Search Results

Search found 15348 results on 614 pages for 'invalid ip'.

Page 440/614 | < Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >

• What is the right way to use Internet Sharing in OS X?

  - by Bob King

  For a while now I've been using the Wireless in my Mac Mini as a seperate WiFi access point because my main router doesn't quite cover my whole house. There is a dedicated CAT 5E line down to the Mini, which has a static IP address. I've turned Internet Sharing on, using Airport/WiFi but it seems my options for security are limited. Can I do WPA2? Also, it seems like my iPhone only connects 25% of the time, and the rest of the time it claims I've given a bad password. I've tried "Forget this network" repeatedly.

  Read the article

• Unable to access internet if wireless enabled

  - by balki

  The following is my route output. eth0 is my wired network and eth1 is my wireless network. Only wired one has access to internet. If I enable wireless, I am not able to access internet, it tries to access via eth1 and I get 404 page of the wireless router. Why does eth1 have higher preference though default is eth0 (link)? [balakrishnan@mylap ~]$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 10.26.0.1 0.0.0.0 UG 0 0 0 eth0 10.26.0.0 * 255.255.192.0 U 1 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 192.168.1.0 * 255.255.255.0 U 9 0 0 eth1

  Read the article

• Dhcp server change fail after successful importing to new machine

  - by Tathagata

  I transfered the configs of a dhcp server from one server to another both running Windows Server 2003 R2 following http [://] support.microsoft.com/kb/325473. The new server has a statically configured ip(outside the scope) like the old one. Stopped the server on the old, and started up in the new server (authorized too) - but when I ipconfig /renew from a client its network interface fails with all 0.0.0.0 (or 169...*). I read somewhere I need to reconcile the scope to sync the new registry values ('ll try this tomorrow). What other troubleshooting steps can I take other than these (which didn't help)? Things work fine when the old server resurrects and the new one is taken down. The new server showed there was no requests for offer.

  Read the article

• How to connect 2 virtual hosts running on the same machine?

  - by Gabrielle

  I have 2 virtual hosts running on my Windows XP laptop. One is Ubuntu running inside vmware player. The other is MS virtual PC (so I can test with IE6 ). The Ubuntu virtual host is running my web application with apache. I can point my browser on my laptop at the Ubuntu IP and view my web app. I read this post http://stackoverflow.com/questions/197792/how-to-connect-to-host-machine-from-within-virtual-pc-image and was able to get my Virtual PC to ping my physical machine using the loopback adapter. But I'm stuck on getting my Virtual PC to see my web application running in the Ubuntu vmware player host. I appreciate any suggestions.

  Read the article

• PC cannot see Clonezilla server when using PXE Boot

  - by r2b2

  Hi I have about 15 workstations, all have the same hardware specs so I figured clonezilla is perfect for cloning them. So I followed everything this guide says :cloning groups of school computers That guide above makes it all look easy but when I tried setting up Clonezilla Server Edition on my laptop (Kubuntu 10.10) and configured the master computer for PXE boot, the master computer could not see the Clonezilla server. It just shows 'DHCP...' which seems it trying to grab an IP address but to no avail. Please help. Thanks!

  Read the article

• Remove a known network from Windows 8

  - by Edward Brey

  When Windows 8 detects a network based on the assigned IP address, netmask, default gateway, etc., it remembers the network along with the setting you give it as a public or private network. If you change the configuration of a network (e.g. reconfigure your router), Windows may determine you are on a new network and assign it a name of Network 2 or YourAPN 2. This less-than-friendly name shows up in many places in the Windows 8 UI, but unlike the good old days of Windows 7, there doesn't appear to be any UI to merge or delete these networks. What's the best way to merge or delete networks you don't want?

  Read the article

• Vmware server: Browser does not load user interface

  - by matnagel

  I have the latest vmware server isntalled on ubuntu 8.04 lts 64 bit. I access the user interface over this url, which matches my ip and port settings: https://10.1.1.99:11222/ui Sometimes it works in fierofox 3.6, but sometimes not. Same in Google Chrome. When it does not work, what happens is that the cert is checked, the browser is loading something, but the result is a white page. Sometimes the favicon of vmware (blue with 3 squares) appears, but only the white page. And sometimes it works. I reload many times, most of the time the whit epage appears again. On some days I succeed. But on many days not. I can give more info if someone tells me what is needed. Please help, we need this badly.

  Read the article

• Windows Server 2003: Remapping external domain

  - by Chuck Harmston

  We're playing a going-away prank on a coworker, and would like to use a rule in our internal DNS server to redirect techcrunch.com to point at one of our internal development servers. Basically, I'd like to accomplish the same thing as adding a line to a Linux /etc/hosts file, only for the entire network. I have access to our DNS server. How would you go about doing this? I created an entry in the reverse lookup subnet with the 'Host Name' of techcrunch.com and the 'Host IP' of our development server, a Linux box running Debian on which I've created a virtualhost to handle requests to techcrunch.com. It doesn't appear to be working, however, and my expertise has reached its limit. Thanks!

  Read the article

• Cannot resolve a single A Record from client machine

  - by Alex

  I set up a simple Bind server on my VPS and it is working properly. The problem occurs with my local windows machines, which are connected to internet through the home router. I created an A-record named 'dev' and it is invisible from my local network for some reason, though people from other locations can resolve dev.mydomain.com. Ironically, dev.mydomain.com cannot be resolved for myself only. If I add another A-record, say, 'gamma' then it becomes visible from my local windows machines instantly. So this is just for that particular 'dev' name. The only difference is that I had dev.mydomain.com server on another IP but that was a month ago; all nameservers have been changed since then. I tried to reboot my router and flushed dns cache on windows machines: no result. Thank you in advance.

  Read the article

• Apache - access two or more virtual hosts from outside

  - by André Alçada Padez

  I have an apache2 server running on my ubuntu system. I have two sites enabled: default (ServerName localhost) site2 (ServerName jslib) I run a windows Virtual Box Machine, to be able to test my stuff in IE. If i type the ubuntu's IP in the addressbar i get the localhost. I was wondering how can i access both (or more as i need it) from other machines. Thanks update I have configured the windows' hosts file like so: 10.0.2.2 localhost 10.0.2.2 jslib It works, but i am really looking for something that i can configure on the server side, and then just change the value of the URL, am i crazy?

  Read the article

• Add a server between router and switch (production)

  - by Kossel

  I have a small office network basically like below, there are more router/pc connected in S1. As you can see, the router is doing job of DHCP, DNS. but now I wish to add a Linux server between R1 and S1, So I can monitor the network traffic and do other more advance server admin stuff. the whole office network is 192.168.1.x and people are using their computer everyday. What network configuration should the new Linux server have (both interfaces) in order to minimize the changes need in the network? tried to change R1 ip to 192.168.100.1 them add the server with FE0/0 192.168.100.1 and FE0/1 192.168.1.1 but looks cannot ping the original Router..

  Read the article

• Setting up a linux switch

  - by Shahmir Javaid

  I have a C++ Program to sniff each and every packet that crosses my linux box. However i need to now get my linux box to listen to every traffic in my network. I could buy a managed switch and set up port spanning, but i aint paying 200+ £'s for a switch and plus gives me a chance to learn. My Network +---------Computer A | Internet-----Router------Switch-------------+---------Linux Box | +---------Computer B Proposed Network +---------Computer A | Internet-----Router------Linux Box--------Switch eth0^ ^eth1 | +---------Computer B How would i setup this in linux. Do i just configure both the ethernet on different IP Address on the same network. Or am i completelly on the wrong track My System Fedora 13. Thanks

  Read the article

• What is the best way to auto failover to backup WAN link for web server

  - by user66735

  Hi Iam looking for the best way to ensure my server ( application ) remains available for all my users (on web/LAN/WAN ), when my primary ISP link fails. My server is behind a firewall on which both my primary & secondary links land. I have already assigned multiple IPs (both ISP's static IP) to the 'A' record ( host.example.com ) in the DNS. However in a round robin scenario is there a way I can ensure that my web user will not see a "cannot dislay web page" error ever ?? What are the better methods to achieve this??

  Read the article

• Vista to Vista network visability issue

  - by Sk93

  Hi All, I've got a Vista Business PC and a Vista Business Laptop connected via a virgin media router (Netgear CG2100D) and I cannot get the two machines to see each other correctly over the network. The laptop is connected via wireless, whilst the pc is wired. Both are set to recieve their network settings automatically (DHCP) and both have the windows firewall (the only firewall on either) turned off completely. I can ping each machine fine from one another using the ip addresses, and I can also connect via \. However, connections via \ fail, and I cannot see the machines in the network map. I have tried turning netBIOS to be "always on" on both adapters, but this makes no difference. I've been messing around pretty much for 6 hours now and am getting quite fustrated by this! (my original aim was to get media sharing working, but I've pretty much abandoned that for now). Any ideas?

  Read the article

• Can only connect to IIS site through localhost

  - by Rembrandt Q. Einstein

  I'm building a web service for my company's iPhone application, and everything's been working smoothly by running tests through localhost on the development machine. I'm now in the phase where I need to test connections from other computers within the network, and any connection other than localhost gives me a 404. My internal IP, 127.0.0.1, and computername all get 404 when connecting from any computer, either the one the site's hosted on or any others on the network. Telnet can get through to port 80, and I've temporarily disabled all firewalls on this machine (I do not have control over the external firewall, but I'm only testing connections within the network) Does anyone have a clue why this is happening? I was able to connect to the web service from other computers when hosted on a Mac via Apache, but because I'm now using a SQL Server connection I'm restricted to using IIS for Windows Authentication. Googling only provided answers related to firewalls, and mine is disabled note: I cannot use Anonymous Authentication, but even in testing that it did not affect the issue.

  Read the article

• spam email forwarding by server

  - by kikio

  Let's start with this scenario: We have a mailbox (i.e. in yahoo), every message is sent by this account, marked as spam by Gmail spam filter. (because the address or sender IP is blacklisted, not because of content) There is a server which is able to forward incoming messages to another address (email forwarding), for example, to a Gmail mailbox. And it is not blacklisted. The question is: If we send a message, through the dirty mailbox to the server, and server forward it to a Gmail mailbox, will it marked as spam by spam filters?

  Read the article

• SSL Certificate

  - by Dremarturg

  Hey, I have a mail-server running and I want to buy a SSL-Certificate as they are pretty cheap now. I use mail.domain.com as reverse-DNS, POP3 and SMTP clients use mail.domain.com (some use pop3.domain.com and smtp.domain.com) for sending and receiving e-mails. The SSL-Submission asks me for a domain - is it mail.domain.com or domain.com as I do not have a Wildcard-SSL? I just want to use it for Mail. Or is it possible to use it for both by using domain.com? (Apache and Postfix/Courier on the same server and IP)

  Read the article

• Access Configuration Page of Modem (in bridge mode) through router

  - by Ujjwal Singh

  Given the Network Configuration: Internet (121.243.x.y/27) | (121.243.x.z) Static : Public Global IP Modem Bridge Mode | WiMAX (192.168.1.1/24) +169.254.1.1/24 : Modem Configuration Page | (192.168.1.2) Router DLink DIR 615 | Ethernet + WiFi (192.168.0.1/24) | Local network (192.168.0.2) Workstation Ethernet | no WiFi Is there any way, maybe using Routing Tables, to access the Modem configuration page at 169.254.1.1 from my local network, using a Windows 7 PC? Note that the modem is currently able to display its configuration page at 169.254.1.1, i.e. even while it is in bridge mode.

  Read the article

• VPN IPsec site 2 site and static routing

  - by Giacomo

  Hello everybody experts! My question is pretty simple, but I can't figure it out because I'm pretty noob with these network stuffs. I have a vpn IPsec site2site between 2 lan with different ip classes, LAN A is class C and LAN B is class A. The vpn presents the LAN A to LAN B with the 10.178.51.64/27 segment. The problem is that when I start the vpn connection I cant Ping any 10.174.0.0/24 address(LAN B remote segment) from my LAN A; I think I need some kind of static route. Could u help me out pls? Thx Regards

  Read the article

• test if master dns has trasnfered copt to slave

  - by su55

  Hello, I setup my master and slave using freebsd. im currently running the Bind 9.X version, so far everything is working successfully. Just one small problem. I cant get the master copy of my dns to transfer it to the slave server. i included transfer-allow {192.168.1.111;}; // this is the slave servers ip i ran the rndc reload command to check but i dont see the copy in the /etc/named/master/? Any help would be necessary and if you like the layout of my dns, I can provide that too.

  Read the article

• Can't connect to Internet through WiFi, but can with cable

  - by aldy505

  I'm using Windows 7 32-bit, Toshiba Portege laptop. I want to connect to the WiFi, usually I can do that easily. But, I don't know.. maybe when I tried to install a Microsoft Research: Mesh Virtual WiFi that could connect more than 2 wireless networks. I wanna try in connecting both Wireless router and my personal Ad-Hoc. Now, my laptop don't recognize my WiFi, well, I can connect to the WiFi but it says: "Limited access" and doesn't really connect to the internet. But when I plug the LAN cable, it works. I know the problem is in the laptop's wireless connection or in the properties. Any help for this? UPDATE: The IP and DNS settings, I set to automatic, and when I ran diagnostic, Windows tells me that the wireless network adapter is the problem, but they told me to insert the LAN cable, so how to fix the wireless? They didn't tell me how to fix that.

  Read the article

• Preventing my postfix to send my local users spam

  - by Jack

  I have a postfix/dovecot mail server with 100 different users. When they send an email they need to be authenticated. I successfully use saslauth to achieve this. Few days ago I had a problem. One specific user, probably with a virus or a spam-bot installed in its computer, started to send out through my server thousands of emails in few hours. As result, my ip has been blocked by many isp provider (@aol, @yahoo, and others) and has been listed in many blacklist, making all my 100 users unable to send any email to anyone. What is the best practice to avoid this problem? It would be great if my server could recognize a spamming user and automatically block it. Also, have a limit of, say, 30 emails per hour could be a partial solution. Any idea how to face this problem? Thank you

  Read the article

• HTTPS vs. VPN for communication between business partners?

  - by Andrew H

  A business partner has asked to set up a site-to-site VPN just so that a few servers can communicate with each other over HTTPS. I'm convinced this isn't necessary, or even desirable. To be fair it must be part of a wider policy, potentially even a legal requirement. However I'd like to convince them to simply offer an IP to us (and us only) and a port of their choosing for HTTPS. Has anyone had a similar experience, or had to come up with a cast-iron argument against a VPN? Allow me to expand a little - we have a web service that initiates a connection to the partner's corresponding service using an encrypted HTTP connection. The connection uses a client certificate to authenticate. The connection is firewalled so only our IPs can contact the service. So why is a VPN necessary?

  Read the article

• One vs. many domain user accounts in a server farm

  - by mjustin

  We are in a migration process of a group of related computers (Intranet servers, SQL, application servers of one application) to a new domain. In the past we used one domain user account for every computer (web1, web2, appserver1, appserver2, sql1, sqlbackup ...) to access central Windows resources like network shares. Every computer also has a local user account with the same name. I am not sure if this is necessary, or if it would be easier to configure and maintain to use one domain user account. Are there key advantages / disadvantages of having one single user account vs. dedicated accounts per computer for this group of background servers? If I am not wrong, one advantage besides easier administration of the user account could be that moving installed applications and services around between the computers does not require a check of the access rights anymore. (Except where IP addresses or ports are used)

  Read the article

• Why are some web clients requesting a page named "cache"?

  - by Toto

  We see errors like this in the apache error log: [Thu May 17 14:32:35 2012] [error] [client 192.168.1.1] File does not exist: /home/www-data/mywebsite.com/r/cache, referer: http://www.mywebsite.com/r/1010 It is strange because: There is no reference in the code/url about a folder/file "cache". The folder/file "cache" does not exist The client is randomly trying to access a "cache" folder everywhere on the website. It is always trying to access the folder/file "cache" following this pattern: Pattern: /level1/.../levelwhatever/filename (referer) /level1/.../levelwhatever/cache We run a LAMP (Debian stable: PHP 5.3.3-7+squeeze9. We also use APC 3.1.3p1). We use Google Analytics and AdSense. We do not know how to reproduce the problem. Note: I replaced the user's IP in the code for privacy.

  Read the article

< Previous Page | 436 437 438 439 440 441 442 443 444 445 446 447  | Next Page >