Search Results

Search found 22807 results on 913 pages for 'andy main'.

Page 442/913 | < Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >

• Logitech MX3200 keyboard stopped working

  - by Roy Rico

  I have a Logitech MX3200 wireless keyboard and mouse set, and keyboard stopped working. I was working with it and it just stopped in the middle of using it. Some notes: The mouse still works flawlessly, i've tried to reconnect the KB i've tried to reconnect everything, mouse reconnects, keyboard reconnects (or pretends to) I've tried to hard reset (holding the connect button on the receiver for 10 seconds). I've tried new batteries I took out the batteries out of the KB & Mouse and unplugged the receiver over night. The media keys still work (launches winamp) but they main keys does not At this point, i've tried everything I've seen online. I just want to know is my keyboard dead in the water? I would say it's been about 8 months to a year since i've bought it, and the articles i find on the internet all say that's as long as they last... is this true? what's everyone's experience? I hope it's not true.

  Read the article

• Are long methods always bad?

  - by wobbily_col

  So looking around earlier I noticed some comments about long methods being bad practice. I am not sure I always agree that long methods are bad (and would like opinions from others). For example I have some Django views that do a bit of processing of the objects before sending them to the view, a long method being 350 lines of code. I have my code written so that it deals with the paramaters - sorting / filtering the queryset, then bit by bit does some processing on the objects my query has returned. So the processing is mainly conditional aggregation, that has complex enough rules it can't easily be done in the database, so I have some variables declared outside the main loop then get altered during the loop. varaible_1 = 0 variable_2 = 0 for object in queryset : if object.condition_condition_a and variable_2 > 0 : variable 1+= 1 ..... ... . more conditions to alter the variables return queryset, and context So according to the theory I should factor out all the code into smaller methods, so That I have the view method as being maximum one page long. However having worked on various code bases in the past, I sometimes find it makes the code less readable, when you need to constantly jump from one method to the next figuring out all the parts of it, while keeping the outermost method in your head. I find that having a long method that is well formatted, you can see the logic more easily, as it isn't getting hidden away in inner methods. I could factor out the code into smaller methods, but often there is is an inner loop being used for two or three things, so it would result in more complex code, or methods that don't do one thing but two or three (alternatively I could repeat inner loops for each task, but then there will be a performance hit). So is there a case that long methods are not always bad? Is there always a case for writing methods, when they will only be used in one place?

  Read the article

• unable to send mail from postfix on Ubuntu 12.04

  - by gilmad

  I'm trying to send an email through Google from my localhost. (via PHP5.3) But Google keeps on blocking my requests. I tried to follow the solutions given to a few similar questions, but for some reason they do not work. I followed these instructions to configure it - http://www.dnsexit.com/support/mailrelay/postfix.html Now for the config data: my main.cf file looks like that: relayhost = [smtp.gmail.com]:587 smtp_fallback_relay = [relay.google.com] smtp_sasl_auth_enable = yes smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd smtp_sasl_security_options = my sasl_passwd looks like that: [smtp.gmail.com]:587 [email protected]:password and that is how the mail.log rows look like: Dec 14 10:24:50 COMP-NAME postfix/pickup[5185]: 1C3987E0EDD: uid=33 from= Dec 14 10:24:50 COMP-NAME postfix/cleanup[5499]: 1C3987E0EDD: message-id=<[email protected] Dec 14 10:24:50 COMP-NAME postfix/qmgr[5186]: 1C3987E0EDD: from=, size=483, nrcpt=1 (queue active) Dec 14 10:24:50 COMP-NAME postfix/smtp[5501]: 1C3987E0EDD: to=, relay=smtp.gmail.com[173.194.70.109]:587, delay=0.61, delays=0.19/0/0.32/0.1, dsn=5.7.0, status=bounced (host smtp.gmail.com[173.194.70.109] said: 530 5.7.0 Must issue a STARTTLS command first. w3sm8024250eel.17 (in reply to MAIL FROM command)) Dec 14 10:24:50 COMP-NAME postfix/cleanup[5499]: C20677E0EDE: message-id=<[email protected] Dec 14 10:24:50 COMP-NAME postfix/bounce[5502]: 1C3987E0EDD: sender non-delivery notification: C20677E0EDE Dec 14 10:24:50 COMP-NAME postfix/qmgr[5186]: C20677E0EDE: from=<, size=2532, nrcpt=1 (queue active) Dec 14 10:24:50 COMP-NAME postfix/qmgr[5186]: 1C3987E0EDD: removed

  Read the article

• How to debug lack of sound in Asus EEE PC

  - by Kalmar

  I have an Asus EEE PC 1225B with fresh Lubuntu 12.04. And no sound. It doesn't seem to be some common problem, so I have to make some research what's up. I tried running alsamixer, so I know I have Realtek ALC269VB with nothing muted unexpectedly. What can I do next to identify and solve the problem? Additional info: alsamixer shows two cards: HD-Audio Generic and HDA ATI-SB (Realtek ALC269VB); the first one is muted. ~$ aplay ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave aplay: main:682: blad otwierania audio: Nie ma takiego pliku ani katalogu The Polish part can be translated as "error opening audio: There is no such file or directory". ~$ sudo lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Wrestler HDMI Audio [Radeon HD 6250/6310] Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 3 Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> -- 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) (rev 40) Subsystem: ASUSTeK Computer Inc. Device 103b Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

  Read the article

• Problem with alleg42.dll / program crashes / Allegro & Codeblocks

  - by user24152

  I'm having a serious problem with allegro. The program should display random pixels on the screen and when I build and run it I get the following error message: Below is the full code of my program: #include <stdio.h> #include <stdlib.h> #include <time.h> #include "allegro.h" #define Text_Color_Red makecol(255,0,0) int main() { int ret; int color_depth = 32; int x; int y; int red; int green; int blue; int color; //init allegro allegro_init(); //install keyboard install_keyboard(); //set color depth to 32 bits set_color_depth(color_depth); //init random seed srand(time(NULL)); //init video mode to 640 x 480 ret = set_gfx_mode(GFX_AUTODETECT_WINDOWED,640,480,0,0); if(ret !=0) { allegro_message(allegro_error); return 1; } //Display string textprintf(screen,font,0,0,10,0,Text_Color_Red,"Screen Resolution is: %dx%d -- Press ESC to quit !",SCREEN_W,SCREEN_H); //display pixels until ESC key is pressed //wait for keypress while(!key[KEY_ESC]) { //set a random location x = 10 + rand() % (SCREEN_W-20); y = 10 + rand() % (SCREEN_H-20); //set a random color red = rand() % 255; green = rand() % 255; blue = rand() % 255; color = makecol(red,green,blue); //draw the pixel putpixel(screen, x, y, color); } //quit allegro allegro_exit(); } END_OF_MAIN() Error message: AllegroPixels1.exe has encountered a problem and needs to close. We are sorry for the inconvenience. Error signature: AppName: allegropixels1.exe AppVer: 0.0.0.0 ModName: alleg42.dll ModVer: 4.2.3.0 Offset: 0006c05c I am using Windows XP inside a virtual machine under Parallels 7.0

  Read the article

• How to get list of defined shortcut keys in the Start menu?

  - by Peter Mortensen

  How can I find out which keyboard shortcuts are defined inside the Start menu? And what shortcuts they are assigned to? Platform: Windows XP SP2 64 bit. Example: I open my main Visual Studio solution with a shortcut key, Ctrl+Alt+M. This is setup by having a shortcut inside the Start menu with: Target: "D:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\IDE\devenv.exe" D:\dproj\MSQall\MSQuant\MSQuant.sln Shortcut key: Ctrl+ALT+M If a new shortcut is added and its shortcut key is also set to Ctrl+Alt+M then there are now two shortcuts with the same shortcut key (conflict). To prevent this it would be nice to know which shortcut keys are already assigned and to which shortcuts.

  Read the article

• Django - Moving database from development to production servers

  - by Garfonzo

  I am working on a Django project with a MySQL backend. I'm curious about the best way to update a production server's database to reflect the changes made on the development server's database? When I develop now, I make some changes to a models.py file, then to a schemamigration using South. Sometimes I do several migrations across several apps within the main project folder before it's ready for the production database. This means that there are several migration files in the app/migrations/ folder created by South. So on the production server, how does one update the database to reflect all the changes made in development, without having any data loss?

  Read the article

• Video on Hyperion Tax Provision

  - by Lia Nowodworska - Oracle

  ( in via Jan) EPM Information Development has asked us to remind you about the new video available for Hyperion Tax Provision. You can view it on the OracleEPMWebcasts YouTube channel here: http://bit.ly/1jxLlCy An information rich 4:40 minutes of your time.  So please take a look. The video gives a brief overview of the main features of  Hyperion Tax Provision. You will learn ... That Tax Provision and reporting System builds on the Hyperion Financial Close Reporting Platform That much of the Tax Provision flow process is similar to the Financial Close Process and that the modules have been aligned to work together very closely. That HTP enables you to integrate Book- and Tax Reporting on a common platform. That It uses the technology of HFM, ties in with SmartView and can be used with Hyperion Financial Reporting. That the native integration between the Financial System and the Tax System creates transparency for the Tax Departments and removes bottlenecks in the tax process. More technical information can be found here: Oracle Hyperion Tax Provision Data Sheet Oracle Hyperion Tax Provision White Paper Oracle Hyperion Tax Provision Documentation If you have another 45 minutes to spare and want to get into greater detail, then you can check out the recording of an Advisor Webcast that we did earlier last year: You can find this via KM Doc Oracle Business Analytics Advisor Webcast Schedule and Archive Recordings (Doc ID 1456233.1) -> Select the Tab "Archived 2013" and it is the third from the top: "Oracle Hyperion Tax Provision - Features and Overview with Demo" If you have questions towards that Advisor Webcast, you may participate in the Community Discussion about it. (layout and post: Torben, authorized: Lia)

  Read the article

• for an ajax heavy web application which would be better SOAP or REST?

  - by coder

  I'm building an ajax heavy application (client-side strictly html/css/js) which will be getting all the data and using server business logic via webservices. I know REST seems to be the hot topic but I can't find any good arguments. The main argument seems to be its "light-weight". My impression so far is that wsdl/soap based services are more expressive and allow for more a more complex transfer of data. It appears that soap would be more useful in the application I'm building where the only code consuming the services will be the js downloaded in the client browser. REST on the other hand seems to have a smaller entry barrier and so can be more useful for services like twitter in allowing other developers to consume these services easily. Also, REST seems to Te better suited for simple data transfers. So in summary SOAP is useful for complex data transfer and REST is useful in simple data transfer. I'm currently under the impression that using SOAP would be best due to the complexity of the messages but perhaps there's other factors. What are your thoughts on the pros/cons of soap/rest for a heavy ajax web app?

  Read the article

• Please help me decide if I should I change jobs [closed]

  - by KindaNewbie

  About me: I am very entrepreneurial and believe I would do well working solo as a consultant and possibly hiring help. I do want to do that at some point. I love to learn and a good challenge. Please help me make this decision! Current job (I am there for about 4 years): Pros: secure job good pay (I guess I am 80 percentile for my level/geographical area) large corporation - main business is not software excellent health insurance for low cost to me, pension, 401k matching, 6 weeks paid time off per year small dev team use of latest technologies (mostly WPF/silverlight) low supervision (I can do personal things all the time) I get to do a lot of moonlighting and my goal was to go solo full-time in a year or so. Cons: small team of non-professional devs 50% of my time I do things I don't enjoy projects are not meaningful to the organization If I left it wouldn't be too hard for them - business would resume as usual. Nobody besides my small team of 3 has any idea about software development whatsoever. Prospect job: Pros: small/agile software company same salary as current job same size dev team but all are very sharp (I would probably be the weakest of the team in the beginning) technology used is outside my comfort zone (latest cool web technolgies such as html5/jquery/...) - I am not a web dev and they know that. ton of learning opportunity Start-up - possibility of stock option/partial ownership of some sort Cons: Small office space - not able to do personal things as often (may be pro) No room for moonlighting less benefits (but salary can compensate for that)

  Read the article

• Putting a Windows DC, Exchange in a DMZ

  - by blsub6

  I have one guy at my company telling me that I should put FF:TMG in between my main Internet-facing firewall (Cisco 5510) and put my Exchange server and DC on the internal network. I have another guy telling me that I should put the Exchange server and DC in a DMZ I don't particularly like the idea of having my mailboxes and DC's usernames/passwords in a DMZ and I think that Windows authentication would require me opening up so many ports between my DMZ and my internal network that it would be a moot point to have it out there anyways. What are some thoughts? How do you have it set up?

  Read the article

• Speeding up Connection Between Computer and Wireless/Bridged Router

  - by Justian Meyer

  Hey everyone, I looked through other questions, but didn't find useful responses. Our main computer has a dl speed of 6 Mbps, but some of our other computers are getting only 40-200 Kb! The router is wireless, but all computers are connected using a Netgear Wall-Plugged Bridge XE102, which transmits information via the building's powerline. It can't be the hardware itself, however, because some computers still manage decent speeds. The computers afflicted are running on Microsoft XP Service Packs 2 and 3, but so are computers that are totally functional. These speeds severely impede on productivity and are excruciatingly frustrating when trying to cram in time in the early hours. Could it be an issue with the computer? Location? Router? Many thanks in advance, Justian

  Read the article

• How to solve this problem with a 'tuned' prompt in ZSH?

  - by Mnementh

  I have an adjusted prompt in my ZSH-configuration. Main feature is, that this prompt is colored red, so that I can easily it distinguish from the outputs of programs. My prompt is defined as follows: PROMPT=$'\e[0;31m%n@%m:%~> \e[0m' This works mostly fine, but sometimes my cursor switches to another position on tab-completion and some characters are left behind on the screen and mangle up the commandline. That is a little annoyance, but if someone knows a solution for this, I would appreciate it.

  Read the article

• Dual monitor setup can cause boot problem?

  - by kriszpontaz

  I have a two monitor setup, one 22" (1680x1050 res., 16:10) and another 19" (1280x1024 res. 5:4). I've installed ubuntu 11.10 beta2 x86, and the installation worked fine, the system boot was successful. I've upgraded ubuntu from the main server, and after restart, booting with the kernel 3.0.0-13, my system hangs up with a purple screen, and than nothing happens (the system boots successful with the kernel image 3.0.0-8). Nvidia current drivers not installed, but if i install it, the situation is the same. I have an Nvidia 9600GT installed. I tried to boot with one screen attached, I've tried each port, but no luck at all. With kernel image 3.0.0-8 the system successfully boots with each display attached, but the farther kernels (3.0.0-11; 3.0.0-12; ect.) all freezes, even one display, or multiple attached. I have two systems with ubuntu installed, and the other (with Ati HD 2400XT, latest closed drivers) don't have any issues like this, I wrote about. Update: The problem solved by reinstalling the operatin system, without automatically installing updates during install, with only one monitor attached. After completing installation, and clean reboot, i've installed closed nVidia drivers. After all, i found it's safe to connect another monitor to the system, it's not causing any problems. Probably the situation stays like this.

  Read the article

• HTTP resource caching / fetching

  - by Bobby Jack

  I'm trying to optimise a page, and I'm seeing some strange behaviour. Each time I click on a link to the page, all resources are fetched from the server, responding with 200s. However, when I refresh the page (specifically, F5 in Firefox), all resources return a 304 and - of course - the page loads much faster as a result. The main page returns a 200 in both cases. In the refresh case, If-Modified-Since headers are sent with the requests to the resources. However, in the 'clicking a link' case, they are not. What's the reason for that, and can I control it?

  Read the article

• Backing up data in an encrypted way

  - by Eli Bendersky

  I have the following use case: There's some data from my PC I want to periodically back-up online I own some hosting, so I want to use that for the backups, don't want to pay to another backup service I want to encrypt my data locally prior to moving it to the server I have no problem writing scripts to automate the process (say, periodically generate the backup and upload by FTP to my server), but my main question is about step 3 - the encryption: which way is recommended to encrypt my files (say, collected into a .ZIP) prior to uploading to the server? P.S. TrueCrypt seems popular but it's not quite what I'm looking for, since I don't want the files to be constantly encrypted here on my PC.

  Read the article

• Should I, and how do I incorporate microdata into my asp.net website with 47 pages?

  - by Jason Weber

  I have an asp.net (vb) with 47 pages. The problem is that it's in 10 different languages, although 98% just use English. I have 5 master pages. I've read Google Webmaster Tools, but I'm still confounded. I'm reading about how microdata is the way to go. Does this mean I should put itemtype and itemprop span and div tags in my master pages, or should I do all of my 47 pages (.resx resource files) separately? The main key phrase I want throughout search results is "machine vision". For instance, the first couple sentences on my "about.aspx" page are: <span itemprop="name">USS Vision Inc.</span> (USS) is a privately-owned company with headquarters in <span itemprop="locality">Detroit, Michigan, USA</span>. We design, engineer, produce, and integrate special machine vision error-proofing products and <a href="http://www.ussvision.com/services/" target="_self" itemprop="url">services</a> that create lean factories by improving the quality of manufactured products, and by significantly reducing manufacturing costs through advanced automation. Am I doing this right, or how would I do this if I'm not? Should I use the itemprop="url" or other rich snippets for every link in my website? I mean, do I need to add an itemprop to just about everything, or can I just alter my master pages? Any guidance in this regard to help improve my SEO and SERPS would be greatly appreciated!

  Read the article

• Why is the use of abstractions (such as LINQ) so taboo?

  - by Matthew Patrick Cashatt

  I am an independent contractor and, as such, I interview 3-4 times a year for new gigs. I am in the midst of that cycle now and got turned down for an opportunity even though I felt like the interview went well. The same thing has happened to me a couple of times this year. Now, I am not a perfect guy and I don't expect to be a good fit for every organization. That said, my batting average is lower than usual so I politely asked my last interviewer for some constructive feedback, and he delivered! The main thing, according to the interviewer, was that I seemed to lean too much towards the use of abstractions (such as LINQ) rather than towards lower-level, organically grown algorithms. On the surface, this makes sense--in fact, it made the other rejections make sense too because I blabbed about LINQ in those interviews as well and it didn't seem that the interviewers knew much about LINQ (even though they were .NET guys). So now I am left with this question: If we are supposed to be "standing on the shoulders of giants" and using abstractions that are available to us (like LINQ), then why do some folks consider it so taboo? Doesn't it make sense to pull code "off the shelf" if it accomplishes the same goals without extra cost? It would seem to me that LINQ, even if it is an abstraction, is simply an abstraction of all the same algorithms one would write to accomplish exactly the same end. Only a performance test could tell you if your custom approach was better, but if something like LINQ met the requirements, why bother writing your own classes in the first place? I don't mean to focus on LINQ here. I am sure that the JAVA world has something comparable, I just would like to know why some folks get so uncomfortable with the idea of using an abstraction that they themselves did not write. UPDATE As Euphoric pointed out, there isn't anything comparable to LINQ in the Java world. So, if you are developing on the .NET stack, why not always try and make use of it? Is it possible that people just don't fully understand what it does?

  Read the article

• Multicasting Windows 7 Image

  - by LawnChairSkank

  I am trying to deploy some new machines with windows 7 for the first time in our computer labs. We used to use third party imaging software and then run sysprep after the image was copied(XP), but it seems you can't go that route with windows 7. We set up a new imaging server with the windows system image manager, but when we try to multicast the image it pretty much takes down our whole staff and faculty network. I heard you can turn on a multicast feature on our cisco switches to help with the issue, but that it also slows the switches to a crawl. Another idea we have tried was pulling the the computer lab switch off the main network and plugging the imaging server directly into the computer lab switch so the multicast doesn't take down our network, but it doesn't seem to work without being able to hit a domain controller. Is there a way to multicast without taking out the network? I feel like I am missing something... Thanks in advance

  Read the article

• Dynamic Disk: Revert back to basic or...?

  - by someguy

  When I was trying to create a new partition (via Disk Management) it warned me that the disk would be dynamic, but I thought it meant the partition and went ahead. Now, my hard disk, which has the main C partition, is dynamic. I haven't shut down the computer, and I'm not sure what the consequences are. Should I revert back to basic or...? What ever happens, I don't want to lose my data. Edit: I think I should mention that I don't know how to revert back to basic...

  Read the article

• how to create java zip archives with a max file size limit [closed]

  - by Marci Casvan

  I need to write an algorithm in java (for an android app) to read a folder containing more folders and each of those containing images and audio files so the structure is this: mainDir/subfolders/myFile1.jpg It must be in java, something like perl script is not an option. It would preferably be for the compressed archive in order to squeeze as many files as possible before mailing the zip. Just a normal zip (no jar). My problem is that I need to limit the size of the archive to 16mb and at runtime, create as many archives as needed to contain all my files from my main mainDir folder. I tried several examples from the net, I read the java documentation, but I can't manage to understand and put it all together the way I need it. Has someone done this before or has a link or an example for me? I resolved the reading of the files with a recursive method but I can't write the logic for the zip creation I'm open for suggestions or better, a working example. EDIT: FileNotFoundException (no such file or directory) this was my initial post at Stack Overflow. I've got an answer to it, but I can't set the size of the ZipEntry and the logic doesn't work and also when extracting the my files from the zip I get the compression method not supported error.

  Read the article

• ODBC in SSIS 2012

  - by jamiet

  In August 2011 the SQL Server client team published a blog post entitled Microsoft is Aligning with ODBC for Native Relational Data Access in which they basically said "OLE DB is the past, ODBC is the future. Deal with it.". From that blog post:We encourage you to adopt ODBC in the development of your new and future versions of your application. You don’t need to change your existing applications using OLE DB, as they will continue to be supported on Denali throughout its lifecycle. While this gives you a large window of opportunity for changing your applications before the deprecation goes into effect, you may want to consider migrating those applications to ODBC as a part of your future roadmap.I recently undertook a project using SSIS2012 and heeded that advice by opting to use ODBC Connection Managers rather than OLE DB Connection Managers. Unfortunately my finding was that the ODBC Connection Manager is not yet ready for primetime use in SSIS 2012. The main issue I found was that you can't populate an Object variable with a recordset when using an Execute SQL Task connecting to an ODBC data source; any attempt to do so will result in an error:"Disconnected recordsets are not available from ODBC connections." I have filed a bug on Connect at ODBC Connection Manager does not have same funcitonality as OLE DB. For this reason I strongly recommend that you don't make the move to ODBC Connection Managers in SSIS just yet - best to wait for the next version of SSIS before doing that.I found another couple of issues with the ODBC Connection Manager that are worth keeping in mind:It doesn't recognise System Data Source Names (DSNs), only User DSNs (bug filed at ODBC System DSNs are not available in the ODBC Connection Manager)  UPDATE: According to a comment on that Connect item this may only be a problem on 64bit.In the OLE DB Connection Manager parameter ordinals are 0-based, in the ODBC Connection Manager they are 1-based (oh I just can't wait for the upgrade mess that ensues from this one!!!)You have been warned!@jamiet

  Read the article

• Mac OS X Snow Leopard hangs after login

  - by sleepyjames

  After restoring from backup following filesystem corruption my user account hangs after login (After entering my password the login window disappears and all I get is the background and a mouse pointer, no spinning wheel of death etc ..) I can login as a different user and then logout and login as my main account (sometimes!) but this is not consistant. I can login with safemode ok and have tried deleting /System/Caches, ~/Library/Caches and removing all my ~/Library/Preferences which worked once but not again. Does anyone have an any idea which logs I can look in, if any, to see whats happening after login or any other tips? I'm using 10.6.2. Cheers.

  Read the article

• Internet Explorer menu z-order problem [migrated]

  - by robgt

  I have what appears to be a z-order problem with Internet Explorer 9. It might be in other IE versions also, but not tested. I have to assume so. This page: http://www.modelhelicopters.co.uk/partsfinder/trex500esp/frames If you hover over the "All pages for this model" menu item on the parts finder menu bar (below the currency selector) - it should drop down a list of all the parts finder pages for the selected model helicopter. If you view the same page in IE or Chrome etc, you will see how it should appear. In IE9, the menu gets cut off at the top of the main exploded view image - suggesting the z-order is wrong. I have tried amending this with a jquery snippet but it didn't fix IE9. I know the code was inserted by jquery as shown by firebug in firefox. $j('div.std img[src*="/partsfinder/img"]').attr("style","position:relative;z-index:-100;"); I really do not know why this is not working.

  Read the article

• Ubuntu Boot Slow - Late Drive Access

  - by Mo2

  So I just installed Ubuntu on a brand new Samsung 840 Pro SSD and have noticed that it is slower than expected. The LED access light doesn't start blinking until after 20 seconds or so have passed, after which the boot up seems to actually start. Does anyone have any ideas as to why this is happening? I have Windows 7 installed on a separate SSD and use Windows Loader as the main loader. Windows Loader points to GRUB2, from which I then start Ubuntu up. The 20 seconds count that I mentioned earlier starts AFTER I select Ubuntu 14.04.1 from the GRUB2 menu. Any help is appreciated. EDIT: I forgot to mention that I have only one partition for / and /home. I intend on using a shared NTFS drive for my documents and other personal files, so I had no need for the /home. I did not make a /swap since I have 12 GB of RAM. I also did not make a /boot since I was told that it's not really necessary in my case.

  Read the article

< Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >