Search Results

Search found 12375 results on 495 pages for 'red black tree'.

Page 443/495 | < Previous Page | 439 440 441 442 443 444 445 446 447 448 449 450  | Next Page >

• How to restore your production database without needing additional storage

  - by David Atkinson

  Production databases can get very large. This in itself is to be expected, but when a copy of the database is needed the database must be restored, requiring additional and costly storage.  For example, if you want to give each developer a full copy of your production server, you'll need n times the storage cost for your n-developer team. The same is true for any test databases that are created during the course of your project lifecycle. If you've read my previous blog posts, you'll be aware that I've been focusing on the database continuous integration theme. In my CI setup I create a "production"-equivalent database directly from its source control representation, and use this to test my upgrade scripts. Despite this being a perfectly valid and practical thing to do as part of a CI setup, it's not the exact equivalent to running the upgrade script on a copy of the actual production database. So why shouldn't I instead simply restore the most recent production backup as part of my CI process? There are two reasons why this would be impractical. 1. My CI environment isn't an exact copy of my production environment. Indeed, this would be the case in a perfect world, and it is strongly recommended as a good practice if you follow Jez Humble and David Farley's "Continuous Delivery" teachings, but in practical terms this might not always be possible, especially where storage is concerned. It may just not be possible to restore a huge production database on the environment you've been allotted. 2. It's not just about the storage requirements, it's also the time it takes to do the restore. The whole point of continuous integration is that you are alerted as early as possible whether the build (yes, the database upgrade script counts!) is broken. If I have to run an hour-long restore each time I commit a change to source control I'm just not going to get the feedback quickly enough to react. So what's the solution? Red Gate has a technology, SQL Virtual Restore, that is able to restore a database without using up additional storage. Although this sounds too good to be true, the explanation is quite simple (although I'm sure the technical implementation details under the hood are quite complex!) Instead of restoring the backup in the conventional sense, SQL Virtual Restore will effectively mount the backup using its HyperBac technology. It creates a data and log file, .vmdf, and .vldf, that becomes the delta between the .bak file and the virtual database. This means that both read and write operations are permitted on a virtual database as from SQL Server's point of view it is no different from a conventional database. Instead of doubling the storage requirements upon a restore, there is no 'duplicate' storage requirements, other than the trivially small virtual log and data files (see illustration below). The benefit is magnified the more databases you mount to the same backup file. This technique could be used to provide a large development team a full development instance of a large production database. It is also incredibly easy to set up. Once SQL Virtual Restore is installed, you simply run a conventional RESTORE command to create the virtual database. This is what I have running as part of a nightly "release test" process triggered by my CI tool. RESTORE DATABASE WidgetProduction_virtual FROM DISK=N'C:\WidgetWF\ProdBackup\WidgetProduction.bak' WITH MOVE N'WidgetProduction' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_WidgetProduction_Virtual.vmdf', MOVE N'WidgetProduction_log' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_log_WidgetProduction_Virtual.vldf', NORECOVERY, STATS=1, REPLACE GO RESTORE DATABASE mydatabase WITH RECOVERY   Note the only change from what you would do normally is the naming of the .vmdf and .vldf files. SQL Virtual Restore intercepts this by monitoring the extension and applies its magic, ensuring the 'virtual' restore happens rather than the conventional storage-heavy restore. My automated release test then applies the upgrade scripts to the virtual production database and runs some validation tests, giving me confidence that were I to run this on production for real, all would go smoothly. For illustration, here is my 8Gb production database: And its corresponding backup file: Here are the .vldf and .vmdf files, which represent the only additional used storage for the new database following the virtual restore.   The beauty of this product is its simplicity. Once it is installed, the interaction with the backup and virtual database is exactly the same as before, as the clever stuff is being done at a lower level. SQL Virtual Restore can be downloaded as a fully functional 14-day trial. Technorati Tags: SQL Server

  Read the article

• Driver error when using multiple shaders

  - by Jinxi

  I'm using 3 different shaders: a tessellation shader to use the tessellation feature of DirectX11 :) a regular shader to show how it would look without tessellation and a text shader to display debug-info such as FPS, model count etc. All of these shaders are initialized at the beginning. Using the keyboard, I can switch between the tessellation shader and regular shader to render the scene. Additionally, I also want to be able toggle the display of debug-info using the text shader. Since implementing the tessellation shader the text shader doesn't work anymore. When I activate the DebugText (rendered using the text-shader) my screens go black for a while, and Windows displays the following message: Display Driver stopped responding and has recovered This happens with either of the two shaders used to render the scene. Additionally: I can start the application using the regular shader to render the scene and then switch to the tessellation shader. If I try to switch back to the regular shader I get the same error as with the text shader. What am I doing wrong when switching between shaders? What am I doing wrong when displaying text at the same time? What file can I post to help you help me? :) thx P.S. I already checked if my keyinputs interrupt at the wrong time (during render or so..), but that seems to be ok Testing Procedure Regular Shader without text shader Add text shader to Regular Shader by keyinput (works now, I built the text shader back to only vertex and pixel shader) (somthing with the z buffer is stil wrong...) Remove text shader, then change shader to Tessellation Shader by key input Then if I add the Text Shader or switch back to the Regular Shader Switching/Render Shader Here the code snipet from the Renderer.cpp where I choose the Shader according to the boolean "m_useTessellationShader": if(m_useTessellationShader) { // Render the model using the tesselation shader ecResult = m_ShaderManager->renderTessellationShader(m_D3D->getDeviceContext(), meshes[lod_level]->getIndexCount(), worldMatrix, viewMatrix, projectionMatrix, textures, texturecount, m_Light->getDirection(), m_Light->getAmbientColor(), m_Light->getDiffuseColor(), (D3DXVECTOR3)m_Camera->getPosition(), TESSELLATION_AMOUNT); } else { // todo: loaded model depends on distance to camera // Render the model using the light shader. ecResult = m_ShaderManager->renderShader(m_D3D->getDeviceContext(), meshes[lod_level]->getIndexCount(), lod_level, textures, texturecount, m_Light->getDirection(), m_Light->getAmbientColor(), m_Light->getDiffuseColor(), worldMatrix, viewMatrix, projectionMatrix); } And here the code snipet from the Mesh.cpp where I choose the Typology according to the boolean "useTessellationShader": // RenderBuffers is called from the Render function. The purpose of this function is to set the vertex buffer and index buffer as active on the input assembler in the GPU. Once the GPU has an active vertex buffer it can then use the shader to render that buffer. void Mesh::renderBuffers(ID3D11DeviceContext* deviceContext, bool useTessellationShader) { unsigned int stride; unsigned int offset; // Set vertex buffer stride and offset. stride = sizeof(VertexType); offset = 0; // Set the vertex buffer to active in the input assembler so it can be rendered. deviceContext->IASetVertexBuffers(0, 1, &m_vertexBuffer, &stride, &offset); // Set the index buffer to active in the input assembler so it can be rendered. deviceContext->IASetIndexBuffer(m_indexBuffer, DXGI_FORMAT_R32_UINT, 0); // Check which Shader is used to set the appropriate Topology // Set the type of primitive that should be rendered from this vertex buffer, in this case triangles. if(useTessellationShader) { deviceContext->IASetPrimitiveTopology(D3D11_PRIMITIVE_TOPOLOGY_3_CONTROL_POINT_PATCHLIST); }else{ deviceContext->IASetPrimitiveTopology(D3D11_PRIMITIVE_TOPOLOGY_TRIANGLELIST); } return; } RenderShader Could there be a problem using sometimes only vertex and pixel shader and after switching using vertex, hull, domain and pixel shader? Here a little overview of my architecture: TextClass: uses font.vs and font.ps deviceContext-VSSetShader(m_vertexShader, NULL, 0); deviceContext-PSSetShader(m_pixelShader, NULL, 0); deviceContext-PSSetSamplers(0, 1, &m_sampleState); RegularShader: uses vertex.vs and pixel.ps deviceContext-VSSetShader(m_vertexShader, NULL, 0); deviceContext-PSSetShader(m_pixelShader, NULL, 0); deviceContext-PSSetSamplers(0, 1, &m_sampleState); TessellationShader: uses tessellation.vs, tessellation.hs, tessellation.ds, tessellation.ps deviceContext-VSSetShader(m_vertexShader, NULL, 0); deviceContext-HSSetShader(m_hullShader, NULL, 0); deviceContext-DSSetShader(m_domainShader, NULL, 0); deviceContext-PSSetShader(m_pixelShader, NULL, 0); deviceContext-PSSetSamplers(0, 1, &m_sampleState); ClearState I'd like to switch between 2 shaders and it seems they have different context parameters, right? In clearstate methode it says it resets following params to NULL: I found following in my Direct3D Class: depth-stencil state - m_deviceContext-OMSetDepthStencilState rasterizer state - m_deviceContext-RSSetState(m_rasterState); blend state - m_device-CreateBlendState viewports - m_deviceContext-RSSetViewports(1, &viewport); I found following in every Shader Class: input/output resource slots - deviceContext-PSSetShaderResources shaders - deviceContext-VSSetShader to - deviceContext-PSSetShader input layouts - device-CreateInputLayout sampler state - device-CreateSamplerState These two I didn't understand, where can I find them? predications - ? scissor rectangles - ? Do I need to store them all localy so I can switch between them, because it doesn't feel right to reinitialize the Direct3d and the Shaders by every switch (key input)?!

  Read the article

• ORACLE RIGHTNOW DYNAMIC AGENT DESKTOP CLOUD SERVICE - Putting the Dynamite into Dynamic Agent Desktop

  - by Andreea Vaduva

  Untitled Document There’s a mountain of evidence to prove that a great contact centre experience results in happy, profitable and loyal customers. The very best Contact Centres are those with high first contact resolution, customer satisfaction and agent productivity. But how many companies really believe they are the best? And how many believe that they can be? We know that with the right tools, companies can aspire to greatness – and achieve it. Core to this is ensuring their agents have the best tools that give them the right information at the right time, so they can focus on the customer and provide a personalised, professional and efficient service. Today there are multiple channels through which customers can communicate with you; phone, web, chat, social to name a few but regardless of how they communicate, customers expect a seamless, quality experience. Most contact centre agents need to switch between lots of different systems to locate the right information. This hampers their productivity, frustrates both the agent and the customer and increases call handling times. With this in mind, Oracle RightNow has designed and refined a suite of add-ins to optimize the Agent Desktop. Each is designed to simplify and adapt the agent experience for any given situation and unify the customer experience across your media channels. Let’s take a brief look at some of the most useful tools available and see how they make a difference. Contextual Workspaces: The screen where agents do their job. Agents don’t want to be slowed down by busy screens, scrolling through endless tabs or links to find what they’re looking for. They want quick, accurate and easy. Contextual Workspaces are fully configurable and through workspace rules apply if, then, else logic to display only the information the agent needs for the issue at hand . Assigned at the Profile level, different levels of agent, from a novice to the most experienced, get a screen that is relevant to their role and responsibilities and ensures their job is done quickly and efficiently the first time round. Agent Scripting: Sometimes, agents need to deliver difficult or sensitive messages while maximising the opportunity to cross-sell and up-sell. After all, contact centres are now increasingly viewed as revenue generators. Containing sophisticated branching logic, scripting helps agents to capture the right level of information and guides the agent step by step, ensuring no mistakes, inconsistencies or missed opportunities. Guided Assistance: This is typically used to solve common troubleshooting issues, displaying a series of question and answer sets in a decision-tree structure. This means agents avoid having to bookmark favourites or rely on written notes. Agents find particular value in these guides - to quickly craft chat and email responses. What’s more, by publishing guides in answers on support pages customers, can resolve issues themselves, without needing to contact your agents. And b ecause it can also accelerate agent ramp-up time, it ensures that even novice agents can solve customer problems like an expert. Desktop Workflow: Take a step back and look at the full customer interaction of your agents. It probably spans multiple systems and multiple tasks. With Desktop Workflows you control the design workflows that span the full customer interaction from start to finish. As sequences of decisions and actions, workflows are unique in that they can create or modify different records and provide automation behind the scenes. This means your agents can save time and provide better quality of service by having the tools they need and the relevant information as required. And doing this boosts satisfaction among your customers, your agents and you – so win, win, win! I have highlighted above some of the tools which can be used to optimise the desktop; however, this is by no means an exhaustive list. In approaching your design, it’s important to understand why and how your customers contact you in the first place. Once you have this list of “whys” and “hows”, you can design effective policies and procedures to handle each category of problem, and then implement the right agent desktop user interface to support them. This will avoid duplication and wasted effort. Five Top Tips to take away: Start by working out “why” and “how” customers are contacting you. Implement a clean and relevant agent desktop to support your agents. If your workspaces are getting complicated consider using Desktop Workflow to streamline the interaction. Enhance your Knowledgebase with Guides. Agents can access them proactively and can be published on your web pages for customers to help themselves. Script any complex, critical or sensitive interactions to ensure consistency and accuracy. Desktop optimization is an ongoing process so continue to monitor and incorporate feedback from your agents and your customers to keep your Contact Centre successful.   Want to learn more? Having attending the 3-day Oracle RightNow Customer Service Administration class your next step is to attend the Oracle RightNow Customer Portal Design and 2-day Dynamic Agent Desktop Administration class. Here you’ll learn not only how to leverage the Agent Desktop tools but also how to optimise your self-service pages to enhance your customers’ web experience.   Useful resources: Review the Best Practice Guide Review the tune-up guide   About the Author: Angela Chandler joined Oracle University as a Senior Instructor through the RightNow Customer Experience Acquisition. Her other areas of expertise include Business Intelligence and Knowledge Management.  She currently delivers the following Oracle RightNow courses in the classroom and as a Live Virtual Class: RightNow Customer Service Administration (3 days) RightNow Customer Portal Design and Dynamic Agent Desktop Administration (2 days) RightNow Analytics (2 days) Rightnow Chat Cloud Service Administration (2 days)

  Read the article

• Switching the layout in Orchard CMS

  - by Bertrand Le Roy

  The UI composition in Orchard is extremely flexible, thanks in no small part to the usage of dynamic Clay shapes. Every notable UI construct in Orchard is built as a shape that other parts of the system can then party on and modify any way they want. Case in point today: modifying the layout (which is a shape) on the fly to provide custom page structures for different parts of the site. This might actually end up being built-in Orchard 1.0 but for the moment it’s not in there. Plus, it’s quite interesting to see how it’s done. We are going to build a little extension that allows for specialized layouts in addition to the default layout.cshtml that Orchard understands out of the box. The extension will add the possibility to add the module name (or, in MVC terms, area name) to the template name, or module and controller names, or module, controller and action names. For example, the home page is served by the HomePage module, so with this extension you’ll be able to add an optional layout-homepage.cshtml file to your theme to specialize the look of the home page while leaving all other pages using the regular layout.cshtml. I decided to implement this sample as a theme with code. This way, the new overrides are only enabled as the theme is activated, which makes a lot of sense as this is going to be where you’ll be creating those additional layouts. The first thing I did was to create my own theme, derived from the default TheThemeMachine with this command: codegen theme CustomLayoutMachine /CreateProject:true /IncludeInSolution:true /BasedOn:TheThemeMachine .csharpcode, .csharpcode pre { font-size: 12px; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Once that was done, I worked around a known bug and moved the new project from the Modules solution folder into Themes (the code was already physically in the right place, this is just about Visual Studio editing). The CreateProject flag in the command-line created a project file for us in the theme’s folder. This is only necessary if you want to run code outside of views from that theme. The code that we want to add is the following LayoutFilter.cs: using System.Linq; using System.Web.Mvc; using System.Web.Routing; using Orchard; using Orchard.Mvc.Filters; namespace CustomLayoutMachine.Filters { public class LayoutFilter : FilterProvider, IResultFilter { private readonly IWorkContextAccessor _wca; public LayoutFilter(IWorkContextAccessor wca) { _wca = wca; } public void OnResultExecuting(ResultExecutingContext filterContext) { var workContext = _wca.GetContext(); var routeValues = filterContext.RouteData.Values; workContext.Layout.Metadata.Alternates.Add( BuildShapeName(routeValues, "area")); workContext.Layout.Metadata.Alternates.Add( BuildShapeName(routeValues, "area", "controller")); workContext.Layout.Metadata.Alternates.Add( BuildShapeName(routeValues, "area", "controller", "action")); } public void OnResultExecuted(ResultExecutedContext filterContext) { } private static string BuildShapeName( RouteValueDictionary values, params string[] names) { return "Layout__" + string.Join("__", names.Select(s => ((string)values[s] ?? "").Replace(".", "_"))); } } } This filter is intercepting ResultExecuting, which is going to provide a context object out of which we can extract the route data. We are also injecting an IWorkContextAccessor dependency that will give us access to the current Layout object, so that we can add alternate shape names to its metadata. We are adding three possible shape names to the default, with different combinations of area, controller and action names. For example, a request to a blog post is going to be routed to the “Orchard.Blogs” module’s “BlogPost” controller’s “Item” action. Our filters will then add the following shape names to the default “Layout”: Layout__Orchard_Blogs Layout__Orchard_Blogs__BlogPost Layout__Orchard_Blogs__BlogPost__Item Those template names get mapped into the following file names by the system (assuming the Razor view engine): Layout-Orchard_Blogs.cshtml Layout-Orchard_Blogs-BlogPost.cshtml Layout-Orchard_Blogs-BlogPost-Item.cshtml This works for any module/controller/action of course, but in the sample I created Layout-HomePage.cshtml (a specific layout for the home page), Layout-Orchard_Blogs.cshtml (a layout for all the blog views) and Layout-Orchard_Blogs-BlogPost-Item.cshtml (a layout that is specific to blog posts). Of course, this is just an example, and this kind of dynamic extension of shapes that you didn’t even create in the first place is highly encouraged in Orchard. You don’t have to do it from a filter, we only did it this way because that was a good place where we could get the context that we needed. And of course, you can base your alternate shape names on something completely different from route values if you want. For example, you might want to create your own part that modifies the layout for a specific content item, or you might want to do it based on the raw URL (like it’s done in widget rules) or who knows what crazy custom rule. The point of all this is to show that extending or modifying shapes is easy, and the layout just happens to be a shape. In other words, you can do whatever you want. Ain’t that nice? The custom theme can be found here: Orchard.Theme.CustomLayoutMachine.1.0.nupkg Many thanks to Louis, who showed me how to do this.

  Read the article

• Camera Projection back Into 3D world, offset error

  - by Anthony

  I'm using XNA to simulate a robot in a 3D world and then do image analysis on what the camera sees. I have my camera looking down in front of the direction that the robot is going, and I have the robot detecting white pixels. I'm trying to take the white pixels that it finds and project them back into the 3D world so that I can see if it is actually detecting the correct pixels. I almost have it working, but there is an offset between where the white is in in the World and were I put my orange triangles (which represent what the robot things is white). /// <summary> /// Takes a bool map of and makes vertex positions based on the map. /// </summary> /// <param name="c"> The bool map</param> private void ProjectBoolMapOnGroundAnthony2(bool[,] c) { float triangleSize = 0.04f; // Point of interest in World W cordinate system. Vector3 pointOfInterest_W = Vector3.Zero; // Point of interest in Robot Cordinate system R Vector3 pointOfInterest_R = Vector3.Zero; // alpha is the angle from the robot camera to where it is looking in the center. //double alpha = Math.Atan(1.8f / 1); /// Matrix representation of the view determined by the position, target, and updirection. Matrix View = ((SimulationMain)Game).mainRobot.robotCameraView.View; /// Matrix representation of the view determined by the angle of the field of view (Pi/4), aspectRatio, nearest plane visible (1), and farthest plane visible (1200) Matrix Projection = ((SimulationMain)Game).mainRobot.robotCameraView.Projection; /// Matrix representing how the real world cordinates differ from that of the rendering by the camera. Matrix World = ((SimulationMain)Game).mainRobot.robotCameraView.World; Plane groundPlan = new Plane(Vector3.UnitZ, 0.0f); for (int x = 0; x < this.screenWidth; x++) { for (int y = 0; y < this.screenHeight; ) { if (c[x, y] == true && this.count1D < 62000) { int j = 1; Vector3 nearPlanePoint = Game.GraphicsDevice.Viewport.Unproject(new Vector3(x, y, 0), Projection, View, World); Vector3 farPlanePoint = Game.GraphicsDevice.Viewport.Unproject(new Vector3(x, y, 1), Projection, View, World); //Vector3 pointOfInterest_W = Vector3.in Ray ray = new Ray(nearPlanePoint, farPlanePoint); pointOfInterest_W = ray.Position + ray.Direction * (float) ray.Intersects(groundPlan); this.vertexArray2[this.count1D + 0].Position.X = pointOfInterest_W.X - triangleSize; this.vertexArray2[this.count1D + 0].Position.Y = pointOfInterest_W.Y - triangleSize * j; this.vertexArray2[this.count1D + 0].Position.Z = pointOfInterest_W.Z; this.vertexArray2[this.count1D + 0].Color = Color.DarkOrange; // Put another vertex a the position but +1 in the X direction triangleSize //this.vertexArray2[this.count1D + 1].Position.X = pointOnGroud.X + 3; //this.vertexArray2[this.count1D + 1].Position.Y = pointOnGroud.Y + j; this.vertexArray2[this.count1D + 1].Position.X = pointOfInterest_W.X; this.vertexArray2[this.count1D + 1].Position.Y = pointOfInterest_W.Y + triangleSize * j; this.vertexArray2[this.count1D + 1].Position.Z = pointOfInterest_W.Z; this.vertexArray2[this.count1D + 1].Color = Color.Red; // Put another vertex a the position but +1 in the X direction //this.vertexArray2[this.count1D + 0].Position.X = pointOnGroud.X; //this.vertexArray2[this.count1D + 0].Position.Y = pointOnGroud.Y + 3 + j; this.vertexArray2[this.count1D + 2].Position.X = pointOfInterest_W.X + triangleSize; this.vertexArray2[this.count1D + 2].Position.Y = pointOfInterest_W.Y - triangleSize * j; this.vertexArray2[this.count1D + 2].Position.Z = pointOfInterest_W.Z; this.vertexArray2[this.count1D + 2].Color = Color.Orange; this.count1D += 3; y += j; } else { y++; } } } } The world is a grass texture with lines on it. The world plane is normal at (0,0,1). Any ideas on why there is an offset? Any Ideas? Thanks for the help, Anthony G.

  Read the article

• Goodbye XML&hellip; Hello YAML (part 2)

  - by Brian Genisio's House Of Bilz

  Part 1 After I explained my motivation for using YAML instead of XML for my data, I got a lot of people asking me what type of tooling is available in the .Net space for consuming YAML.  In this post, I will discuss a nice tooling option as well as describe some small modifications to leverage the extremely powerful dynamic capabilities of C# 4.0.  I will be referring to the following YAML file throughout this post Recipe: Title: Macaroni and Cheese Description: My favorite comfort food. Author: Brian Genisio TimeToPrepare: 30 Minutes Ingredients: - Name: Cheese Quantity: 3 Units: cups - Name: Macaroni Quantity: 16 Units: oz Steps: - Number: 1 Description: Cook the macaroni - Number: 2 Description: Melt the cheese - Number: 3 Description: Mix the cooked macaroni with the melted cheese Tooling It turns out that there are several implementations of YAML tools out there.  The neatest one, in my opinion, is YAML for .NET, Visual Studio and Powershell.  It includes a great editor plug-in for Visual Studio as well as YamlCore, which is a parsing engine for .Net.  It is in active development still, but it is certainly enough to get you going with YAML in .Net.  Start by referenceing YamlCore.dll, load your document, and you are on your way.  Here is an example of using the parser to get the title of the Recipe: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var title = recipe["Title"] as string; In a similar way, you can access data in the Ingredients set: var yaml = YamlLanguage.FileTo("Data.yaml") as Hashtable; var recipe = yaml["Recipe"] as Hashtable; var ingredients = recipe["Ingredients"] as ArrayList; foreach (Hashtable ingredient in ingredients) { var name = ingredient["Name"] as string; } You may have noticed that YamlCore uses non-generic Hashtables and ArrayLists.  This is because YamlCore was designed to work in all .Net versions, including 1.0.  Everything in the parsed tree is one of two things: Hashtable, ArrayList or Value type (usually String).  This translates well to the YAML structure where everything is either a Map, a Set or a Value.  Taking it further Personally, I really dislike writing code like this.  Years ago, I promised myself to never write the words Hashtable or ArrayList in my .Net code again.  They are ugly, mostly depreciated collections that existed before we got generics in C# 2.0.  Now, especially that we have dynamic capabilities in C# 4.0, we can do a lot better than this.  With a relatively small amount of code, you can wrap the Hashtables and Array lists with a dynamic wrapper (wrapper code at the bottom of this post).  The same code can be re-written to look like this: dynamic doc = YamlDoc.Load("Data.yaml"); var title = doc.Recipe.Title; And dynamic doc = YamlDoc.Load("Data.yaml"); foreach (dynamic ingredient in doc.Recipe.Ingredients) { var name = ingredient.Name; } I significantly prefer this code over the previous.  That’s not all… the magic really happens when we take this concept into WPF.  With a single line of code, you can bind to the data dynamically in the view: DataContext = YamlDoc.Load("Data.yaml"); Then, your XAML is extremely straight-forward (Nothing else.  No static types, no adapter code.  Nothing): <StackPanel> <TextBlock Text="{Binding Recipe.Title}" /> <TextBlock Text="{Binding Recipe.Description}" /> <TextBlock Text="{Binding Recipe.Author}" /> <TextBlock Text="{Binding Recipe.TimeToPrepare}" /> <TextBlock Text="Ingredients:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Ingredients}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Quantity}" /> <TextBlock Text=" " /> <TextBlock Text="{Binding Units}" /> <TextBlock Text=" of " /> <TextBlock Text="{Binding Name}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> <TextBlock Text="Steps:" FontWeight="Bold" /> <ItemsControl ItemsSource="{Binding Recipe.Steps}" Margin="10,0,0,0"> <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Number}" /> <TextBlock Text=": " /> <TextBlock Text="{Binding Description}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </ItemsControl> </StackPanel> This nifty XAML binding trick only works in WPF, unfortunately.  Silverlight handles binding differently, so they don’t support binding to dynamic objects as of late (March 2010).  This, in my opinion, is a major lacking feature in Silverlight and I really hope we will see this feature available to us in Silverlight 4 Release.  (I am not very optimistic for Silverlight 4, but I can hope for the feature in Silverlight 5, can’t I?) Conclusion I still have a few things I want to say about using YAML in the .Net space including de-serialization and using IronRuby for your YAML parser, but this post is hopefully enough to see how easy it is to incorporate YAML documents in your code. Codeplex Site for YAML tools Dynamic wrapper for YamlCore

  Read the article

• Demystified - BI in SharePoint 2010

  - by Sahil Malik

  Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). Frequently, my clients ask me if there is a good guide on deciphering the seemingly daunting choice of products from Microsoft when it comes to business intelligence offerings in a SharePoint 2010 world. These are all described in detail in my book, but here is a one (well maybe two) page executive overview. Microsoft Excel: Yes, Microsoft Excel! Your favorite and most commonly used in the world database. No it isn’t a database in technical pure definitions, but this is the most commonly used ‘database’ in the world. You will find many business users craft up very compelling excel sheets with tonnes of logic inside them. Good for: Quick Ad-Hoc reports. Excel 64 bit allows the possibility of very large datasheets (Also see 32 bit vs 64 bit Office, and PowerPivot Add-In below). Audience: End business user can build such solutions. Related technologies: PowerPivot, Excel Services Microsoft Excel with PowerPivot Add-In: The powerpivot add-in is an extension to Excel that adds support for large-scale data. Think of this as Excel with the ability to deal with very large amounts of data. It has an in-memory data store as an option for Analysis services. Good for: Ad-hoc reporting and logic with very large amounts of data. Audience: End business user can build such solutions. Related technologies: Excel, and Excel Services Excel Services: Excel Services is a Microsoft SharePoint Server 2010 shared service that brings the power of Excel to SharePoint Server by providing server-side calculation and browser-based rendering of Excel workbooks. Thus, excel sheets can be created by end users, and published to SharePoint server – which are then rendered right through the browser in read-only or parameterized-read-only modes. They can also be accessed by other software via SOAP or REST based APIs. Good for: Sharing excel sheets with a larger number of people, while maintaining control/version control etc. Sharing logic embedded in excel sheets with other software across the organization via REST/SOAP interfaces Audience: End business users can build such solutions once your tech staff has setup excel services on a SharePoint server instance. Programmers can write software consuming functionality/complex formulae contained in your sheets. Related technologies: PerformancePoint Services, Excel, and PowerPivot. Visio Services: Visio Services is a shared service on the Microsoft SharePoint Server 2010 platform that allows users to share and view Visio diagrams that may or may not have data connected to them. Connected data can update these diagrams allowing a visual/graphical view into the data. The diagrams are viewable through the browser. They are rendered in silverlight, but will automatically down-convert to .png formats. Good for: Showing data as diagrams, live updating. Comes with a developer story. Audience: End business users can build such solutions once your tech staff has setup visio services on a SharePoint server instance. Developers can enhance the visualizations Related Technologies: Visio Services can be used to render workflow visualizations in SP2010 Reporting Services: SQL Server reporting services can integrate with SharePoint, allowing you to store reports and data sources in SharePoint document libraries, and render these reports and associated functionality such as subscriptions through a SharePoint site. In SharePoint 2010, you can also write reports against SharePoint lists (access services uses this technique). Good for: Showing complex reports running in a industry standard data store, such as SQL server. Audience: This is definitely developer land. Don’t expect end users to craft up reports, unless a report model has previously been published. Related Technologies: PerformancePoint Services PerformancePoint Services: PerformancePoint Services in SharePoint 2010 is now fully integrated with SharePoint, and comes with features that can either be used in the BI center site definition, or on their own as activated features in existing site collections. PerformancePoint services allows you to build reports and dashboards that target a variety of back-end datasources including: SQL Server reporting services, SQL Server analysis services, SharePoint lists, excel services, simple tables, etc. Using these you have the ability to create dashboards, scorecards/kpis, and simple reports. You can also create reports targeting hierarchical multidimensional data sources. The visual decomposition tree is a new report type that lets you quickly breakdown multi-dimensional data. Good for: Mostly everything :), except your wallet – it’s not free! But this is the most comprehensive offering. If you have SharePoint server, forget everything and go with performance point. Audience: Developers need to setup the back-end sources, manageability story. DBAs need to setup datawarehouses with cubes. Moderately sophisticated business users, or developers can craft up reports using dashboard designer which is a click-once App that deploys with PerformancePoint Related Technologies: Excel services, reporting services, etc.   Other relevant technologies to know about: Business Connectivity Services: Allows for consumption of external data in SharePoint as columns or external lists. This can be paired with one or more of the above BI offerings allowing insight into such data. Access Services: Allows the representation/publishing of an access database as a SharePoint 2010 site, leveraging many SharePoint features. Reporting services is used by Access services. Secure Store Service: The SP2010 Secure store service is a replacement for the SP2007 single sign on feature. This acts as a credential policeman providing credentials to various applications running with SharePoint. BCS, PerformancePoint Services, Excel Services, and many other apps use the SSS (Secure Store Service) for credential control. Comment on the article ....

  Read the article

• 7 reasons you had to be at JavaOne Latin America 2012

  - by Bruno.Borges

  Yesterday was 12/12/12, and everybody went crazy on Twitter with cool memes like this one. And maybe you are now wondering why I mentioned 7 (seven) on the blog title. Because I want to play numbers? Yes! Today is 7 days after JavaOne Latin America 2012 is over (... and I had to figure out an excuse for taking so long to blog about it...). So unless you were at JavaOne Latin America this year, here are 7 things you missed: OTN Lounge mini-theatreThere was a mini-theatre holding several lightning talks. We had people from SouJava JUG, GoJava JUG, Globalcode, and several other Java gurus and companies running demos, talks, and even more. For example, @drspockbr talked about the ScrumToys project, that demonstrates the power of JSF. Hands On Lab for JAX-RS and WebSocketsOne of the cool things to do during JavaOne is to come to these Hands On labs and really do something using new technologies with the help of experts. This one in particular, was covered by me, Arun Gupta, and Reza Rahman. The HOL had more people than laptops (and we had 48 laptops!) interested on understanding and learning about the new stuff that is coming within Java EE 7. Things like JAX-RS, Server-sent Events and WebSockets. Hey, if you want to try this HOL by yourself, it is available on Github, so go for it! If you have questions, just let me know! Java Community KeynoteThis keynote presented a lot of cool things like startups using Java in their projects, the Duke Awards, SouJava winning the JCP Outstanding Award, the Java Band, and even more! It was really a space where the Java community could present what they are doing and what they want to do. There's a lot of interest on the Adopt-a-JSR program and the Adopt-OpenJDK. There's also an Adopt-a-JavaEE-JSR program! Take a look if you want to participate and Make the Future Java. Java EE (JMS, JAX-RS) sessions from Reza Rahman, the HeavyMetal guyReza is a well know professional and Java EE enthusiast from the communitty who just joined Oracle this year. His sessions were very well attended, perhaps because of a high interest on the new things coming to Java EE 7 like JMS 2.0 and JAX-RS 2.0. If you want to look at what he did at this JavaOne edition, read his blog post. By the way, if you like Java and heavymetal, you should follow him on Twitter as well! :-) Java EE (WebSockets, HTML5) sessions from Arun Gupta, the GlassFish guyIf you don't know Arun Gupta, no worries. You will have time to know about him while you read his Java EE 6 Pocket Guide. Arun has been evangelizing Java EE for a long time, and is now spreading his word about the new upcoming version Java EE 7. He gave one talk about HTML5 Productivity on the Java EE 7 platform, and another one on building web apps with WebSockets. Pretty neat! Arun blogged about JavaOne Latin America as well. Read it here. Java Embedded and JavaFXIf there are two things that are really trending in the Java World right now besides Java EE 7, certainly they are JavaFX and Java Embedded. There were 14 talks covering Java Embedded, from Java Cards to Raspberry.pi, from Java ME to Java on your TV with Ginga-J. The Internet of Things is becoming true, and Java is the only platform today that can connect it all in an standardized and concise way. JavaFX gained a lot of attention too. There were 8 sessions covering what the platform has to offer in terms of Rich User Experience. The JavaFX Scene Builder is an awesome tool to start playing designing an UI, and coding for JavaFX is like coding Swing with 8 hands, one holding your coffee cup. You can achieve a lot, with your two hands (unless, you really have 8 hands, then you can achieve 4 times more :-). If you want to read more about JavaFX, go to Stephen Chin's blog post. GlassFish and Friends Party, 1st edition at JavaOne Lating AmericaThis is probably the thing that I'm most proud. We brought to Brasil the tradition of holding a happy hour for all GlassFish, Java EE friends. This party started almost 7 years ago in San Francisco, and it was about time to bring it to Brazil! The party happened on Tuesday night, right after JavaOne General Keynote, at the Tribeca Pub. We had about 80 attendees and met a lot of Java EE developers there! People from JUGs, Oracle, Locaweb and Red Hat showed up too, including some execs from Oracle that didn't resist and could not miss a party like this one.Lots of caipirinhas, beer and food to everyone, some cool music... even The Fish walking around the party with Juggy!You can see more photos from the party on an album I shared with the recently created GlassFish Brasil community on Google+ here (but you may be more interested in joining the GlassFish english community). There's also more pictures that Arun took and shared on this link. So now you may want to consider coming to Brazil next year! Java EE 7 is on its way, and Brazil is happily and patiently waiting for it, with a lot of enthusiasm. By the way, GlassFish and Java EE 6 just celebrated a Happy Birthday!

  Read the article

• using isight camera in macbookpro(8,2) on ubuntu 12.04 virtualbox VM

  - by Kurt Spindler

  I'm having a lot of trouble using the built-in isight camera on my macbookpro8,2 (early 2011) from an ubuntu 12.04 virtual machine, run inside VirtualBox. The following is the log I get when I try to run guvcview ubuntu@ubuntu:~$ guvcview guvcview 1.5.3 ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.center_lfe ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.surround71 ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'IEC958 Playback Default',0,0,0): No such file or directory ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.hdmi ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.modem ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline ALSA lib pcm.c:2217:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.phoneline ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib audio/pcm_bluetooth.c:1614:(audioservice_expect) BT_GET_CAPABILITIES failed : Input/output error(5) ALSA lib pcm_dmix.c:957:(snd_pcm_dmix_open) The dmix plugin supports only playback stream Cannot connect to server socket err = No such file or directory Cannot connect to server socket jack server is not running or cannot be started video device: /dev/video0 Init. FaceTime HD Camera (Built-in) (location: usb-0000:00:0b.0-1) { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 1/10, { pixelformat = 'MJPG', description = 'MJPEG' } { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'RGB3', description = 'RGB3' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'BGR3', description = 'BGR3' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'YU12', description = 'YU12' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { pixelformat = 'YV12', description = 'YV12' } { discrete: width = 160, height = 120 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 176, height = 144 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 320, height = 240 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 352, height = 288 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 640, height = 480 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1280, height = 720 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 960, height = 540 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, { discrete: width = 1024, height = 576 } Time interval between frame: 100/2997, 1/25, 1/24, 1/15, vid:05ac pid:8509 driver:uvcvideo checking format: 1196444237 VIDIOC_G_COMP:: Invalid argument compression control not supported fps is set to 1/25 drawing controls no codec detected for H264 no codec detected for MP3 - (lavc) Checking video mode 960x540@32bpp : OK Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable Could not grab image (select timeout): Resource temporarily unavailable write /home/ubuntu/.guvcviewrc OK free controls cleaned allocations - 100% Closing portaudio ...OK Closing GTK... OK ubuntu@ubuntu:~$ Any help would be greatly appreciated. Only clue I have is that I initially was having problems, tried using the old method of fixing isights (involving installing isight-firmware-tools) before realizing that I just hadn't turned on the VM setting to allow the VM to access the webcam. :) Anyway, I wonder if installing that messed something up. However, I think this is a red herring because I've: shut down and turned back on the Mac, restarted the VM, tried a different VM (for which I never installed isight-firmware-tools, and created an entirely new ubuntu vm. All instances have had this problem. Similarly, other viewers, such as cheese, avplay, avconv have had all various kinds of errors.

  Read the article

• Superpower Your Touchpad Computer with Scrybe

  - by Matthew Guay

  Are you looking for a way to help your Touchpad computer make you more productive?  Here’s a quick look at Scrybe, a new application from Synaptics that lets you superpower it. Touchpad devices have become increasingly more interesting as they’ve included support for multi-touch gestures.  Scrybe takes it to the next level and lets you use your touchpad as an application launcher.  You can launch any application, website, or complete many common commands on your computer with a simple gesture.  Scrybe works with most modern Synaptics touchpads, which are standard on most laptops and netbooks.  It is optimized for newer multi-touch touchpads, but can also work with standard single-touch touchpads.  It works on Windows 7, Vista, and XP, so chances are it will work with your laptop or netbook. Get Started With Scrybe Head over to the Scrybe website and download the latest version (link below).  You are asked to enter your email address, name, and information about your computer…but you actually only have to enter your email address.  Click Download when finished. Run the installer when it’s download.  It will automatically download the latest Synaptics driver for your touchpad and any other components needed for Scrybe.  Note that the Scrybe installer will ask to install the Yahoo! toolbar, so uncheck this to avoid adding this worthless browser toolbar. Using Scrybe To open an application or website with a gesture, press 3 fingers on your touchpad at once, or if your touchpad doesn’t support multi-touch gestures, then press Ctrl+Alt and press 1 finger on your touchpad.  This will open the Scrype input pane; start drawing a gesture, and you’ll see it on the grey square.  The input pane shows some default gestures you can try. Here we drew an “M”, which opens our default Music player.  As soon as you finish the gesture and lift up your finger, Scrybe will open the application or website you selected. A notification balloon will let you know what gesture was preformed. When you’re entering your gesture, the input pane will show white “ink”.  The “ink” will turn blue if the command is recognized, but will turn red if it isn’t.  If Scrybe doesn’t recognize your command, press 3 fingers and try again. Scrybe Control Panel You can open the Scrybe Control panel to enter or change commands by entering a box-like gesture, or right-clicking the Scrybe icon in your system tray and selecting “Scrybe Control Panel”. Scrybe has many pre-configured gestures that you can preview and even practice. All of the gestures in the Popular tab are preset and cannot be changed.  However, the ones in the favorites tab can be edited.  Select the gesture you wish to edit, and click the gear icon to change it.  Here we changed the email gesture to open Hotmail instead of the default Yahoo Mail. Scrybe can also help you perform many common Windows commands such as Copy and Undo.  Select the Tools tab to see all of these commands.   Scrybe has many settings you may wish to change.  Select the Preferences button in the Control Panel to change these.  Here’s some of the settings we changed. Uncheck “Display a message” to turn off the tooltip notifications when you enter a gesture Uncheck “Show symbol hints” to turn off the sidebar on the input pane Select the search engine you want to open with the Search Gesture.  The default is Yahoo, but you can choose your favorite. Adding a new Scrybe Gesture The default Scrybe options are useful, but the best part is that you can assign gestures to your own programs or websites.  Open the Scrybe control panel, and click the plus sign on the bottom left corner.  Enter a name for your gesture, and then choose if it is for a website or an application. If you want the gesture to open a website, enter the address in the box. Alternately, if you want your gesture to open an application, select Launch Application and then either enter the path to the application, or click the button beside the Launch field and browse to it. Now click the down arrow on the blue box and choose one of the gestures for your application or website. Your new gesture will show up under the Favorites tab in the Scrybe control panel, and you can use it whenever you want from Scrybe, or practice the gesture by selecting the Practice button. Conclusion If you enjoy multi-touch gestures, you may find Scrybe very useful on your laptop or netbook.  Scrybe recognizes gestures fairly easily, even if you don’t enter them perfectly correctly.  Just like pinch-to-zoom and two-finger scroll, Scrybe can quickly become something you miss on other laptops. Download Scrybe (registration required) Similar Articles Productive Geek Tips Fixing Firefox Scrolling Problems with Dell Synaptics TouchpadRemove Synaptics Touchpad Icon from System TrayRoll Back Troublesome Device Drivers in Windows VistaChange Your Computer Name in Windows 7 or VistaLet Somebody Use Your Computer Without Logging Off in Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

  Read the article

• Dynamically switching the theme in Orchard

  - by Bertrand Le Roy

  It may sound a little puzzling at first, but in Orchard CMS, more than one theme can be active at any given time. The reason for that is that we have an extensibility point that allows a module (or a theme) to participate in the choice of the theme to use, for each request. The motivation for building the theme engine this way was to enable developers to switch themes based on arbitrary criteria, such as user preferences or the user agent (if you want to serve a mobile theme for phones for example). The choice is made between the active themes, which is why there is a difference between the default theme and the active themes. In order to have a say in the choice of the theme, all you have to do is implement IThemeSelector. That interface is quite simple as it only has one method, GetTheme, that takes the current RequestContext and returns a ThemeSelectorResult or null if the implementation of the interface does not want to participate in the current request (we'll see an example in a moment). ThemeSelectorResult itself is just a ThemeName string property and an integer Priority. We're using a priority so that an arbitrary number of implementations of IThemeSelector can contribute to the choice of a theme. If you look for existing implementations of the interface in Orchard, you'll find four: AdminThemeSelector: selects the TheAdmin theme with a very high priority (100) if the current request is for a page that is part of the admin. Otherwise, null is returned, which enables other implementations to choose the theme. PreviewThemeSelector: selects the preview theme if there is one, with a high priority (90), and null otherwise. This enables administrators to view the site under a different theme while everybody else continues to see the current default theme. SiteThemeSelector: this is the implementation that is doing what you expect most of the time, which is to get the current theme from site settings and set it with a priority of –5. SafeModeThemeSelector: this is the fallback implementation, which should almost never win. It sets the theme as the safe mode theme, which has no style and just uses the default templates for everything. The priority is very low (-100). While this extensibility mechanism is great to have, I wanted to bring that level of choice into the hands of the site administrator rather than just developers. In order to achieve that, I built the Vandelay Theme Picker module. The module provides administration UI to create rules for theme selection. It provides its own extensibility point (the IThemeSelectionRule interface) and one implementation of a rule: UserAgentThemeSelectorRule. This rule gets the current user agent from the context and tries to match it with a regular expression that the administrator can configure in the admin UI. You can for example configure a rule with a regular expression that matches IE6 and serve a different subtheme where the stylesheet has been tweaked for such an antique browser. Another possible configuration is to detect mobile devices from their agent string and serve the mobile theme. All those operations can be done with this module entirely from the admin UI, without writing a line of code. The module also offers the administrator the opportunity to inject a link into the front-end in a specific zone and with a specific position that enables the user to switch to the default theme if he wishes to. This is especially useful for sites that use a mobile theme but still want to allow users to use the full desktop site. While the module is nice and flexible, it may be overkill. On my own personal blog, I have only two active themes: the desktop theme and the mobile theme. I'm fine with going into code to change the criteria on which to switch the theme, so I'm not using my own Theme Picker module. Instead, I made the mobile theme a theme with code (in other words there is a csproj file in the theme). The project includes a single C# file, my MobileThemeSelector for which the code is the following: public class MobileThemeSelector : IThemeSelector { private static readonly Regex _Msie678 = new Regex(@"^Mozilla\/4\.0 \(compatible; MSIE [678]" + @"\.0; Windows NT \d\.\d(.*)\)$", RegexOptions.IgnoreCase); private ThemeSelectorResult _requestCache; private bool _requestCached; public ThemeSelectorResult GetTheme(RequestContext context) { if (_requestCached) return _requestCache; _requestCached = true; var userAgent = context.HttpContext.Request.UserAgent; if (userAgent.IndexOf("phone", StringComparison.OrdinalIgnoreCase) != -1 || _Msie678.IsMatch(userAgent) || userAgent.IndexOf("windows live writer", StringComparison.OrdinalIgnoreCase) != -1) { _requestCache = new ThemeSelectorResult { Priority = 10, ThemeName = "VuLuMobile" }; } return _requestCache; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The theme selector selects the current theme for Internet Explorer versions 6 to 8, for phones, and for Windows Live Writer (so that the theme that is used when I write posts is as simple as possible). What's interesting here is that it's the theme that selects itself here, based on its own criteria. This should give you a good panorama of what's possible in terms of dynamic theme selection in Orchard. I hope you find some fun uses for it. As usual, I can't wait to see what you're going to come up with…

  Read the article

• Man pages not finding entry

  - by Mike

  So, I'm not sure what is going on with my system (ubuntu 12.04), but my man pages do not seem to be working. I try man gcc and get the following response No manual entry for gcc See 'man 7 undocumented' for help when manual pages are not available. However I see the man entry in /usr/share/man/man1/gcc.1.gz Here is what my /etc/manpath.config file looks like # manpath.config # # This file is used by the man-db package to configure the man and cat paths. # It is also used to provide a manpath for those without one by examining # their PATH environment variable. For details see the manpath(5) man page. # # Lines beginning with `#' are comments and are ignored. Any combination of # tabs or spaces may be used as `whitespace' separators. # # There are three mappings allowed in this file: # -------------------------------------------------------- # MANDATORY_MANPATH manpath_element # MANPATH_MAP path_element manpath_element # MANDB_MAP global_manpath [relative_catpath] #--------------------------------------------------------- # every automatically generated MANPATH includes these fields # #MANDATORY_MANPATH /usr/src/pvm3/man # MANDATORY_MANPATH /usr/man MANDATORY_MANPATH /usr/share/man MANDATORY_MANPATH /usr/local/share/man #--------------------------------------------------------- # set up PATH to MANPATH mapping # ie. what man tree holds man pages for what binary directory. # # *PATH* -> *MANPATH* # MANPATH_MAP /bin /usr/share/man MANPATH_MAP /usr/bin /usr/share/man MANPATH_MAP /sbin /usr/share/man MANPATH_MAP /usr/sbin /usr/share/man MANPATH_MAP /usr/local/bin /usr/local/man MANPATH_MAP /usr/local/bin /usr/local/share/man MANPATH_MAP /usr/local/sbin /usr/local/man MANPATH_MAP /usr/local/sbin /usr/local/share/man MANPATH_MAP /usr/X11R6/bin /usr/X11R6/man MANPATH_MAP /usr/bin/X11 /usr/X11R6/man MANPATH_MAP /usr/games /usr/share/man MANPATH_MAP /opt/bin /opt/man MANPATH_MAP /opt/sbin /opt/man #--------------------------------------------------------- # For a manpath element to be treated as a system manpath (as most of those # above should normally be), it must be mentioned below. Each line may have # an optional extra string indicating the catpath associated with the # manpath. If no catpath string is used, the catpath will default to the # given manpath. # # You *must* provide all system manpaths, including manpaths for alternate # operating systems, locale specific manpaths, and combinations of both, if # they exist, otherwise the permissions of the user running man/mandb will # be used to manipulate the manual pages. Also, mandb will not initialise # the database cache for any manpaths not mentioned below unless explicitly # requested to do so. # # In a per-user configuration file, this directive only controls the # location of catpaths and the creation of database caches; it has no effect # on privileges. # # Any manpaths that are subdirectories of other manpaths must be mentioned # *before* the containing manpath. E.g. /usr/man/preformat must be listed # before /usr/man. # # *MANPATH* -> *CATPATH* # MANDB_MAP /usr/man /var/cache/man/fsstnd MANDB_MAP /usr/share/man /var/cache/man MANDB_MAP /usr/local/man /var/cache/man/oldlocal MANDB_MAP /usr/local/share/man /var/cache/man/local MANDB_MAP /usr/X11R6/man /var/cache/man/X11R6 MANDB_MAP /opt/man /var/cache/man/opt # #--------------------------------------------------------- # Program definitions. These are commented out by default as the value # of the definition is already the default. To change: uncomment a # definition and modify it. # #DEFINE pager pager -s #DEFINE cat cat #DEFINE tr tr '\255\267\264\327' '\055\157\047\170' #DEFINE grep grep #DEFINE troff groff -mandoc #DEFINE nroff nroff -mandoc #DEFINE eqn eqn #DEFINE neqn neqn #DEFINE tbl tbl #DEFINE col col #DEFINE vgrind vgrind #DEFINE refer refer #DEFINE grap grap #DEFINE pic pic -S # #DEFINE compressor gzip -c7 #--------------------------------------------------------- # Misc definitions: same as program definitions above. # #DEFINE whatis_grep_flags -i #DEFINE apropos_grep_flags -iEw #DEFINE apropos_regex_grep_flags -iE #--------------------------------------------------------- # Section names. Manual sections will be searched in the order listed here; # the default is 1, n, l, 8, 3, 0, 2, 5, 4, 9, 6, 7. Multiple SECTION # directives may be given for clarity, and will be concatenated together in # the expected way. # If a particular extension is not in this list (say, 1mh), it will be # displayed with the rest of the section it belongs to. The effect of this # is that you only need to explicitly list extensions if you want to force a # particular order. Sections with extensions should usually be adjacent to # their main section (e.g. "1 1mh 8 ..."). # SECTION 1 n l 8 3 2 3posix 3pm 3perl 5 4 9 6 7 # #--------------------------------------------------------- # Range of terminal widths permitted when displaying cat pages. If the # terminal falls outside this range, cat pages will not be created (if # missing) or displayed. # #MINCATWIDTH 80 #MAXCATWIDTH 80 # # If CATWIDTH is set to a non-zero number, cat pages will always be # formatted for a terminal of the given width, regardless of the width of # the terminal actually being used. This should generally be within the # range set by MINCATWIDTH and MAXCATWIDTH. # #CATWIDTH 0 # #--------------------------------------------------------- # Flags. # NOCACHE keeps man from creating cat pages. #NOCACHE Thanks for any help (p.s. even 'man man' fails) Edit: When I run ls -l /usr/share/man/man1/gcc* I get the following output lrwxrwxrwx 1 root root 12 May 27 15:41 /usr/share/man/man1/gcc.1.gz -> gcc-4.6.1.gz -rw-r--r-- 1 root root 217776 Apr 15 17:34 /usr/share/man/man1/gcc-4.6.1.gz

  Read the article

• Record Screen Activity with CamStudio

  - by Asian Angel

  Sometimes a visual demonstration works much better than a list of instructions. If you need to make a demo video for family and/or friends then you might want to have a look at CamStudio. Using CamStudio To get properly set up you will need to install two different files (the main program followed by the codec). Once that is done you are ready to get started. When you start the program you will see a surprisingly small window. Notice the highlighted Record to text…it serves as a visual indicator for the video type selected for recording. Before you start creating a video it would be a good idea to look through some of the settings. The first one to look at is the region or area that you want to record. Next you will want to look through the video options since these will affect the quality and final size of your video files. The default setting for quality is 70…adjust that to the level that best suits your needs. Note: For our example we maxed out the various video settings for best quality. On our system Microsoft Video 1 was listed as the default compressor but as you can see there were other options available. You can configure the settings for the compressor you want to use if desired. Keep in mind that each compressor will have unique settings of their own, so if you change it, be certain to go back and check. We decided to use the CamStudio Lossless Codec for our example (it gave the best results while trying the software). Going back to the main window you can toggle back and forth between .avi and .swf output using the last button. Once you are satisfied with the settings click on the red record button to start. If you need to pause while recording or stop recording click on the system tray icon and select the appropriate command. When you are finished recording, you will be presented with the save file window. Browse for the desired save location and name your new file. Once you have saved the file the movie player window will automatically open so that you view your new video. Our sample video shown here is at 50% of original size so may look slightly “gritty”. The detail was much better at 100%. If you decide to record and save as .swf the process will be identical to recording in .avi format until the movie player window opens. At that time the conversion process from .avi to .swf will begin. When complete you will have a new flash video and html file that goes with it. Depending on which browser you have set as default, you may run into a small problem when the preview for your new .swf file tries to open. There is a small bug in the generated html file. You can use this work-around or… Just open the .swf file directly in your favorite browser. Conclusion CamStudio may not produce the highest quality videos, but it’s free and does a very nice job nonetheless. If you are working on a tight budget or only need to make an occasional video then CamStudio is a very sensible choice. Links Download CamStudio Stable Version & CamStudio Codec *Download links are approximately half-way down the page. Download CamStudio Stable Version & CamStudio Codec at SourceForge *Beta version also available here. Similar Articles Productive Geek Tips Get the Classic Style Network Activity Indicator Back in Windows 7How To Copy a DVD with VLC 1.0ALLCapture 3.0 [Review]Listen and Record Over 12,000 Online Radio Stations with RadioSureGeek Reviews: Play And Record Internet Radio With Screamer Radio TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox Filevo is a Cool File Hosting & Sharing Site Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate

  Read the article

• In the Groove: PASS Board Year 1, Q3

  - by Denise McInerney

  It's nine months into my first year on the PASS Board and I feel like I've found my rhythm. I've accomplished one of the goals I set out for the year and have made progress on others. Here's a recap of the last few months. Anti-Harassment Policy & Process Completed In April I began work on a Code of Conduct for the PASS Summit. The Board had several good discussions and various PASS members provided feedback. You can read more about that in this blog post. Since the document was focused on issues of harassment we renamed it the "Anti-Harassment Policy " and it was approved by the Board in August. The next step was to refine the guideliness and process for enforcement of the AHP. A subcommittee worked on this and presented an update to the Board at the September meeting. You can read more about that in this post, and you can find the process document here. Global Growth Expanding PASS' reach and making the organization relevant to SQL Server communities around the world has been a focus of the Board's work in 2012. We took the Global Growth initiative out to the community for feedback, and everyone on the Board participated, via Twitter chats, Town Hall meetings, feedback forums and in-person discussions. This community participation helped shape and refine our plans. Implementing the vision for Global Growth goes across all portfolios. The Virtual Chapters are well-positioned to help the organization move forward in this area. One outcome of the Global Growth discussions with the community is the expansion of two of the VCs from country-specific to language-specific. Thanks to the leadership in Brazil & Mexico for taking the lead here. I look forward to continued success for the Portuguese- and Spanish-language Virtual Chapters. Together with the Global Chinese VC PASS is off to a good start in making the VC's truly global. Virtual Chapters The VCs continue to grow and expand. Volunteers recently rebooted the Azure and Virutalization VCs, and a new  Education VC will be launching soon. Every week VCs offer excellent free training on a variety of topics. It's the dedication of the VC leaders and volunteers that make all this possible and I thank them for it. Board meeting The Board had an in-person meeting in September in San Diego, CA.. As usual we covered a number of topics including governance changes to support Global Growth, the upcoming Summit, 2013 events and the (then) upcoming PASS election. Next Up Much of the last couple of months has been focused on preparing for the PASS Summit in Seattle Nov. 6-9. I'll be there all week;  feel free to stop me if you have a question or concern, or just to introduce yourself.  Here are some of the places you can find me: VC Leaders Meeting Tuesday 8:00 am the VC leaders will have a meeting. We'll review some of the year's highlights and talk about plans for the next year Welcome Reception The VCs will be at the Welcome Reception in the new VC Lounge. Come by, learn more about what the VCs have to offer and meet others who share your interests. Exceptional DBA Awards Party I'm looking forward to seeing PASS Women in Tech VC leader Meredith Ryan receive her award at this event sponsored by Red Gate Session Presentation I will be presenting a spotlight session entitled "Stop Bad Data in Its OLTP Tracks" on Wednesday at 3:00 p.m. Exhibitor Reception This reception Wednesday evening in the Expo Hall is a great opportunity to learn more about tools and solutions that can help you in your job. Women in Tech Luncheon This year marks the 10th WIT Luncheon at PASS. I'm honored to be on the panel with Stefanie Higgins, Kevin Kline, Kendra Little and Jen Stirrup. This event is on Thursday at 11:30. Community Appreciation Party Thursday evening don't miss this event thanking all of you for everthing you do for PASS and the community. This year we will be at the Experience Music Project and it promises to be a fun party. Board Q & A Friday  9:45-11:15  am the members of the Board will be available to answer your questions. If you have a question for us, or want to hear what other members are thinking about, come by room 401 Friday morning.

  Read the article

• Weird y offset when using custom frag shader (Cocos2d-x)

  - by Mister Guacamole

  I'm trying to mask a sprite so I wrote a simple fragment shader that renders only the pixels that are not hidden under another texture (the mask). The problem is that it seems my texture has its y-coordinate offset after passing through the shader. This is the init method of the sprite (GroundZone) I want to mask: bool GroundZone::initWithSize(Size size) { // [...] // Setup the mask of the sprite m_mask = RenderTexture::create(textureWidth, textureHeight); m_mask->retain(); m_mask->setKeepMatrix(true); Texture2D *maskTexture = m_mask->getSprite()->getTexture(); maskTexture->setAliasTexParameters(); // Disable linear interpolation on the mask // Load the custom frag shader with a default vert shader as the sprite’s program FileUtils *fileUtils = FileUtils::getInstance(); string vertexSource = ccPositionTextureA8Color_vert; string fragmentSource = fileUtils->getStringFromFile( fileUtils->fullPathForFilename("CustomShader_AlphaMask_frag.fsh")); GLProgram *shader = new GLProgram; shader->initWithByteArrays(vertexSource.c_str(), fragmentSource.c_str()); shader->bindAttribLocation(GLProgram::ATTRIBUTE_NAME_POSITION, GLProgram::VERTEX_ATTRIB_POSITION); shader->bindAttribLocation(GLProgram::ATTRIBUTE_NAME_TEX_COORD, GLProgram::VERTEX_ATTRIB_TEX_COORDS); shader->link(); CHECK_GL_ERROR_DEBUG(); shader->updateUniforms(); CHECK_GL_ERROR_DEBUG(); int maskTexUniformLoc = shader->getUniformLocationForName("u_alphaMaskTexture"); shader->setUniformLocationWith1i(maskTexUniformLoc, 1); this->setShaderProgram(shader); shader->release(); // [...] } These are the custom drawing methods for actually drawing the mask over the sprite: You need to know that m_mask is modified externally by another class, the onDraw() method only render it. void GroundZone::draw(Renderer *renderer, const kmMat4 &transform, bool transformUpdated) { m_renderCommand.init(_globalZOrder); m_renderCommand.func = CC_CALLBACK_0(GroundZone::onDraw, this, transform, transformUpdated); renderer->addCommand(&m_renderCommand); Sprite::draw(renderer, transform, transformUpdated); } void GroundZone::onDraw(const kmMat4 &transform, bool transformUpdated) { GLProgram *shader = this->getShaderProgram(); shader->use(); glActiveTexture(GL_TEXTURE1); glBindTexture(GL_TEXTURE_2D, m_mask->getSprite()->getTexture()->getName()); glActiveTexture(GL_TEXTURE0); } Below is the method (located in another class, GroundLayer) that modify the mask by drawing a line from point start to point end. Both points are in Cocos2d coordinates (Point (0,0) is down-left). void GroundLayer::drawTunnel(Point start, Point end) { // To dig a line, we need first to get the texture of the zone we will be digging into. Then we get the // relative position of the start and end point in the zone's node space. Finally we use the custom shader to // draw a mask over the existing texture. for (auto it = _children.begin(); it != _children.end(); it++) { GroundZone *zone = static_cast<GroundZone *>(*it); Point nodeStart = zone->convertToNodeSpace(start); Point nodeEnd = zone->convertToNodeSpace(end); // Now that we have our two points converted to node space, it's easy to draw a mask that contains a line // going from the start point to the end point and that is then applied over the current texture. Size groundZoneSize = zone->getContentSize(); RenderTexture *rt = zone->getMask(); rt->begin(); { // Draw a line going from start and going to end in the texture, the line will act as a mask over the // existing texture DrawNode *line = DrawNode::create(); line->retain(); line->drawSegment(nodeStart, nodeEnd, 20, Color4F::RED); line->visit(); } rt->end(); } } Finally, here's the custom shader I wrote. #ifdef GL_ES precision mediump float; #endif varying vec2 v_texCoord; uniform sampler2D u_texture; uniform sampler2D u_alphaMaskTexture; void main() { float maskAlpha = texture2D(u_alphaMaskTexture, v_texCoord).a; float texAlpha = texture2D(u_texture, v_texCoord).a; float blendAlpha = (1.0 - maskAlpha) * texAlpha; // Show only where mask is invisible vec3 texColor = texture2D(u_texture, v_texCoord).rgb; gl_FragColor = vec4(texColor, blendAlpha); return; } I got a problem with the y coordinates. Indeed, it seems that once it has passed through my custom shader, the sprite's texture is not at the right place: Without custom shader (the sprite is the brown thing): With custom shader: What's going on here? Thanks :) EDIT It looks like after passing through the shader when I set the position of the sprite I set it in points, with (0,0) being in the top-right. Indeed, when I do sprite->setPosition(320, 480), the sprite is perfectly placed at the top of the screen.

  Read the article

• Yet another blog about IValueConverter

  - by codingbloke

  After my previous blog on a Generic Boolean Value Converter I thought I might as well blog up another IValueConverter implementation that I use. The Generic Boolean Value Converter effectively converters an input which only has two possible values to one of two corresponding objects.  The next logical step would be to create a similar converter that can take an input which has multiple (but finite and discrete) values to one of multiple corresponding objects.  To put it more simply a Generic Enum Value Converter. Now we already have a tool that can help us in this area, the ResourceDictionary.  A simple IValueConverter implementation around it would create a StringToObjectConverter like so:- StringToObjectConverter using System; using System.Windows; using System.Windows.Data; using System.Linq; using System.Windows.Markup; namespace SilverlightApplication1 {     [ContentProperty("Items")]     public class StringToObjectConverter : IValueConverter     {         public ResourceDictionary Items { get; set; }         public string DefaultKey { get; set; }                  public StringToObjectConverter()         {             DefaultKey = "__default__";         }         public virtual object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)         {             if (value != null && Items.Contains(value.ToString()))                 return Items[value.ToString()];             else                 return Items[DefaultKey];         }         public virtual object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)         {             return Items.FirstOrDefault(kvp => value.Equals(kvp.Value)).Key;         }     } } There are some things to note here.  The bulk of managing the relationship between an object instance and the related string key is handled by the Items property being an ResourceDictionary.  Also there is a catch all “__default__” key value which allows for only a subset of the possible input values to mapped to an object with the rest falling through to the default. We can then set one of these up in Xaml:-             <local:StringToObjectConverter x:Key="StatusToBrush">                 <ResourceDictionary>                     <SolidColorBrush Color="Red" x:Key="Overdue" />                     <SolidColorBrush Color="Orange" x:Key="Urgent" />                     <SolidColorBrush Color="Silver" x:Key="__default__" />                 </ResourceDictionary>             </local:StringToObjectConverter> You could well imagine that in the model being bound these key names would actually be members of an enum.  This still works due to the use of ToString in the Convert method.  Hence the only requirement for the incoming object is that it has a ToString implementation which generates a sensible string instead of simply the type name. I can’t imagine right now a scenario where this converter would be used in a TwoWay binding but there is no reason why it can’t.  I prefer to avoid leaving the ConvertBack throwing an exception if that can be be avoided.  Hence it just enumerates the KeyValuePair entries to find a value that matches and returns the key its mapped to. Ah but now my sense of balance is assaulted again.  Whilst StringToObjectConverter is quite happy to accept an enum type via the Convert method it returns a string from the ConvertBack method not the original input enum type that arrived in the Convert.  Now I could address this by complicating the ConvertBack method and examining the targetType parameter etc.  However I prefer to a different approach, deriving a new EnumToObjectConverter class instead. EnumToObjectConverter using System; namespace SilverlightApplication1 {     public class EnumToObjectConverter : StringToObjectConverter     {         public override object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)         {             string key = Enum.GetName(value.GetType(), value);             return base.Convert(key, targetType, parameter, culture);         }         public override object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture)         {             string key = (string)base.ConvertBack(value, typeof(String), parameter, culture);             return Enum.Parse(targetType, key, false);         }     } }   This is a more belts and braces solution with specific use of Enum.GetName and Enum.Parse.  Whilst its more explicit in that the a developer has to  choose to use it, it is only really necessary when using TwoWay binding, in OneWay binding the base StringToObjectConverter would serve just as well. The observant might note that there is actually no “Generic” aspect to this solution in the end.  The use of a ResourceDictionary eliminates the need for that.

  Read the article

• In the Mobile and Tablet World, How Much is Too Much?

  - by andrewbrust

  The week of April 26th was a huge one in the world of mobile and tablet devices,  There were so many individual developments, announcements and solidifications of strategy, it’s almost impossible to believe they occurred in the same month, let alone the same week. Things started with Apple and Gizmodo having a Law and Order moment over the latter’s procurement of what appears to be the former’s 4th gen iPhone prototype.  We found out on the 26th that Gizmodo blogger Jason Chen’s apartment was raided by police and, honestly, that was a bit much. But Apple didn’t stop there.  They also published Steve Job’s critique of Adobe Flash and his explanation of Cupertino’s embargo of Flash on iPhones, iPods and iPads.  If you ask me, this too, was a bit much. Apple finished up the week by releasing the 3G version of its iPad product to the US market. I like (iLike?) my WiFi iPad.  The idea of getting a version of it that required a second 3G service monthly subscription, is, well, a bit  much. Microsoft was in the news too.  It killed a project it hadn’t even acknowledged the existence of: the Courier tablet.  That’s a bit much too.  If a tree falls in the woods, and Microsoft says they can’t hear it anyway, could they really have chopped it down? Maybe Microsoft Research should have licensed some of Courier’s technology from other parts of Microsoft.  Then maybe they could have kept the product alive.  Ask HTC: they’re going to be licensing technology from Microsoft because Redmond insists that Google’s Android operating system infringes on certain of their patents.  And since HTC now builds a number of handsets on Android, instead of being beholden, as they once were, to Windows Mobile, that means they can keep making their products.  Why does HTC have to pay the royalties, and not Google?  Maybe Microsoft decided that going after GOOG would have been a bit much, even for them. The agreement came not a moment to soon: HTC released their “Droid Incredible” (that name’s a bit much), an Android 2.1 handset with amazing hardware and HTC’s own Sense UI, on April 30th (this past Friday). This phone is very well-reviewed.  Maybe that’s why Google basically decided to beg off introducing a version of its Nexus One phone (also manufactured by HTC) on the Verizon Wireless network.  Google backing down?  That’s incredible, if not also a bit much. And that brings us to HP.  Which this week announced its acquisition of Palm and its webOS mobile phone touch-oriented operating system.  HP also killed its own Slate initiative.  Apparently HP realized that Windows 7, even with a proprietary HP touch UI added on top, is no match for the iPad.  I’m guessing they think webOS might work a bit better,  And I’m wondering if HP even wants to use webOS for phone handsets, beyond the Pre and Pixi.  Using it just for slate devices would be a bit extreme, but maybe not too much. Honestly, this was not Microsoft’s best week.  It killed a project and a close partner did likewise.  Then that same partner bought a competing OS product, while another partner released their new product that uses yet another competing OS platform. What did Microsoft actually produce this past week? An update to its Windows Phone 7 developer tools that actually works with the version of Visual Studio 2010 released on April 12th, and the version of Silverlight released three days later. That took three weeks to get synced up, and that’s a bit much too. But at least it happened. Windows Phone 7 is Microsoft’s best hope for a comeback in the SmartPhone market and to offer a credible touch-based tablet device.  This week, two of Microsoft’s slate initiatives died, and its only mobile phone victory was around its competitor’s operating system.  I hope the new platform gets Redmond out of the PC ghetto and into the classes of device that get people really excited today.  If it can’t, that would be a bit much; probably too much.  And, as the signs at the Lonestar Cafe in NYC used to say, too much ain’t enough.

  Read the article

• Create Advanced Panoramas with Microsoft Image Composite Editor

  - by Matthew Guay

  Do you enjoy making panoramas with your pictures, but want more features than tools like Live Photo Gallery offer?  Here’s how you can create amazing panoramas for free with the Microsoft Image Composite Editor. Yesterday we took a look at creating panoramic photos in Windows Live Photo Gallery. Today we take a look at a free tool from Microsoft that will give you more advanced features to create your own masterpiece. Getting Started Download Microsoft Image Composite Editor from Microsoft Research (link below), and install as normal.  Note that there are separate version for 32 & 64-bit editions of Windows, so make sure to download the correct one for your computer. Once it’s installed, you can proceed to create awesome panoramas and extremely large image combinations with it.  Microsoft Image Composite Editor integrates with Live Photo Gallery, so you can create more advanced panoramic pictures directly.  Select the pictures you want to combine, click Extras in the menu bar, and select Create Image Composite. You can also create a photo stitch directly from Explorer.  Select the pictures you want to combine, right-click, and select Stitch Images… Or, simply launch the Image Composite Editor itself and drag your pictures into its editor.  Either way you start a image composition, the program will automatically analyze and combine your images.  This application is optimized for multiple cores, and we found it much faster than other panorama tools such as Live Photo Gallery. Within seconds, you’ll see your panorama in the top preview pane. From the bottom of the window, you can choose a different camera motion which will change how the program stitches the pictures together.  You can also quickly crop the picture to the size you want, or use Automatic Crop to have the program select the maximum area with a continuous picture.   Here’s how our panorama looked when we switched the Camera Motion to Planar Motion 2. But, the real tweaking comes in when you adjust the panorama’s projection and orientation.  Click the box button at the top to change these settings. The panorama is now overlaid with a grid, and you can drag the corners and edges of the panorama to change its shape. Or, from the Projection button at the top, you can choose different projection modes. Here we’ve chosen Cylinder (Vertical), which entirely removed the warp on the walls in the image.  You can pan around the image, and get the part you find most important in the center.  Click the Apply button on the top when you’re finished making changes, or click Revert if you want to switch to the default view settings. Once you’ve finished your masterpiece, you can export it easily to common photo formats from the Export panel on the bottom.  You can choose to scale the image or set it to a maximum width and height as well.  Click Export to disk to save the photo to your computer, or select Publish to Photosynth to post your panorama online. Alternately, from the File menu you can choose to save the panorama as .spj file.  This preserves all of your settings in the Image Composite Editor so you can edit it more in the future if you wish.   Conclusion Whether you’re trying to capture the inside of a building or a tall tree, the extra tools in Microsoft Image Composite Editor let you make nicer panoramas than you ever thought possible.  We found the final results surprisingly accurate to the real buildings and objects, especially after tweaking the projection modes.  This tool can be both fun and useful, so give it a try and let us know what you’ve found it useful for. Works with 32 & 64-bit versions of XP, Vista, and Windows 7 Link Download Microsoft Image Composite Editor Similar Articles Productive Geek Tips Change or Set the Greasemonkey Script Editor in FirefoxNew Vista Syntax for Opening Control Panel Items from the Command-lineTune Your ClearType Font Settings in Windows VistaChange the Default Editor From Nano on Ubuntu LinuxMake MSE Create a Restore Point Before Cleaning Malware TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor

  Read the article

• Trigger Happy

  - by Tim Dexter

  Its been a while, I know, we’ll say no more OK? I’ll just write …In the latest BIP 11.1.1.6 release and if I’m really honest; the release before this (we'll call it dot 5 for brevity.) The boys and gals in the engine room have been real busy enhancing BIP with some new functionality. Those of you that use the scheduling engine in OBIEE may already know and use the ‘conditional scheduling’ feature. This allows you to be more intelligent about what reports get run and sent to folks on a scheduled basis. You create a ‘trigger’ analysis (answer) that is executed at schedule time prior to the main report. When the schedule rolls around, the trigger is run, if it returns rows, then the main report is run and delivered. If there are no rows returned, then the main report is not run. Useful right? Your users are not bombarded with 20 reports in their inbox every week that they need to wade throu. They get a handful that they know they need to look at. If you ensure you use conditional formatting in the report then they can find the anomalous data in the reports very quickly and move on to the rest of their day more quickly. You could even think of OBIEE as a virtual team member, scouring the data on your behalf 24/7 and letting you know when its found an issue.BI Publisher, wanting the team t-shirt and the khaki pants, has followed suit. You can now set up ‘triggers’ for it to execute before it runs the main report. Just like its big brother, if the scheduled report trigger returns rows of data; it then executes the main report. Otherwise, the report is skipped until the next schedule time rolls around. Sound familiar?BIP differs a little, in that you only need to construct a query to act as the trigger rather than a complete report. Let assume we have a monthly wage by department report on a schedule. We only want to send the report to managers if their departmental wages reach and/or exceed a certain amount. The toughest part about this is coming up with the SQL to test the business rule you want to implement. For my example, its not that tough: select d.department_name, sum(e.salary) as wage_total from employees e, departments d where d.department_id = e.department_id group by d.department_name having sum(e.salary) > 230000 We're looking for departments where the wage cost is greater than 230,000 Dexter Dollars! With a bit of messing I found out you can parametrize the query. Users can then set a value at schedule time if they need to. To create the trigger is straightforward enough. You can create multiple triggers for users to select at schedule time. Notice I also used a parameter in the query, :wamount. Note the matching parameter in the tree on the left. You also dont need to return multiple columns, one is fine, the key is if there are rows returned. You can build the rest of your report as usual. At scheduling time the Schedule tab has a bit more on it. If your users want to set the trigger, they check the Use Trigger box. The page will then pop fields to pick the appropriate trigger they want to use, even a trigger on another data model if needed. Note it will also ask for the parameter value associated with the trigger. At this point you should note that the data model does not make a distinction between trigger and data model (extract) parameters. So users will see the parameters on the General and Schedule tabs. If per chance you do need to just have a trigger parameters. You can just hide them from the report using the Parameters popup in the report designer, just un-check the 'Show' box I have tested the opposite case where you do not want main report parameters seen in the trigger section. BIP handles that for you! Once the report hits its allotted schedule time, the trigger is executed. Based on the results the report will either run or be 'skipped.' Now, you have a smarter scheduler that will only deliver reports when folks need to see them and take action on the contents. More official info here for developers and here for users.

  Read the article

• Justifiable Perks.

  - by Phil Factor

      I was once the director of a start-up IT Company, and had the task of recruiting a proportion of the management team. As my background was in IT management, I was rather more familiar with recruiting Geeks for technology jobs, but here, one of my early tasks was interviewing a Marketing Director.  The small group of financiers had suggested a rather strange Irishman called  Halleran.  From my background in City of London dealing-rooms, I was slightly unprepared for the experience of interviewing anyone wearing a pink suit. Many of my older City colleagues would have required resuscitation after seeing his white leather shoes. However, nobody will accuse me of prejudging an interviewee. After all, many Linux experts who I’ve come to rely on have appeared for interview dressed as hobbits. In fact, the interview went well, and we had even settled his salary.  I was somewhat unprepared for the coda.    ‘And I will need to be provided with a Ferrari  by the company.’    ‘Hmm. That seems reasonable.’    Initially, he looked startled, and then a slow smile of victory spread across his face.    ‘What colour would you like?’ I asked genially.    ‘It has to be red.’ He looked very earnest on this point.    ‘Fine. I have to go past Hamleys on the way home this evening, so I’ll pick one up then for you.’    ‘Er.. Hamley’s is a toyshop, not a Ferrari Dealership.’    I stared at him in bafflement for a few seconds. ‘You’re not seriously asking for a real Ferrari are you?’     ‘Well, yes. Not for my own sake, you understand. I’d much prefer a simple run-about, but my position demands it. How could I maintain the necessary status in the office without one? How could I do my job in marketing when my grey Datsun was all too visible in the car Park? It is a tool of the job.’    ‘Excuse me a moment, but I must confer with the MD’    I popped out to see Chris, the MD. ‘Chris, I’m interviewing a lunatic in a pink suit who is trying to demand that a Ferrari is a precondition of his employment. I tried the ‘misunderstanding trick’ but it didn’t faze him.’     ‘Sorry, Phil, but we’ve got to hire him. The VCs insist on it. You’ve got to think of something that doesn’t involve committing to the purchase of a Ferrari. Current funding barely covers the rent for the building.’    ‘OK boss. Leave it to me.’    On return, I slapped O’Halleran’s file on the table with a genial, paternalistic smile. ‘Of course you should have a Ferrari. The only trouble is that it will require a justification document that can be presented to the board. I’m sure you’ll have no problem in preparing this document in the required format.’ The initial look of despair was quickly followed by a bland look of acquiescence. He had, earlier in the interview, argued with great eloquence his skill in preparing the tiresome documents that underpin the essential corporate and government deals that were vital to the success of this new enterprise. The justification of a Ferrari should be a doddle.     After the interview, Chris nervously asked how I’d fared.     ‘I think it is all solved.’    ‘… without promising a Ferrari, I hope.’    ‘Well, I did actually; on condition he justified it in writing.’    Chris issued a stream of invective. The strain of juggling the resources in an underfunded startup was beginning to show.    ‘Don’t worry. In the unlikely event of him coming back with the required document, I’ll give him mine.’    ‘Yours?’ He strode over to the window to stare down at the car park.    He needn’t have worried: I knew that his breed of marketing man could more easily lay an ostrich egg than to prepare a decent justification document. My Ferrari is still there at the back of my garage. Few know of the Ferrari cultivator, a simple inexpensive motorized device designed for the subsistence farmers of southern Italy. It is the very devil to start, but it creates a perfect tilth for the seedbed.

  Read the article

• How to label a cuboid?

  - by usha

  Hi this is how my 3dcuboid looks, I have attached the complete code. I want to label this cuboid using different names across sides, how is this possible using opengl on android? public class MyGLRenderer implements Renderer { Context context; Cuboid rect; private float mCubeRotation; // private static float angleCube = 0; // Rotational angle in degree for cube (NEW) // private static float speedCube = -1.5f; // Rotational speed for cube (NEW) public MyGLRenderer(Context context) { rect = new Cuboid(); this.context = context; } public void onDrawFrame(GL10 gl) { // TODO Auto-generated method stub gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT); gl.glLoadIdentity(); // Reset the model-view matrix gl.glTranslatef(0.2f, 0.0f, -8.0f); // Translate right and into the screen gl.glScalef(0.8f, 0.8f, 0.8f); // Scale down (NEW) gl.glRotatef(mCubeRotation, 1.0f, 1.0f, 1.0f); // gl.glRotatef(angleCube, 1.0f, 1.0f, 1.0f); // rotate about the axis (1,1,1) (NEW) rect.draw(gl); mCubeRotation -= 0.15f; //angleCube += speedCube; } public void onSurfaceChanged(GL10 gl, int width, int height) { // TODO Auto-generated method stub if (height == 0) height = 1; // To prevent divide by zero float aspect = (float)width / height; // Set the viewport (display area) to cover the entire window gl.glViewport(0, 0, width, height); // Setup perspective projection, with aspect ratio matches viewport gl.glMatrixMode(GL10.GL_PROJECTION); // Select projection matrix gl.glLoadIdentity(); // Reset projection matrix // Use perspective projection GLU.gluPerspective(gl, 45, aspect, 0.1f, 100.f); gl.glMatrixMode(GL10.GL_MODELVIEW); // Select model-view matrix gl.glLoadIdentity(); // Reset } public void onSurfaceCreated(GL10 gl, EGLConfig config) { // TODO Auto-generated method stub gl.glClearColor(0.0f, 0.0f, 0.0f, 1.0f); // Set color's clear-value to black gl.glClearDepthf(1.0f); // Set depth's clear-value to farthest gl.glEnable(GL10.GL_DEPTH_TEST); // Enables depth-buffer for hidden surface removal gl.glDepthFunc(GL10.GL_LEQUAL); // The type of depth testing to do gl.glHint(GL10.GL_PERSPECTIVE_CORRECTION_HINT, GL10.GL_NICEST); // nice perspective view gl.glShadeModel(GL10.GL_SMOOTH); // Enable smooth shading of color gl.glDisable(GL10.GL_DITHER); // Disable dithering for better performance }} public class Cuboid{ private FloatBuffer mVertexBuffer; private FloatBuffer mColorBuffer; private ByteBuffer mIndexBuffer; private float vertices[] = { //width,height,depth -2.5f, -1.0f, -1.0f, 1.0f, -1.0f, -1.0f, 1.0f, 1.0f, -1.0f, -2.5f, 1.0f, -1.0f, -2.5f, -1.0f, 1.0f, 1.0f, -1.0f, 1.0f, 1.0f, 1.0f, 1.0f, -2.5f, 1.0f, 1.0f }; private float colors[] = { // R,G,B,A COLOR 0.0f, 1.0f, 0.0f, 1.0f, 0.0f, 1.0f, 0.0f, 1.0f, 1.0f, 0.5f, 0.0f, 1.0f, 1.0f, 0.5f, 0.0f, 1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 1.0f, 0.0f, 0.0f, 1.0f, 0.0f, 0.0f, 1.0f, 1.0f, 1.0f, 0.0f, 1.0f, 1.0f }; private byte indices[] = { // VERTEX 0,1,2,3,4,5,6,7 REPRESENTATION FOR FACES 0, 4, 5, 0, 5, 1, 1, 5, 6, 1, 6, 2, 2, 6, 7, 2, 7, 3, 3, 7, 4, 3, 4, 0, 4, 7, 6, 4, 6, 5, 3, 0, 1, 3, 1, 2 }; public Cuboid() { ByteBuffer byteBuf = ByteBuffer.allocateDirect(vertices.length * 4); byteBuf.order(ByteOrder.nativeOrder()); mVertexBuffer = byteBuf.asFloatBuffer(); mVertexBuffer.put(vertices); mVertexBuffer.position(0); byteBuf = ByteBuffer.allocateDirect(colors.length * 4); byteBuf.order(ByteOrder.nativeOrder()); mColorBuffer = byteBuf.asFloatBuffer(); mColorBuffer.put(colors); mColorBuffer.position(0); mIndexBuffer = ByteBuffer.allocateDirect(indices.length); mIndexBuffer.put(indices); mIndexBuffer.position(0); } public void draw(GL10 gl) { gl.glFrontFace(GL10.GL_CW); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, mVertexBuffer); gl.glColorPointer(4, GL10.GL_FLOAT, 0, mColorBuffer); gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_COLOR_ARRAY); gl.glDrawElements(GL10.GL_TRIANGLES, 36, GL10.GL_UNSIGNED_BYTE, mIndexBuffer); gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_COLOR_ARRAY); } } public class Draw3drect extends Activity { private GLSurfaceView glView; // Use GLSurfaceView // Call back when the activity is started, to initialize the view @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); glView = new GLSurfaceView(this); // Allocate a GLSurfaceView glView.setRenderer(new MyGLRenderer(this)); // Use a custom renderer this.setContentView(glView); // This activity sets to GLSurfaceView } // Call back when the activity is going into the background @Override protected void onPause() { super.onPause(); glView.onPause(); } // Call back after onPause() @Override protected void onResume() { super.onResume(); glView.onResume(); } }

  Read the article

• Problems with opening CHM Help files from Network or Internet

  - by Rick Strahl

  As a publisher of a Help Creation tool called Html Help Help Builder, I’ve seen a lot of problems with help files that won't properly display actual topic content and displays an error message for topics instead. Here’s the scenario: You go ahead and happily build your fancy, schmanzy Help File for your application and deploy it to your customer. Or alternately you've created a help file and you let your customers download them off the Internet directly or in a zip file. The customer downloads the file, opens the zip file and copies the help file contained in the zip file to disk. She then opens the help file and finds the following unfortunate result:     The help file  comes up with all topics in the tree on the left, but a Navigation to the WebPage was cancelled or Operation Aborted error in the Help Viewer's content window whenever you try to open a topic. The CHM file obviously opened since the topic list is there, but the Help Viewer refuses to display the content. Looks like a broken help file, right? But it's not - it's merely a Windows security 'feature' that tries to be overly helpful in protecting you. The reason this happens is because files downloaded off the Internet - including ZIP files and CHM files contained in those zip files - are marked as as coming from the Internet and so can potentially be malicious, so do not get browsing rights on the local machine – they can’t access local Web content, which is exactly what help topics are. If you look at the URL of a help topic you see something like this:   mk:@MSITStore:C:\wwapps\wwIPStuff\wwipstuff.chm::/indexpage.htm which points at a special Microsoft Url Moniker that in turn points the CHM file and a relative path within that HTML help file. Try pasting a URL like this into Internet Explorer and you'll see the help topic pop up in your browser (along with a warning most likely). Although the URL looks weird this still equates to a call to the local computer zone, the same as if you had navigated to a local file in IE which by default is not allowed.  Unfortunately, unlike Internet Explorer where you have the option of clicking a security toolbar, the CHM viewer simply refuses to load the page and you get an error page as shown above. How to Fix This - Unblock the Help File There's a workaround that lets you explicitly 'unblock' a CHM help file. To do this: Open Windows Explorer Find your CHM file Right click and select Properties Click the Unblock button on the General tab Here's what the dialog looks like:   Clicking the Unblock button basically, tells Windows that you approve this Help File and allows topics to be viewed.   Is this insecure? Not unless you're running a really old Version of Windows (XP pre-SP1). In recent versions of Windows Internet Explorer pops up various security dialogs or fires script errors when potentially malicious operations are accessed (like loading Active Controls), so it's relatively safe to run local content in the CHM viewer. Since most help files don't contain script or only load script that runs pure JavaScript access web resources this works fine without issues. How to avoid this Problem As an application developer there's a simple solution around this problem: Always install your Help Files with an Installer. The above security warning pop up because Windows can't validate the source of the CHM file. However, if the help file is installed as part of an installation the installation and all files associated with that installation including the help file are trusted. A fully installed Help File of an application works just fine because it is trusted by Windows. Summary It's annoying as all hell that this sort of obtrusive marking is necessary, but it's admittedly a necessary evil because of Microsoft's use of the insecure Internet Explorer engine that drives the CHM Html Engine's topic viewer. Because help files are viewing local content and script is allowed to execute in CHM files there's potential for malicious code hiding in CHM files and the above precautions are supposed to avoid any issues. © Rick Strahl, West Wind Technologies, 2005-2012 Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Some notes on Reflector 7

  - by CliveT

  Both Bart and I have blogged about some of the changes that we (and other members of the team) have made to .NET Reflector for version 7, including the new tabbed browsing model, the inclusion of Jason Haley's PowerCommands add-in and some improvements to decompilation such as handling iterator blocks. The intention of this blog post is to cover all of the main new features in one place, and to describe the three new editions of .NET Reflector 7. If you'd simply like to try out the latest version of the beta for yourself you can do so here. Three new editions .NET Reflector 7 will come in three new editions: .NET Reflector .NET Reflector VS .NET Reflector VSPro The first edition is just the standalone Windows application. The latter two editions include the Windows application, but also add the power of Reflector into Visual Studio so that you can save time switching tools and quickly get to the bottom of a debugging issue that involves third-party code. Let's take a look at some of the new features in each edition. Tabbed browsing .NET Reflector now has a tabbed browsing model, in which the individual tabs have independent histories. You can open a new tab to view the selected object by using CTRL+CLICK. I've found this really useful when I'm investigating a particular piece of code but then want to focus on some other methods that I find along the way. For version 7, we wanted to implement the basic idea of tabs to see whether it is something that users will find helpful. If it is something that enhances productivity, we will add more tab-based features in a future version. PowerCommands add-in We have also included Jason Haley's PowerCommands add-in as part of version 7. This add-in provides a number of useful commands, including support for opening .xap files and extracting the constituent assemblies, and a query editor that allows C# queries to be written and executed against the Reflector object model . All of the PowerCommands features can be turned on from the options menu. We will be really interested to see what people are finding useful for further integration into the main tool in the future. My personal favourite part of the PowerCommands add-in is the query editor. You can set up as many of your own queries as you like, but we provide 25 to get you started. These do useful things like listing all extension methods in a given assembly, and displaying other lower-level information, such as the number of times that a given method uses the box IL instruction. These queries can be extracted and then executed from the 'Run Query' context menu within the assembly explorer. Moreover, the queries can be loaded, modified, and saved using the built-in editor, allowing very specific user customization and sharing of queries. The PowerCommands add-in contains many other useful utilities. For example, you can open an item using an external application, work with enumeration bit flags, or generate assembly binding redirect files. You can see Bart's earlier post for a more complete list. .NET Reflector VS .NET Reflector VS adds a brand new Reflector object browser into Visual Studio to save you time opening .NET Reflector separately and browsing for an object. A 'Decompile and Explore' option is also added to the context menu of references in the Solution Explorer, so you don't need to leave Visual Studio to look through decompiled code. We've also added some simple navigation features to allow you to move through the decompiled code as quickly and easily as you can in .NET Reflector. When this is selected, the add-in decompiles the given assembly, Once the decompilation has finished, a clone of the Reflector assembly explorer can be used inside Visual Studio. When Reflector generates the source code, it records the location information. You can therefore navigate from the source file to other decompiled source using the 'Go To Definition' context menu item. This then takes you to the definition in another decompiled assembly. .NET Reflector VSPro .NET Reflector VSPro builds on the features in .NET Reflector VS to add the ability to debug any source code you decompile. When you decompile with .NET Reflector VSPro, a matching .pdb is generated, so you can use Visual Studio to debug the source code as if it were part of the project. You can now use all the standard debugging techniques that you are used to in the Visual Studio debugger, and step through decompiled code as if it were your own. Again, you can select assemblies for decompilation. They are then decompiled. And then you can debug as if they were one of your own source code files. The future of .NET Reflector As I have mentioned throughout this post, most of the new features in version 7 are exploratory steps and we will be watching feedback closely. Although we don't want to speculate now about any other new features or bugs that will or won't be fixed in the next few versions of .NET Reflector, Bart has mentioned in a previous post that there are lots of improvements we intend to make. We plan to do this with great care and without taking anything away from the simplicity of the core product. User experience is something that we pride ourselves on at Red Gate, and it is clear that Reflector is still a long way off our usual standards. We plan for the next few versions of Reflector to be worked on by some of our top usability specialists who have been involved with our other market-leading products such as the ANTS Profilers and SQL Compare. I re-iterate the need for the really great simple mode in .NET Reflector to remain intact regardless of any other improvements we are planning to make. I really hope that you enjoy using some of the new features in version 7 and that Reflector continues to be your favourite .NET development tool for a long time to come.

  Read the article

• C# async and actors

  - by Alex.Davies

  If you read my last post about async, you might be wondering what drove me to write such odd code in the first place. The short answer is that .NET Demon is written using NAct Actors. Actors are an old idea, which I believe deserve a renaissance under C# 5. The idea is to isolate each stateful object so that only one thread has access to its state at any point in time. That much should be familiar, it's equivalent to traditional lock-based synchronization. The different part is that actors pass "messages" to each other rather than calling a method and waiting for it to return. By doing that, each thread can only ever be holding one lock. This completely eliminates deadlocks, my least favourite concurrency problem. Most people who use actors take this quite literally, and there are plenty of frameworks which help you to create message classes and loops which can receive the messages, inspect what type of message they are, and process them accordingly. But I write C# for a reason. Do I really have to choose between using actors and everything I love about object orientation in C#? Type safety Interfaces Inheritance Generics As it turns out, no. You don't need to choose between messages and method calls. A method call makes a perfectly good message, as long as you don't wait for it to return. This is where asynchonous methods come in. I have used NAct for a while to wrap my objects in a proxy layer. As long as I followed the rule that methods must always return void, NAct queued up the call for later, and immediately released my thread. When I needed to get information out of other actors, I could use EventHandlers and callbacks (continuation passing style, for any CS geeks reading), and NAct would call me back in my isolated thread without blocking the actor that raised the event. Using callbacks looks horrible though. To remind you: m_BuildControl.FilterEnabledForBuilding(    projects,    enabledProjects = m_OutOfDateProjectFinder.FilterNeedsBuilding(        enabledProjects,             newDirtyProjects =             {                 ....... Which is why I'm really happy that NAct now supports async methods. Now, methods are allowed to return Task rather than just void. I can await those methods, and C# 5 will turn the rest of my method into a continuation for me. NAct will run the other method in the other actor's context, but will make sure that when my method resumes, we're back in my context. Neither actor was ever blocked waiting for the other one. Apart from when they were actually busy doing something, they were responsive to concurrent messages from other sources. To be fair, you could use async methods with lock statements to achieve exactly the same thing, but it's ugly. Here's a realistic example of an object that has a queue of data that gets passed to another object to be processed: class QueueProcessor {    private readonly ItemProcessor m_ItemProcessor = ...     private readonly object m_Sync = new object();    private Queue<object> m_DataQueue = ...    private List<object> m_Results = ...     public async Task ProcessOne() {         object data = null;         lock (m_Sync)         {             data = m_DataQueue.Dequeue();         }         var processedData = await m_ItemProcessor.ProcessData(data); lock (m_Sync)         {             m_Results.Add(processedData);         }     } } We needed to write two lock blocks, one to get the data to process, one to store the result. The worrying part is how easily we could have forgotten one of the locks. Compare that to the version using NAct: class QueueProcessorActor : IActor { private readonly ItemProcessor m_ItemProcessor = ... private Queue<object> m_DataQueue = ... private List<object> m_Results = ... public async Task ProcessOne()     {         // We are an actor, it's always thread-safe to access our private fields         var data = m_DataQueue.Dequeue();         var processedData = await m_ItemProcessor.ProcessData(data);         m_Results.Add(processedData);     } } You don't have to explicitly lock anywhere, NAct ensures that your code will only ever run on one thread, because it's an actor. Either way, async is definitely better than traditional synchronous code. Here's a diagram of what a typical synchronous implementation might do: The left side shows what is running on the thread that has the lock required to access the QueueProcessor's data. The red section is where that lock is held, but doesn't need to be. Contrast that with the async version we wrote above: Here, the lock is released in the middle. The QueueProcessor is free to do something else. Most importantly, even if the ItemProcessor sometimes calls the QueueProcessor, they can never deadlock waiting for each other. So I thoroughly recommend you use async for all code that has to wait a while for things. And if you find yourself writing lots of lock statements, think about using actors as well. Using actors and async together really takes the misery out of concurrent programming.

  Read the article

• Lessons learned from Word 2007 automation with c# 2008

  - by robertphyatt

  My organization has an ongoing project to take documents produced for internal regulations and such, change some of the formatting and then export it as PDF. Our requirements were that only one person would be doing this, but it has been painfully tedious and sometimes error-prone to do by hand. Enter the fearless developer to automate the situation! Since I am one of those guys that just plain does not like VB, I wanted to do the automation in the ever-so-much-more-familiar C#. While Microsoft had made a dll that makes such a task easier, documentation on MSDN is pretty lame and most of the forumns and posts on the internet had little to do with my task. So, I feel like I can give back to the community and make a post here of the things I have learned so far. I hope this is helpful to whoever stumbles upon it. Steps to do this: 1) First of all, make some sort of a project and use some sort of a means to get the filename of the word document you are trying to open. I got the filename the user wanted with an openFileDialog tied to a button that I labeled 'Browse':        private void btnBrowse_Click(object sender, EventArgs e)        {            try            {                DialogResult myResult = openFileDialog1.ShowDialog();                if (myResult.Equals(DialogResult.OK))                {                    if (openFileDialog1.SafeFileName.EndsWith(".doc"))                    {                        txtFileName.Text = openFileDialog1.SafeFileName;                        paramSourceDocPath = openFileDialog1.FileName;                        paramExportFilePath = openFileDialog1.FileName.Replace(".doc", ".pdf");                    }                    else                    {                        txtFileName.Text = "only something that end with .doc, please";                    }                }            }            catch (Exception err)            {                lblError.Text = err.Message;            }        }   2) Add in "using Microsoft.Office.Interop.Word;" after setting your project to reference Microsoft.Office.Core and Microsoft.Office.Interop.Word so that you don't have to add "Microsoft.Office.Interop.Word" to the front of everything. 3) Now you are ready to play. You will need to have a copy of word open and a copy of your word document that you want to modify open to be able to make the changes that are needed. The word interop dll likes using ref on all the parameters passed in, and likes to have them as objects. If you don't want to specify the parameter, you have to give it a "Type.Missing". I suggest creating some objects that you reuse all over the place to maintain sanity. object paramMissing = Type.Missing; ApplicationClass wordApplication = new ApplicationClass(); Document wordDocument = wordApplication.Documents.Open(                ref paramSourceDocPath, ref paramMissing, ref paramMissing,                ref paramMissing, ref paramMissing, ref paramMissing,                ref paramMissing, ref paramMissing, ref paramMissing,                ref paramMissing, ref paramMissing, ref paramMissing,                ref paramMissing, ref paramMissing, ref paramMissing,                ref paramMissing); 4) There are many ways to modify the text of the inside of the word document. One of the ways that was most effective for me was to break it down by paragraph and then do things on each paragraph by what style the particular paragraph had.            foreach (Paragraph thisParagraph in wordDocument.Content.Paragraphs)            {                string strStyleName = ((Style)thisParagraph.get_Style()).NameLocal;                string strText = thisParagraph.Range.Text;                //Do whatever you need to do            } 5) Sometimes you want to insert a new line character somewhere in the text or insert text into the document, etc.  There are a few ways you can do this: you can either modify the text of a paragraph by doing something like this ('\r' makes a new paragraph, '\v' will make a newline without making a new paragraph. If you remove a '\r' from the text, it will eliminate the paragraph you removed it from): thisParagraph.Range.Text = "A\vNew Paragraph!\r" + thisParagraph.Range.Text; OR you could select where you want to insert it and have it act like you were typing in Word like any normal user (note: if you do not collapse the range first, you will overwrite the thing you got the range from) object oCollapseDirectionEnd = WdCollapseDirection.wdCollapseEnd; object oCollapseDirectionStart = WdCollapseDirection.wdCollapseStart; Range rangeInsertAtBeginning = thisParagraph.Range; Range rangeInsertAtEnd = thisParagraph.Range; rangeInsertAtBeginning.Collapse(ref oCollapseDirectionStart); rangeInsertAtEnd.Collapse(ref oCollapseDirectionEnd); rangeInsertAtBeginning.Select(); wordApplication.Selection.TypeText("Blah Blah Blah"); rangeInsertAtEnd.Select(); wordApplication.Selection.TypeParagraph(); 6) If you want to make text columns, like a newspaper or newsletter, you have to modify the page layout of the document or a section of the document to make it happen. In my case, I only wanted a particular section to have that, and I wanted to have a black line before and after the newspaper-like text columns. First you need to do a section break on either side of what you wanted, then you take the section and modify the page layout. Then you can modify the borders of the section (or another object in the word document). I also show here how to modify the alignment of a paragraph.            object oSectionBreak = WdBreakType.wdSectionBreakContinuous;            //These ranges were set while I was going through the paragraphs of my document, like I was showing earlier            rangeHeaderStart.InsertBreak(ref oSectionBreak);            rangeHeaderEnd.InsertBreak(ref oSectionBreak);            //change the alignment to justify            object oRangeHeaderStart = rangeStartJustifiedAlignment.Start;            object oRangeHeaderEnd = rangeHeaderEnd.End;            Range rangeHeader = wordDocument.Range(ref oRangeHeaderStart, ref oRangeHeaderEnd);            rangeHeader.Paragraphs.Alignment = WdParagraphAlignment.wdAlignParagraphJustify;            //find the section break and make it into triple text columns            foreach (Section mySection in wordDocument.Sections)            {                if (mySection.Range.Start == rangeHeaderStart.Start)                {                    mySection.PageSetup.TextColumns.Add(ref paramMissing, ref paramMissing, ref paramMissing);                    mySection.PageSetup.TextColumns.Add(ref paramMissing, ref paramMissing, ref paramMissing);                    //I didn't like the default spacing and column widths. This is how I adjusted them.                    foreach (TextColumn txtc in mySection.PageSetup.TextColumns)                    {                        try                        {                            txtc.SpaceAfter = 151.6f;                            txtc.Width = 7;                        }                        catch (Exception)                        {                            txtc.Width = 151.6f;                        }                    }                }            } That is all  I have time for today! I hope this was helpful to someone!

  Read the article

< Previous Page | 439 440 441 442 443 444 445 446 447 448 449 450  | Next Page >