Search Results

Search found 18842 results on 754 pages for 'machine'.

Page 442/754 | < Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >

• Windows XP-Physical memory dumping

  - by Raghav Bali

  I have windows XP professional installed on my desktop. It shows up the following errors - Physical memory dumping blue screen. : This aint a new problem, i have been facing this problem ever since i bought this systme. initially the maintainence guy said it was a faulty hard drive and i have got it replaced 3 times already in the past 1 yr. The system gets utterly slow after a usage of around 2-3 months and then these errors crop up and i have to reinstall my windows to keep away these errors. But this time,its been only a week and the blue screen has come up 3 times. What can be the actual cause of the error?? Mine is an assembled machine, its a core 2duo with gigabyte motherboard and a 1 gb ram, 160 gb seagate hdd. please help me its a seriously annoying problem. Edit : A new error recent popprd up, what should i do now??

  Read the article

• How does bridged networking work?

  - by agz

  How does bridged networking work? I have looked through the virtualbox manuals but nothing extremely technical came up (It was just a generic gloss over of the topic) How does it assign a different ip to the virtual machine but uses the same network card? Why does this different ip (I found using ip addr under linux) not show up under the "attached devices section" of my router but I can port forward to it? How come if I connect to a password protected wifi network, it does not require me to enter my password? Is this multihoming?

  Read the article

• NET VIEW occasionally does not show all computers

  - by Neil

  I am having an issue on my workstation, where periodically the NET VIEW command does not seem to work. Most times, NET VIEW will return a list of all the machines connected to our domain. Occasionally, it will only list 4 or 5 (instead of the usual 200+). The only way I've found to remedy it is by rebooting my machine. I am running Windows XP Pro, the Domain Controller is running Server 2003. What could be causing this, and how can I remedy it? Thanks!

  Read the article

• Print spooler consumes over 1GB of memory

  - by Stephen Jennings

  Suddenly, on a Windows Vista Business workstation I manage, the Windows print spooler service is consuming over 1GB of memory. I got the call this morning that the user could not print. I discovered all printers were missing from the Printers applet in Control Panel. I rebooted the machine, and at first the printers were still missing, but after a few minutes (and much banging my head against the wall) they suddenly appeared. I stopped worrying about it until later today it happened again to the same workstation. To my knowledge, nothing has changed on the computer. No new printers have been added, no new print drivers would have been installed, and no new software is being used. I tried clearing out the spooler folder (C:\Windows\System32\spooler\printers) which did have four print jobs from this morning, but the problem persists after restarting the spooler service. When starting the service, it starts out using 824 KB of memory, then after about 20 seconds it starts creeping up about 10MB each second until it stabilizes around 1.8GB.

  Read the article

• Exchange 2003 Sending Double E-mails?

  - by Beuy

  Hello there, We have an exchange 2003 single-machine setup that is behaving very oddly. For various users it sends the same e-mail twice (I've checked the logs and each e-mail has a unique mail identifier which confirms that the problem is not the same e-mail being received twice, but it being sent twice) I've done a quick search and found tons of information regarding POP3/IMAP connectors etc, however these Employes are using Outlook 2003/2007 in Cached Mode. The Symantec AntiVirus for Mail is also not causing the issue, it's correctly scanning both e-mails coming through. Any ideas?

  Read the article

• Filemaker 10 Advanced sending email via script & SMTP

  - by Sean

  We are using a windows server box to run the databases but we have found via the headers that the emails are send from the local workstation. We have moved to a new email system and have set up a local linux server to securely send email out of our network to devices that do not support new protocols and encryption. But once we set up the script in filemaker 10 advanced (the local machine os x) we set it to the ip of our local box with no authentication but it does not send out an email. It creates a connection we see in the logs on the linux box but nothing more, additionally you can start a telnet connection with no issues. We have also made sure that there are no additional issue that we can see in our firewall policies. Any ideas where we should start? Does Filemaker 10 advanced log errors anywhere because I could not find any log files.

  Read the article

• How to protect Google Ads from yontoo layers runtime?

  - by Dharmavir

  Since sometime I have observed that Google Ads on any website including my blog (http://blogs.digitss.com) gets replaced with something similar to uploaded image below. I am sure it's happening with many people and that could reduce google adsense income. After some research I found that it is because "yontoo layers runtime" from http://www.yontoo.com/ (tagline says: Platform that allows you to control the websites you visit everyday.) but actually they are taking over. I am not sure with which software they are making a way into users computer but that seems very bad in terms of freedom of Internet and advt/marketing industry. I don't remember I have ever said "yes" to install yontoo on my computer. This piece of software is successful to install itself on my laptop/desktop and workstation at office. I am going to disable it now but the question is how do I make my websites aware of Yontoo Runtime and stop them from replacing Google Ads? Basically they are not able to replace all adsense ads but so far they are successfully replaced 1st instance of adsense advt and I am sure in future they will hit more. There could be 2 approaches 1) Fool yontoo runtime by putting some misleading divs in html document to save actual ads, 2) Completely disable yontoo by working out some client side script (javascript) which can fail/crash yontoo runtime and so will fail it's purpose of replacing ads. You can visit my blog (http://blogs.digitss.com) and see on top-right corner, if you find that google ad replaced with something similar to image attached with question - it means your computer/browser is infected too. Looking forward to reply from webmasters, if someone has already wrote some code/plugin to make website (and google ads) safe from yontoo or similar runtime. FYI: it was able to push this runtime in all browsers installed on machine. So a dangerous threat. And yes, I am just using Google ads - not sure if yontoo runtime is doing trick against other ad networks or not? I am sure they must be doing it with some handful of ad networks.

  Read the article

• How can I scan documents from a Lexmark x543n over the network on OS X 10.6

  - by Thomas Lötzer

  Hi, I just got a Lexmark x543dn and have some trouble getting my computer to recognize it as a scanner. The printer is working fine from my OS X 10.6 machine, setup was as easy as it gets. I just connected it to my network, gave it a name and added it under that name as a networked printer in OS X. According to the Apple support website, the driver in OS X (I upgraded to the newest drivers already) should also provide scanning capabilities. However when I run the image capture app included in OS X it tells me that there are no scanners available. Can anybody tell me what I have to do to get OS X to recognize the scanner? Thanks, Thomas

  Read the article

• 32-bit and 64-bit CPU/OS [closed]

  - by learnerforever

  Possible Duplicates: how to know if a computer is 32 bit or 64 bit 32-bit v/s 64-bit systems Hi, This 32-bit and 64-bit thing baffles me. It's not often that I run across it, but when I do, it baffles me. Like when I want to download software from http://www.google.com/ime/transliteration/ it asks me which version to download. I have win XP running on my thinkpad machine. How do I find out if my hardware is 32-bit or 64-bit. Also, how do I find if OS is 32-bit or 64-bit and thus how to know which version to download from this link. Also for any installed application say firefox, how do I know which bit version is installed. How popular are 64-bit hardware/OSs?. Are all the new CPUs and OSs supporting 64-bit and 32-bit for backwards compatible or 64-bit is still a luxury? Thanks,

  Read the article

• iptables forward rule not working in openwrt

  - by Udit Gupta

  I am trying to apply some iptables forwarding rules in openwrt. Here is my scenario - My server has two cards ath0 and br-lan. br-lan is connected to internet and ath0 to private network. The other m/c in n/w also has ath0 that connects with this server's ath0 and they are able to ping each other. Now, I want other m/c in network to use internet using br-lan of server so I thought of using iptables forwarding rule- Here is what I tried - Server : $ ping 1.1.1.6 // <ath0-ip of client> works fine $ iptables -A FORWARD -i ath0 -o br-lan -j ACCEPT $ /etc/init.d/firewall restart Client : $ ping 1.1.1.5 // <ath0-ip of server> works fine $ ping 132.245.244.60 // <br-lan ip of server> (not working) I am new to iptables stuff and openwrt. What I am doing wrong here ?? Any other help if anyone could suggest for my scenario Edit- m/c - machine n/w - network

  Read the article

• Mac OS X: pushing all traffic through a VMWare VM [closed]

  - by bj99

  I want to set up an Astaro (Sophos) UTM in a Virtual Machine. The Setup should be at the end the following: Cable Modem (one IP adress) | [Ethernet] Sophos UTM (running as VM [VMWare Fusion 5] on the MacMini) | [WIFI] Airport Express v2 (for sharing Local Network to wireless and wired clients) 1)| [WIFI] 2)| [Ethernet over Thunderbolt Ethernet Adapter]* Clients MacMini (Local File Server) *To have the Mini also protected behind the UTM So the setup process for the UTM works fine, but then the problems start: I just have one external IP (from my cable modem provider)== So if I put the VM in briged mode my Internet connection drops, because the MacMini also has its IP adress. If I put the VM to NAT mode the Mini itself is not protected by the UTM So: is there a way to hide the en0 interface(Ethernet) and the en1 interface (Wifi) from the MacMini, so that they not even appear in System Preferences Network section but are available to the VM? That way the Mini must connect to the en2 interface (Thunderbolt adapter) to make any Internet/LAN connection and I just use the given single IP from the Cable Modem. Thaks for any suggestions... Sebastian

  Read the article

• Windows Storage Server 2003 R2 RDP Disconnection

  - by Antitribu

  I am unable to remote desktop to our Windows Storage Server 2003 R2 machine. There are a few people about with similar issues but no answers around. Symantec End Point is installed but no network protection. Using rdesktop in Linux I receive: ERROR: send: Connection reset by peer NOT IMPLEMENTED: PDU 12 ERROR: Connection closed Where the "PDU XX" number changes on each connection. In windows using the latest mstsc I receive: The connection was lost due to a network error. Try connecting again. If the problem persists, contact your network Administrator. Any ideas?

  Read the article

• Unable to mount portable hard drive on Ubuntu

  - by VoY

  My portable hard drive (WD My Passport), which used to work correctly now does not automount on my Ubuntu system. It does work on a Windows machine or even when plugged into WD HD TV, which is a Linux based device. There's one NTFS partition spanning the whole drive. When I plug the disk in, I see the following in dmesg: [269259.504631] usb 1-2.2: new high speed USB device using ehci_hcd and address 20 [269259.604674] usb 1-2.2: configuration #1 chosen from 1 choice However it does not mount in GNOME and I don't see it when I type: sudo fdisk -l Any suggestions why this might be? I repaired the partition using chkdsk on Windows, so the issue is probably not filesystem related.

  Read the article

• Expanding Files 0%, error 0x80070017 Windows 7 x64 RTM

  - by Liam

  I have downloaded Windows 7 x64 from MSDN. I have checked the hash of the file and it is correct. I have them made a bootble USB stick (http://kmwoley.com/blog/?p=345 (had to use my vista bootsect.exe as running 32bit at the moment). When I boot from the USB it fails when expanding the file. It stays on 0% and fails after around 90 seconds. The error is 0x80070017. As the hash is correct and I am using USB I guess it could be a hardware problems. Any advice how to get Windows 7 installed? The machine is a Dell Studio Slim.

  Read the article

• Is MozyHome Remote Backup known to slow down Windows Explorer?

  - by Kyle Estes

  Windows Explorer on my home machine is uber slow, and I suspect it is Mozy's fault. In the past Mozy has done some goofy stuff like placing file and folder icon overlays in Windows Explorer, which was really bugging me because I thought they were from TortoiseSVN (and I had uninstalled that!). Anyhow, does anyone else have Mozy installed? Is Windows Explorer really slow respond for you, say when you simply double click the hard drive to browse files? I'd also welcome any tips people might have on debugging why Windows Explorer might be slow (shell extensions known to cause problems, etc.).

  Read the article

• Should you disable page file with SSD?

  - by Pyrolistical

  I've been reading http://serverfault.com/questions/23621/any-benefit-or-detriment-from-removing-a-pagefile-on-an-8gb-ram-machine, and it has a lot of great information. But assuming you have more than enough ram, I think page file should be disabled on SSD to extend the life time. I know you would lose the core dump on crash, but not many people need that information. From my understand without a page file as you reach the limit of your ram that might trigger thrashing on disk. But for SSDs there is no concept of thrashing, reads are fast. What do you guys think?

  Read the article

• Not able to connect to perforce server outside of localhost

  - by bobber205

  My setup is a Qwest PK5000 router with a Linksys router running Tomato. I have DMZ pointed towards my router. (The server is on the tomato router). I tried my applications that open up sockets and Utorrent (port 6883) and I ended having to do advanced port forwarding and forward specific ports in addition to having DMZ on my router. The problem is that I cannot connect to perforce when on another machine on the LAN or off. Any ideas? :) Thanks!

  Read the article

• UPS recommendations for three grey boxes?

  - by Margaret

  Hey all We have a series of grey-box style computers acting as servers at my workplace (rather than rack-mount). We were looking to get Uninterruptible Power Supplies for them. However, I'm not sure how many at what capacity are required. I'd assume it would be a good idea to hook the peripherals in as well - there's a 18.5" LCD monitor with a KVM, along with a couple of USB hard drives that require power. I currently have the most vital machine hooked up to a cheap (temporary) UPS, but it's probably close to worse than nothing. I'm looking for reasonable value for money, though I can probably negotiate with my boss on price range. I recognise that I may well need to buy two (or even three) UPSs to support the three machines. Any recommendations?

  Read the article

• Windows 7 - cancel mirror synchronisation

  - by Chris W

  I've got basic disk OS managed disk mirroring setup in Windows 7 for a couple of volumes. After a power failure the mirrors are currently resynching. These are only small volumes of data but the sync has not completed after more than 24 hours. Is there any way to stop this as it's driving me nuts? I need to get the machine back to a usable state to get some work done but it's a bit of a dog whilst this synch is going on. I've tried removing the mirrors but it won't let me do that whilst the re-sync is in progress.

  Read the article

• Windows 7 - cancel mirror synchronisation

  - by Chris W

  I've got basic disk OS managed disk mirroring setup in Windows 7 for a couple of volumes. After a power failure the mirrors are currently resynching. These are only small volumes of data but the sync has not completed after more than 24 hours. Is there any way to stop this as it's driving me nuts? I need to get the machine back to a usable state to get some work done but it's a bit of a dog whilst this synch is going on. I've tried removing the mirrors but it won't let me do that whilst the re-sync is in progress.

  Read the article

• Custom prompt doesn't work on Mac's terminal

  - by mareks

  I like to use a custom prompt (current path in blue) on my unix machine: export PS1='\[\e[0;34m\]\w \$\[\e[m\] ' But when I try to use it on Mac's terminal it doesn't work: it fails to detect the end of the prompt and overwrites the prompt when I type commands. This also happens when I'm inputting a long command where it wraps over the same line instead of starting a new line. I don't understand why this is the case since I use bash on both machines. Any suggestions on how to remedy this?

  Read the article

• XP Computer won't start (Missing/Corrupt 'System' file) - recently added new hard drive

  - by qwerty2

  Hi all, Pulling my hair out here. I recently replaced my D: 1TB drive (not a system drive) with a new 1.5TB drive. I loaded Windows XP, formatted the new drive and it was showing as working fine, alongside my C: windows system drive. I restart my machine and all of a sudden, Windows doesn't load and instead I get: "Windows could not start beause the following file is missing or corrupt" \WINDOWS\SYSTEM32\CONFIG\SYSTEM I don't have the original XP installation CD, although I do have another copy of XP, when I try and boot to it, I get the blue 'STOP' screen after it attempts to load the setup utlity for about a minute. Can someone please help? When I set up my new hard drive as a primary partition did this someone screw up my C: hard drive? Did it perhaps unmount it somehow? Any help would be fantastic. Thanks

  Read the article

• XP Computer won't start (Missing/Corrupt 'System' file) - recently added new hard drive

  - by qwerty2

  Hi all, Pulling my hair out here. I recently replaced my D: 1TB drive (not a system drive) with a new 1.5TB drive. I loaded Windows XP, formatted the new drive and it was showing as working fine, alongside my C: windows system drive. I restart my machine and all of a sudden, Windows doesn't load and instead I get: "Windows could not start beause the following file is missing or corrupt" \WINDOWS\SYSTEM32\CONFIG\SYSTEM I don't have the original XP installation CD, although I do have another copy of XP, when I try and boot to it, I get the blue 'STOP' screen after it attempts to load the setup utlity for about a minute. Can someone please help? When I set up my new hard drive as a primary partition did this someone screw up my C: hard drive? Did it perhaps unmount it somehow? Any help would be fantastic. Thanks

  Read the article

• Accenture Foundation Platform for Oracle (AFPO) – Your pre-build & tested middleware platform

  - by JuergenKress

  The Accenture Foundation Platform for Oracle (AFPO) is a pre-built, tested reference application, common services framework and development accelerator for Oracle’s Fusion Middleware 11g product suite that can help to reduce development time and cost by up to 30 percent. AFPO is a unique accelerator that includes documentation, day one deliverables and quick start virtual machine images, along with access to a skilled team of resources, to reduce risk and cost while improving project quality. It can be delivered all at once or in stages, on-site, hosted, or as a cloud solution. Accenture recently released AFPO v5 for use with their clients. Accenture added significant updates in v5 including Day 1 images & documentation for Webcenter & ADF Mobile that are integrated with 30 other Oracle Middleware products that signifigantly reduced the services aspect to standing these products up. AFPO v5 also features rapid configuration and implementation capabilities for SOA/BPM integrated with Oracle WebCenter Portal, Oracle WebCenter Content, Oracle Business Intelligence, Oracle Identity Management and Oracle ADF Mobile.  AFPO v5 also delivers a starter kit for Oracle SOA Suite which builds upon the integration methodology, leading practices and extended tooling contained within the Oracle Foundation Pack. The combination of the AFPO starter kit and Foundation Pack jump-start and streamline Oracle SOA Suite implementation initiatives, helping to reduce the risk of deploying new technologies and making architectural decisions, so clients can ultimately reduce cost, risk and the time needed for an implementation.  You'll find more information at: Accenture's website:  www.accenture.com/afpo YouTube AFPO Telestration:  http://www.youtube.com/watch?v=_x429DcHEJs Press Release Brochure Contacts: [email protected] Patrick J Sullivan (Accenture – Global Oracle Technology Lead), [email protected] SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit  www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Technorati Tags: AFPO,Accenture,middleware platform,oracle middleware,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• How to make a legacy system time-zone sensitive?

  - by Jerry Dodge

  I need to implement time zones in a very large and old Delphi system, where there's a central SQL Server database and possibly hundreds of client installations around the world in different time zones. The application already interacts with the database by only using the date/time of the database server. So, all the time stamps saved in both the database and on the client machines are the date/time of the database server when it happened, never the time of the client machine. So, when a client is about to display the date/time of something (such as a transaction) which is coming from this database, it needs to show the date/time converted to the local time zone. This is where I get lost. I would naturally assume there should be something in SQL to recognize the time zone and convert a DateTime field dynamically. I'm not sure if such a thing exists though. If so, that would be perfect, but if not, I need to figure out another way. This Delphi system (multiple projects) utilizes the SQL Server database using ADO components, VCL data-aware controls, and QuickReports (using data sources). So, there's many places where the data goes directly from the database query to rendering on the screen, without any code to actually put this data on the screen. In the end, I need to know when and how should I get the properly converted time? What is the proper way to ensure that I handle Dates and Times correctly in a legacy application?

  Read the article

< Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >