted me to make her a video when she heard I got MVP in SharePoint Server of one of my sessions.  I decided I haven’t visited in two years, so maybe I can do an in person session.  I googled around and found South Florida Code Camp, which will be Saturday, February 12th.  I will be doing a session at 9:50 in the morning on Silverlight just for my grandmother and whoever shows up.  Here is the link for more information: http://www.fladotnet.com/codecamp/. In the upcoming months I plan to return to SharePoint Saturday speaking.  We are also organizing another New York event on Saturday, July 30th.  We will open up submissions for sponsors and speakers somewhere after Best Practices Conference in LaJolla.  I will be speaking at Best Practices LaJolla and the The Expert’s Conference in the upcoming months.  I am really sorry for the lack of updates it’s just been incredibly crazy going back and forth to DC and not having internet on weekdays or having the slowest internet in the world has just not helped.  I am also trying to attend Coders 4 Charity this year, so I can visit some people in St. Louis.  I’ve already got an incredibly crazy schedule going for the year.  I might be helping organize more events.  I’m going to volunteer at New York Code Camp too doing whatever they need this year.  Check back for more updates. Technorati Tags: SharePoint Conferences 2011,Events 2011

  Read the article

• How do I bridge connections in Debian?

  - by Josh

  In windows I can select Local Area Connection and Wireless Network Connection, right click and select Bridge Connections How can I achieve the same effect in Linux? (Debian to be exact) Pretty much I want Computer B to connect to Computer A via ethernet cable. Well Computer A is connected wirelessly. Allowing Computer B to get on the internet. == UPDATE == I've enabled IP forwarding and used the following iptables command: iptables -t nat -A POSTROUTING -o wlan0 -j MASQUERADE I'm still unable to access the internet from Computer B though.

  Read the article

• how to get wireless to work on my HP Compaq nx6325 Notebook on 12.04

  - by user211487

  When my laptop ran XP, the wireless worked perfectly. Now the only way I get internet is having it wired in my living room - which is MASSIVELY inconvenient for me seeing as my room is outside. I have downloaded the driver from 'Additional Drivers', reset my computer (with difficulty, it also doesn't seem to like turning off, so I have to 'kill' it) and still nothing! I have looked all over the internet trying to find solutions but I just cant seem to get it to work. I have a USB wireless stick but I can't load the driver from the CD. I got this comment on a previous question: "Using either Snaptic Package Manager or Ubuntu's own Software Centre, remove "bcmwl-kernel-source" if it's already installed. Next, search for "firmware-b43-installer” and “b43-fwcutter” and install both. Finally, running Software Sources and checking the Additional Drivers tab you should find Broadcom STA Wireless Driver that you can select, install and on reboot hopefully have wireless working ok..." Which I replied: "Right, so I tried to find/remove "bcmwl-kernel-source" but couldn't find anything. I managed to install both "firmware-b43-installer” and “b43-fwcutter” using terminal, after finding out how it worked. And lastly, I couldn't figure out how to find 'Broadcom STA Wireless Driver' - still no more additional drivers. And my wireless is still not working. My laptop has a button that turns wifi on and off and since I put Ubuntu on it, it hasn't worked. And also, my computer still doesn't seem to restart properly - it just gets stuck on the ubuntu loading screen." - hope that helps, somewhat I am VERY new to Linux, not very technical and in need of help! -Running Ubuntu 12.04 32bit on a HP Compaq nx6325 Notebook Thank you to anyone who replies, its much appreciated

  Read the article

• free voice chat over lan

  - by blackjack

  hi is there free a way to voice chat over my lan connected systems without using internet( i use skype for it)?

  Read the article

• Hard drive skipped in boot

  - by Yasin

  Good evening. I just installed Ubuntu 12.04 using a USB, but right after the install, after restarting the machine, I get a message asking me to insert a bootable drive. My boot settings in Bios have the hard drive first, then DVD, then USB stick, and I have two systems installed, Windows 7 and Ubuntu 12.04. I suspected the hard drive got somehow disconnected internally, so I checked but everything was in place. I used the live USB to start Ubuntu, and I could see the hard drive and mount whatever partition I wanted. The one that contains the recently installed Ubuntu, looks the same. (It hasn't been deleted or anything). I'm not sure if this is a hardware problem or a loader(grub) problem, because the hard drive is visible. Only it isn't seen by the BIOS. My only means of internet connection is a USB modem, which doesn't work when I'm using the live USB, so I have can't download anything from the internet, in case someone asks. I also reinstalled Ubuntu 12.04, to no avail. This is my second problem with this laptop, and Ubuntu, and it's not even a week old. I hope this one gets solved. Thank you.

  Read the article

• Design Patterns for SSIS Performance (Presentation)

  Here are the slides from my session (Design patterns for SSIS Performance) presented at SQLBits VI in London last Friday. Slides - Design Patterns for SSIS Performance - Darren Green.pptx (86KB) It was an interesting session, with some very kind feedback, especially considering I woke up on Friday without a voice. The remnants of a near fatal case on man flu rather than any overindulgence the night before I assure you. With much coughing, I tried to turn the off the radio mike during the worst, and an interesting vocal range, we got through it and it seemed to be well received. Thanks to all those who attended.

  Read the article

• Resized Ubuntu 14.04 partition will not boot

  - by user292577

  First, a little background info: I intended to install Ubuntu alongside OS X, but I accidentally erased my entire hard drive and was left with Ubuntu alone. Yesterday, I finally tried to create a desperate partition and OS X. I successfully shrank my Ubuntu partition and created ~40 GB of free space. I used gparted to do this. At first I tried to use Internet Recovery to install OS X on the unallocated space I had created, but discovered I couldn't. I went back to gparted and created a FAT partition with that space. I'm pretty sure I actually did this using my Ubuntu partition on my hard drive (the one I had just shrunken), rather than the USB live boot I had used to shrink it. Therefore, at this point, I think my Ubuntu partition was still functioning properly. I went back to internet recovery and used disk utility to turn the FAT partition into a Mac OS Extended (Journaled) [HFS/HFS+] partition. I believe this is probably where the problem occurred. I successfully reinstalled OS X and found it to be fully functioning. However, when I tried to boot back into the Ubuntu partition all I got was a black screen with a little white cursor (it looks similar to a terminal screen/the Mac DFU mode, but I can't type anything into it. Is there anything I can do to repair my Ubuntu partition? If not, can I at least recover the data from it? Thank you for any help.

  Read the article

< Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >